| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * ADIS16550 IMU driver | |
| * | |
| * Copyright 2024 Analog Devices Inc. | |
| */ | |
| #include <linux/bitfield.h> | |
| #include <linux/bitops.h> | |
| #include <linux/clk.h> | |
| #include <linux/crc32.h> | |
| #include <linux/debugfs.h> | |
| #include <linux/iio/buffer.h> | |
| #include <linux/iio/iio.h> | |
| #include <linux/iio/imu/adis.h> | |
| #include <linux/iio/trigger_consumer.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kernel.h> | |
| #include <linux/lcm.h> | |
| #include <linux/math.h> | |
| #include <linux/module.h> | |
| #include <linux/mod_devicetable.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <linux/spi/spi.h> | |
| #include <linux/swab.h> | |
| #include <linux/unaligned.h> | |
| #define ADIS16550_REG_BURST_GYRO_ACCEL 0x0a | |
| #define ADIS16550_REG_BURST_DELTA_ANG_VEL 0x0b | |
| #define ADIS16550_BURST_DATA_GYRO_ACCEL_MASK GENMASK(6, 1) | |
| #define ADIS16550_BURST_DATA_DELTA_ANG_VEL_MASK GENMASK(12, 7) | |
| #define ADIS16550_REG_STATUS 0x0e | |
| #define ADIS16550_REG_TEMP 0x10 | |
| #define ADIS16550_REG_X_GYRO 0x12 | |
| #define ADIS16550_REG_Y_GYRO 0x14 | |
| #define ADIS16550_REG_Z_GYRO 0x16 | |
| #define ADIS16550_REG_X_ACCEL 0x18 | |
| #define ADIS16550_REG_Y_ACCEL 0x1a | |
| #define ADIS16550_REG_Z_ACCEL 0x1c | |
| #define ADIS16550_REG_X_DELTANG_L 0x1E | |
| #define ADIS16550_REG_Y_DELTANG_L 0x20 | |
| #define ADIS16550_REG_Z_DELTANG_L 0x22 | |
| #define ADIS16550_REG_X_DELTVEL_L 0x24 | |
| #define ADIS16550_REG_Y_DELTVEL_L 0x26 | |
| #define ADIS16550_REG_Z_DELTVEL_L 0x28 | |
| #define ADIS16550_REG_X_GYRO_SCALE 0x30 | |
| #define ADIS16550_REG_Y_GYRO_SCALE 0x32 | |
| #define ADIS16550_REG_Z_GYRO_SCALE 0x34 | |
| #define ADIS16550_REG_X_ACCEL_SCALE 0x36 | |
| #define ADIS16550_REG_Y_ACCEL_SCALE 0x38 | |
| #define ADIS16550_REG_Z_ACCEL_SCALE 0x3a | |
| #define ADIS16550_REG_X_GYRO_BIAS 0x40 | |
| #define ADIS16550_REG_Y_GYRO_BIAS 0x42 | |
| #define ADIS16550_REG_Z_GYRO_BIAS 0x44 | |
| #define ADIS16550_REG_X_ACCEL_BIAS 0x46 | |
| #define ADIS16550_REG_Y_ACCEL_BIAS 0x48 | |
| #define ADIS16550_REG_Z_ACCEL_BIAS 0x4a | |
| #define ADIS16550_REG_COMMAND 0x50 | |
| #define ADIS16550_REG_CONFIG 0x52 | |
| #define ADIS16550_GYRO_FIR_EN_MASK BIT(3) | |
| #define ADIS16550_ACCL_FIR_EN_MASK BIT(2) | |
| #define ADIS16550_SYNC_MASK \ | |
| (ADIS16550_SYNC_EN_MASK | ADIS16550_SYNC_MODE_MASK) | |
| #define ADIS16550_SYNC_MODE_MASK BIT(1) | |
| #define ADIS16550_SYNC_EN_MASK BIT(0) | |
| /* max of 4000 SPS in scale sync */ | |
| #define ADIS16550_SYNC_SCALE_MAX_RATE (4000 * 1000) | |
| #define ADIS16550_REG_DEC_RATE 0x54 | |
| #define ADIS16550_REG_SYNC_SCALE 0x56 | |
| #define ADIS16550_REG_SERIAL_NUM 0x76 | |
| #define ADIS16550_REG_FW_REV 0x7A | |
| #define ADIS16550_REG_FW_DATE 0x7C | |
| #define ADIS16550_REG_PROD_ID 0x7E | |
| #define ADIS16550_REG_FLASH_CNT 0x72 | |
| /* SPI protocol*/ | |
| #define ADIS16550_SPI_DATA_MASK GENMASK(31, 16) | |
| #define ADIS16550_SPI_REG_MASK GENMASK(14, 8) | |
| #define ADIS16550_SPI_R_W_MASK BIT(7) | |
| #define ADIS16550_SPI_CRC_MASK GENMASK(3, 0) | |
| #define ADIS16550_SPI_SV_MASK GENMASK(7, 6) | |
| /* burst read */ | |
| #define ADIS16550_BURST_N_ELEM 12 | |
| #define ADIS16550_BURST_DATA_LEN (ADIS16550_BURST_N_ELEM * 4) | |
| #define ADIS16550_MAX_SCAN_DATA 12 | |
| struct adis16550_sync { | |
| u16 sync_mode; | |
| u16 min_rate; | |
| u16 max_rate; | |
| }; | |
| struct adis16550_chip_info { | |
| const struct iio_chan_spec *channels; | |
| const struct adis16550_sync *sync_mode; | |
| char *name; | |
| u32 num_channels; | |
| u32 gyro_max_val; | |
| u32 gyro_max_scale; | |
| u32 accel_max_val; | |
| u32 accel_max_scale; | |
| u32 temp_scale; | |
| u32 deltang_max_val; | |
| u32 deltvel_max_val; | |
| u32 int_clk; | |
| u16 max_dec; | |
| u16 num_sync; | |
| }; | |
| struct adis16550 { | |
| const struct adis16550_chip_info *info; | |
| struct adis adis; | |
| unsigned long clk_freq_hz; | |
| u32 sync_mode; | |
| struct spi_transfer xfer[2]; | |
| u8 buffer[ADIS16550_BURST_DATA_LEN + sizeof(u32)] __aligned(IIO_DMA_MINALIGN); | |
| __be32 din[2]; | |
| __be32 dout[2]; | |
| }; | |
| enum { | |
| ADIS16550_SV_INIT, | |
| ADIS16550_SV_OK, | |
| ADIS16550_SV_NOK, | |
| ADIS16550_SV_SPI_ERROR, | |
| }; | |
| /* | |
