| /* SPDX-License-Identifier: GPL-2.0-or-later */ | |
| /* | |
| * drivers/net/bond/bond_options.h - bonding options | |
| * Copyright (c) 2013 Nikolay Aleksandrov <nikolay@redhat.com> | |
| */ | |
| #ifndef _NET_BOND_OPTIONS_H | |
| #define _NET_BOND_OPTIONS_H | |
| #include <linux/bits.h> | |
| #include <linux/limits.h> | |
| #include <linux/types.h> | |
| #include <linux/string.h> | |
| struct netlink_ext_ack; | |
| struct nlattr; | |
| #define BOND_OPT_MAX_NAMELEN 32 | |
| #define BOND_OPT_VALID(opt) ((opt) < BOND_OPT_LAST) | |
| #define BOND_MODE_ALL_EX(x) (~(x)) | |
| /* Option flags: | |
| * BOND_OPTFLAG_NOSLAVES - check if the bond device is empty before setting | |
| * BOND_OPTFLAG_IFDOWN - check if the bond device is down before setting | |
| * BOND_OPTFLAG_RAWVAL - the option parses the value itself | |
| */ | |
| enum { | |
| BOND_OPTFLAG_NOSLAVES = BIT(0), | |
| BOND_OPTFLAG_IFDOWN = BIT(1), | |
| BOND_OPTFLAG_RAWVAL = BIT(2) | |
| }; | |
| /* Value type flags: | |
| * BOND_VALFLAG_DEFAULT - mark the value as default | |
| * BOND_VALFLAG_(MIN|MAX) - mark the value as min/max | |
| */ | |
| enum { | |
| BOND_VALFLAG_DEFAULT = BIT(0), | |
| BOND_VALFLAG_MIN = BIT(1), | |
| BOND_VALFLAG_MAX = BIT(2) | |
| }; | |
| /* Option IDs, their bit positions correspond to their IDs */ | |
| enum { | |
| BOND_OPT_MODE, | |
| BOND_OPT_PACKETS_PER_SLAVE, | |
| BOND_OPT_XMIT_HASH, | |
| BOND_OPT_ARP_VALIDATE, | |
| BOND_OPT_ARP_ALL_TARGETS, | |
| BOND_OPT_FAIL_OVER_MAC, | |
| BOND_OPT_ARP_INTERVAL, | |
| BOND_OPT_ARP_TARGETS, | |
| BOND_OPT_DOWNDELAY, | |
| BOND_OPT_UPDELAY, | |
| BOND_OPT_LACP_RATE, | |
| BOND_OPT_MINLINKS, | |
| BOND_OPT_AD_SELECT, | |
| BOND_OPT_NUM_PEER_NOTIF, | |
| BOND_OPT_MIIMON, | |
| BOND_OPT_PRIMARY, | |
| BOND_OPT_PRIMARY_RESELECT, | |
| BOND_OPT_USE_CARRIER, | |
| BOND_OPT_ACTIVE_SLAVE, | |
| BOND_OPT_QUEUE_ID, | |
| BOND_OPT_ALL_SLAVES_ACTIVE, | |
| BOND_OPT_RESEND_IGMP, | |
| BOND_OPT_LP_INTERVAL, | |
| BOND_OPT_SLAVES, | |
| BOND_OPT_TLB_DYNAMIC_LB, | |
| BOND_OPT_AD_ACTOR_SYS_PRIO, | |
| BOND_OPT_AD_ACTOR_SYSTEM, | |
| BOND_OPT_AD_USER_PORT_KEY, | |
| BOND_OPT_NUM_PEER_NOTIF_ALIAS, | |
| BOND_OPT_PEER_NOTIF_DELAY, | |
| BOND_OPT_LACP_ACTIVE, | |
| BOND_OPT_MISSED_MAX, | |
| BOND_OPT_NS_TARGETS, | |
| BOND_OPT_PRIO, | |
| BOND_OPT_LAST | |
| }; | |
| /* This structure is used for storing option values and for passing option | |
| * values when changing an option. The logic when used as an arg is as follows: | |
| * - if value != ULLONG_MAX -> parse value | |
| * - if string != NULL -> parse string | |
| * - if the opt is RAW data and length less than maxlen, | |
| * copy the data to extra storage | |
| */ | |
| #define BOND_OPT_EXTRA_MAXLEN 16 | |
| struct bond_opt_value { | |
| char *string; | |
| u64 value; | |
| u32 flags; | |
| union { | |
| char extra[BOND_OPT_EXTRA_MAXLEN]; | |
| struct net_device *slave_dev; | |
| }; | |
| }; | |
| struct bonding; | |
| struct bond_option { | |
| int id; | |
| const char *name; | |
| const char *desc; | |
| u32 flags; | |
| /* unsuppmodes is used to denote modes in which the option isn't | |
| * supported. | |
| */ | |
| unsigned long unsuppmodes; | |
| /* supported values which this option can have, can be a subset of | |
| * BOND_OPTVAL_RANGE's value range | |
| */ | |
| const struct bond_opt_value *values; | |
| int (*set)(struct bonding *bond, const struct bond_opt_value *val); | |
| }; | |
| int __bond_opt_set(struct bonding *bond, unsigned int option, | |
| struct bond_opt_value *val, | |
| struct nlattr *bad_attr, struct netlink_ext_ack *extack); | |
| int __bond_opt_set_notify(struct bonding *bond, unsigned int option, | |
| struct bond_opt_value *val); | |
| int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf); | |
| const struct bond_opt_value *bond_opt_parse(const struct bond_option *opt, | |
| struct bond_opt_value *val); | |
| const struct bond_option *bond_opt_get(unsigned int option); | |
| const struct bond_option *bond_opt_get_by_name(const char *name); | |
| const struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val); | |
| /* This helper is used to initialize a bond_opt_value structure for parameter | |
| * passing. There should be either a valid string or value, but not both. | |
| * When value is ULLONG_MAX then string will be used. | |
| */ | |
| static inline void __bond_opt_init(struct bond_opt_value *optval, | |
| char *string, u64 value, | |
| void *extra, size_t extra_len) | |
| { | |
| memset(optval, 0, sizeof(*optval)); | |
| optval->value = ULLONG_MAX; | |
| if (value != ULLONG_MAX) | |
| optval->value = value; | |
| else if (string) | |
| optval->string = string; | |
| if (extra && extra_len <= BOND_OPT_EXTRA_MAXLEN) | |
| memcpy(optval->extra, extra, extra_len); | |
| } | |
| #define bond_opt_initval(optval, value) __bond_opt_init(optval, NULL, value, NULL, 0) | |
| #define bond_opt_initstr(optval, str) __bond_opt_init(optval, str, ULLONG_MAX, NULL, 0) | |
| #define bond_opt_initextra(optval, extra, extra_len) \ | |
| __bond_opt_init(optval, NULL, ULLONG_MAX, extra, extra_len) | |
| #define bond_opt_slave_initval(optval, slave_dev, value) \ | |
| __bond_opt_init(optval, NULL, value, slave_dev, sizeof(struct net_device *)) | |
| void bond_option_arp_ip_targets_clear(struct bonding *bond); | |
| #if IS_ENABLED(CONFIG_IPV6) | |
| void bond_option_ns_ip6_targets_clear(struct bonding *bond); | |
| #endif | |
| #endif /* _NET_BOND_OPTIONS_H */ |