| // SPDX-License-Identifier: GPL-2.0 | |
| #include <linux/kernel.h> | |
| #include <linux/of.h> | |
| #include <linux/of_device.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_iommu.h> | |
| #include <linux/of_reserved_mem.h> | |
| #include <linux/dma-direct.h> /* for bus_dma_region */ | |
| #include <linux/dma-map-ops.h> | |
| #include <linux/init.h> | |
| #include <linux/mod_devicetable.h> | |
| #include <linux/slab.h> | |
| #include <linux/platform_device.h> | |
| #include <asm/errno.h> | |
| #include "of_private.h" | |
| /** | |
| * of_match_device - Tell if a struct device matches an of_device_id list | |
| * @matches: array of of device match structures to search in | |
| * @dev: the of device structure to match against | |
| * | |
| * Used by a driver to check whether an platform_device present in the | |
| * system is in its list of supported devices. | |
| */ | |
| const struct of_device_id *of_match_device(const struct of_device_id *matches, | |
| const struct device *dev) | |
| { | |
| if (!matches || !dev->of_node || dev->of_node_reused) | |
| return NULL; | |
| return of_match_node(matches, dev->of_node); | |
| } | |
| EXPORT_SYMBOL(of_match_device); | |
| static void | |
| of_dma_set_restricted_buffer(struct device *dev, struct device_node *np) | |
| { | |
| struct device_node *node, *of_node = dev->of_node; | |
| int count, i; | |
| if (!IS_ENABLED(CONFIG_DMA_RESTRICTED_POOL)) | |
| return; | |
| count = of_property_count_elems_of_size(of_node, "memory-region", | |
| sizeof(u32)); | |
| /* | |
| * If dev->of_node doesn't exist or doesn't contain memory-region, try | |
| * the OF node having DMA configuration. | |
| */ | |
| if (count <= 0) { | |
| of_node = np; | |
| count = of_property_count_elems_of_size( | |
| of_node, "memory-region", sizeof(u32)); | |
| } | |
| for (i = 0; i < count; i++) { | |
| node = of_parse_phandle(of_node, "memory-region", i); | |
| /* | |
| * There might be multiple memory regions, but only one | |
| * restricted-dma-pool region is allowed. | |
| */ | |
| if (of_device_is_compatible(node, "restricted-dma-pool") && | |
| of_device_is_available(node)) { | |
| of_node_put(node); | |
| break; | |
| } | |
| of_node_put(node); | |
| } | |
| /* | |
| * Attempt to initialize a restricted-dma-pool region if one was found. | |
| * Note that count can hold a negative error code. | |
| */ | |
| if (i < count && of_reserved_mem_device_init_by_idx(dev, of_node, i)) | |
| dev_warn(dev, "failed to initialise \"restricted-dma-pool\" memory node\n"); | |
| } | |
| /** | |
| * of_dma_configure_id - Setup DMA configuration | |
| * @dev: Device to apply DMA configuration | |
| * @np: Pointer to OF node having DMA configuration | |
| * @force_dma: Whether device is to be set up by of_dma_configure() even if | |
| * DMA capability is not explicitly described by firmware. | |
| * @id: Optional const pointer value input id | |
| * | |
| * Try to get devices's DMA configuration from DT and update it | |
| * accordingly. | |
| * | |
| * If platform code needs to use its own special DMA configuration, it | |
| * can use a platform bus notifier and handle BUS_NOTIFY_ADD_DEVICE events | |
| * to fix up DMA configuration. | |
| */ | |
| int of_dma_configure_id(struct device *dev, struct device_node *np, | |
| bool force_dma, const u32 *id) | |
| { | |
| const struct iommu_ops *iommu; | |
| const struct bus_dma_region *map = NULL; | |
| struct device_node *bus_np; | |
| u64 dma_start = 0; | |
| u64 mask, end, size = 0; | |
| bool coherent; | |
| int ret; | |
| if (np == dev->of_node) | |
| bus_np = __of_get_dma_parent(np); | |
| else | |
| bus_np = of_node_get(np); | |
| ret = of_dma_get_range(bus_np, &map); | |
| of_node_put(bus_np); | |
| if (ret < 0) { | |
| /* | |
| * For legacy reasons, we have to assume some devices need | |
| * DMA configuration regardless of whether "dma-ranges" is | |
| * correctly specified or not. | |
| */ | |
| if (!force_dma) | |
| return ret == -ENODEV ? 0 : ret; | |
| } else { | |
| const struct bus_dma_region *r = map; | |
| u64 dma_end = 0; | |
| /* Determine the overall bounds of all DMA regions */ | |
| for (dma_start = ~0; r->size; r++) { | |
| /* Take lower and upper limits */ | |
| if (r->dma_start < dma_start) | |
| dma_start = r->dma_start; | |
| if (r->dma_start + r->size > dma_end) | |
| dma_end = r->dma_start + r->size; | |
| } | |
| size = dma_end - dma_start; | |
| /* | |
| * Add a work around to treat the size as mask + 1 in case | |
