| # | |
| # Hardware monitoring chip drivers configuration | |
| # | |
| menuconfig HWMON | |
| tristate "Hardware Monitoring support" | |
| depends on HAS_IOMEM | |
| default y | |
| help | |
| Hardware monitoring devices let you monitor the hardware health | |
| of a system. Most modern motherboards include such a device. It | |
| can include temperature sensors, voltage sensors, fan speed | |
| sensors and various additional features such as the ability to | |
| control the speed of the fans. If you want this support you | |
| should say Y here and also to the specific driver(s) for your | |
| sensors chip(s) below. | |
| To find out which specific driver(s) you need, use the | |
| sensors-detect script from the lm_sensors package. Read | |
| <file:Documentation/hwmon/userspace-tools> for details. | |
| This support can also be built as a module. If so, the module | |
| will be called hwmon. | |
| if HWMON | |
| config HWMON_VID | |
| tristate | |
| default n | |
| config HWMON_DEBUG_CHIP | |
| bool "Hardware Monitoring Chip debugging messages" | |
| default n | |
| help | |
| Say Y here if you want the I2C chip drivers to produce a bunch of | |
| debug messages to the system log. Select this if you are having | |
| a problem with I2C support and want to see more of what is going | |
| on. | |
| comment "Native drivers" | |
| config SENSORS_AB8500 | |
| tristate "AB8500 thermal monitoring" | |
| depends on AB8500_GPADC && AB8500_BM | |
| default n | |
| help | |
| If you say yes here you get support for the thermal sensor part | |
| of the AB8500 chip. The driver includes thermal management for | |
| AB8500 die and two GPADC channels. The GPADC channel are preferably | |
| used to access sensors outside the AB8500 chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called abx500-temp. | |
| config SENSORS_ABITUGURU | |
| tristate "Abit uGuru (rev 1 & 2)" | |
| depends on X86 && DMI | |
| help | |
| If you say yes here you get support for the sensor part of the first | |
| and second revision of the Abit uGuru chip. The voltage and frequency | |
| control parts of the Abit uGuru are not supported. The Abit uGuru | |
| chip can be found on Abit uGuru featuring motherboards (most modern | |
| Abit motherboards from before end 2005). For more info and a list | |
| of which motherboards have which revision see | |
| Documentation/hwmon/abituguru | |
| This driver can also be built as a module. If so, the module | |
| will be called abituguru. | |
| config SENSORS_ABITUGURU3 | |
| tristate "Abit uGuru (rev 3)" | |
| depends on X86 && DMI | |
| help | |
| If you say yes here you get support for the sensor part of the | |
| third revision of the Abit uGuru chip. Only reading the sensors | |
| and their settings is supported. The third revision of the Abit | |
| uGuru chip can be found on recent Abit motherboards (since end | |
| 2005). For more info and a list of which motherboards have which | |
| revision see Documentation/hwmon/abituguru3 | |
| This driver can also be built as a module. If so, the module | |
| will be called abituguru3. | |
| config SENSORS_AD7314 | |
| tristate "Analog Devices AD7314 and compatibles" | |
| depends on SPI | |
| help | |
| If you say yes here you get support for the Analog Devices | |
| AD7314, ADT7301 and ADT7302 temperature sensors. | |
| This driver can also be built as a module. If so, the module | |
| will be called ad7314. | |
| config SENSORS_AD7414 | |
| tristate "Analog Devices AD7414" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Analog Devices | |
| AD7414 temperature monitoring chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called ad7414. | |
| config SENSORS_AD7418 | |
| tristate "Analog Devices AD7416, AD7417 and AD7418" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Analog Devices | |
| AD7416, AD7417 and AD7418 temperature monitoring chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called ad7418. | |
| config SENSORS_ADM1021 | |
| tristate "Analog Devices ADM1021 and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Analog Devices ADM1021 | |
| and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, | |
| Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. | |
| This driver can also be built as a module. If so, the module | |
| will be called adm1021. | |
| config SENSORS_ADM1025 | |
| tristate "Analog Devices ADM1025 and compatibles" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for Analog Devices ADM1025 | |
| and Philips NE1619 sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called adm1025. | |
| config SENSORS_ADM1026 | |
| tristate "Analog Devices ADM1026 and compatibles" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for Analog Devices ADM1026 | |
| sensor chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called adm1026. | |
| config SENSORS_ADM1029 | |
| tristate "Analog Devices ADM1029" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Analog Devices ADM1029 | |
| sensor chip. | |
| Very rare chip, please let us know you use it. | |
| This driver can also be built as a module. If so, the module | |
| will be called adm1029. | |
| config SENSORS_ADM1031 | |
| tristate "Analog Devices ADM1031 and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Analog Devices ADM1031 | |
| and ADM1030 sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called adm1031. | |
| config SENSORS_ADM9240 | |
| tristate "Analog Devices ADM9240 and compatibles" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for Analog Devices ADM9240, | |
| Dallas DS1780, National Semiconductor LM81 sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called adm9240. | |
| config SENSORS_ADT7X10 | |
| tristate | |
| help | |
| This module contains common code shared by the ADT7310/ADT7320 and | |
| ADT7410/ADT7420 temperature monitoring chip drivers. | |
| If build as a module, the module will be called adt7x10. | |
| config SENSORS_ADT7310 | |
| tristate "Analog Devices ADT7310/ADT7320" | |
| depends on SPI_MASTER | |
| select SENSORS_ADT7X10 | |
| help | |
| If you say yes here you get support for the Analog Devices | |
| ADT7310 and ADT7320 temperature monitoring chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called adt7310. | |
| config SENSORS_ADT7410 | |
| tristate "Analog Devices ADT7410/ADT7420" | |
| depends on I2C | |
| select SENSORS_ADT7X10 | |
| help | |
| If you say yes here you get support for the Analog Devices | |
| ADT7410 and ADT7420 temperature monitoring chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called adt7410. | |
| config SENSORS_ADT7411 | |
| tristate "Analog Devices ADT7411" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Analog Devices | |
| ADT7411 voltage and temperature monitoring chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called adt7411. | |
| config SENSORS_ADT7462 | |
| tristate "Analog Devices ADT7462" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Analog Devices | |
| ADT7462 temperature monitoring chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called adt7462. | |
| config SENSORS_ADT7470 | |
| tristate "Analog Devices ADT7470" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Analog Devices | |
| ADT7470 temperature monitoring chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called adt7470. | |
