blob: 85f6d04f528b6fcbf57326117477e5dab9e686e1 [file] [log] [blame]
What: /sys/kernel/debug/habanalabs/hl<n>/addr
Date: Jan 2019
KernelVersion: 5.1
Contact: ogabbay@kernel.org
Description: Sets the device address to be used for read or write through
PCI bar, or the device VA of a host mapped memory to be read or
written directly from the host. The latter option is allowed
only when the IOMMU is disabled.
The acceptable value is a string that starts with "0x"
What: /sys/kernel/debug/habanalabs/hl<n>/clk_gate
Date: May 2020
KernelVersion: 5.8
Contact: ogabbay@kernel.org
Description: This setting is now deprecated as clock gating is handled solely by the f/w
What: /sys/kernel/debug/habanalabs/hl<n>/command_buffers
Date: Jan 2019
KernelVersion: 5.1
Contact: ogabbay@kernel.org
Description: Displays a list with information about the currently allocated
command buffers
What: /sys/kernel/debug/habanalabs/hl<n>/command_submission
Date: Jan 2019
KernelVersion: 5.1
Contact: ogabbay@kernel.org
Description: Displays a list with information about the currently active
command submissions
What: /sys/kernel/debug/habanalabs/hl<n>/command_submission_jobs
Date: Jan 2019
KernelVersion: 5.1
Contact: ogabbay@kernel.org
Description: Displays a list with detailed information about each JOB (CB) of
each active command submission
What: /sys/kernel/debug/habanalabs/hl<n>/data32
Date: Jan 2019
KernelVersion: 5.1
Contact: ogabbay@kernel.org
Description: Allows the root user to read or write directly through the
device's PCI bar. Writing to this file generates a write
transaction while reading from the file generates a read
transaction. This custom interface is needed (instead of using
the generic Linux user-space PCI mapping) because the DDR bar
is very small compared to the DDR memory and only the driver can
move the bar before and after the transaction.
If the IOMMU is disabled, it also allows the root user to read
or write from the host a device VA of a host mapped memory
What: /sys/kernel/debug/habanalabs/hl<n>/data64
Date: Jan 2020
KernelVersion: 5.6
Contact: ogabbay@kernel.org
Description: Allows the root user to read or write 64 bit data directly
through the device's PCI bar. Writing to this file generates a
write transaction while reading from the file generates a read
transaction. This custom interface is needed (instead of using
the generic Linux user-space PCI mapping) because the DDR bar
is very small compared to the DDR memory and only the driver can
move the bar before and after the transaction.
If the IOMMU is disabled, it also allows the root user to read
or write from the host a device VA of a host mapped memory
What: /sys/kernel/debug/habanalabs/hl<n>/data_dma
Date: Apr 2021
KernelVersion: 5.13
Contact: ogabbay@kernel.org
Description: Allows the root user to read from the device's internal
memory (DRAM/SRAM) through a DMA engine.
This property is a binary blob that contains the result of the
DMA transfer.
This custom interface is needed (instead of using the generic
Linux user-space PCI mapping) because the amount of internal
memory is huge (>32GB) and reading it via the PCI bar will take
a very long time.
This interface doesn't support concurrency in the same device.
In GAUDI and GOYA, this action can cause undefined behavior
in case the it is done while the device is executing user
workloads.
Only supported on GAUDI at this stage.
What: /sys/kernel/debug/habanalabs/hl<n>/device
Date: Jan 2019
KernelVersion: 5.1
Contact: ogabbay@kernel.org
Description: Enables the root user to set the device to specific state.
Valid values are "disable", "enable", "suspend", "resume".
User can read this property to see the valid values
What: /sys/kernel/debug/habanalabs/hl<n>/device_release_watchdog_timeout
Date: Oct 2022
KernelVersion: 6.2
Contact: ttayar@habana.ai
Description: The watchdog timeout value in seconds for a device relese upon
certain error cases, after which the device is reset.
What: /sys/kernel/debug/habanalabs/hl<n>/dma_size
Date: Apr 2021
KernelVersion: 5.13
Contact: ogabbay@kernel.org
Description: Specify the size of the DMA transaction when using DMA to read
from the device's internal memory. The value can not be larger
than 128MB. Writing to this value initiates the DMA transfer.
