| /* linux/arch/arm/mach-s5pv210/dma.c | |
| * | |
| * Copyright (c) 2011 Samsung Electronics Co., Ltd. | |
| * http://www.samsung.com | |
| * | |
| * Copyright (C) 2010 Samsung Electronics Co. Ltd. | |
| * Jaswinder Singh <jassi.brar@samsung.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include <linux/dma-mapping.h> | |
| #include <linux/amba/bus.h> | |
| #include <linux/amba/pl330.h> | |
| #include <asm/irq.h> | |
| #include <plat/devs.h> | |
| #include <plat/irqs.h> | |
| #include <mach/map.h> | |
| #include <mach/irqs.h> | |
| #include <mach/dma.h> | |
| static u8 pdma0_peri[] = { | |
| DMACH_UART0_RX, | |
| DMACH_UART0_TX, | |
| DMACH_UART1_RX, | |
| DMACH_UART1_TX, | |
| DMACH_UART2_RX, | |
| DMACH_UART2_TX, | |
| DMACH_UART3_RX, | |
| DMACH_UART3_TX, | |
| DMACH_MAX, | |
| DMACH_I2S0_RX, | |
| DMACH_I2S0_TX, | |
| DMACH_I2S0S_TX, | |
| DMACH_I2S1_RX, | |
| DMACH_I2S1_TX, | |
| DMACH_MAX, | |
| DMACH_MAX, | |
| DMACH_SPI0_RX, | |
| DMACH_SPI0_TX, | |
| DMACH_SPI1_RX, | |
| DMACH_SPI1_TX, | |
| DMACH_MAX, | |
| DMACH_MAX, | |
| DMACH_AC97_MICIN, | |
| DMACH_AC97_PCMIN, | |
| DMACH_AC97_PCMOUT, | |
| DMACH_MAX, | |
| DMACH_PWM, | |
| DMACH_SPDIF, | |
| }; | |
| static struct dma_pl330_platdata s5pv210_pdma0_pdata = { | |
| .nr_valid_peri = ARRAY_SIZE(pdma0_peri), | |
| .peri_id = pdma0_peri, | |
| }; | |
| static AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330, | |
| S5PV210_PA_PDMA0, {IRQ_PDMA0}, &s5pv210_pdma0_pdata); | |
| static u8 pdma1_peri[] = { | |
| DMACH_UART0_RX, | |
| DMACH_UART0_TX, | |
| DMACH_UART1_RX, | |
| DMACH_UART1_TX, | |
| DMACH_UART2_RX, | |
| DMACH_UART2_TX, | |
| DMACH_UART3_RX, | |
| DMACH_UART3_TX, | |
| DMACH_MAX, | |
| DMACH_I2S0_RX, | |
| DMACH_I2S0_TX, | |
| DMACH_I2S0S_TX, | |
| DMACH_I2S1_RX, | |
| DMACH_I2S1_TX, | |
| DMACH_I2S2_RX, | |
| DMACH_I2S2_TX, | |
| DMACH_SPI0_RX, | |
| DMACH_SPI0_TX, | |
| DMACH_SPI1_RX, | |
| DMACH_SPI1_TX, | |
| DMACH_MAX, | |
| DMACH_MAX, | |
| DMACH_PCM0_RX, | |
| DMACH_PCM0_TX, | |
| DMACH_PCM1_RX, | |
| DMACH_PCM1_TX, | |
| DMACH_MSM_REQ0, | |
| DMACH_MSM_REQ1, | |
| DMACH_MSM_REQ2, | |
| DMACH_MSM_REQ3, | |
| DMACH_PCM2_RX, | |
| DMACH_PCM2_TX, | |
| }; | |
| static struct dma_pl330_platdata s5pv210_pdma1_pdata = { | |
| .nr_valid_peri = ARRAY_SIZE(pdma1_peri), | |
| .peri_id = pdma1_peri, | |
| }; | |
| static AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330, | |
| S5PV210_PA_PDMA1, {IRQ_PDMA1}, &s5pv210_pdma1_pdata); | |
| static int __init s5pv210_dma_init(void) | |
| { | |
| dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask); | |
| dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask); | |
| amba_device_register(&s5pv210_pdma0_device, &iomem_resource); | |
| dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask); | |
| dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask); | |
| amba_device_register(&s5pv210_pdma1_device, &iomem_resource); | |
| return 0; | |
| } | |
| arch_initcall(s5pv210_dma_init); |