| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Regulator driver for PWM Regulators | |
| * | |
| * Copyright (C) 2014 - STMicroelectronics Inc. | |
| * | |
| * Author: Lee Jones <lee.jones@linaro.org> | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/err.h> | |
| #include <linux/regulator/driver.h> | |
| #include <linux/regulator/machine.h> | |
| #include <linux/regulator/of_regulator.h> | |
| #include <linux/of.h> | |
| #include <linux/of_device.h> | |
| #include <linux/pwm.h> | |
| #include <linux/gpio/consumer.h> | |
| struct pwm_continuous_reg_data { | |
| unsigned int min_uV_dutycycle; | |
| unsigned int max_uV_dutycycle; | |
| unsigned int dutycycle_unit; | |
| }; | |
| struct pwm_regulator_data { | |
| /* Shared */ | |
| struct pwm_device *pwm; | |
| /* Voltage table */ | |
| struct pwm_voltages *duty_cycle_table; | |
| /* Continuous mode info */ | |
| struct pwm_continuous_reg_data continuous; | |
| /* regulator descriptor */ | |
| struct regulator_desc desc; | |
| int state; | |
| /* Enable GPIO */ | |
| struct gpio_desc *enb_gpio; | |
| }; | |
| struct pwm_voltages { | |
| unsigned int uV; | |
| unsigned int dutycycle; | |
| }; | |
| /* | |
| * Voltage table call-backs | |
| */ | |
| static void pwm_regulator_init_state(struct regulator_dev *rdev) | |
| { | |
| struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev); | |
| struct pwm_state pwm_state; | |
| unsigned int dutycycle; | |
| int i; | |
| pwm_get_state(drvdata->pwm, &pwm_state); | |
| dutycycle = pwm_get_relative_duty_cycle(&pwm_state, 100); | |
| for (i = 0; i < rdev->desc->n_voltages; i++) { | |
| if (dutycycle == drvdata->duty_cycle_table[i].dutycycle) { | |
| drvdata->state = i; | |
| return; | |
| } | |
| } | |
| } | |
| static int pwm_regulator_get_voltage_sel(struct regulator_dev *rdev) | |
| { | |
| struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev); | |
| if (drvdata->state < 0) | |
| pwm_regulator_init_state(rdev); | |
| return drvdata->state; | |
| } | |
| static int pwm_regulator_set_voltage_sel(struct regulator_dev *rdev, | |
| unsigned selector) | |
| { | |
| struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev); | |
| struct pwm_state pstate; | |
| int ret; | |
| pwm_init_state(drvdata->pwm, &pstate); | |
| pwm_set_relative_duty_cycle(&pstate, | |
| drvdata->duty_cycle_table[selector].dutycycle, 100); | |
| ret = pwm_apply_state(drvdata->pwm, &pstate); | |
| if (ret) { | |
| dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret); | |
| return ret; | |
| } | |
| drvdata->state = selector; | |
| return 0; | |
| } | |
| static int pwm_regulator_list_voltage(struct regulator_dev *rdev, | |
| unsigned selector) | |
| { | |
| struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev); | |
| if (selector >= rdev->desc->n_voltages) | |
| return -EINVAL; | |
| return drvdata->duty_cycle_table[selector].uV; | |
| } | |
| static int pwm_regulator_enable(struct regulator_dev *dev) | |
| { | |
| struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev); | |
| gpiod_set_value_cansleep(drvdata->enb_gpio, 1); | |
| return pwm_enable(drvdata->pwm); | |
| } | |
| static int pwm_regulator_disable(struct regulator_dev *dev) | |
| { | |
| struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev); | |
| pwm_disable(drvdata->pwm); | |
| gpiod_set_value_cansleep(drvdata->enb_gpio, 0); | |
| return 0; | |
| } | |
| static int pwm_regulator_is_enabled(struct regulator_dev *dev) | |
| { | |
| struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev); | |
| if (drvdata->enb_gpio && !gpiod_get_value_cansleep(drvdata->enb_gpio)) | |
| return false; | |
| return pwm_is_enabled(drvdata->pwm); | |
| } | |
| static int pwm_regulator_get_voltage(struct regulator_dev *rdev) | |
| { | |
| struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev); | |
| unsigned int min_uV_duty = drvdata->continuous.min_uV_dutycycle; | |
| unsigned int max_uV_duty = drvdata->continuous.max_uV_dutycycle; | |
| unsigned int duty_unit = drvdata->continuous.dutycycle_unit; | |