| config SENSORS_ADT7475 | |
| tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the Analog Devices | |
| ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring | |
| chips. | |
| This driver can also be build as a module. If so, the module | |
| will be called adt7475. | |
| config SENSORS_ASC7621 | |
| tristate "Andigilog aSC7621" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the aSC7621 | |
| family of SMBus sensors chip found on most Intel X38, X48, X58, | |
| 945, 965 and 975 desktop boards. Currently supported chips: | |
| aSC7621 | |
| aSC7621a | |
| This driver can also be built as a module. If so, the module | |
| will be called asc7621. | |
| config SENSORS_K8TEMP | |
| tristate "AMD Athlon64/FX or Opteron temperature sensor" | |
| depends on X86 && PCI | |
| help | |
| If you say yes here you get support for the temperature | |
| sensor(s) inside your CPU. Supported is whole AMD K8 | |
| microarchitecture. Please note that you will need at least | |
| lm-sensors 2.10.1 for proper userspace support. | |
| This driver can also be built as a module. If so, the module | |
| will be called k8temp. | |
| config SENSORS_K10TEMP | |
| tristate "AMD Family 10h+ temperature sensor" | |
| depends on X86 && PCI | |
| help | |
| If you say yes here you get support for the temperature | |
| sensor(s) inside your CPU. Supported are later revisions of | |
| the AMD Family 10h and all revisions of the AMD Family 11h, | |
| 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo) | |
| and 16h (Kabini/Mullins) microarchitectures. | |
| This driver can also be built as a module. If so, the module | |
| will be called k10temp. | |
| config SENSORS_FAM15H_POWER | |
| tristate "AMD Family 15h processor power" | |
| depends on X86 && PCI && CPU_SUP_AMD | |
| help | |
| If you say yes here you get support for processor power | |
| information of your AMD family 15h CPU. | |
| This driver can also be built as a module. If so, the module | |
| will be called fam15h_power. | |
| config SENSORS_APPLESMC | |
| tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" | |
| depends on INPUT && X86 | |
| select NEW_LEDS | |
| select LEDS_CLASS | |
| select INPUT_POLLDEV | |
| default n | |
| help | |
| This driver provides support for the Apple System Management | |
| Controller, which provides an accelerometer (Apple Sudden Motion | |
| Sensor), light sensors, temperature sensors, keyboard backlight | |
| control and fan control. | |
| Only Intel-based Apple's computers are supported (MacBook Pro, | |
| MacBook, MacMini). | |
| Data from the different sensors, keyboard backlight control and fan | |
| control are accessible via sysfs. | |
| This driver also provides an absolute input class device, allowing | |
| the laptop to act as a pinball machine-esque joystick. | |
| Say Y here if you have an applicable laptop and want to experience | |
| the awesome power of applesmc. | |
| config SENSORS_ARM_SCPI | |
| tristate "ARM SCPI Sensors" | |
| depends on ARM_SCPI_PROTOCOL | |
| depends on THERMAL || !THERMAL_OF | |
| help | |
| This driver provides support for temperature, voltage, current | |
| and power sensors available on ARM Ltd's SCP based platforms. The | |
| actual number and type of sensors exported depend on the platform. | |
| config SENSORS_ASB100 | |
| tristate "Asus ASB100 Bach" | |
| depends on X86 && I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the ASB100 Bach sensor | |
| chip found on some Asus mainboards. | |
| This driver can also be built as a module. If so, the module | |
| will be called asb100. | |
| config SENSORS_ASPEED | |
| tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver" | |
| depends on THERMAL || THERMAL=n | |
| select REGMAP | |
| help | |
| This driver provides support for ASPEED AST2400/AST2500 PWM | |
| and Fan Tacho controllers. | |
| This driver can also be built as a module. If so, the module | |
| will be called aspeed_pwm_tacho. | |
| config SENSORS_ATXP1 | |
| tristate "Attansic ATXP1 VID controller" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the Attansic ATXP1 VID | |
| controller. | |
| If your board have such a chip, you are able to control your CPU | |
| core and other voltages. | |
| This driver can also be built as a module. If so, the module | |
| will be called atxp1. | |
| config SENSORS_DS620 | |
| tristate "Dallas Semiconductor DS620" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Dallas Semiconductor | |
| DS620 sensor chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called ds620. | |
| config SENSORS_DS1621 | |
| tristate "Dallas Semiconductor DS1621 and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Dallas Semiconductor/Maxim | |
| Integrated DS1621 sensor chips and compatible models including: | |
| - Dallas Semiconductor DS1625 | |
| - Maxim Integrated DS1631 | |
| - Maxim Integrated DS1721 | |
| - Maxim Integrated DS1731 | |
| This driver can also be built as a module. If so, the module | |
| will be called ds1621. | |
| config SENSORS_DELL_SMM | |
| tristate "Dell laptop SMM BIOS hwmon driver" | |
| depends on X86 | |
| help | |
| This hwmon driver adds support for reporting temperature of different | |
| sensors and controls the fans on Dell laptops via System Management | |
| Mode provided by Dell BIOS. | |
| When option I8K is also enabled this driver provides legacy /proc/i8k | |
| userspace interface for i8kutils package. | |
| config SENSORS_DA9052_ADC | |
| tristate "Dialog DA9052/DA9053 ADC" | |
| depends on PMIC_DA9052 | |
| help | |
| Say y here to support the ADC found on Dialog Semiconductor | |
| DA9052-BC and DA9053-AA/Bx PMICs. | |
| This driver can also be built as module. If so, the module | |
| will be called da9052-hwmon. | |
| config SENSORS_DA9055 | |
| tristate "Dialog Semiconductor DA9055 ADC" | |
| depends on MFD_DA9055 | |
| help | |
| If you say yes here you get support for ADC on the Dialog | |
| Semiconductor DA9055 PMIC. | |
| This driver can also be built as a module. If so, the module | |
| will be called da9055-hwmon. | |
| config SENSORS_I5K_AMB | |
| tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" | |
| depends on PCI | |
| help | |
| If you say yes here you get support for FB-DIMM AMB temperature | |
| monitoring chips on systems with the Intel 5000 series chipset. | |
| This driver can also be built as a module. If so, the module | |
| will be called i5k_amb. | |
| config SENSORS_F71805F | |
| tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" | |
| depends on !PPC | |
| help | |
| If you say yes here you get support for hardware monitoring | |
| features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG | |
| Super-I/O chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called f71805f. | |
| config SENSORS_F71882FG | |
| tristate "Fintek F71882FG and compatibles" | |
| depends on !PPC | |
| help | |
| If you say yes here you get support for hardware monitoring | |
| features of many Fintek Super-I/O (LPC) chips. The currently | |
| supported chips are: | |
| F71808E/A | |
| F71858FG | |
| F71862FG | |
| F71863FG | |
| F71869F/E/A | |
| F71882FG | |
| F71883FG | |
| F71889FG/ED/A | |
| F8000 | |
| F81801U | |
| F81865F | |
| This driver can also be built as a module. If so, the module | |
