| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * linux/fs/binfmt_elf.c | |
| * | |
| * These are the functions used to load ELF format executables as used | |
| * on SVr4 machines. Information on the format may be found in the book | |
| * "UNIX SYSTEM V RELEASE 4 Programmers Guide: Ansi C and Programming Support | |
| * Tools". | |
| * | |
| * Copyright 1993, 1994: Eric Youngdale (ericy@cais.com). | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/fs.h> | |
| #include <linux/log2.h> | |
| #include <linux/mm.h> | |
| #include <linux/mman.h> | |
| #include <linux/errno.h> | |
| #include <linux/signal.h> | |
| #include <linux/binfmts.h> | |
| #include <linux/string.h> | |
| #include <linux/file.h> | |
| #include <linux/slab.h> | |
| #include <linux/personality.h> | |
| #include <linux/elfcore.h> | |
| #include <linux/init.h> | |
| #include <linux/highuid.h> | |
| #include <linux/compiler.h> | |
| #include <linux/highmem.h> | |
| #include <linux/hugetlb.h> | |
| #include <linux/pagemap.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/security.h> | |
| #include <linux/random.h> | |
| #include <linux/elf.h> | |
| #include <linux/elf-randomize.h> | |
| #include <linux/utsname.h> | |
| #include <linux/coredump.h> | |
| #include <linux/sched.h> | |
| #include <linux/sched/coredump.h> | |
| #include <linux/sched/task_stack.h> | |
| #include <linux/sched/cputime.h> | |
| #include <linux/sizes.h> | |
| #include <linux/types.h> | |
| #include <linux/cred.h> | |
| #include <linux/dax.h> | |
| #include <linux/uaccess.h> | |
| #include <uapi/linux/rseq.h> | |
| #include <linux/rseq.h> | |
| #include <asm/param.h> | |
| #include <asm/page.h> | |
| #ifndef ELF_COMPAT | |
| #define ELF_COMPAT 0 | |
| #endif | |
| #ifndef user_long_t | |
| #define user_long_t long | |
| #endif | |
| #ifndef user_siginfo_t | |
| #define user_siginfo_t siginfo_t | |
| #endif | |
| /* That's for binfmt_elf_fdpic to deal with */ | |
| #ifndef elf_check_fdpic | |
| #define elf_check_fdpic(ex) false | |
| #endif | |
| static int load_elf_binary(struct linux_binprm *bprm); | |
| /* | |
| * If we don't support core dumping, then supply a NULL so we | |
| * don't even try. | |
| */ | |
| #ifdef CONFIG_ELF_CORE | |
| static int elf_core_dump(struct coredump_params *cprm); | |
| #else | |
| #define elf_core_dump NULL | |
| #endif | |
| #if ELF_EXEC_PAGESIZE > PAGE_SIZE | |
| #define ELF_MIN_ALIGN ELF_EXEC_PAGESIZE | |
| #else | |
| #define ELF_MIN_ALIGN PAGE_SIZE | |
| #endif | |
| #ifndef ELF_CORE_EFLAGS | |
| #define ELF_CORE_EFLAGS 0 | |
| #endif | |
| #define ELF_PAGESTART(_v) ((_v) & ~(int)(ELF_MIN_ALIGN-1)) | |
| #define ELF_PAGEOFFSET(_v) ((_v) & (ELF_MIN_ALIGN-1)) | |
| #define ELF_PAGEALIGN(_v) (((_v) + ELF_MIN_ALIGN - 1) & ~(ELF_MIN_ALIGN - 1)) | |
| static struct linux_binfmt elf_format = { | |
| .module = THIS_MODULE, | |
| .load_binary = load_elf_binary, | |
| #ifdef CONFIG_COREDUMP | |
| .core_dump = elf_core_dump, | |
| .min_coredump = ELF_EXEC_PAGESIZE, | |
| #endif | |
| }; | |
| #define BAD_ADDR(x) (unlikely((unsigned long)(x) >= TASK_SIZE)) | |
| static inline void elf_coredump_set_mm_eflags(struct mm_struct *mm, u32 flags) | |
| { | |
| #ifdef CONFIG_ARCH_HAS_ELF_CORE_EFLAGS | |
| mm->saved_e_flags = flags; | |
| #endif | |
| } | |
| static inline u32 elf_coredump_get_mm_eflags(struct mm_struct *mm, u32 flags) | |
| { | |
| #ifdef CONFIG_ARCH_HAS_ELF_CORE_EFLAGS | |
| flags = mm->saved_e_flags; | |
| #endif | |
| return flags; | |
| } | |
| /* | |
| * We need to explicitly zero any trailing portion of the page that follows | |
| * p_filesz when it ends before the page ends (e.g. bss), otherwise this | |
| * memory will contain the junk from the file that should not be present. | |
| */ | |
| static int padzero(unsigned long address) | |
| { | |
| unsigned long nbyte; | |
| nbyte = ELF_PAGEOFFSET(address); | |
| if (nbyte) { | |
| nbyte = ELF_MIN_ALIGN - nbyte; | |
| if (clear_user((void __user *)address, nbyte)) | |
| return -EFAULT; | |
| } | |
| return 0; | |
| } | |
| /* Let's use some macros to make this stack manipulation a little clearer */ | |
| #ifdef CONFIG_STACK_GROWSUP | |
| #define STACK_ADD(sp, items) ((elf_addr_t __user *)(sp) + (items)) | |
| #define STACK_ROUND(sp, items) \ | |
| ((15 + (unsigned long) ((sp) + (items))) &~ 15UL) | |
| #define STACK_ALLOC(sp, len) ({ \ | |
| elf_addr_t __user *old_sp = (elf_addr_t __user *)sp; sp += len; \ | |
| old_sp; }) | |
| #else | |
| #define STACK_ADD(sp, items) ((elf_addr_t __user *)(sp) - (items)) | |
| #define STACK_ROUND(sp, items) \ | |
| (((unsigned long) (sp - items)) &~ 15UL) | |
| #define STACK_ALLOC(sp, len) (sp -= len) | |
| #endif | |
| #ifndef ELF_BASE_PLATFORM | |
| /* | |
| * AT_BASE_PLATFORM indicates the "real" hardware/microarchitecture. | |
| * If the arch defines ELF_BASE_PLATFORM (in asm/elf.h), the value | |
| * will be copied to the user stack in the same manner as AT_PLATFORM. | |
| */ | |
| #define ELF_BASE_PLATFORM NULL | |
| #endif | |
| static int | |
| create_elf_tables(struct linux_binprm *bprm, const struct elfhdr *exec, | |
| unsigned long interp_load_addr, | |
| unsigned long e_entry, unsigned long phdr_addr) | |
| { | |
| struct mm_struct *mm = current->mm; | |
| unsigned long p = bprm->p; | |
| int argc = bprm->argc; | |
| int envc = bprm->envc; | |
| elf_addr_t __user *sp; | |
| elf_addr_t __user *u_platform; | |
| elf_addr_t __user *u_base_platform; | |
| elf_addr_t __user *u_rand_bytes; | |
| const char *k_platform = ELF_PLATFORM; | |
| const char *k_base_platform = ELF_BASE_PLATFORM; | |
| unsigned char k_rand_bytes[16]; | |
| int items; | |
| elf_addr_t *elf_info; | |
| int ei_index; | |
| const struct cred *cred = current_cred(); | |
| struct vm_area_struct *vma; | |
| /* | |
| * In some cases (e.g. Hyper-Threading), we want to avoid L1 | |
| * evictions by the processes running on the same package. One | |
| * thing we can do is to shuffle the initial stack for them. | |
| */ | |
| p = arch_align_stack(p); | |
| /* | |
| * If this architecture has a platform capability string, copy it | |
| * to userspace. In some cases (Sparc), this info is impossible | |
| * for userspace to get any other way, in others (i386) it is | |
| * merely difficult. | |
| */ | |
| u_platform = NULL; | |
| if (k_platform) { | |
| size_t len = strlen(k_platform) + 1; | |
| u_platform = (elf_addr_t __user *)STACK_ALLOC(p, len); | |
| if (copy_to_user(u_platform, k_platform, len)) | |
| return -EFAULT; | |
| } | |
| /* | |
| * If this architecture has a "base" platform capability | |
| * string, copy it to userspace. | |
| */ | |
| u_base_platform = NULL; | |
| if (k_base_platform) { | |
| size_t len = strlen(k_base_platform) + 1; | |
| u_base_platform = (elf_addr_t __user *)STACK_ALLOC(p, len); | |
| if (copy_to_user(u_base_platform, k_base_platform, len)) | |
| return -EFAULT; | |
| } | |
| /* | |
| * Generate 16 random bytes for userspace PRNG seeding. | |
| */ | |
| get_random_bytes(k_rand_bytes, sizeof(k_rand_bytes)); | |
| u_rand_bytes = (elf_addr_t __user *) | |
| STACK_ALLOC(p, sizeof(k_rand_bytes)); | |
| if (copy_to_user(u_rand_bytes, k_rand_bytes, sizeof(k_rand_bytes))) | |
| return -EFAULT; | |
| /* Create the ELF interpreter info */ | |
| elf_info = (elf_addr_t *)mm->saved_auxv; | |
| /* update AT_VECTOR_SIZE_BASE if the number of NEW_AUX_ENT() changes */ | |
| #define NEW_AUX_ENT(id, val) \ | |
| do { \ | |
| *elf_info++ = id; \ | |
| *elf_info++ = val; \ | |
| } while (0) | |
| #ifdef ARCH_DLINFO | |
| /* | |
| * ARCH_DLINFO must come first so PPC can do its special alignment of | |
| * AUXV. | |
| * update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT() in | |
| * ARCH_DLINFO changes | |
| */ | |
| ARCH_DLINFO; | |
| #endif | |
| NEW_AUX_ENT(AT_HWCAP, ELF_HWCAP); | |
| NEW_AUX_ENT(AT_PAGESZ, ELF_EXEC_PAGESIZE); | |
| NEW_AUX_ENT(AT_CLKTCK, CLOCKS_PER_SEC); | |
| NEW_AUX_ENT(AT_PHDR, phdr_addr); | |
| NEW_AUX_ENT(AT_PHENT, sizeof(struct elf_phdr)); | |
| NEW_AUX_ENT(AT_PHNUM, exec->e_phnum); | |
| NEW_AUX_ENT(AT_BASE, interp_load_addr); | |
| NEW_AUX_ENT(AT_FLAGS, bprm_at_flags(bprm)); | |
| NEW_AUX_ENT(AT_ENTRY, e_entry); | |
| NEW_AUX_ENT(AT_UID, from_kuid_munged(cred->user_ns, cred->uid)); | |
