| /* generic HDLC line discipline for Linux | |
| * | |
| * Written by Paul Fulghum paulkf@microgate.com | |
| * for Microgate Corporation | |
| * | |
| * Microgate and SyncLink are registered trademarks of Microgate Corporation | |
| * | |
| * Adapted from ppp.c, written by Michael Callahan <callahan@maths.ox.ac.uk>, | |
| * Al Longyear <longyear@netcom.com>, | |
| * Paul Mackerras <Paul.Mackerras@cs.anu.edu.au> | |
| * | |
| * Original release 01/11/99 | |
| * | |
| * This code is released under the GNU General Public License (GPL) | |
| * | |
| * This module implements the tty line discipline N_HDLC for use with | |
| * tty device drivers that support bit-synchronous HDLC communications. | |
| * | |
| * All HDLC data is frame oriented which means: | |
| * | |
| * 1. tty write calls represent one complete transmit frame of data | |
| * The device driver should accept the complete frame or none of | |
| * the frame (busy) in the write method. Each write call should have | |
| * a byte count in the range of 2-65535 bytes (2 is min HDLC frame | |
| * with 1 addr byte and 1 ctrl byte). The max byte count of 65535 | |
| * should include any crc bytes required. For example, when using | |
| * CCITT CRC32, 4 crc bytes are required, so the maximum size frame | |
| * the application may transmit is limited to 65531 bytes. For CCITT | |
| * CRC16, the maximum application frame size would be 65533. | |
| * | |
| * | |
| * 2. receive callbacks from the device driver represents | |
| * one received frame. The device driver should bypass | |
| * the tty flip buffer and call the line discipline receive | |
| * callback directly to avoid fragmenting or concatenating | |
| * multiple frames into a single receive callback. | |
| * | |
| * The HDLC line discipline queues the receive frames in separate | |
| * buffers so complete receive frames can be returned by the | |
| * tty read calls. | |
| * | |
| * 3. tty read calls returns an entire frame of data or nothing. | |
| * | |
| * 4. all send and receive data is considered raw. No processing | |
| * or translation is performed by the line discipline, regardless | |
| * of the tty flags | |
| * | |
| * 5. When line discipline is queried for the amount of receive | |
| * data available (FIOC), 0 is returned if no data available, | |
| * otherwise the count of the next available frame is returned. | |
| * (instead of the sum of all received frame counts). | |
| * | |
| * These conventions allow the standard tty programming interface | |
| * to be used for synchronous HDLC applications when used with | |
| * this line discipline (or another line discipline that is frame | |
| * oriented such as N_PPP). | |
| * | |
| * The SyncLink driver (synclink.c) implements both asynchronous | |
| * (using standard line discipline N_TTY) and synchronous HDLC | |
| * (using N_HDLC) communications, with the latter using the above | |
| * conventions. | |
| * | |
| * This implementation is very basic and does not maintain | |
| * any statistics. The main point is to enforce the raw data | |
| * and frame orientation of HDLC communications. | |
| * | |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED | |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES | |
| * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
| * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, | |
| * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
| * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED | |
| * OF THE POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| #define HDLC_MAGIC 0x239e | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/sched.h> | |
| #include <linux/types.h> | |
| #include <linux/fcntl.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/ptrace.h> | |
| #undef VERSION | |
| #define VERSION(major,minor,patch) (((((major)<<8)+(minor))<<8)+(patch)) | |
| #include <linux/poll.h> | |
