| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * cfg80211 scan result handling | |
| * | |
| * Copyright 2008 Johannes Berg <johannes@sipsolutions.net> | |
| * Copyright 2013-2014 Intel Mobile Communications GmbH | |
| * Copyright 2016 Intel Deutschland GmbH | |
| * Copyright (C) 2018-2026 Intel Corporation | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/slab.h> | |
| #include <linux/module.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/wireless.h> | |
| #include <linux/nl80211.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/crc32.h> | |
| #include <linux/bitfield.h> | |
| #include <net/arp.h> | |
| #include <net/cfg80211.h> | |
| #include <net/cfg80211-wext.h> | |
| #include <net/iw_handler.h> | |
| #include <kunit/visibility.h> | |
| #include "core.h" | |
| #include "nl80211.h" | |
| #include "wext-compat.h" | |
| #include "rdev-ops.h" | |
| /** | |
| * DOC: BSS tree/list structure | |
| * | |
| * At the top level, the BSS list is kept in both a list in each | |
| * registered device (@bss_list) as well as an RB-tree for faster | |
| * lookup. In the RB-tree, entries can be looked up using their | |
| * channel, MESHID, MESHCONF (for MBSSes) or channel, BSSID, SSID | |
| * for other BSSes. | |
| * | |
| * Due to the possibility of hidden SSIDs, there's a second level | |
| * structure, the "hidden_list" and "hidden_beacon_bss" pointer. | |
| * The hidden_list connects all BSSes belonging to a single AP | |
| * that has a hidden SSID, and connects beacon and probe response | |
| * entries. For a probe response entry for a hidden SSID, the | |
| * hidden_beacon_bss pointer points to the BSS struct holding the | |
| * beacon's information. | |
| * | |
| * Reference counting is done for all these references except for | |
| * the hidden_list, so that a beacon BSS struct that is otherwise | |
| * not referenced has one reference for being on the bss_list and | |
| * one for each probe response entry that points to it using the | |
| * hidden_beacon_bss pointer. When a BSS struct that has such a | |
| * pointer is get/put, the refcount update is also propagated to | |
| * the referenced struct, this ensure that it cannot get removed | |
| * while somebody is using the probe response version. | |
| * | |
| * Note that the hidden_beacon_bss pointer never changes, due to | |
| * the reference counting. Therefore, no locking is needed for | |
| * it. | |
| * | |
| * Also note that the hidden_beacon_bss pointer is only relevant | |
| * if the driver uses something other than the IEs, e.g. private | |
| * data stored in the BSS struct, since the beacon IEs are | |
| * also linked into the probe response struct. | |
| */ | |
| /* | |
| * Limit the number of BSS entries stored in mac80211. Each one is | |
| * a bit over 4k at most, so this limits to roughly 4-5M of memory. | |
| * If somebody wants to really attack this though, they'd likely | |
| * use small beacons, and only one type of frame, limiting each of | |
| * the entries to a much smaller size (in order to generate more | |
| * entries in total, so overhead is bigger.) | |
| */ | |
| static int bss_entries_limit = 1000; | |
| module_param(bss_entries_limit, int, 0644); | |
| MODULE_PARM_DESC(bss_entries_limit, | |
| "limit to number of scan BSS entries (per wiphy, default 1000)"); | |
| #define IEEE80211_SCAN_RESULT_EXPIRE (30 * HZ) | |
| static void bss_free(struct cfg80211_internal_bss *bss) | |
| { | |
| struct cfg80211_bss_ies *ies; | |
| if (WARN_ON(atomic_read(&bss->hold))) | |
| return; | |
| ies = (void *)rcu_access_pointer(bss->pub.beacon_ies); | |
| if (ies && !bss->pub.hidden_beacon_bss) | |
| kfree_rcu(ies, rcu_head); | |
| ies = (void *)rcu_access_pointer(bss->pub.proberesp_ies); | |
| if (ies) | |
| kfree_rcu(ies, rcu_head); | |
| /* | |
| * This happens when the module is removed, it doesn't | |
| * really matter any more save for completeness | |
| */ | |
| if (!list_empty(&bss->hidden_list)) | |
| list_del(&bss->hidden_list); | |
| kfree(bss); | |
| } | |
| static inline void bss_ref_get(struct cfg80211_registered_device *rdev, | |
| struct cfg80211_internal_bss *bss) | |
| { | |
| lockdep_assert_held(&rdev->bss_lock); | |
| bss->refcount++; | |
| if (bss->pub.hidden_beacon_bss) | |
| bss_from_pub(bss->pub.hidden_beacon_bss)->refcount++; | |
| if (bss->pub.transmitted_bss) | |
| bss_from_pub(bss->pub.transmitted_bss)->refcount++; | |
| } | |
| static inline void bss_ref_put(struct cfg80211_registered_device *rdev, | |
| struct cfg80211_internal_bss *bss) | |
| { | |
| lockdep_assert_held(&rdev->bss_lock); | |
| if (bss->pub.hidden_beacon_bss) { | |
| struct cfg80211_internal_bss *hbss; | |
| hbss = bss_from_pub(bss->pub.hidden_beacon_bss); | |
| hbss->refcount--; | |
| if (hbss->refcount == 0) | |
| bss_free(hbss); | |
| } | |
| if (bss->pub.transmitted_bss) { | |
| struct cfg80211_internal_bss *tbss; | |
| tbss = bss_from_pub(bss->pub.transmitted_bss); | |
| tbss->refcount--; | |
| if (tbss->refcount == 0) | |
| bss_free(tbss); | |
| } | |
| bss->refcount--; | |
| if (bss->refcount == 0) | |
| bss_free(bss); | |
| } | |
| static bool __cfg80211_unlink_bss(struct cfg80211_registered_device *rdev, | |
| struct cfg80211_internal_bss *bss) | |
| { | |
| lockdep_assert_held(&rdev->bss_lock); | |
| if (!list_empty(&bss->hidden_list)) { | |
| /* | |
| * don't remove the beacon entry if it has | |
| * probe responses associated with it | |
| */ | |
| if (!bss->pub.hidden_beacon_bss) | |
| return false; | |
| /* | |
| * if it's a probe response entry break its | |
| * link to the other entries in the group | |
| */ | |
| list_del_init(&bss->hidden_list); | |
| } | |
| list_del_init(&bss->list); | |
| list_del_init(&bss->pub.nontrans_list); | |
| rb_erase(&bss->rbn, &rdev->bss_tree); | |
| rdev->bss_entries--; | |
| WARN_ONCE((rdev->bss_entries == 0) ^ list_empty(&rdev->bss_list), | |
| "rdev bss entries[%d]/list[empty:%d] corruption\n", | |
| rdev->bss_entries, list_empty(&rdev->bss_list)); | |
| bss_ref_put(rdev, bss); | |
| return true; | |
| } | |
| bool cfg80211_is_element_inherited(const struct element *elem, | |
| const struct element *non_inherit_elem) | |
| { | |
| u8 id_len, ext_id_len, i, loop_len, id; | |
| const u8 *list; | |
| if (elem->id == WLAN_EID_MULTIPLE_BSSID) | |
| return false; | |
| if (elem->id == WLAN_EID_EXTENSION && elem->datalen > 1 && | |
| elem->data[0] == WLAN_EID_EXT_EHT_MULTI_LINK) | |
| return false; | |
| if (!non_inherit_elem || non_inherit_elem->datalen < 2) | |
| return true; | |
| /* | |
| * non inheritance element format is: | |
| * ext ID (56) | IDs list len | list | extension IDs list len | list | |
| * Both lists are optional. Both lengths are mandatory. | |
| * This means valid length is: | |
| * elem_len = 1 (extension ID) + 2 (list len fields) + list lengths | |
| */ | |
| id_len = non_inherit_elem->data[1]; | |
| if (non_inherit_elem->datalen < 3 + id_len) | |
| return true; | |
| ext_id_len = non_inherit_elem->data[2 + id_len]; | |
| if (non_inherit_elem->datalen < 3 + id_len + ext_id_len) | |
| return true; | |
| if (elem->id == WLAN_EID_EXTENSION) { | |
| if (!ext_id_len || !elem->datalen) | |
| return true; | |
| loop_len = ext_id_len; | |
| list = &non_inherit_elem->data[3 + id_len]; | |
| id = elem->data[0]; | |
| } else { | |
| if (!id_len) | |
| return true; | |
| loop_len = id_len; | |
| list = &non_inherit_elem->data[2]; | |
| id = elem->id; | |
| } | |
| for (i = 0; i < loop_len; i++) { | |
| if (list[i] == id) | |
| return false; | |
| } | |
| return true; | |
| } | |
| EXPORT_SYMBOL(cfg80211_is_element_inherited); | |
| static size_t cfg80211_copy_elem_with_frags(const struct element *elem, | |
| const u8 *ie, size_t ie_len, | |
| u8 **pos, u8 *buf, size_t buf_len) | |
| { | |
| if (WARN_ON((u8 *)elem < ie || elem->data > ie + ie_len || | |
| elem->data + elem->datalen > ie + ie_len)) | |
| return 0; | |
| if (elem->datalen + 2 > buf + buf_len - *pos) | |
| return 0; | |
| memcpy(*pos, elem, elem->datalen + 2); | |
| *pos += elem->datalen + 2; | |
| /* Finish if it is not fragmented */ | |
| if (elem->datalen != 255) | |
| return *pos - buf; | |
| ie_len = ie + ie_len - elem->data - elem->datalen; | |
| ie = (const u8 *)elem->data + elem->datalen; | |
| for_each_element(elem, ie, ie_len) { | |
| if (elem->id != WLAN_EID_FRAGMENT) | |
| break; | |
| if (elem->datalen + 2 > buf + buf_len - *pos) | |
| return 0; | |
| memcpy(*pos, elem, elem->datalen + 2); | |
| *pos += elem->datalen + 2; | |
| if (elem->datalen != 255) | |
| break; | |
| } | |
| return *pos - buf; | |
| } | |
| VISIBLE_IF_CFG80211_KUNIT size_t | |
| cfg80211_gen_new_ie(const u8 *ie, size_t ielen, | |
| const u8 *subie, size_t subie_len, | |
| u8 *new_ie, size_t new_ie_len) | |
| { | |
| const struct element *non_inherit_elem, *parent, *sub; | |
| u8 *pos = new_ie; | |
| const u8 *mbssid_index_ie; | |
| u8 id, ext_id, bssid_index = 255; | |
| unsigned int match_len; | |
| non_inherit_elem = cfg80211_find_ext_elem(WLAN_EID_EXT_NON_INHERITANCE, | |
| subie, subie_len); | |
| mbssid_index_ie = cfg80211_find_ie(WLAN_EID_MULTI_BSSID_IDX, subie, | |
| subie_len); | |
| if (mbssid_index_ie && mbssid_index_ie[1] > 0 && | |
| mbssid_index_ie[2] > 0 && mbssid_index_ie[2] <= 46) | |
| bssid_index = mbssid_index_ie[2]; | |
| /* We copy the elements one by one from the parent to the generated | |
| * elements. | |
| * If they are not inherited (included in subie or in the non | |
| * inheritance element), then we copy all occurrences the first time | |
| * we see this element type. | |
| */ | |
| for_each_element(parent, ie, ielen) { | |
| if (parent->id == WLAN_EID_FRAGMENT) | |
| continue; | |
| if (parent->id == WLAN_EID_EXTENSION) { | |
| if (parent->datalen < 1) | |
| continue; | |
| id = WLAN_EID_EXTENSION; | |
| ext_id = parent->data[0]; | |
| match_len = 1; | |
| } else { | |
| id = parent->id; | |
| match_len = 0; | |
| } | |
| /* Find first occurrence in subie */ | |
| sub = cfg80211_find_elem_match(id, subie, subie_len, | |
| &ext_id, match_len, 0); | |
| /* Copy from parent if not in subie and inherited */ | |
| if (!sub && | |
| cfg80211_is_element_inherited(parent, non_inherit_elem)) { | |
| if (!cfg80211_copy_elem_with_frags(parent, | |
| ie, ielen, | |
| &pos, new_ie, | |
| new_ie_len)) | |
| return 0; | |
| continue; | |
| } | |
| /* For ML probe response, match the MLE in the frame body with | |
| * MLD id being 'bssid_index' | |
| */ | |
| if (parent->id == WLAN_EID_EXTENSION && | |
| parent->data[0] == WLAN_EID_EXT_EHT_MULTI_LINK && | |
| ieee80211_mle_type_ok(parent->data + 1, | |
| IEEE80211_ML_CONTROL_TYPE_BASIC, | |
| parent->datalen - 1) && | |
| bssid_index == ieee80211_mle_get_mld_id(parent->data + 1)) { | |
| if (!cfg80211_copy_elem_with_frags(parent, | |
| ie, ielen, | |
| &pos, new_ie, | |
| new_ie_len)) | |
| return 0; | |
| /* Continue here to prevent processing the MLE in | |
| * sub-element, which AP MLD should not carry | |
| */ | |
| continue; | |
| } | |
| /* Already copied if an earlier element had the same type */ | |
| if (cfg80211_find_elem_match(id, ie, (u8 *)parent - ie, | |
| &ext_id, match_len, 0)) | |
| continue; | |
| /* Not inheriting, copy all similar elements from subie */ | |
| while (sub) { | |
| if (!cfg80211_copy_elem_with_frags(sub, | |
| subie, subie_len, | |
| &pos, new_ie, | |
| new_ie_len)) | |
| return 0; | |
| sub = cfg80211_find_elem_match(id, | |
| sub->data + sub->datalen, | |
| subie_len + subie - | |
| (sub->data + | |
| sub->datalen), | |
| &ext_id, match_len, 0); | |
| } | |
| } | |
| /* The above misses elements that are included in subie but not in the | |
| * parent, so do a pass over subie and append those. | |
| * Skip the non-tx BSSID caps and non-inheritance element. | |
| */ | |
| for_each_element(sub, subie, subie_len) { | |
| if (sub->id == WLAN_EID_NON_TX_BSSID_CAP) | |
| continue; | |
| if (sub->id == WLAN_EID_FRAGMENT) | |
| continue; | |
| if (sub->id == WLAN_EID_EXTENSION) { | |
| if (sub->datalen < 1) | |
| continue; | |
| id = WLAN_EID_EXTENSION; | |
| ext_id = sub->data[0]; | |
| match_len = 1; | |
| if (ext_id == WLAN_EID_EXT_NON_INHERITANCE) | |
| continue; | |
| } else { | |
| id = sub->id; | |
| match_len = 0; | |
| } | |
| /* Processed if one was included in the parent */ | |
| if (cfg80211_find_elem_match(id, ie, ielen, | |
| &ext_id, match_len, 0)) | |
| continue; | |
| if (!cfg80211_copy_elem_with_frags(sub, subie, subie_len, | |
| &pos, new_ie, new_ie_len)) | |
| return 0; | |
| } | |
| return pos - new_ie; | |
| } | |
| EXPORT_SYMBOL_IF_CFG80211_KUNIT(cfg80211_gen_new_ie); | |
| static bool is_bss(struct cfg80211_bss *a, const u8 *bssid, | |
| const u8 *ssid, size_t ssid_len) | |
| { | |
| const struct cfg80211_bss_ies *ies; | |
| const struct element *ssid_elem; | |
| if (bssid && !ether_addr_equal(a->bssid, bssid)) | |
| return false; | |
| if (!ssid) | |
| return true; | |
| ies = rcu_access_pointer(a->ies); | |
| if (!ies) | |
| return false; | |
| ssid_elem = cfg80211_find_elem(WLAN_EID_SSID, ies->data, ies->len); | |
| if (!ssid_elem) | |
| return false; | |
| if (ssid_elem->datalen != ssid_len) | |
| return false; | |
| return memcmp(ssid_elem->data, ssid, ssid_len) == 0; | |
| } | |
| static int | |
| cfg80211_add_nontrans_list(struct cfg80211_bss *trans_bss, | |
| struct cfg80211_bss *nontrans_bss) | |
| { | |
| const struct element *ssid_elem; | |
| struct cfg80211_bss *bss = NULL; | |
| rcu_read_lock(); | |
| ssid_elem = ieee80211_bss_get_elem(nontrans_bss, WLAN_EID_SSID); | |
| if (!ssid_elem) { | |
| rcu_read_unlock(); | |
| return -EINVAL; | |
| } | |
| /* check if nontrans_bss is in the list */ | |
| list_for_each_entry(bss, &trans_bss->nontrans_list, nontrans_list) { | |
| if (is_bss(bss, nontrans_bss->bssid, ssid_elem->data, | |
| ssid_elem->datalen)) { | |
| rcu_read_unlock(); | |
| return 0; | |
| } | |
| } | |
| rcu_read_unlock(); | |
| /* | |
| * This is a bit weird - it's not on the list, but already on another | |
| * one! The only way that could happen is if there's some BSSID/SSID | |
| * shared by multiple APs in their multi-BSSID profiles, potentially | |
| * with hidden SSID mixed in ... ignore it. | |
| */ | |
| if (!list_empty(&nontrans_bss->nontrans_list)) | |
| return -EINVAL; | |
| /* add to the list */ | |
| list_add_tail(&nontrans_bss->nontrans_list, &trans_bss->nontrans_list); | |
| return 0; | |
| } | |
| static void __cfg80211_bss_expire(struct cfg80211_registered_device *rdev, | |
| unsigned long expire_time) | |
| { | |
| struct cfg80211_internal_bss *bss, *tmp; | |
| bool expired = false; | |
| lockdep_assert_held(&rdev->bss_lock); | |
| list_for_each_entry_safe(bss, tmp, &rdev->bss_list, list) { | |
| if (atomic_read(&bss->hold)) | |
| continue; | |
| if (!time_after(expire_time, bss->ts)) | |
| continue; | |
| if (__cfg80211_unlink_bss(rdev, bss)) | |
| expired = true; | |
| } | |
| if (expired) | |
| rdev->bss_generation++; | |
| } | |