| NEW_AUX_ENT(AT_EUID, from_kuid_munged(cred->user_ns, cred->euid)); | |
| NEW_AUX_ENT(AT_GID, from_kgid_munged(cred->user_ns, cred->gid)); | |
| NEW_AUX_ENT(AT_EGID, from_kgid_munged(cred->user_ns, cred->egid)); | |
| NEW_AUX_ENT(AT_SECURE, bprm->secureexec); | |
| NEW_AUX_ENT(AT_RANDOM, (elf_addr_t)(unsigned long)u_rand_bytes); | |
| #ifdef ELF_HWCAP2 | |
| NEW_AUX_ENT(AT_HWCAP2, ELF_HWCAP2); | |
| #endif | |
| #ifdef ELF_HWCAP3 | |
| NEW_AUX_ENT(AT_HWCAP3, ELF_HWCAP3); | |
| #endif | |
| #ifdef ELF_HWCAP4 | |
| NEW_AUX_ENT(AT_HWCAP4, ELF_HWCAP4); | |
| #endif | |
| NEW_AUX_ENT(AT_EXECFN, bprm->exec); | |
| if (k_platform) { | |
| NEW_AUX_ENT(AT_PLATFORM, | |
| (elf_addr_t)(unsigned long)u_platform); | |
| } | |
| if (k_base_platform) { | |
| NEW_AUX_ENT(AT_BASE_PLATFORM, | |
| (elf_addr_t)(unsigned long)u_base_platform); | |
| } | |
| if (bprm->have_execfd) { | |
| NEW_AUX_ENT(AT_EXECFD, bprm->execfd); | |
| } | |
| #ifdef CONFIG_RSEQ | |
| NEW_AUX_ENT(AT_RSEQ_FEATURE_SIZE, offsetof(struct rseq, end)); | |
| NEW_AUX_ENT(AT_RSEQ_ALIGN, rseq_alloc_align()); | |
| #endif | |
| #undef NEW_AUX_ENT | |
| /* AT_NULL is zero; clear the rest too */ | |
| memset(elf_info, 0, (char *)mm->saved_auxv + | |
| sizeof(mm->saved_auxv) - (char *)elf_info); | |
| /* And advance past the AT_NULL entry. */ | |
| elf_info += 2; | |
| ei_index = elf_info - (elf_addr_t *)mm->saved_auxv; | |
| sp = STACK_ADD(p, ei_index); | |
| items = (argc + 1) + (envc + 1) + 1; | |
| bprm->p = STACK_ROUND(sp, items); | |
| /* Point sp at the lowest address on the stack */ | |
| #ifdef CONFIG_STACK_GROWSUP | |
| sp = (elf_addr_t __user *)bprm->p - items - ei_index; | |
| bprm->exec = (unsigned long)sp; /* XXX: PARISC HACK */ | |
| #else | |
| sp = (elf_addr_t __user *)bprm->p; | |
| #endif | |
| /* | |
| * Grow the stack manually; some architectures have a limit on how | |
| * far ahead a user-space access may be in order to grow the stack. | |
| */ | |
| if (mmap_write_lock_killable(mm)) | |
| return -EINTR; | |
| vma = find_extend_vma_locked(mm, bprm->p); | |
| mmap_write_unlock(mm); | |
| if (!vma) | |
| return -EFAULT; | |
| /* Now, let's put argc (and argv, envp if appropriate) on the stack */ | |
| if (put_user(argc, sp++)) | |
| return -EFAULT; | |
| /* Populate list of argv pointers back to argv strings. */ | |
| p = mm->arg_end = mm->arg_start; | |
| while (argc-- > 0) { | |
| size_t len; | |
| if (put_user((elf_addr_t)p, sp++)) | |
| return -EFAULT; | |
| len = strnlen_user((void __user *)p, MAX_ARG_STRLEN); | |
| if (!len || len > MAX_ARG_STRLEN) | |
| return -EINVAL; | |
| p += len; | |
| } | |
| if (put_user(0, sp++)) | |
| return -EFAULT; | |
| mm->arg_end = p; | |
| /* Populate list of envp pointers back to envp strings. */ | |
| mm->env_end = mm->env_start = p; | |
| while (envc-- > 0) { | |
| size_t len; | |
| if (put_user((elf_addr_t)p, sp++)) | |
| return -EFAULT; | |
| len = strnlen_user((void __user *)p, MAX_ARG_STRLEN); | |
| if (!len || len > MAX_ARG_STRLEN) | |
| return -EINVAL; | |
| p += len; | |
| } | |
| if (put_user(0, sp++)) | |
| return -EFAULT; | |
| mm->env_end = p; | |
| /* Put the elf_info on the stack in the right place. */ | |
| if (copy_to_user(sp, mm->saved_auxv, ei_index * sizeof(elf_addr_t))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| /* | |
| * Map "eppnt->p_filesz" bytes from "filep" offset "eppnt->p_offset" | |
| * into memory at "addr". (Note that p_filesz is rounded up to the | |
| * next page, so any extra bytes from the file must be wiped.) | |
| */ | |
| static unsigned long elf_map(struct file *filep, unsigned long addr, | |
| const struct elf_phdr *eppnt, int prot, int type, | |
| unsigned long total_size) | |
| { | |
| unsigned long map_addr; | |
| unsigned long size = eppnt->p_filesz + ELF_PAGEOFFSET(eppnt->p_vaddr); | |
| unsigned long off = eppnt->p_offset - ELF_PAGEOFFSET(eppnt->p_vaddr); | |
| addr = ELF_PAGESTART(addr); | |
| size = ELF_PAGEALIGN(size); | |
| /* mmap() will return -EINVAL if given a zero size, but a | |
| * segment with zero filesize is perfectly valid */ | |
| if (!size) | |
| return addr; | |
| /* | |
| * total_size is the size of the ELF (interpreter) image. | |
| * The _first_ mmap needs to know the full size, otherwise | |
| * randomization might put this image into an overlapping | |
| * position with the ELF binary image. (since size < total_size) | |
| * So we first map the 'big' image - and unmap the remainder at | |
| * the end. (which unmap is needed for ELF images with holes.) | |
| */ | |
| if (total_size) { | |
| total_size = ELF_PAGEALIGN(total_size); | |
| map_addr = vm_mmap(filep, addr, total_size, prot, type, off); | |
| if (!BAD_ADDR(map_addr)) | |
| vm_munmap(map_addr+size, total_size-size); | |
| } else | |
| map_addr = vm_mmap(filep, addr, size, prot, type, off); | |
| if ((type & MAP_FIXED_NOREPLACE) && | |
| PTR_ERR((void *)map_addr) == -EEXIST) | |
| pr_info("%d (%s): Uhuuh, elf segment at %px requested but the memory is mapped already\n", | |
| task_pid_nr(current), current->comm, (void *)addr); | |
| return(map_addr); | |
| } | |
| /* | |
| * Map "eppnt->p_filesz" bytes from "filep" offset "eppnt->p_offset" | |
| * into memory at "addr". Memory from "p_filesz" through "p_memsz" | |
| * rounded up to the next page is zeroed. | |
| */ | |
| static unsigned long elf_load(struct file *filep, unsigned long addr, | |
| const struct elf_phdr *eppnt, int prot, int type, | |
| unsigned long total_size) | |
| { | |
| unsigned long zero_start, zero_end; | |
| unsigned long map_addr; | |
| if (eppnt->p_filesz) { | |
| map_addr = elf_map(filep, addr, eppnt, prot, type, total_size); | |
| if (BAD_ADDR(map_addr)) | |
| return map_addr; | |
| if (eppnt->p_memsz > eppnt->p_filesz) { | |
| zero_start = map_addr + ELF_PAGEOFFSET(eppnt->p_vaddr) + | |
| eppnt->p_filesz; | |
| zero_end = map_addr + ELF_PAGEOFFSET(eppnt->p_vaddr) + | |
| eppnt->p_memsz; | |
| /* | |
| * Zero the end of the last mapped page but ignore | |
| * any errors if the segment isn't writable. | |
| */ | |
| if (padzero(zero_start) && (prot & PROT_WRITE)) | |
| return -EFAULT; | |
| } | |
| } else { | |
| map_addr = zero_start = ELF_PAGESTART(addr); | |
| zero_end = zero_start + ELF_PAGEOFFSET(eppnt->p_vaddr) + | |
| eppnt->p_memsz; | |
| } | |
| if (eppnt->p_memsz > eppnt->p_filesz) { | |
| /* | |
| * Map the last of the segment. | |
| * If the header is requesting these pages to be | |
| * executable, honour that (ppc32 needs this). | |
| */ | |
| int error; | |
| zero_start = ELF_PAGEALIGN(zero_start); | |
| zero_end = ELF_PAGEALIGN(zero_end); | |
| error = vm_brk_flags(zero_start, zero_end - zero_start, | |
| prot & PROT_EXEC); | |
| if (error) | |
| map_addr = error; | |
| } | |
| return map_addr; | |
| } | |
| static unsigned long total_mapping_size(const struct elf_phdr *phdr, int nr) | |
| { | |
| elf_addr_t min_addr = -1; | |
| elf_addr_t max_addr = 0; | |
| bool pt_load = false; | |
| int i; | |
| for (i = 0; i < nr; i++) { | |
| if (phdr[i].p_type == PT_LOAD) { | |
| min_addr = min(min_addr, ELF_PAGESTART(phdr[i].p_vaddr)); | |
| max_addr = max(max_addr, phdr[i].p_vaddr + phdr[i].p_memsz); | |
| pt_load = true; | |
| } | |
| } | |
| return pt_load ? (max_addr - min_addr) : 0; | |
| } | |
| static int elf_read(struct file *file, void *buf, size_t len, loff_t pos) | |
| { | |
| ssize_t rv; | |
| rv = kernel_read(file, buf, len, &pos); | |
| if (unlikely(rv != len)) { | |
| return (rv < 0) ? rv : -EIO; | |
| } | |
| return 0; | |
| } | |
| static unsigned long maximum_alignment(struct elf_phdr *cmds, int nr) | |
| { | |
| unsigned long alignment = 0; | |
| int i; | |
| for (i = 0; i < nr; i++) { | |
| if (cmds[i].p_type == PT_LOAD) { | |
| unsigned long p_align = cmds[i].p_align; | |
| /* skip non-power of two alignments as invalid */ | |
| if (!is_power_of_2(p_align)) | |
| continue; | |
| alignment = max(alignment, p_align); | |
| } | |
| } | |
| /* ensure we align to at least one page */ | |
| return ELF_PAGEALIGN(alignment); | |
| } | |
| /** | |
| * load_elf_phdrs() - load ELF program headers | |
| * @elf_ex: ELF header of the binary whose program headers should be loaded | |
| * @elf_file: the opened ELF binary file | |
| * | |
