| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * ADIS16475 IMU driver | |
| * | |
| * Copyright 2019 Analog Devices Inc. | |
| */ | |
| #include <linux/bitfield.h> | |
| #include <linux/bitops.h> | |
| #include <linux/clk.h> | |
| #include <linux/debugfs.h> | |
| #include <linux/delay.h> | |
| #include <linux/device.h> | |
| #include <linux/kernel.h> | |
| #include <linux/iio/buffer.h> | |
| #include <linux/iio/iio.h> | |
| #include <linux/iio/imu/adis.h> | |
| #include <linux/iio/sysfs.h> | |
| #include <linux/iio/trigger_consumer.h> | |
| #include <linux/irq.h> | |
| #include <linux/lcm.h> | |
| #include <linux/math.h> | |
| #include <linux/module.h> | |
| #include <linux/mod_devicetable.h> | |
| #include <linux/property.h> | |
| #include <linux/spi/spi.h> | |
| #define ADIS16475_REG_DIAG_STAT 0x02 | |
| #define ADIS16475_REG_X_GYRO_L 0x04 | |
| #define ADIS16475_REG_Y_GYRO_L 0x08 | |
| #define ADIS16475_REG_Z_GYRO_L 0x0C | |
| #define ADIS16475_REG_X_ACCEL_L 0x10 | |
| #define ADIS16475_REG_Y_ACCEL_L 0x14 | |
| #define ADIS16475_REG_Z_ACCEL_L 0x18 | |
| #define ADIS16475_REG_TEMP_OUT 0x1c | |
| #define ADIS16475_REG_X_DELTANG_L 0x24 | |
| #define ADIS16475_REG_Y_DELTANG_L 0x28 | |
| #define ADIS16475_REG_Z_DELTANG_L 0x2C | |
| #define ADIS16475_REG_X_DELTVEL_L 0x30 | |
| #define ADIS16475_REG_Y_DELTVEL_L 0x34 | |
| #define ADIS16475_REG_Z_DELTVEL_L 0x38 | |
| #define ADIS16475_REG_X_GYRO_BIAS_L 0x40 | |
| #define ADIS16475_REG_Y_GYRO_BIAS_L 0x44 | |
| #define ADIS16475_REG_Z_GYRO_BIAS_L 0x48 | |
| #define ADIS16475_REG_X_ACCEL_BIAS_L 0x4c | |
| #define ADIS16475_REG_Y_ACCEL_BIAS_L 0x50 | |
| #define ADIS16475_REG_Z_ACCEL_BIAS_L 0x54 | |
| #define ADIS16475_REG_FILT_CTRL 0x5c | |
| #define ADIS16475_FILT_CTRL_MASK GENMASK(2, 0) | |
| #define ADIS16475_FILT_CTRL(x) FIELD_PREP(ADIS16475_FILT_CTRL_MASK, x) | |
| #define ADIS16475_REG_MSG_CTRL 0x60 | |
| #define ADIS16475_MSG_CTRL_DR_POL_MASK BIT(0) | |
| #define ADIS16475_MSG_CTRL_DR_POL(x) \ | |
| FIELD_PREP(ADIS16475_MSG_CTRL_DR_POL_MASK, x) | |
| #define ADIS16475_SYNC_MODE_MASK GENMASK(4, 2) | |
| #define ADIS16475_SYNC_MODE(x) FIELD_PREP(ADIS16475_SYNC_MODE_MASK, x) | |
| #define ADIS16575_SYNC_4KHZ_MASK BIT(11) | |
| #define ADIS16575_SYNC_4KHZ(x) FIELD_PREP(ADIS16575_SYNC_4KHZ_MASK, x) | |
| #define ADIS16475_REG_UP_SCALE 0x62 | |
| #define ADIS16475_REG_DEC_RATE 0x64 | |
| #define ADIS16475_REG_GLOB_CMD 0x68 | |
| #define ADIS16475_REG_FIRM_REV 0x6c | |
| #define ADIS16475_REG_FIRM_DM 0x6e | |
| #define ADIS16475_REG_FIRM_Y 0x70 | |
| #define ADIS16475_REG_PROD_ID 0x72 | |
| #define ADIS16475_REG_SERIAL_NUM 0x74 | |
| #define ADIS16475_REG_FLASH_CNT 0x7c | |
| #define ADIS16500_BURST_DATA_SEL_MASK BIT(8) | |
| #define ADIS16500_BURST32_MASK BIT(9) | |
| #define ADIS16500_BURST32(x) FIELD_PREP(ADIS16500_BURST32_MASK, x) | |
| /* number of data elements in burst mode */ | |
| #define ADIS16475_BURST32_MAX_DATA_NO_TS32 32 | |
| #define ADIS16575_BURST32_DATA_TS32 34 | |
| #define ADIS16475_BURST_MAX_DATA 20 | |
| #define ADIS16475_MAX_SCAN_DATA 20 | |
| /* spi max speed in brust mode */ | |
| #define ADIS16475_BURST_MAX_SPEED 1000000 | |
| #define ADIS16575_BURST_MAX_SPEED 8000000 | |
| #define ADIS16475_LSB_DEC_MASK 0 | |
| #define ADIS16475_LSB_FIR_MASK 1 | |
| #define ADIS16500_BURST_DATA_SEL_0_CHN_MASK GENMASK(5, 0) | |
| #define ADIS16500_BURST_DATA_SEL_1_CHN_MASK GENMASK(12, 7) | |
| #define ADIS16575_MAX_FIFO_WM 511UL | |
| #define ADIS16475_REG_FIFO_CTRL 0x5A | |
| #define ADIS16575_WM_LVL_MASK GENMASK(15, 4) | |
| #define ADIS16575_WM_LVL(x) FIELD_PREP(ADIS16575_WM_LVL_MASK, x) | |
| #define ADIS16575_WM_POL_MASK BIT(3) | |
| #define ADIS16575_WM_POL(x) FIELD_PREP(ADIS16575_WM_POL_MASK, x) | |
| #define ADIS16575_WM_EN_MASK BIT(2) | |
| #define ADIS16575_WM_EN(x) FIELD_PREP(ADIS16575_WM_EN_MASK, x) | |
| #define ADIS16575_OVERFLOW_MASK BIT(1) | |
| #define ADIS16575_STOP_ENQUEUE FIELD_PREP(ADIS16575_OVERFLOW_MASK, 0) | |
| #define ADIS16575_OVERWRITE_OLDEST FIELD_PREP(ADIS16575_OVERFLOW_MASK, 1) | |
| #define ADIS16575_FIFO_EN_MASK BIT(0) | |
| #define ADIS16575_FIFO_EN(x) FIELD_PREP(ADIS16575_FIFO_EN_MASK, x) | |
| #define ADIS16575_FIFO_FLUSH_CMD BIT(5) | |
| #define ADIS16575_REG_FIFO_CNT 0x3C | |
| enum { | |
| ADIS16475_SYNC_DIRECT = 1, | |
| ADIS16475_SYNC_SCALED, | |
| ADIS16475_SYNC_OUTPUT, | |
| ADIS16475_SYNC_PULSE = 5, | |
| }; | |
| struct adis16475_sync { | |
| u16 sync_mode; | |
| u16 min_rate; | |
| u16 max_rate; | |
| }; | |
| struct adis16475_chip_info { | |
| const struct iio_chan_spec *channels; | |
| const struct adis16475_sync *sync; | |
| const struct adis_data adis_data; | |
| const char *name; | |
| #define ADIS16475_HAS_BURST32 BIT(0) | |
| #define ADIS16475_HAS_BURST_DELTA_DATA BIT(1) | |
| #define ADIS16475_HAS_TIMESTAMP32 BIT(2) | |
| #define ADIS16475_NEEDS_BURST_REQUEST BIT(3) | |
| const long flags; | |
| u32 num_channels; | |
| u32 gyro_max_val; | |
| u32 gyro_max_scale; | |
| u32 accel_max_val; | |
| u32 accel_max_scale; | |
| u32 temp_scale; | |
| u32 deltang_max_val; | |
| u32 deltvel_max_val; | |
| u32 int_clk; | |
| u16 max_dec; | |
| u8 num_sync; | |
| }; | |
| struct adis16475 { | |
| const struct adis16475_chip_info *info; | |
| struct adis adis; | |
| u32 clk_freq; | |
| bool burst32; | |
| unsigned long lsb_flag; | |
| u16 sync_mode; | |
| u16 fifo_watermark; | |
| /* Alignment needed for the timestamp */ | |
| __be16 data[ADIS16475_MAX_SCAN_DATA] __aligned(8); | |
| }; | |
| enum { | |
| ADIS16475_SCAN_GYRO_X, | |
| ADIS16475_SCAN_GYRO_Y, | |
| ADIS16475_SCAN_GYRO_Z, | |
| ADIS16475_SCAN_ACCEL_X, | |
| ADIS16475_SCAN_ACCEL_Y, | |
| ADIS16475_SCAN_ACCEL_Z, | |
| ADIS16475_SCAN_TEMP, | |
| ADIS16475_SCAN_DELTANG_X, | |
| ADIS16475_SCAN_DELTANG_Y, | |
| ADIS16475_SCAN_DELTANG_Z, | |
| ADIS16475_SCAN_DELTVEL_X, | |
| ADIS16475_SCAN_DELTVEL_Y, | |
| ADIS16475_SCAN_DELTVEL_Z, | |
| }; | |
| static bool low_rate_allow; | |
| module_param(low_rate_allow, bool, 0444); | |
| MODULE_PARM_DESC(low_rate_allow, | |
| "Allow IMU rates below the minimum advisable when external clk is used in SCALED mode (default: N)"); | |
| static ssize_t adis16475_show_firmware_revision(struct file *file, | |
| char __user *userbuf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct adis16475 *st = file->private_data; | |
| char buf[7]; | |
| size_t len; | |
| u16 rev; | |
| int ret; | |
| ret = adis_read_reg_16(&st->adis, ADIS16475_REG_FIRM_REV, &rev); | |
| if (ret) | |
| return ret; | |
| len = scnprintf(buf, sizeof(buf), "%x.%x\n", rev >> 8, rev & 0xff); | |
| return simple_read_from_buffer(userbuf, count, ppos, buf, len); | |
| } | |
| static const struct file_operations adis16475_firmware_revision_fops = { | |
| .open = simple_open, | |
| .read = adis16475_show_firmware_revision, | |
| .llseek = default_llseek, | |
| .owner = THIS_MODULE, | |
| }; | |
| static ssize_t adis16475_show_firmware_date(struct file *file, | |
| char __user *userbuf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct adis16475 *st = file->private_data; | |
| u16 md, year; | |
| char buf[12]; | |
| size_t len; | |
| int ret; | |
| ret = adis_read_reg_16(&st->adis, ADIS16475_REG_FIRM_Y, &year); | |
| if (ret) | |
| return ret; | |
| ret = adis_read_reg_16(&st->adis, ADIS16475_REG_FIRM_DM, &md); | |
| if (ret) | |
| return ret; | |
| len = snprintf(buf, sizeof(buf), "%.2x-%.2x-%.4x\n", md >> 8, md & 0xff, | |
| year); | |
| return simple_read_from_buffer(userbuf, count, ppos, buf, len); | |
| } | |
| static const struct file_operations adis16475_firmware_date_fops = { | |
| .open = simple_open, | |
| .read = adis16475_show_firmware_date, | |
| .llseek = default_llseek, | |
| .owner = THIS_MODULE, | |
| }; | |
| static int adis16475_show_serial_number(void *arg, u64 *val) | |
| { | |
| struct adis16475 *st = arg; | |
| u16 serial; | |
| int ret; | |
| ret = adis_read_reg_16(&st->adis, ADIS16475_REG_SERIAL_NUM, &serial); | |
| if (ret) | |
| return ret; | |
| *val = serial; | |
| return 0; | |
| } | |
| DEFINE_DEBUGFS_ATTRIBUTE(adis16475_serial_number_fops, | |
| adis16475_show_serial_number, NULL, "0x%.4llx\n"); | |
| static int adis16475_show_product_id(void *arg, u64 *val) | |
| { | |
| struct adis16475 *st = arg; | |
| u16 prod_id; | |
| int ret; | |
| ret = adis_read_reg_16(&st->adis, ADIS16475_REG_PROD_ID, &prod_id); | |
| if (ret) | |
| return ret; | |
| *val = prod_id; | |
| return 0; | |
| } | |
| DEFINE_DEBUGFS_ATTRIBUTE(adis16475_product_id_fops, | |
| adis16475_show_product_id, NULL, "%llu\n"); | |
| static int adis16475_show_flash_count(void *arg, u64 *val) | |
| { | |
| struct adis16475 *st = arg; | |