| will be called f71882fg. | |
| config SENSORS_F75375S | |
| tristate "Fintek F75375S/SP, F75373 and F75387" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for hardware monitoring | |
| features of the Fintek F75375S/SP, F75373 and F75387 | |
| This driver can also be built as a module. If so, the module | |
| will be called f75375s. | |
| config SENSORS_MC13783_ADC | |
| tristate "Freescale MC13783/MC13892 ADC" | |
| depends on MFD_MC13XXX | |
| help | |
| Support for the A/D converter on MC13783 and MC13892 PMIC. | |
| config SENSORS_FSCHMD | |
| tristate "Fujitsu Siemens Computers sensor chips" | |
| depends on X86 && I2C | |
| help | |
| If you say yes here you get support for the following Fujitsu | |
| Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, | |
| Heimdall, Heracles, Hades and Syleus including support for the | |
| integrated watchdog. | |
| This is a merged driver for FSC sensor chips replacing the fscpos, | |
| fscscy and fscher drivers and adding support for several other FSC | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called fschmd. | |
| config SENSORS_FTSTEUTATES | |
| tristate "Fujitsu Technology Solutions sensor chip Teutates" | |
| depends on I2C && WATCHDOG | |
| select WATCHDOG_CORE | |
| help | |
| If you say yes here you get support for the Fujitsu Technology | |
| Solutions (FTS) sensor chip "Teutates" including support for | |
| the integrated watchdog. | |
| This driver can also be built as a module. If so, the module | |
| will be called ftsteutates. | |
| config SENSORS_GL518SM | |
| tristate "Genesys Logic GL518SM" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Genesys Logic GL518SM | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called gl518sm. | |
| config SENSORS_GL520SM | |
| tristate "Genesys Logic GL520SM" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for Genesys Logic GL520SM | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called gl520sm. | |
| config SENSORS_G760A | |
| tristate "GMT G760A" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Global Mixed-mode | |
| Technology Inc G760A fan speed PWM controller chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called g760a. | |
| config SENSORS_G762 | |
| tristate "GMT G762 and G763" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Global Mixed-mode | |
| Technology Inc G762 and G763 fan speed PWM controller chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called g762. | |
| config SENSORS_GPIO_FAN | |
| tristate "GPIO fan" | |
| depends on GPIOLIB || COMPILE_TEST | |
| depends on THERMAL || THERMAL=n | |
| help | |
| If you say yes here you get support for fans connected to GPIO lines. | |
| This driver can also be built as a module. If so, the module | |
| will be called gpio-fan. | |
| config SENSORS_HIH6130 | |
| tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Honeywell Humidicon | |
| HIH-6130 and HIH-6131 Humidicon humidity sensors. | |
| This driver can also be built as a module. If so, the module | |
| will be called hih6130. | |
| config SENSORS_IBMAEM | |
| tristate "IBM Active Energy Manager temperature/power sensors and control" | |
| select IPMI_SI | |
| depends on IPMI_HANDLER | |
| help | |
| If you say yes here you get support for the temperature and | |
| power sensors and capping hardware in various IBM System X | |
| servers that support Active Energy Manager. This includes | |
| the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, | |
| and certain HC10/HS2x/LS2x/QS2x blades. | |
| This driver can also be built as a module. If so, the module | |
| will be called ibmaem. | |
| config SENSORS_IBMPEX | |
| tristate "IBM PowerExecutive temperature/power sensors" | |
| select IPMI_SI | |
| depends on IPMI_HANDLER | |
| help | |
| If you say yes here you get support for the temperature and | |
| power sensors in various IBM System X servers that support | |
| PowerExecutive. So far this includes the x3350, x3550, x3650, | |
| x3655, and x3755; the x3800, x3850, and x3950 models that have | |
| PCI Express; and some of the HS2x, LS2x, and QS2x blades. | |
| This driver can also be built as a module. If so, the module | |
| will be called ibmpex. | |
| config SENSORS_IBMPOWERNV | |
| tristate "IBM POWERNV platform sensors" | |
| depends on PPC_POWERNV | |
| default y | |
| help | |
| If you say yes here you get support for the temperature/fan/power | |
| sensors on your PowerNV platform. | |
| This driver can also be built as a module. If so, the module | |
| will be called ibmpowernv. | |
| config SENSORS_IIO_HWMON | |
| tristate "Hwmon driver that uses channels specified via iio maps" | |
| depends on IIO | |
| help | |
| This is a platform driver that in combination with a suitable | |
| map allows IIO devices to provide basic hwmon functionality | |
| for those channels specified in the map. This map can be provided | |
| either via platform data or the device tree bindings. | |
| config SENSORS_I5500 | |
| tristate "Intel 5500/5520/X58 temperature sensor" | |
| depends on X86 && PCI | |
| help | |
| If you say yes here you get support for the temperature | |
| sensor inside the Intel 5500, 5520 and X58 chipsets. | |
| This driver can also be built as a module. If so, the module | |
| will be called i5500_temp. | |
| config SENSORS_CORETEMP | |
| tristate "Intel Core/Core2/Atom temperature sensor" | |
| depends on X86 | |
| help | |
| If you say yes here you get support for the temperature | |
| sensor inside your CPU. Most of the family 6 CPUs | |
| are supported. Check Documentation/hwmon/coretemp for details. | |
| config SENSORS_IT87 | |
| tristate "ITE IT87xx and compatibles" | |
| depends on !PPC | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F, | |
| IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E, | |
| IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, | |
| IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950 | |
| clone. | |
| This driver can also be built as a module. If so, the module | |
| will be called it87. | |
| config SENSORS_JZ4740 | |
| tristate "Ingenic JZ4740 SoC ADC driver" | |
| depends on MACH_JZ4740 && MFD_JZ4740_ADC | |
| help | |
| If you say yes here you get support for reading adc values from the ADCIN | |
| pin on Ingenic JZ4740 SoC based boards. | |
| This driver can also be build as a module. If so, the module will be | |
| called jz4740-hwmon. | |
| config SENSORS_JC42 | |
| tristate "JEDEC JC42.4 compliant memory module temperature sensors" | |
| depends on I2C | |
| help | |
| If you say yes here, you get support for JEDEC JC42.4 compliant | |
| temperature sensors, which are used on many DDR3 memory modules for | |
| mobile devices and servers. Support will include, but not be limited | |
| to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, | |
| MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, | |
| STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001. | |
| This driver can also be built as a module. If so, the module | |
| will be called jc42. | |
| config SENSORS_POWR1220 | |
| tristate "Lattice POWR1220 Power Monitoring" | |
| depends on I2C | |
| default n | |
| help | |
| If you say yes here you get access to the hardware monitoring | |