| int min_uV = rdev->constraints->min_uV; | |
| int max_uV = rdev->constraints->max_uV; | |
| int diff_uV = max_uV - min_uV; | |
| struct pwm_state pstate; | |
| unsigned int diff_duty; | |
| unsigned int voltage; | |
| pwm_get_state(drvdata->pwm, &pstate); | |
| voltage = pwm_get_relative_duty_cycle(&pstate, duty_unit); | |
| /* | |
| * The dutycycle for min_uV might be greater than the one for max_uV. | |
| * This is happening when the user needs an inversed polarity, but the | |
| * PWM device does not support inversing it in hardware. | |
| */ | |
| if (max_uV_duty < min_uV_duty) { | |
| voltage = min_uV_duty - voltage; | |
| diff_duty = min_uV_duty - max_uV_duty; | |
| } else { | |
| voltage = voltage - min_uV_duty; | |
| diff_duty = max_uV_duty - min_uV_duty; | |
| } | |
| voltage = DIV_ROUND_CLOSEST_ULL((u64)voltage * diff_uV, diff_duty); | |
| return voltage + min_uV; | |
| } | |
| static int pwm_regulator_set_voltage(struct regulator_dev *rdev, | |
| int req_min_uV, int req_max_uV, | |
| unsigned int *selector) | |
| { | |
| struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev); | |
| unsigned int min_uV_duty = drvdata->continuous.min_uV_dutycycle; | |
| unsigned int max_uV_duty = drvdata->continuous.max_uV_dutycycle; | |
| unsigned int duty_unit = drvdata->continuous.dutycycle_unit; | |
| int min_uV = rdev->constraints->min_uV; | |
| int max_uV = rdev->constraints->max_uV; | |
| int diff_uV = max_uV - min_uV; | |
| struct pwm_state pstate; | |
| unsigned int diff_duty; | |
| unsigned int dutycycle; | |
| int ret; | |
| pwm_init_state(drvdata->pwm, &pstate); | |
| /* | |
| * The dutycycle for min_uV might be greater than the one for max_uV. | |
| * This is happening when the user needs an inversed polarity, but the | |
| * PWM device does not support inversing it in hardware. | |
| */ | |
| if (max_uV_duty < min_uV_duty) | |
| diff_duty = min_uV_duty - max_uV_duty; | |
| else | |
| diff_duty = max_uV_duty - min_uV_duty; | |
| dutycycle = DIV_ROUND_CLOSEST_ULL((u64)(req_min_uV - min_uV) * | |
| diff_duty, | |
| diff_uV); | |
| if (max_uV_duty < min_uV_duty) | |
| dutycycle = min_uV_duty - dutycycle; | |
| else | |
| dutycycle = min_uV_duty + dutycycle; | |
| pwm_set_relative_duty_cycle(&pstate, dutycycle, duty_unit); | |
| ret = pwm_apply_state(drvdata->pwm, &pstate); | |
| if (ret) { | |
| dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static const struct regulator_ops pwm_regulator_voltage_table_ops = { | |
| .set_voltage_sel = pwm_regulator_set_voltage_sel, | |
| .get_voltage_sel = pwm_regulator_get_voltage_sel, | |
| .list_voltage = pwm_regulator_list_voltage, | |
| .map_voltage = regulator_map_voltage_iterate, | |
| .enable = pwm_regulator_enable, | |
| .disable = pwm_regulator_disable, | |
| .is_enabled = pwm_regulator_is_enabled, | |
| }; | |
| static const struct regulator_ops pwm_regulator_voltage_continuous_ops = { | |
| .get_voltage = pwm_regulator_get_voltage, | |
| .set_voltage = pwm_regulator_set_voltage, | |
| .enable = pwm_regulator_enable, | |
| .disable = pwm_regulator_disable, | |
| .is_enabled = pwm_regulator_is_enabled, | |
| }; | |
| static const struct regulator_desc pwm_regulator_desc = { | |
| .name = "pwm-regulator", | |
| .type = REGULATOR_VOLTAGE, | |
| .owner = THIS_MODULE, | |
| .supply_name = "pwm", | |
| }; | |
| static int pwm_regulator_init_table(struct platform_device *pdev, | |
| struct pwm_regulator_data *drvdata) | |
| { | |
| struct device_node *np = pdev->dev.of_node; | |
| struct pwm_voltages *duty_cycle_table; | |
| unsigned int length = 0; | |
| int ret; | |
| of_find_property(np, "voltage-table", &length); | |
| if ((length < sizeof(*duty_cycle_table)) || | |
| (length % sizeof(*duty_cycle_table))) { | |
| dev_err(&pdev->dev, "voltage-table length(%d) is invalid\n", | |
| length); | |
| return -EINVAL; | |
| } | |
| duty_cycle_table = devm_kzalloc(&pdev->dev, length, GFP_KERNEL); | |
| if (!duty_cycle_table) | |
| return -ENOMEM; | |