| #include <linux/in.h> | |
| #include <linux/ioctl.h> | |
| #include <linux/slab.h> | |
| #include <linux/tty.h> | |
| #include <linux/errno.h> | |
| #include <linux/string.h> /* used in new tty drivers */ | |
| #include <linux/signal.h> /* used in new tty drivers */ | |
| #include <linux/if.h> | |
| #include <linux/bitops.h> | |
| #include <asm/termios.h> | |
| #include <linux/uaccess.h> | |
| /* | |
| * Buffers for individual HDLC frames | |
| */ | |
| #define MAX_HDLC_FRAME_SIZE 65535 | |
| #define DEFAULT_RX_BUF_COUNT 10 | |
| #define MAX_RX_BUF_COUNT 60 | |
| #define DEFAULT_TX_BUF_COUNT 3 | |
| struct n_hdlc_buf { | |
| struct list_head list_item; | |
| int count; | |
| char buf[1]; | |
| }; | |
| #define N_HDLC_BUF_SIZE (sizeof(struct n_hdlc_buf) + maxframe) | |
| struct n_hdlc_buf_list { | |
| struct list_head list; | |
| int count; | |
| spinlock_t spinlock; | |
| }; | |
| /** | |
| * struct n_hdlc - per device instance data structure | |
| * @magic - magic value for structure | |
| * @flags - miscellaneous control flags | |
| * @tty - ptr to TTY structure | |
| * @backup_tty - TTY to use if tty gets closed | |
| * @tbusy - reentrancy flag for tx wakeup code | |
| * @woke_up - FIXME: describe this field | |
| * @tx_buf_list - list of pending transmit frame buffers | |
| * @rx_buf_list - list of received frame buffers | |
| * @tx_free_buf_list - list unused transmit frame buffers | |
| * @rx_free_buf_list - list unused received frame buffers | |
| */ | |
| struct n_hdlc { | |
| int magic; | |
| __u32 flags; | |
| struct tty_struct *tty; | |
| struct tty_struct *backup_tty; | |
| int tbusy; | |
| int woke_up; | |
| struct n_hdlc_buf_list tx_buf_list; | |
| struct n_hdlc_buf_list rx_buf_list; | |
| struct n_hdlc_buf_list tx_free_buf_list; | |
| struct n_hdlc_buf_list rx_free_buf_list; | |
| }; | |
| /* | |
| * HDLC buffer list manipulation functions | |
| */ | |
| static void n_hdlc_buf_return(struct n_hdlc_buf_list *buf_list, | |
| struct n_hdlc_buf *buf); | |
| static void n_hdlc_buf_put(struct n_hdlc_buf_list *list, | |
| struct n_hdlc_buf *buf); | |
| static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *list); | |
| /* Local functions */ | |
| static struct n_hdlc *n_hdlc_alloc (void); | |
| /* debug level can be set by insmod for debugging purposes */ | |
| #define DEBUG_LEVEL_INFO 1 | |
| static int debuglevel; | |
| /* max frame size for memory allocations */ | |
| static int maxframe = 4096; | |
| /* TTY callbacks */ | |
| static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, | |
| __u8 __user *buf, size_t nr); | |
| static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, | |
| const unsigned char *buf, size_t nr); | |
| static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file, | |
| unsigned int cmd, unsigned long arg); | |
| static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp, | |
| poll_table *wait); | |
| static int n_hdlc_tty_open(struct tty_struct *tty); | |
| static void n_hdlc_tty_close(struct tty_struct *tty); | |
| static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *cp, | |
| char *fp, int count); | |
| static void n_hdlc_tty_wakeup(struct tty_struct *tty); | |
| #define bset(p,b) ((p)[(b) >> 5] |= (1 << ((b) & 0x1f))) | |
| #define tty2n_hdlc(tty) ((struct n_hdlc *) ((tty)->disc_data)) | |
| #define n_hdlc2tty(n_hdlc) ((n_hdlc)->tty) | |
| static void flush_rx_queue(struct tty_struct *tty) | |
| { | |
| struct n_hdlc *n_hdlc = tty2n_hdlc(tty); | |
| struct n_hdlc_buf *buf; | |
| while ((buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list))) | |
| n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, buf); | |
| } | |
| static void flush_tx_queue(struct tty_struct *tty) | |
| { | |
| struct n_hdlc *n_hdlc = tty2n_hdlc(tty); | |
| struct n_hdlc_buf *buf; | |
| while ((buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list))) | |