| functions of the Lattice POWR1220 isp Power Supply Monitoring, | |
| Sequencing and Margining Controller. | |
| This driver can also be built as a module. If so, the module | |
| will be called powr1220. | |
| config SENSORS_LINEAGE | |
| tristate "Lineage Compact Power Line Power Entry Module" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Lineage Compact Power Line | |
| series of DC/DC and AC/DC converters such as CP1800, CP2000AC, | |
| CP2000DC, CP2725, and others. | |
| This driver can also be built as a module. If so, the module | |
| will be called lineage-pem. | |
| config SENSORS_LTC2945 | |
| tristate "Linear Technology LTC2945" | |
| depends on I2C | |
| select REGMAP_I2C | |
| default n | |
| help | |
| If you say yes here you get support for Linear Technology LTC2945 | |
| I2C System Monitor. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc2945. | |
| config SENSORS_LTC2990 | |
| tristate "Linear Technology LTC2990 (current monitoring mode only)" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Linear Technology LTC2990 | |
| I2C System Monitor. The LTC2990 supports a combination of voltage, | |
| current and temperature monitoring, but in addition to the Vcc supply | |
| voltage and chip temperature, this driver currently only supports | |
| reading two currents by measuring two differential voltages across | |
| series resistors. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc2990. | |
| config SENSORS_LTC4151 | |
| tristate "Linear Technology LTC4151" | |
| depends on I2C | |
| default n | |
| help | |
| If you say yes here you get support for Linear Technology LTC4151 | |
| High Voltage I2C Current and Voltage Monitor interface. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc4151. | |
| config SENSORS_LTC4215 | |
| tristate "Linear Technology LTC4215" | |
| depends on I2C | |
| default n | |
| help | |
| If you say yes here you get support for Linear Technology LTC4215 | |
| Hot Swap Controller I2C interface. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc4215. | |
| config SENSORS_LTC4222 | |
| tristate "Linear Technology LTC4222" | |
| depends on I2C | |
| select REGMAP_I2C | |
| default n | |
| help | |
| If you say yes here you get support for Linear Technology LTC4222 | |
| Dual Hot Swap Controller I2C interface. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc4222. | |
| config SENSORS_LTC4245 | |
| tristate "Linear Technology LTC4245" | |
| depends on I2C | |
| default n | |
| help | |
| If you say yes here you get support for Linear Technology LTC4245 | |
| Multiple Supply Hot Swap Controller I2C interface. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc4245. | |
| config SENSORS_LTC4260 | |
| tristate "Linear Technology LTC4260" | |
| depends on I2C | |
| select REGMAP_I2C | |
| default n | |
| help | |
| If you say yes here you get support for Linear Technology LTC4260 | |
| Positive Voltage Hot Swap Controller I2C interface. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc4260. | |
| config SENSORS_LTC4261 | |
| tristate "Linear Technology LTC4261" | |
| depends on I2C | |
| default n | |
| help | |
| If you say yes here you get support for Linear Technology LTC4261 | |
| Negative Voltage Hot Swap Controller I2C interface. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc4261. | |
| config SENSORS_LTQ_CPUTEMP | |
| bool "Lantiq cpu temperature sensor driver" | |
| depends on LANTIQ | |
| help | |
| If you say yes here you get support for the temperature | |
| sensor inside your CPU. | |
| config SENSORS_MAX1111 | |
| tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" | |
| depends on SPI_MASTER | |
| help | |
| Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 | |
| ADC chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called max1111. | |
| config SENSORS_MAX16065 | |
| tristate "Maxim MAX16065 System Manager and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for hardware monitoring | |
| capabilities of the following Maxim System Manager chips. | |
| MAX16065 | |
| MAX16066 | |
| MAX16067 | |
| MAX16068 | |
| MAX16070 | |
| MAX16071 | |
| This driver can also be built as a module. If so, the module | |
| will be called max16065. | |
| config SENSORS_MAX1619 | |
| tristate "Maxim MAX1619 sensor chip" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for MAX1619 sensor chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called max1619. | |
| config SENSORS_MAX1668 | |
| tristate "Maxim MAX1668 and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for MAX1668, MAX1989 and | |
| MAX1805 chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called max1668. | |
| config SENSORS_MAX197 | |
| tristate "Maxim MAX197 and compatibles" | |
| help | |
| Support for the Maxim MAX197 A/D converter. | |
| Support will include, but not be limited to, MAX197, and MAX199. | |
| This driver can also be built as a module. If so, the module | |
| will be called max197. | |
| config SENSORS_MAX31722 | |
| tristate "MAX31722 temperature sensor" | |
| depends on SPI | |
| help | |
| Support for the Maxim Integrated MAX31722/MAX31723 digital | |
| thermometers/thermostats operating over an SPI interface. | |
| This driver can also be built as a module. If so, the module | |
| will be called max31722. | |
| config SENSORS_MAX6639 | |
| tristate "Maxim MAX6639 sensor chip" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the MAX6639 | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called max6639. | |
| config SENSORS_MAX6642 | |
| tristate "Maxim MAX6642 sensor chip" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for MAX6642 sensor chip. | |
| MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor | |
| with Overtemperature Alarm from Maxim. | |
| This driver can also be built as a module. If so, the module | |
| will be called max6642. | |
| config SENSORS_MAX6650 | |
| tristate "Maxim MAX6650 sensor chip" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the MAX6650 / MAX6651 | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called max6650. | |
| config SENSORS_MAX6697 | |
| tristate "Maxim MAX6697 and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for MAX6581, MAX6602, MAX6622, | |
| MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 | |
| temperature sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called max6697. | |
| config SENSORS_MAX31790 | |
| tristate "Maxim MAX31790 sensor chip" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for 6-Channel PWM-Output | |
| Fan RPM Controller. | |
| This driver can also be built as a module. If so, the module | |
| will be called max31790. | |
| config SENSORS_MCP3021 | |
| tristate "Microchip MCP3021 and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for MCP3021 and MCP3221. | |
| The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 | |
| with 12-bit resolution. | |
| This driver can also be built as a module. If so, the module | |
| will be called mcp3021. | |
| config SENSORS_TC654 | |
| tristate "Microchip TC654/TC655 and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for TC654 and TC655. | |
| The TC654 and TC655 are PWM mode fan speed controllers with | |
| FanSense technology for use with brushless DC fans. | |
| This driver can also be built as a module. If so, the module | |
