| /* | |
| * FocalTech FT6236 TouchScreen driver. | |
| * | |
| * Copyright (c) 2010 Focal tech Ltd. | |
| * | |
| * This software is licensed under the terms of the GNU General Public | |
| * License version 2, as published by the Free Software Foundation, and | |
| * may be copied, distributed, and modified under those terms. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/i2c.h> | |
| #include <linux/input.h> | |
| #include <linux/input/mt.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/module.h> | |
| #include <linux/property.h> | |
| #define FT6236_MAX_TOUCH_POINTS 2 | |
| #define FT6236_REG_TH_GROUP 0x80 | |
| #define FT6236_REG_PERIODACTIVE 0x88 | |
| #define FT6236_REG_LIB_VER_H 0xa1 | |
| #define FT6236_REG_LIB_VER_L 0xa2 | |
| #define FT6236_REG_CIPHER 0xa3 | |
| #define FT6236_REG_FIRMID 0xa6 | |
| #define FT6236_REG_FOCALTECH_ID 0xa8 | |
| #define FT6236_REG_RELEASE_CODE_ID 0xaf | |
| #define FT6236_EVENT_PRESS_DOWN 0 | |
| #define FT6236_EVENT_LIFT_UP 1 | |
| #define FT6236_EVENT_CONTACT 2 | |
| #define FT6236_EVENT_NO_EVENT 3 | |
| struct ft6236_data { | |
| struct i2c_client *client; | |
| struct input_dev *input; | |
| struct gpio_desc *reset_gpio; | |
| u32 max_x; | |
| u32 max_y; | |
| bool invert_x; | |
| bool invert_y; | |
| bool swap_xy; | |
| }; | |
| /* | |
| * This struct is a touchpoint as stored in hardware. Note that the id, | |
| * as well as the event, are stored in the upper nybble of the hi byte. | |
| */ | |
| struct ft6236_touchpoint { | |
| union { | |
| u8 xhi; | |
| u8 event; | |
| }; | |
| u8 xlo; | |
| union { | |
| u8 yhi; | |
| u8 id; | |
| }; | |
| u8 ylo; | |
| u8 weight; | |
| u8 misc; | |
| } __packed; | |
| /* This packet represents the register map as read from offset 0 */ | |
| struct ft6236_packet { | |
| u8 dev_mode; | |
| u8 gest_id; | |
| u8 touches; | |
| struct ft6236_touchpoint points[FT6236_MAX_TOUCH_POINTS]; | |
| } __packed; | |
| static int ft6236_read(struct i2c_client *client, u8 reg, u8 len, void *data) | |
| { | |
| int error; | |
| error = i2c_smbus_read_i2c_block_data(client, reg, len, data); | |
| if (error < 0) | |
| return error; | |
| if (error != len) | |
| return -EIO; | |
| return 0; | |
| } | |
| static irqreturn_t ft6236_interrupt(int irq, void *dev_id) | |
| { | |
| struct ft6236_data *ft6236 = dev_id; | |
| struct device *dev = &ft6236->client->dev; | |
| struct input_dev *input = ft6236->input; | |
| struct ft6236_packet buf; | |
| u8 touches; | |
| int i, error; | |
| error = ft6236_read(ft6236->client, 0, sizeof(buf), &buf); | |
| if (error) { | |
| dev_err(dev, "read touchdata failed %d\n", error); | |
| return IRQ_HANDLED; | |
| } | |
| touches = buf.touches & 0xf; | |
| if (touches > FT6236_MAX_TOUCH_POINTS) { | |
| dev_dbg(dev, | |
| "%d touch points reported, only %d are supported\n", | |
| touches, FT6236_MAX_TOUCH_POINTS); | |
| touches = FT6236_MAX_TOUCH_POINTS; | |
| } | |
| for (i = 0; i < touches; i++) { | |
| struct ft6236_touchpoint *point = &buf.points[i]; | |
| u16 x = ((point->xhi & 0xf) << 8) | buf.points[i].xlo; | |
| u16 y = ((point->yhi & 0xf) << 8) | buf.points[i].ylo; | |