| ret = of_property_read_u32_array(np, "voltage-table", | |
| (u32 *)duty_cycle_table, | |
| length / sizeof(u32)); | |
| if (ret) { | |
| dev_err(&pdev->dev, "Failed to read voltage-table: %d\n", ret); | |
| return ret; | |
| } | |
| drvdata->state = -ENOTRECOVERABLE; | |
| drvdata->duty_cycle_table = duty_cycle_table; | |
| drvdata->desc.ops = &pwm_regulator_voltage_table_ops; | |
| drvdata->desc.n_voltages = length / sizeof(*duty_cycle_table); | |
| return 0; | |
| } | |
| static int pwm_regulator_init_continuous(struct platform_device *pdev, | |
| struct pwm_regulator_data *drvdata) | |
| { | |
| u32 dutycycle_range[2] = { 0, 100 }; | |
| u32 dutycycle_unit = 100; | |
| drvdata->desc.ops = &pwm_regulator_voltage_continuous_ops; | |
| drvdata->desc.continuous_voltage_range = true; | |
| of_property_read_u32_array(pdev->dev.of_node, | |
| "pwm-dutycycle-range", | |
| dutycycle_range, 2); | |
| of_property_read_u32(pdev->dev.of_node, "pwm-dutycycle-unit", | |
| &dutycycle_unit); | |
| if (dutycycle_range[0] > dutycycle_unit || | |
| dutycycle_range[1] > dutycycle_unit) | |
| return -EINVAL; | |
| drvdata->continuous.dutycycle_unit = dutycycle_unit; | |
| drvdata->continuous.min_uV_dutycycle = dutycycle_range[0]; | |
| drvdata->continuous.max_uV_dutycycle = dutycycle_range[1]; | |
| return 0; | |
| } | |
| static int pwm_regulator_probe(struct platform_device *pdev) | |
| { | |
| const struct regulator_init_data *init_data; | |
| struct pwm_regulator_data *drvdata; | |
| struct regulator_dev *regulator; | |
| struct regulator_config config = { }; | |
| struct device_node *np = pdev->dev.of_node; | |
| enum gpiod_flags gpio_flags; | |
| int ret; | |
| if (!np) { | |
| dev_err(&pdev->dev, "Device Tree node missing\n"); | |
| return -EINVAL; | |
| } | |
| drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL); | |
| if (!drvdata) | |
| return -ENOMEM; | |
| memcpy(&drvdata->desc, &pwm_regulator_desc, sizeof(drvdata->desc)); | |
| if (of_find_property(np, "voltage-table", NULL)) | |
| ret = pwm_regulator_init_table(pdev, drvdata); | |
| else | |
| ret = pwm_regulator_init_continuous(pdev, drvdata); | |
| if (ret) | |
| return ret; | |
| init_data = of_get_regulator_init_data(&pdev->dev, np, | |
| &drvdata->desc); | |
| if (!init_data) | |
| return -ENOMEM; | |
| config.of_node = np; | |
| config.dev = &pdev->dev; | |
| config.driver_data = drvdata; | |
| config.init_data = init_data; | |
| drvdata->pwm = devm_pwm_get(&pdev->dev, NULL); | |
| if (IS_ERR(drvdata->pwm)) | |
| return dev_err_probe(&pdev->dev, PTR_ERR(drvdata->pwm), | |
| "Failed to get PWM\n"); | |
| if (init_data->constraints.boot_on || init_data->constraints.always_on) | |
| gpio_flags = GPIOD_OUT_HIGH; | |
| else | |
| gpio_flags = GPIOD_OUT_LOW; | |
| drvdata->enb_gpio = devm_gpiod_get_optional(&pdev->dev, "enable", | |
| gpio_flags); | |
| if (IS_ERR(drvdata->enb_gpio)) { | |
| ret = PTR_ERR(drvdata->enb_gpio); | |
| dev_err(&pdev->dev, "Failed to get enable GPIO: %d\n", ret); | |
| return ret; | |
| } | |
| ret = pwm_adjust_config(drvdata->pwm); | |
| if (ret) | |
| return ret; | |
| regulator = devm_regulator_register(&pdev->dev, | |
| &drvdata->desc, &config); | |
| if (IS_ERR(regulator)) { | |
| ret = PTR_ERR(regulator); | |
| dev_err(&pdev->dev, "Failed to register regulator %s: %d\n", | |
| drvdata->desc.name, ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static const struct of_device_id __maybe_unused pwm_of_match[] = { | |
| { .compatible = "pwm-regulator" }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, pwm_of_match); | |
| static struct platform_driver pwm_regulator_driver = { | |
| .driver = { | |
| .name = "pwm-regulator", | |
| .of_match_table = of_match_ptr(pwm_of_match), | |
| }, | |
| .probe = pwm_regulator_probe, | |
| }; | |
| module_platform_driver(pwm_regulator_driver); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Lee Jones <lee.jones@linaro.org>"); | |
| MODULE_DESCRIPTION("PWM Regulator Driver"); | |
| MODULE_ALIAS("platform:pwm-regulator"); |