| static bool cfg80211_bss_expire_oldest(struct cfg80211_registered_device *rdev) | |
| { | |
| struct cfg80211_internal_bss *bss, *oldest = NULL; | |
| bool ret; | |
| lockdep_assert_held(&rdev->bss_lock); | |
| list_for_each_entry(bss, &rdev->bss_list, list) { | |
| if (atomic_read(&bss->hold)) | |
| continue; | |
| if (!list_empty(&bss->hidden_list) && | |
| !bss->pub.hidden_beacon_bss) | |
| continue; | |
| if (oldest && time_before(oldest->ts, bss->ts)) | |
| continue; | |
| oldest = bss; | |
| } | |
| if (WARN_ON(!oldest)) | |
| return false; | |
| /* | |
| * The callers make sure to increase rdev->bss_generation if anything | |
| * gets removed (and a new entry added), so there's no need to also do | |
| * it here. | |
| */ | |
| ret = __cfg80211_unlink_bss(rdev, oldest); | |
| WARN_ON(!ret); | |
| return ret; | |
| } | |
| static u8 cfg80211_parse_bss_param(u8 data, | |
| struct cfg80211_colocated_ap *coloc_ap) | |
| { | |
| coloc_ap->oct_recommended = | |
| u8_get_bits(data, IEEE80211_RNR_TBTT_PARAMS_OCT_RECOMMENDED); | |
| coloc_ap->same_ssid = | |
| u8_get_bits(data, IEEE80211_RNR_TBTT_PARAMS_SAME_SSID); | |
| coloc_ap->multi_bss = | |
| u8_get_bits(data, IEEE80211_RNR_TBTT_PARAMS_MULTI_BSSID); | |
| coloc_ap->transmitted_bssid = | |
| u8_get_bits(data, IEEE80211_RNR_TBTT_PARAMS_TRANSMITTED_BSSID); | |
| coloc_ap->unsolicited_probe = | |
| u8_get_bits(data, IEEE80211_RNR_TBTT_PARAMS_PROBE_ACTIVE); | |
| coloc_ap->colocated_ess = | |
| u8_get_bits(data, IEEE80211_RNR_TBTT_PARAMS_COLOC_ESS); | |
| return u8_get_bits(data, IEEE80211_RNR_TBTT_PARAMS_COLOC_AP); | |
| } | |
| static int cfg80211_calc_short_ssid(const struct cfg80211_bss_ies *ies, | |
| const struct element **elem, u32 *s_ssid) | |
| { | |
| *elem = cfg80211_find_elem(WLAN_EID_SSID, ies->data, ies->len); | |
| if (!*elem || (*elem)->datalen > IEEE80211_MAX_SSID_LEN) | |
| return -EINVAL; | |
| *s_ssid = ~crc32_le(~0, (*elem)->data, (*elem)->datalen); | |
| return 0; | |
| } | |
| VISIBLE_IF_CFG80211_KUNIT void | |
| cfg80211_free_coloc_ap_list(struct list_head *coloc_ap_list) | |
| { | |
| struct cfg80211_colocated_ap *ap, *tmp_ap; | |
| list_for_each_entry_safe(ap, tmp_ap, coloc_ap_list, list) { | |
| list_del(&ap->list); | |
| kfree(ap); | |
| } | |
| } | |
| EXPORT_SYMBOL_IF_CFG80211_KUNIT(cfg80211_free_coloc_ap_list); | |
| static int cfg80211_parse_ap_info(struct cfg80211_colocated_ap *entry, | |
| const u8 *pos, u8 length, | |
| const struct element *ssid_elem, | |
| u32 s_ssid_tmp) | |
| { | |
| u8 bss_params; | |
| entry->psd_20 = IEEE80211_RNR_TBTT_PARAMS_PSD_RESERVED; | |
| /* The length is already verified by the caller to contain bss_params */ | |
| if (length > sizeof(struct ieee80211_tbtt_info_7_8_9)) { | |
| struct ieee80211_tbtt_info_ge_11 *tbtt_info = (void *)pos; | |
| memcpy(entry->bssid, tbtt_info->bssid, ETH_ALEN); | |
| entry->short_ssid = le32_to_cpu(tbtt_info->short_ssid); | |
| entry->short_ssid_valid = true; | |
| bss_params = tbtt_info->bss_params; | |
| /* Ignore disabled links */ | |
| if (length >= offsetofend(typeof(*tbtt_info), mld_params)) { | |
| if (le16_get_bits(tbtt_info->mld_params.params, | |
| IEEE80211_RNR_MLD_PARAMS_DISABLED_LINK)) | |
| return -EINVAL; | |
| } | |
| if (length >= offsetofend(struct ieee80211_tbtt_info_ge_11, | |
| psd_20)) | |
| entry->psd_20 = tbtt_info->psd_20; | |
| } else { | |
| struct ieee80211_tbtt_info_7_8_9 *tbtt_info = (void *)pos; | |
| memcpy(entry->bssid, tbtt_info->bssid, ETH_ALEN); | |
| bss_params = tbtt_info->bss_params; | |
| if (length == offsetofend(struct ieee80211_tbtt_info_7_8_9, | |
| psd_20)) | |
| entry->psd_20 = tbtt_info->psd_20; | |
| } | |
| /* ignore entries with invalid BSSID */ | |
| if (!is_valid_ether_addr(entry->bssid)) | |
| return -EINVAL; | |
| /* skip non colocated APs */ | |
| if (!cfg80211_parse_bss_param(bss_params, entry)) | |
| return -EINVAL; | |
| /* no information about the short ssid. Consider the entry valid | |
| * for now. It would later be dropped in case there are explicit | |
| * SSIDs that need to be matched | |
| */ | |
| if (!entry->same_ssid && !entry->short_ssid_valid) | |
| return 0; | |
| if (entry->same_ssid) { | |
| entry->short_ssid = s_ssid_tmp; | |
| entry->short_ssid_valid = true; | |
| /* | |
| * This is safe because we validate datalen in | |
| * cfg80211_parse_colocated_ap(), before calling this | |
| * function. | |
| */ | |
| memcpy(&entry->ssid, &ssid_elem->data, ssid_elem->datalen); | |
| entry->ssid_len = ssid_elem->datalen; | |
| } | |
| return 0; | |
| } | |
| bool cfg80211_iter_rnr(const u8 *elems, size_t elems_len, | |
| enum cfg80211_rnr_iter_ret | |
| (*iter)(void *data, u8 type, | |
| const struct ieee80211_neighbor_ap_info *info, | |
| const u8 *tbtt_info, u8 tbtt_info_len), | |
| void *iter_data) | |
| { | |
| const struct element *rnr; | |
| const u8 *pos, *end; | |
| for_each_element_id(rnr, WLAN_EID_REDUCED_NEIGHBOR_REPORT, | |
| elems, elems_len) { | |
| const struct ieee80211_neighbor_ap_info *info; | |
| pos = rnr->data; | |
| end = rnr->data + rnr->datalen; | |
| /* RNR IE may contain more than one NEIGHBOR_AP_INFO */ | |
| while (sizeof(*info) <= end - pos) { | |
| u8 length, i, count; | |
| u8 type; | |
| info = (void *)pos; | |
| count = u8_get_bits(info->tbtt_info_hdr, | |
| IEEE80211_AP_INFO_TBTT_HDR_COUNT) + | |
| 1; | |
| length = info->tbtt_info_len; | |
| pos += sizeof(*info); | |
| if (count * length > end - pos) | |
| return false; | |
| type = u8_get_bits(info->tbtt_info_hdr, | |
| IEEE80211_AP_INFO_TBTT_HDR_TYPE); | |
| for (i = 0; i < count; i++) { | |
| switch (iter(iter_data, type, info, | |
| pos, length)) { | |
| case RNR_ITER_CONTINUE: | |
| break; | |
| case RNR_ITER_BREAK: | |
| return true; | |
| case RNR_ITER_ERROR: | |
| return false; | |
| } | |
| pos += length; | |
| } | |
| } | |
| if (pos != end) | |
| return false; | |
| } | |
| return true; | |
| } | |
| EXPORT_SYMBOL_GPL(cfg80211_iter_rnr); | |
| struct colocated_ap_data { | |
| const struct element *ssid_elem; | |
| struct list_head ap_list; | |
| u32 s_ssid_tmp; | |
| int n_coloc; | |
| }; | |
| static enum cfg80211_rnr_iter_ret | |
| cfg80211_parse_colocated_ap_iter(void *_data, u8 type, | |
| const struct ieee80211_neighbor_ap_info *info, | |
| const u8 *tbtt_info, u8 tbtt_info_len) | |
| { | |
| struct colocated_ap_data *data = _data; | |
| struct cfg80211_colocated_ap *entry; | |
| enum nl80211_band band; | |
| if (type != IEEE80211_TBTT_INFO_TYPE_TBTT) | |
| return RNR_ITER_CONTINUE; | |
| if (!ieee80211_operating_class_to_band(info->op_class, &band)) | |
| return RNR_ITER_CONTINUE; | |
| /* TBTT info must include bss param + BSSID + (short SSID or | |
| * same_ssid bit to be set). Ignore other options, and move to | |
| * the next AP info | |
| */ | |
| if (band != NL80211_BAND_6GHZ || | |
| !(tbtt_info_len == offsetofend(struct ieee80211_tbtt_info_7_8_9, | |
| bss_params) || | |
| tbtt_info_len == sizeof(struct ieee80211_tbtt_info_7_8_9) || | |
| tbtt_info_len >= offsetofend(struct ieee80211_tbtt_info_ge_11, | |
| bss_params))) | |
| return RNR_ITER_CONTINUE; | |
| entry = kzalloc_obj(*entry, GFP_ATOMIC); | |
| if (!entry) | |
| return RNR_ITER_ERROR; | |
| entry->center_freq = | |
| ieee80211_channel_to_frequency(info->channel, band); | |
| if (!cfg80211_parse_ap_info(entry, tbtt_info, tbtt_info_len, | |
| data->ssid_elem, data->s_ssid_tmp)) { | |
| struct cfg80211_colocated_ap *tmp; | |
| /* Don't add duplicate BSSIDs on the same channel. */ | |
| list_for_each_entry(tmp, &data->ap_list, list) { | |
| if (ether_addr_equal(tmp->bssid, entry->bssid) && | |
| tmp->center_freq == entry->center_freq) { | |
| kfree(entry); | |
| return RNR_ITER_CONTINUE; | |
| } | |
| } | |
| data->n_coloc++; | |
| list_add_tail(&entry->list, &data->ap_list); | |
| } else { | |
| kfree(entry); | |
| } | |
| return RNR_ITER_CONTINUE; | |
| } | |
| VISIBLE_IF_CFG80211_KUNIT int | |
| cfg80211_parse_colocated_ap(const struct cfg80211_bss_ies *ies, | |
| struct list_head *list) | |
| { | |
| struct colocated_ap_data data = {}; | |
| int ret; | |
| INIT_LIST_HEAD(&data.ap_list); | |
| ret = cfg80211_calc_short_ssid(ies, &data.ssid_elem, &data.s_ssid_tmp); | |
| if (ret) | |
| return 0; | |
| if (!cfg80211_iter_rnr(ies->data, ies->len, | |
| cfg80211_parse_colocated_ap_iter, &data)) { | |
| cfg80211_free_coloc_ap_list(&data.ap_list); | |
| return 0; | |
| } | |
| list_splice_tail(&data.ap_list, list); | |
| return data.n_coloc; | |
| } | |
| EXPORT_SYMBOL_IF_CFG80211_KUNIT(cfg80211_parse_colocated_ap); | |
| static void cfg80211_scan_req_add_chan(struct cfg80211_scan_request *request, | |
| struct ieee80211_channel *chan, | |
| bool add_to_6ghz) | |
| { | |
| int i; | |
| u32 n_channels = request->n_channels; | |
| struct cfg80211_scan_6ghz_params *params = | |
| &request->scan_6ghz_params[request->n_6ghz_params]; | |
| for (i = 0; i < n_channels; i++) { | |
| if (request->channels[i] == chan) { | |
| if (add_to_6ghz) | |
| params->channel_idx = i; | |
| return; | |
| } | |
| } | |
| request->n_channels++; | |
| request->channels[n_channels] = chan; | |
| if (add_to_6ghz) | |
| request->scan_6ghz_params[request->n_6ghz_params].channel_idx = | |
| n_channels; | |
| } | |
| static bool cfg80211_find_ssid_match(struct cfg80211_colocated_ap *ap, | |
| struct cfg80211_scan_request *request) | |
| { | |
| int i; | |
| u32 s_ssid; | |
| for (i = 0; i < request->n_ssids; i++) { | |
| /* wildcard ssid in the scan request */ | |
| if (!request->ssids[i].ssid_len) { | |
| if (ap->multi_bss && !ap->transmitted_bssid) | |
| continue; | |
| return true; | |
| } | |
| if (ap->ssid_len && | |
| ap->ssid_len == request->ssids[i].ssid_len) { | |
| if (!memcmp(request->ssids[i].ssid, ap->ssid, | |
| ap->ssid_len)) | |
| return true; | |
| } else if (ap->short_ssid_valid) { | |
| s_ssid = ~crc32_le(~0, request->ssids[i].ssid, | |
| request->ssids[i].ssid_len); | |
| if (ap->short_ssid == s_ssid) | |
| return true; | |
| } | |
| } | |
| return false; | |
| } | |
| static int cfg80211_scan_6ghz(struct cfg80211_registered_device *rdev, | |
| bool first_part) | |
| { | |
| u8 i; | |
| struct cfg80211_colocated_ap *ap; | |
| int n_channels, count = 0, err; | |
| struct cfg80211_scan_request_int *request, *rdev_req = rdev->scan_req; | |
| LIST_HEAD(coloc_ap_list); | |
| bool need_scan_psc = true; | |
| const struct ieee80211_sband_iftype_data *iftd; | |
| size_t size, offs_ssids, offs_6ghz_params, offs_ies; | |
| rdev_req->req.scan_6ghz = true; | |
| rdev_req->req.first_part = first_part; | |
| if (!rdev->wiphy.bands[NL80211_BAND_6GHZ]) | |
| return -EOPNOTSUPP; | |
| iftd = ieee80211_get_sband_iftype_data(rdev->wiphy.bands[NL80211_BAND_6GHZ], | |
| rdev_req->req.wdev->iftype); | |
| if (!iftd || !iftd->he_cap.has_he) | |
| return -EOPNOTSUPP; | |
| n_channels = rdev->wiphy.bands[NL80211_BAND_6GHZ]->n_channels; | |
| if (rdev_req->req.flags & NL80211_SCAN_FLAG_COLOCATED_6GHZ) { | |
| struct cfg80211_internal_bss *intbss; | |
| spin_lock_bh(&rdev->bss_lock); | |
| list_for_each_entry(intbss, &rdev->bss_list, list) { | |
| struct cfg80211_bss *res = &intbss->pub; | |
| const struct cfg80211_bss_ies *ies; | |
| const struct element *ssid_elem; | |
| struct cfg80211_colocated_ap *entry; | |
| u32 s_ssid_tmp; | |
| int ret; | |
| ies = rcu_access_pointer(res->ies); | |
| count += cfg80211_parse_colocated_ap(ies, | |
| &coloc_ap_list); | |
| /* In case the scan request specified a specific BSSID | |
| * and the BSS is found and operating on 6GHz band then | |
| * add this AP to the collocated APs list. | |
| * This is relevant for ML probe requests when the lower | |
| * band APs have not been discovered. | |
| */ | |
| if (is_broadcast_ether_addr(rdev_req->req.bssid) || | |
| !ether_addr_equal(rdev_req->req.bssid, res->bssid) || | |
| res->channel->band != NL80211_BAND_6GHZ) | |
| continue; | |
| ret = cfg80211_calc_short_ssid(ies, &ssid_elem, | |
| &s_ssid_tmp); | |
| if (ret) | |
| continue; | |
| entry = kzalloc_obj(*entry, GFP_ATOMIC); | |
| if (!entry) | |
| continue; | |
| memcpy(entry->bssid, res->bssid, ETH_ALEN); | |
| entry->short_ssid = s_ssid_tmp; | |
| memcpy(entry->ssid, ssid_elem->data, | |
| ssid_elem->datalen); | |
| entry->ssid_len = ssid_elem->datalen; | |
| entry->short_ssid_valid = true; | |
| entry->center_freq = res->channel->center_freq; | |
| list_add_tail(&entry->list, &coloc_ap_list); | |
| count++; | |
| } | |
| spin_unlock_bh(&rdev->bss_lock); | |
| } | |
| size = struct_size(request, req.channels, n_channels); | |
| offs_ssids = size; | |
| size += sizeof(*request->req.ssids) * rdev_req->req.n_ssids; | |
| offs_6ghz_params = size; | |
| size += sizeof(*request->req.scan_6ghz_params) * count; | |
| offs_ies = size; | |
| size += rdev_req->req.ie_len; | |
| request = kzalloc(size, GFP_KERNEL); | |
| if (!request) { | |
| cfg80211_free_coloc_ap_list(&coloc_ap_list); | |
| return -ENOMEM; | |
| } | |
| *request = *rdev_req; | |
| request->req.n_channels = 0; | |
| request->req.n_6ghz_params = 0; | |
| if (rdev_req->req.n_ssids) { | |
| /* | |
| * Add the ssids from the parent scan request to the new | |
| * scan request, so the driver would be able to use them | |
| * in its probe requests to discover hidden APs on PSC | |
| * channels. | |
| */ | |
| request->req.ssids = (void *)request + offs_ssids; | |
| memcpy(request->req.ssids, rdev_req->req.ssids, | |
| sizeof(*request->req.ssids) * request->req.n_ssids); | |
| } | |
| request->req.scan_6ghz_params = (void *)request + offs_6ghz_params; | |
| if (rdev_req->req.ie_len) { | |
| void *ie = (void *)request + offs_ies; | |
| memcpy(ie, rdev_req->req.ie, rdev_req->req.ie_len); | |
| request->req.ie = ie; | |
| } | |
| /* | |
| * PSC channels should not be scanned in case of direct scan with 1 SSID | |
| * and at least one of the reported co-located APs with same SSID | |
| * indicating that all APs in the same ESS are co-located | |
| */ | |
| if (count && | |
| request->req.n_ssids == 1 && | |
| request->req.ssids[0].ssid_len) { | |
| list_for_each_entry(ap, &coloc_ap_list, list) { | |
| if (ap->colocated_ess && | |
| cfg80211_find_ssid_match(ap, &request->req)) { | |
| need_scan_psc = false; | |
| break; | |
| } | |
| } | |
| } | |
| /* | |
| * add to the scan request the channels that need to be scanned | |
| * regardless of the collocated APs (PSC channels or all channels | |
| * in case that NL80211_SCAN_FLAG_COLOCATED_6GHZ is not set) | |
| */ | |
| for (i = 0; i < rdev_req->req.n_channels; i++) { | |
| if (rdev_req->req.channels[i]->band == NL80211_BAND_6GHZ && | |
| ((need_scan_psc && | |
| cfg80211_channel_is_psc(rdev_req->req.channels[i])) || | |
| !(rdev_req->req.flags & NL80211_SCAN_FLAG_COLOCATED_6GHZ))) { | |
| cfg80211_scan_req_add_chan(&request->req, | |
| rdev_req->req.channels[i], | |
| false); | |
| } | |
| } | |
| if (!(rdev_req->req.flags & NL80211_SCAN_FLAG_COLOCATED_6GHZ)) | |
| goto skip; | |
| list_for_each_entry(ap, &coloc_ap_list, list) { | |
| bool found = false; | |
