|  | /* | 
|  | * Driver for SiliconFile NOON010PC30 CIF (1/11") Image Sensor with ISP | 
|  | * | 
|  | * Copyright (C) 2010 - 2011 Samsung Electronics Co., Ltd. | 
|  | * Contact: Sylwester Nawrocki, <s.nawrocki@samsung.com> | 
|  | * | 
|  | * Initial register configuration based on a driver authored by | 
|  | * HeungJun Kim <riverful.kim@samsung.com>. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | */ | 
|  |  | 
|  | #include <linux/delay.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/regulator/consumer.h> | 
|  | #include <media/i2c/noon010pc30.h> | 
|  | #include <linux/videodev2.h> | 
|  | #include <linux/module.h> | 
|  | #include <media/v4l2-ctrls.h> | 
|  | #include <media/v4l2-device.h> | 
|  | #include <media/v4l2-mediabus.h> | 
|  | #include <media/v4l2-subdev.h> | 
|  |  | 
|  | static int debug; | 
|  | module_param(debug, int, 0644); | 
|  | MODULE_PARM_DESC(debug, "Enable module debug trace. Set to 1 to enable."); | 
|  |  | 
|  | #define MODULE_NAME		"NOON010PC30" | 
|  |  | 
|  | /* | 
|  | * Register offsets within a page | 
|  | * b15..b8 - page id, b7..b0 - register address | 
|  | */ | 
|  | #define POWER_CTRL_REG		0x0001 | 
|  | #define PAGEMODE_REG		0x03 | 
|  | #define DEVICE_ID_REG		0x0004 | 
|  | #define NOON010PC30_ID		0x86 | 
|  | #define VDO_CTL_REG(n)		(0x0010 + (n)) | 
|  | #define SYNC_CTL_REG		0x0012 | 
|  | /* Window size and position */ | 
|  | #define WIN_ROWH_REG		0x0013 | 
|  | #define WIN_ROWL_REG		0x0014 | 
|  | #define WIN_COLH_REG		0x0015 | 
|  | #define WIN_COLL_REG		0x0016 | 
|  | #define WIN_HEIGHTH_REG		0x0017 | 
|  | #define WIN_HEIGHTL_REG		0x0018 | 
|  | #define WIN_WIDTHH_REG		0x0019 | 
|  | #define WIN_WIDTHL_REG		0x001A | 
|  | #define HBLANKH_REG		0x001B | 
|  | #define HBLANKL_REG		0x001C | 
|  | #define VSYNCH_REG		0x001D | 
|  | #define VSYNCL_REG		0x001E | 
|  | /* VSYNC control */ | 
|  | #define VS_CTL_REG(n)		(0x00A1 + (n)) | 
|  | /* page 1 */ | 
|  | #define ISP_CTL_REG(n)		(0x0110 + (n)) | 
|  | #define YOFS_REG		0x0119 | 
|  | #define DARK_YOFS_REG		0x011A | 
|  | #define SAT_CTL_REG		0x0120 | 
|  | #define BSAT_REG		0x0121 | 
|  | #define RSAT_REG		0x0122 | 
|  | /* Color correction */ | 
|  | #define CMC_CTL_REG		0x0130 | 
|  | #define CMC_OFSGH_REG		0x0133 | 
|  | #define CMC_OFSGL_REG		0x0135 | 
|  | #define CMC_SIGN_REG		0x0136 | 
|  | #define CMC_GOFS_REG		0x0137 | 
|  | #define CMC_COEF_REG(n)		(0x0138 + (n)) | 
|  | #define CMC_OFS_REG(n)		(0x0141 + (n)) | 
|  | /* Gamma correction */ | 
|  | #define GMA_CTL_REG		0x0160 | 
|  | #define GMA_COEF_REG(n)		(0x0161 + (n)) | 
|  | /* Lens Shading */ | 
|  | #define LENS_CTRL_REG		0x01D0 | 
|  | #define LENS_XCEN_REG		0x01D1 | 
|  | #define LENS_YCEN_REG		0x01D2 | 
|  | #define LENS_RC_REG		0x01D3 | 
|  | #define LENS_GC_REG		0x01D4 | 
|  | #define LENS_BC_REG		0x01D5 | 
|  | #define L_AGON_REG		0x01D6 | 
|  | #define L_AGOFF_REG		0x01D7 | 
|  | /* Page 3 - Auto Exposure */ | 
|  | #define AE_CTL_REG(n)		(0x0310 + (n)) | 
|  | #define AE_CTL9_REG		0x032C | 
|  | #define AE_CTL10_REG		0x032D | 
|  | #define AE_YLVL_REG		0x031C | 
|  | #define AE_YTH_REG(n)		(0x031D + (n)) | 
|  | #define AE_WGT_REG		0x0326 | 
|  | #define EXP_TIMEH_REG		0x0333 | 
|  | #define EXP_TIMEM_REG		0x0334 | 