| n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, buf); | |
| } | |
| static struct tty_ldisc_ops n_hdlc_ldisc = { | |
| .owner = THIS_MODULE, | |
| .magic = TTY_LDISC_MAGIC, | |
| .name = "hdlc", | |
| .open = n_hdlc_tty_open, | |
| .close = n_hdlc_tty_close, | |
| .read = n_hdlc_tty_read, | |
| .write = n_hdlc_tty_write, | |
| .ioctl = n_hdlc_tty_ioctl, | |
| .poll = n_hdlc_tty_poll, | |
| .receive_buf = n_hdlc_tty_receive, | |
| .write_wakeup = n_hdlc_tty_wakeup, | |
| .flush_buffer = flush_rx_queue, | |
| }; | |
| /** | |
| * n_hdlc_release - release an n_hdlc per device line discipline info structure | |
| * @n_hdlc - per device line discipline info structure | |
| */ | |
| static void n_hdlc_release(struct n_hdlc *n_hdlc) | |
| { | |
| struct tty_struct *tty = n_hdlc2tty (n_hdlc); | |
| struct n_hdlc_buf *buf; | |
| if (debuglevel >= DEBUG_LEVEL_INFO) | |
| printk("%s(%d)n_hdlc_release() called\n",__FILE__,__LINE__); | |
| /* Ensure that the n_hdlcd process is not hanging on select()/poll() */ | |
| wake_up_interruptible (&tty->read_wait); | |
| wake_up_interruptible (&tty->write_wait); | |
| if (tty->disc_data == n_hdlc) | |
| tty->disc_data = NULL; /* Break the tty->n_hdlc link */ | |
| /* Release transmit and receive buffers */ | |
| for(;;) { | |
| buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list); | |
| if (buf) { | |
| kfree(buf); | |
| } else | |
| break; | |
| } | |
| for(;;) { | |
| buf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list); | |
| if (buf) { | |
| kfree(buf); | |
| } else | |
| break; | |
| } | |
| for(;;) { | |
| buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list); | |
| if (buf) { | |
| kfree(buf); | |
| } else | |
| break; | |
| } | |
| for(;;) { | |
| buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list); | |
| if (buf) { | |
| kfree(buf); | |
| } else | |
| break; | |
| } | |
| kfree(n_hdlc); | |
| } /* end of n_hdlc_release() */ | |
| /** | |
| * n_hdlc_tty_close - line discipline close | |
| * @tty - pointer to tty info structure | |
| * | |
| * Called when the line discipline is changed to something | |
| * else, the tty is closed, or the tty detects a hangup. | |
| */ | |
| static void n_hdlc_tty_close(struct tty_struct *tty) | |
| { | |
| struct n_hdlc *n_hdlc = tty2n_hdlc (tty); | |
| if (debuglevel >= DEBUG_LEVEL_INFO) | |
| printk("%s(%d)n_hdlc_tty_close() called\n",__FILE__,__LINE__); | |
| if (n_hdlc != NULL) { | |
| if (n_hdlc->magic != HDLC_MAGIC) { | |
| printk (KERN_WARNING"n_hdlc: trying to close unopened tty!\n"); | |
| return; | |
| } | |
| #if defined(TTY_NO_WRITE_SPLIT) | |
| clear_bit(TTY_NO_WRITE_SPLIT,&tty->flags); | |
| #endif | |
| tty->disc_data = NULL; | |
| if (tty == n_hdlc->backup_tty) | |
| n_hdlc->backup_tty = NULL; | |
| if (tty != n_hdlc->tty) | |
| return; | |
| if (n_hdlc->backup_tty) { | |
| n_hdlc->tty = n_hdlc->backup_tty; | |
| } else { | |
| n_hdlc_release (n_hdlc); | |
| } | |
| } | |
| if (debuglevel >= DEBUG_LEVEL_INFO) | |
| printk("%s(%d)n_hdlc_tty_close() success\n",__FILE__,__LINE__); | |
| } /* end of n_hdlc_tty_close() */ | |
| /** | |
| * n_hdlc_tty_open - called when line discipline changed to n_hdlc | |
| * @tty - pointer to tty info structure | |
| * | |
| * Returns 0 if success, otherwise error code | |
| */ | |
| static int n_hdlc_tty_open (struct tty_struct *tty) | |
| { | |
| struct n_hdlc *n_hdlc = tty2n_hdlc (tty); | |
| if (debuglevel >= DEBUG_LEVEL_INFO) | |
| printk("%s(%d)n_hdlc_tty_open() called (device=%s)\n", | |
| __FILE__,__LINE__, | |
| tty->name); | |
| /* There should not be an existing table for this slot. */ | |
| if (n_hdlc) { | |
| printk (KERN_ERR"n_hdlc_tty_open:tty already associated!\n" ); | |
| return -EEXIST; | |
| } | |
| n_hdlc = n_hdlc_alloc(); | |
| if (!n_hdlc) { | |
| printk (KERN_ERR "n_hdlc_alloc failed\n"); | |
| return -ENFILE; | |
| } | |
| tty->disc_data = n_hdlc; | |
