| /* | |
| * ALSA soundcard driver for Miro miroSOUND PCM1 pro | |
| * miroSOUND PCM12 | |
| * miroSOUND PCM20 Radio | |
| * | |
| * Copyright (C) 2004-2005 Martin Langer <martin-langer@gmx.de> | |
| * | |
| * Based on OSS ACI and ALSA OPTi9xx drivers | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/err.h> | |
| #include <linux/isa.h> | |
| #include <linux/pnp.h> | |
| #include <linux/delay.h> | |
| #include <linux/ioport.h> | |
| #include <linux/module.h> | |
| #include <linux/io.h> | |
| #include <asm/dma.h> | |
| #include <sound/core.h> | |
| #include <sound/wss.h> | |
| #include <sound/mpu401.h> | |
| #include <sound/opl4.h> | |
| #include <sound/control.h> | |
| #include <sound/info.h> | |
| #define SNDRV_LEGACY_FIND_FREE_IOPORT | |
| #define SNDRV_LEGACY_FIND_FREE_IRQ | |
| #define SNDRV_LEGACY_FIND_FREE_DMA | |
| #include <sound/initval.h> | |
| #include <sound/aci.h> | |
| MODULE_AUTHOR("Martin Langer <martin-langer@gmx.de>"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DESCRIPTION("Miro miroSOUND PCM1 pro, PCM12, PCM20 Radio"); | |
| MODULE_SUPPORTED_DEVICE("{{Miro,miroSOUND PCM1 pro}, " | |
| "{Miro,miroSOUND PCM12}, " | |
| "{Miro,miroSOUND PCM20 Radio}}"); | |
| static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */ | |
| static char *id = SNDRV_DEFAULT_STR1; /* ID for this card */ | |
| static long port = SNDRV_DEFAULT_PORT1; /* 0x530,0xe80,0xf40,0x604 */ | |
| static long mpu_port = SNDRV_DEFAULT_PORT1; /* 0x300,0x310,0x320,0x330 */ | |
| static long fm_port = SNDRV_DEFAULT_PORT1; /* 0x388 */ | |
| static int irq = SNDRV_DEFAULT_IRQ1; /* 5,7,9,10,11 */ | |
| static int mpu_irq = SNDRV_DEFAULT_IRQ1; /* 5,7,9,10 */ | |
| static int dma1 = SNDRV_DEFAULT_DMA1; /* 0,1,3 */ | |
| static int dma2 = SNDRV_DEFAULT_DMA1; /* 0,1,3 */ | |
| static int wss; | |
| static int ide; | |
| #ifdef CONFIG_PNP | |
| static bool isapnp = 1; /* Enable ISA PnP detection */ | |
| #endif | |
| module_param(index, int, 0444); | |
| MODULE_PARM_DESC(index, "Index value for miro soundcard."); | |
| module_param(id, charp, 0444); | |
| MODULE_PARM_DESC(id, "ID string for miro soundcard."); | |
| module_param_hw(port, long, ioport, 0444); | |
| MODULE_PARM_DESC(port, "WSS port # for miro driver."); | |
| module_param_hw(mpu_port, long, ioport, 0444); | |
| MODULE_PARM_DESC(mpu_port, "MPU-401 port # for miro driver."); | |
| module_param_hw(fm_port, long, ioport, 0444); | |
| MODULE_PARM_DESC(fm_port, "FM Port # for miro driver."); | |
| module_param_hw(irq, int, irq, 0444); | |
| MODULE_PARM_DESC(irq, "WSS irq # for miro driver."); | |
| module_param_hw(mpu_irq, int, irq, 0444); | |
| MODULE_PARM_DESC(mpu_irq, "MPU-401 irq # for miro driver."); | |
| module_param_hw(dma1, int, dma, 0444); | |
| MODULE_PARM_DESC(dma1, "1st dma # for miro driver."); | |
| module_param_hw(dma2, int, dma, 0444); | |
| MODULE_PARM_DESC(dma2, "2nd dma # for miro driver."); | |
| module_param(wss, int, 0444); | |
| MODULE_PARM_DESC(wss, "wss mode"); | |
| module_param(ide, int, 0444); | |
| MODULE_PARM_DESC(ide, "enable ide port"); | |
| #ifdef CONFIG_PNP | |
| module_param(isapnp, bool, 0444); | |
| MODULE_PARM_DESC(isapnp, "Enable ISA PnP detection for specified soundcard."); | |
| #endif | |
| #define OPTi9XX_HW_DETECT 0 | |
| #define OPTi9XX_HW_82C928 1 | |
| #define OPTi9XX_HW_82C929 2 | |
| #define OPTi9XX_HW_82C924 3 | |
| #define OPTi9XX_HW_82C925 4 | |
| #define OPTi9XX_HW_82C930 5 | |
| #define OPTi9XX_HW_82C931 6 | |
| #define OPTi9XX_HW_82C933 7 | |
| #define OPTi9XX_HW_LAST OPTi9XX_HW_82C933 | |
| #define OPTi9XX_MC_REG(n) n | |
| struct snd_miro { | |
| unsigned short hardware; | |
| unsigned char password; | |
| char name[7]; | |
| struct resource *res_mc_base; | |
| struct resource *res_aci_port; | |
| unsigned long mc_base; | |
| unsigned long mc_base_size; | |
| unsigned long pwd_reg; | |
| spinlock_t lock; | |
| struct snd_pcm *pcm; | |
| long wss_base; | |
| int irq; | |
| int dma1; | |
| int dma2; | |
| long mpu_port; | |
| int mpu_irq; | |
| struct snd_miro_aci *aci; | |
| }; | |
| static struct snd_miro_aci aci_device; | |
| static char * snd_opti9xx_names[] = { | |
| "unknown", | |
| "82C928", "82C929", | |
| "82C924", "82C925", | |
| "82C930", "82C931", "82C933" | |
| }; | |
| static int snd_miro_pnp_is_probed; | |
| #ifdef CONFIG_PNP | |
| static struct pnp_card_device_id snd_miro_pnpids[] = { | |
| /* PCM20 and PCM12 in PnP mode */ | |
| { .id = "MIR0924", | |
| .devs = { { "MIR0000" }, { "MIR0002" }, { "MIR0005" } }, }, | |
| { .id = "" } | |
| }; | |
| MODULE_DEVICE_TABLE(pnp_card, snd_miro_pnpids); | |
| #endif /* CONFIG_PNP */ | |
| /* | |
| * ACI control | |
| */ | |
| static int aci_busy_wait(struct snd_miro_aci *aci) | |
| { | |
| long timeout; | |
| unsigned char byte; | |
| for (timeout = 1; timeout <= ACI_MINTIME + 30; timeout++) { | |
| byte = inb(aci->aci_port + ACI_REG_BUSY); | |
| if ((byte & 1) == 0) { | |
| if (timeout >= ACI_MINTIME) | |
| snd_printd("aci ready in round %ld.\n", | |
| timeout-ACI_MINTIME); | |
| return byte; | |
| } | |
| if (timeout >= ACI_MINTIME) { | |
| long out=10*HZ; | |
| switch (timeout-ACI_MINTIME) { | |
| case 0 ... 9: | |
| out /= 10; | |
| case 10 ... 19: | |
| out /= 10; | |
| case 20 ... 30: | |
| out /= 10; | |
| default: | |
| set_current_state(TASK_UNINTERRUPTIBLE); | |
| schedule_timeout(out); | |
| break; | |
| } | |
| } | |
| } | |
| snd_printk(KERN_ERR "aci_busy_wait() time out\n"); | |
| return -EBUSY; | |
| } | |
| static inline int aci_write(struct snd_miro_aci *aci, unsigned char byte) | |
| { | |
| if (aci_busy_wait(aci) >= 0) { | |
| outb(byte, aci->aci_port + ACI_REG_COMMAND); | |