| * Loads ELF program headers from the binary file elf_file, which has the ELF | |
| * header pointed to by elf_ex, into a newly allocated array. The caller is | |
| * responsible for freeing the allocated data. Returns NULL upon failure. | |
| */ | |
| static struct elf_phdr *load_elf_phdrs(const struct elfhdr *elf_ex, | |
| struct file *elf_file) | |
| { | |
| struct elf_phdr *elf_phdata = NULL; | |
| int retval = -1; | |
| unsigned int size; | |
| /* | |
| * If the size of this structure has changed, then punt, since | |
| * we will be doing the wrong thing. | |
| */ | |
| if (elf_ex->e_phentsize != sizeof(struct elf_phdr)) | |
| goto out; | |
| /* Sanity check the number of program headers... */ | |
| /* ...and their total size. */ | |
| size = sizeof(struct elf_phdr) * elf_ex->e_phnum; | |
| if (size == 0 || size > 65536) | |
| goto out; | |
| elf_phdata = kmalloc(size, GFP_KERNEL); | |
| if (!elf_phdata) | |
| goto out; | |
| /* Read in the program headers */ | |
| retval = elf_read(elf_file, elf_phdata, size, elf_ex->e_phoff); | |
| out: | |
| if (retval) { | |
| kfree(elf_phdata); | |
| elf_phdata = NULL; | |
| } | |
| return elf_phdata; | |
| } | |
| #ifndef CONFIG_ARCH_BINFMT_ELF_STATE | |
| /** | |
| * struct arch_elf_state - arch-specific ELF loading state | |
| * | |
| * This structure is used to preserve architecture specific data during | |
| * the loading of an ELF file, throughout the checking of architecture | |
| * specific ELF headers & through to the point where the ELF load is | |
| * known to be proceeding (ie. SET_PERSONALITY). | |
| * | |
| * This implementation is a dummy for architectures which require no | |
| * specific state. | |
| */ | |
| struct arch_elf_state { | |
| }; | |
| #define INIT_ARCH_ELF_STATE {} | |
| /** | |
| * arch_elf_pt_proc() - check a PT_LOPROC..PT_HIPROC ELF program header | |
| * @ehdr: The main ELF header | |
| * @phdr: The program header to check | |
| * @elf: The open ELF file | |
| * @is_interp: True if the phdr is from the interpreter of the ELF being | |
| * loaded, else false. | |
| * @state: Architecture-specific state preserved throughout the process | |
| * of loading the ELF. | |
| * | |
| * Inspects the program header phdr to validate its correctness and/or | |
| * suitability for the system. Called once per ELF program header in the | |
| * range PT_LOPROC to PT_HIPROC, for both the ELF being loaded and its | |
| * interpreter. | |
| * | |
| * Return: Zero to proceed with the ELF load, non-zero to fail the ELF load | |
| * with that return code. | |
| */ | |
| static inline int arch_elf_pt_proc(struct elfhdr *ehdr, | |
| struct elf_phdr *phdr, | |
| struct file *elf, bool is_interp, | |
| struct arch_elf_state *state) | |
| { | |
| /* Dummy implementation, always proceed */ | |
| return 0; | |
| } | |
| /** | |
| * arch_check_elf() - check an ELF executable | |
| * @ehdr: The main ELF header | |
| * @has_interp: True if the ELF has an interpreter, else false. | |
| * @interp_ehdr: The interpreter's ELF header | |
| * @state: Architecture-specific state preserved throughout the process | |
| * of loading the ELF. | |
| * | |
| * Provides a final opportunity for architecture code to reject the loading | |
| * of the ELF & cause an exec syscall to return an error. This is called after | |
| * all program headers to be checked by arch_elf_pt_proc have been. | |
| * | |
| * Return: Zero to proceed with the ELF load, non-zero to fail the ELF load | |
| * with that return code. | |
| */ | |
| static inline int arch_check_elf(struct elfhdr *ehdr, bool has_interp, | |
| struct elfhdr *interp_ehdr, | |
| struct arch_elf_state *state) | |
| { | |
| /* Dummy implementation, always proceed */ | |
| return 0; | |
| } | |
| #endif /* !CONFIG_ARCH_BINFMT_ELF_STATE */ | |
| static inline int make_prot(u32 p_flags, struct arch_elf_state *arch_state, | |
| bool has_interp, bool is_interp) | |
| { | |
| int prot = 0; | |
| if (p_flags & PF_R) | |
| prot |= PROT_READ; | |
| if (p_flags & PF_W) | |
| prot |= PROT_WRITE; | |
| if (p_flags & PF_X) | |
| prot |= PROT_EXEC; | |
| return arch_elf_adjust_prot(prot, arch_state, has_interp, is_interp); | |
| } | |
| /* This is much more generalized than the library routine read function, | |
| so we keep this separate. Technically the library read function | |
| is only provided so that we can read a.out libraries that have | |
| an ELF header */ | |
| static unsigned long load_elf_interp(struct elfhdr *interp_elf_ex, | |
| struct file *interpreter, | |
| unsigned long no_base, struct elf_phdr *interp_elf_phdata, | |
| struct arch_elf_state *arch_state) | |
| { | |
| struct elf_phdr *eppnt; | |
| unsigned long load_addr = 0; | |
| int load_addr_set = 0; | |
| unsigned long error = ~0UL; | |
| unsigned long total_size; | |
| int i; | |
| /* First of all, some simple consistency checks */ | |
| if (interp_elf_ex->e_type != ET_EXEC && | |
| interp_elf_ex->e_type != ET_DYN) | |
| goto out; | |
| if (!elf_check_arch(interp_elf_ex) || | |
| elf_check_fdpic(interp_elf_ex)) | |
| goto out; | |
| if (!can_mmap_file(interpreter)) | |
| goto out; | |
| total_size = total_mapping_size(interp_elf_phdata, | |
| interp_elf_ex->e_phnum); | |
| if (!total_size) { | |
| error = -EINVAL; | |
| goto out; | |
| } | |
| eppnt = interp_elf_phdata; | |
| for (i = 0; i < interp_elf_ex->e_phnum; i++, eppnt++) { | |
| if (eppnt->p_type == PT_LOAD) { | |
| int elf_type = MAP_PRIVATE; | |
| int elf_prot = make_prot(eppnt->p_flags, arch_state, | |
| true, true); | |
| unsigned long vaddr = 0; | |
| unsigned long k, map_addr; | |
| vaddr = eppnt->p_vaddr; | |
| if (interp_elf_ex->e_type == ET_EXEC || load_addr_set) | |
| elf_type |= MAP_FIXED; | |
| else if (no_base && interp_elf_ex->e_type == ET_DYN) | |
| load_addr = -vaddr; | |
| map_addr = elf_load(interpreter, load_addr + vaddr, | |
| eppnt, elf_prot, elf_type, total_size); | |
| total_size = 0; | |
| error = map_addr; | |
| if (BAD_ADDR(map_addr)) | |
| goto out; | |
| if (!load_addr_set && | |
| interp_elf_ex->e_type == ET_DYN) { | |
| load_addr = map_addr - ELF_PAGESTART(vaddr); | |
| load_addr_set = 1; | |
| } | |
| /* | |
| * Check to see if the section's size will overflow the | |
| * allowed task size. Note that p_filesz must always be | |
| * <= p_memsize so it's only necessary to check p_memsz. | |
| */ | |
| k = load_addr + eppnt->p_vaddr; | |
| if (BAD_ADDR(k) || | |
| eppnt->p_filesz > eppnt->p_memsz || | |
| eppnt->p_memsz > TASK_SIZE || | |
| TASK_SIZE - eppnt->p_memsz < k) { | |
| error = -ENOMEM; | |
| goto out; | |
| } | |
| } | |
| } | |
| error = load_addr; | |
| out: | |
| return error; | |
| } | |
| /* | |
| * These are the functions used to load ELF style executables and shared | |
| * libraries. There is no binary dependent code anywhere else. | |
| */ | |
| static int parse_elf_property(const char *data, size_t *off, size_t datasz, | |
| struct arch_elf_state *arch, | |
| bool have_prev_type, u32 *prev_type) | |
| { | |
| size_t o, step; | |
| const struct gnu_property *pr; | |
| int ret; | |
| if (*off == datasz) | |
| return -ENOENT; | |
| if (WARN_ON_ONCE(*off > datasz || *off % ELF_GNU_PROPERTY_ALIGN)) | |
| return -EIO; | |
| o = *off; | |
| datasz -= *off; | |
| if (datasz < sizeof(*pr)) | |
| return -ENOEXEC; | |
| pr = (const struct gnu_property *)(data + o); | |
| o += sizeof(*pr); | |
| datasz -= sizeof(*pr); | |
| if (pr->pr_datasz > datasz) | |
| return -ENOEXEC; | |
| WARN_ON_ONCE(o % ELF_GNU_PROPERTY_ALIGN); | |
| step = round_up(pr->pr_datasz, ELF_GNU_PROPERTY_ALIGN); | |
| if (step > datasz) | |
| return -ENOEXEC; | |
| /* Properties are supposed to be unique and sorted on pr_type: */ | |
| if (have_prev_type && pr->pr_type <= *prev_type) | |
| return -ENOEXEC; | |
| *prev_type = pr->pr_type; | |
| ret = arch_parse_elf_property(pr->pr_type, data + o, | |
| pr->pr_datasz, ELF_COMPAT, arch); | |
| if (ret) | |
| return ret; | |
| *off = o + step; | |
| return 0; | |
| } | |
| #define NOTE_DATA_SZ SZ_1K | |
| #define NOTE_NAME_SZ (sizeof(NN_GNU_PROPERTY_TYPE_0)) | |
| static int parse_elf_properties(struct file *f, const struct elf_phdr *phdr, | |
| struct arch_elf_state *arch) | |
| { | |
| union { | |
| struct elf_note nhdr; | |
| char data[NOTE_DATA_SZ]; | |