| will be called tc654. | |
| config SENSORS_MENF21BMC_HWMON | |
| tristate "MEN 14F021P00 BMC Hardware Monitoring" | |
| depends on MFD_MENF21BMC | |
| help | |
| Say Y here to include support for the MEN 14F021P00 BMC | |
| hardware monitoring. | |
| This driver can also be built as a module. If so the module | |
| will be called menf21bmc_hwmon. | |
| config SENSORS_ADCXX | |
| tristate "National Semiconductor ADCxxxSxxx" | |
| depends on SPI_MASTER | |
| help | |
| If you say yes here you get support for the National Semiconductor | |
| ADC<bb><c>S<sss> chip family, where | |
| * bb is the resolution in number of bits (8, 10, 12) | |
| * c is the number of channels (1, 2, 4, 8) | |
| * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 | |
| kSPS and 101 for 1 MSPS) | |
| Examples : ADC081S101, ADC124S501, ... | |
| This driver can also be built as a module. If so, the module | |
| will be called adcxx. | |
| config SENSORS_LM63 | |
| tristate "National Semiconductor LM63 and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the National | |
| Semiconductor LM63, LM64, and LM96163 remote diode digital temperature | |
| sensors with integrated fan control. Such chips are found | |
| on the Tyan S4882 (Thunder K8QS Pro) motherboard, among | |
| others. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm63. | |
| config SENSORS_LM70 | |
| tristate "National Semiconductor LM70 and compatibles" | |
| depends on SPI_MASTER | |
| help | |
| If you say yes here you get support for the National Semiconductor | |
| LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera- | |
| ture sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm70. | |
| config SENSORS_LM73 | |
| tristate "National Semiconductor LM73" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for National Semiconductor LM73 | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm73. | |
| config SENSORS_LM75 | |
| tristate "National Semiconductor LM75 and compatibles" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for one common type of | |
| temperature sensor chip, with models including: | |
| - Analog Devices ADT75 | |
| - Dallas Semiconductor DS75, DS1775 and DS7505 | |
| - Global Mixed-mode Technology (GMT) G751 | |
| - Maxim MAX6625 and MAX6626 | |
| - Microchip MCP980x | |
| - National Semiconductor LM75, LM75A | |
| - NXP's LM75A | |
| - ST Microelectronics STDS75 | |
| - TelCom (now Microchip) TCN75 | |
| - Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, | |
| TMP175, TMP275 | |
| This driver supports driver model based binding through board | |
| specific I2C device tables. | |
| It also supports the "legacy" style of driver binding. To use | |
| that with some chips which don't replicate LM75 quirks exactly, | |
| you may need the "force" module parameter. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm75. | |
| config SENSORS_LM77 | |
| tristate "National Semiconductor LM77" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for National Semiconductor LM77 | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm77. | |
| config SENSORS_LM78 | |
| tristate "National Semiconductor LM78 and compatibles" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for National Semiconductor LM78, | |
| LM78-J and LM79. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm78. | |
| config SENSORS_LM80 | |
| tristate "National Semiconductor LM80 and LM96080" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for National Semiconductor | |
| LM80 and LM96080 sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm80. | |
| config SENSORS_LM83 | |
| tristate "National Semiconductor LM83 and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for National Semiconductor | |
| LM82 and LM83 sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm83. | |
| config SENSORS_LM85 | |
| tristate "National Semiconductor LM85 and compatibles" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for National Semiconductor LM85 | |
| sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, | |
| EMC6D101, EMC6D102, and EMC6D103. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm85. | |
| config SENSORS_LM87 | |
| tristate "National Semiconductor LM87 and compatibles" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for National Semiconductor LM87 | |
| and Analog Devices ADM1024 sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm87. | |
| config SENSORS_LM90 | |
| tristate "National Semiconductor LM90 and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for National Semiconductor LM90, | |
| LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A, | |
| Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, | |
| MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008, | |
| Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, GMT G781, and | |
| Texas Instruments TMP451 sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm90. | |
| config SENSORS_LM92 | |
| tristate "National Semiconductor LM92 and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for National Semiconductor LM92 | |
| and Maxim MAX6635 sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm92. | |
| config SENSORS_LM93 | |
| tristate "National Semiconductor LM93 and compatibles" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for National Semiconductor LM93, | |
| LM94, and compatible sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm93. | |
| config SENSORS_LM95234 | |
| tristate "National Semiconductor LM95234 and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the LM95233 and LM95234 | |
| temperature sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm95234. | |
| config SENSORS_LM95241 | |
| tristate "National Semiconductor LM95241 and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for LM95231 and LM95241 sensor | |
| chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm95241. | |
| config SENSORS_LM95245 | |
| tristate "National Semiconductor LM95245 and compatibles" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for LM95235 and LM95245 | |
| temperature sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm95245. | |
| config SENSORS_PC87360 | |
| tristate "National Semiconductor PC87360 family" | |
| depends on !PPC | |
| select HWMON_VID | |
| help | |
| If you say yes here you get access to the hardware monitoring | |
| functions of the National Semiconductor PC8736x Super-I/O chips. | |
| The PC87360, PC87363 and PC87364 only have fan monitoring and | |
| control. The PC87365 and PC87366 additionally have voltage and | |
| temperature monitoring. | |
| This driver can also be built as a module. If so, the module | |
| will be called pc87360. | |
| config SENSORS_PC87427 | |
| tristate "National Semiconductor PC87427" | |
| depends on !PPC | |
| help | |
| If you say yes here you get access to the hardware monitoring | |
| functions of the National Semiconductor PC87427 Super-I/O chip. | |
| The chip has two distinct logical devices, one for fan speed | |
| monitoring and control, and one for voltage and temperature | |
| monitoring. Fan speed monitoring and control are supported, as | |
| well as temperature monitoring. Voltages aren't supported yet. | |
| This driver can also be built as a module. If so, the module | |
