| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * simple driver for PWM (Pulse Width Modulator) controller | |
| * | |
| * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com> | |
| */ | |
| #include <linux/bitfield.h> | |
| #include <linux/bitops.h> | |
| #include <linux/clk.h> | |
| #include <linux/delay.h> | |
| #include <linux/err.h> | |
| #include <linux/io.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/of_device.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/pwm.h> | |
| #include <linux/slab.h> | |
| #define MX3_PWMCR 0x00 /* PWM Control Register */ | |
| #define MX3_PWMSR 0x04 /* PWM Status Register */ | |
| #define MX3_PWMSAR 0x0C /* PWM Sample Register */ | |
| #define MX3_PWMPR 0x10 /* PWM Period Register */ | |
| #define MX3_PWMCR_FWM GENMASK(27, 26) | |
| #define MX3_PWMCR_STOPEN BIT(25) | |
| #define MX3_PWMCR_DOZEN BIT(24) | |
| #define MX3_PWMCR_WAITEN BIT(23) | |
| #define MX3_PWMCR_DBGEN BIT(22) | |
| #define MX3_PWMCR_BCTR BIT(21) | |
| #define MX3_PWMCR_HCTR BIT(20) | |
| #define MX3_PWMCR_POUTC GENMASK(19, 18) | |
| #define MX3_PWMCR_POUTC_NORMAL 0 | |
| #define MX3_PWMCR_POUTC_INVERTED 1 | |
| #define MX3_PWMCR_POUTC_OFF 2 | |
| #define MX3_PWMCR_CLKSRC GENMASK(17, 16) | |
| #define MX3_PWMCR_CLKSRC_OFF 0 | |
| #define MX3_PWMCR_CLKSRC_IPG 1 | |
| #define MX3_PWMCR_CLKSRC_IPG_HIGH 2 | |
| #define MX3_PWMCR_CLKSRC_IPG_32K 3 | |
| #define MX3_PWMCR_PRESCALER GENMASK(15, 4) | |
| #define MX3_PWMCR_SWR BIT(3) | |
| #define MX3_PWMCR_REPEAT GENMASK(2, 1) | |
| #define MX3_PWMCR_REPEAT_1X 0 | |
| #define MX3_PWMCR_REPEAT_2X 1 | |
| #define MX3_PWMCR_REPEAT_4X 2 | |
| #define MX3_PWMCR_REPEAT_8X 3 | |
| #define MX3_PWMCR_EN BIT(0) | |
| #define MX3_PWMSR_FWE BIT(6) | |
| #define MX3_PWMSR_CMP BIT(5) | |
| #define MX3_PWMSR_ROV BIT(4) | |
| #define MX3_PWMSR_FE BIT(3) | |
| #define MX3_PWMSR_FIFOAV GENMASK(2, 0) | |
| #define MX3_PWMSR_FIFOAV_EMPTY 0 | |
| #define MX3_PWMSR_FIFOAV_1WORD 1 | |
| #define MX3_PWMSR_FIFOAV_2WORDS 2 | |
| #define MX3_PWMSR_FIFOAV_3WORDS 3 | |
| #define MX3_PWMSR_FIFOAV_4WORDS 4 | |
| #define MX3_PWMCR_PRESCALER_SET(x) FIELD_PREP(MX3_PWMCR_PRESCALER, (x) - 1) | |
| #define MX3_PWMCR_PRESCALER_GET(x) (FIELD_GET(MX3_PWMCR_PRESCALER, \ | |
| (x)) + 1) | |
| #define MX3_PWM_SWR_LOOP 5 | |
| /* PWMPR register value of 0xffff has the same effect as 0xfffe */ | |
| #define MX3_PWMPR_MAX 0xfffe | |
| struct pwm_imx27_chip { | |
| struct clk *clk_ipg; | |
| struct clk *clk_per; | |
| void __iomem *mmio_base; | |
| struct pwm_chip chip; | |
| }; | |
| #define to_pwm_imx27_chip(chip) container_of(chip, struct pwm_imx27_chip, chip) | |
| static int pwm_imx27_clk_prepare_enable(struct pwm_chip *chip) | |
| { | |
| struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip); | |
| int ret; | |
| ret = clk_prepare_enable(imx->clk_ipg); | |
| if (ret) | |
| return ret; | |
| ret = clk_prepare_enable(imx->clk_per); | |
| if (ret) { | |
| clk_disable_unprepare(imx->clk_ipg); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static void pwm_imx27_clk_disable_unprepare(struct pwm_chip *chip) | |
| { | |
| struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip); | |
| clk_disable_unprepare(imx->clk_per); | |
| clk_disable_unprepare(imx->clk_ipg); | |
| } | |
| static void pwm_imx27_get_state(struct pwm_chip *chip, | |
| struct pwm_device *pwm, struct pwm_state *state) | |
| { | |
| struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip); | |
| u32 period, prescaler, pwm_clk, val; | |
| u64 tmp; | |
| int ret; | |
| ret = pwm_imx27_clk_prepare_enable(chip); | |
| if (ret < 0) | |
| return; | |
| val = readl(imx->mmio_base + MX3_PWMCR); | |
| if (val & MX3_PWMCR_EN) | |
| state->enabled = true; | |
| else | |
| state->enabled = false; | |
| switch (FIELD_GET(MX3_PWMCR_POUTC, val)) { | |
| case MX3_PWMCR_POUTC_NORMAL: | |
| state->polarity = PWM_POLARITY_NORMAL; | |
| break; | |
| case MX3_PWMCR_POUTC_INVERTED: | |
| state->polarity = PWM_POLARITY_INVERSED; | |
| break; | |
| default: | |
| dev_warn(chip->dev, "can't set polarity, output disconnected"); | |
| } | |
| prescaler = MX3_PWMCR_PRESCALER_GET(val); | |
| pwm_clk = clk_get_rate(imx->clk_per); | |
| pwm_clk = DIV_ROUND_CLOSEST_ULL(pwm_clk, prescaler); | |
| val = readl(imx->mmio_base + MX3_PWMPR); | |
| period = val >= MX3_PWMPR_MAX ? MX3_PWMPR_MAX : val; | |
| /* PWMOUT (Hz) = PWMCLK / (PWMPR + 2) */ | |
| tmp = NSEC_PER_SEC * (u64)(period + 2); | |
| state->period = DIV_ROUND_CLOSEST_ULL(tmp, pwm_clk); | |
| /* PWMSAR can be read only if PWM is enabled */ | |
| if (state->enabled) { | |
| val = readl(imx->mmio_base + MX3_PWMSAR); | |
| tmp = NSEC_PER_SEC * (u64)(val); | |
| state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, pwm_clk); | |
| } else { | |
| state->duty_cycle = 0; | |
| } | |
| if (!state->enabled) | |
| pwm_imx27_clk_disable_unprepare(chip); | |
| } | |
| static void pwm_imx27_sw_reset(struct pwm_chip *chip) | |
| { | |
| struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip); | |
| struct device *dev = chip->dev; | |
| int wait_count = 0; | |
| u32 cr; | |
| writel(MX3_PWMCR_SWR, imx->mmio_base + MX3_PWMCR); | |
| do { | |
| usleep_range(200, 1000); | |
| cr = readl(imx->mmio_base + MX3_PWMCR); | |
| } while ((cr & MX3_PWMCR_SWR) && | |
| (wait_count++ < MX3_PWM_SWR_LOOP)); | |
| if (cr & MX3_PWMCR_SWR) | |
| dev_warn(dev, "software reset timeout\n"); | |
| } | |
| static void pwm_imx27_wait_fifo_slot(struct pwm_chip *chip, | |
| struct pwm_device *pwm) | |
| { | |
| struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip); | |
| struct device *dev = chip->dev; | |
| unsigned int period_ms; | |
| int fifoav; | |
| u32 sr; | |
| sr = readl(imx->mmio_base + MX3_PWMSR); | |
| fifoav = FIELD_GET(MX3_PWMSR_FIFOAV, sr); | |
| if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) { | |
| period_ms = DIV_ROUND_UP(pwm_get_period(pwm), | |
| NSEC_PER_MSEC); | |
| msleep(period_ms); | |
| sr = readl(imx->mmio_base + MX3_PWMSR); | |
| if (fifoav == FIELD_GET(MX3_PWMSR_FIFOAV, sr)) | |
| dev_warn(dev, "there is no free FIFO slot\n"); | |
| } | |
| } | |
| static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm, | |
| struct pwm_state *state) | |
| { | |
| unsigned long period_cycles, duty_cycles, prescale; | |
| struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip); | |
| struct pwm_state cstate; | |
| unsigned long long c; | |
| int ret; | |
| u32 cr; | |
| pwm_get_state(pwm, &cstate); | |
| if (state->enabled) { | |
| c = clk_get_rate(imx->clk_per); | |
| c *= state->period; | |
| do_div(c, 1000000000); | |
| period_cycles = c; | |
| prescale = period_cycles / 0x10000 + 1; | |
| period_cycles /= prescale; | |
| c = (unsigned long long)period_cycles * state->duty_cycle; | |
| do_div(c, state->period); | |
| duty_cycles = c; | |