| } note; | |
| loff_t pos; | |
| ssize_t n; | |
| size_t off, datasz; | |
| int ret; | |
| bool have_prev_type; | |
| u32 prev_type; | |
| if (!IS_ENABLED(CONFIG_ARCH_USE_GNU_PROPERTY) || !phdr) | |
| return 0; | |
| /* load_elf_binary() shouldn't call us unless this is true... */ | |
| if (WARN_ON_ONCE(phdr->p_type != PT_GNU_PROPERTY)) | |
| return -ENOEXEC; | |
| /* If the properties are crazy large, that's too bad (for now): */ | |
| if (phdr->p_filesz > sizeof(note)) | |
| return -ENOEXEC; | |
| pos = phdr->p_offset; | |
| n = kernel_read(f, ¬e, phdr->p_filesz, &pos); | |
| BUILD_BUG_ON(sizeof(note) < sizeof(note.nhdr) + NOTE_NAME_SZ); | |
| if (n < 0 || n < sizeof(note.nhdr) + NOTE_NAME_SZ) | |
| return -EIO; | |
| if (note.nhdr.n_type != NT_GNU_PROPERTY_TYPE_0 || | |
| note.nhdr.n_namesz != NOTE_NAME_SZ || | |
| strncmp(note.data + sizeof(note.nhdr), | |
| NN_GNU_PROPERTY_TYPE_0, n - sizeof(note.nhdr))) | |
| return -ENOEXEC; | |
| off = round_up(sizeof(note.nhdr) + NOTE_NAME_SZ, | |
| ELF_GNU_PROPERTY_ALIGN); | |
| if (off > n) | |
| return -ENOEXEC; | |
| if (note.nhdr.n_descsz > n - off) | |
| return -ENOEXEC; | |
| datasz = off + note.nhdr.n_descsz; | |
| have_prev_type = false; | |
| do { | |
| ret = parse_elf_property(note.data, &off, datasz, arch, | |
| have_prev_type, &prev_type); | |
| have_prev_type = true; | |
| } while (!ret); | |
| return ret == -ENOENT ? 0 : ret; | |
| } | |
| static int load_elf_binary(struct linux_binprm *bprm) | |
| { | |
| struct file *interpreter = NULL; /* to shut gcc up */ | |
| unsigned long load_bias = 0, phdr_addr = 0; | |
| int first_pt_load = 1; | |
| unsigned long error; | |
| struct elf_phdr *elf_ppnt, *elf_phdata, *interp_elf_phdata = NULL; | |
| struct elf_phdr *elf_property_phdata = NULL; | |
| unsigned long elf_brk; | |
| bool brk_moved = false; | |
| int retval, i; | |
| unsigned long elf_entry; | |
| unsigned long e_entry; | |
| unsigned long interp_load_addr = 0; | |
| unsigned long start_code, end_code, start_data, end_data; | |
| unsigned long reloc_func_desc __maybe_unused = 0; | |
| int executable_stack = EXSTACK_DEFAULT; | |
| struct elfhdr *elf_ex = (struct elfhdr *)bprm->buf; | |
| struct elfhdr *interp_elf_ex = NULL; | |
| struct arch_elf_state arch_state = INIT_ARCH_ELF_STATE; | |
| struct mm_struct *mm; | |
| struct pt_regs *regs; | |
| retval = -ENOEXEC; | |
| /* First of all, some simple consistency checks */ | |
| if (memcmp(elf_ex->e_ident, ELFMAG, SELFMAG) != 0) | |
| goto out; | |
| if (elf_ex->e_type != ET_EXEC && elf_ex->e_type != ET_DYN) | |
| goto out; | |
| if (!elf_check_arch(elf_ex)) | |
| goto out; | |
| if (elf_check_fdpic(elf_ex)) | |
| goto out; | |
| if (!can_mmap_file(bprm->file)) | |
| goto out; | |
| elf_phdata = load_elf_phdrs(elf_ex, bprm->file); | |
| if (!elf_phdata) | |
| goto out; | |
| elf_ppnt = elf_phdata; | |
| for (i = 0; i < elf_ex->e_phnum; i++, elf_ppnt++) { | |
| char *elf_interpreter; | |
| if (elf_ppnt->p_type == PT_GNU_PROPERTY) { | |
| elf_property_phdata = elf_ppnt; | |
| continue; | |
| } | |
| if (elf_ppnt->p_type != PT_INTERP) | |
| continue; | |
| /* | |
| * This is the program interpreter used for shared libraries - | |
| * for now assume that this is an a.out format binary. | |
| */ | |
| retval = -ENOEXEC; | |
| if (elf_ppnt->p_filesz > PATH_MAX || elf_ppnt->p_filesz < 2) | |
| goto out_free_ph; | |
| retval = -ENOMEM; | |
| elf_interpreter = kmalloc(elf_ppnt->p_filesz, GFP_KERNEL); | |
| if (!elf_interpreter) | |
| goto out_free_ph; | |
| retval = elf_read(bprm->file, elf_interpreter, elf_ppnt->p_filesz, | |
| elf_ppnt->p_offset); | |
| if (retval < 0) | |
| goto out_free_interp; | |
| /* make sure path is NULL terminated */ | |
| retval = -ENOEXEC; | |
| if (elf_interpreter[elf_ppnt->p_filesz - 1] != '\0') | |
| goto out_free_interp; | |
| interpreter = bprm_open_interpreter(bprm, elf_interpreter); | |
| kfree(elf_interpreter); | |
| retval = PTR_ERR(interpreter); | |
| if (IS_ERR(interpreter)) | |
| goto out_free_ph; | |
| /* | |
| * If the binary is not readable then enforce mm->dumpable = 0 | |
| * regardless of the interpreter's permissions. | |
| */ | |
| would_dump(bprm, interpreter); | |
| interp_elf_ex = kmalloc_obj(*interp_elf_ex); | |
| if (!interp_elf_ex) { | |
| retval = -ENOMEM; | |
| goto out_free_file; | |
| } | |
| /* Get the exec headers */ | |
| retval = elf_read(interpreter, interp_elf_ex, | |
| sizeof(*interp_elf_ex), 0); | |
| if (retval < 0) | |
| goto out_free_dentry; | |
| break; | |
| out_free_interp: | |
| kfree(elf_interpreter); | |
| goto out_free_ph; | |
| } | |
| /* No PT_INTERP to substitute for: the override does not apply. */ | |
| bprm_drop_loader(bprm); | |
| elf_ppnt = elf_phdata; | |
| for (i = 0; i < elf_ex->e_phnum; i++, elf_ppnt++) | |
| switch (elf_ppnt->p_type) { | |
| case PT_GNU_STACK: | |
| if (elf_ppnt->p_flags & PF_X) | |
| executable_stack = EXSTACK_ENABLE_X; | |
| else | |
| executable_stack = EXSTACK_DISABLE_X; | |
| break; | |
| case PT_LOPROC ... PT_HIPROC: | |
| retval = arch_elf_pt_proc(elf_ex, elf_ppnt, | |
| bprm->file, false, | |
| &arch_state); | |
| if (retval) | |
| goto out_free_dentry; | |
| break; | |
| } | |
| /* Some simple consistency checks for the interpreter */ | |
| if (interpreter) { | |
| retval = -ELIBBAD; | |
| /* Not an ELF interpreter */ | |
| if (memcmp(interp_elf_ex->e_ident, ELFMAG, SELFMAG) != 0) | |
| goto out_free_dentry; | |
| /* Verify the interpreter has a valid arch */ | |
| if (!elf_check_arch(interp_elf_ex) || | |
| elf_check_fdpic(interp_elf_ex)) | |
| goto out_free_dentry; | |
| /* Load the interpreter program headers */ | |
| interp_elf_phdata = load_elf_phdrs(interp_elf_ex, | |
| interpreter); | |
| if (!interp_elf_phdata) | |
| goto out_free_dentry; | |
| /* Pass PT_LOPROC..PT_HIPROC headers to arch code */ | |
| elf_property_phdata = NULL; | |
| elf_ppnt = interp_elf_phdata; | |
| for (i = 0; i < interp_elf_ex->e_phnum; i++, elf_ppnt++) | |
| switch (elf_ppnt->p_type) { | |
| case PT_GNU_PROPERTY: | |
| elf_property_phdata = elf_ppnt; | |
| break; | |
| case PT_LOPROC ... PT_HIPROC: | |
| retval = arch_elf_pt_proc(interp_elf_ex, | |
| elf_ppnt, interpreter, | |
| true, &arch_state); | |
| if (retval) | |
| goto out_free_dentry; | |
| break; | |
| } | |
| } | |
| retval = parse_elf_properties(interpreter ?: bprm->file, | |
| elf_property_phdata, &arch_state); | |
| if (retval) | |
| goto out_free_dentry; | |
| /* | |
| * Allow arch code to reject the ELF at this point, whilst it's | |
| * still possible to return an error to the code that invoked | |
| * the exec syscall. | |
| */ | |
| retval = arch_check_elf(elf_ex, | |
| !!interpreter, interp_elf_ex, | |
| &arch_state); | |
| if (retval) | |
| goto out_free_dentry; | |
| /* Flush all traces of the currently running executable */ | |
| retval = begin_new_exec(bprm); | |
| if (retval) | |
| goto out_free_dentry; | |
| /* Do this immediately, since STACK_TOP as used in setup_arg_pages | |
| may depend on the personality. */ | |
| SET_PERSONALITY2(*elf_ex, &arch_state); | |
| if (elf_read_implies_exec(*elf_ex, executable_stack)) | |
| current->personality |= READ_IMPLIES_EXEC; | |
| const int snapshot_randomize_va_space = READ_ONCE(randomize_va_space); | |
| if (!(current->personality & ADDR_NO_RANDOMIZE) && snapshot_randomize_va_space) | |
| current->flags |= PF_RANDOMIZE; | |
| setup_new_exec(bprm); | |
| /* Do this so that we can load the interpreter, if need be. We will | |
| change some of these later */ | |
| retval = setup_arg_pages(bprm, randomize_stack_top(STACK_TOP), | |
| executable_stack); | |
| if (retval < 0) | |
| goto out_free_dentry; | |
| elf_brk = 0; | |
| start_code = ~0UL; | |
| end_code = 0; | |
| start_data = 0; | |
| end_data = 0; | |
| /* Now we do a little grungy work by mmapping the ELF image into | |
| the correct location in memory. */ | |
| for(i = 0, elf_ppnt = elf_phdata; | |
| i < elf_ex->e_phnum; i++, elf_ppnt++) { | |
| int elf_prot, elf_flags; | |
| unsigned long k, vaddr; | |
| unsigned long total_size = 0; | |
| unsigned long alignment; | |
| if (elf_ppnt->p_type != PT_LOAD) | |
| continue; | |
| elf_prot = make_prot(elf_ppnt->p_flags, &arch_state, | |
| !!interpreter, false); | |