| will be called pc87427. | |
| config SENSORS_NTC_THERMISTOR | |
| tristate "NTC thermistor support from Murata" | |
| depends on !OF || IIO=n || IIO | |
| depends on THERMAL || !THERMAL_OF | |
| help | |
| This driver supports NTC thermistors sensor reading and its | |
| interpretation. The driver can also monitor the temperature and | |
| send notifications about the temperature. | |
| Currently, this driver supports | |
| NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333, | |
| NCP03WF104 and NCP15XH103 from Murata and B57330V2103 from EPCOS. | |
| This driver can also be built as a module. If so, the module | |
| will be called ntc-thermistor. | |
| config SENSORS_NCT6683 | |
| tristate "Nuvoton NCT6683D" | |
| depends on !PPC | |
| help | |
| If you say yes here you get support for the hardware monitoring | |
| functionality of the Nuvoton NCT6683D eSIO chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called nct6683. | |
| config SENSORS_NCT6775 | |
| tristate "Nuvoton NCT6775F and compatibles" | |
| depends on !PPC | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the hardware monitoring | |
| functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, | |
| NCT6791D, NCT6792D, NCT6793D, and compatible Super-I/O chips. This | |
| driver replaces the w83627ehf driver for NCT6775F and NCT6776F. | |
| This driver can also be built as a module. If so, the module | |
| will be called nct6775. | |
| config SENSORS_NCT7802 | |
| tristate "Nuvoton NCT7802Y" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for the Nuvoton NCT7802Y | |
| hardware monitoring chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called nct7802. | |
| config SENSORS_NCT7904 | |
| tristate "Nuvoton NCT7904" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Nuvoton NCT7904 | |
| hardware monitoring chip, including manual fan speed control. | |
| This driver can also be built as a module. If so, the module | |
| will be called nct7904. | |
| config SENSORS_NSA320 | |
| tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors" | |
| depends on GPIOLIB && OF | |
| depends on MACH_KIRKWOOD || COMPILE_TEST | |
| help | |
| If you say yes here you get support for hardware monitoring | |
| for the ZyXEL NSA320 Media Server and other compatible devices | |
| (probably the NSA325 and some NSA310 variants). | |
| The sensor data is taken from a Holtek HT46R065 microcontroller | |
| connected to GPIO lines. | |
| This driver can also be built as a module. If so, the module | |
| will be called nsa320-hwmon. | |
| config SENSORS_PCF8591 | |
| tristate "Philips PCF8591 ADC/DAC" | |
| depends on I2C | |
| default n | |
| help | |
| If you say yes here you get support for Philips PCF8591 4-channel | |
| ADC, 1-channel DAC chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called pcf8591. | |
| These devices are hard to detect and rarely found on mainstream | |
| hardware. If unsure, say N. | |
| source drivers/hwmon/pmbus/Kconfig | |
| config SENSORS_PWM_FAN | |
| tristate "PWM fan" | |
| depends on (PWM && OF) || COMPILE_TEST | |
| depends on THERMAL || THERMAL=n | |
| help | |
| If you say yes here you get support for fans connected to PWM lines. | |
| The driver uses the generic PWM interface, thus it will work on a | |
| variety of SoCs. | |
| This driver can also be built as a module. If so, the module | |
| will be called pwm-fan. | |
| config SENSORS_SHT15 | |
| tristate "Sensiron humidity and temperature sensors. SHT15 and compat." | |
| depends on GPIOLIB || COMPILE_TEST | |
| select BITREVERSE | |
| help | |
| If you say yes here you get support for the Sensiron SHT10, SHT11, | |
| SHT15, SHT71, SHT75 humidity and temperature sensors. | |
| This driver can also be built as a module. If so, the module | |
| will be called sht15. | |
| config SENSORS_SHT21 | |
| tristate "Sensiron humidity and temperature sensors. SHT21 and compat." | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Sensiron SHT21, SHT25 | |
| humidity and temperature sensors. | |
| This driver can also be built as a module. If so, the module | |
| will be called sht21. | |
| config SENSORS_SHT3x | |
| tristate "Sensiron humidity and temperature sensors. SHT3x and compat." | |
| depends on I2C | |
| select CRC8 | |
| help | |
| If you say yes here you get support for the Sensiron SHT30 and SHT31 | |
| humidity and temperature sensors. | |
| This driver can also be built as a module. If so, the module | |
| will be called sht3x. | |
| config SENSORS_SHTC1 | |
| tristate "Sensiron humidity and temperature sensors. SHTC1 and compat." | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Sensiron SHTC1 and SHTW1 | |
| humidity and temperature sensors. | |
| This driver can also be built as a module. If so, the module | |
| will be called shtc1. | |
| config SENSORS_S3C | |
| tristate "Samsung built-in ADC" | |
| depends on S3C_ADC | |
| help | |
| If you say yes here you get support for the on-board ADCs of | |
| the Samsung S3C24XX, S3C64XX and other series of SoC | |
| This driver can also be built as a module. If so, the module | |
| will be called s3c-hwmon. | |
| config SENSORS_S3C_RAW | |
| bool "Include raw channel attributes in sysfs" | |
| depends on SENSORS_S3C | |
| help | |
| Say Y here if you want to include raw copies of all the ADC | |
| channels in sysfs. | |
| config SENSORS_SIS5595 | |
| tristate "Silicon Integrated Systems Corp. SiS5595" | |
| depends on PCI | |
| help | |
| If you say yes here you get support for the integrated sensors in | |
| SiS5595 South Bridges. | |
| This driver can also be built as a module. If so, the module | |
| will be called sis5595. | |
| config SENSORS_DME1737 | |
| tristate "SMSC DME1737, SCH311x and compatibles" | |
| depends on I2C && !PPC | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the hardware monitoring | |
| and fan control features of the SMSC DME1737, SCH311x, SCH5027, and | |
| Asus A8000 Super-I/O chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called dme1737. | |
| config SENSORS_EMC1403 | |
| tristate "SMSC EMC1403/23 thermal sensor" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for the SMSC EMC1403/23 | |
| temperature monitoring chip. | |
| Threshold values can be configured using sysfs. | |
| Data from the different diodes are accessible via sysfs. | |
| config SENSORS_EMC2103 | |
| tristate "SMSC EMC2103" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the temperature | |
| and fan sensors of the SMSC EMC2103 chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called emc2103. | |
| config SENSORS_EMC6W201 | |
| tristate "SMSC EMC6W201" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the SMSC EMC6W201 | |
| hardware monitoring chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called emc6w201. | |
| config SENSORS_SMSC47M1 | |
| tristate "SMSC LPC47M10x and compatibles" | |
| depends on !PPC | |
| help | |
| If you say yes here you get support for the integrated fan | |
| monitoring and control capabilities of the SMSC LPC47B27x, | |
| LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, | |
| LPC47M192, LPC47M292 and LPC47M997 chips. | |
| The temperature and voltage sensor features of the LPC47M15x, | |
| LPC47M192, LPC47M292 and LPC47M997 are supported by another | |