| u32 flash_count; | |
| int ret; | |
| ret = adis_read_reg_32(&st->adis, ADIS16475_REG_FLASH_CNT, | |
| &flash_count); | |
| if (ret) | |
| return ret; | |
| *val = flash_count; | |
| return 0; | |
| } | |
| DEFINE_DEBUGFS_ATTRIBUTE(adis16475_flash_count_fops, | |
| adis16475_show_flash_count, NULL, "%lld\n"); | |
| static void adis16475_debugfs_init(struct iio_dev *indio_dev) | |
| { | |
| struct adis16475 *st = iio_priv(indio_dev); | |
| struct dentry *d = iio_get_debugfs_dentry(indio_dev); | |
| if (!IS_ENABLED(CONFIG_DEBUG_FS)) | |
| return; | |
| debugfs_create_file_unsafe("serial_number", 0400, | |
| d, st, &adis16475_serial_number_fops); | |
| debugfs_create_file_unsafe("product_id", 0400, | |
| d, st, &adis16475_product_id_fops); | |
| debugfs_create_file_unsafe("flash_count", 0400, | |
| d, st, &adis16475_flash_count_fops); | |
| debugfs_create_file("firmware_revision", 0400, | |
| d, st, &adis16475_firmware_revision_fops); | |
| debugfs_create_file("firmware_date", 0400, d, | |
| st, &adis16475_firmware_date_fops); | |
| } | |
| static int adis16475_get_freq(struct adis16475 *st, u32 *freq) | |
| { | |
| int ret; | |
| u16 dec; | |
| u32 sample_rate = st->clk_freq; | |
| adis_dev_auto_lock(&st->adis); | |
| if (st->sync_mode == ADIS16475_SYNC_SCALED) { | |
| u16 sync_scale; | |
| ret = __adis_read_reg_16(&st->adis, ADIS16475_REG_UP_SCALE, &sync_scale); | |
| if (ret) | |
| return ret; | |
| sample_rate = st->clk_freq * sync_scale; | |
| } | |
| ret = __adis_read_reg_16(&st->adis, ADIS16475_REG_DEC_RATE, &dec); | |
| if (ret) | |
| return ret; | |
| *freq = DIV_ROUND_CLOSEST(sample_rate, dec + 1); | |
| return 0; | |
| } | |
| static int adis16475_set_freq(struct adis16475 *st, const u32 freq) | |
| { | |
| u16 dec; | |
| int ret; | |
| u32 sample_rate = st->clk_freq; | |
| /* The optimal sample rate for the supported IMUs is between int_clk - 100 and int_clk + 100. */ | |
| u32 max_sample_rate = st->info->int_clk * 1000 + 100000; | |
| u32 min_sample_rate = st->info->int_clk * 1000 - 100000; | |
| if (!freq) | |
| return -EINVAL; | |
| adis_dev_auto_lock(&st->adis); | |
| /* | |
| * When using sync scaled mode, the input clock needs to be scaled so that we have | |
| * an IMU sample rate between (optimally) int_clk - 100 and int_clk + 100. | |
| * After this, we can use the decimation filter to lower the sampling rate in order | |
| * to get what the user wants. | |
| * Optimally, the user sample rate is a multiple of both the IMU sample rate and | |
| * the input clock. Hence, calculating the sync_scale dynamically gives us better | |
| * chances of achieving a perfect/integer value for DEC_RATE. The math here is: | |
| * 1. lcm of the input clock and the desired output rate. | |
| * 2. get the highest multiple of the previous result lower than the adis max rate. | |
| * 3. The last result becomes the IMU sample rate. Use that to calculate SYNC_SCALE | |
| * and DEC_RATE (to get the user output rate) | |
| */ | |
| if (st->sync_mode == ADIS16475_SYNC_SCALED) { | |
| unsigned long scaled_rate = lcm(st->clk_freq, freq); | |
| int sync_scale; | |
| /* | |
| * If lcm is bigger than the IMU maximum sampling rate there's no perfect | |
| * solution. In this case, we get the highest multiple of the input clock | |
| * lower than the IMU max sample rate. | |
| */ | |
| if (scaled_rate > max_sample_rate) | |
| scaled_rate = max_sample_rate / st->clk_freq * st->clk_freq; | |
| else | |
| scaled_rate = max_sample_rate / scaled_rate * scaled_rate; | |
| /* | |
| * This is not an hard requirement but it's not advised to run the IMU | |
| * with a sample rate lower than internal clock frequency, due to possible | |
| * undersampling issues. However, there are users that might really want | |
| * to take the risk. Hence, we provide a module parameter for them. If set, | |
| * we allow sample rates lower than internal clock frequency. | |
| * By default, we won't allow this and we just roundup the rate to the next | |
| * multiple of the input clock. This is done like this as in some cases | |
| * (when DEC_RATE is 0) might give us the closest value to the one desired | |
| * by the user... | |
| */ | |
| if (scaled_rate < min_sample_rate && !low_rate_allow) | |
| scaled_rate = roundup(min_sample_rate, st->clk_freq); | |
| sync_scale = scaled_rate / st->clk_freq; | |
| ret = __adis_write_reg_16(&st->adis, ADIS16475_REG_UP_SCALE, sync_scale); | |
| if (ret) | |
| return ret; | |
| sample_rate = scaled_rate; | |
| } | |
| dec = DIV_ROUND_CLOSEST(sample_rate, freq); | |
| if (dec) | |
| dec--; | |
| if (dec > st->info->max_dec) | |
| dec = st->info->max_dec; | |
| ret = __adis_write_reg_16(&st->adis, ADIS16475_REG_DEC_RATE, dec); | |
| if (ret) | |
| return ret; | |
| /* | |
| * If decimation is used, then gyro and accel data will have meaningful | |
| * bits on the LSB registers. This info is used on the trigger handler. | |
| */ | |
| assign_bit(ADIS16475_LSB_DEC_MASK, &st->lsb_flag, dec); | |
| return 0; | |
| } | |
| /* The values are approximated. */ | |
| static const u32 adis16475_3db_freqs[] = { | |
| [0] = 720, /* Filter disabled, full BW (~720Hz) */ | |
| [1] = 360, | |
| [2] = 164, | |
| [3] = 80, | |
| [4] = 40, | |
| [5] = 20, | |
| [6] = 10, | |
| }; | |
| static int adis16475_get_filter(struct adis16475 *st, u32 *filter) | |
| { | |
| u16 filter_sz; | |
| int ret; | |
| const int mask = ADIS16475_FILT_CTRL_MASK; | |
| ret = adis_read_reg_16(&st->adis, ADIS16475_REG_FILT_CTRL, &filter_sz); | |
| if (ret) | |
| return ret; | |
| *filter = adis16475_3db_freqs[filter_sz & mask]; | |
| return 0; | |
| } | |
| static int adis16475_set_filter(struct adis16475 *st, const u32 filter) | |
| { | |
| int i = ARRAY_SIZE(adis16475_3db_freqs); | |
| int ret; | |
| while (--i) { | |
| if (adis16475_3db_freqs[i] >= filter) | |
| break; | |
| } | |
| ret = adis_write_reg_16(&st->adis, ADIS16475_REG_FILT_CTRL, | |
| ADIS16475_FILT_CTRL(i)); | |
| if (ret) | |
| return ret; | |
| /* | |
| * If FIR is used, then gyro and accel data will have meaningful | |
| * bits on the LSB registers. This info is used on the trigger handler. | |
| */ | |
| assign_bit(ADIS16475_LSB_FIR_MASK, &st->lsb_flag, i); | |
| return 0; | |
| } | |
| static ssize_t adis16475_get_fifo_enabled(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct iio_dev *indio_dev = dev_to_iio_dev(dev); | |
| struct adis16475 *st = iio_priv(indio_dev); | |
| int ret; | |
| u16 val; | |
| ret = adis_read_reg_16(&st->adis, ADIS16475_REG_FIFO_CTRL, &val); | |
| if (ret) | |
| return ret; | |
| return sysfs_emit(buf, "%lu\n", FIELD_GET(ADIS16575_FIFO_EN_MASK, val)); | |
| } | |
| static ssize_t adis16475_get_fifo_watermark(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct iio_dev *indio_dev = dev_to_iio_dev(dev); | |
| struct adis16475 *st = iio_priv(indio_dev); | |
| int ret; | |
| u16 val; | |
| ret = adis_read_reg_16(&st->adis, ADIS16475_REG_FIFO_CTRL, &val); | |
| if (ret) | |
| return ret; | |
| return sysfs_emit(buf, "%lu\n", FIELD_GET(ADIS16575_WM_LVL_MASK, val) + 1); | |
| } | |
| static ssize_t hwfifo_watermark_min_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return sysfs_emit(buf, "1\n"); | |
| } | |
| static ssize_t hwfifo_watermark_max_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return sysfs_emit(buf, "%lu\n", ADIS16575_MAX_FIFO_WM); | |
| } | |
| static IIO_DEVICE_ATTR_RO(hwfifo_watermark_min, 0); | |
| static IIO_DEVICE_ATTR_RO(hwfifo_watermark_max, 0); | |
| static IIO_DEVICE_ATTR(hwfifo_watermark, 0444, | |
| adis16475_get_fifo_watermark, NULL, 0); | |
| static IIO_DEVICE_ATTR(hwfifo_enabled, 0444, | |
| adis16475_get_fifo_enabled, NULL, 0); | |
| static const struct iio_dev_attr *adis16475_fifo_attributes[] = { | |
| &iio_dev_attr_hwfifo_watermark_min, | |
| &iio_dev_attr_hwfifo_watermark_max, | |
| &iio_dev_attr_hwfifo_watermark, | |
| &iio_dev_attr_hwfifo_enabled, | |
| NULL | |
| }; | |
| static int adis16475_buffer_postenable(struct iio_dev *indio_dev) | |
| { | |
| struct adis16475 *st = iio_priv(indio_dev); | |
| struct adis *adis = &st->adis; | |
| return adis_update_bits(adis, ADIS16475_REG_FIFO_CTRL, | |
| ADIS16575_FIFO_EN_MASK, (u16)ADIS16575_FIFO_EN(1)); | |
| } | |
| static int adis16475_buffer_postdisable(struct iio_dev *indio_dev) | |
| { | |
| struct adis16475 *st = iio_priv(indio_dev); | |
| struct adis *adis = &st->adis; | |
| int ret; | |
| adis_dev_auto_lock(&st->adis); | |
| ret = __adis_update_bits(adis, ADIS16475_REG_FIFO_CTRL, | |
| ADIS16575_FIFO_EN_MASK, (u16)ADIS16575_FIFO_EN(0)); | |
| if (ret) | |
| return ret; | |
| return __adis_write_reg_16(adis, ADIS16475_REG_GLOB_CMD, | |
