| /* | |
| * Copyright (C) 2015-2017 Broadcom | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation version 2. | |
| * | |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any | |
| * kind, whether express or implied; without even the implied warranty | |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #include <linux/bitops.h> | |
| #include <linux/gpio/driver.h> | |
| #include <linux/of_device.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/module.h> | |
| #include <linux/irqdomain.h> | |
| #include <linux/irqchip/chained_irq.h> | |
| #include <linux/interrupt.h> | |
| enum gio_reg_index { | |
| GIO_REG_ODEN = 0, | |
| GIO_REG_DATA, | |
| GIO_REG_IODIR, | |
| GIO_REG_EC, | |
| GIO_REG_EI, | |
| GIO_REG_MASK, | |
| GIO_REG_LEVEL, | |
| GIO_REG_STAT, | |
| NUMBER_OF_GIO_REGISTERS | |
| }; | |
| #define GIO_BANK_SIZE (NUMBER_OF_GIO_REGISTERS * sizeof(u32)) | |
| #define GIO_BANK_OFF(bank, off) (((bank) * GIO_BANK_SIZE) + (off * sizeof(u32))) | |
| #define GIO_ODEN(bank) GIO_BANK_OFF(bank, GIO_REG_ODEN) | |
| #define GIO_DATA(bank) GIO_BANK_OFF(bank, GIO_REG_DATA) | |
| #define GIO_IODIR(bank) GIO_BANK_OFF(bank, GIO_REG_IODIR) | |
| #define GIO_EC(bank) GIO_BANK_OFF(bank, GIO_REG_EC) | |
| #define GIO_EI(bank) GIO_BANK_OFF(bank, GIO_REG_EI) | |
| #define GIO_MASK(bank) GIO_BANK_OFF(bank, GIO_REG_MASK) | |
| #define GIO_LEVEL(bank) GIO_BANK_OFF(bank, GIO_REG_LEVEL) | |
| #define GIO_STAT(bank) GIO_BANK_OFF(bank, GIO_REG_STAT) | |
| struct brcmstb_gpio_bank { | |
| struct list_head node; | |
| int id; | |
| struct gpio_chip gc; | |
| struct brcmstb_gpio_priv *parent_priv; | |
| u32 width; | |
| u32 wake_active; | |
| u32 saved_regs[GIO_REG_STAT]; /* Don't save and restore GIO_REG_STAT */ | |
| }; | |
| struct brcmstb_gpio_priv { | |
| struct list_head bank_list; | |
| void __iomem *reg_base; | |
| struct platform_device *pdev; | |
| struct irq_domain *irq_domain; | |
| struct irq_chip irq_chip; | |
| int parent_irq; | |
| int gpio_base; | |
| int num_gpios; | |
| int parent_wake_irq; | |
| }; | |
| #define MAX_GPIO_PER_BANK 32 | |
| #define GPIO_BANK(gpio) ((gpio) >> 5) | |
| /* assumes MAX_GPIO_PER_BANK is a multiple of 2 */ | |
| #define GPIO_BIT(gpio) ((gpio) & (MAX_GPIO_PER_BANK - 1)) | |
| static inline struct brcmstb_gpio_priv * | |
| brcmstb_gpio_gc_to_priv(struct gpio_chip *gc) | |
| { | |
| struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); | |
| return bank->parent_priv; | |
| } | |
| static unsigned long | |
| __brcmstb_gpio_get_active_irqs(struct brcmstb_gpio_bank *bank) | |
| { | |
| void __iomem *reg_base = bank->parent_priv->reg_base; | |
| return bank->gc.read_reg(reg_base + GIO_STAT(bank->id)) & | |
| bank->gc.read_reg(reg_base + GIO_MASK(bank->id)); | |
| } | |
| static unsigned long | |
| brcmstb_gpio_get_active_irqs(struct brcmstb_gpio_bank *bank) | |
| { | |
| unsigned long status; | |
| unsigned long flags; | |
| spin_lock_irqsave(&bank->gc.bgpio_lock, flags); | |
| status = __brcmstb_gpio_get_active_irqs(bank); | |
| spin_unlock_irqrestore(&bank->gc.bgpio_lock, flags); | |