| n_hdlc->tty = tty; | |
| tty->receive_room = 65536; | |
| #if defined(TTY_NO_WRITE_SPLIT) | |
| /* change tty_io write() to not split large writes into 8K chunks */ | |
| set_bit(TTY_NO_WRITE_SPLIT,&tty->flags); | |
| #endif | |
| /* flush receive data from driver */ | |
| tty_driver_flush_buffer(tty); | |
| if (debuglevel >= DEBUG_LEVEL_INFO) | |
| printk("%s(%d)n_hdlc_tty_open() success\n",__FILE__,__LINE__); | |
| return 0; | |
| } /* end of n_tty_hdlc_open() */ | |
| /** | |
| * n_hdlc_send_frames - send frames on pending send buffer list | |
| * @n_hdlc - pointer to ldisc instance data | |
| * @tty - pointer to tty instance data | |
| * | |
| * Send frames on pending send buffer list until the driver does not accept a | |
| * frame (busy) this function is called after adding a frame to the send buffer | |
| * list and by the tty wakeup callback. | |
| */ | |
| static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty) | |
| { | |
| register int actual; | |
| unsigned long flags; | |
| struct n_hdlc_buf *tbuf; | |
| if (debuglevel >= DEBUG_LEVEL_INFO) | |
| printk("%s(%d)n_hdlc_send_frames() called\n",__FILE__,__LINE__); | |
| check_again: | |
| spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags); | |
| if (n_hdlc->tbusy) { | |
| n_hdlc->woke_up = 1; | |
| spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags); | |
| return; | |
| } | |
| n_hdlc->tbusy = 1; | |
| n_hdlc->woke_up = 0; | |
| spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags); | |
| tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list); | |
| while (tbuf) { | |
| if (debuglevel >= DEBUG_LEVEL_INFO) | |
| printk("%s(%d)sending frame %p, count=%d\n", | |
| __FILE__,__LINE__,tbuf,tbuf->count); | |
| /* Send the next block of data to device */ | |
| set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); | |
| actual = tty->ops->write(tty, tbuf->buf, tbuf->count); | |
| /* rollback was possible and has been done */ | |
| if (actual == -ERESTARTSYS) { | |
| n_hdlc_buf_return(&n_hdlc->tx_buf_list, tbuf); | |
| break; | |
| } | |
| /* if transmit error, throw frame away by */ | |
| /* pretending it was accepted by driver */ | |
| if (actual < 0) | |
| actual = tbuf->count; | |
| if (actual == tbuf->count) { | |
| if (debuglevel >= DEBUG_LEVEL_INFO) | |
| printk("%s(%d)frame %p completed\n", | |
| __FILE__,__LINE__,tbuf); | |
| /* free current transmit buffer */ | |
| n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, tbuf); | |
| /* wait up sleeping writers */ | |
| wake_up_interruptible(&tty->write_wait); | |
| /* get next pending transmit buffer */ | |
| tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list); | |
| } else { | |
| if (debuglevel >= DEBUG_LEVEL_INFO) | |
| printk("%s(%d)frame %p pending\n", | |
| __FILE__,__LINE__,tbuf); | |
| /* | |
| * the buffer was not accepted by driver, | |
| * return it back into tx queue | |
| */ | |
| n_hdlc_buf_return(&n_hdlc->tx_buf_list, tbuf); | |
| break; | |
| } | |
| } | |
| if (!tbuf) | |
| clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); | |
| /* Clear the re-entry flag */ | |
| spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags); | |
| n_hdlc->tbusy = 0; | |
| spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags); | |
| if (n_hdlc->woke_up) | |
| goto check_again; | |
| if (debuglevel >= DEBUG_LEVEL_INFO) | |
| printk("%s(%d)n_hdlc_send_frames() exit\n",__FILE__,__LINE__); | |
| } /* end of n_hdlc_send_frames() */ | |
| /** | |
| * n_hdlc_tty_wakeup - Callback for transmit wakeup | |
| * @tty - pointer to associated tty instance data | |
| * | |
| * Called when low level device driver can accept more send data. | |
| */ | |
| static void n_hdlc_tty_wakeup(struct tty_struct *tty) | |
| { | |
| struct n_hdlc *n_hdlc = tty2n_hdlc(tty); | |
| if (debuglevel >= DEBUG_LEVEL_INFO) | |
| printk("%s(%d)n_hdlc_tty_wakeup() called\n",__FILE__,__LINE__); | |
