| # | |
| # Drm device configuration | |
| # | |
| # This driver provides support for the | |
| # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. | |
| # | |
| menuconfig DRM | |
| tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)" | |
| depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU && HAS_DMA | |
| select HDMI | |
| select FB_CMDLINE | |
| select I2C | |
| select I2C_ALGOBIT | |
| select DMA_SHARED_BUFFER | |
| select SYNC_FILE | |
| help | |
| Kernel-level support for the Direct Rendering Infrastructure (DRI) | |
| introduced in XFree86 4.0. If you say Y here, you need to select | |
| the module that's right for your graphics card from the list below. | |
| These modules provide support for synchronization, security, and | |
| DMA transfers. Please see <http://dri.sourceforge.net/> for more | |
| details. You should also select and configure AGP | |
| (/dev/agpgart) support if it is available for your platform. | |
| config DRM_MIPI_DSI | |
| bool | |
| depends on DRM | |
| config DRM_DP_AUX_CHARDEV | |
| bool "DRM DP AUX Interface" | |
| depends on DRM | |
| help | |
| Choose this option to enable a /dev/drm_dp_auxN node that allows to | |
| read and write values to arbitrary DPCD registers on the DP aux | |
| channel. | |
| config DRM_DEBUG_MM | |
| bool "Insert extra checks and debug info into the DRM range managers" | |
| default n | |
| depends on DRM=y | |
| depends on STACKTRACE_SUPPORT | |
| select STACKDEPOT | |
| help | |
| Enable allocation tracking of memory manager and leak detection on | |
| shutdown. | |
| Recommended for driver developers only. | |
| If in doubt, say "N". | |
| config DRM_KMS_HELPER | |
| tristate | |
| depends on DRM | |
| help | |
| CRTC helpers for KMS drivers. | |
| config DRM_KMS_FB_HELPER | |
| bool | |
| depends on DRM_KMS_HELPER | |
| select FB | |
| select FRAMEBUFFER_CONSOLE if !EXPERT | |
| select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE | |
| select FB_SYS_FOPS | |
| select FB_SYS_FILLRECT | |
| select FB_SYS_COPYAREA | |
| select FB_SYS_IMAGEBLIT | |
| select FB_CFB_FILLRECT | |
| select FB_CFB_COPYAREA | |
| select FB_CFB_IMAGEBLIT | |
| select FB_DEFERRED_IO | |
| help | |
| FBDEV helpers for KMS drivers. | |
| config DRM_FBDEV_EMULATION | |
| bool "Enable legacy fbdev support for your modesetting driver" | |
| depends on DRM | |
| select DRM_KMS_HELPER | |
| select DRM_KMS_FB_HELPER | |
| default y | |
| help | |
| Choose this option if you have a need for the legacy fbdev | |
| support. Note that this support also provides the linux console | |
| support on top of your modesetting driver. | |
| If in doubt, say "Y". | |
| config DRM_LOAD_EDID_FIRMWARE | |
| bool "Allow to specify an EDID data set instead of probing for it" | |
| depends on DRM_KMS_HELPER | |
| help | |
| Say Y here, if you want to use EDID data to be loaded from the | |
| /lib/firmware directory or one of the provided built-in | |
| data sets. This may be necessary, if the graphics adapter or | |
| monitor are unable to provide appropriate EDID data. Since this | |
| feature is provided as a workaround for broken hardware, the | |
| default case is N. Details and instructions how to build your own | |
| EDID data are given in Documentation/EDID/HOWTO.txt. | |
| config DRM_TTM | |
| tristate | |
| depends on DRM | |
| help | |
| GPU memory management subsystem for devices with multiple | |
| GPU memory types. Will be enabled automatically if a device driver | |
| uses it. | |
| config DRM_GEM_CMA_HELPER | |
| bool | |
| depends on DRM | |
| help | |
| Choose this if you need the GEM CMA helper functions | |
| config DRM_KMS_CMA_HELPER | |
| bool | |
| depends on DRM | |
| select DRM_GEM_CMA_HELPER | |
| select DRM_KMS_FB_HELPER | |
| select FB_SYS_FILLRECT | |
| select FB_SYS_COPYAREA | |
| select FB_SYS_IMAGEBLIT | |
| help | |
| Choose this if you need the KMS CMA helper functions | |
| source "drivers/gpu/drm/i2c/Kconfig" | |
| source "drivers/gpu/drm/arm/Kconfig" | |
| config DRM_RADEON | |
| tristate "ATI Radeon" | |
| depends on DRM && PCI | |
| select FW_LOADER | |
| select DRM_KMS_HELPER | |
| select DRM_TTM | |
| select POWER_SUPPLY | |
| select HWMON | |
| select BACKLIGHT_CLASS_DEVICE | |
| select BACKLIGHT_LCD_SUPPORT | |
| select INTERVAL_TREE | |
| help | |
| Choose this option if you have an ATI Radeon graphics card. There | |
| are both PCI and AGP versions. You don't need to choose this to | |
| run the Radeon in plain VGA mode. | |
| If M is selected, the module will be called radeon. | |
| source "drivers/gpu/drm/radeon/Kconfig" | |
| config DRM_AMDGPU | |
| tristate "AMD GPU" | |
| depends on DRM && PCI | |
| select FW_LOADER | |
| select DRM_KMS_HELPER | |
| select DRM_TTM | |
| select POWER_SUPPLY | |
| select HWMON | |
| select BACKLIGHT_CLASS_DEVICE | |
| select BACKLIGHT_LCD_SUPPORT | |