| return status; | |
| } | |
| static int brcmstb_gpio_hwirq_to_offset(irq_hw_number_t hwirq, | |
| struct brcmstb_gpio_bank *bank) | |
| { | |
| return hwirq - (bank->gc.base - bank->parent_priv->gpio_base); | |
| } | |
| static void brcmstb_gpio_set_imask(struct brcmstb_gpio_bank *bank, | |
| unsigned int hwirq, bool enable) | |
| { | |
| struct gpio_chip *gc = &bank->gc; | |
| struct brcmstb_gpio_priv *priv = bank->parent_priv; | |
| u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(hwirq, bank)); | |
| u32 imask; | |
| unsigned long flags; | |
| spin_lock_irqsave(&gc->bgpio_lock, flags); | |
| imask = gc->read_reg(priv->reg_base + GIO_MASK(bank->id)); | |
| if (enable) | |
| imask |= mask; | |
| else | |
| imask &= ~mask; | |
| gc->write_reg(priv->reg_base + GIO_MASK(bank->id), imask); | |
| spin_unlock_irqrestore(&gc->bgpio_lock, flags); | |
| } | |
| static int brcmstb_gpio_to_irq(struct gpio_chip *gc, unsigned offset) | |
| { | |
| struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc); | |
| /* gc_offset is relative to this gpio_chip; want real offset */ | |
| int hwirq = offset + (gc->base - priv->gpio_base); | |
| if (hwirq >= priv->num_gpios) | |
| return -ENXIO; | |
| return irq_create_mapping(priv->irq_domain, hwirq); | |
| } | |
| /* -------------------- IRQ chip functions -------------------- */ | |
| static void brcmstb_gpio_irq_mask(struct irq_data *d) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
| struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); | |
| brcmstb_gpio_set_imask(bank, d->hwirq, false); | |
| } | |
| static void brcmstb_gpio_irq_unmask(struct irq_data *d) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
| struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); | |
| brcmstb_gpio_set_imask(bank, d->hwirq, true); | |
| } | |
| static void brcmstb_gpio_irq_ack(struct irq_data *d) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
| struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); | |
| struct brcmstb_gpio_priv *priv = bank->parent_priv; | |
| u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(d->hwirq, bank)); | |
| gc->write_reg(priv->reg_base + GIO_STAT(bank->id), mask); | |
| } | |
| static int brcmstb_gpio_irq_set_type(struct irq_data *d, unsigned int type) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
| struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); | |
| struct brcmstb_gpio_priv *priv = bank->parent_priv; | |
| u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(d->hwirq, bank)); | |
| u32 edge_insensitive, iedge_insensitive; | |
| u32 edge_config, iedge_config; | |
| u32 level, ilevel; | |
| unsigned long flags; | |
| switch (type) { | |
| case IRQ_TYPE_LEVEL_LOW: | |
| level = mask; | |
| edge_config = 0; | |
| edge_insensitive = 0; | |
| break; | |
| case IRQ_TYPE_LEVEL_HIGH: | |
| level = mask; | |
| edge_config = mask; | |
| edge_insensitive = 0; | |
| break; | |
| case IRQ_TYPE_EDGE_FALLING: | |
| level = 0; | |
| edge_config = 0; | |
| edge_insensitive = 0; | |
| break; | |
| case IRQ_TYPE_EDGE_RISING: | |
| level = 0; | |