| return 0; | |
| } else { | |
| snd_printk(KERN_ERR "aci busy, aci_write(0x%x) stopped.\n", byte); | |
| return -EBUSY; | |
| } | |
| } | |
| static inline int aci_read(struct snd_miro_aci *aci) | |
| { | |
| unsigned char byte; | |
| if (aci_busy_wait(aci) >= 0) { | |
| byte = inb(aci->aci_port + ACI_REG_STATUS); | |
| return byte; | |
| } else { | |
| snd_printk(KERN_ERR "aci busy, aci_read() stopped.\n"); | |
| return -EBUSY; | |
| } | |
| } | |
| int snd_aci_cmd(struct snd_miro_aci *aci, int write1, int write2, int write3) | |
| { | |
| int write[] = {write1, write2, write3}; | |
| int value, i; | |
| if (mutex_lock_interruptible(&aci->aci_mutex)) | |
| return -EINTR; | |
| for (i=0; i<3; i++) { | |
| if (write[i]< 0 || write[i] > 255) | |
| break; | |
| else { | |
| value = aci_write(aci, write[i]); | |
| if (value < 0) | |
| goto out; | |
| } | |
| } | |
| value = aci_read(aci); | |
| out: mutex_unlock(&aci->aci_mutex); | |
| return value; | |
| } | |
| EXPORT_SYMBOL(snd_aci_cmd); | |
| static int aci_getvalue(struct snd_miro_aci *aci, unsigned char index) | |
| { | |
| return snd_aci_cmd(aci, ACI_STATUS, index, -1); | |
| } | |
| static int aci_setvalue(struct snd_miro_aci *aci, unsigned char index, | |
| int value) | |
| { | |
| return snd_aci_cmd(aci, index, value, -1); | |
| } | |
| struct snd_miro_aci *snd_aci_get_aci(void) | |
| { | |
| if (aci_device.aci_port == 0) | |
| return NULL; | |
| return &aci_device; | |
| } | |
| EXPORT_SYMBOL(snd_aci_get_aci); | |
| /* | |
| * MIXER part | |
| */ | |
| #define snd_miro_info_capture snd_ctl_boolean_mono_info | |
| static int snd_miro_get_capture(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct snd_miro *miro = snd_kcontrol_chip(kcontrol); | |
| int value; | |
| value = aci_getvalue(miro->aci, ACI_S_GENERAL); | |
| if (value < 0) { | |
| snd_printk(KERN_ERR "snd_miro_get_capture() failed: %d\n", | |
| value); | |
| return value; | |
| } | |
| ucontrol->value.integer.value[0] = value & 0x20; | |
| return 0; | |
| } | |
| static int snd_miro_put_capture(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct snd_miro *miro = snd_kcontrol_chip(kcontrol); | |
| int change, value, error; | |
| value = !(ucontrol->value.integer.value[0]); | |
| error = aci_setvalue(miro->aci, ACI_SET_SOLOMODE, value); | |
| if (error < 0) { | |
| snd_printk(KERN_ERR "snd_miro_put_capture() failed: %d\n", | |
| error); | |
| return error; | |
| } | |
| change = (value != miro->aci->aci_solomode); | |
| miro->aci->aci_solomode = value; | |
| return change; | |
| } | |
| static int snd_miro_info_preamp(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_info *uinfo) | |
| { | |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; | |
| uinfo->count = 1; | |
| uinfo->value.integer.min = 0; | |
| uinfo->value.integer.max = 3; | |
| return 0; | |
| } | |
| static int snd_miro_get_preamp(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct snd_miro *miro = snd_kcontrol_chip(kcontrol); | |
| int value; | |
| if (miro->aci->aci_version <= 176) { | |
| /* | |
| OSS says it's not readable with versions < 176. | |
| But it doesn't work on my card, | |
| which is a PCM12 with aci_version = 176. | |
| */ | |
| ucontrol->value.integer.value[0] = miro->aci->aci_preamp; | |
| return 0; | |
| } | |
| value = aci_getvalue(miro->aci, ACI_GET_PREAMP); | |
| if (value < 0) { | |
| snd_printk(KERN_ERR "snd_miro_get_preamp() failed: %d\n", | |
| value); | |
| return value; | |
| } | |
| ucontrol->value.integer.value[0] = value; | |
| return 0; | |
| } | |
| static int snd_miro_put_preamp(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct snd_miro *miro = snd_kcontrol_chip(kcontrol); | |
| int error, value, change; | |
| value = ucontrol->value.integer.value[0]; | |
| error = aci_setvalue(miro->aci, ACI_SET_PREAMP, value); | |
| if (error < 0) { | |
| snd_printk(KERN_ERR "snd_miro_put_preamp() failed: %d\n", | |
| error); | |
| return error; | |
| } | |
| change = (value != miro->aci->aci_preamp); | |
| miro->aci->aci_preamp = value; | |
| return change; | |
| } | |
| #define snd_miro_info_amp snd_ctl_boolean_mono_info | |
| static int snd_miro_get_amp(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct snd_miro *miro = snd_kcontrol_chip(kcontrol); | |
| ucontrol->value.integer.value[0] = miro->aci->aci_amp; | |
| return 0; | |
| } | |
| static int snd_miro_put_amp(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct snd_miro *miro = snd_kcontrol_chip(kcontrol); | |
| int error, value, change; | |
| value = ucontrol->value.integer.value[0]; | |
| error = aci_setvalue(miro->aci, ACI_SET_POWERAMP, value); | |
| if (error < 0) { | |
| snd_printk(KERN_ERR "snd_miro_put_amp() to %d failed: %d\n", value, error); | |
| return error; | |
| } | |
| change = (value != miro->aci->aci_amp); | |
| miro->aci->aci_amp = value; | |
| return change; | |
| } | |
| #define MIRO_DOUBLE(ctl_name, ctl_index, get_right_reg, set_right_reg) \ | |
| { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ | |
| .name = ctl_name, \ | |
| .index = ctl_index, \ | |
| .info = snd_miro_info_double, \ | |
| .get = snd_miro_get_double, \ | |
| .put = snd_miro_put_double, \ | |
| .private_value = get_right_reg | (set_right_reg << 8) \ | |
| } | |
| static int snd_miro_info_double(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_info *uinfo) | |
| { | |
| int reg = kcontrol->private_value & 0xff; | |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; | |
| uinfo->count = 2; | |
| if ((reg >= ACI_GET_EQ1) && (reg <= ACI_GET_EQ7)) { | |
| /* equalizer elements */ | |
| uinfo->value.integer.min = - 0x7f; | |