| /* | |
| * according to imx pwm RM, the real period value should be | |
| * PERIOD value in PWMPR plus 2. | |
| */ | |
| if (period_cycles > 2) | |
| period_cycles -= 2; | |
| else | |
| period_cycles = 0; | |
| /* | |
| * Wait for a free FIFO slot if the PWM is already enabled, and | |
| * flush the FIFO if the PWM was disabled and is about to be | |
| * enabled. | |
| */ | |
| if (cstate.enabled) { | |
| pwm_imx27_wait_fifo_slot(chip, pwm); | |
| } else { | |
| ret = pwm_imx27_clk_prepare_enable(chip); | |
| if (ret) | |
| return ret; | |
| pwm_imx27_sw_reset(chip); | |
| } | |
| writel(duty_cycles, imx->mmio_base + MX3_PWMSAR); | |
| writel(period_cycles, imx->mmio_base + MX3_PWMPR); | |
| cr = MX3_PWMCR_PRESCALER_SET(prescale) | | |
| MX3_PWMCR_STOPEN | MX3_PWMCR_DOZEN | MX3_PWMCR_WAITEN | | |
| FIELD_PREP(MX3_PWMCR_CLKSRC, MX3_PWMCR_CLKSRC_IPG_HIGH) | | |
| MX3_PWMCR_DBGEN | MX3_PWMCR_EN; | |
| if (state->polarity == PWM_POLARITY_INVERSED) | |
| cr |= FIELD_PREP(MX3_PWMCR_POUTC, | |
| MX3_PWMCR_POUTC_INVERTED); | |
| writel(cr, imx->mmio_base + MX3_PWMCR); | |
| } else if (cstate.enabled) { | |
| writel(0, imx->mmio_base + MX3_PWMCR); | |
| pwm_imx27_clk_disable_unprepare(chip); | |
| } | |
| return 0; | |
| } | |
| static const struct pwm_ops pwm_imx27_ops = { | |
| .apply = pwm_imx27_apply, | |
| .get_state = pwm_imx27_get_state, | |
| .owner = THIS_MODULE, | |
| }; | |
| static const struct of_device_id pwm_imx27_dt_ids[] = { | |
| { .compatible = "fsl,imx27-pwm", }, | |
| { /* sentinel */ } | |
| }; | |
| MODULE_DEVICE_TABLE(of, pwm_imx27_dt_ids); | |
| static int pwm_imx27_probe(struct platform_device *pdev) | |
| { | |
| struct pwm_imx27_chip *imx; | |
| struct resource *r; | |
| imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL); | |
| if (imx == NULL) | |
| return -ENOMEM; | |
| platform_set_drvdata(pdev, imx); | |
| imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); | |
| if (IS_ERR(imx->clk_ipg)) { | |
| dev_err(&pdev->dev, "getting ipg clock failed with %ld\n", | |
| PTR_ERR(imx->clk_ipg)); | |
| return PTR_ERR(imx->clk_ipg); | |
| } | |
| imx->clk_per = devm_clk_get(&pdev->dev, "per"); | |
| if (IS_ERR(imx->clk_per)) { | |
| int ret = PTR_ERR(imx->clk_per); | |
| if (ret != -EPROBE_DEFER) | |
| dev_err(&pdev->dev, | |
| "failed to get peripheral clock: %d\n", | |
| ret); | |
| return ret; | |
| } | |
| imx->chip.ops = &pwm_imx27_ops; | |
| imx->chip.dev = &pdev->dev; | |
| imx->chip.base = -1; | |
| imx->chip.npwm = 1; | |
| imx->chip.of_xlate = of_pwm_xlate_with_flags; | |
| imx->chip.of_pwm_n_cells = 3; | |
| r = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| imx->mmio_base = devm_ioremap_resource(&pdev->dev, r); | |
| if (IS_ERR(imx->mmio_base)) | |
| return PTR_ERR(imx->mmio_base); | |
| return pwmchip_add(&imx->chip); | |
| } | |
| static int pwm_imx27_remove(struct platform_device *pdev) | |
| { | |
| struct pwm_imx27_chip *imx; | |
| imx = platform_get_drvdata(pdev); | |
| pwm_imx27_clk_disable_unprepare(&imx->chip); | |
| return pwmchip_remove(&imx->chip); | |
| } | |
| static struct platform_driver imx_pwm_driver = { | |
| .driver = { | |
| .name = "pwm-imx27", | |
| .of_match_table = pwm_imx27_dt_ids, | |
| }, | |
| .probe = pwm_imx27_probe, | |
| .remove = pwm_imx27_remove, | |
| }; | |
| module_platform_driver(imx_pwm_driver); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); |