| * This is a simplified implementation of lib/crc4.c. It could not be used | |
| * directly since the polynomial used is different from the one used by the | |
| * 16550 which is 0b10001 | |
| */ | |
| static u8 spi_crc4(const u32 val) | |
| { | |
| int i; | |
| const int bits = 28; | |
| u8 crc = 0xa; | |
| /* ignore 4lsb */ | |
| const u32 __val = val >> 4; | |
| /* Calculate crc4 over four-bit nibbles, starting at the MSbit */ | |
| for (i = bits - 4; i >= 0; i -= 4) | |
| crc = crc ^ ((__val >> i) & 0xf); | |
| return crc; | |
| } | |
| static int adis16550_spi_validate(const struct adis *adis, __be32 dout, | |
| u16 *data) | |
| { | |
| u32 __dout; | |
| u8 crc, crc_rcv, sv; | |
| __dout = be32_to_cpu(dout); | |
| /* validate received message */ | |
| crc_rcv = FIELD_GET(ADIS16550_SPI_CRC_MASK, __dout); | |
| crc = spi_crc4(__dout); | |
| if (crc_rcv != crc) { | |
| dev_err(&adis->spi->dev, | |
| "Invalid crc, rcv: 0x%02x, calc: 0x%02x!\n", | |
| crc_rcv, crc); | |
| return -EIO; | |
| } | |
| sv = FIELD_GET(ADIS16550_SPI_SV_MASK, __dout); | |
| if (sv >= ADIS16550_SV_NOK) { | |
| dev_err(&adis->spi->dev, | |
| "State vector error detected: %02X", sv); | |
| return -EIO; | |
| } | |
| *data = FIELD_GET(ADIS16550_SPI_DATA_MASK, __dout); | |
| return 0; | |
| } | |
| static void adis16550_spi_msg_prepare(const u32 reg, const bool write, | |
| const u16 data, __be32 *din) | |
| { | |
| u8 crc; | |
| u32 __din; | |
| __din = FIELD_PREP(ADIS16550_SPI_REG_MASK, reg); | |
| if (write) { | |
| __din |= FIELD_PREP(ADIS16550_SPI_R_W_MASK, 1); | |
| __din |= FIELD_PREP(ADIS16550_SPI_DATA_MASK, data); | |
| } | |
| crc = spi_crc4(__din); | |
| __din |= FIELD_PREP(ADIS16550_SPI_CRC_MASK, crc); | |
| *din = cpu_to_be32(__din); | |
| } | |
| static int adis16550_spi_xfer(const struct adis *adis, u32 reg, u32 len, | |
| u32 *readval, u32 writeval) | |
| { | |
| int ret; | |
| u16 data = 0; | |
| struct spi_message msg; | |
| bool wr = readval ? false : true; | |
| struct spi_device *spi = adis->spi; | |
| struct adis16550 *st = container_of(adis, struct adis16550, adis); | |
| struct spi_transfer xfers[] = { | |
| { | |
| .tx_buf = &st->din[0], | |
| .len = 4, | |
| .cs_change = 1, | |
| }, { | |
| .tx_buf = &st->din[1], | |
| .len = 4, | |
| .cs_change = 1, | |
| .rx_buf = st->dout, | |
| }, { | |
| .tx_buf = &st->din[1], | |
| .rx_buf = &st->dout[1], | |
| .len = 4, | |
| }, | |
| }; | |
| spi_message_init(&msg); | |
| switch (len) { | |
| case 4: | |
| adis16550_spi_msg_prepare(reg + 1, wr, writeval >> 16, | |
| &st->din[0]); | |
| spi_message_add_tail(&xfers[0], &msg); | |
| fallthrough; | |
| case 2: | |
| adis16550_spi_msg_prepare(reg, wr, writeval, &st->din[1]); | |
| spi_message_add_tail(&xfers[1], &msg); | |
| spi_message_add_tail(&xfers[2], &msg); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| ret = spi_sync(spi, &msg); | |
| if (ret) { | |
| dev_err(&spi->dev, "Spi failure %d\n", ret); | |
| return ret; | |
| } | |
| /* | |
| * When writing a register, the device will reply with a readback on the | |
| * transfer so that we can validate if our data was actually written.. | |
| */ | |
| switch (len) { | |
| case 4: | |
| ret = adis16550_spi_validate(adis, st->dout[0], &data); | |
| if (ret) | |
| return ret; | |
| if (readval) { | |
| *readval = data << 16; | |
| } else if ((writeval >> 16) != data && reg != ADIS16550_REG_COMMAND) { | |
| dev_err(&spi->dev, | |
| "Data not written: wr: 0x%04X, rcv: 0x%04X\n", | |
| writeval >> 16, data); | |
| return -EIO; | |
| } | |
| fallthrough; | |
| case 2: | |
| ret = adis16550_spi_validate(adis, st->dout[1], &data); | |
| if (ret) | |
| return ret; | |
| if (readval) { | |
| *readval = (*readval & GENMASK(31, 16)) | data; | |
| } else if ((writeval & GENMASK(15, 0)) != data && reg != ADIS16550_REG_COMMAND) { | |
| dev_err(&spi->dev, | |
| "Data not written: wr: 0x%04X, rcv: 0x%04X\n", | |
| (u16)writeval, data); | |
| return -EIO; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int adis16550_spi_read(struct adis *adis, const u32 reg, | |
| u32 *value, const u32 len) | |
| { | |
| return adis16550_spi_xfer(adis, reg, len, value, 0); | |
| } | |
| static int adis16550_spi_write(struct adis *adis, const u32 reg, | |
| const u32 value, const u32 len) | |
| { | |
| return adis16550_spi_xfer(adis, reg, len, NULL, value); | |
| } | |