| if (!n_hdlc) | |
| return; | |
| if (tty != n_hdlc->tty) { | |
| clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); | |
| return; | |
| } | |
| n_hdlc_send_frames (n_hdlc, tty); | |
| } /* end of n_hdlc_tty_wakeup() */ | |
| /** | |
| * n_hdlc_tty_receive - Called by tty driver when receive data is available | |
| * @tty - pointer to tty instance data | |
| * @data - pointer to received data | |
| * @flags - pointer to flags for data | |
| * @count - count of received data in bytes | |
| * | |
| * Called by tty low level driver when receive data is available. Data is | |
| * interpreted as one HDLC frame. | |
| */ | |
| static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data, | |
| char *flags, int count) | |
| { | |
| register struct n_hdlc *n_hdlc = tty2n_hdlc (tty); | |
| register struct n_hdlc_buf *buf; | |
| if (debuglevel >= DEBUG_LEVEL_INFO) | |
| printk("%s(%d)n_hdlc_tty_receive() called count=%d\n", | |
| __FILE__,__LINE__, count); | |
| /* This can happen if stuff comes in on the backup tty */ | |
| if (!n_hdlc || tty != n_hdlc->tty) | |
| return; | |
| /* verify line is using HDLC discipline */ | |
| if (n_hdlc->magic != HDLC_MAGIC) { | |
| printk("%s(%d) line not using HDLC discipline\n", | |
| __FILE__,__LINE__); | |
| return; | |
| } | |
| if ( count>maxframe ) { | |
| if (debuglevel >= DEBUG_LEVEL_INFO) | |
| printk("%s(%d) rx count>maxframesize, data discarded\n", | |
| __FILE__,__LINE__); | |
| return; | |
| } | |
| /* get a free HDLC buffer */ | |
| buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list); | |
| if (!buf) { | |
| /* no buffers in free list, attempt to allocate another rx buffer */ | |
| /* unless the maximum count has been reached */ | |
| if (n_hdlc->rx_buf_list.count < MAX_RX_BUF_COUNT) | |
| buf = kmalloc(N_HDLC_BUF_SIZE, GFP_ATOMIC); | |
| } | |
| if (!buf) { | |
| if (debuglevel >= DEBUG_LEVEL_INFO) | |
| printk("%s(%d) no more rx buffers, data discarded\n", | |
| __FILE__,__LINE__); | |
| return; | |
| } | |
| /* copy received data to HDLC buffer */ | |
| memcpy(buf->buf,data,count); | |
| buf->count=count; | |
| /* add HDLC buffer to list of received frames */ | |
| n_hdlc_buf_put(&n_hdlc->rx_buf_list, buf); | |
| /* wake up any blocked reads and perform async signalling */ | |
| wake_up_interruptible (&tty->read_wait); | |
| if (n_hdlc->tty->fasync != NULL) | |
| kill_fasync (&n_hdlc->tty->fasync, SIGIO, POLL_IN); | |
| } /* end of n_hdlc_tty_receive() */ | |
| /** | |
| * n_hdlc_tty_read - Called to retrieve one frame of data (if available) | |
| * @tty - pointer to tty instance data | |
| * @file - pointer to open file object | |
| * @buf - pointer to returned data buffer | |
| * @nr - size of returned data buffer | |
| * | |
| * Returns the number of bytes returned or error code. | |
| */ | |
| static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, | |
| __u8 __user *buf, size_t nr) | |
| { | |
| struct n_hdlc *n_hdlc = tty2n_hdlc(tty); | |
| int ret = 0; | |
| struct n_hdlc_buf *rbuf; | |
| DECLARE_WAITQUEUE(wait, current); | |
| if (debuglevel >= DEBUG_LEVEL_INFO) | |
| printk("%s(%d)n_hdlc_tty_read() called\n",__FILE__,__LINE__); | |
| /* Validate the pointers */ | |
| if (!n_hdlc) | |
| return -EIO; | |
| /* verify user access to buffer */ | |
| if (!access_ok(VERIFY_WRITE, buf, nr)) { | |
| printk(KERN_WARNING "%s(%d) n_hdlc_tty_read() can't verify user " | |
| "buffer\n", __FILE__, __LINE__); | |
| return -EFAULT; | |
| } | |
| add_wait_queue(&tty->read_wait, &wait); | |
| for (;;) { | |
| if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) { | |
| ret = -EIO; | |
| break; | |
| } | |
| if (tty_hung_up_p(file)) | |
| break; | |
| set_current_state(TASK_INTERRUPTIBLE); | |
| rbuf = n_hdlc_buf_get(&n_hdlc->rx_buf_list); | |
| if (rbuf) { | |
| if (rbuf->count > nr) { | |
| /* too large for caller's buffer */ | |