| struct cfg80211_scan_6ghz_params *scan_6ghz_params = | |
| &request->req.scan_6ghz_params[request->req.n_6ghz_params]; | |
| struct ieee80211_channel *chan = | |
| ieee80211_get_channel(&rdev->wiphy, ap->center_freq); | |
| if (!chan || chan->flags & IEEE80211_CHAN_DISABLED || | |
| !cfg80211_wdev_channel_allowed(rdev_req->req.wdev, chan)) | |
| continue; | |
| for (i = 0; i < rdev_req->req.n_channels; i++) { | |
| if (rdev_req->req.channels[i] == chan) | |
| found = true; | |
| } | |
| if (!found) | |
| continue; | |
| if (request->req.n_ssids > 0 && | |
| !cfg80211_find_ssid_match(ap, &request->req)) | |
| continue; | |
| if (!is_broadcast_ether_addr(request->req.bssid) && | |
| !ether_addr_equal(request->req.bssid, ap->bssid)) | |
| continue; | |
| if (!request->req.n_ssids && ap->multi_bss && | |
| !ap->transmitted_bssid) | |
| continue; | |
| cfg80211_scan_req_add_chan(&request->req, chan, true); | |
| memcpy(scan_6ghz_params->bssid, ap->bssid, ETH_ALEN); | |
| scan_6ghz_params->short_ssid = ap->short_ssid; | |
| scan_6ghz_params->short_ssid_valid = ap->short_ssid_valid; | |
| scan_6ghz_params->unsolicited_probe = ap->unsolicited_probe; | |
| scan_6ghz_params->psd_20 = ap->psd_20; | |
| /* | |
| * If a PSC channel is added to the scan and 'need_scan_psc' is | |
| * set to false, then all the APs that the scan logic is | |
| * interested with on the channel are collocated and thus there | |
| * is no need to perform the initial PSC channel listen. | |
| */ | |
| if (cfg80211_channel_is_psc(chan) && !need_scan_psc) | |
| scan_6ghz_params->psc_no_listen = true; | |
| request->req.n_6ghz_params++; | |
| } | |
| skip: | |
| cfg80211_free_coloc_ap_list(&coloc_ap_list); | |
| if (request->req.n_channels) { | |
| struct cfg80211_scan_request_int *old = rdev->int_scan_req; | |
| rdev->int_scan_req = request; | |
| /* | |
| * If this scan follows a previous scan, save the scan start | |
| * info from the first part of the scan | |
| */ | |
| if (!first_part && !WARN_ON(!old)) | |
| rdev->int_scan_req->info = old->info; | |
| err = rdev_scan(rdev, request); | |
| if (err) { | |
| rdev->int_scan_req = old; | |
| kfree(request); | |
| } else { | |
| kfree(old); | |
| } | |
| return err; | |
| } | |
| kfree(request); | |
| return -EINVAL; | |
| } | |
| int cfg80211_scan(struct cfg80211_registered_device *rdev) | |
| { | |
| struct cfg80211_scan_request_int *request; | |
| struct cfg80211_scan_request_int *rdev_req = rdev->scan_req; | |
| u32 n_channels = 0, idx, i; | |
| int err; | |
| if (!(rdev->wiphy.flags & WIPHY_FLAG_SPLIT_SCAN_6GHZ)) { | |
| rdev_req->req.first_part = true; | |
| return rdev_scan(rdev, rdev_req); | |
| } | |
| for (i = 0; i < rdev_req->req.n_channels; i++) { | |
| if (rdev_req->req.channels[i]->band != NL80211_BAND_6GHZ) | |
| n_channels++; | |
| } | |
| if (!n_channels) | |
| return cfg80211_scan_6ghz(rdev, true); | |
| request = kzalloc_flex(*request, req.channels, n_channels); | |
| if (!request) | |
| return -ENOMEM; | |
| *request = *rdev_req; | |
| request->req.n_channels = n_channels; | |
| for (i = idx = 0; i < rdev_req->req.n_channels; i++) { | |
| if (rdev_req->req.channels[i]->band != NL80211_BAND_6GHZ) | |
| request->req.channels[idx++] = | |
| rdev_req->req.channels[i]; | |
| } | |
| rdev_req->req.scan_6ghz = false; | |
| rdev_req->req.first_part = true; | |
| err = rdev_scan(rdev, request); | |
| if (err) { | |
| kfree(request); | |
| return err; | |
| } | |
| rdev->int_scan_req = request; | |
| return 0; | |
| } | |
| void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, | |
| bool send_message) | |
| { | |
| struct cfg80211_scan_request_int *request, *rdev_req; | |
| struct wireless_dev *wdev; | |
| struct sk_buff *msg; | |
| #ifdef CONFIG_CFG80211_WEXT | |
| union iwreq_data wrqu; | |
| #endif | |
| lockdep_assert_held(&rdev->wiphy.mtx); | |
| if (rdev->scan_msg) { | |
| nl80211_send_scan_msg(rdev, rdev->scan_msg); | |
| rdev->scan_msg = NULL; | |
| return; | |
| } | |
| rdev_req = rdev->scan_req; | |
| if (!rdev_req) | |
| return; | |
| wdev = rdev_req->req.wdev; | |
| request = rdev->int_scan_req ? rdev->int_scan_req : rdev_req; | |
| if (wdev_running(wdev) && | |
| (rdev->wiphy.flags & WIPHY_FLAG_SPLIT_SCAN_6GHZ) && | |
| !rdev_req->req.scan_6ghz && !request->info.aborted && | |
| !cfg80211_scan_6ghz(rdev, false)) | |
| return; | |
| /* | |
| * This must be before sending the other events! | |
| * Otherwise, wpa_supplicant gets completely confused with | |
| * wext events. | |
| */ | |
| if (wdev->netdev) | |
| cfg80211_sme_scan_done(wdev->netdev); | |
| if (!request->info.aborted && | |
| request->req.flags & NL80211_SCAN_FLAG_FLUSH) { | |
| /* flush entries from previous scans */ | |
| spin_lock_bh(&rdev->bss_lock); | |
| __cfg80211_bss_expire(rdev, request->req.scan_start); | |
| spin_unlock_bh(&rdev->bss_lock); | |
| } | |
| msg = nl80211_build_scan_msg(rdev, wdev, request->info.aborted); | |
| #ifdef CONFIG_CFG80211_WEXT | |
| if (wdev->netdev && !request->info.aborted) { | |
| memset(&wrqu, 0, sizeof(wrqu)); | |
| wireless_send_event(wdev->netdev, SIOCGIWSCAN, &wrqu, NULL); | |
| } | |
| #endif | |
| dev_put(wdev->netdev); | |
| kfree(rdev->int_scan_req); | |
| rdev->int_scan_req = NULL; | |
| kfree(rdev->scan_req); | |
| rdev->scan_req = NULL; | |
| if (!send_message) | |
| rdev->scan_msg = msg; | |
| else | |
| nl80211_send_scan_msg(rdev, msg); | |
| } | |
| void __cfg80211_scan_done(struct wiphy *wiphy, struct wiphy_work *wk) | |
| { | |
| ___cfg80211_scan_done(wiphy_to_rdev(wiphy), true); | |
| } | |
| void cfg80211_scan_done(struct cfg80211_scan_request *request, | |
| struct cfg80211_scan_info *info) | |
| { | |
| struct cfg80211_scan_request_int *intreq = | |
| container_of(request, struct cfg80211_scan_request_int, req); | |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(request->wiphy); | |
| struct cfg80211_scan_info old_info = intreq->info; | |
| trace_cfg80211_scan_done(intreq, info); | |
| WARN_ON(intreq != rdev->scan_req && | |
| intreq != rdev->int_scan_req); | |
| intreq->info = *info; | |
| /* | |
| * In case the scan is split, the scan_start_tsf and tsf_bssid should | |
| * be of the first part. In such a case old_info.scan_start_tsf should | |
| * be non zero. | |
| */ | |
| if (request->scan_6ghz && old_info.scan_start_tsf) { | |
| intreq->info.scan_start_tsf = old_info.scan_start_tsf; | |
| memcpy(intreq->info.tsf_bssid, old_info.tsf_bssid, | |
| sizeof(intreq->info.tsf_bssid)); | |
| } | |
| intreq->notified = true; | |
| wiphy_work_queue(request->wiphy, &rdev->scan_done_wk); | |
| } | |
| EXPORT_SYMBOL(cfg80211_scan_done); | |
| void cfg80211_add_sched_scan_req(struct cfg80211_registered_device *rdev, | |
| struct cfg80211_sched_scan_request *req) | |
| { | |
| lockdep_assert_held(&rdev->wiphy.mtx); | |
| list_add_rcu(&req->list, &rdev->sched_scan_req_list); | |
| } | |
| static void cfg80211_del_sched_scan_req(struct cfg80211_registered_device *rdev, | |
| struct cfg80211_sched_scan_request *req) | |
| { | |
| lockdep_assert_held(&rdev->wiphy.mtx); | |
| list_del_rcu(&req->list); | |
| kfree_rcu(req, rcu_head); | |
| } | |
| static struct cfg80211_sched_scan_request * | |
| cfg80211_find_sched_scan_req(struct cfg80211_registered_device *rdev, u64 reqid) | |
| { | |
| struct cfg80211_sched_scan_request *pos; | |
| list_for_each_entry_rcu(pos, &rdev->sched_scan_req_list, list, | |
| lockdep_is_held(&rdev->wiphy.mtx)) { | |
| if (pos->reqid == reqid) | |
| return pos; | |
| } | |
| return NULL; | |
| } | |
| /* | |
| * Determines if a scheduled scan request can be handled. When a legacy | |
| * scheduled scan is running no other scheduled scan is allowed regardless | |
| * whether the request is for legacy or multi-support scan. When a multi-support | |
| * scheduled scan is running a request for legacy scan is not allowed. In this | |
| * case a request for multi-support scan can be handled if resources are | |
| * available, ie. struct wiphy::max_sched_scan_reqs limit is not yet reached. | |
| */ | |
| int cfg80211_sched_scan_req_possible(struct cfg80211_registered_device *rdev, | |
| bool want_multi) | |
| { | |
| struct cfg80211_sched_scan_request *pos; | |
| int i = 0; | |
| list_for_each_entry(pos, &rdev->sched_scan_req_list, list) { | |
| /* request id zero means legacy in progress */ | |
| if (!i && !pos->reqid) | |
| return -EINPROGRESS; | |
| i++; | |
| } | |
| if (i) { | |
| /* no legacy allowed when multi request(s) are active */ | |
| if (!want_multi) | |
| return -EINPROGRESS; | |
| /* resource limit reached */ | |
| if (i == rdev->wiphy.max_sched_scan_reqs) | |
| return -ENOSPC; | |
| } | |
| return 0; | |
| } | |
| void cfg80211_sched_scan_results_wk(struct work_struct *work) | |
| { | |
| struct cfg80211_registered_device *rdev; | |
| struct cfg80211_sched_scan_request *req, *tmp; | |
| rdev = container_of(work, struct cfg80211_registered_device, | |
| sched_scan_res_wk); | |
| guard(wiphy)(&rdev->wiphy); | |
| list_for_each_entry_safe(req, tmp, &rdev->sched_scan_req_list, list) { | |
| if (req->report_results) { | |
| req->report_results = false; | |
| if (req->flags & NL80211_SCAN_FLAG_FLUSH) { | |
| /* flush entries from previous scans */ | |
| spin_lock_bh(&rdev->bss_lock); | |
| __cfg80211_bss_expire(rdev, req->scan_start); | |
| spin_unlock_bh(&rdev->bss_lock); | |
| req->scan_start = jiffies; | |
| } | |
| nl80211_send_sched_scan(req, | |
| NL80211_CMD_SCHED_SCAN_RESULTS); | |
| } | |
| } | |
| } | |
| void cfg80211_sched_scan_results(struct wiphy *wiphy, u64 reqid) | |
| { | |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | |
| struct cfg80211_sched_scan_request *request; | |
| trace_cfg80211_sched_scan_results(wiphy, reqid); | |
| /* ignore if we're not scanning */ | |
| rcu_read_lock(); | |
| request = cfg80211_find_sched_scan_req(rdev, reqid); | |
| if (request) { | |
| request->report_results = true; | |
| queue_work(cfg80211_wq, &rdev->sched_scan_res_wk); | |
| } | |
| rcu_read_unlock(); | |
| } | |
| EXPORT_SYMBOL(cfg80211_sched_scan_results); | |
| void cfg80211_sched_scan_stopped_locked(struct wiphy *wiphy, u64 reqid) | |
| { | |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | |
| lockdep_assert_held(&wiphy->mtx); | |
| trace_cfg80211_sched_scan_stopped(wiphy, reqid); | |
| __cfg80211_stop_sched_scan(rdev, reqid, true); | |
| } | |
| EXPORT_SYMBOL(cfg80211_sched_scan_stopped_locked); | |
| void cfg80211_sched_scan_stopped(struct wiphy *wiphy, u64 reqid) | |
| { | |
| guard(wiphy)(wiphy); | |
| cfg80211_sched_scan_stopped_locked(wiphy, reqid); | |
| } | |
| EXPORT_SYMBOL(cfg80211_sched_scan_stopped); | |
| int cfg80211_stop_sched_scan_req(struct cfg80211_registered_device *rdev, | |
| struct cfg80211_sched_scan_request *req, | |
| bool driver_initiated) | |
| { | |
| lockdep_assert_held(&rdev->wiphy.mtx); | |
| if (!driver_initiated) { | |
| int err = rdev_sched_scan_stop(rdev, req->dev, req->reqid); | |
| if (err) | |
| return err; | |
| } | |
| nl80211_send_sched_scan(req, NL80211_CMD_SCHED_SCAN_STOPPED); | |
| cfg80211_del_sched_scan_req(rdev, req); | |
| return 0; | |
| } | |
| int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev, | |
| u64 reqid, bool driver_initiated) | |
| { | |
| struct cfg80211_sched_scan_request *sched_scan_req; | |
| lockdep_assert_held(&rdev->wiphy.mtx); | |
| sched_scan_req = cfg80211_find_sched_scan_req(rdev, reqid); | |
| if (!sched_scan_req) | |
| return -ENOENT; | |
| return cfg80211_stop_sched_scan_req(rdev, sched_scan_req, | |
| driver_initiated); | |
| } | |
| void cfg80211_bss_age(struct cfg80211_registered_device *rdev, | |
| unsigned long age_secs) | |
| { | |
| struct cfg80211_internal_bss *bss; | |
| unsigned long age_jiffies = secs_to_jiffies(age_secs); | |
| spin_lock_bh(&rdev->bss_lock); | |
| list_for_each_entry(bss, &rdev->bss_list, list) | |
| bss->ts -= age_jiffies; | |
| spin_unlock_bh(&rdev->bss_lock); | |
| } | |
| void cfg80211_bss_expire(struct cfg80211_registered_device *rdev) | |
| { | |
| __cfg80211_bss_expire(rdev, jiffies - IEEE80211_SCAN_RESULT_EXPIRE); | |
| } | |
| void cfg80211_bss_flush(struct wiphy *wiphy) | |
| { | |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | |
| spin_lock_bh(&rdev->bss_lock); | |
| __cfg80211_bss_expire(rdev, jiffies); | |
| spin_unlock_bh(&rdev->bss_lock); | |
| } | |
| EXPORT_SYMBOL(cfg80211_bss_flush); | |
| const struct element * | |
| cfg80211_find_elem_match(u8 eid, const u8 *ies, unsigned int len, | |
| const u8 *match, unsigned int match_len, | |
| unsigned int match_offset) | |
| { | |
| const struct element *elem; | |
| for_each_element_id(elem, eid, ies, len) { | |
| if (elem->datalen >= match_offset + match_len && | |
| !memcmp(elem->data + match_offset, match, match_len)) | |
| return elem; | |
| } | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL(cfg80211_find_elem_match); | |
| const struct element *cfg80211_find_vendor_elem(unsigned int oui, int oui_type, | |
| const u8 *ies, | |
| unsigned int len) | |
| { | |
| const struct element *elem; | |
| u8 match[] = { oui >> 16, oui >> 8, oui, oui_type }; | |
| int match_len = (oui_type < 0) ? 3 : sizeof(match); | |
| if (WARN_ON(oui_type > 0xff)) | |
| return NULL; | |
| elem = cfg80211_find_elem_match(WLAN_EID_VENDOR_SPECIFIC, ies, len, | |
| match, match_len, 0); | |
| if (!elem || elem->datalen < 4) | |
| return NULL; | |
| return elem; | |
| } | |
| EXPORT_SYMBOL(cfg80211_find_vendor_elem); | |
| /** | |
| * enum bss_compare_mode - BSS compare mode | |
| * @BSS_CMP_REGULAR: regular compare mode (for insertion and normal find) | |
| * @BSS_CMP_HIDE_ZLEN: find hidden SSID with zero-length mode | |
| * @BSS_CMP_HIDE_NUL: find hidden SSID with NUL-ed out mode | |
| */ | |
| enum bss_compare_mode { | |
| BSS_CMP_REGULAR, | |
| BSS_CMP_HIDE_ZLEN, | |
| BSS_CMP_HIDE_NUL, | |
| }; | |
| static int cmp_bss(struct cfg80211_bss *a, | |
| struct cfg80211_bss *b, | |
| enum bss_compare_mode mode) | |
| { | |
| const struct cfg80211_bss_ies *a_ies, *b_ies; | |
| const u8 *ie1 = NULL; | |
| const u8 *ie2 = NULL; | |
| int i, r; | |
| if (a->channel != b->channel) | |
| return (b->channel->center_freq * 1000 + b->channel->freq_offset) - | |
| (a->channel->center_freq * 1000 + a->channel->freq_offset); | |
| a_ies = rcu_access_pointer(a->ies); | |
| if (!a_ies) | |
| return -1; | |
| b_ies = rcu_access_pointer(b->ies); | |
| if (!b_ies) | |
| return 1; | |
| if (WLAN_CAPABILITY_IS_STA_BSS(a->capability)) | |
| ie1 = cfg80211_find_ie(WLAN_EID_MESH_ID, | |
| a_ies->data, a_ies->len); | |
| if (WLAN_CAPABILITY_IS_STA_BSS(b->capability)) | |
| ie2 = cfg80211_find_ie(WLAN_EID_MESH_ID, | |
| b_ies->data, b_ies->len); | |
| if (ie1 && ie2) { | |
| int mesh_id_cmp; | |
| if (ie1[1] == ie2[1]) | |
| mesh_id_cmp = memcmp(ie1 + 2, ie2 + 2, ie1[1]); | |
| else | |
| mesh_id_cmp = ie2[1] - ie1[1]; | |
| ie1 = cfg80211_find_ie(WLAN_EID_MESH_CONFIG, | |
| a_ies->data, a_ies->len); | |
| ie2 = cfg80211_find_ie(WLAN_EID_MESH_CONFIG, | |
| b_ies->data, b_ies->len); | |