| static ssize_t adis16550_show_firmware_revision(struct file *file, | |
| char __user *userbuf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct adis16550 *st = file->private_data; | |
| char buf[7]; | |
| size_t len; | |
| u16 rev; | |
| int ret; | |
| ret = adis_read_reg_16(&st->adis, ADIS16550_REG_FW_REV, &rev); | |
| if (ret) | |
| return ret; | |
| len = scnprintf(buf, sizeof(buf), "%x.%x\n", rev >> 8, rev & 0xff); | |
| return simple_read_from_buffer(userbuf, count, ppos, buf, len); | |
| } | |
| static const struct file_operations adis16550_firmware_revision_fops = { | |
| .open = simple_open, | |
| .read = adis16550_show_firmware_revision, | |
| .llseek = default_llseek, | |
| .owner = THIS_MODULE, | |
| }; | |
| static ssize_t adis16550_show_firmware_date(struct file *file, | |
| char __user *userbuf, | |
| size_t count, loff_t *ppos) | |
| { | |
| struct adis16550 *st = file->private_data; | |
| char buf[12]; | |
| size_t len; | |
| u32 date; | |
| int ret; | |
| ret = adis_read_reg_32(&st->adis, ADIS16550_REG_FW_DATE, &date); | |
| if (ret) | |
| return ret; | |
| len = scnprintf(buf, sizeof(buf), "%.2x-%.2x-%.4x\n", date & 0xff, | |
| (date >> 8) & 0xff, date >> 16); | |
| return simple_read_from_buffer(userbuf, count, ppos, buf, len); | |
| } | |
| static const struct file_operations adis16550_firmware_date_fops = { | |
| .open = simple_open, | |
| .read = adis16550_show_firmware_date, | |
| .llseek = default_llseek, | |
| .owner = THIS_MODULE, | |
| }; | |
| static int adis16550_show_serial_number(void *arg, u64 *val) | |
| { | |
| struct adis16550 *st = arg; | |
| u32 serial; | |
| int ret; | |
| ret = adis_read_reg_32(&st->adis, ADIS16550_REG_SERIAL_NUM, &serial); | |
| if (ret) | |
| return ret; | |
| *val = serial; | |
| return 0; | |
| } | |
| DEFINE_DEBUGFS_ATTRIBUTE(adis16550_serial_number_fops, | |
| adis16550_show_serial_number, NULL, "0x%.8llx\n"); | |
| static int adis16550_show_product_id(void *arg, u64 *val) | |
| { | |
| struct adis16550 *st = arg; | |
| u16 prod_id; | |
| int ret; | |
| ret = adis_read_reg_16(&st->adis, ADIS16550_REG_PROD_ID, &prod_id); | |
| if (ret) | |
| return ret; | |
| *val = prod_id; | |
| return 0; | |
| } | |
| DEFINE_DEBUGFS_ATTRIBUTE(adis16550_product_id_fops, | |
| adis16550_show_product_id, NULL, "%llu\n"); | |
| static int adis16550_show_flash_count(void *arg, u64 *val) | |
| { | |
| struct adis16550 *st = arg; | |
| u16 flash_count; | |
| int ret; | |
| ret = adis_read_reg_16(&st->adis, ADIS16550_REG_FLASH_CNT, &flash_count); | |
| if (ret) | |
| return ret; | |
| *val = flash_count; | |
| return 0; | |
| } | |
| DEFINE_DEBUGFS_ATTRIBUTE(adis16550_flash_count_fops, | |
| adis16550_show_flash_count, NULL, "%lld\n"); | |
| static void adis16550_debugfs_init(struct iio_dev *indio_dev) | |
| { | |
| struct adis16550 *st = iio_priv(indio_dev); | |
| struct dentry *d = iio_get_debugfs_dentry(indio_dev); | |
| debugfs_create_file_unsafe("serial_number", 0400, d, st, | |
| &adis16550_serial_number_fops); | |
| debugfs_create_file_unsafe("product_id", 0400, d, st, | |
| &adis16550_product_id_fops); | |
| debugfs_create_file("firmware_revision", 0400, d, st, | |
| &adis16550_firmware_revision_fops); | |
| debugfs_create_file("firmware_date", 0400, d, st, | |
| &adis16550_firmware_date_fops); | |
| debugfs_create_file_unsafe("flash_count", 0400, d, st, | |
| &adis16550_flash_count_fops); | |
| } | |
| enum { | |
| ADIS16550_SYNC_MODE_DIRECT, | |
| ADIS16550_SYNC_MODE_SCALED, | |
| }; | |
| static int adis16550_get_freq(struct adis16550 *st, u32 *freq) | |
| { | |
| int ret; | |
| u16 dec = 0; | |
| u32 sample_rate = st->clk_freq_hz; | |
| adis_dev_auto_lock(&st->adis); | |
| if (st->sync_mode == ADIS16550_SYNC_MODE_SCALED) { | |
| u16 sync_scale; | |
| ret = __adis_read_reg_16(&st->adis, ADIS16550_REG_SYNC_SCALE, &sync_scale); | |
| if (ret) | |
| return ret; | |
| sample_rate = st->clk_freq_hz * sync_scale; | |
| } | |
| ret = __adis_read_reg_16(&st->adis, ADIS16550_REG_DEC_RATE, &dec); | |
| if (ret) | |
| return -EINVAL; | |
| *freq = DIV_ROUND_CLOSEST(sample_rate, dec + 1); | |
| return 0; | |
| } | |
| static int adis16550_set_freq_hz(struct adis16550 *st, u32 freq_hz) | |
| { | |
| u16 dec; | |
| int ret; | |
| u32 sample_rate = st->clk_freq_hz; | |
| /* | |
| * The optimal sample rate for the supported IMUs is between | |
| * int_clk - 1000 and int_clk + 500. | |