| elf_flags = MAP_PRIVATE; | |
| vaddr = elf_ppnt->p_vaddr; | |
| /* | |
| * The first time through the loop, first_pt_load is true: | |
| * layout will be calculated. Once set, use MAP_FIXED since | |
| * we know we've already safely mapped the entire region with | |
| * MAP_FIXED_NOREPLACE in the once-per-binary logic following. | |
| */ | |
| if (!first_pt_load) { | |
| elf_flags |= MAP_FIXED; | |
| } else if (elf_ex->e_type == ET_EXEC) { | |
| /* | |
| * This logic is run once for the first LOAD Program | |
| * Header for ET_EXEC binaries. No special handling | |
| * is needed. | |
| */ | |
| elf_flags |= MAP_FIXED_NOREPLACE; | |
| } else if (elf_ex->e_type == ET_DYN) { | |
| /* | |
| * This logic is run once for the first LOAD Program | |
| * Header for ET_DYN binaries to calculate the | |
| * randomization (load_bias) for all the LOAD | |
| * Program Headers. | |
| */ | |
| /* | |
| * Calculate the entire size of the ELF mapping | |
| * (total_size), used for the initial mapping, | |
| * due to load_addr_set which is set to true later | |
| * once the initial mapping is performed. | |
| * | |
| * Note that this is only sensible when the LOAD | |
| * segments are contiguous (or overlapping). If | |
| * used for LOADs that are far apart, this would | |
| * cause the holes between LOADs to be mapped, | |
| * running the risk of having the mapping fail, | |
| * as it would be larger than the ELF file itself. | |
| * | |
| * As a result, only ET_DYN does this, since | |
| * some ET_EXEC (e.g. ia64) may have large virtual | |
| * memory holes between LOADs. | |
| * | |
| */ | |
| total_size = total_mapping_size(elf_phdata, | |
| elf_ex->e_phnum); | |
| if (!total_size) { | |
| retval = -EINVAL; | |
| goto out_free_dentry; | |
| } | |
| /* Calculate any requested alignment. */ | |
| alignment = maximum_alignment(elf_phdata, elf_ex->e_phnum); | |
| /** | |
| * DOC: PIE handling | |
| * | |
| * There are effectively two types of ET_DYN ELF | |
| * binaries: programs (i.e. PIE: ET_DYN with | |
| * PT_INTERP) and loaders (i.e. static PIE: ET_DYN | |
| * without PT_INTERP, usually the ELF interpreter | |
| * itself). Loaders must be loaded away from programs | |
| * since the program may otherwise collide with the | |
| * loader (especially for ET_EXEC which does not have | |
| * a randomized position). | |
| * | |
| * For example, to handle invocations of | |
| * "./ld.so someprog" to test out a new version of | |
| * the loader, the subsequent program that the | |
| * loader loads must avoid the loader itself, so | |
| * they cannot share the same load range. Sufficient | |
| * room for the brk must be allocated with the | |
| * loader as well, since brk must be available with | |
| * the loader. | |
| * | |
| * Therefore, programs are loaded offset from | |
| * ELF_ET_DYN_BASE and loaders are loaded into the | |
| * independently randomized mmap region (0 load_bias | |
| * without MAP_FIXED nor MAP_FIXED_NOREPLACE). | |
| * | |
| * See below for "brk" handling details, which is | |
| * also affected by program vs loader and ASLR. | |
| */ | |
| if (interpreter) { | |
| /* On ET_DYN with PT_INTERP, we do the ASLR. */ | |
| load_bias = ELF_ET_DYN_BASE; | |
| if (current->flags & PF_RANDOMIZE) | |
| load_bias += arch_mmap_rnd(); | |
| /* Adjust alignment as requested. */ | |
| if (alignment) | |
| load_bias &= ~(alignment - 1); | |
| elf_flags |= MAP_FIXED_NOREPLACE; | |
| } else { | |
| /* | |
| * For ET_DYN without PT_INTERP, we rely on | |
| * the architectures's (potentially ASLR) mmap | |
| * base address (via a load_bias of 0). | |
| * | |
| * When a large alignment is requested, we | |
| * must do the allocation at address "0" right | |
| * now to discover where things will load so | |
| * that we can adjust the resulting alignment. | |
| * In this case (load_bias != 0), we can use | |
| * MAP_FIXED_NOREPLACE to make sure the mapping | |
| * doesn't collide with anything. | |
| */ | |
| if (alignment > ELF_MIN_ALIGN) { | |
| load_bias = elf_load(bprm->file, 0, elf_ppnt, | |
| elf_prot, elf_flags, total_size); | |
| if (BAD_ADDR(load_bias)) { | |
| retval = IS_ERR_VALUE(load_bias) ? | |
| PTR_ERR((void*)load_bias) : -EINVAL; | |
| goto out_free_dentry; | |
| } | |
| vm_munmap(load_bias, total_size); | |
| /* Adjust alignment as requested. */ | |
| if (alignment) | |
| load_bias &= ~(alignment - 1); | |
| elf_flags |= MAP_FIXED_NOREPLACE; | |
| } else | |
| load_bias = 0; | |
| } | |
| /* | |
| * Since load_bias is used for all subsequent loading | |
| * calculations, we must lower it by the first vaddr | |
| * so that the remaining calculations based on the | |
| * ELF vaddrs will be correctly offset. The result | |
| * is then page aligned. | |
| */ | |
| load_bias = ELF_PAGESTART(load_bias - vaddr); | |
| } | |
| error = elf_load(bprm->file, load_bias + vaddr, elf_ppnt, | |
| elf_prot, elf_flags, total_size); | |
| if (BAD_ADDR(error)) { | |
| retval = IS_ERR_VALUE(error) ? | |
| PTR_ERR((void*)error) : -EINVAL; | |
| goto out_free_dentry; | |
| } | |
| if (first_pt_load) { | |
| first_pt_load = 0; | |
| if (elf_ex->e_type == ET_DYN) { | |
| load_bias += error - | |
| ELF_PAGESTART(load_bias + vaddr); | |
| reloc_func_desc = load_bias; | |
| } | |
| } | |
| /* | |
| * Figure out which segment in the file contains the Program | |
| * Header table, and map to the associated memory address. | |
| */ | |
| if (elf_ppnt->p_offset <= elf_ex->e_phoff && | |
| elf_ex->e_phoff < elf_ppnt->p_offset + elf_ppnt->p_filesz) { | |
| phdr_addr = elf_ex->e_phoff - elf_ppnt->p_offset + | |
| elf_ppnt->p_vaddr; | |
| } | |
| k = elf_ppnt->p_vaddr; | |
| if ((elf_ppnt->p_flags & PF_X) && k < start_code) | |
| start_code = k; | |
| if (start_data < k) | |
| start_data = k; | |
| /* | |
| * Check to see if the section's size will overflow the | |
| * allowed task size. Note that p_filesz must always be | |
| * <= p_memsz so it is only necessary to check p_memsz. | |
| */ | |
| if (BAD_ADDR(k) || elf_ppnt->p_filesz > elf_ppnt->p_memsz || | |
| elf_ppnt->p_memsz > TASK_SIZE || | |
| TASK_SIZE - elf_ppnt->p_memsz < k) { | |
| /* set_brk can never work. Avoid overflows. */ | |
| retval = -EINVAL; | |
| goto out_free_dentry; | |
| } | |
| k = elf_ppnt->p_vaddr + elf_ppnt->p_filesz; | |
| if ((elf_ppnt->p_flags & PF_X) && end_code < k) | |
| end_code = k; | |
| if (end_data < k) | |
| end_data = k; | |
| k = elf_ppnt->p_vaddr + elf_ppnt->p_memsz; | |
| if (k > elf_brk) | |
| elf_brk = k; | |
| } | |
| e_entry = elf_ex->e_entry + load_bias; | |
| phdr_addr += load_bias; | |
| elf_brk += load_bias; | |
| start_code += load_bias; | |
| end_code += load_bias; | |
| start_data += load_bias; | |
| end_data += load_bias; | |
| if (interpreter) { | |
| elf_entry = load_elf_interp(interp_elf_ex, | |
| interpreter, | |
| load_bias, interp_elf_phdata, | |
| &arch_state); | |
| if (!IS_ERR_VALUE(elf_entry)) { | |
| /* | |
| * load_elf_interp() returns relocation | |
| * adjustment | |
| */ | |
| interp_load_addr = elf_entry; | |
| elf_entry += interp_elf_ex->e_entry; | |
| } | |
| if (BAD_ADDR(elf_entry)) { | |
| retval = IS_ERR_VALUE(elf_entry) ? | |
| (int)elf_entry : -EINVAL; | |
| goto out_free_dentry; | |
| } | |
| reloc_func_desc = interp_load_addr; | |
| exe_file_allow_write_access(interpreter); | |
| fput(interpreter); | |
| kfree(interp_elf_ex); | |
| kfree(interp_elf_phdata); | |
| } else { | |
| elf_entry = e_entry; | |
| if (BAD_ADDR(elf_entry)) { | |
| retval = -EINVAL; | |
| goto out_free_dentry; | |
| } | |
| } | |
| kfree(elf_phdata); | |
| set_binfmt(&elf_format); | |
| #ifdef ARCH_HAS_SETUP_ADDITIONAL_PAGES | |
| retval = ARCH_SETUP_ADDITIONAL_PAGES(bprm, elf_ex, !!interpreter); | |
| if (retval < 0) | |
| goto out; | |
| #endif /* ARCH_HAS_SETUP_ADDITIONAL_PAGES */ | |
| retval = create_elf_tables(bprm, elf_ex, interp_load_addr, | |
| e_entry, phdr_addr); | |
| if (retval < 0) | |
| goto out; | |
| mm = current->mm; | |
| mm->end_code = end_code; | |
| mm->start_code = start_code; | |
| mm->start_data = start_data; | |
| mm->end_data = end_data; | |
| mm->start_stack = bprm->p; | |
| elf_coredump_set_mm_eflags(mm, elf_ex->e_flags); | |
| /** | |
| * DOC: "brk" handling | |
| * | |