| if (ie1 && ie2) { | |
| if (mesh_id_cmp) | |
| return mesh_id_cmp; | |
| if (ie1[1] != ie2[1]) | |
| return ie2[1] - ie1[1]; | |
| return memcmp(ie1 + 2, ie2 + 2, ie1[1]); | |
| } | |
| } | |
| r = memcmp(a->bssid, b->bssid, sizeof(a->bssid)); | |
| if (r) | |
| return r; | |
| ie1 = cfg80211_find_ie(WLAN_EID_SSID, a_ies->data, a_ies->len); | |
| ie2 = cfg80211_find_ie(WLAN_EID_SSID, b_ies->data, b_ies->len); | |
| if (!ie1 && !ie2) | |
| return 0; | |
| /* | |
| * Note that with "hide_ssid", the function returns a match if | |
| * the already-present BSS ("b") is a hidden SSID beacon for | |
| * the new BSS ("a"). | |
| */ | |
| /* sort missing IE before (left of) present IE */ | |
| if (!ie1) | |
| return -1; | |
| if (!ie2) | |
| return 1; | |
| switch (mode) { | |
| case BSS_CMP_HIDE_ZLEN: | |
| /* | |
| * In ZLEN mode we assume the BSS entry we're | |
| * looking for has a zero-length SSID. So if | |
| * the one we're looking at right now has that, | |
| * return 0. Otherwise, return the difference | |
| * in length, but since we're looking for the | |
| * 0-length it's really equivalent to returning | |
| * the length of the one we're looking at. | |
| * | |
| * No content comparison is needed as we assume | |
| * the content length is zero. | |
| */ | |
| return ie2[1]; | |
| case BSS_CMP_REGULAR: | |
| default: | |
| /* sort by length first, then by contents */ | |
| if (ie1[1] != ie2[1]) | |
| return ie2[1] - ie1[1]; | |
| return memcmp(ie1 + 2, ie2 + 2, ie1[1]); | |
| case BSS_CMP_HIDE_NUL: | |
| if (ie1[1] != ie2[1]) | |
| return ie2[1] - ie1[1]; | |
| /* this is equivalent to memcmp(zeroes, ie2 + 2, len) */ | |
| for (i = 0; i < ie2[1]; i++) | |
| if (ie2[i + 2]) | |
| return -1; | |
| return 0; | |
| } | |
| } | |
| static bool cfg80211_bss_type_match(u16 capability, | |
| enum nl80211_band band, | |
| enum ieee80211_bss_type bss_type) | |
| { | |
| bool ret = true; | |
| u16 mask, val; | |
| if (bss_type == IEEE80211_BSS_TYPE_ANY) | |
| return ret; | |
| if (band == NL80211_BAND_60GHZ) { | |
| mask = WLAN_CAPABILITY_DMG_TYPE_MASK; | |
| switch (bss_type) { | |
| case IEEE80211_BSS_TYPE_ESS: | |
| val = WLAN_CAPABILITY_DMG_TYPE_AP; | |
| break; | |
| case IEEE80211_BSS_TYPE_PBSS: | |
| val = WLAN_CAPABILITY_DMG_TYPE_PBSS; | |
| break; | |
| case IEEE80211_BSS_TYPE_IBSS: | |
| val = WLAN_CAPABILITY_DMG_TYPE_IBSS; | |
| break; | |
| default: | |
| return false; | |
| } | |
| } else { | |
| mask = WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS; | |
| switch (bss_type) { | |
| case IEEE80211_BSS_TYPE_ESS: | |
| val = WLAN_CAPABILITY_ESS; | |
| break; | |
| case IEEE80211_BSS_TYPE_IBSS: | |
| val = WLAN_CAPABILITY_IBSS; | |
| break; | |
| case IEEE80211_BSS_TYPE_MBSS: | |
| val = 0; | |
| break; | |
| default: | |
| return false; | |
| } | |
| } | |
| ret = ((capability & mask) == val); | |
| return ret; | |
| } | |
| /* Returned bss is reference counted and must be cleaned up appropriately. */ | |
| struct cfg80211_bss *__cfg80211_get_bss(struct wiphy *wiphy, | |
| struct ieee80211_channel *channel, | |
| const u8 *bssid, | |
| const u8 *ssid, size_t ssid_len, | |
| enum ieee80211_bss_type bss_type, | |
| enum ieee80211_privacy privacy, | |
| u32 use_for, | |
| struct netlink_ext_ack *extack) | |
| { | |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | |
| struct cfg80211_internal_bss *bss, *res = NULL; | |
| bool expired = false, unusable = false; | |
| unsigned long now = jiffies; | |
| int bss_privacy; | |
| trace_cfg80211_get_bss(wiphy, channel, bssid, ssid, ssid_len, bss_type, | |
| privacy); | |
| spin_lock_bh(&rdev->bss_lock); | |
| list_for_each_entry(bss, &rdev->bss_list, list) { | |
| if (!cfg80211_bss_type_match(bss->pub.capability, | |
| bss->pub.channel->band, bss_type)) | |
| continue; | |
| bss_privacy = (bss->pub.capability & WLAN_CAPABILITY_PRIVACY); | |
| if ((privacy == IEEE80211_PRIVACY_ON && !bss_privacy) || | |
| (privacy == IEEE80211_PRIVACY_OFF && bss_privacy)) | |
| continue; | |
| if (channel && bss->pub.channel != channel) | |
| continue; | |
| if (!is_valid_ether_addr(bss->pub.bssid)) | |
| continue; | |
| if (!is_bss(&bss->pub, bssid, ssid, ssid_len)) | |
| continue; | |
| /* | |
| * The identity checks above must all come first so that | |
| * the expired/unusable classification below only ever | |
| * applies to entries that actually match the request. | |
| */ | |
| /* Don't get expired BSS structs */ | |
| if (time_after(now, bss->ts + IEEE80211_SCAN_RESULT_EXPIRE) && | |
| !atomic_read(&bss->hold)) { | |
| expired = true; | |
| continue; | |
| } | |
| if ((bss->pub.use_for & use_for) != use_for) { | |
| unusable = true; | |
| continue; | |
| } | |
| res = bss; | |
| bss_ref_get(rdev, res); | |
| break; | |
| } | |
| spin_unlock_bh(&rdev->bss_lock); | |
| if (!res) { | |
| if (expired && unusable) | |
| NL_SET_ERR_MSG(extack, | |
| "BSS entries are expired or cannot be used for the requested operation"); | |
| else if (unusable) | |
| NL_SET_ERR_MSG(extack, | |
| "BSS cannot be used for the requested operation"); | |
| else if (expired) | |
| NL_SET_ERR_MSG(extack, | |
| "BSS entry in scan results is expired"); | |
| else | |
| NL_SET_ERR_MSG(extack, | |
| "BSS not found in scan results"); | |
| return NULL; | |
| } | |
| trace_cfg80211_return_bss(&res->pub); | |
| return &res->pub; | |
| } | |
| EXPORT_SYMBOL(__cfg80211_get_bss); | |
| static bool rb_insert_bss(struct cfg80211_registered_device *rdev, | |
| struct cfg80211_internal_bss *bss) | |
| { | |
| struct rb_node **p = &rdev->bss_tree.rb_node; | |
| struct rb_node *parent = NULL; | |
| struct cfg80211_internal_bss *tbss; | |
| int cmp; | |
| while (*p) { | |
| parent = *p; | |
| tbss = rb_entry(parent, struct cfg80211_internal_bss, rbn); | |
| cmp = cmp_bss(&bss->pub, &tbss->pub, BSS_CMP_REGULAR); | |
| if (WARN_ON(!cmp)) { | |
| /* will sort of leak this BSS */ | |
| return false; | |
| } | |
| if (cmp < 0) | |
| p = &(*p)->rb_left; | |
| else | |
| p = &(*p)->rb_right; | |
| } | |
| rb_link_node(&bss->rbn, parent, p); | |
| rb_insert_color(&bss->rbn, &rdev->bss_tree); | |
| return true; | |
| } | |
| static struct cfg80211_internal_bss * | |
| rb_find_bss(struct cfg80211_registered_device *rdev, | |
| struct cfg80211_internal_bss *res, | |
| enum bss_compare_mode mode) | |
| { | |
| struct rb_node *n = rdev->bss_tree.rb_node; | |
| struct cfg80211_internal_bss *bss; | |
| int r; | |
| while (n) { | |
| bss = rb_entry(n, struct cfg80211_internal_bss, rbn); | |
| r = cmp_bss(&res->pub, &bss->pub, mode); | |
| if (r == 0) | |
| return bss; | |
| else if (r < 0) | |
| n = n->rb_left; | |
| else | |
| n = n->rb_right; | |
| } | |
| return NULL; | |
| } | |
| static void cfg80211_insert_bss(struct cfg80211_registered_device *rdev, | |
| struct cfg80211_internal_bss *bss) | |
| { | |
| lockdep_assert_held(&rdev->bss_lock); | |
| if (!rb_insert_bss(rdev, bss)) | |
| return; | |
| list_add_tail(&bss->list, &rdev->bss_list); | |
| rdev->bss_entries++; | |
| } | |
| static void cfg80211_rehash_bss(struct cfg80211_registered_device *rdev, | |
| struct cfg80211_internal_bss *bss) | |
| { | |
| lockdep_assert_held(&rdev->bss_lock); | |
| rb_erase(&bss->rbn, &rdev->bss_tree); | |
| if (!rb_insert_bss(rdev, bss)) { | |
| list_del(&bss->list); | |
| if (!list_empty(&bss->hidden_list)) | |
| list_del_init(&bss->hidden_list); | |
| if (!list_empty(&bss->pub.nontrans_list)) | |
| list_del_init(&bss->pub.nontrans_list); | |
| rdev->bss_entries--; | |
| } | |
| rdev->bss_generation++; | |
| } | |
| static bool cfg80211_combine_bsses(struct cfg80211_registered_device *rdev, | |
| struct cfg80211_internal_bss *new) | |
| { | |
| const struct cfg80211_bss_ies *ies; | |
| struct cfg80211_internal_bss *bss; | |
| const u8 *ie; | |
| int i, ssidlen; | |
| u8 fold = 0; | |
| u32 n_entries = 0; | |
| ies = rcu_access_pointer(new->pub.beacon_ies); | |
| if (WARN_ON(!ies)) | |
| return false; | |
| ie = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len); | |
| if (!ie) { | |
| /* nothing to do */ | |
| return true; | |
| } | |
| ssidlen = ie[1]; | |
| for (i = 0; i < ssidlen; i++) | |
| fold |= ie[2 + i]; | |
| if (fold) { | |
| /* not a hidden SSID */ | |
| return true; | |
| } | |
| /* This is the bad part ... */ | |
| list_for_each_entry(bss, &rdev->bss_list, list) { | |
| /* | |
| * we're iterating all the entries anyway, so take the | |
| * opportunity to validate the list length accounting | |
| */ | |
| n_entries++; | |
| if (!ether_addr_equal(bss->pub.bssid, new->pub.bssid)) | |
| continue; | |
| if (bss->pub.channel != new->pub.channel) | |
| continue; | |
| if (rcu_access_pointer(bss->pub.beacon_ies)) | |
| continue; | |
| ies = rcu_access_pointer(bss->pub.ies); | |
| if (!ies) | |
| continue; | |
| ie = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len); | |
| if (!ie) | |
| continue; | |
| if (ssidlen && ie[1] != ssidlen) | |
| continue; | |
| if (WARN_ON_ONCE(bss->pub.hidden_beacon_bss)) | |
| continue; | |
| if (WARN_ON_ONCE(!list_empty(&bss->hidden_list))) | |
| list_del(&bss->hidden_list); | |
| /* combine them */ | |
| list_add(&bss->hidden_list, &new->hidden_list); | |
| bss->pub.hidden_beacon_bss = &new->pub; | |
| new->refcount += bss->refcount; | |
| rcu_assign_pointer(bss->pub.beacon_ies, | |
| new->pub.beacon_ies); | |
| } | |
| WARN_ONCE(n_entries != rdev->bss_entries, | |
| "rdev bss entries[%d]/list[len:%d] corruption\n", | |
| rdev->bss_entries, n_entries); | |
| return true; | |
| } | |
| static void cfg80211_update_hidden_bsses(struct cfg80211_internal_bss *known, | |
| const struct cfg80211_bss_ies *new_ies, | |
| const struct cfg80211_bss_ies *old_ies) | |
| { | |
| struct cfg80211_internal_bss *bss; | |
| /* Assign beacon IEs to all sub entries */ | |
| list_for_each_entry(bss, &known->hidden_list, hidden_list) { | |
| const struct cfg80211_bss_ies *ies; | |
| ies = rcu_access_pointer(bss->pub.beacon_ies); | |
| WARN_ON(ies != old_ies); | |
| rcu_assign_pointer(bss->pub.beacon_ies, new_ies); | |
| bss->ts = known->ts; | |
| bss->pub.ts_boottime = known->pub.ts_boottime; | |
| } | |
| } | |
| static void cfg80211_check_stuck_ecsa(struct cfg80211_registered_device *rdev, | |
| struct cfg80211_internal_bss *known, | |
| const struct cfg80211_bss_ies *old) | |
| { | |
| const struct ieee80211_ext_chansw_ie *ecsa; | |
| const struct element *elem_new, *elem_old; | |
| const struct cfg80211_bss_ies *new, *bcn; | |
| if (known->pub.proberesp_ecsa_stuck) | |
| return; | |
| new = rcu_dereference_protected(known->pub.proberesp_ies, | |
| lockdep_is_held(&rdev->bss_lock)); | |
| if (WARN_ON(!new)) | |
| return; | |
| if (new->tsf - old->tsf < USEC_PER_SEC) | |
| return; | |
| elem_old = cfg80211_find_elem(WLAN_EID_EXT_CHANSWITCH_ANN, | |
| old->data, old->len); | |
| if (!elem_old) | |
| return; | |
| elem_new = cfg80211_find_elem(WLAN_EID_EXT_CHANSWITCH_ANN, | |
| new->data, new->len); | |
| if (!elem_new) | |
| return; | |
| bcn = rcu_dereference_protected(known->pub.beacon_ies, | |
| lockdep_is_held(&rdev->bss_lock)); | |
| if (bcn && | |
| cfg80211_find_elem(WLAN_EID_EXT_CHANSWITCH_ANN, | |
| bcn->data, bcn->len)) | |
| return; | |
| if (elem_new->datalen != elem_old->datalen) | |
| return; | |
| if (elem_new->datalen < sizeof(struct ieee80211_ext_chansw_ie)) | |
| return; | |
| if (memcmp(elem_new->data, elem_old->data, elem_new->datalen)) | |
| return; | |
| ecsa = (void *)elem_new->data; | |
| if (!ecsa->mode) | |
| return; | |
| if (ecsa->new_ch_num != | |
| ieee80211_frequency_to_channel(known->pub.channel->center_freq)) | |
| return; | |
| known->pub.proberesp_ecsa_stuck = 1; | |
| } | |
| static bool | |
| cfg80211_update_known_bss(struct cfg80211_registered_device *rdev, | |
| struct cfg80211_internal_bss *known, | |
| struct cfg80211_internal_bss *new, | |
| bool signal_valid) | |
| { | |
| lockdep_assert_held(&rdev->bss_lock); | |
| /* Update time stamps */ | |
| known->ts = new->ts; | |
| known->pub.ts_boottime = new->pub.ts_boottime; | |
| /* Update IEs */ | |
| if (rcu_access_pointer(new->pub.proberesp_ies)) { | |
| const struct cfg80211_bss_ies *old; | |
| old = rcu_access_pointer(known->pub.proberesp_ies); | |
| rcu_assign_pointer(known->pub.proberesp_ies, | |
| new->pub.proberesp_ies); | |
| /* Override possible earlier Beacon frame IEs */ | |
| rcu_assign_pointer(known->pub.ies, | |
| new->pub.proberesp_ies); | |
| if (old) { | |
| cfg80211_check_stuck_ecsa(rdev, known, old); | |
| kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head); | |
| } | |
| } | |
| if (rcu_access_pointer(new->pub.beacon_ies)) { | |
| const struct cfg80211_bss_ies *old; | |
| if (known->pub.hidden_beacon_bss && | |
| !list_empty(&known->hidden_list)) { | |
| const struct cfg80211_bss_ies *f; | |
| /* The known BSS struct is one of the probe | |
| * response members of a group, but we're | |
| * receiving a beacon (beacon_ies in the new | |
| * bss is used). This can only mean that the | |
| * AP changed its beacon from not having an | |
| * SSID to showing it, which is confusing so | |
| * drop this information. | |
| */ | |
| f = rcu_access_pointer(new->pub.beacon_ies); | |
| if (!new->pub.hidden_beacon_bss) | |
| kfree_rcu((struct cfg80211_bss_ies *)f, rcu_head); | |
| return false; | |
| } | |
| old = rcu_access_pointer(known->pub.beacon_ies); | |
| rcu_assign_pointer(known->pub.beacon_ies, new->pub.beacon_ies); | |
| /* Override IEs if they were from a beacon before */ | |
| if (old == rcu_access_pointer(known->pub.ies)) | |
| rcu_assign_pointer(known->pub.ies, new->pub.beacon_ies); | |
| cfg80211_update_hidden_bsses(known, | |
| rcu_access_pointer(new->pub.beacon_ies), | |
| old); | |
| if (old) | |
| kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head); | |
| } | |
| known->pub.beacon_interval = new->pub.beacon_interval; | |
| /* don't update the signal if beacon was heard on | |
| * adjacent channel. | |
| */ | |
| if (signal_valid) | |
| known->pub.signal = new->pub.signal; | |
| known->pub.capability = new->pub.capability; | |
| known->parent_tsf = new->parent_tsf; | |
| known->pub.chains = new->pub.chains; | |
| memcpy(known->pub.chain_signal, new->pub.chain_signal, | |
| IEEE80211_MAX_CHAINS); | |
| ether_addr_copy(known->parent_bssid, new->parent_bssid); | |
| known->pub.max_bssid_indicator = new->pub.max_bssid_indicator; | |
| known->pub.bssid_index = new->pub.bssid_index; | |
| known->pub.use_for = new->pub.use_for; | |
| known->pub.cannot_use_reasons = new->pub.cannot_use_reasons; | |
| known->bss_source = new->bss_source; | |
| return true; | |
| } | |
| /* Returned bss is reference counted and must be cleaned up appropriately. */ | |
| static struct cfg80211_internal_bss * | |
| __cfg80211_bss_update(struct cfg80211_registered_device *rdev, | |
| struct cfg80211_internal_bss *tmp, | |
| bool signal_valid, unsigned long ts) | |
| { | |
| struct cfg80211_internal_bss *found = NULL; | |
| struct cfg80211_bss_ies *ies; | |
| if (WARN_ON(!tmp->pub.channel)) | |