| ret = -EOVERFLOW; | |
| } else { | |
| if (copy_to_user(buf, rbuf->buf, rbuf->count)) | |
| ret = -EFAULT; | |
| else | |
| ret = rbuf->count; | |
| } | |
| if (n_hdlc->rx_free_buf_list.count > | |
| DEFAULT_RX_BUF_COUNT) | |
| kfree(rbuf); | |
| else | |
| n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, rbuf); | |
| break; | |
| } | |
| /* no data */ | |
| if (file->f_flags & O_NONBLOCK) { | |
| ret = -EAGAIN; | |
| break; | |
| } | |
| schedule(); | |
| if (signal_pending(current)) { | |
| ret = -EINTR; | |
| break; | |
| } | |
| } | |
| remove_wait_queue(&tty->read_wait, &wait); | |
| __set_current_state(TASK_RUNNING); | |
| return ret; | |
| } /* end of n_hdlc_tty_read() */ | |
| /** | |
| * n_hdlc_tty_write - write a single frame of data to device | |
| * @tty - pointer to associated tty device instance data | |
| * @file - pointer to file object data | |
| * @data - pointer to transmit data (one frame) | |
| * @count - size of transmit frame in bytes | |
| * | |
| * Returns the number of bytes written (or error code). | |
| */ | |
| static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, | |
| const unsigned char *data, size_t count) | |
| { | |
| struct n_hdlc *n_hdlc = tty2n_hdlc (tty); | |
| int error = 0; | |
| DECLARE_WAITQUEUE(wait, current); | |
| struct n_hdlc_buf *tbuf; | |
| if (debuglevel >= DEBUG_LEVEL_INFO) | |
| printk("%s(%d)n_hdlc_tty_write() called count=%zd\n", | |
| __FILE__,__LINE__,count); | |
| /* Verify pointers */ | |
| if (!n_hdlc) | |
| return -EIO; | |
| if (n_hdlc->magic != HDLC_MAGIC) | |
| return -EIO; | |
| /* verify frame size */ | |
| if (count > maxframe ) { | |
| if (debuglevel & DEBUG_LEVEL_INFO) | |
| printk (KERN_WARNING | |
| "n_hdlc_tty_write: truncating user packet " | |
| "from %lu to %d\n", (unsigned long) count, | |
| maxframe ); | |
| count = maxframe; | |
| } | |
| add_wait_queue(&tty->write_wait, &wait); | |
| for (;;) { | |
| set_current_state(TASK_INTERRUPTIBLE); | |
| tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list); | |
| if (tbuf) | |
| break; | |
| if (file->f_flags & O_NONBLOCK) { | |
| error = -EAGAIN; | |
| break; | |
| } | |
| schedule(); | |
| n_hdlc = tty2n_hdlc (tty); | |
| if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC || | |
| tty != n_hdlc->tty) { | |
| printk("n_hdlc_tty_write: %p invalid after wait!\n", n_hdlc); | |
| error = -EIO; | |
| break; | |
| } | |
| if (signal_pending(current)) { | |
| error = -EINTR; | |
| break; | |
| } | |
| } | |
| __set_current_state(TASK_RUNNING); | |
| remove_wait_queue(&tty->write_wait, &wait); | |
| if (!error) { | |
| /* Retrieve the user's buffer */ | |
| memcpy(tbuf->buf, data, count); | |
| /* Send the data */ | |
| tbuf->count = error = count; | |
| n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf); | |
| n_hdlc_send_frames(n_hdlc,tty); | |
| } | |
| return error; | |
| } /* end of n_hdlc_tty_write() */ | |
| /** | |
| * n_hdlc_tty_ioctl - process IOCTL system call for the tty device. | |
| * @tty - pointer to tty instance data | |
| * @file - pointer to open file object for device | |
| * @cmd - IOCTL command code | |
| * @arg - argument for IOCTL call (cmd dependent) | |
| * | |
| * Returns command dependent result. | |
| */ | |
| static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file, | |
| unsigned int cmd, unsigned long arg) | |
| { | |
| struct n_hdlc *n_hdlc = tty2n_hdlc (tty); | |
| int error = 0; | |
| int count; | |
| unsigned long flags; | |
| struct n_hdlc_buf *buf = NULL; | |
| if (debuglevel >= DEBUG_LEVEL_INFO) | |
| printk("%s(%d)n_hdlc_tty_ioctl() called %d\n", | |
| __FILE__,__LINE__,cmd); | |
| /* Verify the status of the device */ | |
| if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC) | |
| return -EBADF; | |
| switch (cmd) { | |
| case FIONREAD: | |
| /* report count of read data available */ | |
| /* in next available frame (if any) */ | |