|  | #define EXP_TIMEL_REG		0x0335 | 
|  | #define EXP_MMINH_REG		0x0336 | 
|  | #define EXP_MMINL_REG		0x0337 | 
|  | #define EXP_MMAXH_REG		0x0338 | 
|  | #define EXP_MMAXM_REG		0x0339 | 
|  | #define EXP_MMAXL_REG		0x033A | 
|  | /* Page 4 - Auto White Balance */ | 
|  | #define AWB_CTL_REG(n)		(0x0410 + (n)) | 
|  | #define AWB_ENABE		0x80 | 
|  | #define AWB_WGHT_REG		0x0419 | 
|  | #define BGAIN_PAR_REG(n)	(0x044F + (n)) | 
|  | /* Manual white balance, when AWB_CTL2[0]=1 */ | 
|  | #define MWB_RGAIN_REG		0x0466 | 
|  | #define MWB_BGAIN_REG		0x0467 | 
|  |  | 
|  | /* The token to mark an array end */ | 
|  | #define REG_TERM		0xFFFF | 
|  |  | 
|  | struct noon010_format { | 
|  | u32 code; | 
|  | enum v4l2_colorspace colorspace; | 
|  | u16 ispctl1_reg; | 
|  | }; | 
|  |  | 
|  | struct noon010_frmsize { | 
|  | u16 width; | 
|  | u16 height; | 
|  | int vid_ctl1; | 
|  | }; | 
|  |  | 
|  | static const char * const noon010_supply_name[] = { | 
|  | "vdd_core", "vddio", "vdda" | 
|  | }; | 
|  |  | 
|  | #define NOON010_NUM_SUPPLIES ARRAY_SIZE(noon010_supply_name) | 
|  |  | 
|  | struct noon010_info { | 
|  | struct v4l2_subdev sd; | 
|  | struct media_pad pad; | 
|  | struct v4l2_ctrl_handler hdl; | 
|  | struct regulator_bulk_data supply[NOON010_NUM_SUPPLIES]; | 
|  | u32 gpio_nreset; | 
|  | u32 gpio_nstby; | 
|  |  | 
|  | /* Protects the struct members below */ | 
|  | struct mutex lock; | 
|  |  | 
|  | const struct noon010_format *curr_fmt; | 
|  | const struct noon010_frmsize *curr_win; | 
|  | unsigned int apply_new_cfg:1; | 
|  | unsigned int streaming:1; | 
|  | unsigned int hflip:1; | 
|  | unsigned int vflip:1; | 
|  | unsigned int power:1; | 
|  | u8 i2c_reg_page; | 
|  | }; | 
|  |  | 
|  | struct i2c_regval { | 
|  | u16 addr; | 
|  | u16 val; | 
|  | }; | 
|  |  | 
|  | /* Supported resolutions. */ | 
|  | static const struct noon010_frmsize noon010_sizes[] = { | 
|  | { | 
|  | .width		= 352, | 
|  | .height		= 288, | 
|  | .vid_ctl1	= 0, | 
|  | }, { | 
|  | .width		= 176, | 
|  | .height		= 144, | 
|  | .vid_ctl1	= 0x10, | 
|  | }, { | 
|  | .width		= 88, | 
|  | .height		= 72, | 
|  | .vid_ctl1	= 0x20, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /* Supported pixel formats. */ | 
|  | static const struct noon010_format noon010_formats[] = { | 
|  | { | 
|  | .code		= MEDIA_BUS_FMT_YUYV8_2X8, | 
|  | .colorspace	= V4L2_COLORSPACE_JPEG, | 
|  | .ispctl1_reg	= 0x03, | 
|  | }, { | 
|  | .code		= MEDIA_BUS_FMT_YVYU8_2X8, | 
|  | .colorspace	= V4L2_COLORSPACE_JPEG, | 
|  | .ispctl1_reg	= 0x02, | 
|  | }, { | 
|  | .code		= MEDIA_BUS_FMT_VYUY8_2X8, | 
|  | .colorspace	= V4L2_COLORSPACE_JPEG, | 
|  | .ispctl1_reg	= 0, | 
|  | }, { | 
|  | .code		= MEDIA_BUS_FMT_UYVY8_2X8, | 
|  | .colorspace	= V4L2_COLORSPACE_JPEG, | 
|  | .ispctl1_reg	= 0x01, | 
|  | }, { | 
|  | .code		= MEDIA_BUS_FMT_RGB565_2X8_BE, | 
|  | .colorspace	= V4L2_COLORSPACE_JPEG, | 
|  | .ispctl1_reg	= 0x40, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct i2c_regval noon010_base_regs[] = { | 
|  | { WIN_COLL_REG,		0x06 },	{ HBLANKL_REG,		0x7C }, | 
|  | /* Color corection and saturation */ | 
|  | { ISP_CTL_REG(0),	0x30 }, { ISP_CTL_REG(2),	0x30 }, | 
|  | { YOFS_REG,		0x80 }, { DARK_YOFS_REG,	0x04 }, | 