| select INTERVAL_TREE | |
| help | |
| Choose this option if you have a recent AMD Radeon graphics card. | |
| If M is selected, the module will be called amdgpu. | |
| source "drivers/gpu/drm/amd/amdgpu/Kconfig" | |
| source "drivers/gpu/drm/nouveau/Kconfig" | |
| source "drivers/gpu/drm/i915/Kconfig" | |
| config DRM_VGEM | |
| tristate "Virtual GEM provider" | |
| depends on DRM | |
| help | |
| Choose this option to get a virtual graphics memory manager, | |
| as used by Mesa's software renderer for enhanced performance. | |
| If M is selected the module will be called vgem. | |
| source "drivers/gpu/drm/exynos/Kconfig" | |
| source "drivers/gpu/drm/rockchip/Kconfig" | |
| source "drivers/gpu/drm/vmwgfx/Kconfig" | |
| source "drivers/gpu/drm/gma500/Kconfig" | |
| source "drivers/gpu/drm/udl/Kconfig" | |
| source "drivers/gpu/drm/ast/Kconfig" | |
| source "drivers/gpu/drm/mgag200/Kconfig" | |
| source "drivers/gpu/drm/cirrus/Kconfig" | |
| source "drivers/gpu/drm/armada/Kconfig" | |
| source "drivers/gpu/drm/atmel-hlcdc/Kconfig" | |
| source "drivers/gpu/drm/rcar-du/Kconfig" | |
| source "drivers/gpu/drm/shmobile/Kconfig" | |
| source "drivers/gpu/drm/sun4i/Kconfig" | |
| source "drivers/gpu/drm/omapdrm/Kconfig" | |
| source "drivers/gpu/drm/tilcdc/Kconfig" | |
| source "drivers/gpu/drm/qxl/Kconfig" | |
| source "drivers/gpu/drm/bochs/Kconfig" | |
| source "drivers/gpu/drm/virtio/Kconfig" | |
| source "drivers/gpu/drm/msm/Kconfig" | |
| source "drivers/gpu/drm/fsl-dcu/Kconfig" | |
| source "drivers/gpu/drm/tegra/Kconfig" | |
| source "drivers/gpu/drm/panel/Kconfig" | |
| source "drivers/gpu/drm/bridge/Kconfig" | |
| source "drivers/gpu/drm/sti/Kconfig" | |
| source "drivers/gpu/drm/amd/amdkfd/Kconfig" | |
| source "drivers/gpu/drm/imx/Kconfig" | |
| source "drivers/gpu/drm/vc4/Kconfig" | |
| source "drivers/gpu/drm/etnaviv/Kconfig" | |
| source "drivers/gpu/drm/arc/Kconfig" | |
| source "drivers/gpu/drm/hisilicon/Kconfig" | |
| source "drivers/gpu/drm/mediatek/Kconfig" | |
| source "drivers/gpu/drm/zte/Kconfig" | |
| source "drivers/gpu/drm/mxsfb/Kconfig" | |
| source "drivers/gpu/drm/meson/Kconfig" | |
| # Keep legacy drivers last | |
| menuconfig DRM_LEGACY | |
| bool "Enable legacy drivers (DANGEROUS)" | |
| depends on DRM | |
| help | |
| Enable legacy DRI1 drivers. Those drivers expose unsafe and dangerous | |
| APIs to user-space, which can be used to circumvent access | |
| restrictions and other security measures. For backwards compatibility | |
| those drivers are still available, but their use is highly | |
| inadvisable and might harm your system. | |
| You are recommended to use the safe modeset-only drivers instead, and | |
| perform 3D emulation in user-space. | |
| Unless you have strong reasons to go rogue, say "N". | |
| if DRM_LEGACY | |
| config DRM_TDFX | |
| tristate "3dfx Banshee/Voodoo3+" | |
| depends on DRM && PCI | |
| help | |
| Choose this option if you have a 3dfx Banshee or Voodoo3 (or later), | |
| graphics card. If M is selected, the module will be called tdfx. | |
| config DRM_R128 | |
| tristate "ATI Rage 128" | |
| depends on DRM && PCI | |
| select FW_LOADER | |
| help | |
| Choose this option if you have an ATI Rage 128 graphics card. If M | |
| is selected, the module will be called r128. AGP support for | |
| this card is strongly suggested (unless you have a PCI version). | |
| config DRM_I810 | |
| tristate "Intel I810" | |
| # !PREEMPT because of missing ioctl locking | |
| depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN) | |
| help | |
| Choose this option if you have an Intel I810 graphics card. If M is | |
| selected, the module will be called i810. AGP support is required | |
| for this driver to work. | |
| config DRM_MGA | |
| tristate "Matrox g200/g400" | |
| depends on DRM && PCI | |
| select FW_LOADER | |
| help | |
| Choose this option if you have a Matrox G200, G400 or G450 graphics | |
| card. If M is selected, the module will be called mga. AGP | |
| support is required for this driver to work. | |
| config DRM_SIS | |
| tristate "SiS video cards" | |
| depends on DRM && AGP | |
| depends on FB_SIS || FB_SIS=n | |
| help | |
| Choose this option if you have a SiS 630 or compatible video | |
| chipset. If M is selected the module will be called sis. AGP | |
| support is required for this driver to work. | |
| config DRM_VIA | |
| tristate "Via unichrome video cards" | |
| depends on DRM && PCI | |
| help | |
| Choose this option if you have a Via unichrome or compatible video | |
| chipset. If M is selected the module will be called via. | |
| config DRM_SAVAGE | |
| tristate "Savage video cards" | |
| depends on DRM && PCI | |
| help | |
| Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister | |
| chipset. If M is selected the module will be called savage. | |
| endif # DRM_LEGACY |