| spin_lock_irqsave(&n_hdlc->rx_buf_list.spinlock,flags); | |
| buf = list_first_entry_or_null(&n_hdlc->rx_buf_list.list, | |
| struct n_hdlc_buf, list_item); | |
| if (buf) | |
| count = buf->count; | |
| else | |
| count = 0; | |
| spin_unlock_irqrestore(&n_hdlc->rx_buf_list.spinlock,flags); | |
| error = put_user(count, (int __user *)arg); | |
| break; | |
| case TIOCOUTQ: | |
| /* get the pending tx byte count in the driver */ | |
| count = tty_chars_in_buffer(tty); | |
| /* add size of next output frame in queue */ | |
| spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock,flags); | |
| buf = list_first_entry_or_null(&n_hdlc->tx_buf_list.list, | |
| struct n_hdlc_buf, list_item); | |
| if (buf) | |
| count += buf->count; | |
| spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock,flags); | |
| error = put_user(count, (int __user *)arg); | |
| break; | |
| case TCFLSH: | |
| switch (arg) { | |
| case TCIOFLUSH: | |
| case TCOFLUSH: | |
| flush_tx_queue(tty); | |
| } | |
| /* fall through to default */ | |
| default: | |
| error = n_tty_ioctl_helper(tty, file, cmd, arg); | |
| break; | |
| } | |
| return error; | |
| } /* end of n_hdlc_tty_ioctl() */ | |
| /** | |
| * n_hdlc_tty_poll - TTY callback for poll system call | |
| * @tty - pointer to tty instance data | |
| * @filp - pointer to open file object for device | |
| * @poll_table - wait queue for operations | |
| * | |
| * Determine which operations (read/write) will not block and return info | |
| * to caller. | |
| * Returns a bit mask containing info on which ops will not block. | |
| */ | |
| static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp, | |
| poll_table *wait) | |
| { | |
| struct n_hdlc *n_hdlc = tty2n_hdlc (tty); | |
| unsigned int mask = 0; | |
| if (debuglevel >= DEBUG_LEVEL_INFO) | |
| printk("%s(%d)n_hdlc_tty_poll() called\n",__FILE__,__LINE__); | |
| if (n_hdlc && n_hdlc->magic == HDLC_MAGIC && tty == n_hdlc->tty) { | |
| /* queue current process into any wait queue that */ | |
| /* may awaken in the future (read and write) */ | |
| poll_wait(filp, &tty->read_wait, wait); | |
| poll_wait(filp, &tty->write_wait, wait); | |
| /* set bits for operations that won't block */ | |
| if (!list_empty(&n_hdlc->rx_buf_list.list)) | |
| mask |= POLLIN | POLLRDNORM; /* readable */ | |
| if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) | |
| mask |= POLLHUP; | |
| if (tty_hung_up_p(filp)) | |
| mask |= POLLHUP; | |
| if (!tty_is_writelocked(tty) && | |
| !list_empty(&n_hdlc->tx_free_buf_list.list)) | |
| mask |= POLLOUT | POLLWRNORM; /* writable */ | |
| } | |
| return mask; | |
| } /* end of n_hdlc_tty_poll() */ | |
| /** | |
| * n_hdlc_alloc - allocate an n_hdlc instance data structure | |
| * | |
| * Returns a pointer to newly created structure if success, otherwise %NULL | |
| */ | |
| static struct n_hdlc *n_hdlc_alloc(void) | |
| { | |
| struct n_hdlc_buf *buf; | |
| int i; | |
| struct n_hdlc *n_hdlc = kzalloc(sizeof(*n_hdlc), GFP_KERNEL); | |
| if (!n_hdlc) | |
| return NULL; | |
| spin_lock_init(&n_hdlc->rx_free_buf_list.spinlock); | |
| spin_lock_init(&n_hdlc->tx_free_buf_list.spinlock); | |
| spin_lock_init(&n_hdlc->rx_buf_list.spinlock); | |
| spin_lock_init(&n_hdlc->tx_buf_list.spinlock); | |
| INIT_LIST_HEAD(&n_hdlc->rx_free_buf_list.list); | |
| INIT_LIST_HEAD(&n_hdlc->tx_free_buf_list.list); | |
| INIT_LIST_HEAD(&n_hdlc->rx_buf_list.list); | |
| INIT_LIST_HEAD(&n_hdlc->tx_buf_list.list); | |
| /* allocate free rx buffer list */ | |
| for(i=0;i<DEFAULT_RX_BUF_COUNT;i++) { | |
| buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL); | |
| if (buf) | |
| n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,buf); | |
| else if (debuglevel >= DEBUG_LEVEL_INFO) | |
| printk("%s(%d)n_hdlc_alloc(), kalloc() failed for rx buffer %d\n",__FILE__,__LINE__, i); | |
| } | |
| /* allocate free tx buffer list */ | |