| edge_config = mask; | |
| edge_insensitive = 0; | |
| break; | |
| case IRQ_TYPE_EDGE_BOTH: | |
| level = 0; | |
| edge_config = 0; /* don't care, but want known value */ | |
| edge_insensitive = mask; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| spin_lock_irqsave(&bank->gc.bgpio_lock, flags); | |
| iedge_config = bank->gc.read_reg(priv->reg_base + | |
| GIO_EC(bank->id)) & ~mask; | |
| iedge_insensitive = bank->gc.read_reg(priv->reg_base + | |
| GIO_EI(bank->id)) & ~mask; | |
| ilevel = bank->gc.read_reg(priv->reg_base + | |
| GIO_LEVEL(bank->id)) & ~mask; | |
| bank->gc.write_reg(priv->reg_base + GIO_EC(bank->id), | |
| iedge_config | edge_config); | |
| bank->gc.write_reg(priv->reg_base + GIO_EI(bank->id), | |
| iedge_insensitive | edge_insensitive); | |
| bank->gc.write_reg(priv->reg_base + GIO_LEVEL(bank->id), | |
| ilevel | level); | |
| spin_unlock_irqrestore(&bank->gc.bgpio_lock, flags); | |
| return 0; | |
| } | |
| static int brcmstb_gpio_priv_set_wake(struct brcmstb_gpio_priv *priv, | |
| unsigned int enable) | |
| { | |
| int ret = 0; | |
| if (enable) | |
| ret = enable_irq_wake(priv->parent_wake_irq); | |
| else | |
| ret = disable_irq_wake(priv->parent_wake_irq); | |
| if (ret) | |
| dev_err(&priv->pdev->dev, "failed to %s wake-up interrupt\n", | |
| enable ? "enable" : "disable"); | |
| return ret; | |
| } | |
| static int brcmstb_gpio_irq_set_wake(struct irq_data *d, unsigned int enable) | |
| { | |
| struct gpio_chip *gc = irq_data_get_irq_chip_data(d); | |
| struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); | |
| struct brcmstb_gpio_priv *priv = bank->parent_priv; | |
| u32 mask = BIT(brcmstb_gpio_hwirq_to_offset(d->hwirq, bank)); | |
| /* | |
| * Do not do anything specific for now, suspend/resume callbacks will | |
| * configure the interrupt mask appropriately | |
| */ | |
| if (enable) | |
| bank->wake_active |= mask; | |
| else | |
| bank->wake_active &= ~mask; | |
| return brcmstb_gpio_priv_set_wake(priv, enable); | |
| } | |
| static irqreturn_t brcmstb_gpio_wake_irq_handler(int irq, void *data) | |
| { | |
| struct brcmstb_gpio_priv *priv = data; | |
| if (!priv || irq != priv->parent_wake_irq) | |
| return IRQ_NONE; | |
| /* Nothing to do */ | |
| return IRQ_HANDLED; | |
| } | |
| static void brcmstb_gpio_irq_bank_handler(struct brcmstb_gpio_bank *bank) | |
| { | |
| struct brcmstb_gpio_priv *priv = bank->parent_priv; | |
| struct irq_domain *domain = priv->irq_domain; | |
| int hwbase = bank->gc.base - priv->gpio_base; | |
| unsigned long status; | |
| while ((status = brcmstb_gpio_get_active_irqs(bank))) { | |
| unsigned int irq, offset; | |
| for_each_set_bit(offset, &status, 32) { | |
| if (offset >= bank->width) | |
| dev_warn(&priv->pdev->dev, | |
| "IRQ for invalid GPIO (bank=%d, offset=%d)\n", | |
| bank->id, offset); | |
| irq = irq_linear_revmap(domain, hwbase + offset); | |
| generic_handle_irq(irq); | |
| } | |
| } | |
| } | |
| /* Each UPG GIO block has one IRQ for all banks */ | |
| static void brcmstb_gpio_irq_handler(struct irq_desc *desc) | |
| { | |