| * For architectures with ELF randomization, when executing a | |
| * loader directly (i.e. static PIE: ET_DYN without PT_INTERP), | |
| * move the brk area out of the mmap region and into the unused | |
| * ELF_ET_DYN_BASE region. Since "brk" grows up it may collide | |
| * early with the stack growing down or other regions being put | |
| * into the mmap region by the kernel (e.g. vdso). | |
| * | |
| * In the CONFIG_COMPAT_BRK case, though, everything is turned | |
| * off because we're not allowed to move the brk at all. | |
| */ | |
| if (!IS_ENABLED(CONFIG_COMPAT_BRK) && | |
| IS_ENABLED(CONFIG_ARCH_HAS_ELF_RANDOMIZE) && | |
| elf_ex->e_type == ET_DYN && !interpreter) { | |
| elf_brk = ELF_ET_DYN_BASE; | |
| /* This counts as moving the brk, so let brk(2) know. */ | |
| brk_moved = true; | |
| } | |
| mm->start_brk = mm->brk = ELF_PAGEALIGN(elf_brk); | |
| if ((current->flags & PF_RANDOMIZE) && snapshot_randomize_va_space > 1) { | |
| /* | |
| * If we didn't move the brk to ELF_ET_DYN_BASE (above), | |
| * leave a gap between .bss and brk. | |
| */ | |
| if (!brk_moved) | |
| mm->brk = mm->start_brk = mm->brk + PAGE_SIZE; | |
| mm->brk = mm->start_brk = arch_randomize_brk(mm); | |
| brk_moved = true; | |
| } | |
| #ifdef compat_brk_randomized | |
| if (brk_moved) | |
| current->brk_randomized = 1; | |
| #endif | |
| if (current->personality & MMAP_PAGE_ZERO) { | |
| /* Why this, you ask??? Well SVr4 maps page 0 as read-only, | |
| and some applications "depend" upon this behavior. | |
| Since we do not have the power to recompile these, we | |
| emulate the SVr4 behavior. Sigh. */ | |
| error = vm_mmap(NULL, 0, PAGE_SIZE, PROT_READ | PROT_EXEC, | |
| MAP_FIXED | MAP_PRIVATE, 0); | |
| if (!error) | |
| mseal_mmap_page_zero(); | |
| } | |
| regs = current_pt_regs(); | |
| #ifdef ELF_PLAT_INIT | |
| /* | |
| * The ABI may specify that certain registers be set up in special | |
| * ways (on i386 %edx is the address of a DT_FINI function, for | |
| * example. In addition, it may also specify (eg, PowerPC64 ELF) | |
| * that the e_entry field is the address of the function descriptor | |
| * for the startup routine, rather than the address of the startup | |
| * routine itself. This macro performs whatever initialization to | |
| * the regs structure is required as well as any relocations to the | |
| * function descriptor entries when executing dynamically links apps. | |
| */ | |
| ELF_PLAT_INIT(regs, reloc_func_desc); | |
| #endif | |
| finalize_exec(bprm); | |
| START_THREAD(elf_ex, regs, elf_entry, bprm->p); | |
| retval = 0; | |
| out: | |
| return retval; | |
| /* error cleanup */ | |
| out_free_dentry: | |
| kfree(interp_elf_ex); | |
| kfree(interp_elf_phdata); | |
| out_free_file: | |
| exe_file_allow_write_access(interpreter); | |
| if (interpreter) | |
| fput(interpreter); | |
| out_free_ph: | |
| kfree(elf_phdata); | |
| goto out; | |
| } | |
| #ifdef CONFIG_ELF_CORE | |
| /* | |
| * ELF core dumper | |
| * | |
| * Modelled on fs/exec.c:aout_core_dump() | |
| * Jeremy Fitzhardinge <jeremy@sw.oz.au> | |
| */ | |
| /* An ELF note in memory */ | |
| struct memelfnote | |
| { | |
| const char *name; | |
| int type; | |
| unsigned int datasz; | |
| void *data; | |
| }; | |
| static int notesize(struct memelfnote *en) | |
| { | |
| int sz; | |
| sz = sizeof(struct elf_note); | |
| sz += roundup(strlen(en->name) + 1, 4); | |
| sz += roundup(en->datasz, 4); | |
| return sz; | |
| } | |
| static int writenote(struct memelfnote *men, struct coredump_params *cprm) | |
| { | |
| struct elf_note en; | |
| en.n_namesz = strlen(men->name) + 1; | |
| en.n_descsz = men->datasz; | |
| en.n_type = men->type; | |
| return dump_emit(cprm, &en, sizeof(en)) && | |
| dump_emit(cprm, men->name, en.n_namesz) && dump_align(cprm, 4) && | |
| dump_emit(cprm, men->data, men->datasz) && dump_align(cprm, 4); | |
| } | |
| static void fill_elf_header(struct elfhdr *elf, int segs, | |
| u16 machine, u32 flags) | |
| { | |
| memset(elf, 0, sizeof(*elf)); | |
| memcpy(elf->e_ident, ELFMAG, SELFMAG); | |
| elf->e_ident[EI_CLASS] = ELF_CLASS; | |
| elf->e_ident[EI_DATA] = ELF_DATA; | |
| elf->e_ident[EI_VERSION] = EV_CURRENT; | |
| elf->e_ident[EI_OSABI] = ELF_OSABI; | |
| elf->e_type = ET_CORE; | |
| elf->e_machine = machine; | |
| elf->e_version = EV_CURRENT; | |
| elf->e_phoff = sizeof(struct elfhdr); | |
| elf->e_flags = flags; | |
| elf->e_ehsize = sizeof(struct elfhdr); | |
| elf->e_phentsize = sizeof(struct elf_phdr); | |
| elf->e_phnum = segs; | |
| } | |
| static void fill_elf_note_phdr(struct elf_phdr *phdr, int sz, loff_t offset) | |
| { | |
| phdr->p_type = PT_NOTE; | |
| phdr->p_offset = offset; | |
| phdr->p_vaddr = 0; | |
| phdr->p_paddr = 0; | |
| phdr->p_filesz = sz; | |
| phdr->p_memsz = 0; | |
| phdr->p_flags = 0; | |
| phdr->p_align = 4; | |
| } | |
| static void __fill_note(struct memelfnote *note, const char *name, int type, | |
| unsigned int sz, void *data) | |
| { | |
| note->name = name; | |
| note->type = type; | |
| note->datasz = sz; | |
| note->data = data; | |
| } | |
| #define fill_note(note, type, sz, data) \ | |
| __fill_note(note, NN_ ## type, NT_ ## type, sz, data) | |
| /* | |
| * fill up all the fields in prstatus from the given task struct, except | |
| * registers which need to be filled up separately. | |
| */ | |
| static void fill_prstatus(struct elf_prstatus_common *prstatus, | |
| struct task_struct *p, long signr) | |
| { | |
| prstatus->pr_info.si_signo = prstatus->pr_cursig = signr; | |
| prstatus->pr_sigpend = p->pending.signal.sig[0]; | |
| prstatus->pr_sighold = p->blocked.sig[0]; | |
| rcu_read_lock(); | |
| prstatus->pr_ppid = task_pid_vnr(rcu_dereference(p->real_parent)); | |
| rcu_read_unlock(); | |
| prstatus->pr_pid = task_pid_vnr(p); | |
| prstatus->pr_pgrp = task_pgrp_vnr(p); | |
| prstatus->pr_sid = task_session_vnr(p); | |
| if (thread_group_leader(p)) { | |
| struct task_cputime cputime; | |
| /* | |
| * This is the record for the group leader. It shows the | |
| * group-wide total, not its individual thread total. | |
| */ | |
| thread_group_cputime(p, &cputime); | |
| prstatus->pr_utime = ns_to_kernel_old_timeval(cputime.utime); | |
| prstatus->pr_stime = ns_to_kernel_old_timeval(cputime.stime); | |
| } else { | |
| u64 utime, stime; | |
| task_cputime(p, &utime, &stime); | |
| prstatus->pr_utime = ns_to_kernel_old_timeval(utime); | |
| prstatus->pr_stime = ns_to_kernel_old_timeval(stime); | |
| } | |
| prstatus->pr_cutime = ns_to_kernel_old_timeval(p->signal->cutime); | |
| prstatus->pr_cstime = ns_to_kernel_old_timeval(p->signal->cstime); | |
| } | |
| static int fill_psinfo(struct elf_prpsinfo *psinfo, struct task_struct *p, | |
| struct mm_struct *mm) | |
| { | |
| const struct cred *cred; | |
| unsigned int i, len; | |
| unsigned int state; | |
| /* first copy the parameters from user space */ | |
| memset(psinfo, 0, sizeof(struct elf_prpsinfo)); | |
| len = mm->arg_end - mm->arg_start; | |
| if (len >= ELF_PRARGSZ) | |
| len = ELF_PRARGSZ-1; | |
| if (copy_from_user(&psinfo->pr_psargs, | |
| (const char __user *)mm->arg_start, len)) | |
| return -EFAULT; | |
| for(i = 0; i < len; i++) | |
| if (psinfo->pr_psargs[i] == 0) | |
| psinfo->pr_psargs[i] = ' '; | |
| psinfo->pr_psargs[len] = 0; | |
| rcu_read_lock(); | |
| psinfo->pr_ppid = task_pid_vnr(rcu_dereference(p->real_parent)); | |
| rcu_read_unlock(); | |
| psinfo->pr_pid = task_pid_vnr(p); | |
| psinfo->pr_pgrp = task_pgrp_vnr(p); | |
| psinfo->pr_sid = task_session_vnr(p); | |
| state = READ_ONCE(p->__state); | |
| i = state ? ffz(~state) + 1 : 0; | |
| psinfo->pr_state = i; | |
| psinfo->pr_sname = (i > 5) ? '.' : "RSDTZW"[i]; | |
| psinfo->pr_zomb = psinfo->pr_sname == 'Z'; | |
| psinfo->pr_nice = task_nice(p); | |
| psinfo->pr_flag = p->flags; | |
| rcu_read_lock(); | |
| cred = __task_cred(p); | |
| SET_UID(psinfo->pr_uid, from_kuid_munged(cred->user_ns, cred->uid)); | |
| SET_GID(psinfo->pr_gid, from_kgid_munged(cred->user_ns, cred->gid)); | |
| rcu_read_unlock(); | |
| get_task_comm(psinfo->pr_fname, p); | |
| return 0; | |
| } | |
| static void fill_auxv_note(struct memelfnote *note, struct mm_struct *mm) | |
| { | |
| elf_addr_t *auxv = (elf_addr_t *) mm->saved_auxv; | |
| int i = 0; | |
| do | |
