| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * ST SPEAr1310-miphy driver | |
| * | |
| * Copyright (C) 2014 ST Microelectronics | |
| * Pratyush Anand <pratyush.anand@gmail.com> | |
| * Mohit Kumar <mohit.kumar.dhaka@gmail.com> | |
| */ | |
| #include <linux/bitops.h> | |
| #include <linux/delay.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mfd/syscon.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/phy/phy.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regmap.h> | |
| /* SPEAr1310 Registers */ | |
| #define SPEAR1310_PCIE_SATA_CFG 0x3A4 | |
| #define SPEAR1310_PCIE_SATA2_SEL_PCIE (0 << 31) | |
| #define SPEAR1310_PCIE_SATA1_SEL_PCIE (0 << 30) | |
| #define SPEAR1310_PCIE_SATA0_SEL_PCIE (0 << 29) | |
| #define SPEAR1310_PCIE_SATA2_SEL_SATA BIT(31) | |
| #define SPEAR1310_PCIE_SATA1_SEL_SATA BIT(30) | |
| #define SPEAR1310_PCIE_SATA0_SEL_SATA BIT(29) | |
| #define SPEAR1310_SATA2_CFG_TX_CLK_EN BIT(27) | |
| #define SPEAR1310_SATA2_CFG_RX_CLK_EN BIT(26) | |
| #define SPEAR1310_SATA2_CFG_POWERUP_RESET BIT(25) | |
| #define SPEAR1310_SATA2_CFG_PM_CLK_EN BIT(24) | |
| #define SPEAR1310_SATA1_CFG_TX_CLK_EN BIT(23) | |
| #define SPEAR1310_SATA1_CFG_RX_CLK_EN BIT(22) | |
| #define SPEAR1310_SATA1_CFG_POWERUP_RESET BIT(21) | |
| #define SPEAR1310_SATA1_CFG_PM_CLK_EN BIT(20) | |
| #define SPEAR1310_SATA0_CFG_TX_CLK_EN BIT(19) | |
| #define SPEAR1310_SATA0_CFG_RX_CLK_EN BIT(18) | |
| #define SPEAR1310_SATA0_CFG_POWERUP_RESET BIT(17) | |
| #define SPEAR1310_SATA0_CFG_PM_CLK_EN BIT(16) | |
| #define SPEAR1310_PCIE2_CFG_DEVICE_PRESENT BIT(11) | |
| #define SPEAR1310_PCIE2_CFG_POWERUP_RESET BIT(10) | |
| #define SPEAR1310_PCIE2_CFG_CORE_CLK_EN BIT(9) | |
| #define SPEAR1310_PCIE2_CFG_AUX_CLK_EN BIT(8) | |
| #define SPEAR1310_PCIE1_CFG_DEVICE_PRESENT BIT(7) | |
| #define SPEAR1310_PCIE1_CFG_POWERUP_RESET BIT(6) | |
| #define SPEAR1310_PCIE1_CFG_CORE_CLK_EN BIT(5) | |
| #define SPEAR1310_PCIE1_CFG_AUX_CLK_EN BIT(4) | |
| #define SPEAR1310_PCIE0_CFG_DEVICE_PRESENT BIT(3) | |
| #define SPEAR1310_PCIE0_CFG_POWERUP_RESET BIT(2) | |
| #define SPEAR1310_PCIE0_CFG_CORE_CLK_EN BIT(1) | |
| #define SPEAR1310_PCIE0_CFG_AUX_CLK_EN BIT(0) | |
| #define SPEAR1310_PCIE_CFG_MASK(x) ((0xF << (x * 4)) | BIT((x + 29))) | |
| #define SPEAR1310_SATA_CFG_MASK(x) ((0xF << (x * 4 + 16)) | \ | |
| BIT((x + 29))) | |
| #define SPEAR1310_PCIE_CFG_VAL(x) \ | |
| (SPEAR1310_PCIE_SATA##x##_SEL_PCIE | \ | |
| SPEAR1310_PCIE##x##_CFG_AUX_CLK_EN | \ | |
| SPEAR1310_PCIE##x##_CFG_CORE_CLK_EN | \ | |
| SPEAR1310_PCIE##x##_CFG_POWERUP_RESET | \ | |
| SPEAR1310_PCIE##x##_CFG_DEVICE_PRESENT) | |
| #define SPEAR1310_SATA_CFG_VAL(x) \ | |
| (SPEAR1310_PCIE_SATA##x##_SEL_SATA | \ | |
| SPEAR1310_SATA##x##_CFG_PM_CLK_EN | \ | |
| SPEAR1310_SATA##x##_CFG_POWERUP_RESET | \ | |
| SPEAR1310_SATA##x##_CFG_RX_CLK_EN | \ | |
| SPEAR1310_SATA##x##_CFG_TX_CLK_EN) | |
| #define SPEAR1310_PCIE_MIPHY_CFG_1 0x3A8 | |
| #define SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT BIT(31) | |
| #define SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 BIT(28) | |
| #define SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(x) (x << 16) | |
| #define SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT BIT(15) | |
| #define SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 BIT(12) | |
| #define SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(x) (x << 0) | |
| #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_MASK (0xFFFF) | |
| #define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK (0xFFFF << 16) | |
| #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA \ | |
| (SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \ | |
| SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 | \ | |
| SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(60) | \ | |
| SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \ | |
| SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 | \ | |
| SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(60)) | |
| #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \ | |
| (SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(120)) | |
| #define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE \ | |
| (SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \ | |
| SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(25) | \ | |
| SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \ | |
| SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(25)) | |
| #define SPEAR1310_PCIE_MIPHY_CFG_2 0x3AC | |
| enum spear1310_miphy_mode { | |
| SATA, | |
| PCIE, | |
| }; | |
| struct spear1310_miphy_priv { | |
| /* instance id of this phy */ | |
| u32 id; | |
| /* phy mode: 0 for SATA 1 for PCIe */ | |
| enum spear1310_miphy_mode mode; | |
| /* regmap for any soc specific misc registers */ | |
| struct regmap *misc; | |
| /* phy struct pointer */ | |
| struct phy *phy; | |
| }; | |
| static int spear1310_miphy_pcie_init(struct spear1310_miphy_priv *priv) | |
| { | |
| u32 val; | |
| regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1, | |
| SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK, | |
| SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE); | |
| switch (priv->id) { | |
| case 0: | |
| val = SPEAR1310_PCIE_CFG_VAL(0); | |
| break; | |
| case 1: | |
| val = SPEAR1310_PCIE_CFG_VAL(1); | |
| break; | |
| case 2: | |
| val = SPEAR1310_PCIE_CFG_VAL(2); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| regmap_update_bits(priv->misc, SPEAR1310_PCIE_SATA_CFG, | |
| SPEAR1310_PCIE_CFG_MASK(priv->id), val); | |
| return 0; | |
| } | |
| static int spear1310_miphy_pcie_exit(struct spear1310_miphy_priv *priv) | |
| { | |
| regmap_update_bits(priv->misc, SPEAR1310_PCIE_SATA_CFG, | |
| SPEAR1310_PCIE_CFG_MASK(priv->id), 0); | |
| regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1, | |
| SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK, 0); | |
| return 0; | |
| } | |
| static int spear1310_miphy_init(struct phy *phy) | |
| { | |
| struct spear1310_miphy_priv *priv = phy_get_drvdata(phy); | |
| int ret = 0; | |
| if (priv->mode == PCIE) | |
| ret = spear1310_miphy_pcie_init(priv); | |
| return ret; | |
| } | |
| static int spear1310_miphy_exit(struct phy *phy) | |
| { | |
| struct spear1310_miphy_priv *priv = phy_get_drvdata(phy); | |
| int ret = 0; | |
| if (priv->mode == PCIE) | |
| ret = spear1310_miphy_pcie_exit(priv); | |
| return ret; | |
| } | |
| static const struct of_device_id spear1310_miphy_of_match[] = { | |
| { .compatible = "st,spear1310-miphy" }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, spear1310_miphy_of_match); | |
| static const struct phy_ops spear1310_miphy_ops = { | |
| .init = spear1310_miphy_init, | |
| .exit = spear1310_miphy_exit, | |
| .owner = THIS_MODULE, | |
| }; | |
| static struct phy *spear1310_miphy_xlate(struct device *dev, | |
| const struct of_phandle_args *args) | |
| { | |
| struct spear1310_miphy_priv *priv = dev_get_drvdata(dev); | |
| if (args->args_count < 1) { | |
| dev_err(dev, "DT did not pass correct no of args\n"); | |
| return ERR_PTR(-ENODEV); | |
| } | |
| priv->mode = args->args[0]; | |
| if (priv->mode != SATA && priv->mode != PCIE) { | |
| dev_err(dev, "DT did not pass correct phy mode\n"); | |
| return ERR_PTR(-ENODEV); | |
| } | |
| return priv->phy; | |
| } | |
| static int spear1310_miphy_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct spear1310_miphy_priv *priv; | |
| struct phy_provider *phy_provider; | |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); | |
| if (!priv) | |
| return -ENOMEM; | |
| priv->misc = | |
| syscon_regmap_lookup_by_phandle(dev->of_node, "misc"); | |
| if (IS_ERR(priv->misc)) { | |
| dev_err(dev, "failed to find misc regmap\n"); | |
| return PTR_ERR(priv->misc); | |
| } | |
| if (of_property_read_u32(dev->of_node, "phy-id", &priv->id)) { | |
| dev_err(dev, "failed to find phy id\n"); | |
| return -EINVAL; | |
| } | |
| priv->phy = devm_phy_create(dev, NULL, &spear1310_miphy_ops); | |
| if (IS_ERR(priv->phy)) { | |
| dev_err(dev, "failed to create SATA PCIe PHY\n"); | |
| return PTR_ERR(priv->phy); | |
| } | |
| dev_set_drvdata(dev, priv); | |
| phy_set_drvdata(priv->phy, priv); | |
| phy_provider = | |
| devm_of_phy_provider_register(dev, spear1310_miphy_xlate); | |
| if (IS_ERR(phy_provider)) { | |
| dev_err(dev, "failed to register phy provider\n"); | |
| return PTR_ERR(phy_provider); | |
| } | |
| return 0; | |
| } | |
| static struct platform_driver spear1310_miphy_driver = { | |
| .probe = spear1310_miphy_probe, | |
| .driver = { | |
| .name = "spear1310-miphy", | |
| .of_match_table = spear1310_miphy_of_match, | |
| }, | |
| }; | |
| module_platform_driver(spear1310_miphy_driver); | |
| MODULE_DESCRIPTION("ST SPEAR1310-MIPHY driver"); | |
| MODULE_AUTHOR("Pratyush Anand <pratyush.anand@gmail.com>"); | |
| MODULE_LICENSE("GPL v2"); |