| goto free_ies; | |
| tmp->ts = ts; | |
| if (WARN_ON(!rcu_access_pointer(tmp->pub.ies))) | |
| goto free_ies; | |
| found = rb_find_bss(rdev, tmp, BSS_CMP_REGULAR); | |
| if (found) { | |
| if (!cfg80211_update_known_bss(rdev, found, tmp, signal_valid)) | |
| return NULL; | |
| } else { | |
| struct cfg80211_internal_bss *new; | |
| struct cfg80211_internal_bss *hidden; | |
| /* | |
| * create a copy -- the "res" variable that is passed in | |
| * is allocated on the stack since it's not needed in the | |
| * more common case of an update | |
| */ | |
| new = kzalloc(sizeof(*new) + rdev->wiphy.bss_priv_size, | |
| GFP_ATOMIC); | |
| if (!new) | |
| goto free_ies; | |
| memcpy(new, tmp, sizeof(*new)); | |
| new->refcount = 1; | |
| INIT_LIST_HEAD(&new->hidden_list); | |
| INIT_LIST_HEAD(&new->pub.nontrans_list); | |
| /* we'll set this later if it was non-NULL */ | |
| new->pub.transmitted_bss = NULL; | |
| if (rcu_access_pointer(tmp->pub.proberesp_ies)) { | |
| hidden = rb_find_bss(rdev, tmp, BSS_CMP_HIDE_ZLEN); | |
| if (!hidden) | |
| hidden = rb_find_bss(rdev, tmp, | |
| BSS_CMP_HIDE_NUL); | |
| if (hidden) { | |
| new->pub.hidden_beacon_bss = &hidden->pub; | |
| list_add(&new->hidden_list, | |
| &hidden->hidden_list); | |
| hidden->refcount++; | |
| ies = (void *)rcu_access_pointer(new->pub.beacon_ies); | |
| rcu_assign_pointer(new->pub.beacon_ies, | |
| hidden->pub.beacon_ies); | |
| if (ies) | |
| kfree_rcu(ies, rcu_head); | |
| } | |
| } else { | |
| /* | |
| * Ok so we found a beacon, and don't have an entry. If | |
| * it's a beacon with hidden SSID, we might be in for an | |
| * expensive search for any probe responses that should | |
| * be grouped with this beacon for updates ... | |
| */ | |
| if (!cfg80211_combine_bsses(rdev, new)) { | |
| bss_ref_put(rdev, new); | |
| return NULL; | |
| } | |
| } | |
| if (rdev->bss_entries >= bss_entries_limit && | |
| !cfg80211_bss_expire_oldest(rdev)) { | |
| bss_ref_put(rdev, new); | |
| return NULL; | |
| } | |
| /* This must be before the call to bss_ref_get */ | |
| if (tmp->pub.transmitted_bss) { | |
| new->pub.transmitted_bss = tmp->pub.transmitted_bss; | |
| bss_ref_get(rdev, bss_from_pub(tmp->pub.transmitted_bss)); | |
| } | |
| cfg80211_insert_bss(rdev, new); | |
| found = new; | |
| } | |
| rdev->bss_generation++; | |
| bss_ref_get(rdev, found); | |
| return found; | |
| free_ies: | |
| ies = (void *)rcu_access_pointer(tmp->pub.beacon_ies); | |
| if (ies) | |
| kfree_rcu(ies, rcu_head); | |
| ies = (void *)rcu_access_pointer(tmp->pub.proberesp_ies); | |
| if (ies) | |
| kfree_rcu(ies, rcu_head); | |
| return NULL; | |
| } | |
| struct cfg80211_internal_bss * | |
| cfg80211_bss_update(struct cfg80211_registered_device *rdev, | |
| struct cfg80211_internal_bss *tmp, | |
| bool signal_valid, unsigned long ts) | |
| { | |
| struct cfg80211_internal_bss *res; | |
| spin_lock_bh(&rdev->bss_lock); | |
| res = __cfg80211_bss_update(rdev, tmp, signal_valid, ts); | |
| spin_unlock_bh(&rdev->bss_lock); | |
| return res; | |
| } | |
| int cfg80211_get_ies_channel_number(const u8 *ie, size_t ielen, | |
| enum nl80211_band band) | |
| { | |
| const struct element *tmp; | |
| if (band == NL80211_BAND_6GHZ) { | |
| struct ieee80211_he_operation *he_oper; | |
| tmp = cfg80211_find_ext_elem(WLAN_EID_EXT_HE_OPERATION, ie, | |
| ielen); | |
| if (tmp && tmp->datalen >= sizeof(*he_oper) && | |
| tmp->datalen >= ieee80211_he_oper_size(&tmp->data[1])) { | |
| const struct ieee80211_he_6ghz_oper *he_6ghz_oper; | |
| he_oper = (void *)&tmp->data[1]; | |
| he_6ghz_oper = ieee80211_he_6ghz_oper(he_oper); | |
| if (!he_6ghz_oper) | |
| return -1; | |
| return he_6ghz_oper->primary; | |
| } | |
| } else if (band == NL80211_BAND_S1GHZ) { | |
| tmp = cfg80211_find_elem(WLAN_EID_S1G_OPERATION, ie, ielen); | |
| if (tmp && tmp->datalen >= sizeof(struct ieee80211_s1g_oper_ie)) { | |
| struct ieee80211_s1g_oper_ie *s1gop = (void *)tmp->data; | |
| return s1gop->oper_ch; | |
| } | |
| } else { | |
| tmp = cfg80211_find_elem(WLAN_EID_DS_PARAMS, ie, ielen); | |
| if (tmp && tmp->datalen == 1) | |
| return tmp->data[0]; | |
| tmp = cfg80211_find_elem(WLAN_EID_HT_OPERATION, ie, ielen); | |
| if (tmp && | |
| tmp->datalen >= sizeof(struct ieee80211_ht_operation)) { | |
| struct ieee80211_ht_operation *htop = (void *)tmp->data; | |
| return htop->primary_chan; | |
| } | |
| } | |
| return -1; | |
| } | |
| EXPORT_SYMBOL(cfg80211_get_ies_channel_number); | |
| /* | |
| * Update RX channel information based on the available frame payload | |
| * information. This is mainly for the 2.4 GHz band where frames can be received | |
| * from neighboring channels and the Beacon frames use the DSSS Parameter Set | |
| * element to indicate the current (transmitting) channel, but this might also | |
| * be needed on other bands if RX frequency does not match with the actual | |
| * operating channel of a BSS, or if the AP reports a different primary channel. | |
| */ | |
| static struct ieee80211_channel * | |
| cfg80211_get_bss_channel(struct wiphy *wiphy, const u8 *ie, size_t ielen, | |
| struct ieee80211_channel *channel) | |
| { | |
| u32 freq; | |
| int channel_number; | |
| struct ieee80211_channel *alt_channel; | |
| channel_number = cfg80211_get_ies_channel_number(ie, ielen, | |
| channel->band); | |
| if (channel_number < 0) { | |
| /* No channel information in frame payload */ | |
| return channel; | |
| } | |
| freq = ieee80211_channel_to_freq_khz(channel_number, channel->band); | |
| /* | |
| * Frame info (beacon/prob res) is the same as received channel, | |
| * no need for further processing. | |
| */ | |
| if (freq == ieee80211_channel_to_khz(channel)) | |
| return channel; | |
| alt_channel = ieee80211_get_channel_khz(wiphy, freq); | |
| if (!alt_channel) { | |
| if (channel->band == NL80211_BAND_2GHZ || | |
| channel->band == NL80211_BAND_6GHZ) { | |
| /* | |
| * Better not allow unexpected channels when that could | |
| * be going beyond the 1-11 range (e.g., discovering | |
| * BSS on channel 12 when radio is configured for | |
| * channel 11) or beyond the 6 GHz channel range. | |
| */ | |
| return NULL; | |
| } | |
| /* No match for the payload channel number - ignore it */ | |
| return channel; | |
| } | |
| /* | |
| * Use the channel determined through the payload channel number | |
| * instead of the RX channel reported by the driver. | |
| */ | |
| if (alt_channel->flags & IEEE80211_CHAN_DISABLED) | |
| return NULL; | |
| return alt_channel; | |
| } | |
| struct cfg80211_inform_single_bss_data { | |
| struct cfg80211_inform_bss *drv_data; | |
| enum cfg80211_bss_frame_type ftype; | |
| struct ieee80211_channel *channel; | |
| u8 bssid[ETH_ALEN]; | |
| u64 tsf; | |
| u16 capability; | |
| u16 beacon_interval; | |
| const u8 *ie; | |
| size_t ielen; | |
| enum bss_source_type bss_source; | |
| /* Set if reporting bss_source != BSS_SOURCE_DIRECT */ | |
| struct cfg80211_bss *source_bss; | |
| u8 max_bssid_indicator; | |
| u8 bssid_index; | |
| u8 use_for; | |
| u64 cannot_use_reasons; | |
| }; | |
| enum ieee80211_ap_reg_power | |
| cfg80211_get_6ghz_power_type(const u8 *elems, size_t elems_len, | |
| u32 client_flags) | |
| { | |
| const struct ieee80211_he_6ghz_oper *he_6ghz_oper; | |
| struct ieee80211_he_operation *he_oper; | |
| const struct element *tmp; | |
| tmp = cfg80211_find_ext_elem(WLAN_EID_EXT_HE_OPERATION, | |
| elems, elems_len); | |
| if (!tmp || tmp->datalen < sizeof(*he_oper) + 1 || | |
| tmp->datalen < ieee80211_he_oper_size(tmp->data + 1)) | |
| return IEEE80211_REG_UNSET_AP; | |
| he_oper = (void *)&tmp->data[1]; | |
| he_6ghz_oper = ieee80211_he_6ghz_oper(he_oper); | |
| if (!he_6ghz_oper) | |
| return IEEE80211_REG_UNSET_AP; | |
| return cfg80211_6ghz_power_type(he_6ghz_oper->control, client_flags); | |
| } | |
| static bool cfg80211_6ghz_power_type_valid(const u8 *elems, size_t elems_len, | |
| const u32 flags) | |
| { | |
| switch (cfg80211_get_6ghz_power_type(elems, elems_len, flags)) { | |
| case IEEE80211_REG_LPI_AP: | |
| return true; | |
| case IEEE80211_REG_SP_AP: | |
| return !(flags & IEEE80211_CHAN_NO_6GHZ_AFC_CLIENT); | |
| case IEEE80211_REG_VLP_AP: | |
| return !(flags & IEEE80211_CHAN_NO_6GHZ_VLP_CLIENT); | |
| default: | |
| return false; | |
| } | |
| } | |
| /* Returned bss is reference counted and must be cleaned up appropriately. */ | |
| static struct cfg80211_bss * | |
| cfg80211_inform_single_bss_data(struct wiphy *wiphy, | |
| struct cfg80211_inform_single_bss_data *data, | |
| gfp_t gfp) | |
| { | |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | |
| struct cfg80211_inform_bss *drv_data = data->drv_data; | |
| struct cfg80211_bss_ies *ies; | |
| struct ieee80211_channel *channel; | |
| struct cfg80211_internal_bss tmp = {}, *res; | |
| int bss_type; | |
| bool signal_valid; | |
| unsigned long ts; | |
| if (WARN_ON(!wiphy)) | |
| return NULL; | |
| if (WARN_ON(wiphy->signal_type == CFG80211_SIGNAL_TYPE_UNSPEC && | |
| (drv_data->signal < 0 || drv_data->signal > 100))) | |
| return NULL; | |
| if (WARN_ON(data->bss_source != BSS_SOURCE_DIRECT && !data->source_bss)) | |
| return NULL; | |
| channel = data->channel; | |
| if (!channel) | |
| channel = cfg80211_get_bss_channel(wiphy, data->ie, data->ielen, | |
| drv_data->chan); | |
| if (!channel) | |
| return NULL; | |
| if (channel->band == NL80211_BAND_6GHZ && | |
| !cfg80211_6ghz_power_type_valid(data->ie, data->ielen, | |
| channel->flags)) { | |
| data->use_for = 0; | |
| data->cannot_use_reasons = | |
| NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH; | |
| } | |
| memcpy(tmp.pub.bssid, data->bssid, ETH_ALEN); | |
| tmp.pub.channel = channel; | |
| if (data->bss_source != BSS_SOURCE_STA_PROFILE) | |
| tmp.pub.signal = drv_data->signal; | |
| else | |
| tmp.pub.signal = 0; | |
| tmp.pub.beacon_interval = data->beacon_interval; | |
| tmp.pub.capability = data->capability; | |
| tmp.pub.ts_boottime = drv_data->boottime_ns; | |
| tmp.parent_tsf = drv_data->parent_tsf; | |
| ether_addr_copy(tmp.parent_bssid, drv_data->parent_bssid); | |
| tmp.pub.chains = drv_data->chains; | |
| memcpy(tmp.pub.chain_signal, drv_data->chain_signal, | |
| IEEE80211_MAX_CHAINS); | |
| tmp.pub.use_for = data->use_for; | |
| tmp.pub.cannot_use_reasons = data->cannot_use_reasons; | |
| tmp.bss_source = data->bss_source; | |
| switch (data->bss_source) { | |
| case BSS_SOURCE_MBSSID: | |
| tmp.pub.transmitted_bss = data->source_bss; | |
| fallthrough; | |
| case BSS_SOURCE_STA_PROFILE: | |
| ts = bss_from_pub(data->source_bss)->ts; | |
| tmp.pub.bssid_index = data->bssid_index; | |
| tmp.pub.max_bssid_indicator = data->max_bssid_indicator; | |
| break; | |
| case BSS_SOURCE_DIRECT: | |
| ts = jiffies; | |
| if (channel->band == NL80211_BAND_60GHZ) { | |
| bss_type = data->capability & | |
| WLAN_CAPABILITY_DMG_TYPE_MASK; | |
| if (bss_type == WLAN_CAPABILITY_DMG_TYPE_AP || | |
| bss_type == WLAN_CAPABILITY_DMG_TYPE_PBSS) | |
| regulatory_hint_found_beacon(wiphy, channel, | |
| gfp); | |
| } else { | |
| if (data->capability & WLAN_CAPABILITY_ESS) | |
| regulatory_hint_found_beacon(wiphy, channel, | |
| gfp); | |
| } | |
| break; | |
| } | |
| /* | |
| * If we do not know here whether the IEs are from a Beacon or Probe | |
| * Response frame, we need to pick one of the options and only use it | |
| * with the driver that does not provide the full Beacon/Probe Response | |
| * frame. Use Beacon frame pointer to avoid indicating that this should | |
| * override the IEs pointer should we have received an earlier | |
| * indication of Probe Response data. | |
| */ | |
| ies = kzalloc(sizeof(*ies) + data->ielen, gfp); | |
| if (!ies) | |
| return NULL; | |
| ies->len = data->ielen; | |
| ies->tsf = data->tsf; | |
| ies->from_beacon = false; | |
| memcpy(ies->data, data->ie, data->ielen); | |
| switch (data->ftype) { | |
| case CFG80211_BSS_FTYPE_BEACON: | |
| case CFG80211_BSS_FTYPE_S1G_BEACON: | |
| ies->from_beacon = true; | |
| fallthrough; | |
| case CFG80211_BSS_FTYPE_UNKNOWN: | |
| rcu_assign_pointer(tmp.pub.beacon_ies, ies); | |
| break; | |
| case CFG80211_BSS_FTYPE_PRESP: | |
| rcu_assign_pointer(tmp.pub.proberesp_ies, ies); | |
| break; | |
| } | |
| rcu_assign_pointer(tmp.pub.ies, ies); | |
| signal_valid = drv_data->chan == channel; | |
| spin_lock_bh(&rdev->bss_lock); | |
| res = __cfg80211_bss_update(rdev, &tmp, signal_valid, ts); | |
| if (!res) | |
| goto drop; | |
| rdev_inform_bss(rdev, &res->pub, ies, drv_data->drv_data); | |
| if (data->bss_source == BSS_SOURCE_MBSSID) { | |
| /* this is a nontransmitting bss, we need to add it to | |
| * transmitting bss' list if it is not there | |
| */ | |
| if (cfg80211_add_nontrans_list(data->source_bss, &res->pub)) { | |
| if (__cfg80211_unlink_bss(rdev, res)) { | |
| rdev->bss_generation++; | |
| res = NULL; | |
| } | |
| } | |
| if (!res) | |
| goto drop; | |
| } | |
| spin_unlock_bh(&rdev->bss_lock); | |
| trace_cfg80211_return_bss(&res->pub); | |
| /* __cfg80211_bss_update gives us a referenced result */ | |
| return &res->pub; | |
| drop: | |
| spin_unlock_bh(&rdev->bss_lock); | |
| return NULL; | |
| } | |
| static bool cfg80211_iter_profile_continuation(const u8 *ie, size_t ielen, | |
| const struct element **mbssid, | |
| const struct element **sub_elem) | |
| { | |
| const u8 *mbssid_end = (*mbssid)->data + (*mbssid)->datalen; | |
| const struct element *next_mbssid; | |
| const struct element *next_sub; | |
| next_mbssid = cfg80211_find_elem(WLAN_EID_MULTIPLE_BSSID, | |
| mbssid_end, | |
| ielen - (mbssid_end - ie)); | |
| /* | |
| * If it is not the last subelement in current MBSSID IE or there isn't | |
| * a next MBSSID IE - profile is complete. | |
| */ | |
| if (((*sub_elem)->data + (*sub_elem)->datalen < mbssid_end - 1) || | |
| !next_mbssid) | |
| return false; | |
| /* For any length error, just return false to stop iteration */ | |
| if (next_mbssid->datalen < 4) | |
| return false; | |
| next_sub = (void *)&next_mbssid->data[1]; | |
| if (next_mbssid->data + next_mbssid->datalen < | |
| next_sub->data + next_sub->datalen) | |
| return false; | |
| if (next_sub->id != 0 || next_sub->datalen < 2) | |
| return false; | |
| /* | |
| * Check if the first element in the next sub element is a start | |
| * of a new profile | |
| */ | |
| if (next_sub->data[0] == WLAN_EID_NON_TX_BSSID_CAP) | |
| return false; | |
| *mbssid = next_mbssid; | |
| *sub_elem = next_sub; | |
| return true; | |
| } | |
| size_t cfg80211_merge_profile(const u8 *ie, size_t ielen, | |
| const struct element *mbssid_elem, | |
| const struct element *sub_elem, | |
| u8 *merged_ie, size_t max_copy_len) | |
| { | |
| size_t copied_len = sub_elem->datalen; | |
| if (sub_elem->datalen > max_copy_len) | |
| return 0; | |
| memcpy(merged_ie, sub_elem->data, sub_elem->datalen); | |
| while (cfg80211_iter_profile_continuation(ie, ielen, | |
| &mbssid_elem, | |
| &sub_elem)) { | |
| if (copied_len + sub_elem->datalen > max_copy_len) | |