| ADIS16575_FIFO_FLUSH_CMD); | |
| } | |
| static const struct iio_buffer_setup_ops adis16475_buffer_ops = { | |
| .postenable = adis16475_buffer_postenable, | |
| .postdisable = adis16475_buffer_postdisable, | |
| }; | |
| static int adis16475_set_watermark(struct iio_dev *indio_dev, unsigned int val) | |
| { | |
| struct adis16475 *st = iio_priv(indio_dev); | |
| int ret; | |
| u16 wm_lvl; | |
| adis_dev_auto_lock(&st->adis); | |
| val = min_t(unsigned int, val, ADIS16575_MAX_FIFO_WM); | |
| wm_lvl = ADIS16575_WM_LVL(val - 1); | |
| ret = __adis_update_bits(&st->adis, ADIS16475_REG_FIFO_CTRL, ADIS16575_WM_LVL_MASK, wm_lvl); | |
| if (ret) | |
| return ret; | |
| st->fifo_watermark = val; | |
| return 0; | |
| } | |
| static const u32 adis16475_calib_regs[] = { | |
| [ADIS16475_SCAN_GYRO_X] = ADIS16475_REG_X_GYRO_BIAS_L, | |
| [ADIS16475_SCAN_GYRO_Y] = ADIS16475_REG_Y_GYRO_BIAS_L, | |
| [ADIS16475_SCAN_GYRO_Z] = ADIS16475_REG_Z_GYRO_BIAS_L, | |
| [ADIS16475_SCAN_ACCEL_X] = ADIS16475_REG_X_ACCEL_BIAS_L, | |
| [ADIS16475_SCAN_ACCEL_Y] = ADIS16475_REG_Y_ACCEL_BIAS_L, | |
| [ADIS16475_SCAN_ACCEL_Z] = ADIS16475_REG_Z_ACCEL_BIAS_L, | |
| }; | |
| static int adis16475_read_raw(struct iio_dev *indio_dev, | |
| const struct iio_chan_spec *chan, | |
| int *val, int *val2, long info) | |
| { | |
| struct adis16475 *st = iio_priv(indio_dev); | |
| int ret; | |
| u32 tmp; | |
| switch (info) { | |
| case IIO_CHAN_INFO_RAW: | |
| return adis_single_conversion(indio_dev, chan, 0, val); | |
| case IIO_CHAN_INFO_SCALE: | |
| switch (chan->type) { | |
| case IIO_ANGL_VEL: | |
| *val = st->info->gyro_max_val; | |
| *val2 = st->info->gyro_max_scale; | |
| return IIO_VAL_FRACTIONAL; | |
| case IIO_ACCEL: | |
| *val = st->info->accel_max_val; | |
| *val2 = st->info->accel_max_scale; | |
| return IIO_VAL_FRACTIONAL; | |
| case IIO_TEMP: | |
| *val = st->info->temp_scale; | |
| return IIO_VAL_INT; | |
| case IIO_DELTA_ANGL: | |
| *val = st->info->deltang_max_val; | |
| *val2 = 31; | |
| return IIO_VAL_FRACTIONAL_LOG2; | |
| case IIO_DELTA_VELOCITY: | |
| *val = st->info->deltvel_max_val; | |
| *val2 = 31; | |
| return IIO_VAL_FRACTIONAL_LOG2; | |
| default: | |
| return -EINVAL; | |
| } | |
| case IIO_CHAN_INFO_CALIBBIAS: | |
| ret = adis_read_reg_32(&st->adis, | |
| adis16475_calib_regs[chan->scan_index], | |
| val); | |
| if (ret) | |
| return ret; | |
| return IIO_VAL_INT; | |
| case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: | |
| ret = adis16475_get_filter(st, val); | |
| if (ret) | |
| return ret; | |
| return IIO_VAL_INT; | |
| case IIO_CHAN_INFO_SAMP_FREQ: | |
| ret = adis16475_get_freq(st, &tmp); | |
| if (ret) | |
| return ret; | |
| *val = tmp / 1000; | |
| *val2 = (tmp % 1000) * 1000; | |
| return IIO_VAL_INT_PLUS_MICRO; | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static int adis16475_write_raw(struct iio_dev *indio_dev, | |
| const struct iio_chan_spec *chan, | |
| int val, int val2, long info) | |
| { | |
| struct adis16475 *st = iio_priv(indio_dev); | |
| u32 tmp; | |
| switch (info) { | |
| case IIO_CHAN_INFO_SAMP_FREQ: | |
| tmp = val * 1000 + val2 / 1000; | |
| return adis16475_set_freq(st, tmp); | |
| case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: | |
| return adis16475_set_filter(st, val); | |
| case IIO_CHAN_INFO_CALIBBIAS: | |
| return adis_write_reg_32(&st->adis, | |
| adis16475_calib_regs[chan->scan_index], | |
| val); | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| #define ADIS16475_MOD_CHAN(_type, _mod, _address, _si, _r_bits, _s_bits) \ | |
| { \ | |
| .type = (_type), \ | |
| .modified = 1, \ | |
| .channel2 = (_mod), \ | |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ | |
| BIT(IIO_CHAN_INFO_CALIBBIAS), \ | |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ | |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ | |
| BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \ | |
| .address = (_address), \ | |
| .scan_index = (_si), \ | |
| .scan_type = { \ | |
| .sign = 's', \ | |
| .realbits = (_r_bits), \ | |
| .storagebits = (_s_bits), \ | |
| .endianness = IIO_BE, \ | |
| }, \ | |
| } | |
| #define ADIS16475_GYRO_CHANNEL(_mod) \ | |
| ADIS16475_MOD_CHAN(IIO_ANGL_VEL, IIO_MOD_ ## _mod, \ | |
| ADIS16475_REG_ ## _mod ## _GYRO_L, \ | |
| ADIS16475_SCAN_GYRO_ ## _mod, 32, 32) | |
| #define ADIS16475_ACCEL_CHANNEL(_mod) \ | |
| ADIS16475_MOD_CHAN(IIO_ACCEL, IIO_MOD_ ## _mod, \ | |
| ADIS16475_REG_ ## _mod ## _ACCEL_L, \ | |
| ADIS16475_SCAN_ACCEL_ ## _mod, 32, 32) | |
| #define ADIS16475_TEMP_CHANNEL() { \ | |
| .type = IIO_TEMP, \ | |
| .indexed = 1, \ | |
| .channel = 0, \ | |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ | |
| BIT(IIO_CHAN_INFO_SCALE), \ | |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ | |
| BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \ | |
| .address = ADIS16475_REG_TEMP_OUT, \ | |
| .scan_index = ADIS16475_SCAN_TEMP, \ | |
| .scan_type = { \ | |
| .sign = 's', \ | |
| .realbits = 16, \ | |
| .storagebits = 16, \ | |
| .endianness = IIO_BE, \ | |
| }, \ | |
| } | |
| #define ADIS16475_MOD_CHAN_DELTA(_type, _mod, _address, _si, _r_bits, _s_bits) { \ | |
| .type = (_type), \ | |
| .modified = 1, \ | |
| .channel2 = (_mod), \ | |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ | |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ | |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ | |
| BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \ | |
| .address = (_address), \ | |
| .scan_index = _si, \ | |
| .scan_type = { \ | |
| .sign = 's', \ | |
| .realbits = (_r_bits), \ | |
| .storagebits = (_s_bits), \ | |
| .endianness = IIO_BE, \ | |
| }, \ | |
| } | |
| #define ADIS16475_DELTANG_CHAN(_mod) \ | |
| ADIS16475_MOD_CHAN_DELTA(IIO_DELTA_ANGL, IIO_MOD_ ## _mod, \ | |
| ADIS16475_REG_ ## _mod ## _DELTANG_L, ADIS16475_SCAN_DELTANG_ ## _mod, 32, 32) | |
| #define ADIS16475_DELTVEL_CHAN(_mod) \ | |
| ADIS16475_MOD_CHAN_DELTA(IIO_DELTA_VELOCITY, IIO_MOD_ ## _mod, \ | |
| ADIS16475_REG_ ## _mod ## _DELTVEL_L, ADIS16475_SCAN_DELTVEL_ ## _mod, 32, 32) | |
| #define ADIS16475_DELTANG_CHAN_NO_SCAN(_mod) \ | |
| ADIS16475_MOD_CHAN_DELTA(IIO_DELTA_ANGL, IIO_MOD_ ## _mod, \ | |
| ADIS16475_REG_ ## _mod ## _DELTANG_L, -1, 32, 32) | |
| #define ADIS16475_DELTVEL_CHAN_NO_SCAN(_mod) \ | |
| ADIS16475_MOD_CHAN_DELTA(IIO_DELTA_VELOCITY, IIO_MOD_ ## _mod, \ | |
| ADIS16475_REG_ ## _mod ## _DELTVEL_L, -1, 32, 32) | |
| static const struct iio_chan_spec adis16477_channels[] = { | |
| ADIS16475_GYRO_CHANNEL(X), | |
| ADIS16475_GYRO_CHANNEL(Y), | |
| ADIS16475_GYRO_CHANNEL(Z), | |
| ADIS16475_ACCEL_CHANNEL(X), | |
| ADIS16475_ACCEL_CHANNEL(Y), | |
| ADIS16475_ACCEL_CHANNEL(Z), | |
| ADIS16475_TEMP_CHANNEL(), | |
| ADIS16475_DELTANG_CHAN(X), | |
| ADIS16475_DELTANG_CHAN(Y), | |
| ADIS16475_DELTANG_CHAN(Z), | |
| ADIS16475_DELTVEL_CHAN(X), | |
| ADIS16475_DELTVEL_CHAN(Y), | |
| ADIS16475_DELTVEL_CHAN(Z), | |
| IIO_CHAN_SOFT_TIMESTAMP(13) | |
| }; | |
| static const struct iio_chan_spec adis16475_channels[] = { | |
| ADIS16475_GYRO_CHANNEL(X), | |
| ADIS16475_GYRO_CHANNEL(Y), | |
| ADIS16475_GYRO_CHANNEL(Z), | |
| ADIS16475_ACCEL_CHANNEL(X), | |
| ADIS16475_ACCEL_CHANNEL(Y), | |
| ADIS16475_ACCEL_CHANNEL(Z), | |
| ADIS16475_TEMP_CHANNEL(), | |
| ADIS16475_DELTANG_CHAN_NO_SCAN(X), | |
| ADIS16475_DELTANG_CHAN_NO_SCAN(Y), | |
| ADIS16475_DELTANG_CHAN_NO_SCAN(Z), | |
| ADIS16475_DELTVEL_CHAN_NO_SCAN(X), | |
| ADIS16475_DELTVEL_CHAN_NO_SCAN(Y), | |
| ADIS16475_DELTVEL_CHAN_NO_SCAN(Z), | |
| IIO_CHAN_SOFT_TIMESTAMP(7) | |
| }; | |
| static const struct iio_chan_spec adis16575_channels[] = { | |
| ADIS16475_GYRO_CHANNEL(X), | |
| ADIS16475_GYRO_CHANNEL(Y), | |
| ADIS16475_GYRO_CHANNEL(Z), | |
| ADIS16475_ACCEL_CHANNEL(X), | |
| ADIS16475_ACCEL_CHANNEL(Y), | |
| ADIS16475_ACCEL_CHANNEL(Z), | |
| ADIS16475_TEMP_CHANNEL(), | |
| ADIS16475_DELTANG_CHAN(X), | |
| ADIS16475_DELTANG_CHAN(Y), | |
| ADIS16475_DELTANG_CHAN(Z), | |
| ADIS16475_DELTVEL_CHAN(X), | |
| ADIS16475_DELTVEL_CHAN(Y), | |
| ADIS16475_DELTVEL_CHAN(Z), | |
| }; | |
| enum adis16475_variant { | |
| ADIS16470, | |
| ADIS16475_1, | |
| ADIS16475_2, | |
| ADIS16475_3, | |
| ADIS16477_1, | |
| ADIS16477_2, | |
| ADIS16477_3, | |
| ADIS16465_1, | |
| ADIS16465_2, | |
| ADIS16465_3, | |
| ADIS16467_1, | |
| ADIS16467_2, | |
| ADIS16467_3, | |
| ADIS16500, | |
| ADIS16501, | |
| ADIS16505_1, | |
| ADIS16505_2, | |
| ADIS16505_3, | |
| ADIS16507_1, | |
| ADIS16507_2, | |
| ADIS16507_3, | |
| ADIS16575_2, | |
| ADIS16575_3, | |
| ADIS16576_2, | |
| ADIS16576_3, | |
| ADIS16577_2, | |
| ADIS16577_3, | |
| }; | |
| enum { | |
| ADIS16475_DIAG_STAT_DATA_PATH = 1, | |