| struct brcmstb_gpio_priv *priv = irq_desc_get_handler_data(desc); | |
| struct irq_chip *chip = irq_desc_get_chip(desc); | |
| struct brcmstb_gpio_bank *bank; | |
| /* Interrupts weren't properly cleared during probe */ | |
| BUG_ON(!priv || !chip); | |
| chained_irq_enter(chip, desc); | |
| list_for_each_entry(bank, &priv->bank_list, node) | |
| brcmstb_gpio_irq_bank_handler(bank); | |
| chained_irq_exit(chip, desc); | |
| } | |
| static struct brcmstb_gpio_bank *brcmstb_gpio_hwirq_to_bank( | |
| struct brcmstb_gpio_priv *priv, irq_hw_number_t hwirq) | |
| { | |
| struct brcmstb_gpio_bank *bank; | |
| int i = 0; | |
| /* banks are in descending order */ | |
| list_for_each_entry_reverse(bank, &priv->bank_list, node) { | |
| i += bank->gc.ngpio; | |
| if (hwirq < i) | |
| return bank; | |
| } | |
| return NULL; | |
| } | |
| /* | |
| * This lock class tells lockdep that GPIO irqs are in a different | |
| * category than their parents, so it won't report false recursion. | |
| */ | |
| static struct lock_class_key brcmstb_gpio_irq_lock_class; | |
| static struct lock_class_key brcmstb_gpio_irq_request_class; | |
| static int brcmstb_gpio_irq_map(struct irq_domain *d, unsigned int irq, | |
| irq_hw_number_t hwirq) | |
| { | |
| struct brcmstb_gpio_priv *priv = d->host_data; | |
| struct brcmstb_gpio_bank *bank = | |
| brcmstb_gpio_hwirq_to_bank(priv, hwirq); | |
| struct platform_device *pdev = priv->pdev; | |
| int ret; | |
| if (!bank) | |
| return -EINVAL; | |
| dev_dbg(&pdev->dev, "Mapping irq %d for gpio line %d (bank %d)\n", | |
| irq, (int)hwirq, bank->id); | |
| ret = irq_set_chip_data(irq, &bank->gc); | |
| if (ret < 0) | |
| return ret; | |
| irq_set_lockdep_class(irq, &brcmstb_gpio_irq_lock_class, | |
| &brcmstb_gpio_irq_request_class); | |
| irq_set_chip_and_handler(irq, &priv->irq_chip, handle_level_irq); | |
| irq_set_noprobe(irq); | |
| return 0; | |
| } | |
| static void brcmstb_gpio_irq_unmap(struct irq_domain *d, unsigned int irq) | |
| { | |
| irq_set_chip_and_handler(irq, NULL, NULL); | |
| irq_set_chip_data(irq, NULL); | |
| } | |
| static const struct irq_domain_ops brcmstb_gpio_irq_domain_ops = { | |
| .map = brcmstb_gpio_irq_map, | |
| .unmap = brcmstb_gpio_irq_unmap, | |
| .xlate = irq_domain_xlate_twocell, | |
| }; | |
| /* Make sure that the number of banks matches up between properties */ | |
| static int brcmstb_gpio_sanity_check_banks(struct device *dev, | |
| struct device_node *np, struct resource *res) | |
| { | |
| int res_num_banks = resource_size(res) / GIO_BANK_SIZE; | |
| int num_banks = | |
| of_property_count_u32_elems(np, "brcm,gpio-bank-widths"); | |
| if (res_num_banks != num_banks) { | |
| dev_err(dev, "Mismatch in banks: res had %d, bank-widths had %d\n", | |
| res_num_banks, num_banks); | |
| return -EINVAL; | |
| } else { | |
| return 0; | |
| } | |
| } | |
| static int brcmstb_gpio_remove(struct platform_device *pdev) | |
| { | |
| struct brcmstb_gpio_priv *priv = platform_get_drvdata(pdev); | |
| struct brcmstb_gpio_bank *bank; | |
| int offset, ret = 0, virq; | |
| if (!priv) { | |