| break; | |
| memcpy(merged_ie + copied_len, sub_elem->data, | |
| sub_elem->datalen); | |
| copied_len += sub_elem->datalen; | |
| } | |
| return copied_len; | |
| } | |
| EXPORT_SYMBOL(cfg80211_merge_profile); | |
| static void | |
| cfg80211_parse_mbssid_data(struct wiphy *wiphy, | |
| struct cfg80211_inform_single_bss_data *tx_data, | |
| struct cfg80211_bss *source_bss, | |
| gfp_t gfp) | |
| { | |
| struct cfg80211_inform_single_bss_data data = { | |
| .drv_data = tx_data->drv_data, | |
| .ftype = tx_data->ftype, | |
| .tsf = tx_data->tsf, | |
| .beacon_interval = tx_data->beacon_interval, | |
| .source_bss = source_bss, | |
| .bss_source = BSS_SOURCE_MBSSID, | |
| .use_for = tx_data->use_for, | |
| .cannot_use_reasons = tx_data->cannot_use_reasons, | |
| }; | |
| const u8 *mbssid_index_ie; | |
| const struct element *elem, *sub; | |
| u8 *new_ie, *profile; | |
| u64 seen_indices = 0; | |
| struct cfg80211_bss *bss; | |
| if (!source_bss) | |
| return; | |
| if (!cfg80211_find_elem(WLAN_EID_MULTIPLE_BSSID, | |
| tx_data->ie, tx_data->ielen)) | |
| return; | |
| if (!wiphy->support_mbssid) | |
| return; | |
| if (wiphy->support_only_he_mbssid && | |
| !cfg80211_find_ext_elem(WLAN_EID_EXT_HE_CAPABILITY, | |
| tx_data->ie, tx_data->ielen)) | |
| return; | |
| new_ie = kmalloc(IEEE80211_MAX_DATA_LEN, gfp); | |
| if (!new_ie) | |
| return; | |
| profile = kmalloc(tx_data->ielen, gfp); | |
| if (!profile) | |
| goto out; | |
| for_each_element_id(elem, WLAN_EID_MULTIPLE_BSSID, | |
| tx_data->ie, tx_data->ielen) { | |
| if (elem->datalen < 4) | |
| continue; | |
| if (elem->data[0] < 1 || (int)elem->data[0] > 8) | |
| continue; | |
| for_each_element(sub, elem->data + 1, elem->datalen - 1) { | |
| u8 profile_len; | |
| if (sub->id != 0 || sub->datalen < 4) { | |
| /* not a valid BSS profile */ | |
| continue; | |
| } | |
| if (sub->data[0] != WLAN_EID_NON_TX_BSSID_CAP || | |
| sub->data[1] != 2) { | |
| /* The first element within the Nontransmitted | |
| * BSSID Profile is not the Nontransmitted | |
| * BSSID Capability element. | |
| */ | |
| continue; | |
| } | |
| memset(profile, 0, tx_data->ielen); | |
| profile_len = cfg80211_merge_profile(tx_data->ie, | |
| tx_data->ielen, | |
| elem, | |
| sub, | |
| profile, | |
| tx_data->ielen); | |
| /* found a Nontransmitted BSSID Profile */ | |
| mbssid_index_ie = cfg80211_find_ie | |
| (WLAN_EID_MULTI_BSSID_IDX, | |
| profile, profile_len); | |
| if (!mbssid_index_ie || mbssid_index_ie[1] < 1 || | |
| mbssid_index_ie[2] == 0 || | |
| mbssid_index_ie[2] > 46 || | |
| mbssid_index_ie[2] >= (1 << elem->data[0])) { | |
| /* No valid Multiple BSSID-Index element */ | |
| continue; | |
| } | |
| if (seen_indices & BIT_ULL(mbssid_index_ie[2])) | |
| /* We don't support legacy split of a profile */ | |
| net_dbg_ratelimited("Partial info for BSSID index %d\n", | |
| mbssid_index_ie[2]); | |
| seen_indices |= BIT_ULL(mbssid_index_ie[2]); | |
| data.bssid_index = mbssid_index_ie[2]; | |
| data.max_bssid_indicator = elem->data[0]; | |
| cfg80211_gen_new_bssid(tx_data->bssid, | |
| data.max_bssid_indicator, | |
| data.bssid_index, | |
| data.bssid); | |
| memset(new_ie, 0, IEEE80211_MAX_DATA_LEN); | |
| data.ie = new_ie; | |
| data.ielen = cfg80211_gen_new_ie(tx_data->ie, | |
| tx_data->ielen, | |
| profile, | |
| profile_len, | |
| new_ie, | |
| IEEE80211_MAX_DATA_LEN); | |
| if (!data.ielen) | |
| continue; | |
| data.capability = get_unaligned_le16(profile + 2); | |
| bss = cfg80211_inform_single_bss_data(wiphy, &data, gfp); | |
| if (!bss) | |
| break; | |
| cfg80211_put_bss(wiphy, bss); | |
| } | |
| } | |
| out: | |
| kfree(new_ie); | |
| kfree(profile); | |
| } | |
| ssize_t cfg80211_defragment_element(const struct element *elem, const u8 *ies, | |
| size_t ieslen, u8 *data, size_t data_len, | |
| u8 frag_id) | |
| { | |
| const struct element *next; | |
| ssize_t copied; | |
| u8 elem_datalen; | |
| if (!elem || (const u8 *)elem < ies || | |
| (const u8 *)elem + sizeof(*elem) > ies + ieslen || | |
| (const u8 *)elem + sizeof(*elem) + elem->datalen > ies + ieslen) | |
| return -EINVAL; | |
| /* elem might be invalid after the memmove */ | |
| next = (void *)(elem->data + elem->datalen); | |
| elem_datalen = elem->datalen; | |
| if (elem->id == WLAN_EID_EXTENSION) { | |
| copied = elem->datalen - 1; | |
| if (data) { | |
| if (copied > data_len) | |
| return -ENOSPC; | |
| memmove(data, elem->data + 1, copied); | |
| } | |
| } else { | |
| copied = elem->datalen; | |
| if (data) { | |
| if (copied > data_len) | |
| return -ENOSPC; | |
| memmove(data, elem->data, copied); | |
| } | |
| } | |
| /* Fragmented elements must have 255 bytes */ | |
| if (elem_datalen < 255) | |
| return copied; | |
| for (elem = next; | |
| elem->data < ies + ieslen && | |
| elem->data + elem->datalen <= ies + ieslen; | |
| elem = next) { | |
| /* elem might be invalid after the memmove */ | |
| next = (void *)(elem->data + elem->datalen); | |
| if (elem->id != frag_id) | |
| break; | |
| elem_datalen = elem->datalen; | |
| if (data) { | |
| if (copied + elem_datalen > data_len) | |
| return -ENOSPC; | |
| memmove(data + copied, elem->data, elem_datalen); | |
| } | |
| copied += elem_datalen; | |
| /* Only the last fragment may be short */ | |
| if (elem_datalen != 255) | |
| break; | |
| } | |
| return copied; | |
| } | |
| EXPORT_SYMBOL(cfg80211_defragment_element); | |
| struct cfg80211_mle { | |
| struct ieee80211_multi_link_elem *mle; | |
| struct ieee80211_mle_per_sta_profile | |
| *sta_prof[IEEE80211_MLD_MAX_NUM_LINKS]; | |
| ssize_t sta_prof_len[IEEE80211_MLD_MAX_NUM_LINKS]; | |
| u8 data[]; | |
| }; | |
| static struct cfg80211_mle * | |
| cfg80211_defrag_mle(const struct element *mle, const u8 *ie, size_t ielen, | |
| gfp_t gfp) | |
| { | |
| const struct element *elem; | |
| struct cfg80211_mle *res; | |
| size_t buf_len; | |
| ssize_t mle_len; | |
| u8 common_size, idx; | |
| if (!mle || !ieee80211_mle_size_ok(mle->data + 1, mle->datalen - 1)) | |
| return NULL; | |
| /* Required length for first defragmentation */ | |
| buf_len = mle->datalen - 1; | |
| for_each_element(elem, mle->data + mle->datalen, | |
| ie + ielen - mle->data - mle->datalen) { | |
| if (elem->id != WLAN_EID_FRAGMENT) | |
| break; | |
| buf_len += elem->datalen; | |
| } | |
| res = kzalloc_flex(*res, data, buf_len, gfp); | |
| if (!res) | |
| return NULL; | |
| mle_len = cfg80211_defragment_element(mle, ie, ielen, | |
| res->data, buf_len, | |
| WLAN_EID_FRAGMENT); | |
| if (mle_len < 0) | |
| goto error; | |
| res->mle = (void *)res->data; | |
| /* Find the sub-element area in the buffer */ | |
| common_size = ieee80211_mle_common_size((u8 *)res->mle); | |
| ie = res->data + common_size; | |
| ielen = mle_len - common_size; | |
| idx = 0; | |
| for_each_element_id(elem, IEEE80211_MLE_SUBELEM_PER_STA_PROFILE, | |
| ie, ielen) { | |
| res->sta_prof[idx] = (void *)elem->data; | |
| res->sta_prof_len[idx] = elem->datalen; | |
| idx++; | |
| if (idx >= IEEE80211_MLD_MAX_NUM_LINKS) | |
| break; | |
| } | |
| if (!for_each_element_completed(elem, ie, ielen)) | |
| goto error; | |
| /* Defragment sta_info in-place */ | |
| for (idx = 0; idx < IEEE80211_MLD_MAX_NUM_LINKS && res->sta_prof[idx]; | |
| idx++) { | |
| if (res->sta_prof_len[idx] < 255) | |
| continue; | |
| elem = (void *)res->sta_prof[idx] - 2; | |
| if (idx + 1 < ARRAY_SIZE(res->sta_prof) && | |
| res->sta_prof[idx + 1]) | |
| buf_len = (u8 *)res->sta_prof[idx + 1] - | |
| (u8 *)res->sta_prof[idx]; | |
| else | |
| buf_len = ielen + ie - (u8 *)elem; | |
| res->sta_prof_len[idx] = | |
| cfg80211_defragment_element(elem, | |
| (u8 *)elem, buf_len, | |
| (u8 *)res->sta_prof[idx], | |
| buf_len, | |
| IEEE80211_MLE_SUBELEM_FRAGMENT); | |
| if (res->sta_prof_len[idx] < 0) | |
| goto error; | |
| } | |
| return res; | |
| error: | |
| kfree(res); | |
| return NULL; | |
| } | |
| struct tbtt_info_iter_data { | |
| const struct ieee80211_neighbor_ap_info *ap_info; | |
| u8 param_ch_count; | |
| u32 use_for; | |
| u8 mld_id, link_id; | |
| bool non_tx; | |
| }; | |
| static enum cfg80211_rnr_iter_ret | |
| cfg802121_mld_ap_rnr_iter(void *_data, u8 type, | |
| const struct ieee80211_neighbor_ap_info *info, | |
| const u8 *tbtt_info, u8 tbtt_info_len) | |
| { | |
| const struct ieee80211_rnr_mld_params *mld_params; | |
| struct tbtt_info_iter_data *data = _data; | |
| u8 link_id; | |
| bool non_tx = false; | |
| if (type == IEEE80211_TBTT_INFO_TYPE_TBTT && | |
| tbtt_info_len >= offsetofend(struct ieee80211_tbtt_info_ge_11, | |
| mld_params)) { | |
| const struct ieee80211_tbtt_info_ge_11 *tbtt_info_ge_11 = | |
| (void *)tbtt_info; | |
| non_tx = (tbtt_info_ge_11->bss_params & | |
| (IEEE80211_RNR_TBTT_PARAMS_MULTI_BSSID | | |
| IEEE80211_RNR_TBTT_PARAMS_TRANSMITTED_BSSID)) == | |
| IEEE80211_RNR_TBTT_PARAMS_MULTI_BSSID; | |
| mld_params = &tbtt_info_ge_11->mld_params; | |
| } else if (type == IEEE80211_TBTT_INFO_TYPE_MLD && | |
| tbtt_info_len >= sizeof(struct ieee80211_rnr_mld_params)) | |
| mld_params = (void *)tbtt_info; | |
| else | |
| return RNR_ITER_CONTINUE; | |
| link_id = le16_get_bits(mld_params->params, | |
| IEEE80211_RNR_MLD_PARAMS_LINK_ID); | |
| if (data->mld_id != mld_params->mld_id) | |
| return RNR_ITER_CONTINUE; | |
| if (data->link_id != link_id) | |
| return RNR_ITER_CONTINUE; | |
| data->ap_info = info; | |
| data->param_ch_count = | |
| le16_get_bits(mld_params->params, | |
| IEEE80211_RNR_MLD_PARAMS_BSS_CHANGE_COUNT); | |
| data->non_tx = non_tx; | |
| if (type == IEEE80211_TBTT_INFO_TYPE_TBTT) | |
| data->use_for = NL80211_BSS_USE_FOR_ALL; | |
| else | |
| data->use_for = NL80211_BSS_USE_FOR_MLD_LINK; | |
| return RNR_ITER_BREAK; | |
| } | |
| static u8 | |
| cfg80211_rnr_info_for_mld_ap(const u8 *ie, size_t ielen, u8 mld_id, u8 link_id, | |
| const struct ieee80211_neighbor_ap_info **ap_info, | |
| u8 *param_ch_count, bool *non_tx) | |
| { | |
| struct tbtt_info_iter_data data = { | |
| .mld_id = mld_id, | |
| .link_id = link_id, | |
| }; | |
| cfg80211_iter_rnr(ie, ielen, cfg802121_mld_ap_rnr_iter, &data); | |
| *ap_info = data.ap_info; | |
| *param_ch_count = data.param_ch_count; | |
| *non_tx = data.non_tx; | |
| return data.use_for; | |
| } | |
| static struct element * | |
| cfg80211_gen_reporter_rnr(struct cfg80211_bss *source_bss, bool is_mbssid, | |
| bool same_mld, u8 link_id, u8 bss_change_count, | |
| gfp_t gfp) | |
| { | |
| const struct cfg80211_bss_ies *ies; | |
| struct ieee80211_neighbor_ap_info ap_info; | |
| struct ieee80211_tbtt_info_ge_11 tbtt_info; | |
| u32 short_ssid; | |
| const struct element *elem; | |
| struct element *res; | |
| /* | |
| * We only generate the RNR to permit ML lookups. For that we do not | |
| * need an entry for the corresponding transmitting BSS, lets just skip | |
| * it even though it would be easy to add. | |
| */ | |
| if (!same_mld) | |
| return NULL; | |
| /* We could use tx_data->ies if we change cfg80211_calc_short_ssid */ | |
| rcu_read_lock(); | |
| ies = rcu_dereference(source_bss->ies); | |
| ap_info.tbtt_info_len = offsetofend(typeof(tbtt_info), mld_params); | |
| ap_info.tbtt_info_hdr = | |
| u8_encode_bits(IEEE80211_TBTT_INFO_TYPE_TBTT, | |
| IEEE80211_AP_INFO_TBTT_HDR_TYPE) | | |
| u8_encode_bits(0, IEEE80211_AP_INFO_TBTT_HDR_COUNT); | |
| ap_info.channel = ieee80211_frequency_to_channel(source_bss->channel->center_freq); | |
| /* operating class */ | |
| elem = cfg80211_find_elem(WLAN_EID_SUPPORTED_REGULATORY_CLASSES, | |
| ies->data, ies->len); | |
| if (elem && elem->datalen >= 1) { | |
| ap_info.op_class = elem->data[0]; | |
| } else { | |
| struct cfg80211_chan_def chandef; | |
| /* The AP is not providing us with anything to work with. So | |
| * make up a somewhat reasonable operating class, but don't | |
| * bother with it too much as no one will ever use the | |
| * information. | |
| */ | |
| cfg80211_chandef_create(&chandef, source_bss->channel, | |
| NL80211_CHAN_NO_HT); | |
| if (!ieee80211_chandef_to_operating_class(&chandef, | |
| &ap_info.op_class)) | |
| goto out_unlock; | |
| } | |
| /* Just set TBTT offset and PSD 20 to invalid/unknown */ | |
| tbtt_info.tbtt_offset = 255; | |
| tbtt_info.psd_20 = IEEE80211_RNR_TBTT_PARAMS_PSD_RESERVED; | |
| memcpy(tbtt_info.bssid, source_bss->bssid, ETH_ALEN); | |
| if (cfg80211_calc_short_ssid(ies, &elem, &short_ssid)) | |
| goto out_unlock; | |
| rcu_read_unlock(); | |
| tbtt_info.short_ssid = cpu_to_le32(short_ssid); | |
| tbtt_info.bss_params = IEEE80211_RNR_TBTT_PARAMS_SAME_SSID; | |
| if (is_mbssid) { | |
| tbtt_info.bss_params |= IEEE80211_RNR_TBTT_PARAMS_MULTI_BSSID; | |
| tbtt_info.bss_params |= IEEE80211_RNR_TBTT_PARAMS_TRANSMITTED_BSSID; | |
| } | |
| tbtt_info.mld_params.mld_id = 0; | |
| tbtt_info.mld_params.params = | |
| le16_encode_bits(link_id, IEEE80211_RNR_MLD_PARAMS_LINK_ID) | | |
| le16_encode_bits(bss_change_count, | |
| IEEE80211_RNR_MLD_PARAMS_BSS_CHANGE_COUNT); | |
| res = kzalloc_flex(*res, data, sizeof(ap_info) + ap_info.tbtt_info_len, | |
| gfp); | |
| if (!res) | |
| return NULL; | |
| /* Copy the data */ | |
| res->id = WLAN_EID_REDUCED_NEIGHBOR_REPORT; | |
| res->datalen = sizeof(ap_info) + ap_info.tbtt_info_len; | |
| memcpy(res->data, &ap_info, sizeof(ap_info)); | |
| memcpy(res->data + sizeof(ap_info), &tbtt_info, ap_info.tbtt_info_len); | |
| return res; | |
| out_unlock: | |
| rcu_read_unlock(); | |
| return NULL; | |
| } | |
| static void | |
| cfg80211_parse_ml_elem_sta_data(struct wiphy *wiphy, | |
| struct cfg80211_inform_single_bss_data *tx_data, | |
| struct cfg80211_bss *source_bss, | |
| const struct element *elem, | |
| gfp_t gfp) | |
| { | |
| struct cfg80211_inform_single_bss_data data = { | |
| .drv_data = tx_data->drv_data, | |
| .ftype = tx_data->ftype, | |
| .source_bss = source_bss, | |
| .bss_source = BSS_SOURCE_STA_PROFILE, | |
| }; | |
| struct element *reporter_rnr = NULL; | |
| struct ieee80211_multi_link_elem *ml_elem; | |
| struct cfg80211_mle *mle; | |
| const struct element *ssid_elem; | |
| const u8 *ssid = NULL; | |
| size_t ssid_len = 0; | |
| u16 control; | |
| u8 ml_common_len; | |
| u8 *new_ie = NULL; | |
| struct cfg80211_bss *bss; | |
| u8 mld_id, reporter_link_id, bss_change_count; | |
| u16 seen_links = 0; | |
| u8 i; | |
| if (!ieee80211_mle_type_ok(elem->data + 1, | |
| IEEE80211_ML_CONTROL_TYPE_BASIC, | |
| elem->datalen - 1)) | |
| return; | |
| ml_elem = (void *)(elem->data + 1); | |
| control = le16_to_cpu(ml_elem->control); | |
| ml_common_len = ml_elem->variable[0]; | |
| /* Must be present when transmitted by an AP (in a probe response) */ | |
| if (!(control & IEEE80211_MLC_BASIC_PRES_BSS_PARAM_CH_CNT) || | |
| !(control & IEEE80211_MLC_BASIC_PRES_LINK_ID) || | |
| !(control & IEEE80211_MLC_BASIC_PRES_MLD_CAPA_OP)) | |
| return; | |
| reporter_link_id = ieee80211_mle_get_link_id(elem->data + 1); | |
| bss_change_count = ieee80211_mle_get_bss_param_ch_cnt(elem->data + 1); | |
| /* | |
| * The MLD ID of the reporting AP is always zero. It is set if the AP | |