| */ | |
| u32 max_sample_rate = st->info->int_clk * 1000 + 500000; | |
| u32 min_sample_rate = st->info->int_clk * 1000 - 1000000; | |
| if (!freq_hz) | |
| return -EINVAL; | |
| adis_dev_auto_lock(&st->adis); | |
| if (st->sync_mode == ADIS16550_SYNC_MODE_SCALED) { | |
| unsigned long scaled_rate = lcm(st->clk_freq_hz, freq_hz); | |
| int sync_scale; | |
| if (scaled_rate > max_sample_rate) | |
| scaled_rate = max_sample_rate / st->clk_freq_hz * st->clk_freq_hz; | |
| else | |
| scaled_rate = max_sample_rate / scaled_rate * scaled_rate; | |
| if (scaled_rate < min_sample_rate) | |
| scaled_rate = roundup(min_sample_rate, st->clk_freq_hz); | |
| sync_scale = scaled_rate / st->clk_freq_hz; | |
| ret = __adis_write_reg_16(&st->adis, ADIS16550_REG_SYNC_SCALE, | |
| sync_scale); | |
| if (ret) | |
| return ret; | |
| sample_rate = scaled_rate; | |
| } | |
| dec = DIV_ROUND_CLOSEST(sample_rate, freq_hz); | |
| if (dec) | |
| dec--; | |
| dec = min(dec, st->info->max_dec); | |
| return __adis_write_reg_16(&st->adis, ADIS16550_REG_DEC_RATE, dec); | |
| } | |
| static int adis16550_get_accl_filter_freq(struct adis16550 *st, int *freq_hz) | |
| { | |
| int ret; | |
| u16 config = 0; | |
| ret = adis_read_reg_16(&st->adis, ADIS16550_REG_CONFIG, &config); | |
| if (ret) | |
| return -EINVAL; | |
| if (FIELD_GET(ADIS16550_ACCL_FIR_EN_MASK, config)) | |
| *freq_hz = 100; | |
| else | |
| *freq_hz = 0; | |
| return 0; | |
| } | |
| static int adis16550_set_accl_filter_freq(struct adis16550 *st, int freq_hz) | |
| { | |
| u8 en = freq_hz ? 1 : 0; | |
| u16 val = FIELD_PREP(ADIS16550_ACCL_FIR_EN_MASK, en); | |
| return __adis_update_bits(&st->adis, ADIS16550_REG_CONFIG, | |
| ADIS16550_ACCL_FIR_EN_MASK, val); | |
| } | |
| static int adis16550_get_gyro_filter_freq(struct adis16550 *st, int *freq_hz) | |
| { | |
| int ret; | |
| u16 config = 0; | |
| ret = adis_read_reg_16(&st->adis, ADIS16550_REG_CONFIG, &config); | |
| if (ret) | |
| return -EINVAL; | |
| if (FIELD_GET(ADIS16550_GYRO_FIR_EN_MASK, config)) | |
| *freq_hz = 100; | |
| else | |
| *freq_hz = 0; | |
| return 0; | |
| } | |
| static int adis16550_set_gyro_filter_freq(struct adis16550 *st, int freq_hz) | |
| { | |
| u8 en = freq_hz ? 1 : 0; | |
| u16 val = FIELD_PREP(ADIS16550_GYRO_FIR_EN_MASK, en); | |
| return __adis_update_bits(&st->adis, ADIS16550_REG_CONFIG, | |
| ADIS16550_GYRO_FIR_EN_MASK, val); | |
| } | |
| enum { | |
| ADIS16550_SCAN_TEMP, | |
| ADIS16550_SCAN_GYRO_X, | |
| ADIS16550_SCAN_GYRO_Y, | |
| ADIS16550_SCAN_GYRO_Z, | |
| ADIS16550_SCAN_ACCEL_X, | |
| ADIS16550_SCAN_ACCEL_Y, | |
| ADIS16550_SCAN_ACCEL_Z, | |
| ADIS16550_SCAN_DELTANG_X, | |
| ADIS16550_SCAN_DELTANG_Y, | |
| ADIS16550_SCAN_DELTANG_Z, | |
| ADIS16550_SCAN_DELTVEL_X, | |
| ADIS16550_SCAN_DELTVEL_Y, | |
| ADIS16550_SCAN_DELTVEL_Z, | |
| }; | |
| static const u32 adis16550_calib_bias[] = { | |
| [ADIS16550_SCAN_GYRO_X] = ADIS16550_REG_X_GYRO_BIAS, | |
| [ADIS16550_SCAN_GYRO_Y] = ADIS16550_REG_Y_GYRO_BIAS, | |
| [ADIS16550_SCAN_GYRO_Z] = ADIS16550_REG_Z_GYRO_BIAS, | |
| [ADIS16550_SCAN_ACCEL_X] = ADIS16550_REG_X_ACCEL_BIAS, | |
| [ADIS16550_SCAN_ACCEL_Y] = ADIS16550_REG_Y_ACCEL_BIAS, | |
| [ADIS16550_SCAN_ACCEL_Z] = ADIS16550_REG_Z_ACCEL_BIAS, | |
| }; | |
| static const u32 adis16550_calib_scale[] = { | |
| [ADIS16550_SCAN_GYRO_X] = ADIS16550_REG_X_GYRO_SCALE, | |
| [ADIS16550_SCAN_GYRO_Y] = ADIS16550_REG_Y_GYRO_SCALE, | |
| [ADIS16550_SCAN_GYRO_Z] = ADIS16550_REG_Z_GYRO_SCALE, | |
| [ADIS16550_SCAN_ACCEL_X] = ADIS16550_REG_X_ACCEL_SCALE, | |
| [ADIS16550_SCAN_ACCEL_Y] = ADIS16550_REG_Y_ACCEL_SCALE, | |
| [ADIS16550_SCAN_ACCEL_Z] = ADIS16550_REG_Z_ACCEL_SCALE, | |
| }; | |
| static int adis16550_read_raw(struct iio_dev *indio_dev, | |
| const struct iio_chan_spec *chan, | |
| int *val, int *val2, long info) | |
| { | |
| struct adis16550 *st = iio_priv(indio_dev); | |
| const int idx = chan->scan_index; | |
| u16 scale; | |
| int ret; | |
| u32 tmp; | |
| switch (info) { | |
| case IIO_CHAN_INFO_RAW: | |
| return adis_single_conversion(indio_dev, chan, 0, val); | |
| case IIO_CHAN_INFO_SCALE: | |
| switch (chan->type) { | |
| case IIO_ANGL_VEL: | |
| *val = st->info->gyro_max_val; | |
| *val2 = st->info->gyro_max_scale; | |
| return IIO_VAL_FRACTIONAL; | |
| case IIO_ACCEL: | |
| *val = st->info->accel_max_val; | |
| *val2 = st->info->accel_max_scale; | |