| ADIS16475_DIAG_STAT_FLASH_MEM, | |
| ADIS16475_DIAG_STAT_SPI, | |
| ADIS16475_DIAG_STAT_STANDBY, | |
| ADIS16475_DIAG_STAT_SENSOR, | |
| ADIS16475_DIAG_STAT_MEMORY, | |
| ADIS16475_DIAG_STAT_CLK, | |
| }; | |
| static const char * const adis16475_status_error_msgs[] = { | |
| [ADIS16475_DIAG_STAT_DATA_PATH] = "Data Path Overrun", | |
| [ADIS16475_DIAG_STAT_FLASH_MEM] = "Flash memory update failure", | |
| [ADIS16475_DIAG_STAT_SPI] = "SPI communication error", | |
| [ADIS16475_DIAG_STAT_STANDBY] = "Standby mode", | |
| [ADIS16475_DIAG_STAT_SENSOR] = "Sensor failure", | |
| [ADIS16475_DIAG_STAT_MEMORY] = "Memory failure", | |
| [ADIS16475_DIAG_STAT_CLK] = "Clock error", | |
| }; | |
| #define ADIS16475_DATA(_prod_id, _timeouts, _burst_max_len, _burst_max_speed_hz, _has_fifo) \ | |
| { \ | |
| .msc_ctrl_reg = ADIS16475_REG_MSG_CTRL, \ | |
| .glob_cmd_reg = ADIS16475_REG_GLOB_CMD, \ | |
| .diag_stat_reg = ADIS16475_REG_DIAG_STAT, \ | |
| .prod_id_reg = ADIS16475_REG_PROD_ID, \ | |
| .prod_id = (_prod_id), \ | |
| .self_test_mask = BIT(2), \ | |
| .self_test_reg = ADIS16475_REG_GLOB_CMD, \ | |
| .cs_change_delay = 16, \ | |
| .read_delay = 5, \ | |
| .write_delay = 5, \ | |
| .status_error_msgs = adis16475_status_error_msgs, \ | |
| .status_error_mask = BIT(ADIS16475_DIAG_STAT_DATA_PATH) | \ | |
| BIT(ADIS16475_DIAG_STAT_FLASH_MEM) | \ | |
| BIT(ADIS16475_DIAG_STAT_SPI) | \ | |
| BIT(ADIS16475_DIAG_STAT_STANDBY) | \ | |
| BIT(ADIS16475_DIAG_STAT_SENSOR) | \ | |
| BIT(ADIS16475_DIAG_STAT_MEMORY) | \ | |
| BIT(ADIS16475_DIAG_STAT_CLK), \ | |
| .unmasked_drdy = true, \ | |
| .has_fifo = _has_fifo, \ | |
| .timeouts = (_timeouts), \ | |
| .burst_reg_cmd = ADIS16475_REG_GLOB_CMD, \ | |
| .burst_len = ADIS16475_BURST_MAX_DATA, \ | |
| .burst_max_len = _burst_max_len, \ | |
| .burst_max_speed_hz = _burst_max_speed_hz \ | |
| } | |
| static const struct adis16475_sync adis16475_sync_mode[] = { | |
| { ADIS16475_SYNC_OUTPUT }, | |
| { ADIS16475_SYNC_DIRECT, 1900, 2100 }, | |
| { ADIS16475_SYNC_SCALED, 1, 128 }, | |
| { ADIS16475_SYNC_PULSE, 1000, 2100 }, | |
| }; | |
| static const struct adis16475_sync adis16575_sync_mode[] = { | |
| { ADIS16475_SYNC_OUTPUT }, | |
| { ADIS16475_SYNC_DIRECT, 1900, 4100 }, | |
| { ADIS16475_SYNC_SCALED, 1, 400 }, | |
| }; | |
| static const struct adis_timeout adis16475_timeouts = { | |
| .reset_ms = 200, | |
| .sw_reset_ms = 200, | |
| .self_test_ms = 20, | |
| }; | |
| static const struct adis_timeout adis1650x_timeouts = { | |
| .reset_ms = 260, | |
| .sw_reset_ms = 260, | |
| .self_test_ms = 30, | |
| }; | |
| static const struct adis16475_chip_info adis16475_chip_info[] = { | |
| [ADIS16470] = { | |
| .name = "adis16470", | |
| .num_channels = ARRAY_SIZE(adis16475_channels), | |
| .channels = adis16475_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), | |
| .accel_max_val = 1, | |
| .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(2160), | |
| .deltvel_max_val = 400, | |
| .int_clk = 2000, | |
| .max_dec = 1999, | |
| .sync = adis16475_sync_mode, | |
| .num_sync = ARRAY_SIZE(adis16475_sync_mode), | |
| .adis_data = ADIS16475_DATA(16470, &adis16475_timeouts, | |
| ADIS16475_BURST32_MAX_DATA_NO_TS32, | |
| ADIS16475_BURST_MAX_SPEED, false), | |
| }, | |
| [ADIS16475_1] = { | |
| .name = "adis16475-1", | |
| .num_channels = ARRAY_SIZE(adis16475_channels), | |
| .channels = adis16475_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16), | |
| .accel_max_val = 1, | |
| .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(360), | |
| .deltvel_max_val = 100, | |
| .int_clk = 2000, | |
| .max_dec = 1999, | |
| .sync = adis16475_sync_mode, | |
| .num_sync = ARRAY_SIZE(adis16475_sync_mode), | |
| .adis_data = ADIS16475_DATA(16475, &adis16475_timeouts, | |
| ADIS16475_BURST32_MAX_DATA_NO_TS32, | |
| ADIS16475_BURST_MAX_SPEED, false), | |
| }, | |
| [ADIS16475_2] = { | |
| .name = "adis16475-2", | |
| .num_channels = ARRAY_SIZE(adis16475_channels), | |
| .channels = adis16475_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16), | |
| .accel_max_val = 1, | |
| .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(720), | |
| .deltvel_max_val = 100, | |
| .int_clk = 2000, | |
| .max_dec = 1999, | |
| .sync = adis16475_sync_mode, | |
| .num_sync = ARRAY_SIZE(adis16475_sync_mode), | |
| .adis_data = ADIS16475_DATA(16475, &adis16475_timeouts, | |
| ADIS16475_BURST32_MAX_DATA_NO_TS32, | |
| ADIS16475_BURST_MAX_SPEED, false), | |
| }, | |
| [ADIS16475_3] = { | |
| .name = "adis16475-3", | |
| .num_channels = ARRAY_SIZE(adis16475_channels), | |
| .channels = adis16475_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), | |
| .accel_max_val = 1, | |
| .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(2160), | |
| .deltvel_max_val = 100, | |
| .int_clk = 2000, | |
| .max_dec = 1999, | |
| .sync = adis16475_sync_mode, | |
| .num_sync = ARRAY_SIZE(adis16475_sync_mode), | |
| .adis_data = ADIS16475_DATA(16475, &adis16475_timeouts, | |
| ADIS16475_BURST32_MAX_DATA_NO_TS32, | |
| ADIS16475_BURST_MAX_SPEED, false), | |
| }, | |
| [ADIS16477_1] = { | |
| .name = "adis16477-1", | |
| .num_channels = ARRAY_SIZE(adis16477_channels), | |
| .channels = adis16477_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16), | |
| .accel_max_val = 1, | |
| .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(360), | |
| .deltvel_max_val = 400, | |
| .int_clk = 2000, | |
| .max_dec = 1999, | |
| .sync = adis16475_sync_mode, | |
| .num_sync = ARRAY_SIZE(adis16475_sync_mode), | |
| .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, | |
| .adis_data = ADIS16475_DATA(16477, &adis16475_timeouts, | |
| ADIS16475_BURST32_MAX_DATA_NO_TS32, | |
| ADIS16475_BURST_MAX_SPEED, false), | |
| }, | |
| [ADIS16477_2] = { | |
| .name = "adis16477-2", | |
| .num_channels = ARRAY_SIZE(adis16477_channels), | |
| .channels = adis16477_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16), | |
| .accel_max_val = 1, | |
| .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(720), | |
| .deltvel_max_val = 400, | |
| .int_clk = 2000, | |
| .max_dec = 1999, | |
| .sync = adis16475_sync_mode, | |
| .num_sync = ARRAY_SIZE(adis16475_sync_mode), | |
| .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, | |
| .adis_data = ADIS16475_DATA(16477, &adis16475_timeouts, | |
| ADIS16475_BURST32_MAX_DATA_NO_TS32, | |
| ADIS16475_BURST_MAX_SPEED, false), | |
| }, | |
| [ADIS16477_3] = { | |
| .name = "adis16477-3", | |
| .num_channels = ARRAY_SIZE(adis16477_channels), | |
| .channels = adis16477_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), | |
| .accel_max_val = 1, | |
| .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(2160), | |
| .deltvel_max_val = 400, | |
| .int_clk = 2000, | |
| .max_dec = 1999, | |
| .sync = adis16475_sync_mode, | |
| .num_sync = ARRAY_SIZE(adis16475_sync_mode), | |
| .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, | |
| .adis_data = ADIS16475_DATA(16477, &adis16475_timeouts, | |
| ADIS16475_BURST32_MAX_DATA_NO_TS32, | |
| ADIS16475_BURST_MAX_SPEED, false), | |
| }, | |
| [ADIS16465_1] = { | |
| .name = "adis16465-1", | |
| .num_channels = ARRAY_SIZE(adis16475_channels), | |
| .channels = adis16475_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16), | |
| .accel_max_val = 1, | |
| .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(360), | |
| .deltvel_max_val = 100, | |
| .int_clk = 2000, | |
| .max_dec = 1999, | |
| .sync = adis16475_sync_mode, | |
| .num_sync = ARRAY_SIZE(adis16475_sync_mode), | |
| .adis_data = ADIS16475_DATA(16465, &adis16475_timeouts, | |
| ADIS16475_BURST32_MAX_DATA_NO_TS32, | |
| ADIS16475_BURST_MAX_SPEED, false), | |
| }, | |
| [ADIS16465_2] = { | |
| .name = "adis16465-2", | |
| .num_channels = ARRAY_SIZE(adis16475_channels), | |
| .channels = adis16475_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16), | |
| .accel_max_val = 1, | |
| .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(720), | |
| .deltvel_max_val = 100, | |
| .int_clk = 2000, | |
| .max_dec = 1999, | |
| .sync = adis16475_sync_mode, | |
| .num_sync = ARRAY_SIZE(adis16475_sync_mode), | |
| .adis_data = ADIS16475_DATA(16465, &adis16475_timeouts, | |
| ADIS16475_BURST32_MAX_DATA_NO_TS32, | |
| ADIS16475_BURST_MAX_SPEED, false), | |
| }, | |
| [ADIS16465_3] = { | |
| .name = "adis16465-3", | |
| .num_channels = ARRAY_SIZE(adis16475_channels), | |
| .channels = adis16475_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), | |
| .accel_max_val = 1, | |
| .accel_max_scale = IIO_M_S_2_TO_G(4000 << 16), | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(2160), | |
| .deltvel_max_val = 100, | |
| .int_clk = 2000, | |
| .max_dec = 1999, | |