| i += 2; | |
| while (auxv[i - 2] != AT_NULL); | |
| fill_note(note, AUXV, i * sizeof(elf_addr_t), auxv); | |
| } | |
| static void fill_siginfo_note(struct memelfnote *note, user_siginfo_t *csigdata, | |
| const kernel_siginfo_t *siginfo) | |
| { | |
| copy_siginfo_to_external(csigdata, siginfo); | |
| fill_note(note, SIGINFO, sizeof(*csigdata), csigdata); | |
| } | |
| /* | |
| * Format of NT_FILE note: | |
| * | |
| * long count -- how many files are mapped | |
| * long page_size -- units for file_ofs | |
| * array of [COUNT] elements of | |
| * long start | |
| * long end | |
| * long file_ofs | |
| * followed by COUNT filenames in ASCII: "FILE1" NUL "FILE2" NUL... | |
| */ | |
| static int fill_files_note(struct memelfnote *note, struct coredump_params *cprm) | |
| { | |
| unsigned count, size, names_ofs, remaining, n; | |
| user_long_t *data; | |
| user_long_t *start_end_ofs; | |
| char *name_base, *name_curpos; | |
| int i; | |
| /* *Estimated* file count and total data size needed */ | |
| count = cprm->vma_count; | |
| if (count > UINT_MAX / 64) | |
| return -EINVAL; | |
| size = count * 64; | |
| names_ofs = (2 + 3 * count) * sizeof(data[0]); | |
| alloc: | |
| /* paranoia check */ | |
| if (size >= core_file_note_size_limit) { | |
| pr_warn_once("coredump Note size too large: %u (does kernel.core_file_note_size_limit sysctl need adjustment?\n", | |
| size); | |
| return -EINVAL; | |
| } | |
| size = round_up(size, PAGE_SIZE); | |
| /* | |
| * "size" can be 0 here legitimately. | |
| * Let it ENOMEM and omit NT_FILE section which will be empty anyway. | |
| */ | |
| data = kvmalloc(size, GFP_KERNEL); | |
| if (ZERO_OR_NULL_PTR(data)) | |
| return -ENOMEM; | |
| start_end_ofs = data + 2; | |
| name_base = name_curpos = ((char *)data) + names_ofs; | |
| remaining = size - names_ofs; | |
| count = 0; | |
| for (i = 0; i < cprm->vma_count; i++) { | |
| struct core_vma_metadata *m = &cprm->vma_meta[i]; | |
| struct file *file; | |
| const char *filename; | |
| file = m->file; | |
| if (!file) | |
| continue; | |
| filename = file_path(file, name_curpos, remaining); | |
| if (IS_ERR(filename)) { | |
| if (PTR_ERR(filename) == -ENAMETOOLONG) { | |
| kvfree(data); | |
| size = size * 5 / 4; | |
| goto alloc; | |
| } | |
| continue; | |
| } | |
| /* file_path() fills at the end, move name down */ | |
| /* n = strlen(filename) + 1: */ | |
| n = (name_curpos + remaining) - filename; | |
| remaining = filename - name_curpos; | |
| memmove(name_curpos, filename, n); | |
| name_curpos += n; | |
| *start_end_ofs++ = m->start; | |
| *start_end_ofs++ = m->end; | |
| *start_end_ofs++ = m->pgoff; | |
| count++; | |
| } | |
| /* Now we know exact count of files, can store it */ | |
| data[0] = count; | |
| data[1] = PAGE_SIZE; | |
| /* | |
| * Count usually is less than mm->map_count, | |
| * we need to move filenames down. | |
| */ | |
| n = cprm->vma_count - count; | |
| if (n != 0) { | |
| unsigned shift_bytes = n * 3 * sizeof(data[0]); | |
| memmove(name_base - shift_bytes, name_base, | |
| name_curpos - name_base); | |
| name_curpos -= shift_bytes; | |
| } | |
| size = name_curpos - (char *)data; | |
| fill_note(note, FILE, size, data); | |
| return 0; | |
| } | |
| #include <linux/regset.h> | |
| struct elf_thread_core_info { | |
| struct elf_thread_core_info *next; | |
| struct task_struct *task; | |
| struct elf_prstatus prstatus; | |
| struct memelfnote notes[]; | |
| }; | |
| struct elf_note_info { | |
| struct elf_thread_core_info *thread; | |
| struct memelfnote psinfo; | |
| struct memelfnote signote; | |
| struct memelfnote auxv; | |
| struct memelfnote files; | |
| user_siginfo_t csigdata; | |
| size_t size; | |
| int thread_notes; | |
| }; | |
| #ifdef CORE_DUMP_USE_REGSET | |
| /* | |
| * When a regset has a writeback hook, we call it on each thread before | |
| * dumping user memory. On register window machines, this makes sure the | |
| * user memory backing the register data is up to date before we read it. | |
| */ | |
| static void do_thread_regset_writeback(struct task_struct *task, | |
| const struct user_regset *regset) | |
| { | |
| if (regset->writeback) | |
| regset->writeback(task, regset, 1); | |
| } | |
| #ifndef PRSTATUS_SIZE | |
| #define PRSTATUS_SIZE sizeof(struct elf_prstatus) | |
| #endif | |
| #ifndef SET_PR_FPVALID | |
| #define SET_PR_FPVALID(S) ((S)->pr_fpvalid = 1) | |
| #endif | |
| static int fill_thread_core_info(struct elf_thread_core_info *t, | |
| const struct user_regset_view *view, | |
| long signr, struct elf_note_info *info) | |
| { | |
| unsigned int note_iter, view_iter; | |
| /* | |
| * NT_PRSTATUS is the one special case, because the regset data | |
| * goes into the pr_reg field inside the note contents, rather | |
| * than being the whole note contents. We fill the regset in here. | |
| * We assume that regset 0 is NT_PRSTATUS. | |
| */ | |
| fill_prstatus(&t->prstatus.common, t->task, signr); | |
| regset_get(t->task, &view->regsets[0], | |
| sizeof(t->prstatus.pr_reg), &t->prstatus.pr_reg); | |
| fill_note(&t->notes[0], PRSTATUS, PRSTATUS_SIZE, &t->prstatus); | |
| info->size += notesize(&t->notes[0]); | |
| do_thread_regset_writeback(t->task, &view->regsets[0]); | |
| /* | |
| * Each other regset might generate a note too. For each regset | |
| * that has no core_note_type or is inactive, skip it. | |
| */ | |
| note_iter = 1; | |
| for (view_iter = 1; view_iter < view->n; ++view_iter) { | |
| const struct user_regset *regset = &view->regsets[view_iter]; | |
| int note_type = regset->core_note_type; | |
| const char *note_name = regset->core_note_name; | |
| bool is_fpreg = note_type == NT_PRFPREG; | |
| void *data; | |
| int ret; | |
| do_thread_regset_writeback(t->task, regset); | |
| if (!note_type) // not for coredumps | |
| continue; | |
| if (regset->active && regset->active(t->task, regset) <= 0) | |
| continue; | |
| ret = regset_get_alloc(t->task, regset, ~0U, &data); | |
| if (ret < 0) | |
| continue; | |
| if (WARN_ON_ONCE(note_iter >= info->thread_notes)) | |
| break; | |
| if (is_fpreg) | |
| SET_PR_FPVALID(&t->prstatus); | |
| /* There should be a note name, but if not, guess: */ | |
| if (WARN_ON_ONCE(!note_name)) | |
| note_name = "LINUX"; | |
| else | |
| /* Warn on non-legacy-compatible names, for now. */ | |
| WARN_ON_ONCE(strcmp(note_name, | |
| is_fpreg ? "CORE" : "LINUX")); | |
| __fill_note(&t->notes[note_iter], note_name, note_type, | |
| ret, data); | |
| info->size += notesize(&t->notes[note_iter]); | |
| note_iter++; | |
| } | |
| return 1; | |
| } | |
| #else | |
| static int fill_thread_core_info(struct elf_thread_core_info *t, | |
| const struct user_regset_view *view, | |
| long signr, struct elf_note_info *info) | |
| { | |
| struct task_struct *p = t->task; | |
| elf_fpregset_t *fpu; | |
| fill_prstatus(&t->prstatus.common, p, signr); | |
| elf_core_copy_task_regs(p, &t->prstatus.pr_reg); | |
| fill_note(&t->notes[0], PRSTATUS, sizeof(t->prstatus), &t->prstatus); | |
| info->size += notesize(&t->notes[0]); | |
| fpu = kzalloc_obj(elf_fpregset_t); | |
| if (!fpu || !elf_core_copy_task_fpregs(p, fpu)) { | |
| kfree(fpu); | |
| return 1; | |
| } | |
| t->prstatus.pr_fpvalid = 1; | |
| fill_note(&t->notes[1], PRFPREG, sizeof(*fpu), fpu); | |
| info->size += notesize(&t->notes[1]); | |
| return 1; | |
| } | |
| #endif | |
| static int fill_note_info(struct elfhdr *elf, int phdrs, | |
| struct elf_note_info *info, | |
| struct coredump_params *cprm) | |
| { | |
| struct task_struct *dump_task = current; | |
| const struct user_regset_view *view; | |
| struct elf_thread_core_info *t; | |
| struct elf_prpsinfo *psinfo; | |
| struct core_thread *ct; | |
| u16 machine; | |
| u32 flags; | |
| psinfo = kmalloc_obj(*psinfo); | |
| if (!psinfo) | |
| return 0; | |
| fill_note(&info->psinfo, PRPSINFO, sizeof(*psinfo), psinfo); | |
| #ifdef CORE_DUMP_USE_REGSET | |
| view = task_user_regset_view(dump_task); | |
| /* | |
| * Figure out how many notes we're going to need for each thread. | |
| */ | |
| info->thread_notes = 0; | |
| for (int i = 0; i < view->n; ++i) | |
| if (view->regsets[i].core_note_type != 0) | |
| ++info->thread_notes; | |
| /* | |
| * Sanity check. We rely on regset 0 being in NT_PRSTATUS, | |