| driver, select also "SMSC LPC47M192 and compatibles" below for | |
| those. | |
| This driver can also be built as a module. If so, the module | |
| will be called smsc47m1. | |
| config SENSORS_SMSC47M192 | |
| tristate "SMSC LPC47M192 and compatibles" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the temperature and | |
| voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 | |
| and LPC47M997 chips. | |
| The fan monitoring and control capabilities of these chips | |
| are supported by another driver, select | |
| "SMSC LPC47M10x and compatibles" above. You need both drivers | |
| if you want fan control and voltage/temperature sensor support. | |
| This driver can also be built as a module. If so, the module | |
| will be called smsc47m192. | |
| config SENSORS_SMSC47B397 | |
| tristate "SMSC LPC47B397-NC" | |
| depends on !PPC | |
| help | |
| If you say yes here you get support for the SMSC LPC47B397-NC | |
| sensor chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called smsc47b397. | |
| config SENSORS_SCH56XX_COMMON | |
| tristate | |
| default n | |
| config SENSORS_SCH5627 | |
| tristate "SMSC SCH5627" | |
| depends on !PPC && WATCHDOG | |
| select SENSORS_SCH56XX_COMMON | |
| select WATCHDOG_CORE | |
| help | |
| If you say yes here you get support for the hardware monitoring | |
| features of the SMSC SCH5627 Super-I/O chip including support for | |
| the integrated watchdog. | |
| This driver can also be built as a module. If so, the module | |
| will be called sch5627. | |
| config SENSORS_SCH5636 | |
| tristate "SMSC SCH5636" | |
| depends on !PPC && WATCHDOG | |
| select SENSORS_SCH56XX_COMMON | |
| select WATCHDOG_CORE | |
| help | |
| SMSC SCH5636 Super I/O chips include an embedded microcontroller for | |
| hardware monitoring solutions, allowing motherboard manufacturers to | |
| create their own custom hwmon solution based upon the SCH5636. | |
| Currently this driver only supports the Fujitsu Theseus SCH5636 based | |
| hwmon solution. Say yes here if you want support for the Fujitsu | |
| Theseus' hardware monitoring features including support for the | |
| integrated watchdog. | |
| This driver can also be built as a module. If so, the module | |
| will be called sch5636. | |
| config SENSORS_STTS751 | |
| tristate "ST Microelectronics STTS751" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for STTS751 | |
| temperature sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called stts751. | |
| config SENSORS_SMM665 | |
| tristate "Summit Microelectronics SMM665" | |
| depends on I2C | |
| default n | |
| help | |
| If you say yes here you get support for the hardware monitoring | |
| features of the Summit Microelectronics SMM665/SMM665B Six-Channel | |
| Active DC Output Controller / Monitor. | |
| Other supported chips are SMM465, SMM665C, SMM764, and SMM766. | |
| Support for those chips is untested. | |
| This driver can also be built as a module. If so, the module will | |
| be called smm665. | |
| config SENSORS_ADC128D818 | |
| tristate "Texas Instruments ADC128D818" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Texas Instruments | |
| ADC128D818 System Monitor with Temperature Sensor chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called adc128d818. | |
| config SENSORS_ADS1015 | |
| tristate "Texas Instruments ADS1015" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Texas Instruments | |
| ADS1015/ADS1115 12/16-bit 4-input ADC device. | |
| This driver can also be built as a module. If so, the module | |
| will be called ads1015. | |
| config SENSORS_ADS7828 | |
| tristate "Texas Instruments ADS7828 and compatibles" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for Texas Instruments ADS7828 and | |
| ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while | |
| it is 8-bit on ADS7830. | |
| This driver can also be built as a module. If so, the module | |
| will be called ads7828. | |
| config SENSORS_ADS7871 | |
| tristate "Texas Instruments ADS7871 A/D converter" | |
| depends on SPI | |
| help | |
| If you say yes here you get support for TI ADS7871 & ADS7870 | |
| This driver can also be built as a module. If so, the module | |
| will be called ads7871. | |
| config SENSORS_AMC6821 | |
| tristate "Texas Instruments AMC6821" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Texas Instruments | |
| AMC6821 hardware monitoring chips. | |
| This driver can also be build as a module. If so, the module | |
| will be called amc6821. | |
| config SENSORS_INA209 | |
| tristate "TI / Burr Brown INA209" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the TI / Burr Brown INA209 | |
| voltage / current / power monitor I2C interface. | |
| This driver can also be built as a module. If so, the module will | |
| be called ina209. | |
| config SENSORS_INA2XX | |
| tristate "Texas Instruments INA219 and compatibles" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for INA219, INA220, INA226, | |
| INA230, and INA231 power monitor chips. | |
| The INA2xx driver is configured for the default configuration of | |
| the part as described in the datasheet. | |
| Default value for Rshunt is 10 mOhms. | |
| This driver can also be built as a module. If so, the module | |
| will be called ina2xx. | |
| config SENSORS_INA3221 | |
| tristate "Texas Instruments INA3221 Triple Power Monitor" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for the TI INA3221 Triple Power | |
| Monitor. | |
| This driver can also be built as a module. If so, the module | |
| will be called ina3221. | |
| config SENSORS_TC74 | |
| tristate "Microchip TC74" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Microchip TC74 single | |
| input temperature sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called tc74. | |
| config SENSORS_THMC50 | |
| tristate "Texas Instruments THMC50 / Analog Devices ADM1022" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Texas Instruments THMC50 | |
| sensor chips and clones: the Analog Devices ADM1022. | |
| This driver can also be built as a module. If so, the module | |
| will be called thmc50. | |
| config SENSORS_TMP102 | |
| tristate "Texas Instruments TMP102" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for Texas Instruments TMP102 | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called tmp102. | |
| config SENSORS_TMP103 | |
| tristate "Texas Instruments TMP103" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for Texas Instruments TMP103 | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called tmp103. | |
| config SENSORS_TMP108 | |
| tristate "Texas Instruments TMP108" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for Texas Instruments TMP108 | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called tmp108. | |
| config SENSORS_TMP401 | |
| tristate "Texas Instruments TMP401 and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Texas Instruments TMP401, | |
| TMP411, TMP431, TMP432, TMP435, and TMP461 temperature sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called tmp401. | |
| config SENSORS_TMP421 | |
| tristate "Texas Instruments TMP421 and compatible" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Texas Instruments TMP421, | |