| * is part of an MBSSID set and will be non-zero for ML Elements | |
| * relating to a nontransmitted BSS (matching the Multi-BSSID Index, | |
| * Draft P802.11be_D3.2, 35.3.4.2) | |
| */ | |
| mld_id = ieee80211_mle_get_mld_id(elem->data + 1); | |
| /* Fully defrag the ML element for sta information/profile iteration */ | |
| mle = cfg80211_defrag_mle(elem, tx_data->ie, tx_data->ielen, gfp); | |
| if (!mle) | |
| return; | |
| /* No point in doing anything if there is no per-STA profile */ | |
| if (!mle->sta_prof[0]) | |
| goto out; | |
| new_ie = kmalloc(IEEE80211_MAX_DATA_LEN, gfp); | |
| if (!new_ie) | |
| goto out; | |
| reporter_rnr = cfg80211_gen_reporter_rnr(source_bss, | |
| u16_get_bits(control, | |
| IEEE80211_MLC_BASIC_PRES_MLD_ID), | |
| mld_id == 0, reporter_link_id, | |
| bss_change_count, | |
| gfp); | |
| ssid_elem = cfg80211_find_elem(WLAN_EID_SSID, tx_data->ie, | |
| tx_data->ielen); | |
| if (ssid_elem) { | |
| ssid = ssid_elem->data; | |
| ssid_len = ssid_elem->datalen; | |
| } | |
| for (i = 0; i < ARRAY_SIZE(mle->sta_prof) && mle->sta_prof[i]; i++) { | |
| const struct ieee80211_neighbor_ap_info *ap_info; | |
| enum nl80211_band band; | |
| u32 freq; | |
| const u8 *profile; | |
| ssize_t profile_len; | |
| u8 param_ch_count; | |
| u8 link_id, use_for; | |
| bool non_tx; | |
| if (!ieee80211_mle_basic_sta_prof_size_ok((u8 *)mle->sta_prof[i], | |
| mle->sta_prof_len[i])) | |
| continue; | |
| control = le16_to_cpu(mle->sta_prof[i]->control); | |
| if (!(control & IEEE80211_MLE_STA_CONTROL_COMPLETE_PROFILE)) | |
| continue; | |
| link_id = u16_get_bits(control, | |
| IEEE80211_MLE_STA_CONTROL_LINK_ID); | |
| if (seen_links & BIT(link_id)) | |
| break; | |
| seen_links |= BIT(link_id); | |
| if (!(control & IEEE80211_MLE_STA_CONTROL_BEACON_INT_PRESENT) || | |
| !(control & IEEE80211_MLE_STA_CONTROL_TSF_OFFS_PRESENT) || | |
| !(control & IEEE80211_MLE_STA_CONTROL_STA_MAC_ADDR_PRESENT)) | |
| continue; | |
| memcpy(data.bssid, mle->sta_prof[i]->variable, ETH_ALEN); | |
| data.beacon_interval = | |
| get_unaligned_le16(mle->sta_prof[i]->variable + 6); | |
| data.tsf = tx_data->tsf + | |
| get_unaligned_le64(mle->sta_prof[i]->variable + 8); | |
| /* sta_info_len counts itself */ | |
| profile = mle->sta_prof[i]->variable + | |
| mle->sta_prof[i]->sta_info_len - 1; | |
| profile_len = (u8 *)mle->sta_prof[i] + mle->sta_prof_len[i] - | |
| profile; | |
| if (profile_len < 2) | |
| continue; | |
| data.capability = get_unaligned_le16(profile); | |
| profile += 2; | |
| profile_len -= 2; | |
| /* Find in RNR to look up channel information */ | |
| use_for = cfg80211_rnr_info_for_mld_ap(tx_data->ie, | |
| tx_data->ielen, | |
| mld_id, link_id, | |
| &ap_info, | |
| ¶m_ch_count, | |
| &non_tx); | |
| if (!use_for) | |
| continue; | |
| /* | |
| * As of 802.11be_D5.0, the specification does not give us any | |
| * way of discovering both the MaxBSSID and the Multiple-BSSID | |
| * Index. It does seem like the Multiple-BSSID Index element | |
| * may be provided, but section 9.4.2.45 explicitly forbids | |
| * including a Multiple-BSSID Element (in this case without any | |
| * subelements). | |
| * Without both pieces of information we cannot calculate the | |
| * reference BSSID, so simply ignore the BSS. | |
| */ | |
| if (non_tx) | |
| continue; | |
| /* We could sanity check the BSSID is included */ | |
| if (!ieee80211_operating_class_to_band(ap_info->op_class, | |
| &band)) | |
| continue; | |
| freq = ieee80211_channel_to_freq_khz(ap_info->channel, band); | |
| data.channel = ieee80211_get_channel_khz(wiphy, freq); | |
| /* Skip if RNR element specifies an unsupported channel */ | |
| if (!data.channel) | |
| continue; | |
| /* Skip if BSS entry generated from MBSSID or DIRECT source | |
| * frame data available already. | |
| */ | |
| bss = cfg80211_get_bss(wiphy, data.channel, data.bssid, ssid, | |
| ssid_len, IEEE80211_BSS_TYPE_ANY, | |
| IEEE80211_PRIVACY_ANY); | |
| if (bss) { | |
| struct cfg80211_internal_bss *ibss = bss_from_pub(bss); | |
| if (data.capability == bss->capability && | |
| ibss->bss_source != BSS_SOURCE_STA_PROFILE) { | |
| cfg80211_put_bss(wiphy, bss); | |
| continue; | |
| } | |
| cfg80211_put_bss(wiphy, bss); | |
| } | |
| if (use_for == NL80211_BSS_USE_FOR_MLD_LINK && | |
| !(wiphy->flags & WIPHY_FLAG_SUPPORTS_NSTR_NONPRIMARY)) { | |
| use_for = 0; | |
| data.cannot_use_reasons = | |
| NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY; | |
| } | |
| data.use_for = use_for; | |
| /* Generate new elements */ | |
| memset(new_ie, 0, IEEE80211_MAX_DATA_LEN); | |
| data.ie = new_ie; | |
| data.ielen = cfg80211_gen_new_ie(tx_data->ie, tx_data->ielen, | |
| profile, profile_len, | |
| new_ie, | |
| IEEE80211_MAX_DATA_LEN); | |
| if (!data.ielen) | |
| continue; | |
| /* The generated elements do not contain: | |
| * - Basic ML element | |
| * - A TBTT entry in the RNR for the transmitting AP | |
| * | |
| * This information is needed both internally and in userspace | |
| * as such, we should append it here. | |
| */ | |
| if (data.ielen + 3 + sizeof(*ml_elem) + ml_common_len > | |
| IEEE80211_MAX_DATA_LEN) | |
| continue; | |
| /* Copy the Basic Multi-Link element including the common | |
| * information, and then fix up the link ID and BSS param | |
| * change count. | |
| * Note that the ML element length has been verified and we | |
| * also checked that it contains the link ID. | |
| */ | |
| new_ie[data.ielen++] = WLAN_EID_EXTENSION; | |
| new_ie[data.ielen++] = 1 + sizeof(*ml_elem) + ml_common_len; | |
| new_ie[data.ielen++] = WLAN_EID_EXT_EHT_MULTI_LINK; | |
| memcpy(new_ie + data.ielen, ml_elem, | |
| sizeof(*ml_elem) + ml_common_len); | |
| new_ie[data.ielen + sizeof(*ml_elem) + 1 + ETH_ALEN] = link_id; | |
| new_ie[data.ielen + sizeof(*ml_elem) + 1 + ETH_ALEN + 1] = | |
| param_ch_count; | |
| data.ielen += sizeof(*ml_elem) + ml_common_len; | |
| if (reporter_rnr && (use_for & NL80211_BSS_USE_FOR_NORMAL)) { | |
| if (data.ielen + sizeof(struct element) + | |
| reporter_rnr->datalen > IEEE80211_MAX_DATA_LEN) | |
| continue; | |
| memcpy(new_ie + data.ielen, reporter_rnr, | |
| sizeof(struct element) + reporter_rnr->datalen); | |
| data.ielen += sizeof(struct element) + | |
| reporter_rnr->datalen; | |
| } | |
| bss = cfg80211_inform_single_bss_data(wiphy, &data, gfp); | |
| if (!bss) | |
| break; | |
| cfg80211_put_bss(wiphy, bss); | |
| } | |
| out: | |
| kfree(reporter_rnr); | |
| kfree(new_ie); | |
| kfree(mle); | |
| } | |
| static void cfg80211_parse_ml_sta_data(struct wiphy *wiphy, | |
| struct cfg80211_inform_single_bss_data *tx_data, | |
| struct cfg80211_bss *source_bss, | |
| gfp_t gfp) | |
| { | |
| const struct element *elem; | |
| if (!source_bss) | |
| return; | |
| if (tx_data->ftype != CFG80211_BSS_FTYPE_PRESP) | |
| return; | |
| for_each_element_extid(elem, WLAN_EID_EXT_EHT_MULTI_LINK, | |
| tx_data->ie, tx_data->ielen) | |
| cfg80211_parse_ml_elem_sta_data(wiphy, tx_data, source_bss, | |
| elem, gfp); | |
| } | |
| struct cfg80211_bss * | |
| cfg80211_inform_bss_data(struct wiphy *wiphy, | |
| struct cfg80211_inform_bss *data, | |
| enum cfg80211_bss_frame_type ftype, | |
| const u8 *bssid, u64 tsf, u16 capability, | |
| u16 beacon_interval, const u8 *ie, size_t ielen, | |
| gfp_t gfp) | |
| { | |
| struct cfg80211_inform_single_bss_data inform_data = { | |
| .drv_data = data, | |
| .ftype = ftype, | |
| .tsf = tsf, | |
| .capability = capability, | |
| .beacon_interval = beacon_interval, | |
| .ie = ie, | |
| .ielen = ielen, | |
| .use_for = data->restrict_use ? | |
| data->use_for : | |
| NL80211_BSS_USE_FOR_ALL, | |
| .cannot_use_reasons = data->cannot_use_reasons, | |
| }; | |
| struct cfg80211_bss *res; | |
| memcpy(inform_data.bssid, bssid, ETH_ALEN); | |
| res = cfg80211_inform_single_bss_data(wiphy, &inform_data, gfp); | |
| if (!res) | |
| return NULL; | |
| /* don't do any further MBSSID/ML handling for S1G */ | |
| if (ftype == CFG80211_BSS_FTYPE_S1G_BEACON) | |
| return res; | |
| cfg80211_parse_mbssid_data(wiphy, &inform_data, res, gfp); | |
| cfg80211_parse_ml_sta_data(wiphy, &inform_data, res, gfp); | |
| return res; | |
| } | |
| EXPORT_SYMBOL(cfg80211_inform_bss_data); | |
| struct cfg80211_bss * | |
| cfg80211_inform_bss_frame_data(struct wiphy *wiphy, | |
| struct cfg80211_inform_bss *data, | |
| struct ieee80211_mgmt *mgmt, size_t len, | |
| gfp_t gfp) | |
| { | |
| size_t min_hdr_len; | |
| struct ieee80211_ext *ext = NULL; | |
| enum cfg80211_bss_frame_type ftype; | |
| u16 beacon_interval; | |
| const u8 *bssid; | |
| u16 capability; | |
| const u8 *ie; | |
| size_t ielen; | |
| u64 tsf; | |
| size_t s1g_optional_len; | |
| if (WARN_ON(!mgmt)) | |
| return NULL; | |
| if (WARN_ON(!wiphy)) | |
| return NULL; | |
| BUILD_BUG_ON(offsetof(struct ieee80211_mgmt, u.probe_resp.variable) != | |
| offsetof(struct ieee80211_mgmt, u.beacon.variable)); | |
| trace_cfg80211_inform_bss_frame(wiphy, data, mgmt, len); | |
| if (ieee80211_is_s1g_beacon(mgmt->frame_control)) { | |
| ext = (void *) mgmt; | |
| s1g_optional_len = | |
| ieee80211_s1g_optional_len(ext->frame_control); | |
| min_hdr_len = | |
| offsetof(struct ieee80211_ext, u.s1g_beacon.variable) + | |
| s1g_optional_len; | |
| } else { | |
| /* same for beacons */ | |
| min_hdr_len = offsetof(struct ieee80211_mgmt, | |
| u.probe_resp.variable); | |
| } | |
| if (WARN_ON(len < min_hdr_len)) | |
| return NULL; | |
| ielen = len - min_hdr_len; | |
| ie = mgmt->u.probe_resp.variable; | |
| if (ext) { | |
| const struct ieee80211_s1g_bcn_compat_ie *compat; | |
| const struct element *elem; | |
| ie = ext->u.s1g_beacon.variable + s1g_optional_len; | |
| elem = cfg80211_find_elem(WLAN_EID_S1G_BCN_COMPAT, ie, ielen); | |
| if (!elem) | |
| return NULL; | |
| if (elem->datalen < sizeof(*compat)) | |
| return NULL; | |
| compat = (void *)elem->data; | |
| bssid = ext->u.s1g_beacon.sa; | |
| capability = le16_to_cpu(compat->compat_info); | |
| beacon_interval = le16_to_cpu(compat->beacon_int); | |
| tsf = le32_to_cpu(ext->u.s1g_beacon.timestamp); | |
| tsf |= (u64)le32_to_cpu(compat->tsf_completion) << 32; | |
| } else { | |
| bssid = mgmt->bssid; | |
| beacon_interval = le16_to_cpu(mgmt->u.probe_resp.beacon_int); | |
| capability = le16_to_cpu(mgmt->u.probe_resp.capab_info); | |
| tsf = le64_to_cpu(mgmt->u.probe_resp.timestamp); | |
| } | |
| if (ieee80211_is_probe_resp(mgmt->frame_control)) | |
| ftype = CFG80211_BSS_FTYPE_PRESP; | |
| else if (ext) | |
| ftype = CFG80211_BSS_FTYPE_S1G_BEACON; | |
| else | |
| ftype = CFG80211_BSS_FTYPE_BEACON; | |
| return cfg80211_inform_bss_data(wiphy, data, ftype, | |
| bssid, tsf, capability, | |
| beacon_interval, ie, ielen, | |
| gfp); | |
| } | |
| EXPORT_SYMBOL(cfg80211_inform_bss_frame_data); | |
| void cfg80211_ref_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) | |
| { | |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | |
| if (!pub) | |
| return; | |
| spin_lock_bh(&rdev->bss_lock); | |
| bss_ref_get(rdev, bss_from_pub(pub)); | |
| spin_unlock_bh(&rdev->bss_lock); | |
| } | |
| EXPORT_SYMBOL(cfg80211_ref_bss); | |
| void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) | |
| { | |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | |
| if (!pub) | |
| return; | |
| spin_lock_bh(&rdev->bss_lock); | |
| bss_ref_put(rdev, bss_from_pub(pub)); | |
| spin_unlock_bh(&rdev->bss_lock); | |
| } | |
| EXPORT_SYMBOL(cfg80211_put_bss); | |
| void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) | |
| { | |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | |
| struct cfg80211_internal_bss *bss, *tmp1; | |
| struct cfg80211_bss *nontrans_bss, *tmp; | |
| if (WARN_ON(!pub)) | |
| return; | |
| bss = bss_from_pub(pub); | |
| spin_lock_bh(&rdev->bss_lock); | |
| if (list_empty(&bss->list)) | |
| goto out; | |
| list_for_each_entry_safe(nontrans_bss, tmp, | |
| &pub->nontrans_list, | |
| nontrans_list) { | |
| tmp1 = bss_from_pub(nontrans_bss); | |
| if (__cfg80211_unlink_bss(rdev, tmp1)) | |
| rdev->bss_generation++; | |
| } | |
| if (__cfg80211_unlink_bss(rdev, bss)) | |
| rdev->bss_generation++; | |
| out: | |
| spin_unlock_bh(&rdev->bss_lock); | |
| } | |
| EXPORT_SYMBOL(cfg80211_unlink_bss); | |
| void cfg80211_bss_iter(struct wiphy *wiphy, | |
| struct cfg80211_chan_def *chandef, | |
| void (*iter)(struct wiphy *wiphy, | |
| struct cfg80211_bss *bss, | |
| void *data), | |
| void *iter_data) | |
| { | |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | |
| struct cfg80211_internal_bss *bss; | |
| spin_lock_bh(&rdev->bss_lock); | |
| list_for_each_entry(bss, &rdev->bss_list, list) { | |
| if (!chandef || cfg80211_is_sub_chan(chandef, bss->pub.channel, | |
| false)) | |
| iter(wiphy, &bss->pub, iter_data); | |
| } | |
| spin_unlock_bh(&rdev->bss_lock); | |
| } | |
| EXPORT_SYMBOL(cfg80211_bss_iter); | |
| void cfg80211_update_assoc_bss_entry(struct wireless_dev *wdev, | |
| unsigned int link_id, | |
| struct ieee80211_channel *chan) | |
| { | |
| struct wiphy *wiphy = wdev->wiphy; | |
| struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy); | |
| struct cfg80211_internal_bss *cbss = wdev->links[link_id].client.current_bss; | |
| struct cfg80211_internal_bss *new = NULL; | |
| struct cfg80211_internal_bss *bss; | |
| struct cfg80211_bss *nontrans_bss; | |
| struct cfg80211_bss *tmp; | |
| spin_lock_bh(&rdev->bss_lock); | |
| /* | |
| * Some APs use CSA also for bandwidth changes, i.e., without actually | |
| * changing the control channel, so no need to update in such a case. | |
| */ | |
| if (cbss->pub.channel == chan) | |
| goto done; | |
| /* use transmitting bss */ | |
| if (cbss->pub.transmitted_bss) | |
| cbss = bss_from_pub(cbss->pub.transmitted_bss); | |
| cbss->pub.channel = chan; | |
| list_for_each_entry(bss, &rdev->bss_list, list) { | |
| if (!cfg80211_bss_type_match(bss->pub.capability, | |
| bss->pub.channel->band, | |
| wdev->conn_bss_type)) | |
| continue; | |
| if (bss == cbss) | |
| continue; | |
| if (!cmp_bss(&bss->pub, &cbss->pub, BSS_CMP_REGULAR)) { | |
| new = bss; | |
| break; | |
| } | |
| } | |
| if (new) { | |
| /* to save time, update IEs for transmitting bss only */ | |
| cfg80211_update_known_bss(rdev, cbss, new, false); | |
| new->pub.proberesp_ies = NULL; | |
| new->pub.beacon_ies = NULL; | |
| list_for_each_entry_safe(nontrans_bss, tmp, | |
| &new->pub.nontrans_list, | |
| nontrans_list) { | |
| bss = bss_from_pub(nontrans_bss); | |
| if (__cfg80211_unlink_bss(rdev, bss)) | |
| rdev->bss_generation++; | |
| } | |
| WARN_ON(atomic_read(&new->hold)); | |
| if (!WARN_ON(!__cfg80211_unlink_bss(rdev, new))) | |
| rdev->bss_generation++; | |
| } | |
| cfg80211_rehash_bss(rdev, cbss); | |
| list_for_each_entry_safe(nontrans_bss, tmp, | |
| &cbss->pub.nontrans_list, | |
| nontrans_list) { | |
| bss = bss_from_pub(nontrans_bss); | |
| bss->pub.channel = chan; | |
| cfg80211_rehash_bss(rdev, bss); | |
| } | |
| done: | |
| spin_unlock_bh(&rdev->bss_lock); | |