| * since it is our one special case. | |
| */ | |
| if (unlikely(info->thread_notes == 0) || | |
| unlikely(view->regsets[0].core_note_type != NT_PRSTATUS)) { | |
| WARN_ON(1); | |
| return 0; | |
| } | |
| machine = view->e_machine; | |
| flags = view->e_flags; | |
| #else | |
| view = NULL; | |
| info->thread_notes = 2; | |
| machine = ELF_ARCH; | |
| flags = ELF_CORE_EFLAGS; | |
| #endif | |
| /* | |
| * Override ELF e_flags with value taken from process, | |
| * if arch needs that. | |
| */ | |
| flags = elf_coredump_get_mm_eflags(dump_task->mm, flags); | |
| /* | |
| * Initialize the ELF file header. | |
| */ | |
| fill_elf_header(elf, phdrs, machine, flags); | |
| /* | |
| * Allocate a structure for each thread. | |
| */ | |
| info->thread = kzalloc_flex(*info->thread, notes, info->thread_notes); | |
| if (unlikely(!info->thread)) | |
| return 0; | |
| info->thread->task = dump_task; | |
| for (ct = dump_task->signal->core_state->dumper.next; ct; ct = ct->next) { | |
| t = kzalloc_flex(*t, notes, info->thread_notes); | |
| if (unlikely(!t)) | |
| return 0; | |
| t->task = ct->task; | |
| t->next = info->thread->next; | |
| info->thread->next = t; | |
| } | |
| /* | |
| * Now fill in each thread's information. | |
| */ | |
| for (t = info->thread; t != NULL; t = t->next) | |
| if (!fill_thread_core_info(t, view, cprm->siginfo->si_signo, info)) | |
| return 0; | |
| /* | |
| * Fill in the two process-wide notes. | |
| */ | |
| fill_psinfo(psinfo, dump_task->group_leader, dump_task->mm); | |
| info->size += notesize(&info->psinfo); | |
| fill_siginfo_note(&info->signote, &info->csigdata, cprm->siginfo); | |
| info->size += notesize(&info->signote); | |
| fill_auxv_note(&info->auxv, current->mm); | |
| info->size += notesize(&info->auxv); | |
| if (fill_files_note(&info->files, cprm) == 0) | |
| info->size += notesize(&info->files); | |
| return 1; | |
| } | |
| /* | |
| * Write all the notes for each thread. When writing the first thread, the | |
| * process-wide notes are interleaved after the first thread-specific note. | |
| */ | |
| static int write_note_info(struct elf_note_info *info, | |
| struct coredump_params *cprm) | |
| { | |
| bool first = true; | |
| struct elf_thread_core_info *t = info->thread; | |
| do { | |
| int i; | |
| if (!writenote(&t->notes[0], cprm)) | |
| return 0; | |
| if (first && !writenote(&info->psinfo, cprm)) | |
| return 0; | |
| if (first && !writenote(&info->signote, cprm)) | |
| return 0; | |
| if (first && !writenote(&info->auxv, cprm)) | |
| return 0; | |
| if (first && info->files.data && | |
| !writenote(&info->files, cprm)) | |
| return 0; | |
| for (i = 1; i < info->thread_notes; ++i) | |
| if (t->notes[i].data && | |
| !writenote(&t->notes[i], cprm)) | |
| return 0; | |
| first = false; | |
| t = t->next; | |
| } while (t); | |
| return 1; | |
| } | |
| static void free_note_info(struct elf_note_info *info) | |
| { | |
| struct elf_thread_core_info *threads = info->thread; | |
| while (threads) { | |
| unsigned int i; | |
| struct elf_thread_core_info *t = threads; | |
| threads = t->next; | |
| WARN_ON(t->notes[0].data && t->notes[0].data != &t->prstatus); | |
| for (i = 1; i < info->thread_notes; ++i) | |
| kvfree(t->notes[i].data); | |
| kfree(t); | |
| } | |
| kfree(info->psinfo.data); | |
| kvfree(info->files.data); | |
| } | |
| static void fill_extnum_info(struct elfhdr *elf, struct elf_shdr *shdr4extnum, | |
| elf_addr_t e_shoff, int segs) | |
| { | |
| elf->e_shoff = e_shoff; | |
| elf->e_shentsize = sizeof(*shdr4extnum); | |
| elf->e_shnum = 1; | |
| elf->e_shstrndx = SHN_UNDEF; | |
| memset(shdr4extnum, 0, sizeof(*shdr4extnum)); | |
| shdr4extnum->sh_type = SHT_NULL; | |
| shdr4extnum->sh_size = elf->e_shnum; | |
| shdr4extnum->sh_link = elf->e_shstrndx; | |
| shdr4extnum->sh_info = segs; | |
| } | |
| /* | |
| * Actual dumper | |
| * | |
| * This is a two-pass process; first we find the offsets of the bits, | |
| * and then they are actually written out. If we run out of core limit | |
| * we just truncate. | |
| */ | |
| static int elf_core_dump(struct coredump_params *cprm) | |
| { | |
| int has_dumped = 0; | |
| int segs, i; | |
| struct elfhdr elf; | |
| loff_t offset = 0, dataoff; | |
| struct elf_note_info info = { }; | |
| struct elf_phdr *phdr4note = NULL; | |
| struct elf_shdr *shdr4extnum = NULL; | |
| Elf_Half e_phnum; | |
| elf_addr_t e_shoff; | |
| /* | |
| * The number of segs are recored into ELF header as 16bit value. | |
| * Please check DEFAULT_MAX_MAP_COUNT definition when you modify here. | |
| */ | |
| segs = cprm->vma_count + elf_core_extra_phdrs(cprm); | |
| /* for notes section */ | |
| segs++; | |
| /* If segs > PN_XNUM(0xffff), then e_phnum overflows. To avoid | |
| * this, kernel supports extended numbering. Have a look at | |
| * include/linux/elf.h for further information. */ | |
| e_phnum = segs > PN_XNUM ? PN_XNUM : segs; | |
| /* | |
| * Collect all the non-memory information about the process for the | |
| * notes. This also sets up the file header. | |
| */ | |
| if (!fill_note_info(&elf, e_phnum, &info, cprm)) | |
| goto end_coredump; | |
| has_dumped = 1; | |
| offset += sizeof(elf); /* ELF header */ | |
| offset += segs * sizeof(struct elf_phdr); /* Program headers */ | |
| /* Write notes phdr entry */ | |
| { | |
| size_t sz = info.size; | |
| /* For cell spufs and x86 xstate */ | |
| sz += elf_coredump_extra_notes_size(); | |
| phdr4note = kmalloc_obj(*phdr4note); | |
| if (!phdr4note) | |
| goto end_coredump; | |
| fill_elf_note_phdr(phdr4note, sz, offset); | |
| offset += sz; | |
| } | |
| dataoff = offset = roundup(offset, ELF_EXEC_PAGESIZE); | |
| offset += cprm->vma_data_size; | |
| offset += elf_core_extra_data_size(cprm); | |
| e_shoff = offset; | |
| if (e_phnum == PN_XNUM) { | |
| shdr4extnum = kmalloc_obj(*shdr4extnum); | |
| if (!shdr4extnum) | |
| goto end_coredump; | |
| fill_extnum_info(&elf, shdr4extnum, e_shoff, segs); | |
| } | |
| offset = dataoff; | |
| if (!dump_emit(cprm, &elf, sizeof(elf))) | |
| goto end_coredump; | |
| if (!dump_emit(cprm, phdr4note, sizeof(*phdr4note))) | |
| goto end_coredump; | |
| /* Write program headers for segments dump */ | |
| for (i = 0; i < cprm->vma_count; i++) { | |
| struct core_vma_metadata *meta = cprm->vma_meta + i; | |
| struct elf_phdr phdr; | |
| phdr.p_type = PT_LOAD; | |
| phdr.p_offset = offset; | |
| phdr.p_vaddr = meta->start; | |
| phdr.p_paddr = 0; | |
| phdr.p_filesz = meta->dump_size; | |
| phdr.p_memsz = meta->end - meta->start; | |
| offset += phdr.p_filesz; | |
| phdr.p_flags = 0; | |
| if (meta->flags & VM_READ) | |
| phdr.p_flags |= PF_R; | |
| if (meta->flags & VM_WRITE) | |
| phdr.p_flags |= PF_W; | |
| if (meta->flags & VM_EXEC) | |
| phdr.p_flags |= PF_X; | |
| phdr.p_align = ELF_EXEC_PAGESIZE; | |
| if (!dump_emit(cprm, &phdr, sizeof(phdr))) | |
| goto end_coredump; | |
| } | |
| if (!elf_core_write_extra_phdrs(cprm, offset)) | |
| goto end_coredump; | |
| /* write out the notes section */ | |
| if (!write_note_info(&info, cprm)) | |
| goto end_coredump; | |
| /* For cell spufs and x86 xstate */ | |
| if (elf_coredump_extra_notes_write(cprm)) | |
| goto end_coredump; | |
| /* Align to page */ | |
| dump_skip_to(cprm, dataoff); | |
| for (i = 0; i < cprm->vma_count; i++) { | |
| struct core_vma_metadata *meta = cprm->vma_meta + i; | |
| if (!dump_user_range(cprm, meta->start, meta->dump_size)) | |
| goto end_coredump; | |
| } | |
| if (!elf_core_write_extra_data(cprm)) | |
| goto end_coredump; | |
| if (e_phnum == PN_XNUM) { | |
| if (!dump_emit(cprm, shdr4extnum, sizeof(*shdr4extnum))) | |
| goto end_coredump; | |
| } | |
| end_coredump: | |
| free_note_info(&info); | |
| kfree(shdr4extnum); | |
| kfree(phdr4note); | |
| return has_dumped; | |
| } | |
| #endif /* CONFIG_ELF_CORE */ | |
| static int __init init_elf_binfmt(void) | |
| { | |
| register_binfmt(&elf_format); | |
| return 0; | |
| } | |
| static void __exit exit_elf_binfmt(void) | |
| { | |
| /* Remove the COFF and ELF loaders. */ | |
| unregister_binfmt(&elf_format); | |
| } | |
| core_initcall(init_elf_binfmt); | |
| module_exit(exit_elf_binfmt); | |
| #ifdef CONFIG_BINFMT_ELF_KUNIT_TEST | |
| #include "tests/binfmt_elf_kunit.c" | |
| #endif |