| # SPDX-License-Identifier: GPL-2.0-only | |
| # | |
| # humidity sensor drivers | |
| # | |
| menu "Humidity sensors" | |
| config AM2315 | |
| tristate "Aosong AM2315 relative humidity and temperature sensor" | |
| depends on I2C | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| If you say yes here you get support for the Aosong AM2315 | |
| relative humidity and ambient temperature sensor. | |
| This driver can also be built as a module. If so, the module will | |
| be called am2315. | |
| config DHT11 | |
| tristate "DHT11 (and compatible sensors) driver" | |
| depends on GPIOLIB || COMPILE_TEST | |
| help | |
| This driver supports reading data via a single interrupt | |
| generating GPIO line. Currently tested are DHT11 and DHT22. | |
| Other sensors should work as well as long as they speak the | |
| same protocol. | |
| config ENS210 | |
| tristate "ENS210 temperature and humidity sensor" | |
| depends on I2C | |
| select CRC7 | |
| help | |
| Say yes here to get support for the ScioSense ENS210 family of | |
| humidity and temperature sensors. | |
| This driver can also be built as a module. If so, the module will be | |
| called ens210. | |
| config HDC100X | |
| tristate "TI HDC100x relative humidity and temperature sensor" | |
| depends on I2C | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for the Texas Instruments | |
| HDC1000, HDC1008, HDC1010, HDC1050, and HDC1080 relative | |
| humidity and temperature sensors. | |
| To compile this driver as a module, choose M here: the module | |
| will be called hdc100x. | |
| config HDC2010 | |
| tristate "TI HDC2010 relative humidity and temperature sensor" | |
| depends on I2C | |
| help | |
| Say yes here to build support for the Texas Instruments | |
| HDC2010 and HDC2080 relative humidity and temperature sensors. | |
| To compile this driver as a module, choose M here: the module | |
| will be called hdc2010. | |
| config HDC3020 | |
| tristate "TI HDC3020 relative humidity and temperature sensor" | |
| depends on I2C | |
| select CRC8 | |
| help | |
| Say yes here to build support for the Texas Instruments | |
| HDC3020, HDC3021 and HDC3022 relative humidity and temperature | |
| sensors. | |
| To compile this driver as a module, choose M here: the module | |
| will be called hdc3020. | |
| config HID_SENSOR_HUMIDITY | |
| tristate "HID Environmental humidity sensor" | |
| depends on HID_SENSOR_HUB | |
| select IIO_BUFFER | |
| select HID_SENSOR_IIO_COMMON | |
| select HID_SENSOR_IIO_TRIGGER | |
| help | |
| Say yes here to build support for the HID SENSOR | |
| humidity driver | |
| To compile this driver as a module, choose M here: the module | |
| will be called hid-sensor-humidity. | |
| config HTS221 | |
| tristate "STMicroelectronics HTS221 sensor Driver" | |
| depends on (I2C || SPI) | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| select HTS221_I2C if (I2C) | |
| select HTS221_SPI if (SPI_MASTER) | |
| help | |
| Say yes here to build support for STMicroelectronics HTS221 | |
| temperature-humidity sensor | |
| To compile this driver as a module, choose M here: the module | |
| will be called hts221. | |
| config HTS221_I2C | |
| tristate | |
| depends on HTS221 | |
| select REGMAP_I2C | |
| config HTS221_SPI | |
| tristate | |
| depends on HTS221 | |
| select REGMAP_SPI | |
| config HTU21 | |
| tristate "Measurement Specialties HTU21 humidity & temperature sensor" | |
| depends on I2C | |
| select IIO_MS_SENSORS_I2C | |
| help | |
| If you say yes here you get support for the Measurement Specialties | |
| HTU21 humidity and temperature sensor. | |
| This driver is also used for MS8607 temperature, pressure & humidity | |
| sensor | |
| This driver can also be built as a module. If so, the module will | |
| be called htu21. | |
| config SI7005 | |
| tristate "SI7005 relative humidity and temperature sensor" | |
| depends on I2C | |
| help | |
| Say yes here to build support for the Silabs Si7005 relative | |
| humidity and temperature sensor. | |
| To compile this driver as a module, choose M here: the module | |
| will be called si7005. This driver also | |
| supports Hoperf TH02 Humidity and Temperature Sensor. | |
| config SI7020 | |
| tristate "Si7013/20/21 Relative Humidity and Temperature Sensors" | |
| depends on I2C | |
| help | |
| Say yes here to build support for the Silicon Labs Si7013/20/21 | |
| Relative Humidity and Temperature Sensors. This driver also | |
| supports Hoperf TH06 Humidity and Temperature Sensor. | |
| To compile this driver as a module, choose M here: the module | |
| will be called si7020. | |
| endmenu |