| uinfo->value.integer.max = 0x7f; | |
| } else { | |
| /* non-equalizer elements */ | |
| uinfo->value.integer.min = 0; | |
| uinfo->value.integer.max = 0x20; | |
| } | |
| return 0; | |
| } | |
| static int snd_miro_get_double(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *uinfo) | |
| { | |
| struct snd_miro *miro = snd_kcontrol_chip(kcontrol); | |
| int left_val, right_val; | |
| int right_reg = kcontrol->private_value & 0xff; | |
| int left_reg = right_reg + 1; | |
| right_val = aci_getvalue(miro->aci, right_reg); | |
| if (right_val < 0) { | |
| snd_printk(KERN_ERR "aci_getvalue(%d) failed: %d\n", right_reg, right_val); | |
| return right_val; | |
| } | |
| left_val = aci_getvalue(miro->aci, left_reg); | |
| if (left_val < 0) { | |
| snd_printk(KERN_ERR "aci_getvalue(%d) failed: %d\n", left_reg, left_val); | |
| return left_val; | |
| } | |
| if ((right_reg >= ACI_GET_EQ1) && (right_reg <= ACI_GET_EQ7)) { | |
| /* equalizer elements */ | |
| if (left_val < 0x80) { | |
| uinfo->value.integer.value[0] = left_val; | |
| } else { | |
| uinfo->value.integer.value[0] = 0x80 - left_val; | |
| } | |
| if (right_val < 0x80) { | |
| uinfo->value.integer.value[1] = right_val; | |
| } else { | |
| uinfo->value.integer.value[1] = 0x80 - right_val; | |
| } | |
| } else { | |
| /* non-equalizer elements */ | |
| uinfo->value.integer.value[0] = 0x20 - left_val; | |
| uinfo->value.integer.value[1] = 0x20 - right_val; | |
| } | |
| return 0; | |
| } | |
| static int snd_miro_put_double(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct snd_miro *miro = snd_kcontrol_chip(kcontrol); | |
| struct snd_miro_aci *aci = miro->aci; | |
| int left, right, left_old, right_old; | |
| int setreg_left, setreg_right, getreg_left, getreg_right; | |
| int change, error; | |
| left = ucontrol->value.integer.value[0]; | |
| right = ucontrol->value.integer.value[1]; | |
| setreg_right = (kcontrol->private_value >> 8) & 0xff; | |
| setreg_left = setreg_right + 8; | |
| if (setreg_right == ACI_SET_MASTER) | |
| setreg_left -= 7; | |
| getreg_right = kcontrol->private_value & 0xff; | |
| getreg_left = getreg_right + 1; | |
| left_old = aci_getvalue(aci, getreg_left); | |
| if (left_old < 0) { | |
| snd_printk(KERN_ERR "aci_getvalue(%d) failed: %d\n", getreg_left, left_old); | |
| return left_old; | |
| } | |
| right_old = aci_getvalue(aci, getreg_right); | |
| if (right_old < 0) { | |
| snd_printk(KERN_ERR "aci_getvalue(%d) failed: %d\n", getreg_right, right_old); | |
| return right_old; | |
| } | |
| if ((getreg_right >= ACI_GET_EQ1) && (getreg_right <= ACI_GET_EQ7)) { | |
| /* equalizer elements */ | |
| if (left < -0x7f || left > 0x7f || | |
| right < -0x7f || right > 0x7f) | |
| return -EINVAL; | |
| if (left_old > 0x80) | |
| left_old = 0x80 - left_old; | |
| if (right_old > 0x80) | |
| right_old = 0x80 - right_old; | |
| if (left >= 0) { | |
| error = aci_setvalue(aci, setreg_left, left); | |
| if (error < 0) { | |
| snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n", | |
| left, error); | |
| return error; | |
| } | |
| } else { | |
| error = aci_setvalue(aci, setreg_left, 0x80 - left); | |
| if (error < 0) { | |
| snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n", | |
| 0x80 - left, error); | |
| return error; | |
| } | |
| } | |
| if (right >= 0) { | |
| error = aci_setvalue(aci, setreg_right, right); | |
| if (error < 0) { | |
| snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n", | |
| right, error); | |
| return error; | |
| } | |
| } else { | |
| error = aci_setvalue(aci, setreg_right, 0x80 - right); | |
| if (error < 0) { | |
| snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n", | |
| 0x80 - right, error); | |
| return error; | |
| } | |
| } | |
| } else { | |
| /* non-equalizer elements */ | |
| if (left < 0 || left > 0x20 || | |
| right < 0 || right > 0x20) | |
| return -EINVAL; | |
| left_old = 0x20 - left_old; | |
| right_old = 0x20 - right_old; | |
| error = aci_setvalue(aci, setreg_left, 0x20 - left); | |
| if (error < 0) { | |
| snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n", | |
| 0x20 - left, error); | |
| return error; | |
| } | |
| error = aci_setvalue(aci, setreg_right, 0x20 - right); | |
| if (error < 0) { | |
| snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n", | |
| 0x20 - right, error); | |
| return error; | |
| } | |
| } | |
| change = (left != left_old) || (right != right_old); | |
| return change; | |
| } | |
| static struct snd_kcontrol_new snd_miro_controls[] = { | |
| MIRO_DOUBLE("Master Playback Volume", 0, ACI_GET_MASTER, ACI_SET_MASTER), | |
| MIRO_DOUBLE("Mic Playback Volume", 1, ACI_GET_MIC, ACI_SET_MIC), | |
| MIRO_DOUBLE("Line Playback Volume", 1, ACI_GET_LINE, ACI_SET_LINE), | |
| MIRO_DOUBLE("CD Playback Volume", 0, ACI_GET_CD, ACI_SET_CD), | |
| MIRO_DOUBLE("Synth Playback Volume", 0, ACI_GET_SYNTH, ACI_SET_SYNTH), | |
| MIRO_DOUBLE("PCM Playback Volume", 1, ACI_GET_PCM, ACI_SET_PCM), | |
| MIRO_DOUBLE("Aux Playback Volume", 2, ACI_GET_LINE2, ACI_SET_LINE2), | |
| }; | |
| /* Equalizer with seven bands (only PCM20) | |
| from -12dB up to +12dB on each band */ | |
| static struct snd_kcontrol_new snd_miro_eq_controls[] = { | |
| MIRO_DOUBLE("Tone Control - 28 Hz", 0, ACI_GET_EQ1, ACI_SET_EQ1), | |
| MIRO_DOUBLE("Tone Control - 160 Hz", 0, ACI_GET_EQ2, ACI_SET_EQ2), | |
| MIRO_DOUBLE("Tone Control - 400 Hz", 0, ACI_GET_EQ3, ACI_SET_EQ3), | |
| MIRO_DOUBLE("Tone Control - 1 kHz", 0, ACI_GET_EQ4, ACI_SET_EQ4), | |
| MIRO_DOUBLE("Tone Control - 2.5 kHz", 0, ACI_GET_EQ5, ACI_SET_EQ5), | |
| MIRO_DOUBLE("Tone Control - 6.3 kHz", 0, ACI_GET_EQ6, ACI_SET_EQ6), | |