| return IIO_VAL_FRACTIONAL; | |
| case IIO_TEMP: | |
| *val = st->info->temp_scale; | |
| return IIO_VAL_INT; | |
| case IIO_DELTA_ANGL: | |
| *val = st->info->deltang_max_val; | |
| *val2 = 31; | |
| return IIO_VAL_FRACTIONAL_LOG2; | |
| case IIO_DELTA_VELOCITY: | |
| *val = st->info->deltvel_max_val; | |
| *val2 = 31; | |
| return IIO_VAL_FRACTIONAL_LOG2; | |
| default: | |
| return -EINVAL; | |
| } | |
| case IIO_CHAN_INFO_OFFSET: | |
| /* temperature centered at 25°C */ | |
| *val = DIV_ROUND_CLOSEST(25000, st->info->temp_scale); | |
| return IIO_VAL_INT; | |
| case IIO_CHAN_INFO_CALIBBIAS: | |
| ret = adis_read_reg_32(&st->adis, | |
| adis16550_calib_bias[idx], val); | |
| if (ret) | |
| return ret; | |
| return IIO_VAL_INT; | |
| case IIO_CHAN_INFO_CALIBSCALE: | |
| ret = adis_read_reg_16(&st->adis, | |
| adis16550_calib_scale[idx], &scale); | |
| if (ret) | |
| return ret; | |
| *val = scale; | |
| return IIO_VAL_INT; | |
| case IIO_CHAN_INFO_SAMP_FREQ: | |
| ret = adis16550_get_freq(st, &tmp); | |
| if (ret) | |
| return ret; | |
| *val = tmp / 1000; | |
| *val2 = (tmp % 1000) * 1000; | |
| return IIO_VAL_INT_PLUS_MICRO; | |
| case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: | |
| switch (chan->type) { | |
| case IIO_ANGL_VEL: | |
| ret = adis16550_get_gyro_filter_freq(st, val); | |
| if (ret) | |
| return ret; | |
| return IIO_VAL_INT; | |
| case IIO_ACCEL: | |
| ret = adis16550_get_accl_filter_freq(st, val); | |
| if (ret) | |
| return ret; | |
| return IIO_VAL_INT; | |
| default: | |
| return -EINVAL; | |
| } | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static int adis16550_write_raw(struct iio_dev *indio_dev, | |
| const struct iio_chan_spec *chan, | |
| int val, int val2, long info) | |
| { | |
| struct adis16550 *st = iio_priv(indio_dev); | |
| const int idx = chan->scan_index; | |
| u32 tmp; | |
| switch (info) { | |
| case IIO_CHAN_INFO_SAMP_FREQ: | |
| tmp = val * 1000 + val2 / 1000; | |
| return adis16550_set_freq_hz(st, tmp); | |
| case IIO_CHAN_INFO_CALIBBIAS: | |
| return adis_write_reg_32(&st->adis, adis16550_calib_bias[idx], | |
| val); | |
| case IIO_CHAN_INFO_CALIBSCALE: | |
| return adis_write_reg_16(&st->adis, adis16550_calib_scale[idx], | |
| val); | |
| case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: | |
| switch (chan->type) { | |
| case IIO_ANGL_VEL: | |
| return adis16550_set_gyro_filter_freq(st, val); | |
| case IIO_ACCEL: | |
| return adis16550_set_accl_filter_freq(st, val); | |
| default: | |
| return -EINVAL; | |
| } | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| #define ADIS16550_MOD_CHAN(_type, _mod, _address, _si) \ | |
| { \ | |
| .type = (_type), \ | |
| .modified = 1, \ | |
| .channel2 = (_mod), \ | |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ | |
| BIT(IIO_CHAN_INFO_CALIBBIAS) | \ | |
| BIT(IIO_CHAN_INFO_CALIBSCALE), \ | |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ | |
| BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \ | |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ | |
| .address = (_address), \ | |
| .scan_index = (_si), \ | |
| .scan_type = { \ | |
| .sign = 's', \ | |
| .realbits = 32, \ | |
| .storagebits = 32, \ | |
| .endianness = IIO_BE, \ | |
| }, \ | |
| } | |
| #define ADIS16550_GYRO_CHANNEL(_mod) \ | |
| ADIS16550_MOD_CHAN(IIO_ANGL_VEL, IIO_MOD_ ## _mod, \ | |
| ADIS16550_REG_ ## _mod ## _GYRO, ADIS16550_SCAN_GYRO_ ## _mod) | |
| #define ADIS16550_ACCEL_CHANNEL(_mod) \ | |
| ADIS16550_MOD_CHAN(IIO_ACCEL, IIO_MOD_ ## _mod, \ | |
| ADIS16550_REG_ ## _mod ## _ACCEL, ADIS16550_SCAN_ACCEL_ ## _mod) | |
| #define ADIS16550_TEMP_CHANNEL() { \ | |
| .type = IIO_TEMP, \ | |
| .indexed = 1, \ | |
| .channel = 0, \ | |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ | |
| BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_OFFSET), \ | |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ | |
| .address = ADIS16550_REG_TEMP, \ | |
| .scan_index = ADIS16550_SCAN_TEMP, \ | |
| .scan_type = { \ | |
| .sign = 's', \ | |
| .realbits = 16, \ | |
| .storagebits = 32, \ | |
| .endianness = IIO_BE, \ | |
| }, \ | |
| } | |
| #define ADIS16550_MOD_CHAN_DELTA(_type, _mod, _address, _si) { \ | |
| .type = (_type), \ | |
| .modified = 1, \ | |
| .channel2 = (_mod), \ | |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ | |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ | |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ | |
| .address = (_address), \ | |
| .scan_index = _si, \ | |
| .scan_type = { \ | |
| .sign = 's', \ | |
| .realbits = 32, \ | |
| .storagebits = 32, \ | |
| .endianness = IIO_BE, \ | |
| }, \ | |
| } | |
| #define ADIS16550_DELTANG_CHAN(_mod) \ | |
| ADIS16550_MOD_CHAN_DELTA(IIO_DELTA_ANGL, IIO_MOD_ ## _mod, \ | |
| ADIS16550_REG_ ## _mod ## _DELTANG_L, ADIS16550_SCAN_DELTANG_ ## _mod) | |
| #define ADIS16550_DELTVEL_CHAN(_mod) \ | |
| ADIS16550_MOD_CHAN_DELTA(IIO_DELTA_VELOCITY, IIO_MOD_ ## _mod, \ | |
| ADIS16550_REG_ ## _mod ## _DELTVEL_L, ADIS16550_SCAN_DELTVEL_ ## _mod) | |
| #define ADIS16550_DELTANG_CHAN_NO_SCAN(_mod) \ | |
| ADIS16550_MOD_CHAN_DELTA(IIO_DELTA_ANGL, IIO_MOD_ ## _mod, \ | |
| ADIS16550_REG_ ## _mod ## _DELTANG_L, -1) | |
| #define ADIS16550_DELTVEL_CHAN_NO_SCAN(_mod) \ | |
| ADIS16550_MOD_CHAN_DELTA(IIO_DELTA_VELOCITY, IIO_MOD_ ## _mod, \ | |
| ADIS16550_REG_ ## _mod ## _DELTVEL_L, -1) | |
| static const struct iio_chan_spec adis16550_channels[] = { | |
| ADIS16550_TEMP_CHANNEL(), | |
| ADIS16550_GYRO_CHANNEL(X), | |
| ADIS16550_GYRO_CHANNEL(Y), | |
| ADIS16550_GYRO_CHANNEL(Z), | |
| ADIS16550_ACCEL_CHANNEL(X), | |
| ADIS16550_ACCEL_CHANNEL(Y), | |
| ADIS16550_ACCEL_CHANNEL(Z), | |
| ADIS16550_DELTANG_CHAN(X), | |
| ADIS16550_DELTANG_CHAN(Y), | |
| ADIS16550_DELTANG_CHAN(Z), | |
| ADIS16550_DELTVEL_CHAN(X), | |
| ADIS16550_DELTVEL_CHAN(Y), | |
| ADIS16550_DELTVEL_CHAN(Z), | |
| IIO_CHAN_SOFT_TIMESTAMP(13), | |
| }; | |
| static const struct adis16550_sync adis16550_sync_modes[] = { | |
| { ADIS16550_SYNC_MODE_DIRECT, 3000, 4500 }, | |
| { ADIS16550_SYNC_MODE_SCALED, 1, 128 }, | |
| }; | |
| static const struct adis16550_chip_info adis16550_chip_info = { | |
| .num_channels = ARRAY_SIZE(adis16550_channels), | |
| .channels = adis16550_channels, | |
| .name = "adis16550", | |
| .gyro_max_val = 1, | |
| .gyro_max_scale = IIO_RAD_TO_DEGREE(80 << 16), | |
| .accel_max_val = 1, | |
| .accel_max_scale = IIO_M_S_2_TO_G(102400000), | |
| .temp_scale = 4, | |
| .deltang_max_val = IIO_DEGREE_TO_RAD(720), | |
| .deltvel_max_val = 125, | |
| .int_clk = 4000, | |
| .max_dec = 4095, | |
| .sync_mode = adis16550_sync_modes, | |
| .num_sync = ARRAY_SIZE(adis16550_sync_modes), | |
| }; | |
| static u32 adis16550_validate_crc(__be32 *buffer, const u8 n_elem) | |
| { | |
| int i; | |
| u32 crc_calc; | |
| u32 crc_buf[ADIS16550_BURST_N_ELEM - 2]; | |
| u32 crc = be32_to_cpu(buffer[ADIS16550_BURST_N_ELEM - 1]); | |
| /* | |
| * The crc calculation of the data is done in little endian. Hence, we | |
| * always swap the 32bit elements making sure that the data LSB is | |
| * always on address 0... | |
| */ | |
| for (i = 0; i < n_elem; i++) | |
| crc_buf[i] = be32_to_cpu(buffer[i]); | |
| crc_calc = crc32(~0, crc_buf, n_elem * 4); | |
| crc_calc ^= ~0; | |
| return (crc_calc == crc); | |
| } | |
| static irqreturn_t adis16550_trigger_handler(int irq, void *p) | |
| { | |
| int ret; | |
| u16 dummy; | |
| bool valid; | |
| struct iio_poll_func *pf = p; | |
| __be32 data[ADIS16550_MAX_SCAN_DATA] __aligned(8); | |
| struct iio_dev *indio_dev = pf->indio_dev; | |
| struct adis16550 *st = iio_priv(indio_dev); | |
| struct adis *adis = iio_device_get_drvdata(indio_dev); | |
| __be32 *buffer = (__be32 *)st->buffer; | |
| ret = spi_sync(adis->spi, &adis->msg); | |
| if (ret) | |
| goto done; | |
| /* | |
| * Validate the header. The header is a normal spi reply with state | |
| * vector and crc4. | |
| */ | |
| ret = adis16550_spi_validate(&st->adis, buffer[0], &dummy); | |
| if (ret) | |
| goto done; | |
| /* the header is not included in the crc */ | |
| valid = adis16550_validate_crc(buffer, ADIS16550_BURST_N_ELEM - 2); | |
| if (!valid) { | |
| dev_err(&adis->spi->dev, "Burst Invalid crc!\n"); | |
| goto done; | |
| } | |
| /* copy the temperature together with sensor data */ | |
| memcpy(data, &buffer[3], | |
| (ADIS16550_SCAN_ACCEL_Z - ADIS16550_SCAN_GYRO_X + 2) * | |
| sizeof(__be32)); | |
| iio_push_to_buffers_with_timestamp(indio_dev, data, pf->timestamp); | |
| done: | |
| iio_trigger_notify_done(indio_dev->trig); | |
| return IRQ_HANDLED; | |
| } | |
| static const unsigned long adis16550_channel_masks[] = { | |
| ADIS16550_BURST_DATA_GYRO_ACCEL_MASK | BIT(ADIS16550_SCAN_TEMP), | |