|  | { SAT_CTL_REG,		0x1F }, { BSAT_REG,		0x90 }, | 
|  | { CMC_CTL_REG,		0x0F }, { CMC_OFSGH_REG,	0x3C }, | 
|  | { CMC_OFSGL_REG,	0x2C }, { CMC_SIGN_REG,		0x3F }, | 
|  | { CMC_COEF_REG(0),	0x79 }, { CMC_OFS_REG(0),	0x00 }, | 
|  | { CMC_COEF_REG(1),	0x39 }, { CMC_OFS_REG(1),	0x00 }, | 
|  | { CMC_COEF_REG(2),	0x00 }, { CMC_OFS_REG(2),	0x00 }, | 
|  | { CMC_COEF_REG(3),	0x11 }, { CMC_OFS_REG(3),	0x8B }, | 
|  | { CMC_COEF_REG(4),	0x65 }, { CMC_OFS_REG(4),	0x07 }, | 
|  | { CMC_COEF_REG(5),	0x14 }, { CMC_OFS_REG(5),	0x04 }, | 
|  | { CMC_COEF_REG(6),	0x01 }, { CMC_OFS_REG(6),	0x9C }, | 
|  | { CMC_COEF_REG(7),	0x33 }, { CMC_OFS_REG(7),	0x89 }, | 
|  | { CMC_COEF_REG(8),	0x74 }, { CMC_OFS_REG(8),	0x25 }, | 
|  | /* Automatic white balance */ | 
|  | { AWB_CTL_REG(0),	0x78 }, { AWB_CTL_REG(1),	0x2E }, | 
|  | { AWB_CTL_REG(2),	0x20 }, { AWB_CTL_REG(3),	0x85 }, | 
|  | /* Auto exposure */ | 
|  | { AE_CTL_REG(0),	0xDC }, { AE_CTL_REG(1),	0x81 }, | 
|  | { AE_CTL_REG(2),	0x30 }, { AE_CTL_REG(3),	0xA5 }, | 
|  | { AE_CTL_REG(4),	0x40 }, { AE_CTL_REG(5),	0x51 }, | 
|  | { AE_CTL_REG(6),	0x33 }, { AE_CTL_REG(7),	0x7E }, | 
|  | { AE_CTL9_REG,		0x00 }, { AE_CTL10_REG,		0x02 }, | 
|  | { AE_YLVL_REG,		0x44 },	{ AE_YTH_REG(0),	0x34 }, | 
|  | { AE_YTH_REG(1),	0x30 },	{ AE_WGT_REG,		0xD5 }, | 
|  | /* Lens shading compensation */ | 
|  | { LENS_CTRL_REG,	0x01 }, { LENS_XCEN_REG,	0x80 }, | 
|  | { LENS_YCEN_REG,	0x70 }, { LENS_RC_REG,		0x53 }, | 
|  | { LENS_GC_REG,		0x40 }, { LENS_BC_REG,		0x3E }, | 
|  | { REG_TERM,		0 }, | 
|  | }; | 
|  |  | 
|  | static inline struct noon010_info *to_noon010(struct v4l2_subdev *sd) | 
|  | { | 
|  | return container_of(sd, struct noon010_info, sd); | 
|  | } | 
|  |  | 
|  | static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) | 
|  | { | 
|  | return &container_of(ctrl->handler, struct noon010_info, hdl)->sd; | 
|  | } | 
|  |  | 
|  | static inline int set_i2c_page(struct noon010_info *info, | 
|  | struct i2c_client *client, unsigned int reg) | 
|  | { | 
|  | u32 page = reg >> 8 & 0xFF; | 
|  | int ret = 0; | 
|  |  | 
|  | if (info->i2c_reg_page != page && (reg & 0xFF) != 0x03) { | 
|  | ret = i2c_smbus_write_byte_data(client, PAGEMODE_REG, page); | 
|  | if (!ret) | 
|  | info->i2c_reg_page = page; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int cam_i2c_read(struct v4l2_subdev *sd, u32 reg_addr) | 
|  | { | 
|  | struct i2c_client *client = v4l2_get_subdevdata(sd); | 
|  | struct noon010_info *info = to_noon010(sd); | 
|  | int ret = set_i2c_page(info, client, reg_addr); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  | return i2c_smbus_read_byte_data(client, reg_addr & 0xFF); | 
|  | } | 
|  |  | 
|  | static int cam_i2c_write(struct v4l2_subdev *sd, u32 reg_addr, u32 val) | 
|  | { | 
|  | struct i2c_client *client = v4l2_get_subdevdata(sd); | 
|  | struct noon010_info *info = to_noon010(sd); | 
|  | int ret = set_i2c_page(info, client, reg_addr); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  | return i2c_smbus_write_byte_data(client, reg_addr & 0xFF, val); | 
|  | } | 
|  |  | 
|  | static inline int noon010_bulk_write_reg(struct v4l2_subdev *sd, | 
|  | const struct i2c_regval *msg) | 
|  | { | 
|  | while (msg->addr != REG_TERM) { | 