| MIRO_DOUBLE("Tone Control - 16 kHz", 0, ACI_GET_EQ7, ACI_SET_EQ7), | |
| }; | |
| static struct snd_kcontrol_new snd_miro_radio_control[] = { | |
| MIRO_DOUBLE("Radio Playback Volume", 0, ACI_GET_LINE1, ACI_SET_LINE1), | |
| }; | |
| static struct snd_kcontrol_new snd_miro_line_control[] = { | |
| MIRO_DOUBLE("Line Playback Volume", 2, ACI_GET_LINE1, ACI_SET_LINE1), | |
| }; | |
| static struct snd_kcontrol_new snd_miro_preamp_control[] = { | |
| { | |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, | |
| .name = "Mic Boost", | |
| .index = 1, | |
| .info = snd_miro_info_preamp, | |
| .get = snd_miro_get_preamp, | |
| .put = snd_miro_put_preamp, | |
| }}; | |
| static struct snd_kcontrol_new snd_miro_amp_control[] = { | |
| { | |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, | |
| .name = "Line Boost", | |
| .index = 0, | |
| .info = snd_miro_info_amp, | |
| .get = snd_miro_get_amp, | |
| .put = snd_miro_put_amp, | |
| }}; | |
| static struct snd_kcontrol_new snd_miro_capture_control[] = { | |
| { | |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, | |
| .name = "PCM Capture Switch", | |
| .index = 0, | |
| .info = snd_miro_info_capture, | |
| .get = snd_miro_get_capture, | |
| .put = snd_miro_put_capture, | |
| }}; | |
| static unsigned char aci_init_values[][2] = { | |
| { ACI_SET_MUTE, 0x00 }, | |
| { ACI_SET_POWERAMP, 0x00 }, | |
| { ACI_SET_PREAMP, 0x00 }, | |
| { ACI_SET_SOLOMODE, 0x00 }, | |
| { ACI_SET_MIC + 0, 0x20 }, | |
| { ACI_SET_MIC + 8, 0x20 }, | |
| { ACI_SET_LINE + 0, 0x20 }, | |
| { ACI_SET_LINE + 8, 0x20 }, | |
| { ACI_SET_CD + 0, 0x20 }, | |
| { ACI_SET_CD + 8, 0x20 }, | |
| { ACI_SET_PCM + 0, 0x20 }, | |
| { ACI_SET_PCM + 8, 0x20 }, | |
| { ACI_SET_LINE1 + 0, 0x20 }, | |
| { ACI_SET_LINE1 + 8, 0x20 }, | |
| { ACI_SET_LINE2 + 0, 0x20 }, | |
| { ACI_SET_LINE2 + 8, 0x20 }, | |
| { ACI_SET_SYNTH + 0, 0x20 }, | |
| { ACI_SET_SYNTH + 8, 0x20 }, | |
| { ACI_SET_MASTER + 0, 0x20 }, | |
| { ACI_SET_MASTER + 1, 0x20 }, | |
| }; | |
| static int snd_set_aci_init_values(struct snd_miro *miro) | |
| { | |
| int idx, error; | |
| struct snd_miro_aci *aci = miro->aci; | |
| /* enable WSS on PCM1 */ | |
| if ((aci->aci_product == 'A') && wss) { | |
| error = aci_setvalue(aci, ACI_SET_WSS, wss); | |
| if (error < 0) { | |
| snd_printk(KERN_ERR "enabling WSS mode failed\n"); | |
| return error; | |
| } | |
| } | |
| /* enable IDE port */ | |
| if (ide) { | |
| error = aci_setvalue(aci, ACI_SET_IDE, ide); | |
| if (error < 0) { | |
| snd_printk(KERN_ERR "enabling IDE port failed\n"); | |
| return error; | |
| } | |
| } | |
| /* set common aci values */ | |
| for (idx = 0; idx < ARRAY_SIZE(aci_init_values); idx++) { | |
| error = aci_setvalue(aci, aci_init_values[idx][0], | |
| aci_init_values[idx][1]); | |
| if (error < 0) { | |
| snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n", | |
| aci_init_values[idx][0], error); | |
| return error; | |
| } | |
| } | |
| aci->aci_amp = 0; | |
| aci->aci_preamp = 0; | |
| aci->aci_solomode = 1; | |
| return 0; | |
| } | |
| static int snd_miro_mixer(struct snd_card *card, | |
| struct snd_miro *miro) | |
| { | |
| unsigned int idx; | |
| int err; | |
| if (snd_BUG_ON(!miro || !card)) | |
| return -EINVAL; | |
| switch (miro->hardware) { | |
| case OPTi9XX_HW_82C924: | |
| strcpy(card->mixername, "ACI & OPTi924"); | |
| break; | |
| case OPTi9XX_HW_82C929: | |
| strcpy(card->mixername, "ACI & OPTi929"); | |
| break; | |
| default: | |
| snd_BUG(); | |
| break; | |
| } | |
| for (idx = 0; idx < ARRAY_SIZE(snd_miro_controls); idx++) { | |
| if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_controls[idx], miro))) < 0) | |
| return err; | |
| } | |
| if ((miro->aci->aci_product == 'A') || | |
| (miro->aci->aci_product == 'B')) { | |
| /* PCM1/PCM12 with power-amp and Line 2 */ | |
| if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_line_control[0], miro))) < 0) | |
| return err; | |
| if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_amp_control[0], miro))) < 0) | |
| return err; | |
| } | |
| if ((miro->aci->aci_product == 'B') || | |
| (miro->aci->aci_product == 'C')) { | |
| /* PCM12/PCM20 with mic-preamp */ | |
| if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_preamp_control[0], miro))) < 0) | |
| return err; | |
| if (miro->aci->aci_version >= 176) | |
| if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_capture_control[0], miro))) < 0) | |
| return err; | |
| } | |
| if (miro->aci->aci_product == 'C') { | |
| /* PCM20 with radio and 7 band equalizer */ | |
| if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_radio_control[0], miro))) < 0) | |
| return err; | |
| for (idx = 0; idx < ARRAY_SIZE(snd_miro_eq_controls); idx++) { | |
| if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_eq_controls[idx], miro))) < 0) | |
| return err; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int snd_miro_init(struct snd_miro *chip, | |
| unsigned short hardware) | |
| { | |
| static int opti9xx_mc_size[] = {7, 7, 10, 10, 2, 2, 2}; | |
| chip->hardware = hardware; | |
| strcpy(chip->name, snd_opti9xx_names[hardware]); | |
| chip->mc_base_size = opti9xx_mc_size[hardware]; | |
| spin_lock_init(&chip->lock); | |
| chip->wss_base = -1; | |
| chip->irq = -1; | |
| chip->dma1 = -1; | |
| chip->dma2 = -1; | |
| chip->mpu_port = -1; | |
| chip->mpu_irq = -1; | |
| chip->pwd_reg = 3; | |
| #ifdef CONFIG_PNP | |
| if (isapnp && chip->mc_base) | |
| /* PnP resource gives the least 10 bits */ | |
| chip->mc_base |= 0xc00; | |
| else | |
| #endif | |
| chip->mc_base = 0xf8c; | |
| switch (hardware) { | |
| case OPTi9XX_HW_82C929: | |