| for(i=0;i<DEFAULT_TX_BUF_COUNT;i++) { | |
| buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL); | |
| if (buf) | |
| n_hdlc_buf_put(&n_hdlc->tx_free_buf_list,buf); | |
| else if (debuglevel >= DEBUG_LEVEL_INFO) | |
| printk("%s(%d)n_hdlc_alloc(), kalloc() failed for tx buffer %d\n",__FILE__,__LINE__, i); | |
| } | |
| /* Initialize the control block */ | |
| n_hdlc->magic = HDLC_MAGIC; | |
| n_hdlc->flags = 0; | |
| return n_hdlc; | |
| } /* end of n_hdlc_alloc() */ | |
| /** | |
| * n_hdlc_buf_return - put the HDLC buffer after the head of the specified list | |
| * @buf_list - pointer to the buffer list | |
| * @buf - pointer to the buffer | |
| */ | |
| static void n_hdlc_buf_return(struct n_hdlc_buf_list *buf_list, | |
| struct n_hdlc_buf *buf) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&buf_list->spinlock, flags); | |
| list_add(&buf->list_item, &buf_list->list); | |
| buf_list->count++; | |
| spin_unlock_irqrestore(&buf_list->spinlock, flags); | |
| } | |
| /** | |
| * n_hdlc_buf_put - add specified HDLC buffer to tail of specified list | |
| * @buf_list - pointer to buffer list | |
| * @buf - pointer to buffer | |
| */ | |
| static void n_hdlc_buf_put(struct n_hdlc_buf_list *buf_list, | |
| struct n_hdlc_buf *buf) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&buf_list->spinlock, flags); | |
| list_add_tail(&buf->list_item, &buf_list->list); | |
| buf_list->count++; | |
| spin_unlock_irqrestore(&buf_list->spinlock, flags); | |
| } /* end of n_hdlc_buf_put() */ | |
| /** | |
| * n_hdlc_buf_get - remove and return an HDLC buffer from list | |
| * @buf_list - pointer to HDLC buffer list | |
| * | |
| * Remove and return an HDLC buffer from the head of the specified HDLC buffer | |
| * list. | |
| * Returns a pointer to HDLC buffer if available, otherwise %NULL. | |
| */ | |
| static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *buf_list) | |
| { | |
| unsigned long flags; | |
| struct n_hdlc_buf *buf; | |
| spin_lock_irqsave(&buf_list->spinlock, flags); | |
| buf = list_first_entry_or_null(&buf_list->list, | |
| struct n_hdlc_buf, list_item); | |
| if (buf) { | |
| list_del(&buf->list_item); | |
| buf_list->count--; | |
| } | |
| spin_unlock_irqrestore(&buf_list->spinlock, flags); | |
| return buf; | |
| } /* end of n_hdlc_buf_get() */ | |
| static const char hdlc_banner[] __initconst = | |
| KERN_INFO "HDLC line discipline maxframe=%u\n"; | |
| static const char hdlc_register_ok[] __initconst = | |
| KERN_INFO "N_HDLC line discipline registered.\n"; | |
| static const char hdlc_register_fail[] __initconst = | |
| KERN_ERR "error registering line discipline: %d\n"; | |
| static int __init n_hdlc_init(void) | |
| { | |
| int status; | |
| /* range check maxframe arg */ | |
| if (maxframe < 4096) | |
| maxframe = 4096; | |
| else if (maxframe > 65535) | |
| maxframe = 65535; | |
| printk(hdlc_banner, maxframe); | |
| status = tty_register_ldisc(N_HDLC, &n_hdlc_ldisc); | |
| if (!status) | |
| printk(hdlc_register_ok); | |
| else | |
| printk(hdlc_register_fail, status); | |
| return status; | |
| } /* end of init_module() */ | |
| static const char hdlc_unregister_ok[] __exitdata = | |
| KERN_INFO "N_HDLC: line discipline unregistered\n"; | |
| static const char hdlc_unregister_fail[] __exitdata = | |
| KERN_ERR "N_HDLC: can't unregister line discipline (err = %d)\n"; | |
| static void __exit n_hdlc_exit(void) | |
| { | |
| /* Release tty registration of line discipline */ | |
| int status = tty_unregister_ldisc(N_HDLC); | |
| if (status) | |
| printk(hdlc_unregister_fail, status); | |
| else | |
| printk(hdlc_unregister_ok); | |
| } | |
| module_init(n_hdlc_init); | |
| module_exit(n_hdlc_exit); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Paul Fulghum paulkf@microgate.com"); | |
| module_param(debuglevel, int, 0); | |
| module_param(maxframe, int, 0); | |
| MODULE_ALIAS_LDISC(N_HDLC); |