When the write is finished, the user can read the "data_dma"
blob
What: /sys/kernel/debug/habanalabs/hl<n>/dump_razwi_events
Date: Aug 2022
KernelVersion: 5.20
Contact: fkassabri@habana.ai
Description: Dumps all razwi events to dmesg if exist.
After reading the status register of an existing event
the routine will clear the status register.
Usage: cat dump_razwi_events
What: /sys/kernel/debug/habanalabs/hl<n>/dump_security_violations
Date: Jan 2021
KernelVersion: 5.12
Contact: ogabbay@kernel.org
Description: Dumps all security violations to dmesg. This will also ack
all security violations meanings those violations will not be
dumped next time user calls this API
What: /sys/kernel/debug/habanalabs/hl<n>/engines
Date: Jul 2019
KernelVersion: 5.3
Contact: ogabbay@kernel.org
Description: Displays the status registers values of the device engines and
their derived idle status
What: /sys/kernel/debug/habanalabs/hl<n>/i2c_addr
Date: Jan 2019
KernelVersion: 5.1
Contact: ogabbay@kernel.org
Description: Sets I2C device address for I2C transaction that is generated
by the device's CPU, Not available when device is loaded with secured
firmware
What: /sys/kernel/debug/habanalabs/hl<n>/i2c_bus
Date: Jan 2019
KernelVersion: 5.1
Contact: ogabbay@kernel.org
Description: Sets I2C bus address for I2C transaction that is generated by
the device's CPU, Not available when device is loaded with secured
firmware
What: /sys/kernel/debug/habanalabs/hl<n>/i2c_data
Date: Jan 2019
KernelVersion: 5.1
Contact: ogabbay@kernel.org
Description: Triggers an I2C transaction that is generated by the device's
CPU. Writing to this file generates a write transaction while
reading from the file generates a read transaction, Not available
when device is loaded with secured firmware
What: /sys/kernel/debug/habanalabs/hl<n>/i2c_len
Date: Dec 2021
KernelVersion: 5.17
Contact: obitton@habana.ai
Description: Sets I2C length in bytes for I2C transaction that is generated by
the device's CPU, Not available when device is loaded with secured
firmware
What: /sys/kernel/debug/habanalabs/hl<n>/i2c_reg
Date: Jan 2019
KernelVersion: 5.1
Contact: ogabbay@kernel.org
Description: Sets I2C register id for I2C transaction that is generated by
the device's CPU, Not available when device is loaded with secured
firmware
What: /sys/kernel/debug/habanalabs/hl<n>/led0
Date: Jan 2019
KernelVersion: 5.1
Contact: ogabbay@kernel.org
Description: Sets the state of the first S/W led on the device, Not available
when device is loaded with secured firmware
What: /sys/kernel/debug/habanalabs/hl<n>/led1
Date: Jan 2019
KernelVersion: 5.1
Contact: ogabbay@kernel.org
Description: Sets the state of the second S/W led on the device, Not available
when device is loaded with secured firmware
What: /sys/kernel/debug/habanalabs/hl<n>/led2
Date: Jan 2019
KernelVersion: 5.1
Contact: ogabbay@kernel.org
Description: Sets the state of the third S/W led on the device, Not available
when device is loaded with secured firmware
What: /sys/kernel/debug/habanalabs/hl<n>/memory_scrub
Date: May 2022
KernelVersion: 5.19
Contact: dhirschfeld@habana.ai
Description: Allows the root user to scrub the dram memory. The scrubbing
value can be set using the debugfs file memory_scrub_val.