| chip->password = 0xe3; | |
| break; | |
| case OPTi9XX_HW_82C924: | |
| chip->password = 0xe5; | |
| break; | |
| default: | |
| snd_printk(KERN_ERR "sorry, no support for %d\n", hardware); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| static unsigned char snd_miro_read(struct snd_miro *chip, | |
| unsigned char reg) | |
| { | |
| unsigned long flags; | |
| unsigned char retval = 0xff; | |
| spin_lock_irqsave(&chip->lock, flags); | |
| outb(chip->password, chip->mc_base + chip->pwd_reg); | |
| switch (chip->hardware) { | |
| case OPTi9XX_HW_82C924: | |
| if (reg > 7) { | |
| outb(reg, chip->mc_base + 8); | |
| outb(chip->password, chip->mc_base + chip->pwd_reg); | |
| retval = inb(chip->mc_base + 9); | |
| break; | |
| } | |
| case OPTi9XX_HW_82C929: | |
| retval = inb(chip->mc_base + reg); | |
| break; | |
| default: | |
| snd_printk(KERN_ERR "sorry, no support for %d\n", chip->hardware); | |
| } | |
| spin_unlock_irqrestore(&chip->lock, flags); | |
| return retval; | |
| } | |
| static void snd_miro_write(struct snd_miro *chip, unsigned char reg, | |
| unsigned char value) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&chip->lock, flags); | |
| outb(chip->password, chip->mc_base + chip->pwd_reg); | |
| switch (chip->hardware) { | |
| case OPTi9XX_HW_82C924: | |
| if (reg > 7) { | |
| outb(reg, chip->mc_base + 8); | |
| outb(chip->password, chip->mc_base + chip->pwd_reg); | |
| outb(value, chip->mc_base + 9); | |
| break; | |
| } | |
| case OPTi9XX_HW_82C929: | |
| outb(value, chip->mc_base + reg); | |
| break; | |
| default: | |
| snd_printk(KERN_ERR "sorry, no support for %d\n", chip->hardware); | |
| } | |
| spin_unlock_irqrestore(&chip->lock, flags); | |
| } | |
| #define snd_miro_write_mask(chip, reg, value, mask) \ | |
| snd_miro_write(chip, reg, \ | |
| (snd_miro_read(chip, reg) & ~(mask)) | ((value) & (mask))) | |
| /* | |
| * Proc Interface | |
| */ | |
| static void snd_miro_proc_read(struct snd_info_entry * entry, | |
| struct snd_info_buffer *buffer) | |
| { | |
| struct snd_miro *miro = (struct snd_miro *) entry->private_data; | |
| struct snd_miro_aci *aci = miro->aci; | |
| char* model = "unknown"; | |
| /* miroSOUND PCM1 pro, early PCM12 */ | |
| if ((miro->hardware == OPTi9XX_HW_82C929) && | |
| (aci->aci_vendor == 'm') && | |
| (aci->aci_product == 'A')) { | |
| switch (aci->aci_version) { | |
| case 3: | |
| model = "miroSOUND PCM1 pro"; | |
| break; | |
| default: | |
| model = "miroSOUND PCM1 pro / (early) PCM12"; | |
| break; | |
| } | |
| } | |
| /* miroSOUND PCM12, PCM12 (Rev. E), PCM12 pnp */ | |
| if ((miro->hardware == OPTi9XX_HW_82C924) && | |
| (aci->aci_vendor == 'm') && | |
| (aci->aci_product == 'B')) { | |
| switch (aci->aci_version) { | |
| case 4: | |
| model = "miroSOUND PCM12"; | |
| break; | |
| case 176: | |
| model = "miroSOUND PCM12 (Rev. E)"; | |
| break; | |
| default: | |
| model = "miroSOUND PCM12 / PCM12 pnp"; | |
| break; | |
| } | |
| } | |
| /* miroSOUND PCM20 radio */ | |
| if ((miro->hardware == OPTi9XX_HW_82C924) && | |
| (aci->aci_vendor == 'm') && | |
| (aci->aci_product == 'C')) { | |
| switch (aci->aci_version) { | |
| case 7: | |
| model = "miroSOUND PCM20 radio (Rev. E)"; | |
| break; | |
| default: | |
| model = "miroSOUND PCM20 radio"; | |
| break; | |
| } | |
| } | |
| snd_iprintf(buffer, "\nGeneral information:\n"); | |
| snd_iprintf(buffer, " model : %s\n", model); | |
| snd_iprintf(buffer, " opti : %s\n", miro->name); | |
| snd_iprintf(buffer, " codec : %s\n", miro->pcm->name); | |
| snd_iprintf(buffer, " port : 0x%lx\n", miro->wss_base); | |
| snd_iprintf(buffer, " irq : %d\n", miro->irq); | |
| snd_iprintf(buffer, " dma : %d,%d\n\n", miro->dma1, miro->dma2); | |
| snd_iprintf(buffer, "MPU-401:\n"); | |
| snd_iprintf(buffer, " port : 0x%lx\n", miro->mpu_port); | |
| snd_iprintf(buffer, " irq : %d\n\n", miro->mpu_irq); | |
| snd_iprintf(buffer, "ACI information:\n"); | |
| snd_iprintf(buffer, " vendor : "); | |
| switch (aci->aci_vendor) { | |
| case 'm': | |
| snd_iprintf(buffer, "Miro\n"); | |
| break; | |
| default: | |
| snd_iprintf(buffer, "unknown (0x%x)\n", aci->aci_vendor); | |
| break; | |
| } | |
| snd_iprintf(buffer, " product : "); | |
| switch (aci->aci_product) { | |
| case 'A': | |
| snd_iprintf(buffer, "miroSOUND PCM1 pro / (early) PCM12\n"); | |
| break; | |
| case 'B': | |
| snd_iprintf(buffer, "miroSOUND PCM12\n"); | |
| break; | |
| case 'C': | |
| snd_iprintf(buffer, "miroSOUND PCM20 radio\n"); | |
| break; | |
| default: | |
| snd_iprintf(buffer, "unknown (0x%x)\n", aci->aci_product); | |
| break; | |
| } | |
| snd_iprintf(buffer, " firmware: %d (0x%x)\n", | |
| aci->aci_version, aci->aci_version); | |
| snd_iprintf(buffer, " port : 0x%lx-0x%lx\n", | |
| aci->aci_port, aci->aci_port+2); | |
| snd_iprintf(buffer, " wss : 0x%x\n", wss); | |
| snd_iprintf(buffer, " ide : 0x%x\n", ide); | |
| snd_iprintf(buffer, " solomode: 0x%x\n", aci->aci_solomode); | |
| snd_iprintf(buffer, " amp : 0x%x\n", aci->aci_amp); | |
| snd_iprintf(buffer, " preamp : 0x%x\n", aci->aci_preamp); | |
| } | |
| static void snd_miro_proc_init(struct snd_card *card, | |
| struct snd_miro *miro) | |
| { | |
| struct snd_info_entry *entry; | |
| if (!snd_card_proc_new(card, "miro", &entry)) | |
| snd_info_set_text_ops(entry, miro, snd_miro_proc_read); | |
| } | |
| /* | |
| * Init | |
| */ | |
| static int snd_miro_configure(struct snd_miro *chip) | |
| { | |
| unsigned char wss_base_bits; | |
| unsigned char irq_bits; | |
| unsigned char dma_bits; | |
| unsigned char mpu_port_bits = 0; | |
| unsigned char mpu_irq_bits; | |
| unsigned long flags; | |