| dev_err(&pdev->dev, "called %s without drvdata!\n", __func__); | |
| return -EFAULT; | |
| } | |
| if (priv->parent_irq > 0) | |
| irq_set_chained_handler_and_data(priv->parent_irq, NULL, NULL); | |
| /* Remove all IRQ mappings and delete the domain */ | |
| if (priv->irq_domain) { | |
| for (offset = 0; offset < priv->num_gpios; offset++) { | |
| virq = irq_find_mapping(priv->irq_domain, offset); | |
| irq_dispose_mapping(virq); | |
| } | |
| irq_domain_remove(priv->irq_domain); | |
| } | |
| /* | |
| * You can lose return values below, but we report all errors, and it's | |
| * more important to actually perform all of the steps. | |
| */ | |
| list_for_each_entry(bank, &priv->bank_list, node) | |
| gpiochip_remove(&bank->gc); | |
| return ret; | |
| } | |
| static int brcmstb_gpio_of_xlate(struct gpio_chip *gc, | |
| const struct of_phandle_args *gpiospec, u32 *flags) | |
| { | |
| struct brcmstb_gpio_priv *priv = brcmstb_gpio_gc_to_priv(gc); | |
| struct brcmstb_gpio_bank *bank = gpiochip_get_data(gc); | |
| int offset; | |
| if (gc->of_gpio_n_cells != 2) { | |
| WARN_ON(1); | |
| return -EINVAL; | |
| } | |
| if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells)) | |
| return -EINVAL; | |
| offset = gpiospec->args[0] - (gc->base - priv->gpio_base); | |
| if (offset >= gc->ngpio || offset < 0) | |
| return -EINVAL; | |
| if (unlikely(offset >= bank->width)) { | |
| dev_warn_ratelimited(&priv->pdev->dev, | |
| "Received request for invalid GPIO offset %d\n", | |
| gpiospec->args[0]); | |
| } | |
| if (flags) | |
| *flags = gpiospec->args[1]; | |
| return offset; | |
| } | |
| /* priv->parent_irq and priv->num_gpios must be set before calling */ | |
| static int brcmstb_gpio_irq_setup(struct platform_device *pdev, | |
| struct brcmstb_gpio_priv *priv) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct device_node *np = dev->of_node; | |
| int err; | |
| priv->irq_domain = | |
| irq_domain_add_linear(np, priv->num_gpios, | |
| &brcmstb_gpio_irq_domain_ops, | |
| priv); | |
| if (!priv->irq_domain) { | |
| dev_err(dev, "Couldn't allocate IRQ domain\n"); | |
| return -ENXIO; | |
| } | |
| if (of_property_read_bool(np, "wakeup-source")) { | |
| priv->parent_wake_irq = platform_get_irq(pdev, 1); | |
| if (priv->parent_wake_irq < 0) { | |
| priv->parent_wake_irq = 0; | |
| dev_warn(dev, | |
| "Couldn't get wake IRQ - GPIOs will not be able to wake from sleep"); | |
| } else { | |
| /* | |
| * Set wakeup capability so we can process boot-time | |
| * "wakeups" (e.g., from S5 cold boot) | |
| */ | |
| device_set_wakeup_capable(dev, true); | |
| device_wakeup_enable(dev); | |
| err = devm_request_irq(dev, priv->parent_wake_irq, | |
| brcmstb_gpio_wake_irq_handler, | |
| IRQF_SHARED, | |
| "brcmstb-gpio-wake", priv); | |
| if (err < 0) { | |
| dev_err(dev, "Couldn't request wake IRQ"); | |
| goto out_free_domain; | |
| } | |
| } | |
| } | |
| priv->irq_chip.name = dev_name(dev); | |
| priv->irq_chip.irq_disable = brcmstb_gpio_irq_mask; | |
| priv->irq_chip.irq_mask = brcmstb_gpio_irq_mask; | |
| priv->irq_chip.irq_unmask = brcmstb_gpio_irq_unmask; | |