| ADIS16550_BURST_DATA_DELTA_ANG_VEL_MASK | BIT(ADIS16550_SCAN_TEMP), | |
| 0 | |
| }; | |
| static int adis16550_update_scan_mode(struct iio_dev *indio_dev, | |
| const unsigned long *scan_mask) | |
| { | |
| u16 burst_length = ADIS16550_BURST_DATA_LEN; | |
| struct adis16550 *st = iio_priv(indio_dev); | |
| u8 burst_cmd; | |
| u8 *tx; | |
| memset(st->buffer, 0, burst_length + sizeof(u32)); | |
| if (*scan_mask & ADIS16550_BURST_DATA_GYRO_ACCEL_MASK) | |
| burst_cmd = ADIS16550_REG_BURST_GYRO_ACCEL; | |
| else | |
| burst_cmd = ADIS16550_REG_BURST_DELTA_ANG_VEL; | |
| tx = st->buffer + burst_length; | |
| tx[0] = 0x00; | |
| tx[1] = 0x00; | |
| tx[2] = burst_cmd; | |
| /* crc4 is 0 on burst command */ | |
| tx[3] = spi_crc4(get_unaligned_le32(tx)); | |
| return 0; | |
| } | |
| static int adis16550_reset(struct adis *adis) | |
| { | |
| return __adis_write_reg_16(adis, ADIS16550_REG_COMMAND, BIT(15)); | |
| } | |
| static int adis16550_config_sync(struct adis16550 *st) | |
| { | |
| struct device *dev = &st->adis.spi->dev; | |
| const struct adis16550_sync *sync_mode_data; | |
| struct clk *clk; | |
| int ret, i; | |
| u16 mode; | |
| clk = devm_clk_get_optional_enabled(dev, NULL); | |
| if (IS_ERR(clk)) | |
| return PTR_ERR(clk); | |
| if (!clk) { | |
| st->clk_freq_hz = st->info->int_clk * 1000; | |
| return 0; | |
| } | |
| st->clk_freq_hz = clk_get_rate(clk); | |
| for (i = 0; i < st->info->num_sync; i++) { | |
| if (st->clk_freq_hz >= st->info->sync_mode[i].min_rate && | |
| st->clk_freq_hz <= st->info->sync_mode[i].max_rate) { | |
| sync_mode_data = &st->info->sync_mode[i]; | |
| break; | |
| } | |
| } | |
| if (i == st->info->num_sync) | |
| return dev_err_probe(dev, -EINVAL, "Clk rate: %lu not in a valid range", | |
| st->clk_freq_hz); | |
| if (sync_mode_data->sync_mode == ADIS16550_SYNC_MODE_SCALED) { | |
| u16 sync_scale; | |
| /* | |
| * In sps scaled sync we must scale the input clock to a range | |
| * of [3000 4500]. | |
| */ | |
| sync_scale = DIV_ROUND_CLOSEST(st->info->int_clk, st->clk_freq_hz); | |
| if (3000 > sync_scale || 4500 < sync_scale) | |
| return dev_err_probe(dev, -EINVAL, | |
| "Invalid value:%u for sync_scale", | |
| sync_scale); | |
| ret = adis_write_reg_16(&st->adis, ADIS16550_REG_SYNC_SCALE, | |
| sync_scale); | |
| if (ret) | |
| return ret; | |
| st->clk_freq_hz = st->info->int_clk; | |
| } | |
| st->clk_freq_hz *= 1000; | |
| mode = FIELD_PREP(ADIS16550_SYNC_MODE_MASK, sync_mode_data->sync_mode) | | |
| FIELD_PREP(ADIS16550_SYNC_EN_MASK, true); | |
| return __adis_update_bits(&st->adis, ADIS16550_REG_CONFIG, | |
| ADIS16550_SYNC_MASK, mode); | |
| } | |
| static const struct iio_info adis16550_info = { | |
| .read_raw = &adis16550_read_raw, | |
| .write_raw = &adis16550_write_raw, | |
| .update_scan_mode = adis16550_update_scan_mode, | |
| .debugfs_reg_access = adis_debugfs_reg_access, | |
| }; | |
| enum { | |
| ADIS16550_STATUS_CRC_CODE, | |
| ADIS16550_STATUS_CRC_CONFIG, | |
| ADIS16550_STATUS_FLASH_UPDATE, | |
| ADIS16550_STATUS_INERIAL, | |
| ADIS16550_STATUS_SENSOR, | |
| ADIS16550_STATUS_TEMPERATURE, | |
| ADIS16550_STATUS_SPI, | |
| ADIS16550_STATUS_PROCESSING, | |
| ADIS16550_STATUS_POWER, | |
| ADIS16550_STATUS_BOOT, | |
| ADIS16550_STATUS_WATCHDOG = 15, | |
| ADIS16550_STATUS_REGULATOR = 28, | |
| ADIS16550_STATUS_SENSOR_SUPPLY, | |
| ADIS16550_STATUS_CPU_SUPPLY, | |
| ADIS16550_STATUS_5V_SUPPLY, | |
| }; | |
| static const char * const adis16550_status_error_msgs[] = { | |
| [ADIS16550_STATUS_CRC_CODE] = "Code CRC Error", | |
| [ADIS16550_STATUS_CRC_CONFIG] = "Configuration/Calibration CRC Error", | |
| [ADIS16550_STATUS_FLASH_UPDATE] = "Flash Update Error", | |
| [ADIS16550_STATUS_INERIAL] = "Overrange for Inertial Signals", | |
| [ADIS16550_STATUS_SENSOR] = "Sensor failure", | |
| [ADIS16550_STATUS_TEMPERATURE] = "Temperature Error", | |
| [ADIS16550_STATUS_SPI] = "SPI Communication Error", | |
| [ADIS16550_STATUS_PROCESSING] = "Processing Overrun Error", | |
| [ADIS16550_STATUS_POWER] = "Power Supply Failure", | |
| [ADIS16550_STATUS_BOOT] = "Boot Memory Failure", | |
| [ADIS16550_STATUS_WATCHDOG] = "Watchdog timer flag", | |
| [ADIS16550_STATUS_REGULATOR] = "Internal Regulator Error", | |
| [ADIS16550_STATUS_SENSOR_SUPPLY] = "Internal Sensor Supply Error.", | |
| [ADIS16550_STATUS_CPU_SUPPLY] = "Internal Processor Supply Error.", | |