| .sync = adis16475_sync_mode, | |
| .num_sync = ARRAY_SIZE(adis16475_sync_mode), | |
| .adis_data = ADIS16475_DATA(16465, &adis16475_timeouts, | |
| ADIS16475_BURST32_MAX_DATA_NO_TS32, | |
| ADIS16475_BURST_MAX_SPEED, false), | |
| }, | |
| [ADIS16467_1] = { | |
| .name = "adis16467-1", | |
| .num_channels = ARRAY_SIZE(adis16475_channels), | |
| .channels = adis16475_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16), | |
| .accel_max_val = 1, | |
| .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(360), | |
| .deltvel_max_val = 400, | |
| .int_clk = 2000, | |
| .max_dec = 1999, | |
| .sync = adis16475_sync_mode, | |
| .num_sync = ARRAY_SIZE(adis16475_sync_mode), | |
| .adis_data = ADIS16475_DATA(16467, &adis16475_timeouts, | |
| ADIS16475_BURST32_MAX_DATA_NO_TS32, | |
| ADIS16475_BURST_MAX_SPEED, false), | |
| }, | |
| [ADIS16467_2] = { | |
| .name = "adis16467-2", | |
| .num_channels = ARRAY_SIZE(adis16475_channels), | |
| .channels = adis16475_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16), | |
| .accel_max_val = 1, | |
| .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(720), | |
| .deltvel_max_val = 400, | |
| .int_clk = 2000, | |
| .max_dec = 1999, | |
| .sync = adis16475_sync_mode, | |
| .num_sync = ARRAY_SIZE(adis16475_sync_mode), | |
| .adis_data = ADIS16475_DATA(16467, &adis16475_timeouts, | |
| ADIS16475_BURST32_MAX_DATA_NO_TS32, | |
| ADIS16475_BURST_MAX_SPEED, false), | |
| }, | |
| [ADIS16467_3] = { | |
| .name = "adis16467-3", | |
| .num_channels = ARRAY_SIZE(adis16475_channels), | |
| .channels = adis16475_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), | |
| .accel_max_val = 1, | |
| .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(2160), | |
| .deltvel_max_val = 400, | |
| .int_clk = 2000, | |
| .max_dec = 1999, | |
| .sync = adis16475_sync_mode, | |
| .num_sync = ARRAY_SIZE(adis16475_sync_mode), | |
| .adis_data = ADIS16475_DATA(16467, &adis16475_timeouts, | |
| ADIS16475_BURST32_MAX_DATA_NO_TS32, | |
| ADIS16475_BURST_MAX_SPEED, false), | |
| }, | |
| [ADIS16500] = { | |
| .name = "adis16500", | |
| .num_channels = ARRAY_SIZE(adis16477_channels), | |
| .channels = adis16477_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), | |
| .accel_max_val = 392, | |
| .accel_max_scale = 32000 << 16, | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(2160), | |
| .deltvel_max_val = 400, | |
| .int_clk = 2000, | |
| .max_dec = 1999, | |
| .sync = adis16475_sync_mode, | |
| /* pulse sync not supported */ | |
| .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, | |
| .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, | |
| .adis_data = ADIS16475_DATA(16500, &adis1650x_timeouts, | |
| ADIS16475_BURST32_MAX_DATA_NO_TS32, | |
| ADIS16475_BURST_MAX_SPEED, false), | |
| }, | |
| [ADIS16501] = { | |
| .name = "adis16501", | |
| .num_channels = ARRAY_SIZE(adis16477_channels), | |
| .channels = adis16477_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16), | |
| .accel_max_val = 1, | |
| .accel_max_scale = IIO_M_S_2_TO_G(800 << 16), | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(720), | |
| .deltvel_max_val = 125, | |
| .int_clk = 2000, | |
| .max_dec = 1999, | |
| .sync = adis16475_sync_mode, | |
| /* pulse sync not supported */ | |
| .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, | |
| .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, | |
| .adis_data = ADIS16475_DATA(16501, &adis1650x_timeouts, | |
| ADIS16475_BURST32_MAX_DATA_NO_TS32, | |
| ADIS16475_BURST_MAX_SPEED, false), | |
| }, | |
| [ADIS16505_1] = { | |
| .name = "adis16505-1", | |
| .num_channels = ARRAY_SIZE(adis16477_channels), | |
| .channels = adis16477_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16), | |
| .accel_max_val = 78, | |
| .accel_max_scale = 32000 << 16, | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(360), | |
| .deltvel_max_val = 100, | |
| .int_clk = 2000, | |
| .max_dec = 1999, | |
| .sync = adis16475_sync_mode, | |
| /* pulse sync not supported */ | |
| .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, | |
| .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, | |
| .adis_data = ADIS16475_DATA(16505, &adis1650x_timeouts, | |
| ADIS16475_BURST32_MAX_DATA_NO_TS32, | |
| ADIS16475_BURST_MAX_SPEED, false), | |
| }, | |
| [ADIS16505_2] = { | |
| .name = "adis16505-2", | |
| .num_channels = ARRAY_SIZE(adis16477_channels), | |
| .channels = adis16477_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16), | |
| .accel_max_val = 78, | |
| .accel_max_scale = 32000 << 16, | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(720), | |
| .deltvel_max_val = 100, | |
| .int_clk = 2000, | |
| .max_dec = 1999, | |
| .sync = adis16475_sync_mode, | |
| /* pulse sync not supported */ | |
| .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, | |
| .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, | |
| .adis_data = ADIS16475_DATA(16505, &adis1650x_timeouts, | |
| ADIS16475_BURST32_MAX_DATA_NO_TS32, | |
| ADIS16475_BURST_MAX_SPEED, false), | |
| }, | |
| [ADIS16505_3] = { | |
| .name = "adis16505-3", | |
| .num_channels = ARRAY_SIZE(adis16477_channels), | |
| .channels = adis16477_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), | |
| .accel_max_val = 78, | |
| .accel_max_scale = 32000 << 16, | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(2160), | |
| .deltvel_max_val = 100, | |
| .int_clk = 2000, | |
| .max_dec = 1999, | |
| .sync = adis16475_sync_mode, | |
| /* pulse sync not supported */ | |
| .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, | |
| .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, | |
| .adis_data = ADIS16475_DATA(16505, &adis1650x_timeouts, | |
| ADIS16475_BURST32_MAX_DATA_NO_TS32, | |
| ADIS16475_BURST_MAX_SPEED, false), | |
| }, | |
| [ADIS16507_1] = { | |
| .name = "adis16507-1", | |
| .num_channels = ARRAY_SIZE(adis16477_channels), | |
| .channels = adis16477_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(160 << 16), | |
| .accel_max_val = 392, | |
| .accel_max_scale = 32000 << 16, | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(360), | |
| .deltvel_max_val = 400, | |
| .int_clk = 2000, | |
| .max_dec = 1999, | |
| .sync = adis16475_sync_mode, | |
| /* pulse sync not supported */ | |
| .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, | |
| .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, | |
| .adis_data = ADIS16475_DATA(16507, &adis1650x_timeouts, | |
| ADIS16475_BURST32_MAX_DATA_NO_TS32, | |
| ADIS16475_BURST_MAX_SPEED, false), | |
| }, | |
| [ADIS16507_2] = { | |
| .name = "adis16507-2", | |
| .num_channels = ARRAY_SIZE(adis16477_channels), | |
| .channels = adis16477_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16), | |
| .accel_max_val = 392, | |
| .accel_max_scale = 32000 << 16, | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(720), | |
| .deltvel_max_val = 400, | |
| .int_clk = 2000, | |
| .max_dec = 1999, | |
| .sync = adis16475_sync_mode, | |
| /* pulse sync not supported */ | |
| .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, | |
| .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, | |
| .adis_data = ADIS16475_DATA(16507, &adis1650x_timeouts, | |
| ADIS16475_BURST32_MAX_DATA_NO_TS32, | |
| ADIS16475_BURST_MAX_SPEED, false), | |
| }, | |
| [ADIS16507_3] = { | |
| .name = "adis16507-3", | |
| .num_channels = ARRAY_SIZE(adis16477_channels), | |
| .channels = adis16477_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), | |
| .accel_max_val = 392, | |
| .accel_max_scale = 32000 << 16, | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(2160), | |
| .deltvel_max_val = 400, | |
| .int_clk = 2000, | |
| .max_dec = 1999, | |
| .sync = adis16475_sync_mode, | |
| /* pulse sync not supported */ | |
| .num_sync = ARRAY_SIZE(adis16475_sync_mode) - 1, | |
| .flags = ADIS16475_HAS_BURST32 | ADIS16475_HAS_BURST_DELTA_DATA, | |
| .adis_data = ADIS16475_DATA(16507, &adis1650x_timeouts, | |
| ADIS16475_BURST32_MAX_DATA_NO_TS32, | |
| ADIS16475_BURST_MAX_SPEED, false), | |
| }, | |
| [ADIS16575_2] = { | |
| .name = "adis16575-2", | |
| .num_channels = ARRAY_SIZE(adis16575_channels), | |
| .channels = adis16575_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16), | |
| .accel_max_val = 8, | |
| .accel_max_scale = IIO_M_S_2_TO_G(32000 << 16), | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(450), | |
| .deltvel_max_val = 100, | |
| .int_clk = 4000, | |
| .max_dec = 3999, | |
| .sync = adis16575_sync_mode, | |
| .num_sync = ARRAY_SIZE(adis16575_sync_mode), | |
| .flags = ADIS16475_HAS_BURST32 | | |
| ADIS16475_HAS_BURST_DELTA_DATA | | |
| ADIS16475_NEEDS_BURST_REQUEST | | |
| ADIS16475_HAS_TIMESTAMP32, | |