| priv->irq_chip.irq_ack = brcmstb_gpio_irq_ack; | |
| priv->irq_chip.irq_set_type = brcmstb_gpio_irq_set_type; | |
| if (priv->parent_wake_irq) | |
| priv->irq_chip.irq_set_wake = brcmstb_gpio_irq_set_wake; | |
| irq_set_chained_handler_and_data(priv->parent_irq, | |
| brcmstb_gpio_irq_handler, priv); | |
| irq_set_status_flags(priv->parent_irq, IRQ_DISABLE_UNLAZY); | |
| return 0; | |
| out_free_domain: | |
| irq_domain_remove(priv->irq_domain); | |
| return err; | |
| } | |
| static void brcmstb_gpio_bank_save(struct brcmstb_gpio_priv *priv, | |
| struct brcmstb_gpio_bank *bank) | |
| { | |
| struct gpio_chip *gc = &bank->gc; | |
| unsigned int i; | |
| for (i = 0; i < GIO_REG_STAT; i++) | |
| bank->saved_regs[i] = gc->read_reg(priv->reg_base + | |
| GIO_BANK_OFF(bank->id, i)); | |
| } | |
| static void brcmstb_gpio_quiesce(struct device *dev, bool save) | |
| { | |
| struct brcmstb_gpio_priv *priv = dev_get_drvdata(dev); | |
| struct brcmstb_gpio_bank *bank; | |
| struct gpio_chip *gc; | |
| u32 imask; | |
| /* disable non-wake interrupt */ | |
| if (priv->parent_irq >= 0) | |
| disable_irq(priv->parent_irq); | |
| list_for_each_entry(bank, &priv->bank_list, node) { | |
| gc = &bank->gc; | |
| if (save) | |
| brcmstb_gpio_bank_save(priv, bank); | |
| /* Unmask GPIOs which have been flagged as wake-up sources */ | |
| if (priv->parent_wake_irq) | |
| imask = bank->wake_active; | |
| else | |
| imask = 0; | |
| gc->write_reg(priv->reg_base + GIO_MASK(bank->id), | |
| imask); | |
| } | |
| } | |
| static void brcmstb_gpio_shutdown(struct platform_device *pdev) | |
| { | |
| /* Enable GPIO for S5 cold boot */ | |
| brcmstb_gpio_quiesce(&pdev->dev, false); | |
| } | |
| #ifdef CONFIG_PM_SLEEP | |
| static void brcmstb_gpio_bank_restore(struct brcmstb_gpio_priv *priv, | |
| struct brcmstb_gpio_bank *bank) | |
| { | |
| struct gpio_chip *gc = &bank->gc; | |
| unsigned int i; | |
| for (i = 0; i < GIO_REG_STAT; i++) | |
| gc->write_reg(priv->reg_base + GIO_BANK_OFF(bank->id, i), | |
| bank->saved_regs[i]); | |
| } | |
| static int brcmstb_gpio_suspend(struct device *dev) | |
| { | |
| brcmstb_gpio_quiesce(dev, true); | |
| return 0; | |
| } | |
| static int brcmstb_gpio_resume(struct device *dev) | |
| { | |
| struct brcmstb_gpio_priv *priv = dev_get_drvdata(dev); | |
| struct brcmstb_gpio_bank *bank; | |
| bool need_wakeup_event = false; | |
| list_for_each_entry(bank, &priv->bank_list, node) { | |
| need_wakeup_event |= !!__brcmstb_gpio_get_active_irqs(bank); | |
| brcmstb_gpio_bank_restore(priv, bank); | |
| } | |
| if (priv->parent_wake_irq && need_wakeup_event) | |
| pm_wakeup_event(dev, 0); | |
| /* enable non-wake interrupt */ | |
| if (priv->parent_irq >= 0) | |
| enable_irq(priv->parent_irq); | |
| return 0; | |
| } | |
| #else | |
| #define brcmstb_gpio_suspend NULL | |
| #define brcmstb_gpio_resume NULL | |
| #endif /* CONFIG_PM_SLEEP */ | |
| static const struct dev_pm_ops brcmstb_gpio_pm_ops = { | |
| .suspend_noirq = brcmstb_gpio_suspend, | |
| .resume_noirq = brcmstb_gpio_resume, | |
| }; | |