|  | int ret = cam_i2c_write(sd, msg->addr, msg->val); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  | msg++; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Device reset and sleep mode control */ | 
|  | static int noon010_power_ctrl(struct v4l2_subdev *sd, bool reset, bool sleep) | 
|  | { | 
|  | struct noon010_info *info = to_noon010(sd); | 
|  | u8 reg = sleep ? 0xF1 : 0xF0; | 
|  | int ret = 0; | 
|  |  | 
|  | if (reset) { | 
|  | ret = cam_i2c_write(sd, POWER_CTRL_REG, reg | 0x02); | 
|  | udelay(20); | 
|  | } | 
|  | if (!ret) { | 
|  | ret = cam_i2c_write(sd, POWER_CTRL_REG, reg); | 
|  | if (reset && !ret) | 
|  | info->i2c_reg_page = -1; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Automatic white balance control */ | 
|  | static int noon010_enable_autowhitebalance(struct v4l2_subdev *sd, int on) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = cam_i2c_write(sd, AWB_CTL_REG(1), on ? 0x2E : 0x2F); | 
|  | if (!ret) | 
|  | ret = cam_i2c_write(sd, AWB_CTL_REG(0), on ? 0xFB : 0x7B); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Called with struct noon010_info.lock mutex held */ | 
|  | static int noon010_set_flip(struct v4l2_subdev *sd, int hflip, int vflip) | 
|  | { | 
|  | struct noon010_info *info = to_noon010(sd); | 
|  | int reg, ret; | 
|  |  | 
|  | reg = cam_i2c_read(sd, VDO_CTL_REG(1)); | 
|  | if (reg < 0) | 
|  | return reg; | 
|  |  | 
|  | reg &= 0x7C; | 
|  | if (hflip) | 
|  | reg |= 0x01; | 
|  | if (vflip) | 
|  | reg |= 0x02; | 
|  |  | 
|  | ret = cam_i2c_write(sd, VDO_CTL_REG(1), reg | 0x80); | 
|  | if (!ret) { | 
|  | info->hflip = hflip; | 
|  | info->vflip = vflip; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Configure resolution and color format */ | 
|  | static int noon010_set_params(struct v4l2_subdev *sd) | 
|  | { | 
|  | struct noon010_info *info = to_noon010(sd); | 
|  |  | 
|  | int ret = cam_i2c_write(sd, VDO_CTL_REG(0), | 
|  | info->curr_win->vid_ctl1); | 
|  | if (ret) | 
|  | return ret; | 
|  | return cam_i2c_write(sd, ISP_CTL_REG(0), | 
|  | info->curr_fmt->ispctl1_reg); | 
|  | } | 
|  |  | 
|  | /* Find nearest matching image pixel size. */ | 
|  | static int noon010_try_frame_size(struct v4l2_mbus_framefmt *mf, | 
|  | const struct noon010_frmsize **size) | 
|  | { | 
|  | unsigned int min_err = ~0; | 
|  | int i = ARRAY_SIZE(noon010_sizes); | 
|  | const struct noon010_frmsize *fsize = &noon010_sizes[0], | 
|  | *match = NULL; | 
|  |  | 
|  | while (i--) { | 
|  | int err = abs(fsize->width - mf->width) | 
|  | + abs(fsize->height - mf->height); | 
|  |  | 
|  | if (err < min_err) { | 
|  | min_err = err; | 
|  | match = fsize; | 
|  | } | 
|  | fsize++; | 
|  | } | 
|  | if (match) { | 
|  | mf->width  = match->width; | 
|  | mf->height = match->height; | 
|  | if (size) | 
|  | *size = match; | 
|  | return 0; | 
|  | } | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Called with info.lock mutex held */ | 
|  | static int power_enable(struct noon010_info *info) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (info->power) { | 
|  | v4l2_info(&info->sd, "%s: sensor is already on\n", __func__); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (gpio_is_valid(info->gpio_nstby)) | 
|  | gpio_set_value(info->gpio_nstby, 0); | 