| .adis_data = ADIS16475_DATA(16575, &adis16475_timeouts, | |
| ADIS16575_BURST32_DATA_TS32, | |
| ADIS16575_BURST_MAX_SPEED, true), | |
| }, | |
| [ADIS16575_3] = { | |
| .name = "adis16575-3", | |
| .num_channels = ARRAY_SIZE(adis16575_channels), | |
| .channels = adis16575_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), | |
| .accel_max_val = 8, | |
| .accel_max_scale = IIO_M_S_2_TO_G(32000 << 16), | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(2000), | |
| .deltvel_max_val = 100, | |
| .int_clk = 4000, | |
| .max_dec = 3999, | |
| .sync = adis16575_sync_mode, | |
| .num_sync = ARRAY_SIZE(adis16575_sync_mode), | |
| .flags = ADIS16475_HAS_BURST32 | | |
| ADIS16475_HAS_BURST_DELTA_DATA | | |
| ADIS16475_NEEDS_BURST_REQUEST | | |
| ADIS16475_HAS_TIMESTAMP32, | |
| .adis_data = ADIS16475_DATA(16575, &adis16475_timeouts, | |
| ADIS16575_BURST32_DATA_TS32, | |
| ADIS16575_BURST_MAX_SPEED, true), | |
| }, | |
| [ADIS16576_2] = { | |
| .name = "adis16576-2", | |
| .num_channels = ARRAY_SIZE(adis16575_channels), | |
| .channels = adis16575_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16), | |
| .accel_max_val = 40, | |
| .accel_max_scale = IIO_M_S_2_TO_G(32000 << 16), | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(450), | |
| .deltvel_max_val = 125, | |
| .int_clk = 4000, | |
| .max_dec = 3999, | |
| .sync = adis16575_sync_mode, | |
| .num_sync = ARRAY_SIZE(adis16575_sync_mode), | |
| .flags = ADIS16475_HAS_BURST32 | | |
| ADIS16475_HAS_BURST_DELTA_DATA | | |
| ADIS16475_NEEDS_BURST_REQUEST | | |
| ADIS16475_HAS_TIMESTAMP32, | |
| .adis_data = ADIS16475_DATA(16576, &adis16475_timeouts, | |
| ADIS16575_BURST32_DATA_TS32, | |
| ADIS16575_BURST_MAX_SPEED, true), | |
| }, | |
| [ADIS16576_3] = { | |
| .name = "adis16576-3", | |
| .num_channels = ARRAY_SIZE(adis16575_channels), | |
| .channels = adis16575_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), | |
| .accel_max_val = 40, | |
| .accel_max_scale = IIO_M_S_2_TO_G(32000 << 16), | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(2000), | |
| .deltvel_max_val = 125, | |
| .int_clk = 4000, | |
| .max_dec = 3999, | |
| .sync = adis16575_sync_mode, | |
| .num_sync = ARRAY_SIZE(adis16575_sync_mode), | |
| .flags = ADIS16475_HAS_BURST32 | | |
| ADIS16475_HAS_BURST_DELTA_DATA | | |
| ADIS16475_NEEDS_BURST_REQUEST | | |
| ADIS16475_HAS_TIMESTAMP32, | |
| .adis_data = ADIS16475_DATA(16576, &adis16475_timeouts, | |
| ADIS16575_BURST32_DATA_TS32, | |
| ADIS16575_BURST_MAX_SPEED, true), | |
| }, | |
| [ADIS16577_2] = { | |
| .name = "adis16577-2", | |
| .num_channels = ARRAY_SIZE(adis16575_channels), | |
| .channels = adis16575_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(40 << 16), | |
| .accel_max_val = 40, | |
| .accel_max_scale = IIO_M_S_2_TO_G(32000 << 16), | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(450), | |
| .deltvel_max_val = 400, | |
| .int_clk = 4000, | |
| .max_dec = 3999, | |
| .sync = adis16575_sync_mode, | |
| .num_sync = ARRAY_SIZE(adis16575_sync_mode), | |
| .flags = ADIS16475_HAS_BURST32 | | |
| ADIS16475_HAS_BURST_DELTA_DATA | | |
| ADIS16475_NEEDS_BURST_REQUEST | | |
| ADIS16475_HAS_TIMESTAMP32, | |
| .adis_data = ADIS16475_DATA(16577, &adis16475_timeouts, | |
| ADIS16575_BURST32_DATA_TS32, | |
| ADIS16575_BURST_MAX_SPEED, true), | |
| }, | |
| [ADIS16577_3] = { | |
| .name = "adis16577-3", | |
| .num_channels = ARRAY_SIZE(adis16575_channels), | |
| .channels = adis16575_channels, | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(10 << 16), | |
| .accel_max_val = 40, | |
| .accel_max_scale = IIO_M_S_2_TO_G(32000 << 16), | |
| .temp_scale = 100, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(2000), | |
| .deltvel_max_val = 400, | |
| .int_clk = 4000, | |
| .max_dec = 3999, | |
| .sync = adis16575_sync_mode, | |
| .num_sync = ARRAY_SIZE(adis16575_sync_mode), | |
| .flags = ADIS16475_HAS_BURST32 | | |
| ADIS16475_HAS_BURST_DELTA_DATA | | |
| ADIS16475_NEEDS_BURST_REQUEST | | |
| ADIS16475_HAS_TIMESTAMP32, | |
| .adis_data = ADIS16475_DATA(16577, &adis16475_timeouts, | |
| ADIS16575_BURST32_DATA_TS32, | |
| ADIS16575_BURST_MAX_SPEED, true), | |
| }, | |
| }; | |
| static int adis16475_update_scan_mode(struct iio_dev *indio_dev, | |
| const unsigned long *scan_mask) | |
| { | |
| u16 en; | |
| int ret; | |
| struct adis16475 *st = iio_priv(indio_dev); | |
| if (st->info->flags & ADIS16475_HAS_BURST_DELTA_DATA) { | |
| if ((*scan_mask & ADIS16500_BURST_DATA_SEL_0_CHN_MASK) && | |
| (*scan_mask & ADIS16500_BURST_DATA_SEL_1_CHN_MASK)) | |
| return -EINVAL; | |
| if (*scan_mask & ADIS16500_BURST_DATA_SEL_0_CHN_MASK) | |
| en = FIELD_PREP(ADIS16500_BURST_DATA_SEL_MASK, 0); | |
| else | |
| en = FIELD_PREP(ADIS16500_BURST_DATA_SEL_MASK, 1); | |
| ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL, | |
| ADIS16500_BURST_DATA_SEL_MASK, en); | |
| if (ret) | |
| return ret; | |
| } | |
| return adis_update_scan_mode(indio_dev, scan_mask); | |
| } | |
| static const struct iio_info adis16475_info = { | |
| .read_raw = &adis16475_read_raw, | |
| .write_raw = &adis16475_write_raw, | |
| .update_scan_mode = adis16475_update_scan_mode, | |
| .debugfs_reg_access = adis_debugfs_reg_access, | |
| }; | |
| static const struct iio_info adis16575_info = { | |
| .read_raw = &adis16475_read_raw, | |
| .write_raw = &adis16475_write_raw, | |
| .update_scan_mode = adis16475_update_scan_mode, | |
| .debugfs_reg_access = adis_debugfs_reg_access, | |
| .hwfifo_set_watermark = adis16475_set_watermark, | |
| }; | |
| static bool adis16475_validate_crc(const u8 *buffer, u16 crc, | |
| u16 burst_size, u16 start_idx) | |
| { | |
| int i; | |
| for (i = start_idx; i < burst_size - 2; i++) | |
| crc -= buffer[i]; | |
| return crc == 0; | |
| } | |
| static void adis16475_burst32_check(struct adis16475 *st) | |
| { | |
| int ret; | |
| struct adis *adis = &st->adis; | |
| u8 timestamp32 = 0; | |
| if (!(st->info->flags & ADIS16475_HAS_BURST32)) | |
| return; | |
| if (st->info->flags & ADIS16475_HAS_TIMESTAMP32) | |
| timestamp32 = 1; | |
| if (st->lsb_flag && !st->burst32) { | |
| const u16 en = ADIS16500_BURST32(1); | |
| ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL, | |
| ADIS16500_BURST32_MASK, en); | |
| if (ret) | |
| return; | |
| st->burst32 = true; | |
| /* | |
| * In 32-bit mode we need extra 2 bytes for all gyro | |
| * and accel channels. | |
| * If the device has 32-bit timestamp value we need 2 extra | |
| * bytes for it. | |
| */ | |
| adis->burst_extra_len = (6 + timestamp32) * sizeof(u16); | |
| adis->xfer[1].len += (6 + timestamp32) * sizeof(u16); | |
| dev_dbg(&adis->spi->dev, "Enable burst32 mode, xfer:%d", | |
| adis->xfer[1].len); | |
| } else if (!st->lsb_flag && st->burst32) { | |
| const u16 en = ADIS16500_BURST32(0); | |
| ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL, | |
| ADIS16500_BURST32_MASK, en); | |
| if (ret) | |
| return; | |
| st->burst32 = false; | |
| /* Remove the extra bits */ | |
| adis->burst_extra_len = 0; | |
| adis->xfer[1].len -= (6 + timestamp32) * sizeof(u16); | |
| dev_dbg(&adis->spi->dev, "Disable burst32 mode, xfer:%d\n", | |
| adis->xfer[1].len); | |
| } | |
| } | |
| static int adis16475_push_single_sample(struct iio_poll_func *pf) | |
| { | |
| struct iio_dev *indio_dev = pf->indio_dev; | |
| struct adis16475 *st = iio_priv(indio_dev); | |
| struct adis *adis = &st->adis; | |
| int ret, bit, buff_offset = 0, i = 0; | |
| __be16 *buffer; | |
| u16 crc; | |
| bool valid; | |
| u8 crc_offset = 9; | |
| u16 burst_size = ADIS16475_BURST_MAX_DATA; | |
| u16 start_idx = (st->info->flags & ADIS16475_HAS_TIMESTAMP32) ? 2 : 0; | |
| /* offset until the first element after gyro and accel */ | |
| const u8 offset = st->burst32 ? 13 : 7; | |
| if (st->burst32) { | |
| crc_offset = (st->info->flags & ADIS16475_HAS_TIMESTAMP32) ? 16 : 15; | |
| burst_size = adis->data->burst_max_len; | |
| } | |
| ret = spi_sync(adis->spi, &adis->msg); | |
| if (ret) | |
| return ret; | |
| buffer = adis->buffer; | |
| crc = be16_to_cpu(buffer[crc_offset]); | |
| valid = adis16475_validate_crc(adis->buffer, crc, burst_size, start_idx); | |
| if (!valid) { | |
| dev_err(&adis->spi->dev, "Invalid crc\n"); | |
| return -EINVAL; | |
| } | |
| iio_for_each_active_channel(indio_dev, bit) { | |
| /* | |
| * When burst mode is used, system flags is the first data | |
| * channel in the sequence, but the scan index is 7. | |
| */ | |
| switch (bit) { | |
| case ADIS16475_SCAN_TEMP: | |
| st->data[i++] = buffer[offset]; | |
| /* | |
| * The temperature channel has 16-bit storage size. | |
| * We need to perform the padding to have the buffer | |