| static void brcmstb_gpio_set_names(struct device *dev, | |
| struct brcmstb_gpio_bank *bank) | |
| { | |
| struct device_node *np = dev->of_node; | |
| const char **names; | |
| int nstrings, base; | |
| unsigned int i; | |
| base = bank->id * MAX_GPIO_PER_BANK; | |
| nstrings = of_property_count_strings(np, "gpio-line-names"); | |
| if (nstrings <= base) | |
| /* Line names not present */ | |
| return; | |
| names = devm_kcalloc(dev, MAX_GPIO_PER_BANK, sizeof(*names), | |
| GFP_KERNEL); | |
| if (!names) | |
| return; | |
| /* | |
| * Make sure to not index beyond the end of the number of descriptors | |
| * of the GPIO device. | |
| */ | |
| for (i = 0; i < bank->width; i++) { | |
| const char *name; | |
| int ret; | |
| ret = of_property_read_string_index(np, "gpio-line-names", | |
| base + i, &name); | |
| if (ret) { | |
| if (ret != -ENODATA) | |
| dev_err(dev, "unable to name line %d: %d\n", | |
| base + i, ret); | |
| break; | |
| } | |
| if (*name) | |
| names[i] = name; | |
| } | |
| bank->gc.names = names; | |
| } | |
| static int brcmstb_gpio_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct device_node *np = dev->of_node; | |
| void __iomem *reg_base; | |
| struct brcmstb_gpio_priv *priv; | |
| struct resource *res; | |
| struct property *prop; | |
| const __be32 *p; | |
| u32 bank_width; | |
| int num_banks = 0; | |
| int err; | |
| static int gpio_base; | |
| unsigned long flags = 0; | |
| bool need_wakeup_event = false; | |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); | |
| if (!priv) | |
| return -ENOMEM; | |
| platform_set_drvdata(pdev, priv); | |
| INIT_LIST_HEAD(&priv->bank_list); | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| reg_base = devm_ioremap_resource(dev, res); | |
| if (IS_ERR(reg_base)) | |
| return PTR_ERR(reg_base); | |
| priv->gpio_base = gpio_base; | |
| priv->reg_base = reg_base; | |
| priv->pdev = pdev; | |
| if (of_property_read_bool(np, "interrupt-controller")) { | |
| priv->parent_irq = platform_get_irq(pdev, 0); | |
| if (priv->parent_irq <= 0) | |
| return -ENOENT; | |
| } else { | |
| priv->parent_irq = -ENOENT; | |
| } | |
| if (brcmstb_gpio_sanity_check_banks(dev, np, res)) | |
| return -EINVAL; | |
| /* | |
| * MIPS endianness is configured by boot strap, which also reverses all | |
| * bus endianness (i.e., big-endian CPU + big endian bus ==> native | |
| * endian I/O). | |
| * | |
| * Other architectures (e.g., ARM) either do not support big endian, or | |
| * else leave I/O in little endian mode. | |
| */ | |
| #if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN) | |
| flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER; | |
| #endif | |
| of_property_for_each_u32(np, "brcm,gpio-bank-widths", prop, p, | |
| bank_width) { | |
| struct brcmstb_gpio_bank *bank; | |
| struct gpio_chip *gc; | |
| /* | |
| * If bank_width is 0, then there is an empty bank in the | |
| * register block. Special handling for this case. | |
| */ | |
| if (bank_width == 0) { | |
| dev_dbg(dev, "Width 0 found: Empty bank @ %d\n", | |
| num_banks); | |
| num_banks++; | |