|  |  | 
|  | if (gpio_is_valid(info->gpio_nreset)) | 
|  | gpio_set_value(info->gpio_nreset, 0); | 
|  |  | 
|  | ret = regulator_bulk_enable(NOON010_NUM_SUPPLIES, info->supply); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (gpio_is_valid(info->gpio_nreset)) { | 
|  | msleep(50); | 
|  | gpio_set_value(info->gpio_nreset, 1); | 
|  | } | 
|  | if (gpio_is_valid(info->gpio_nstby)) { | 
|  | udelay(1000); | 
|  | gpio_set_value(info->gpio_nstby, 1); | 
|  | } | 
|  | if (gpio_is_valid(info->gpio_nreset)) { | 
|  | udelay(1000); | 
|  | gpio_set_value(info->gpio_nreset, 0); | 
|  | msleep(100); | 
|  | gpio_set_value(info->gpio_nreset, 1); | 
|  | msleep(20); | 
|  | } | 
|  | info->power = 1; | 
|  |  | 
|  | v4l2_dbg(1, debug, &info->sd,  "%s: sensor is on\n", __func__); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Called with info.lock mutex held */ | 
|  | static int power_disable(struct noon010_info *info) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (!info->power) { | 
|  | v4l2_info(&info->sd, "%s: sensor is already off\n", __func__); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | ret = regulator_bulk_disable(NOON010_NUM_SUPPLIES, info->supply); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (gpio_is_valid(info->gpio_nstby)) | 
|  | gpio_set_value(info->gpio_nstby, 0); | 
|  |  | 
|  | if (gpio_is_valid(info->gpio_nreset)) | 
|  | gpio_set_value(info->gpio_nreset, 0); | 
|  |  | 
|  | info->power = 0; | 
|  |  | 
|  | v4l2_dbg(1, debug, &info->sd,  "%s: sensor is off\n", __func__); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int noon010_s_ctrl(struct v4l2_ctrl *ctrl) | 
|  | { | 
|  | struct v4l2_subdev *sd = to_sd(ctrl); | 
|  | struct noon010_info *info = to_noon010(sd); | 
|  | int ret = 0; | 
|  |  | 
|  | v4l2_dbg(1, debug, sd, "%s: ctrl_id: %d, value: %d\n", | 
|  | __func__, ctrl->id, ctrl->val); | 
|  |  | 
|  | mutex_lock(&info->lock); | 
|  | /* | 
|  | * If the device is not powered up by the host driver do | 
|  | * not apply any controls to H/W at this time. Instead | 
|  | * the controls will be restored right after power-up. | 
|  | */ | 
|  | if (!info->power) | 
|  | goto unlock; | 
|  |  | 
|  | switch (ctrl->id) { | 
|  | case V4L2_CID_AUTO_WHITE_BALANCE: | 
|  | ret = noon010_enable_autowhitebalance(sd, ctrl->val); | 
|  | break; | 
|  | case V4L2_CID_BLUE_BALANCE: | 
|  | ret = cam_i2c_write(sd, MWB_BGAIN_REG, ctrl->val); | 
|  | break; | 
|  | case V4L2_CID_RED_BALANCE: | 
|  | ret =  cam_i2c_write(sd, MWB_RGAIN_REG, ctrl->val); | 
|  | break; | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | } | 
|  | unlock: | 
|  | mutex_unlock(&info->lock); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int noon010_enum_mbus_code(struct v4l2_subdev *sd, | 
|  | struct v4l2_subdev_pad_config *cfg, | 
|  | struct v4l2_subdev_mbus_code_enum *code) | 
|  | { | 
|  | if (code->index >= ARRAY_SIZE(noon010_formats)) | 
|  | return -EINVAL; | 
|  |  | 
|  | code->code = noon010_formats[code->index].code; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int noon010_get_fmt(struct v4l2_subdev *sd, | 
|  | struct v4l2_subdev_pad_config *cfg, | 
|  | struct v4l2_subdev_format *fmt) | 
|  | { | 
|  | struct noon010_info *info = to_noon010(sd); | 