| snd_miro_write_mask(chip, OPTi9XX_MC_REG(1), 0x80, 0x80); | |
| snd_miro_write_mask(chip, OPTi9XX_MC_REG(2), 0x20, 0x20); /* OPL4 */ | |
| snd_miro_write_mask(chip, OPTi9XX_MC_REG(5), 0x02, 0x02); | |
| switch (chip->hardware) { | |
| case OPTi9XX_HW_82C924: | |
| snd_miro_write_mask(chip, OPTi9XX_MC_REG(6), 0x02, 0x02); | |
| snd_miro_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff); | |
| break; | |
| case OPTi9XX_HW_82C929: | |
| /* untested init commands for OPTi929 */ | |
| snd_miro_write_mask(chip, OPTi9XX_MC_REG(4), 0x00, 0x0c); | |
| break; | |
| default: | |
| snd_printk(KERN_ERR "chip %d not supported\n", chip->hardware); | |
| return -EINVAL; | |
| } | |
| /* PnP resource says it decodes only 10 bits of address */ | |
| switch (chip->wss_base & 0x3ff) { | |
| case 0x130: | |
| chip->wss_base = 0x530; | |
| wss_base_bits = 0x00; | |
| break; | |
| case 0x204: | |
| chip->wss_base = 0x604; | |
| wss_base_bits = 0x03; | |
| break; | |
| case 0x280: | |
| chip->wss_base = 0xe80; | |
| wss_base_bits = 0x01; | |
| break; | |
| case 0x340: | |
| chip->wss_base = 0xf40; | |
| wss_base_bits = 0x02; | |
| break; | |
| default: | |
| snd_printk(KERN_ERR "WSS port 0x%lx not valid\n", chip->wss_base); | |
| goto __skip_base; | |
| } | |
| snd_miro_write_mask(chip, OPTi9XX_MC_REG(1), wss_base_bits << 4, 0x30); | |
| __skip_base: | |
| switch (chip->irq) { | |
| case 5: | |
| irq_bits = 0x05; | |
| break; | |
| case 7: | |
| irq_bits = 0x01; | |
| break; | |
| case 9: | |
| irq_bits = 0x02; | |
| break; | |
| case 10: | |
| irq_bits = 0x03; | |
| break; | |
| case 11: | |
| irq_bits = 0x04; | |
| break; | |
| default: | |
| snd_printk(KERN_ERR "WSS irq # %d not valid\n", chip->irq); | |
| goto __skip_resources; | |
| } | |
| switch (chip->dma1) { | |
| case 0: | |
| dma_bits = 0x01; | |
| break; | |
| case 1: | |
| dma_bits = 0x02; | |
| break; | |
| case 3: | |
| dma_bits = 0x03; | |
| break; | |
| default: | |
| snd_printk(KERN_ERR "WSS dma1 # %d not valid\n", chip->dma1); | |
| goto __skip_resources; | |
| } | |
| if (chip->dma1 == chip->dma2) { | |
| snd_printk(KERN_ERR "don't want to share dmas\n"); | |
| return -EBUSY; | |
| } | |
| switch (chip->dma2) { | |
| case 0: | |
| case 1: | |
| break; | |
| default: | |
| snd_printk(KERN_ERR "WSS dma2 # %d not valid\n", chip->dma2); | |
| goto __skip_resources; | |
| } | |
| dma_bits |= 0x04; | |
| spin_lock_irqsave(&chip->lock, flags); | |
| outb(irq_bits << 3 | dma_bits, chip->wss_base); | |
| spin_unlock_irqrestore(&chip->lock, flags); | |
| __skip_resources: | |
| if (chip->hardware > OPTi9XX_HW_82C928) { | |
| switch (chip->mpu_port) { | |
| case 0: | |
| case -1: | |
| break; | |
| case 0x300: | |
| mpu_port_bits = 0x03; | |
| break; | |
| case 0x310: | |
| mpu_port_bits = 0x02; | |
| break; | |
| case 0x320: | |
| mpu_port_bits = 0x01; | |
| break; | |
| case 0x330: | |
| mpu_port_bits = 0x00; | |
| break; | |
| default: | |
| snd_printk(KERN_ERR "MPU-401 port 0x%lx not valid\n", | |
| chip->mpu_port); | |
| goto __skip_mpu; | |
| } | |
| switch (chip->mpu_irq) { | |
| case 5: | |
| mpu_irq_bits = 0x02; | |
| break; | |
| case 7: | |
| mpu_irq_bits = 0x03; | |
| break; | |
| case 9: | |
| mpu_irq_bits = 0x00; | |
| break; | |
| case 10: | |
| mpu_irq_bits = 0x01; | |
| break; | |
| default: | |
| snd_printk(KERN_ERR "MPU-401 irq # %d not valid\n", | |
| chip->mpu_irq); | |
| goto __skip_mpu; | |
| } | |
| snd_miro_write_mask(chip, OPTi9XX_MC_REG(6), | |
| (chip->mpu_port <= 0) ? 0x00 : | |
| 0x80 | mpu_port_bits << 5 | mpu_irq_bits << 3, | |
| 0xf8); | |
| } | |
| __skip_mpu: | |
| return 0; | |
| } | |
| static int snd_miro_opti_check(struct snd_miro *chip) | |
| { | |
| unsigned char value; | |
| chip->res_mc_base = request_region(chip->mc_base, chip->mc_base_size, | |
| "OPTi9xx MC"); | |
| if (chip->res_mc_base == NULL) | |
| return -ENOMEM; | |
| value = snd_miro_read(chip, OPTi9XX_MC_REG(1)); | |
| if (value != 0xff && value != inb(chip->mc_base + OPTi9XX_MC_REG(1))) | |
| if (value == snd_miro_read(chip, OPTi9XX_MC_REG(1))) | |
| return 0; | |
| release_and_free_resource(chip->res_mc_base); | |
| chip->res_mc_base = NULL; | |
| return -ENODEV; | |
| } | |
| static int snd_card_miro_detect(struct snd_card *card, | |
| struct snd_miro *chip) | |
| { | |
| int i, err; | |
| for (i = OPTi9XX_HW_82C929; i <= OPTi9XX_HW_82C924; i++) { | |
| if ((err = snd_miro_init(chip, i)) < 0) | |
| return err; | |
| err = snd_miro_opti_check(chip); | |
| if (err == 0) | |
| return 1; | |
| } | |
| return -ENODEV; | |
| } | |
| static int snd_card_miro_aci_detect(struct snd_card *card, | |
| struct snd_miro *miro) | |
| { | |
| unsigned char regval; | |
| int i; | |
| struct snd_miro_aci *aci = &aci_device; | |
| miro->aci = aci; | |
| mutex_init(&aci->aci_mutex); | |
| /* get ACI port from OPTi9xx MC 4 */ | |
| regval=inb(miro->mc_base + 4); | |
| aci->aci_port = (regval & 0x10) ? 0x344 : 0x354; | |
| miro->res_aci_port = request_region(aci->aci_port, 3, "miro aci"); | |
| if (miro->res_aci_port == NULL) { | |
| snd_printk(KERN_ERR "aci i/o area 0x%lx-0x%lx already used.\n", | |
| aci->aci_port, aci->aci_port+2); | |
| return -ENOMEM; | |
| } | |
| /* force ACI into a known state */ | |
| for (i = 0; i < 3; i++) | |
| if (snd_aci_cmd(aci, ACI_ERROR_OP, -1, -1) < 0) { | |
| snd_printk(KERN_ERR "can't force aci into known state.\n"); | |
| return -ENXIO; | |
| } | |
| aci->aci_vendor = snd_aci_cmd(aci, ACI_READ_IDCODE, -1, -1); | |
| aci->aci_product = snd_aci_cmd(aci, ACI_READ_IDCODE, -1, -1); | |
| if (aci->aci_vendor < 0 || aci->aci_product < 0) { | |