| TMP422, TMP423, TMP441, and TMP442 temperature sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called tmp421. | |
| config SENSORS_VEXPRESS | |
| tristate "Versatile Express" | |
| depends on VEXPRESS_CONFIG | |
| help | |
| This driver provides support for hardware sensors available on | |
| the ARM Ltd's Versatile Express platform. It can provide wide | |
| range of information like temperature, power, energy. | |
| config SENSORS_VIA_CPUTEMP | |
| tristate "VIA CPU temperature sensor" | |
| depends on X86 | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the temperature | |
| sensor inside your CPU. Supported are all known variants of | |
| the VIA C7 and Nano. | |
| config SENSORS_VIA686A | |
| tristate "VIA686A" | |
| depends on PCI | |
| help | |
| If you say yes here you get support for the integrated sensors in | |
| Via 686A/B South Bridges. | |
| This driver can also be built as a module. If so, the module | |
| will be called via686a. | |
| config SENSORS_VT1211 | |
| tristate "VIA VT1211" | |
| depends on !PPC | |
| select HWMON_VID | |
| help | |
| If you say yes here then you get support for hardware monitoring | |
| features of the VIA VT1211 Super-I/O chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called vt1211. | |
| config SENSORS_VT8231 | |
| tristate "VIA VT8231" | |
| depends on PCI | |
| select HWMON_VID | |
| help | |
| If you say yes here then you get support for the integrated sensors | |
| in the VIA VT8231 device. | |
| This driver can also be built as a module. If so, the module | |
| will be called vt8231. | |
| config SENSORS_W83781D | |
| tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the Winbond W8378x series | |
| of sensor chips: the W83781D, W83782D and W83783S, and the similar | |
| Asus AS99127F. | |
| This driver can also be built as a module. If so, the module | |
| will be called w83781d. | |
| config SENSORS_W83791D | |
| tristate "Winbond W83791D" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the Winbond W83791D chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called w83791d. | |
| config SENSORS_W83792D | |
| tristate "Winbond W83792D" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Winbond W83792D chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called w83792d. | |
| config SENSORS_W83793 | |
| tristate "Winbond W83793" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the Winbond W83793 | |
| hardware monitoring chip, including support for the integrated | |
| watchdog. | |
| This driver can also be built as a module. If so, the module | |
| will be called w83793. | |
| config SENSORS_W83795 | |
| tristate "Winbond/Nuvoton W83795G/ADG" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Winbond W83795G and | |
| W83795ADG hardware monitoring chip, including manual fan speed | |
| control. | |
| This driver can also be built as a module. If so, the module | |
| will be called w83795. | |
| config SENSORS_W83795_FANCTRL | |
| bool "Include automatic fan control support (DANGEROUS)" | |
| depends on SENSORS_W83795 | |
| default n | |
| help | |
| If you say yes here, support for automatic fan speed control | |
| will be included in the driver. | |
| This part of the code wasn't carefully reviewed and tested yet, | |
| so enabling this option is strongly discouraged on production | |
| servers. Only developers and testers should enable it for the | |
| time being. | |
| Please also note that this option will create sysfs attribute | |
| files which may change in the future, so you shouldn't rely | |
| on them being stable. | |
| config SENSORS_W83L785TS | |
| tristate "Winbond W83L785TS-S" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Winbond W83L785TS-S | |
| sensor chip, which is used on the Asus A7N8X, among other | |
| motherboards. | |
| This driver can also be built as a module. If so, the module | |
| will be called w83l785ts. | |
| config SENSORS_W83L786NG | |
| tristate "Winbond W83L786NG, W83L786NR" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Winbond W83L786NG | |
| and W83L786NR sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called w83l786ng. | |
| config SENSORS_W83627HF | |
| tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" | |
| depends on !PPC | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the Winbond W836X7 series | |
| of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and | |
| W83697HF. | |
| This driver can also be built as a module. If so, the module | |
| will be called w83627hf. | |
| config SENSORS_W83627EHF | |
| tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F" | |
| depends on !PPC | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the hardware | |
| monitoring functionality of the Winbond W83627EHF Super-I/O chip. | |
| This driver also supports the W83627EHG, which is the lead-free | |
| version of the W83627EHF, and the W83627DHG, which is a similar | |
| chip suited for specific Intel processors that use PECI such as | |
| the Core 2 Duo. And also the W83627UHG, which is a stripped down | |
| version of the W83627DHG (as far as hardware monitoring goes.) | |
| This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F | |
| (also known as W83667HG-I), and NCT6776F. | |
| This driver can also be built as a module. If so, the module | |
| will be called w83627ehf. | |
| config SENSORS_WM831X | |
| tristate "WM831x PMICs" | |
| depends on MFD_WM831X | |
| help | |
| If you say yes here you get support for the hardware | |
| monitoring functionality of the Wolfson Microelectronics | |
| WM831x series of PMICs. | |
| This driver can also be built as a module. If so, the module | |
| will be called wm831x-hwmon. | |
| config SENSORS_WM8350 | |
| tristate "Wolfson Microelectronics WM835x" | |
| depends on MFD_WM8350 | |
| help | |
| If you say yes here you get support for the hardware | |
| monitoring features of the WM835x series of PMICs. | |
| This driver can also be built as a module. If so, the module | |
| will be called wm8350-hwmon. | |
| config SENSORS_ULTRA45 | |
| tristate "Sun Ultra45 PIC16F747" | |
| depends on SPARC64 | |
| help | |
| This driver provides support for the Ultra45 workstation environmental | |
| sensors. | |
| config SENSORS_XGENE | |
| tristate "APM X-Gene SoC hardware monitoring driver" | |
| depends on XGENE_SLIMPRO_MBOX || PCC | |
| help | |
| If you say yes here you get support for the temperature | |
| and power sensors for APM X-Gene SoC. | |
| if ACPI | |
| comment "ACPI drivers" | |
| config SENSORS_ACPI_POWER | |
| tristate "ACPI 4.0 power meter" | |
| help | |
| This driver exposes ACPI 4.0 power meters as hardware monitoring | |
| devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware | |
| and a power meter. | |
| To compile this driver as a module, choose M here: | |
| the module will be called acpi_power_meter. | |
| config SENSORS_ATK0110 | |
| tristate "ASUS ATK0110" | |
| depends on X86 | |
| help | |
| If you say yes here you get support for the ACPI hardware | |
| monitoring interface found in many ASUS motherboards. This | |
| driver will provide readings of fans, voltages and temperatures | |
| through the system firmware. | |
| This driver can also be built as a module. If so, the module | |
| will be called asus_atk0110. | |
| endif # ACPI | |
| endif # HWMON |