|  | struct v4l2_mbus_framefmt *mf; | 
|  |  | 
|  | if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { | 
|  | if (cfg) { | 
|  | mf = v4l2_subdev_get_try_format(sd, cfg, 0); | 
|  | fmt->format = *mf; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  | mf = &fmt->format; | 
|  |  | 
|  | mutex_lock(&info->lock); | 
|  | mf->width = info->curr_win->width; | 
|  | mf->height = info->curr_win->height; | 
|  | mf->code = info->curr_fmt->code; | 
|  | mf->colorspace = info->curr_fmt->colorspace; | 
|  | mf->field = V4L2_FIELD_NONE; | 
|  |  | 
|  | mutex_unlock(&info->lock); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Return nearest media bus frame format. */ | 
|  | static const struct noon010_format *noon010_try_fmt(struct v4l2_subdev *sd, | 
|  | struct v4l2_mbus_framefmt *mf) | 
|  | { | 
|  | int i = ARRAY_SIZE(noon010_formats); | 
|  |  | 
|  | while (--i) | 
|  | if (mf->code == noon010_formats[i].code) | 
|  | break; | 
|  | mf->code = noon010_formats[i].code; | 
|  |  | 
|  | return &noon010_formats[i]; | 
|  | } | 
|  |  | 
|  | static int noon010_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg, | 
|  | struct v4l2_subdev_format *fmt) | 
|  | { | 
|  | struct noon010_info *info = to_noon010(sd); | 
|  | const struct noon010_frmsize *size = NULL; | 
|  | const struct noon010_format *nf; | 
|  | struct v4l2_mbus_framefmt *mf; | 
|  | int ret = 0; | 
|  |  | 
|  | nf = noon010_try_fmt(sd, &fmt->format); | 
|  | noon010_try_frame_size(&fmt->format, &size); | 
|  | fmt->format.colorspace = V4L2_COLORSPACE_JPEG; | 
|  | fmt->format.field = V4L2_FIELD_NONE; | 
|  |  | 
|  | if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { | 
|  | if (cfg) { | 
|  | mf = v4l2_subdev_get_try_format(sd, cfg, 0); | 
|  | *mf = fmt->format; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  | mutex_lock(&info->lock); | 
|  | if (!info->streaming) { | 
|  | info->apply_new_cfg = 1; | 
|  | info->curr_fmt = nf; | 
|  | info->curr_win = size; | 
|  | } else { | 
|  | ret = -EBUSY; | 
|  | } | 
|  | mutex_unlock(&info->lock); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Called with struct noon010_info.lock mutex held */ | 
|  | static int noon010_base_config(struct v4l2_subdev *sd) | 
|  | { | 
|  | int ret = noon010_bulk_write_reg(sd, noon010_base_regs); | 
|  | if (!ret) | 
|  | ret = noon010_set_params(sd); | 
|  | if (!ret) | 
|  | ret = noon010_set_flip(sd, 1, 0); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int noon010_s_power(struct v4l2_subdev *sd, int on) | 
|  | { | 
|  | struct noon010_info *info = to_noon010(sd); | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&info->lock); | 
|  | if (on) { | 
|  | ret = power_enable(info); | 
|  | if (!ret) | 
|  | ret = noon010_base_config(sd); | 
|  | } else { | 
|  | noon010_power_ctrl(sd, false, true); | 
|  | ret = power_disable(info); | 
|  | } | 
|  | mutex_unlock(&info->lock); | 
|  |  | 
|  | /* Restore the controls state */ | 
|  | if (!ret && on) | 
|  | ret = v4l2_ctrl_handler_setup(&info->hdl); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int noon010_s_stream(struct v4l2_subdev *sd, int on) | 
|  | { | 
|  | struct noon010_info *info = to_noon010(sd); | 
|  | int ret = 0; | 
|  |  | 
|  | mutex_lock(&info->lock); | 