| snd_printk(KERN_ERR "can't read aci id on 0x%lx.\n", | |
| aci->aci_port); | |
| return -ENXIO; | |
| } | |
| aci->aci_version = snd_aci_cmd(aci, ACI_READ_VERSION, -1, -1); | |
| if (aci->aci_version < 0) { | |
| snd_printk(KERN_ERR "can't read aci version on 0x%lx.\n", | |
| aci->aci_port); | |
| return -ENXIO; | |
| } | |
| if (snd_aci_cmd(aci, ACI_INIT, -1, -1) < 0 || | |
| snd_aci_cmd(aci, ACI_ERROR_OP, ACI_ERROR_OP, ACI_ERROR_OP) < 0 || | |
| snd_aci_cmd(aci, ACI_ERROR_OP, ACI_ERROR_OP, ACI_ERROR_OP) < 0) { | |
| snd_printk(KERN_ERR "can't initialize aci.\n"); | |
| return -ENXIO; | |
| } | |
| return 0; | |
| } | |
| static void snd_card_miro_free(struct snd_card *card) | |
| { | |
| struct snd_miro *miro = card->private_data; | |
| release_and_free_resource(miro->res_aci_port); | |
| if (miro->aci) | |
| miro->aci->aci_port = 0; | |
| release_and_free_resource(miro->res_mc_base); | |
| } | |
| static int snd_miro_probe(struct snd_card *card) | |
| { | |
| int error; | |
| struct snd_miro *miro = card->private_data; | |
| struct snd_wss *codec; | |
| struct snd_rawmidi *rmidi; | |
| if (!miro->res_mc_base) { | |
| miro->res_mc_base = request_region(miro->mc_base, | |
| miro->mc_base_size, | |
| "miro (OPTi9xx MC)"); | |
| if (miro->res_mc_base == NULL) { | |
| snd_printk(KERN_ERR "request for OPTI9xx MC failed\n"); | |
| return -ENOMEM; | |
| } | |
| } | |
| error = snd_card_miro_aci_detect(card, miro); | |
| if (error < 0) { | |
| snd_printk(KERN_ERR "unable to detect aci chip\n"); | |
| return -ENODEV; | |
| } | |
| miro->wss_base = port; | |
| miro->mpu_port = mpu_port; | |
| miro->irq = irq; | |
| miro->mpu_irq = mpu_irq; | |
| miro->dma1 = dma1; | |
| miro->dma2 = dma2; | |
| /* init proc interface */ | |
| snd_miro_proc_init(card, miro); | |
| error = snd_miro_configure(miro); | |
| if (error) | |
| return error; | |
| error = snd_wss_create(card, miro->wss_base + 4, -1, | |
| miro->irq, miro->dma1, miro->dma2, | |
| WSS_HW_DETECT, 0, &codec); | |
| if (error < 0) | |
| return error; | |
| error = snd_wss_pcm(codec, 0); | |
| if (error < 0) | |
| return error; | |
| error = snd_wss_mixer(codec); | |
| if (error < 0) | |
| return error; | |
| error = snd_wss_timer(codec, 0); | |
| if (error < 0) | |
| return error; | |
| miro->pcm = codec->pcm; | |
| error = snd_miro_mixer(card, miro); | |
| if (error < 0) | |
| return error; | |
| if (miro->aci->aci_vendor == 'm') { | |
| /* It looks like a miro sound card. */ | |
| switch (miro->aci->aci_product) { | |
| case 'A': | |
| sprintf(card->shortname, | |
| "miroSOUND PCM1 pro / PCM12"); | |
| break; | |
| case 'B': | |
| sprintf(card->shortname, | |
| "miroSOUND PCM12"); | |
| break; | |
| case 'C': | |
| sprintf(card->shortname, | |
| "miroSOUND PCM20 radio"); | |
| break; | |
| default: | |
| sprintf(card->shortname, | |
| "unknown miro"); | |
| snd_printk(KERN_INFO "unknown miro aci id\n"); | |
| break; | |
| } | |
| } else { | |
| snd_printk(KERN_INFO "found unsupported aci card\n"); | |
| sprintf(card->shortname, "unknown Cardinal Technologies"); | |
| } | |
| strcpy(card->driver, "miro"); | |
| sprintf(card->longname, "%s: OPTi%s, %s at 0x%lx, irq %d, dma %d&%d", | |
| card->shortname, miro->name, codec->pcm->name, | |
| miro->wss_base + 4, miro->irq, miro->dma1, miro->dma2); | |
| if (mpu_port <= 0 || mpu_port == SNDRV_AUTO_PORT) | |
| rmidi = NULL; | |
| else { | |
| error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, | |
| mpu_port, 0, miro->mpu_irq, &rmidi); | |
| if (error < 0) | |
| snd_printk(KERN_WARNING "no MPU-401 device at 0x%lx?\n", | |
| mpu_port); | |
| } | |
| if (fm_port > 0 && fm_port != SNDRV_AUTO_PORT) { | |
| struct snd_opl3 *opl3 = NULL; | |
| struct snd_opl4 *opl4; | |
| if (snd_opl4_create(card, fm_port, fm_port - 8, | |
| 2, &opl3, &opl4) < 0) | |
| snd_printk(KERN_WARNING "no OPL4 device at 0x%lx\n", | |
| fm_port); | |
| } | |
| error = snd_set_aci_init_values(miro); | |
| if (error < 0) | |
| return error; | |
| return snd_card_register(card); | |
| } | |
| static int snd_miro_isa_match(struct device *devptr, unsigned int n) | |
| { | |
| #ifdef CONFIG_PNP | |
| if (snd_miro_pnp_is_probed) | |
| return 0; | |
| if (isapnp) | |
| return 0; | |
| #endif | |
| return 1; | |
| } | |
| static int snd_miro_isa_probe(struct device *devptr, unsigned int n) | |
| { | |
| static long possible_ports[] = {0x530, 0xe80, 0xf40, 0x604, -1}; | |
| static long possible_mpu_ports[] = {0x330, 0x300, 0x310, 0x320, -1}; | |
| static int possible_irqs[] = {11, 9, 10, 7, -1}; | |
| static int possible_mpu_irqs[] = {10, 5, 9, 7, -1}; | |
| static int possible_dma1s[] = {3, 1, 0, -1}; | |
| static int possible_dma2s[][2] = { {1, -1}, {0, -1}, {-1, -1}, | |
| {0, -1} }; | |
| int error; | |
| struct snd_miro *miro; | |
| struct snd_card *card; | |
| error = snd_card_new(devptr, index, id, THIS_MODULE, | |
| sizeof(struct snd_miro), &card); | |
| if (error < 0) | |
| return error; | |
| card->private_free = snd_card_miro_free; | |
| miro = card->private_data; | |
| error = snd_card_miro_detect(card, miro); | |
| if (error < 0) { | |
| snd_card_free(card); | |
| snd_printk(KERN_ERR "unable to detect OPTi9xx chip\n"); | |
| return -ENODEV; | |
| } | |
| if (port == SNDRV_AUTO_PORT) { | |
| port = snd_legacy_find_free_ioport(possible_ports, 4); | |
| if (port < 0) { | |
| snd_card_free(card); | |
| snd_printk(KERN_ERR "unable to find a free WSS port\n"); | |
| return -EBUSY; | |
| } | |
| } | |
| if (mpu_port == SNDRV_AUTO_PORT) { | |
| mpu_port = snd_legacy_find_free_ioport(possible_mpu_ports, 2); | |
| if (mpu_port < 0) { | |
| snd_card_free(card); | |
| snd_printk(KERN_ERR | |