What: /sys/kernel/debug/habanalabs/hl<n>/memory_scrub_val
Date: May 2022
KernelVersion: 5.19
Contact: dhirschfeld@habana.ai
Description: The value to which the dram will be set to when the user
scrubs the dram using 'memory_scrub' debugfs file and
the scrubbing value when using module param 'memory_scrub'
What: /sys/kernel/debug/habanalabs/hl<n>/mmu
Date: Jan 2019
KernelVersion: 5.1
Contact: ogabbay@kernel.org
Description: Displays the hop values and physical address for a given ASID
and virtual address. The user should write the ASID and VA into
the file and then read the file to get the result.
e.g. to display info about VA 0x1000 for ASID 1 you need to do:
echo "1 0x1000" > /sys/kernel/debug/habanalabs/hl0/mmu
What: /sys/kernel/debug/habanalabs/hl<n>/mmu_error
Date: Mar 2021
KernelVersion: 5.12
Contact: fkassabri@habana.ai
Description: Check and display page fault or access violation mmu errors for
all MMUs specified in mmu_cap_mask.
e.g. to display error info for MMU hw cap bit 9, you need to do:
echo "0x200" > /sys/kernel/debug/habanalabs/hl0/mmu_error
cat /sys/kernel/debug/habanalabs/hl0/mmu_error
What: /sys/kernel/debug/habanalabs/hl<n>/monitor_dump
Date: Mar 2022
KernelVersion: 5.19
Contact: osharabi@habana.ai
Description: Allows the root user to dump monitors status from the device's
protected config space.
This property is a binary blob that contains the result of the
monitors registers dump.
This custom interface is needed (instead of using the generic
Linux user-space PCI mapping) because this space is protected
and cannot be accessed using PCI read.
This interface doesn't support concurrency in the same device.
Only supported on GAUDI.
What: /sys/kernel/debug/habanalabs/hl<n>/monitor_dump_trig
Date: Mar 2022
KernelVersion: 5.19
Contact: osharabi@habana.ai
Description: Triggers dump of monitor data. The value to trigger the operation
must be 1. Triggering the monitor dump operation initiates dump of
current registers values of all monitors.
When the write is finished, the user can read the "monitor_dump"
blob
What: /sys/kernel/debug/habanalabs/hl<n>/set_power_state
Date: Jan 2019
KernelVersion: 5.1
Contact: ogabbay@kernel.org
Description: Sets the PCI power state. Valid values are "1" for D0 and "2"
for D3Hot
What: /sys/kernel/debug/habanalabs/hl<n>/skip_reset_on_timeout
Date: Jun 2021
KernelVersion: 5.13
Contact: ynudelman@habana.ai
Description: Sets the skip reset on timeout option for the device. Value of
"0" means device will be reset in case some CS has timed out,
otherwise it will not be reset.
What: /sys/kernel/debug/habanalabs/hl<n>/state_dump
Date: Oct 2021
KernelVersion: 5.15
Contact: ynudelman@habana.ai
Description: Gets the state dump occurring on a CS timeout or failure.
State dump is used for debug and is created each time in case of
a problem in a CS execution, before reset.
Reading from the node returns the newest state dump available.
Writing an integer X discards X state dumps, so that the
next read would return X+1-st newest state dump.
What: /sys/kernel/debug/habanalabs/hl<n>/stop_on_err
Date: Mar 2020
KernelVersion: 5.6
Contact: ogabbay@kernel.org
Description: Sets the stop-on_error option for the device engines. Value of
"0" is for disable, otherwise enable.
Relevant only for GOYA and GAUDI.
What: /sys/kernel/debug/habanalabs/hl<n>/timeout_locked
Date: Sep 2021
KernelVersion: 5.16
Contact: obitton@habana.ai
Description: Sets the command submission timeout value in seconds.
What: /sys/kernel/debug/habanalabs/hl<n>/userptr
Date: Jan 2019
KernelVersion: 5.1
Contact: ogabbay@kernel.org
Description: Displays a list with information about the currently user
pointers (user virtual addresses) that are pinned and mapped
to DMA addresses
What: /sys/kernel/debug/habanalabs/hl<n>/userptr_lookup
Date: Oct 2021
KernelVersion: 5.15
Contact: ogabbay@kernel.org
Description: Allows to search for specific user pointers (user virtual
addresses) that are pinned and mapped to DMA addresses, and see
their resolution to the specific dma address.
What: /sys/kernel/debug/habanalabs/hl<n>/vm
Date: Jan 2019
KernelVersion: 5.1
Contact: ogabbay@kernel.org
Description: Displays a list with information about all the active virtual
address mappings per ASID and all user mappings of HW blocks