| } | |
| #ifdef CONFIG_CFG80211_WEXT | |
| static struct cfg80211_registered_device * | |
| cfg80211_get_dev_from_ifindex(struct net *net, int ifindex) | |
| { | |
| struct cfg80211_registered_device *rdev; | |
| struct net_device *dev; | |
| ASSERT_RTNL(); | |
| dev = dev_get_by_index(net, ifindex); | |
| if (!dev) | |
| return ERR_PTR(-ENODEV); | |
| if (dev->ieee80211_ptr) | |
| rdev = wiphy_to_rdev(dev->ieee80211_ptr->wiphy); | |
| else | |
| rdev = ERR_PTR(-ENODEV); | |
| dev_put(dev); | |
| return rdev; | |
| } | |
| int cfg80211_wext_siwscan(struct net_device *dev, | |
| struct iw_request_info *info, | |
| union iwreq_data *wrqu, char *extra) | |
| { | |
| struct cfg80211_registered_device *rdev; | |
| struct wiphy *wiphy; | |
| struct iw_scan_req *wreq = NULL; | |
| struct cfg80211_scan_request_int *creq; | |
| int i, err, n_channels = 0; | |
| enum nl80211_band band; | |
| if (!netif_running(dev)) | |
| return -ENETDOWN; | |
| if (wrqu->data.length == sizeof(struct iw_scan_req)) | |
| wreq = (struct iw_scan_req *)extra; | |
| rdev = cfg80211_get_dev_from_ifindex(dev_net(dev), dev->ifindex); | |
| if (IS_ERR(rdev)) | |
| return PTR_ERR(rdev); | |
| if (rdev->scan_req || rdev->scan_msg) | |
| return -EBUSY; | |
| wiphy = &rdev->wiphy; | |
| /* Determine number of channels, needed to allocate creq */ | |
| if (wreq && wreq->num_channels) { | |
| /* Passed from userspace so should be checked */ | |
| if (unlikely(wreq->num_channels > IW_MAX_FREQUENCIES)) | |
| return -EINVAL; | |
| n_channels = wreq->num_channels; | |
| } else { | |
| n_channels = ieee80211_get_num_supported_channels(wiphy); | |
| } | |
| creq = kzalloc(struct_size(creq, req.channels, n_channels) + | |
| sizeof(struct cfg80211_ssid), | |
| GFP_ATOMIC); | |
| if (!creq) | |
| return -ENOMEM; | |
| creq->req.wiphy = wiphy; | |
| creq->req.wdev = dev->ieee80211_ptr; | |
| /* SSIDs come after channels */ | |
| creq->req.ssids = (void *)creq + | |
| struct_size(creq, req.channels, n_channels); | |
| creq->req.n_channels = n_channels; | |
| creq->req.n_ssids = 1; | |
| creq->req.scan_start = jiffies; | |
| /* translate "Scan on frequencies" request */ | |
| i = 0; | |
| for (band = 0; band < NUM_NL80211_BANDS; band++) { | |
| int j; | |
| if (!wiphy->bands[band]) | |
| continue; | |
| for (j = 0; j < wiphy->bands[band]->n_channels; j++) { | |
| struct ieee80211_channel *chan; | |
| /* ignore disabled channels */ | |
| chan = &wiphy->bands[band]->channels[j]; | |
| if (chan->flags & IEEE80211_CHAN_DISABLED || | |
| !cfg80211_wdev_channel_allowed(creq->req.wdev, chan)) | |
| continue; | |
| /* If we have a wireless request structure and the | |
| * wireless request specifies frequencies, then search | |
| * for the matching hardware channel. | |
| */ | |
| if (wreq && wreq->num_channels) { | |
| int k; | |
| int wiphy_freq = wiphy->bands[band]->channels[j].center_freq; | |
| for (k = 0; k < wreq->num_channels; k++) { | |
| struct iw_freq *freq = | |
| &wreq->channel_list[k]; | |
| int wext_freq = | |
| cfg80211_wext_freq(freq); | |
| if (wext_freq == wiphy_freq) | |
| goto wext_freq_found; | |
| } | |
| goto wext_freq_not_found; | |
| } | |
| wext_freq_found: | |
| creq->req.channels[i] = | |
| &wiphy->bands[band]->channels[j]; | |
| i++; | |
| wext_freq_not_found: ; | |
| } | |
| } | |
| /* No channels found? */ | |
| if (!i) { | |
| err = -EINVAL; | |
| goto out; | |
| } | |
| /* Set real number of channels specified in creq->req.channels[] */ | |
| creq->req.n_channels = i; | |
| /* translate "Scan for SSID" request */ | |
| if (wreq) { | |
| if (wrqu->data.flags & IW_SCAN_THIS_ESSID) { | |
| if (wreq->essid_len > IEEE80211_MAX_SSID_LEN) { | |
| err = -EINVAL; | |
| goto out; | |
| } | |
| memcpy(creq->req.ssids[0].ssid, wreq->essid, | |
| wreq->essid_len); | |
| creq->req.ssids[0].ssid_len = wreq->essid_len; | |
| } | |
| if (wreq->scan_type == IW_SCAN_TYPE_PASSIVE) { | |
| creq->req.ssids = NULL; | |
| creq->req.n_ssids = 0; | |
| } | |
| } | |
| for (i = 0; i < NUM_NL80211_BANDS; i++) | |
| if (wiphy->bands[i]) | |
| creq->req.rates[i] = | |
| (1 << wiphy->bands[i]->n_bitrates) - 1; | |
| eth_broadcast_addr(creq->req.bssid); | |
| scoped_guard(wiphy, &rdev->wiphy) { | |
| rdev->scan_req = creq; | |
| err = rdev_scan(rdev, creq); | |
| if (err) { | |
| rdev->scan_req = NULL; | |
| /* creq will be freed below */ | |
| } else { | |
| nl80211_send_scan_start(rdev, dev->ieee80211_ptr); | |
| /* creq now owned by driver */ | |
| creq = NULL; | |
| dev_hold(dev); | |
| } | |
| } | |
| out: | |
| kfree(creq); | |
| return err; | |
| } | |
| static char *ieee80211_scan_add_ies(struct iw_request_info *info, | |
| const struct cfg80211_bss_ies *ies, | |
| char *current_ev, char *end_buf) | |
| { | |
| const u8 *pos, *end, *next; | |
| struct iw_event iwe; | |
| if (!ies) | |
| return current_ev; | |
| /* | |
| * If needed, fragment the IEs buffer (at IE boundaries) into short | |
| * enough fragments to fit into IW_GENERIC_IE_MAX octet messages. | |
| */ | |
| pos = ies->data; | |
| end = pos + ies->len; | |
| while (end - pos > IW_GENERIC_IE_MAX) { | |
| next = pos + 2 + pos[1]; | |
| while (next + 2 + next[1] - pos < IW_GENERIC_IE_MAX) | |
| next = next + 2 + next[1]; | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = IWEVGENIE; | |
| iwe.u.data.length = next - pos; | |
| current_ev = iwe_stream_add_point_check(info, current_ev, | |
| end_buf, &iwe, | |
| (void *)pos); | |
| if (IS_ERR(current_ev)) | |
| return current_ev; | |
| pos = next; | |
| } | |
| if (end > pos) { | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = IWEVGENIE; | |
| iwe.u.data.length = end - pos; | |
| current_ev = iwe_stream_add_point_check(info, current_ev, | |
| end_buf, &iwe, | |
| (void *)pos); | |
| if (IS_ERR(current_ev)) | |
| return current_ev; | |
| } | |
| return current_ev; | |
| } | |
| static char * | |
| ieee80211_bss(struct wiphy *wiphy, struct iw_request_info *info, | |
| struct cfg80211_internal_bss *bss, char *current_ev, | |
| char *end_buf) | |
| { | |
| const struct cfg80211_bss_ies *ies; | |
| struct iw_event iwe; | |
| const u8 *ie; | |
| u8 buf[50]; | |
| u8 *cfg, *p, *tmp; | |
| int rem, i, sig; | |
| bool ismesh = false; | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = SIOCGIWAP; | |
| iwe.u.ap_addr.sa_family = ARPHRD_ETHER; | |
| memcpy(iwe.u.ap_addr.sa_data, bss->pub.bssid, ETH_ALEN); | |
| current_ev = iwe_stream_add_event_check(info, current_ev, end_buf, &iwe, | |
| IW_EV_ADDR_LEN); | |
| if (IS_ERR(current_ev)) | |
| return current_ev; | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = SIOCGIWFREQ; | |
| iwe.u.freq.m = ieee80211_frequency_to_channel(bss->pub.channel->center_freq); | |
| iwe.u.freq.e = 0; | |
| current_ev = iwe_stream_add_event_check(info, current_ev, end_buf, &iwe, | |
| IW_EV_FREQ_LEN); | |
| if (IS_ERR(current_ev)) | |
| return current_ev; | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = SIOCGIWFREQ; | |
| iwe.u.freq.m = bss->pub.channel->center_freq; | |
| iwe.u.freq.e = 6; | |
| current_ev = iwe_stream_add_event_check(info, current_ev, end_buf, &iwe, | |
| IW_EV_FREQ_LEN); | |
| if (IS_ERR(current_ev)) | |
| return current_ev; | |
| if (wiphy->signal_type != CFG80211_SIGNAL_TYPE_NONE) { | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = IWEVQUAL; | |
| iwe.u.qual.updated = IW_QUAL_LEVEL_UPDATED | | |
| IW_QUAL_NOISE_INVALID | | |
| IW_QUAL_QUAL_UPDATED; | |
| switch (wiphy->signal_type) { | |
| case CFG80211_SIGNAL_TYPE_MBM: | |
| sig = bss->pub.signal / 100; | |
| iwe.u.qual.level = sig; | |
| iwe.u.qual.updated |= IW_QUAL_DBM; | |
| if (sig < -110) /* rather bad */ | |
| sig = -110; | |
| else if (sig > -40) /* perfect */ | |
| sig = -40; | |
| /* will give a range of 0 .. 70 */ | |
| iwe.u.qual.qual = sig + 110; | |
| break; | |
| case CFG80211_SIGNAL_TYPE_UNSPEC: | |
| iwe.u.qual.level = bss->pub.signal; | |
| /* will give range 0 .. 100 */ | |
| iwe.u.qual.qual = bss->pub.signal; | |
| break; | |
| default: | |
| /* not reached */ | |
| break; | |
| } | |
| current_ev = iwe_stream_add_event_check(info, current_ev, | |
| end_buf, &iwe, | |
| IW_EV_QUAL_LEN); | |
| if (IS_ERR(current_ev)) | |
| return current_ev; | |
| } | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = SIOCGIWENCODE; | |
| if (bss->pub.capability & WLAN_CAPABILITY_PRIVACY) | |
| iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; | |
| else | |
| iwe.u.data.flags = IW_ENCODE_DISABLED; | |
| iwe.u.data.length = 0; | |
| current_ev = iwe_stream_add_point_check(info, current_ev, end_buf, | |
| &iwe, ""); | |
| if (IS_ERR(current_ev)) | |
| return current_ev; | |
| rcu_read_lock(); | |
| ies = rcu_dereference(bss->pub.ies); | |
| rem = ies->len; | |
| ie = ies->data; | |
| while (rem >= 2) { | |
| /* invalid data */ | |
| if (ie[1] > rem - 2) | |
| break; | |
| switch (ie[0]) { | |
| case WLAN_EID_SSID: | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = SIOCGIWESSID; | |
| iwe.u.data.length = ie[1]; | |
| iwe.u.data.flags = 1; | |
| current_ev = iwe_stream_add_point_check(info, | |
| current_ev, | |
| end_buf, &iwe, | |
| (u8 *)ie + 2); | |
| if (IS_ERR(current_ev)) | |
| goto unlock; | |
| break; | |
| case WLAN_EID_MESH_ID: | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = SIOCGIWESSID; | |
| iwe.u.data.length = ie[1]; | |
| iwe.u.data.flags = 1; | |
| current_ev = iwe_stream_add_point_check(info, | |
| current_ev, | |
| end_buf, &iwe, | |
| (u8 *)ie + 2); | |
| if (IS_ERR(current_ev)) | |
| goto unlock; | |
| break; | |
| case WLAN_EID_MESH_CONFIG: | |
| ismesh = true; | |
| if (ie[1] != sizeof(struct ieee80211_meshconf_ie)) | |
| break; | |
| cfg = (u8 *)ie + 2; | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = IWEVCUSTOM; | |
| iwe.u.data.length = sprintf(buf, | |
| "Mesh Network Path Selection Protocol ID: 0x%02X", | |
| cfg[0]); | |
| current_ev = iwe_stream_add_point_check(info, | |
| current_ev, | |
| end_buf, | |
| &iwe, buf); | |
| if (IS_ERR(current_ev)) | |
| goto unlock; | |
| iwe.u.data.length = sprintf(buf, | |
| "Path Selection Metric ID: 0x%02X", | |
| cfg[1]); | |
| current_ev = iwe_stream_add_point_check(info, | |
| current_ev, | |
| end_buf, | |
| &iwe, buf); | |
| if (IS_ERR(current_ev)) | |
| goto unlock; | |
| iwe.u.data.length = sprintf(buf, | |
| "Congestion Control Mode ID: 0x%02X", | |
| cfg[2]); | |
| current_ev = iwe_stream_add_point_check(info, | |
| current_ev, | |
| end_buf, | |
| &iwe, buf); | |
| if (IS_ERR(current_ev)) | |
| goto unlock; | |
| iwe.u.data.length = sprintf(buf, | |
| "Synchronization ID: 0x%02X", | |
| cfg[3]); | |
| current_ev = iwe_stream_add_point_check(info, | |
| current_ev, | |
| end_buf, | |
| &iwe, buf); | |
| if (IS_ERR(current_ev)) | |
| goto unlock; | |
| iwe.u.data.length = sprintf(buf, | |
| "Authentication ID: 0x%02X", | |
| cfg[4]); | |
| current_ev = iwe_stream_add_point_check(info, | |
| current_ev, | |
| end_buf, | |
| &iwe, buf); | |
| if (IS_ERR(current_ev)) | |
| goto unlock; | |
| iwe.u.data.length = sprintf(buf, | |
| "Formation Info: 0x%02X", | |
| cfg[5]); | |
| current_ev = iwe_stream_add_point_check(info, | |
| current_ev, | |
| end_buf, | |
| &iwe, buf); | |
| if (IS_ERR(current_ev)) | |
| goto unlock; | |
| iwe.u.data.length = sprintf(buf, | |
| "Capabilities: 0x%02X", | |
| cfg[6]); | |
| current_ev = iwe_stream_add_point_check(info, | |
| current_ev, | |
| end_buf, | |
| &iwe, buf); | |
| if (IS_ERR(current_ev)) | |
| goto unlock; | |
| break; | |
| case WLAN_EID_SUPP_RATES: | |
| case WLAN_EID_EXT_SUPP_RATES: | |
| /* display all supported rates in readable format */ | |
| p = current_ev + iwe_stream_lcp_len(info); | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = SIOCGIWRATE; | |
| /* Those two flags are ignored... */ | |
| iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0; | |
| for (i = 0; i < ie[1]; i++) { | |
| iwe.u.bitrate.value = | |
| ((ie[i + 2] & 0x7f) * 500000); | |
| tmp = p; | |
| p = iwe_stream_add_value(info, current_ev, p, | |
| end_buf, &iwe, | |
| IW_EV_PARAM_LEN); | |
| if (p == tmp) { | |
| current_ev = ERR_PTR(-E2BIG); | |
| goto unlock; | |
| } | |
| } | |
| current_ev = p; | |
| break; | |
| } | |
| rem -= ie[1] + 2; | |
| ie += ie[1] + 2; | |
| } | |
| if (bss->pub.capability & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS) || | |
| ismesh) { | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = SIOCGIWMODE; | |
| if (ismesh) | |
| iwe.u.mode = IW_MODE_MESH; | |
| else if (bss->pub.capability & WLAN_CAPABILITY_ESS) | |
| iwe.u.mode = IW_MODE_MASTER; | |
| else | |
| iwe.u.mode = IW_MODE_ADHOC; | |
| current_ev = iwe_stream_add_event_check(info, current_ev, | |
| end_buf, &iwe, | |
| IW_EV_UINT_LEN); | |
| if (IS_ERR(current_ev)) | |
| goto unlock; | |
| } | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = IWEVCUSTOM; | |
| iwe.u.data.length = sprintf(buf, "tsf=%016llx", | |
| (unsigned long long)(ies->tsf)); | |
| current_ev = iwe_stream_add_point_check(info, current_ev, end_buf, | |
| &iwe, buf); | |
| if (IS_ERR(current_ev)) | |
| goto unlock; | |
| memset(&iwe, 0, sizeof(iwe)); | |
| iwe.cmd = IWEVCUSTOM; | |
| iwe.u.data.length = sprintf(buf, " Last beacon: %ums ago", | |
| elapsed_jiffies_msecs(bss->ts)); | |
| current_ev = iwe_stream_add_point_check(info, current_ev, | |
| end_buf, &iwe, buf); | |
| if (IS_ERR(current_ev)) | |
| goto unlock; | |
| current_ev = ieee80211_scan_add_ies(info, ies, current_ev, end_buf); | |
| unlock: | |
| rcu_read_unlock(); | |
| return current_ev; | |
| } | |
| static int ieee80211_scan_results(struct cfg80211_registered_device *rdev, | |
| struct iw_request_info *info, | |
| char *buf, size_t len) | |
| { | |
| char *current_ev = buf; | |
| char *end_buf = buf + len; | |
| struct cfg80211_internal_bss *bss; | |
| int err = 0; | |
| spin_lock_bh(&rdev->bss_lock); | |
| cfg80211_bss_expire(rdev); | |
| list_for_each_entry(bss, &rdev->bss_list, list) { | |
| if (buf + len - current_ev <= IW_EV_ADDR_LEN) { | |
| err = -E2BIG; | |
| break; | |
| } | |
| current_ev = ieee80211_bss(&rdev->wiphy, info, bss, | |
| current_ev, end_buf); | |
| if (IS_ERR(current_ev)) { | |
| err = PTR_ERR(current_ev); | |
| break; | |
| } | |
| } | |
| spin_unlock_bh(&rdev->bss_lock); | |
| if (err) | |
| return err; | |
| return current_ev - buf; | |
| } | |
| int cfg80211_wext_giwscan(struct net_device *dev, | |
| struct iw_request_info *info, | |
| union iwreq_data *wrqu, char *extra) | |
| { | |
| struct iw_point *data = &wrqu->data; | |
| struct cfg80211_registered_device *rdev; | |
| int res; | |
| if (!netif_running(dev)) | |
| return -ENETDOWN; | |
| rdev = cfg80211_get_dev_from_ifindex(dev_net(dev), dev->ifindex); | |
| if (IS_ERR(rdev)) | |
| return PTR_ERR(rdev); | |
| if (rdev->scan_req || rdev->scan_msg) | |
| return -EAGAIN; | |
| res = ieee80211_scan_results(rdev, info, extra, data->length); | |
| data->length = 0; | |
| if (res >= 0) { | |
| data->length = res; | |
| res = 0; | |
| } | |
| return res; | |
| } | |
| #endif |