| u8 event = point->event >> 6; | |
| u8 id = point->id >> 4; | |
| bool act = (event == FT6236_EVENT_PRESS_DOWN || | |
| event == FT6236_EVENT_CONTACT); | |
| input_mt_slot(input, id); | |
| input_mt_report_slot_state(input, MT_TOOL_FINGER, act); | |
| if (!act) | |
| continue; | |
| if (ft6236->invert_x) | |
| x = ft6236->max_x - x; | |
| if (ft6236->invert_y) | |
| y = ft6236->max_y - y; | |
| if (ft6236->swap_xy) { | |
| input_report_abs(input, ABS_MT_POSITION_X, y); | |
| input_report_abs(input, ABS_MT_POSITION_Y, x); | |
| } else { | |
| input_report_abs(input, ABS_MT_POSITION_X, x); | |
| input_report_abs(input, ABS_MT_POSITION_Y, y); | |
| } | |
| } | |
| input_mt_sync_frame(input); | |
| input_sync(input); | |
| return IRQ_HANDLED; | |
| } | |
| static u8 ft6236_debug_read_byte(struct ft6236_data *ft6236, u8 reg) | |
| { | |
| struct i2c_client *client = ft6236->client; | |
| u8 val = 0; | |
| int error; | |
| error = ft6236_read(client, reg, 1, &val); | |
| if (error) | |
| dev_dbg(&client->dev, | |
| "error reading register 0x%02x: %d\n", reg, error); | |
| return val; | |
| } | |
| static void ft6236_debug_info(struct ft6236_data *ft6236) | |
| { | |
| struct device *dev = &ft6236->client->dev; | |
| dev_dbg(dev, "Touch threshold is %d\n", | |
| ft6236_debug_read_byte(ft6236, FT6236_REG_TH_GROUP) * 4); | |
| dev_dbg(dev, "Report rate is %dHz\n", | |
| ft6236_debug_read_byte(ft6236, FT6236_REG_PERIODACTIVE) * 10); | |
| dev_dbg(dev, "Firmware library version 0x%02x%02x\n", | |
| ft6236_debug_read_byte(ft6236, FT6236_REG_LIB_VER_H), | |
| ft6236_debug_read_byte(ft6236, FT6236_REG_LIB_VER_L)); | |
| dev_dbg(dev, "Firmware version 0x%02x\n", | |
| ft6236_debug_read_byte(ft6236, FT6236_REG_FIRMID)); | |
| dev_dbg(dev, "Chip vendor ID 0x%02x\n", | |
| ft6236_debug_read_byte(ft6236, FT6236_REG_CIPHER)); | |
| dev_dbg(dev, "CTPM vendor ID 0x%02x\n", | |
| ft6236_debug_read_byte(ft6236, FT6236_REG_FOCALTECH_ID)); | |
| dev_dbg(dev, "Release code version 0x%02x\n", | |
| ft6236_debug_read_byte(ft6236, FT6236_REG_RELEASE_CODE_ID)); | |
| } | |
| static void ft6236_reset(struct ft6236_data *ft6236) | |
| { | |
| if (!ft6236->reset_gpio) | |
| return; | |
| gpiod_set_value_cansleep(ft6236->reset_gpio, 1); | |
| usleep_range(5000, 20000); | |
| gpiod_set_value_cansleep(ft6236->reset_gpio, 0); | |
| msleep(300); | |
| } | |
| static int ft6236_probe(struct i2c_client *client, | |
| const struct i2c_device_id *id) | |
| { | |
| struct device *dev = &client->dev; | |
| struct ft6236_data *ft6236; | |
| struct input_dev *input; | |
| u32 fuzz_x = 0, fuzz_y = 0; | |
| u8 val; | |
| int error; | |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) | |
| return -ENXIO; | |
| if (!client->irq) { | |
| dev_err(dev, "irq is missing\n"); | |
| return -EINVAL; | |
| } | |
| ft6236 = devm_kzalloc(dev, sizeof(*ft6236), GFP_KERNEL); | |
| if (!ft6236) | |
| return -ENOMEM; | |
| ft6236->client = client; | |
| ft6236->reset_gpio = devm_gpiod_get_optional(dev, "reset", | |
| GPIOD_OUT_LOW); | |
| if (IS_ERR(ft6236->reset_gpio)) { | |