|  | if (!info->streaming != !on) { | 
|  | ret = noon010_power_ctrl(sd, false, !on); | 
|  | if (!ret) | 
|  | info->streaming = on; | 
|  | } | 
|  | if (!ret && on && info->apply_new_cfg) { | 
|  | ret = noon010_set_params(sd); | 
|  | if (!ret) | 
|  | info->apply_new_cfg = 0; | 
|  | } | 
|  | mutex_unlock(&info->lock); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int noon010_log_status(struct v4l2_subdev *sd) | 
|  | { | 
|  | struct noon010_info *info = to_noon010(sd); | 
|  |  | 
|  | v4l2_ctrl_handler_log_status(&info->hdl, sd->name); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int noon010_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) | 
|  | { | 
|  | struct v4l2_mbus_framefmt *mf = v4l2_subdev_get_try_format(sd, fh->pad, 0); | 
|  |  | 
|  | mf->width = noon010_sizes[0].width; | 
|  | mf->height = noon010_sizes[0].height; | 
|  | mf->code = noon010_formats[0].code; | 
|  | mf->colorspace = V4L2_COLORSPACE_JPEG; | 
|  | mf->field = V4L2_FIELD_NONE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct v4l2_subdev_internal_ops noon010_subdev_internal_ops = { | 
|  | .open = noon010_open, | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_ctrl_ops noon010_ctrl_ops = { | 
|  | .s_ctrl = noon010_s_ctrl, | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_subdev_core_ops noon010_core_ops = { | 
|  | .s_power	= noon010_s_power, | 
|  | .log_status	= noon010_log_status, | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_subdev_pad_ops noon010_pad_ops = { | 
|  | .enum_mbus_code	= noon010_enum_mbus_code, | 
|  | .get_fmt	= noon010_get_fmt, | 
|  | .set_fmt	= noon010_set_fmt, | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_subdev_video_ops noon010_video_ops = { | 
|  | .s_stream	= noon010_s_stream, | 
|  | }; | 
|  |  | 
|  | static const struct v4l2_subdev_ops noon010_ops = { | 
|  | .core	= &noon010_core_ops, | 
|  | .pad	= &noon010_pad_ops, | 
|  | .video	= &noon010_video_ops, | 
|  | }; | 
|  |  | 
|  | /* Return 0 if NOON010PC30L sensor type was detected or -ENODEV otherwise. */ | 
|  | static int noon010_detect(struct i2c_client *client, struct noon010_info *info) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = power_enable(info); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = i2c_smbus_read_byte_data(client, DEVICE_ID_REG); | 
|  | if (ret < 0) | 
|  | dev_err(&client->dev, "I2C read failed: 0x%X\n", ret); | 
|  |  | 
|  | power_disable(info); | 
|  |  | 
|  | return ret == NOON010PC30_ID ? 0 : -ENODEV; | 
|  | } | 
|  |  | 
|  | static int noon010_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct noon010_info *info; | 
|  | struct v4l2_subdev *sd; | 
|  | const struct noon010pc30_platform_data *pdata | 
|  | = client->dev.platform_data; | 
|  | int ret; | 
|  | int i; | 
|  |  | 
|  | if (!pdata) { | 
|  | dev_err(&client->dev, "No platform data!\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL); | 
|  | if (!info) | 
|  | return -ENOMEM; | 
|  |  | 
|  | mutex_init(&info->lock); | 
|  | sd = &info->sd; | 
|  | v4l2_i2c_subdev_init(sd, client, &noon010_ops); | 
|  | strlcpy(sd->name, MODULE_NAME, sizeof(sd->name)); | 
|  |  | 
|  | sd->internal_ops = &noon010_subdev_internal_ops; | 
|  | sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; | 