| "unable to find a free MPU401 port\n"); | |
| return -EBUSY; | |
| } | |
| } | |
| if (irq == SNDRV_AUTO_IRQ) { | |
| irq = snd_legacy_find_free_irq(possible_irqs); | |
| if (irq < 0) { | |
| snd_card_free(card); | |
| snd_printk(KERN_ERR "unable to find a free IRQ\n"); | |
| return -EBUSY; | |
| } | |
| } | |
| if (mpu_irq == SNDRV_AUTO_IRQ) { | |
| mpu_irq = snd_legacy_find_free_irq(possible_mpu_irqs); | |
| if (mpu_irq < 0) { | |
| snd_card_free(card); | |
| snd_printk(KERN_ERR | |
| "unable to find a free MPU401 IRQ\n"); | |
| return -EBUSY; | |
| } | |
| } | |
| if (dma1 == SNDRV_AUTO_DMA) { | |
| dma1 = snd_legacy_find_free_dma(possible_dma1s); | |
| if (dma1 < 0) { | |
| snd_card_free(card); | |
| snd_printk(KERN_ERR "unable to find a free DMA1\n"); | |
| return -EBUSY; | |
| } | |
| } | |
| if (dma2 == SNDRV_AUTO_DMA) { | |
| dma2 = snd_legacy_find_free_dma(possible_dma2s[dma1 % 4]); | |
| if (dma2 < 0) { | |
| snd_card_free(card); | |
| snd_printk(KERN_ERR "unable to find a free DMA2\n"); | |
| return -EBUSY; | |
| } | |
| } | |
| error = snd_miro_probe(card); | |
| if (error < 0) { | |
| snd_card_free(card); | |
| return error; | |
| } | |
| dev_set_drvdata(devptr, card); | |
| return 0; | |
| } | |
| static int snd_miro_isa_remove(struct device *devptr, | |
| unsigned int dev) | |
| { | |
| snd_card_free(dev_get_drvdata(devptr)); | |
| return 0; | |
| } | |
| #define DEV_NAME "miro" | |
| static struct isa_driver snd_miro_driver = { | |
| .match = snd_miro_isa_match, | |
| .probe = snd_miro_isa_probe, | |
| .remove = snd_miro_isa_remove, | |
| /* FIXME: suspend/resume */ | |
| .driver = { | |
| .name = DEV_NAME | |
| }, | |
| }; | |
| #ifdef CONFIG_PNP | |
| static int snd_card_miro_pnp(struct snd_miro *chip, | |
| struct pnp_card_link *card, | |
| const struct pnp_card_device_id *pid) | |
| { | |
| struct pnp_dev *pdev; | |
| int err; | |
| struct pnp_dev *devmpu; | |
| struct pnp_dev *devmc; | |
| pdev = pnp_request_card_device(card, pid->devs[0].id, NULL); | |
| if (pdev == NULL) | |
| return -EBUSY; | |
| devmpu = pnp_request_card_device(card, pid->devs[1].id, NULL); | |
| if (devmpu == NULL) | |
| return -EBUSY; | |
| devmc = pnp_request_card_device(card, pid->devs[2].id, NULL); | |
| if (devmc == NULL) | |
| return -EBUSY; | |
| err = pnp_activate_dev(pdev); | |
| if (err < 0) { | |
| snd_printk(KERN_ERR "AUDIO pnp configure failure: %d\n", err); | |
| return err; | |
| } | |
| err = pnp_activate_dev(devmc); | |
| if (err < 0) { | |
| snd_printk(KERN_ERR "MC pnp configure failure: %d\n", | |
| err); | |
| return err; | |
| } | |
| port = pnp_port_start(pdev, 1); | |
| fm_port = pnp_port_start(pdev, 2) + 8; | |
| /* | |
| * The MC(0) is never accessed and the miroSOUND PCM20 card does not | |
| * include it in the PnP resource range. OPTI93x include it. | |
| */ | |
| chip->mc_base = pnp_port_start(devmc, 0) - 1; | |
| chip->mc_base_size = pnp_port_len(devmc, 0) + 1; | |
| irq = pnp_irq(pdev, 0); | |
| dma1 = pnp_dma(pdev, 0); | |
| dma2 = pnp_dma(pdev, 1); | |
| if (mpu_port > 0) { | |
| err = pnp_activate_dev(devmpu); | |
| if (err < 0) { | |
| snd_printk(KERN_ERR "MPU401 pnp configure failure\n"); | |
| mpu_port = -1; | |
| return err; | |
| } | |
| mpu_port = pnp_port_start(devmpu, 0); | |
| mpu_irq = pnp_irq(devmpu, 0); | |
| } | |
| return 0; | |
| } | |
| static int snd_miro_pnp_probe(struct pnp_card_link *pcard, | |
| const struct pnp_card_device_id *pid) | |
| { | |
| struct snd_card *card; | |
| int err; | |
| struct snd_miro *miro; | |
| if (snd_miro_pnp_is_probed) | |
| return -EBUSY; | |
| if (!isapnp) | |
| return -ENODEV; | |
| err = snd_card_new(&pcard->card->dev, index, id, THIS_MODULE, | |
| sizeof(struct snd_miro), &card); | |
| if (err < 0) | |
| return err; | |
| card->private_free = snd_card_miro_free; | |
| miro = card->private_data; | |
| err = snd_card_miro_pnp(miro, pcard, pid); | |
| if (err) { | |
| snd_card_free(card); | |
| return err; | |
| } | |
| /* only miroSOUND PCM20 and PCM12 == OPTi924 */ | |
| err = snd_miro_init(miro, OPTi9XX_HW_82C924); | |
| if (err) { | |
| snd_card_free(card); | |
| return err; | |
| } | |
| err = snd_miro_opti_check(miro); | |
| if (err) { | |
| snd_printk(KERN_ERR "OPTI chip not found\n"); | |
| snd_card_free(card); | |
| return err; | |
| } | |
| err = snd_miro_probe(card); | |
| if (err < 0) { | |
| snd_card_free(card); | |
| return err; | |
| } | |
| pnp_set_card_drvdata(pcard, card); | |
| snd_miro_pnp_is_probed = 1; | |
| return 0; | |
| } | |
| static void snd_miro_pnp_remove(struct pnp_card_link *pcard) | |
| { | |
| snd_card_free(pnp_get_card_drvdata(pcard)); | |
| pnp_set_card_drvdata(pcard, NULL); | |
| snd_miro_pnp_is_probed = 0; | |
| } | |
| static struct pnp_card_driver miro_pnpc_driver = { | |
| .flags = PNP_DRIVER_RES_DISABLE, | |
| .name = "miro", | |
| .id_table = snd_miro_pnpids, | |
| .probe = snd_miro_pnp_probe, | |
| .remove = snd_miro_pnp_remove, | |
| }; | |
| #endif | |
| static int __init alsa_card_miro_init(void) | |
| { | |
| #ifdef CONFIG_PNP | |
| pnp_register_card_driver(&miro_pnpc_driver); | |
| if (snd_miro_pnp_is_probed) | |
| return 0; | |
| pnp_unregister_card_driver(&miro_pnpc_driver); | |
| #endif | |
| return isa_register_driver(&snd_miro_driver, 1); | |
| } | |
| static void __exit alsa_card_miro_exit(void) | |
| { | |
| if (!snd_miro_pnp_is_probed) { | |
| isa_unregister_driver(&snd_miro_driver); | |
| return; | |
| } | |
| #ifdef CONFIG_PNP | |
| pnp_unregister_card_driver(&miro_pnpc_driver); | |
| #endif | |
| } | |
| module_init(alsa_card_miro_init) | |
| module_exit(alsa_card_miro_exit) |