| error = PTR_ERR(ft6236->reset_gpio); | |
| if (error != -EPROBE_DEFER) | |
| dev_err(dev, "error getting reset gpio: %d\n", error); | |
| return error; | |
| } | |
| ft6236_reset(ft6236); | |
| /* verify that the controller is present */ | |
| error = ft6236_read(client, 0x00, 1, &val); | |
| if (error) { | |
| dev_err(dev, "failed to read from controller: %d\n", error); | |
| return error; | |
| } | |
| ft6236_debug_info(ft6236); | |
| input = devm_input_allocate_device(dev); | |
| if (!input) | |
| return -ENOMEM; | |
| ft6236->input = input; | |
| input->name = client->name; | |
| input->id.bustype = BUS_I2C; | |
| if (device_property_read_u32(dev, "touchscreen-size-x", | |
| &ft6236->max_x) || | |
| device_property_read_u32(dev, "touchscreen-size-y", | |
| &ft6236->max_y)) { | |
| dev_err(dev, "touchscreen-size-x and/or -y missing\n"); | |
| return -EINVAL; | |
| } | |
| device_property_read_u32(dev, "touchscreen-fuzz-x", &fuzz_x); | |
| device_property_read_u32(dev, "touchscreen-fuzz-y", &fuzz_y); | |
| ft6236->invert_x = device_property_read_bool(dev, | |
| "touchscreen-inverted-x"); | |
| ft6236->invert_y = device_property_read_bool(dev, | |
| "touchscreen-inverted-y"); | |
| ft6236->swap_xy = device_property_read_bool(dev, | |
| "touchscreen-swapped-x-y"); | |
| if (ft6236->swap_xy) { | |
| input_set_abs_params(input, ABS_MT_POSITION_X, 0, | |
| ft6236->max_y, fuzz_y, 0); | |
| input_set_abs_params(input, ABS_MT_POSITION_Y, 0, | |
| ft6236->max_x, fuzz_x, 0); | |
| } else { | |
| input_set_abs_params(input, ABS_MT_POSITION_X, 0, | |
| ft6236->max_x, fuzz_x, 0); | |
| input_set_abs_params(input, ABS_MT_POSITION_Y, 0, | |
| ft6236->max_y, fuzz_y, 0); | |
| } | |
| error = input_mt_init_slots(input, FT6236_MAX_TOUCH_POINTS, | |
| INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); | |
| if (error) | |
| return error; | |
| error = devm_request_threaded_irq(dev, client->irq, NULL, | |
| ft6236_interrupt, IRQF_ONESHOT, | |
| client->name, ft6236); | |
| if (error) { | |
| dev_err(dev, "request irq %d failed: %d\n", client->irq, error); | |
| return error; | |
| } | |
| error = input_register_device(input); | |
| if (error) { | |
| dev_err(dev, "failed to register input device: %d\n", error); | |
| return error; | |
| } | |
| return 0; | |
| } | |
| #ifdef CONFIG_OF | |
| static const struct of_device_id ft6236_of_match[] = { | |
| { .compatible = "focaltech,ft6236", }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, ft6236_of_match); | |
| #endif | |
| static const struct i2c_device_id ft6236_id[] = { | |
| { "ft6236", }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, ft6236_id); | |
| static struct i2c_driver ft6236_driver = { | |
| .driver = { | |
| .name = "ft6236", | |
| .of_match_table = of_match_ptr(ft6236_of_match), | |
| }, | |
| .probe = ft6236_probe, | |
| .id_table = ft6236_id, | |
| }; | |
| module_i2c_driver(ft6236_driver); | |
| MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>"); | |
| MODULE_AUTHOR("Noralf Trønnes <noralf@tronnes.org>"); | |
| MODULE_DESCRIPTION("FocalTech FT6236 TouchScreen driver"); | |
| MODULE_LICENSE("GPL v2"); |