|  |  | 
|  | v4l2_ctrl_handler_init(&info->hdl, 3); | 
|  |  | 
|  | v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops, | 
|  | V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1); | 
|  | v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops, | 
|  | V4L2_CID_RED_BALANCE, 0, 127, 1, 64); | 
|  | v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops, | 
|  | V4L2_CID_BLUE_BALANCE, 0, 127, 1, 64); | 
|  |  | 
|  | sd->ctrl_handler = &info->hdl; | 
|  |  | 
|  | ret = info->hdl.error; | 
|  | if (ret) | 
|  | goto np_err; | 
|  |  | 
|  | info->i2c_reg_page	= -1; | 
|  | info->gpio_nreset	= -EINVAL; | 
|  | info->gpio_nstby	= -EINVAL; | 
|  | info->curr_fmt		= &noon010_formats[0]; | 
|  | info->curr_win		= &noon010_sizes[0]; | 
|  |  | 
|  | if (gpio_is_valid(pdata->gpio_nreset)) { | 
|  | ret = devm_gpio_request_one(&client->dev, pdata->gpio_nreset, | 
|  | GPIOF_OUT_INIT_LOW, | 
|  | "NOON010PC30 NRST"); | 
|  | if (ret) { | 
|  | dev_err(&client->dev, "GPIO request error: %d\n", ret); | 
|  | goto np_err; | 
|  | } | 
|  | info->gpio_nreset = pdata->gpio_nreset; | 
|  | gpio_export(info->gpio_nreset, 0); | 
|  | } | 
|  |  | 
|  | if (gpio_is_valid(pdata->gpio_nstby)) { | 
|  | ret = devm_gpio_request_one(&client->dev, pdata->gpio_nstby, | 
|  | GPIOF_OUT_INIT_LOW, | 
|  | "NOON010PC30 NSTBY"); | 
|  | if (ret) { | 
|  | dev_err(&client->dev, "GPIO request error: %d\n", ret); | 
|  | goto np_err; | 
|  | } | 
|  | info->gpio_nstby = pdata->gpio_nstby; | 
|  | gpio_export(info->gpio_nstby, 0); | 
|  | } | 
|  |  | 
|  | for (i = 0; i < NOON010_NUM_SUPPLIES; i++) | 
|  | info->supply[i].supply = noon010_supply_name[i]; | 
|  |  | 
|  | ret = devm_regulator_bulk_get(&client->dev, NOON010_NUM_SUPPLIES, | 
|  | info->supply); | 
|  | if (ret) | 
|  | goto np_err; | 
|  |  | 
|  | info->pad.flags = MEDIA_PAD_FL_SOURCE; | 
|  | sd->entity.function = MEDIA_ENT_F_CAM_SENSOR; | 
|  | ret = media_entity_pads_init(&sd->entity, 1, &info->pad); | 
|  | if (ret < 0) | 
|  | goto np_err; | 
|  |  | 
|  | ret = noon010_detect(client, info); | 
|  | if (!ret) | 
|  | return 0; | 
|  |  | 
|  | np_err: | 
|  | v4l2_ctrl_handler_free(&info->hdl); | 
|  | v4l2_device_unregister_subdev(sd); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int noon010_remove(struct i2c_client *client) | 
|  | { | 
|  | struct v4l2_subdev *sd = i2c_get_clientdata(client); | 
|  | struct noon010_info *info = to_noon010(sd); | 
|  |  | 
|  | v4l2_device_unregister_subdev(sd); | 
|  | v4l2_ctrl_handler_free(&info->hdl); | 
|  | media_entity_cleanup(&sd->entity); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id noon010_id[] = { | 
|  | { MODULE_NAME, 0 }, | 
|  | { }, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, noon010_id); | 
|  |  | 
|  |  | 
|  | static struct i2c_driver noon010_i2c_driver = { | 
|  | .driver = { | 
|  | .name = MODULE_NAME | 
|  | }, | 
|  | .probe		= noon010_probe, | 
|  | .remove		= noon010_remove, | 
|  | .id_table	= noon010_id, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(noon010_i2c_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("Siliconfile NOON010PC30 camera driver"); | 
|  | MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>"); | 
|  | MODULE_LICENSE("GPL"); |