| gpio_base += MAX_GPIO_PER_BANK; | |
| continue; | |
| } | |
| bank = devm_kzalloc(dev, sizeof(*bank), GFP_KERNEL); | |
| if (!bank) { | |
| err = -ENOMEM; | |
| goto fail; | |
| } | |
| bank->parent_priv = priv; | |
| bank->id = num_banks; | |
| if (bank_width <= 0 || bank_width > MAX_GPIO_PER_BANK) { | |
| dev_err(dev, "Invalid bank width %d\n", bank_width); | |
| err = -EINVAL; | |
| goto fail; | |
| } else { | |
| bank->width = bank_width; | |
| } | |
| /* | |
| * Regs are 4 bytes wide, have data reg, no set/clear regs, | |
| * and direction bits have 0 = output and 1 = input | |
| */ | |
| gc = &bank->gc; | |
| err = bgpio_init(gc, dev, 4, | |
| reg_base + GIO_DATA(bank->id), | |
| NULL, NULL, NULL, | |
| reg_base + GIO_IODIR(bank->id), flags); | |
| if (err) { | |
| dev_err(dev, "bgpio_init() failed\n"); | |
| goto fail; | |
| } | |
| gc->of_node = np; | |
| gc->owner = THIS_MODULE; | |
| gc->label = devm_kasprintf(dev, GFP_KERNEL, "%pOF", dev->of_node); | |
| if (!gc->label) { | |
| err = -ENOMEM; | |
| goto fail; | |
| } | |
| gc->base = gpio_base; | |
| gc->of_gpio_n_cells = 2; | |
| gc->of_xlate = brcmstb_gpio_of_xlate; | |
| /* not all ngpio lines are valid, will use bank width later */ | |
| gc->ngpio = MAX_GPIO_PER_BANK; | |
| if (priv->parent_irq > 0) | |
| gc->to_irq = brcmstb_gpio_to_irq; | |
| /* | |
| * Mask all interrupts by default, since wakeup interrupts may | |
| * be retained from S5 cold boot | |
| */ | |
| need_wakeup_event |= !!__brcmstb_gpio_get_active_irqs(bank); | |
| gc->write_reg(reg_base + GIO_MASK(bank->id), 0); | |
| brcmstb_gpio_set_names(dev, bank); | |
| err = gpiochip_add_data(gc, bank); | |
| if (err) { | |
| dev_err(dev, "Could not add gpiochip for bank %d\n", | |
| bank->id); | |
| goto fail; | |
| } | |
| gpio_base += gc->ngpio; | |
| dev_dbg(dev, "bank=%d, base=%d, ngpio=%d, width=%d\n", bank->id, | |
| gc->base, gc->ngpio, bank->width); | |
| /* Everything looks good, so add bank to list */ | |
| list_add(&bank->node, &priv->bank_list); | |
| num_banks++; | |
| } | |
| priv->num_gpios = gpio_base - priv->gpio_base; | |
| if (priv->parent_irq > 0) { | |
| err = brcmstb_gpio_irq_setup(pdev, priv); | |
| if (err) | |
| goto fail; | |
| } | |
| if (priv->parent_wake_irq && need_wakeup_event) | |
| pm_wakeup_event(dev, 0); | |
| return 0; | |
| fail: | |
| (void) brcmstb_gpio_remove(pdev); | |
| return err; | |
| } | |
| static const struct of_device_id brcmstb_gpio_of_match[] = { | |
| { .compatible = "brcm,brcmstb-gpio" }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, brcmstb_gpio_of_match); | |
| static struct platform_driver brcmstb_gpio_driver = { | |
| .driver = { | |
| .name = "brcmstb-gpio", | |
| .of_match_table = brcmstb_gpio_of_match, | |
| .pm = &brcmstb_gpio_pm_ops, | |
| }, | |
| .probe = brcmstb_gpio_probe, | |
| .remove = brcmstb_gpio_remove, | |
| .shutdown = brcmstb_gpio_shutdown, | |
| }; | |
| module_platform_driver(brcmstb_gpio_driver); | |
| MODULE_AUTHOR("Gregory Fong"); | |
| MODULE_DESCRIPTION("Driver for Broadcom BRCMSTB SoC UPG GPIO"); | |
| MODULE_LICENSE("GPL v2"); |