| * elements naturally aligned in case there are any | |
| * 32-bit storage size channels enabled which have a | |
| * scan index higher than the temperature channel scan | |
| * index. | |
| */ | |
| if (*indio_dev->active_scan_mask & GENMASK(ADIS16475_SCAN_DELTVEL_Z, ADIS16475_SCAN_DELTANG_X)) | |
| st->data[i++] = 0; | |
| break; | |
| case ADIS16475_SCAN_DELTANG_X ... ADIS16475_SCAN_DELTVEL_Z: | |
| buff_offset = ADIS16475_SCAN_DELTANG_X; | |
| fallthrough; | |
| case ADIS16475_SCAN_GYRO_X ... ADIS16475_SCAN_ACCEL_Z: | |
| /* | |
| * The first 2 bytes on the received data are the | |
| * DIAG_STAT reg, hence the +1 offset here... | |
| */ | |
| if (st->burst32) { | |
| /* upper 16 */ | |
| st->data[i++] = buffer[(bit - buff_offset) * 2 + 2]; | |
| /* lower 16 */ | |
| st->data[i++] = buffer[(bit - buff_offset) * 2 + 1]; | |
| } else { | |
| st->data[i++] = buffer[(bit - buff_offset) + 1]; | |
| /* | |
| * Don't bother in doing the manual read if the | |
| * device supports burst32. burst32 will be | |
| * enabled in the next call to | |
| * adis16475_burst32_check()... | |
| */ | |
| if (st->lsb_flag && !(st->info->flags & ADIS16475_HAS_BURST32)) { | |
| u16 val = 0; | |
| const u32 reg = ADIS16475_REG_X_GYRO_L + | |
| bit * 4; | |
| adis_read_reg_16(adis, reg, &val); | |
| st->data[i++] = cpu_to_be16(val); | |
| } else { | |
| /* lower not used */ | |
| st->data[i++] = 0; | |
| } | |
| } | |
| break; | |
| } | |
| } | |
| /* There might not be a timestamp option for some devices. */ | |
| iio_push_to_buffers_with_timestamp(indio_dev, st->data, pf->timestamp); | |
| return 0; | |
| } | |
| static irqreturn_t adis16475_trigger_handler(int irq, void *p) | |
| { | |
| struct iio_poll_func *pf = p; | |
| struct iio_dev *indio_dev = pf->indio_dev; | |
| struct adis16475 *st = iio_priv(indio_dev); | |
| adis16475_push_single_sample(pf); | |
| /* | |
| * We only check the burst mode at the end of the current capture since | |
| * it takes a full data ready cycle for the device to update the burst | |
| * array. | |
| */ | |
| adis16475_burst32_check(st); | |
| iio_trigger_notify_done(indio_dev->trig); | |
| return IRQ_HANDLED; | |
| } | |
| /* | |
| * This function updates the first tx byte from the adis message based on the | |
| * given burst request. | |
| */ | |
| static void adis16575_update_msg_for_burst(struct adis *adis, u8 burst_req) | |
| { | |
| unsigned int burst_max_length; | |
| u8 *tx; | |
| if (adis->data->burst_max_len) | |
| burst_max_length = adis->data->burst_max_len; | |
| else | |
| burst_max_length = adis->data->burst_len + adis->burst_extra_len; | |
| tx = adis->buffer + burst_max_length; | |
| tx[0] = ADIS_READ_REG(burst_req); | |
| } | |
| static int adis16575_custom_burst_read(struct iio_poll_func *pf, u8 burst_req) | |
| { | |
| struct iio_dev *indio_dev = pf->indio_dev; | |
| struct adis16475 *st = iio_priv(indio_dev); | |
| struct adis *adis = &st->adis; | |
| adis16575_update_msg_for_burst(adis, burst_req); | |
| if (burst_req) | |
| return spi_sync(adis->spi, &adis->msg); | |
| return adis16475_push_single_sample(pf); | |
| } | |
| /* | |
| * This handler is meant to be used for devices which support burst readings | |
| * from FIFO (namely devices from adis1657x family). | |
| * In order to pop the FIFO the 0x68 0x00 FIFO pop burst request has to be sent. | |
| * If the previous device command was not a FIFO pop burst request, the FIFO pop | |
| * burst request will simply pop the FIFO without returning valid data. | |
| * For the nth consecutive burst request, thedevice will send the data popped | |
| * with the (n-1)th consecutive burst request. | |
| * In order to read the data which was popped previously, without popping the | |
| * FIFO, the 0x00 0x00 burst request has to be sent. | |
| * If after a 0x68 0x00 FIFO pop burst request, there is any other device access | |
| * different from a 0x68 0x00 or a 0x00 0x00 burst request, the FIFO data popped | |
| * previously will be lost. | |
| */ | |
| static irqreturn_t adis16475_trigger_handler_with_fifo(int irq, void *p) | |
| { | |
| struct iio_poll_func *pf = p; | |
| struct iio_dev *indio_dev = pf->indio_dev; | |
| struct adis16475 *st = iio_priv(indio_dev); | |
| struct adis *adis = &st->adis; | |
| int ret; | |
| u16 fifo_cnt, i; | |
| adis_dev_auto_lock(&st->adis); | |
| ret = __adis_read_reg_16(adis, ADIS16575_REG_FIFO_CNT, &fifo_cnt); | |
| if (ret) | |
| goto unlock; | |
| /* | |
| * If no sample is available, nothing can be read. This can happen if | |
| * a the used trigger has a higher frequency than the selected sample rate. | |
| */ | |
| if (!fifo_cnt) | |
| goto unlock; | |
| /* | |
| * First burst request - FIFO pop: popped data will be returned in the | |
| * next burst request. | |
| */ | |
| ret = adis16575_custom_burst_read(pf, adis->data->burst_reg_cmd); | |
| if (ret) | |
| goto unlock; | |
| for (i = 0; i < fifo_cnt - 1; i++) { | |
| ret = adis16475_push_single_sample(pf); | |
| if (ret) | |
| goto unlock; | |
| } | |
| /* FIFO read without popping */ | |
| ret = adis16575_custom_burst_read(pf, 0); | |
| unlock: | |
| /* | |
| * We only check the burst mode at the end of the current capture since | |
| * reading data from registers will impact the FIFO reading. | |
| */ | |
| adis16475_burst32_check(st); | |
| iio_trigger_notify_done(indio_dev->trig); | |
| return IRQ_HANDLED; | |
| } | |
| static int adis16475_config_sync_mode(struct adis16475 *st) | |
| { | |
| int ret; | |
| struct device *dev = &st->adis.spi->dev; | |
| const struct adis16475_sync *sync; | |
| u32 sync_mode; | |
| u16 max_sample_rate = st->info->int_clk + 100; | |
| u16 val; | |
| /* if available, enable 4khz internal clock */ | |
| if (st->info->int_clk == 4000) { | |
| ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL, | |
| ADIS16575_SYNC_4KHZ_MASK, | |
| (u16)ADIS16575_SYNC_4KHZ(1)); | |
| if (ret) | |
| return ret; | |
| } | |
| /* default to internal clk */ | |
| st->clk_freq = st->info->int_clk * 1000; | |
| ret = device_property_read_u32(dev, "adi,sync-mode", &sync_mode); | |
| if (ret) | |
| return 0; | |
| if (sync_mode >= st->info->num_sync) { | |
| dev_err(dev, "Invalid sync mode: %u for %s\n", sync_mode, | |
| st->info->name); | |
| return -EINVAL; | |
| } | |
| sync = &st->info->sync[sync_mode]; | |
| st->sync_mode = sync->sync_mode; | |
| /* All the other modes require external input signal */ | |
| if (sync->sync_mode != ADIS16475_SYNC_OUTPUT) { | |
| struct clk *clk = devm_clk_get_enabled(dev, NULL); | |
| if (IS_ERR(clk)) | |
| return PTR_ERR(clk); | |
| st->clk_freq = clk_get_rate(clk); | |
| if (st->clk_freq < sync->min_rate || | |
| st->clk_freq > sync->max_rate) { | |
| dev_err(dev, | |
| "Clk rate:%u not in a valid range:[%u %u]\n", | |
| st->clk_freq, sync->min_rate, sync->max_rate); | |
| return -EINVAL; | |
| } | |
| if (sync->sync_mode == ADIS16475_SYNC_SCALED) { | |
| u16 up_scale; | |
| /* | |
| * In sync scaled mode, the IMU sample rate is the clk_freq * sync_scale. | |
| * Hence, default the IMU sample rate to the highest multiple of the input | |
| * clock lower than the IMU max sample rate. | |
| */ | |
| up_scale = max_sample_rate / st->clk_freq; | |
| ret = __adis_write_reg_16(&st->adis, | |
| ADIS16475_REG_UP_SCALE, | |
| up_scale); | |
| if (ret) | |
| return ret; | |
| } | |
| st->clk_freq *= 1000; | |
| } | |
| /* | |
| * Keep in mind that the mask for the clk modes in adis1650* | |
| * chips is different (1100 instead of 11100). However, we | |
| * are not configuring BIT(4) in these chips and the default | |
| * value is 0, so we are fine in doing the below operations. | |
| * I'm keeping this for simplicity and avoiding extra variables | |
| * in chip_info. | |
| */ | |
| val = ADIS16475_SYNC_MODE(sync->sync_mode); | |
| ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL, | |
| ADIS16475_SYNC_MODE_MASK, val); | |
| if (ret) | |
| return ret; | |
| usleep_range(250, 260); | |
| return 0; | |
| } | |
| static int adis16475_config_irq_pin(struct adis16475 *st) | |
| { | |
| int ret; | |
| u32 irq_type; | |
| u16 val = 0; | |
| u8 polarity; | |
| struct spi_device *spi = st->adis.spi; | |
| irq_type = irq_get_trigger_type(spi->irq); | |
| if (st->adis.data->has_fifo) { | |
| /* | |
| * It is possible to configure the fifo watermark pin polarity. | |
| * Furthermore, we need to update the adis struct if we want the | |
| * watermark pin active low. | |
| */ | |
| if (irq_type == IRQ_TYPE_LEVEL_HIGH) { | |
| polarity = 1; | |
| st->adis.irq_flag = IRQF_TRIGGER_HIGH; | |
| } else if (irq_type == IRQ_TYPE_LEVEL_LOW) { | |
| polarity = 0; | |
| st->adis.irq_flag = IRQF_TRIGGER_LOW; | |