| [ADIS16550_STATUS_5V_SUPPLY] = "External 5V Supply Error", | |
| }; | |
| static const struct adis_timeout adis16550_timeouts = { | |
| .reset_ms = 1000, | |
| .sw_reset_ms = 1000, | |
| .self_test_ms = 1000, | |
| }; | |
| static const struct adis_data adis16550_data = { | |
| .diag_stat_reg = ADIS16550_REG_STATUS, | |
| .diag_stat_size = 4, | |
| .prod_id_reg = ADIS16550_REG_PROD_ID, | |
| .prod_id = 16550, | |
| .self_test_mask = BIT(1), | |
| .self_test_reg = ADIS16550_REG_COMMAND, | |
| .cs_change_delay = 5, | |
| .unmasked_drdy = true, | |
| .status_error_msgs = adis16550_status_error_msgs, | |
| .status_error_mask = BIT(ADIS16550_STATUS_CRC_CODE) | | |
| BIT(ADIS16550_STATUS_CRC_CONFIG) | | |
| BIT(ADIS16550_STATUS_FLASH_UPDATE) | | |
| BIT(ADIS16550_STATUS_INERIAL) | | |
| BIT(ADIS16550_STATUS_SENSOR) | | |
| BIT(ADIS16550_STATUS_TEMPERATURE) | | |
| BIT(ADIS16550_STATUS_SPI) | | |
| BIT(ADIS16550_STATUS_PROCESSING) | | |
| BIT(ADIS16550_STATUS_POWER) | | |
| BIT(ADIS16550_STATUS_BOOT) | | |
| BIT(ADIS16550_STATUS_WATCHDOG) | | |
| BIT(ADIS16550_STATUS_REGULATOR) | | |
| BIT(ADIS16550_STATUS_SENSOR_SUPPLY) | | |
| BIT(ADIS16550_STATUS_CPU_SUPPLY) | | |
| BIT(ADIS16550_STATUS_5V_SUPPLY), | |
| .timeouts = &adis16550_timeouts, | |
| }; | |
| static const struct adis_ops adis16550_ops = { | |
| .write = adis16550_spi_write, | |
| .read = adis16550_spi_read, | |
| .reset = adis16550_reset, | |
| }; | |
| static int adis16550_probe(struct spi_device *spi) | |
| { | |
| u16 burst_length = ADIS16550_BURST_DATA_LEN; | |
| struct device *dev = &spi->dev; | |
| struct iio_dev *indio_dev; | |
| struct adis16550 *st; | |
| struct adis *adis; | |
| int ret; | |
| indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); | |
| if (!indio_dev) | |
| return -ENOMEM; | |
| st = iio_priv(indio_dev); | |
| st->info = spi_get_device_match_data(spi); | |
| if (!st->info) | |
| return -EINVAL; | |
| adis = &st->adis; | |
| indio_dev->name = st->info->name; | |
| indio_dev->channels = st->info->channels; | |
| indio_dev->num_channels = st->info->num_channels; | |
| indio_dev->available_scan_masks = adis16550_channel_masks; | |
| indio_dev->info = &adis16550_info; | |
| indio_dev->modes = INDIO_DIRECT_MODE; | |
| st->adis.ops = &adis16550_ops; | |
| st->xfer[0].tx_buf = st->buffer + burst_length; | |
| st->xfer[0].len = 4; | |
| st->xfer[0].cs_change = 1; | |
| st->xfer[0].delay.value = 8; | |
| st->xfer[0].delay.unit = SPI_DELAY_UNIT_USECS; | |
| st->xfer[1].rx_buf = st->buffer; | |
| st->xfer[1].len = burst_length; | |
| spi_message_init_with_transfers(&adis->msg, st->xfer, 2); | |
| ret = devm_regulator_get_enable(dev, "vdd"); | |
| if (ret) | |
| return dev_err_probe(dev, ret, "Failed to get vdd regulator\n"); | |
| ret = adis_init(&st->adis, indio_dev, spi, &adis16550_data); | |
| if (ret) | |
| return ret; | |
| ret = __adis_initial_startup(&st->adis); | |
| if (ret) | |
| return ret; | |
| ret = adis16550_config_sync(st); | |
| if (ret) | |
| return ret; | |
| ret = devm_adis_setup_buffer_and_trigger(&st->adis, indio_dev, | |
| adis16550_trigger_handler); | |
| if (ret) | |
| return ret; | |
| ret = devm_iio_device_register(dev, indio_dev); | |
| if (ret) | |
| return ret; | |
| adis16550_debugfs_init(indio_dev); | |
| return 0; | |
| } | |
| static const struct spi_device_id adis16550_id[] = { | |
| { "adis16550", (kernel_ulong_t)&adis16550_chip_info}, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(spi, adis16550_id); | |
| static const struct of_device_id adis16550_of_match[] = { | |
| { .compatible = "adi,adis16550", .data = &adis16550_chip_info }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, adis16550_of_match); | |
| static struct spi_driver adis16550_driver = { | |
| .driver = { | |
| .name = "adis16550", | |
| .of_match_table = adis16550_of_match, | |
| }, | |
| .probe = adis16550_probe, | |
| .id_table = adis16550_id, | |
| }; | |
| module_spi_driver(adis16550_driver); | |
| MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>"); | |
| MODULE_AUTHOR("Ramona Gradinariu <ramona.gradinariu@analog.com>"); | |
| MODULE_AUTHOR("Antoniu Miclaus <antoniu.miclaus@analog.com>"); | |
| MODULE_AUTHOR("Robert Budai <robert.budai@analog.com>"); | |
| MODULE_DESCRIPTION("Analog Devices ADIS16550 IMU driver"); | |
| MODULE_IMPORT_NS("IIO_ADISLIB"); | |
| MODULE_LICENSE("GPL"); |