| } else { | |
| dev_err(&spi->dev, "Invalid interrupt type 0x%x specified\n", | |
| irq_type); | |
| return -EINVAL; | |
| } | |
| /* Configure the watermark pin polarity. */ | |
| val = ADIS16575_WM_POL(polarity); | |
| ret = adis_update_bits(&st->adis, ADIS16475_REG_FIFO_CTRL, | |
| ADIS16575_WM_POL_MASK, val); | |
| if (ret) | |
| return ret; | |
| /* Enable watermark interrupt pin. */ | |
| ret = adis_update_bits(&st->adis, ADIS16475_REG_FIFO_CTRL, | |
| ADIS16575_WM_EN_MASK, | |
| (u16)ADIS16575_WM_EN(1)); | |
| if (ret) | |
| return ret; | |
| } else { | |
| /* | |
| * It is possible to configure the data ready polarity. Furthermore, we | |
| * need to update the adis struct if we want data ready as active low. | |
| */ | |
| if (irq_type == IRQ_TYPE_EDGE_RISING) { | |
| polarity = 1; | |
| st->adis.irq_flag = IRQF_TRIGGER_RISING; | |
| } else if (irq_type == IRQ_TYPE_EDGE_FALLING) { | |
| polarity = 0; | |
| st->adis.irq_flag = IRQF_TRIGGER_FALLING; | |
| } else { | |
| dev_err(&spi->dev, "Invalid interrupt type 0x%x specified\n", | |
| irq_type); | |
| return -EINVAL; | |
| } | |
| val = ADIS16475_MSG_CTRL_DR_POL(polarity); | |
| ret = __adis_update_bits(&st->adis, ADIS16475_REG_MSG_CTRL, | |
| ADIS16475_MSG_CTRL_DR_POL_MASK, val); | |
| if (ret) | |
| return ret; | |
| /* | |
| * There is a delay writing to any bits written to the MSC_CTRL | |
| * register. It should not be bigger than 200us, so 250 should be more | |
| * than enough! | |
| */ | |
| usleep_range(250, 260); | |
| } | |
| return 0; | |
| } | |
| static int adis16475_probe(struct spi_device *spi) | |
| { | |
| struct iio_dev *indio_dev; | |
| struct adis16475 *st; | |
| int ret; | |
| u16 val; | |
| indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); | |
| if (!indio_dev) | |
| return -ENOMEM; | |
| st = iio_priv(indio_dev); | |
| st->info = spi_get_device_match_data(spi); | |
| if (!st->info) | |
| return -EINVAL; | |
| ret = adis_init(&st->adis, indio_dev, spi, &st->info->adis_data); | |
| if (ret) | |
| return ret; | |
| indio_dev->name = st->info->name; | |
| indio_dev->channels = st->info->channels; | |
| indio_dev->num_channels = st->info->num_channels; | |
| if (st->adis.data->has_fifo) | |
| indio_dev->info = &adis16575_info; | |
| else | |
| indio_dev->info = &adis16475_info; | |
| indio_dev->modes = INDIO_DIRECT_MODE; | |
| ret = __adis_initial_startup(&st->adis); | |
| if (ret) | |
| return ret; | |
| ret = adis16475_config_irq_pin(st); | |
| if (ret) | |
| return ret; | |
| ret = adis16475_config_sync_mode(st); | |
| if (ret) | |
| return ret; | |
| if (st->adis.data->has_fifo) { | |
| ret = devm_adis_setup_buffer_and_trigger_with_attrs(&st->adis, indio_dev, | |
| adis16475_trigger_handler_with_fifo, | |
| &adis16475_buffer_ops, | |
| adis16475_fifo_attributes); | |
| if (ret) | |
| return ret; | |
| /* Update overflow behavior to always overwrite the oldest sample. */ | |
| val = ADIS16575_OVERWRITE_OLDEST; | |
| ret = adis_update_bits(&st->adis, ADIS16475_REG_FIFO_CTRL, | |
| ADIS16575_OVERFLOW_MASK, val); | |
| if (ret) | |
| return ret; | |
| } else { | |
| ret = devm_adis_setup_buffer_and_trigger(&st->adis, indio_dev, | |
| adis16475_trigger_handler); | |
| if (ret) | |
| return ret; | |
| } | |
| ret = devm_iio_device_register(&spi->dev, indio_dev); | |
| if (ret) | |
| return ret; | |
| adis16475_debugfs_init(indio_dev); | |
| return 0; | |
| } | |
| static const struct of_device_id adis16475_of_match[] = { | |
| { .compatible = "adi,adis16470", | |
| .data = &adis16475_chip_info[ADIS16470] }, | |
| { .compatible = "adi,adis16475-1", | |
| .data = &adis16475_chip_info[ADIS16475_1] }, | |
| { .compatible = "adi,adis16475-2", | |
| .data = &adis16475_chip_info[ADIS16475_2] }, | |
| { .compatible = "adi,adis16475-3", | |
| .data = &adis16475_chip_info[ADIS16475_3] }, | |
| { .compatible = "adi,adis16477-1", | |
| .data = &adis16475_chip_info[ADIS16477_1] }, | |
| { .compatible = "adi,adis16477-2", | |
| .data = &adis16475_chip_info[ADIS16477_2] }, | |
| { .compatible = "adi,adis16477-3", | |
| .data = &adis16475_chip_info[ADIS16477_3] }, | |
| { .compatible = "adi,adis16465-1", | |
| .data = &adis16475_chip_info[ADIS16465_1] }, | |
| { .compatible = "adi,adis16465-2", | |
| .data = &adis16475_chip_info[ADIS16465_2] }, | |
| { .compatible = "adi,adis16465-3", | |
| .data = &adis16475_chip_info[ADIS16465_3] }, | |
| { .compatible = "adi,adis16467-1", | |
| .data = &adis16475_chip_info[ADIS16467_1] }, | |
| { .compatible = "adi,adis16467-2", | |
| .data = &adis16475_chip_info[ADIS16467_2] }, | |
| { .compatible = "adi,adis16467-3", | |
| .data = &adis16475_chip_info[ADIS16467_3] }, | |
| { .compatible = "adi,adis16500", | |
| .data = &adis16475_chip_info[ADIS16500] }, | |
| { .compatible = "adi,adis16501", | |
| .data = &adis16475_chip_info[ADIS16501] }, | |
| { .compatible = "adi,adis16505-1", | |
| .data = &adis16475_chip_info[ADIS16505_1] }, | |
| { .compatible = "adi,adis16505-2", | |
| .data = &adis16475_chip_info[ADIS16505_2] }, | |
| { .compatible = "adi,adis16505-3", | |
| .data = &adis16475_chip_info[ADIS16505_3] }, | |
| { .compatible = "adi,adis16507-1", | |
| .data = &adis16475_chip_info[ADIS16507_1] }, | |
| { .compatible = "adi,adis16507-2", | |
| .data = &adis16475_chip_info[ADIS16507_2] }, | |
| { .compatible = "adi,adis16507-3", | |
| .data = &adis16475_chip_info[ADIS16507_3] }, | |
| { .compatible = "adi,adis16575-2", | |
| .data = &adis16475_chip_info[ADIS16575_2] }, | |
| { .compatible = "adi,adis16575-3", | |
| .data = &adis16475_chip_info[ADIS16575_3] }, | |
| { .compatible = "adi,adis16576-2", | |
| .data = &adis16475_chip_info[ADIS16576_2] }, | |
| { .compatible = "adi,adis16576-3", | |
| .data = &adis16475_chip_info[ADIS16576_3] }, | |
| { .compatible = "adi,adis16577-2", | |
| .data = &adis16475_chip_info[ADIS16577_2] }, | |
| { .compatible = "adi,adis16577-3", | |
| .data = &adis16475_chip_info[ADIS16577_3] }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, adis16475_of_match); | |
| static const struct spi_device_id adis16475_ids[] = { | |
| { "adis16470", (kernel_ulong_t)&adis16475_chip_info[ADIS16470] }, | |
| { "adis16475-1", (kernel_ulong_t)&adis16475_chip_info[ADIS16475_1] }, | |
| { "adis16475-2", (kernel_ulong_t)&adis16475_chip_info[ADIS16475_2] }, | |
| { "adis16475-3", (kernel_ulong_t)&adis16475_chip_info[ADIS16475_3] }, | |
| { "adis16477-1", (kernel_ulong_t)&adis16475_chip_info[ADIS16477_1] }, | |
| { "adis16477-2", (kernel_ulong_t)&adis16475_chip_info[ADIS16477_2] }, | |
| { "adis16477-3", (kernel_ulong_t)&adis16475_chip_info[ADIS16477_3] }, | |
| { "adis16465-1", (kernel_ulong_t)&adis16475_chip_info[ADIS16465_1] }, | |
| { "adis16465-2", (kernel_ulong_t)&adis16475_chip_info[ADIS16465_2] }, | |
| { "adis16465-3", (kernel_ulong_t)&adis16475_chip_info[ADIS16465_3] }, | |
| { "adis16467-1", (kernel_ulong_t)&adis16475_chip_info[ADIS16467_1] }, | |
| { "adis16467-2", (kernel_ulong_t)&adis16475_chip_info[ADIS16467_2] }, | |
| { "adis16467-3", (kernel_ulong_t)&adis16475_chip_info[ADIS16467_3] }, | |
| { "adis16500", (kernel_ulong_t)&adis16475_chip_info[ADIS16500] }, | |
| { "adis16501", (kernel_ulong_t)&adis16475_chip_info[ADIS16501] }, | |
| { "adis16505-1", (kernel_ulong_t)&adis16475_chip_info[ADIS16505_1] }, | |
| { "adis16505-2", (kernel_ulong_t)&adis16475_chip_info[ADIS16505_2] }, | |
| { "adis16505-3", (kernel_ulong_t)&adis16475_chip_info[ADIS16505_3] }, | |
| { "adis16507-1", (kernel_ulong_t)&adis16475_chip_info[ADIS16507_1] }, | |
| { "adis16507-2", (kernel_ulong_t)&adis16475_chip_info[ADIS16507_2] }, | |
| { "adis16507-3", (kernel_ulong_t)&adis16475_chip_info[ADIS16507_3] }, | |
| { "adis16575-2", (kernel_ulong_t)&adis16475_chip_info[ADIS16575_2] }, | |
| { "adis16575-3", (kernel_ulong_t)&adis16475_chip_info[ADIS16575_3] }, | |
| { "adis16576-2", (kernel_ulong_t)&adis16475_chip_info[ADIS16576_2] }, | |
| { "adis16576-3", (kernel_ulong_t)&adis16475_chip_info[ADIS16576_3] }, | |
| { "adis16577-2", (kernel_ulong_t)&adis16475_chip_info[ADIS16577_2] }, | |
| { "adis16577-3", (kernel_ulong_t)&adis16475_chip_info[ADIS16577_3] }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(spi, adis16475_ids); | |
| static struct spi_driver adis16475_driver = { | |
| .driver = { | |
| .name = "adis16475", | |
| .of_match_table = adis16475_of_match, | |
| }, | |
| .probe = adis16475_probe, | |
| .id_table = adis16475_ids, | |
| }; | |
| module_spi_driver(adis16475_driver); | |
| MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>"); | |
| MODULE_DESCRIPTION("Analog Devices ADIS16475 IMU driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_IMPORT_NS("IIO_ADISLIB"); |