| * it is defined in DT as a mask. | |
| */ | |
| if (size & 1) { | |
| dev_warn(dev, "Invalid size 0x%llx for dma-range(s)\n", | |
| size); | |
| size = size + 1; | |
| } | |
| if (!size) { | |
| dev_err(dev, "Adjusted size 0x%llx invalid\n", size); | |
| kfree(map); | |
| return -EINVAL; | |
| } | |
| } | |
| /* | |
| * If @dev is expected to be DMA-capable then the bus code that created | |
| * it should have initialised its dma_mask pointer by this point. For | |
| * now, we'll continue the legacy behaviour of coercing it to the | |
| * coherent mask if not, but we'll no longer do so quietly. | |
| */ | |
| if (!dev->dma_mask) { | |
| dev_warn(dev, "DMA mask not set\n"); | |
| dev->dma_mask = &dev->coherent_dma_mask; | |
| } | |
| if (!size && dev->coherent_dma_mask) | |
| size = max(dev->coherent_dma_mask, dev->coherent_dma_mask + 1); | |
| else if (!size) | |
| size = 1ULL << 32; | |
| /* | |
| * Limit coherent and dma mask based on size and default mask | |
| * set by the driver. | |
| */ | |
| end = dma_start + size - 1; | |
| mask = DMA_BIT_MASK(ilog2(end) + 1); | |
| dev->coherent_dma_mask &= mask; | |
| *dev->dma_mask &= mask; | |
| /* ...but only set bus limit and range map if we found valid dma-ranges earlier */ | |
| if (!ret) { | |
| dev->bus_dma_limit = end; | |
| dev->dma_range_map = map; | |
| } | |
| coherent = of_dma_is_coherent(np); | |
| dev_dbg(dev, "device is%sdma coherent\n", | |
| coherent ? " " : " not "); | |
| iommu = of_iommu_configure(dev, np, id); | |
| if (PTR_ERR(iommu) == -EPROBE_DEFER) { | |
| /* Don't touch range map if it wasn't set from a valid dma-ranges */ | |
| if (!ret) | |
| dev->dma_range_map = NULL; | |
| kfree(map); | |
| return -EPROBE_DEFER; | |
| } | |
| dev_dbg(dev, "device is%sbehind an iommu\n", | |
| iommu ? " " : " not "); | |
| arch_setup_dma_ops(dev, dma_start, size, iommu, coherent); | |
| if (!iommu) | |
| of_dma_set_restricted_buffer(dev, np); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(of_dma_configure_id); | |
| const void *of_device_get_match_data(const struct device *dev) | |
| { | |
| const struct of_device_id *match; | |
| match = of_match_device(dev->driver->of_match_table, dev); | |
| if (!match) | |
| return NULL; | |
| return match->data; | |
| } | |
| EXPORT_SYMBOL(of_device_get_match_data); | |
| /** | |
| * of_device_modalias - Fill buffer with newline terminated modalias string | |
| * @dev: Calling device | |
| * @str: Modalias string | |
| * @len: Size of @str | |
| */ | |
| ssize_t of_device_modalias(struct device *dev, char *str, ssize_t len) | |
| { | |
| ssize_t sl; | |
| if (!dev || !dev->of_node || dev->of_node_reused) | |
| return -ENODEV; | |
| sl = of_modalias(dev->of_node, str, len - 2); | |
| if (sl < 0) | |
| return sl; | |
| if (sl > len - 2) | |
| return -ENOMEM; | |
| str[sl++] = '\n'; | |
| str[sl] = 0; | |
| return sl; | |
| } | |
| EXPORT_SYMBOL_GPL(of_device_modalias); | |
| /** | |
| * of_device_uevent - Display OF related uevent information | |
| * @dev: Device to display the uevent information for | |
| * @env: Kernel object's userspace event reference to fill up | |
| */ | |
| void of_device_uevent(const struct device *dev, struct kobj_uevent_env *env) | |
| { | |
| const char *compat, *type; | |
| struct alias_prop *app; | |
| struct property *p; | |
| int seen = 0; | |
| if ((!dev) || (!dev->of_node)) | |
| return; | |
| add_uevent_var(env, "OF_NAME=%pOFn", dev->of_node); | |
| add_uevent_var(env, "OF_FULLNAME=%pOF", dev->of_node); | |
| type = of_node_get_device_type(dev->of_node); | |
| if (type) | |
| add_uevent_var(env, "OF_TYPE=%s", type); | |
| /* Since the compatible field can contain pretty much anything | |
| * it's not really legal to split it out with commas. We split it | |
| * up using a number of environment variables instead. */ | |
| of_property_for_each_string(dev->of_node, "compatible", p, compat) { | |
| add_uevent_var(env, "OF_COMPATIBLE_%d=%s", seen, compat); | |
| seen++; | |
| } | |
| add_uevent_var(env, "OF_COMPATIBLE_N=%d", seen); | |
| seen = 0; | |
| mutex_lock(&of_mutex); | |
| list_for_each_entry(app, &aliases_lookup, link) { | |
| if (dev->of_node == app->np) { | |
| add_uevent_var(env, "OF_ALIAS_%d=%s", seen, | |
| app->alias); | |
| seen++; | |
| } | |
| } | |
| mutex_unlock(&of_mutex); | |
| } | |
| EXPORT_SYMBOL_GPL(of_device_uevent); | |
| int of_device_uevent_modalias(const struct device *dev, struct kobj_uevent_env *env) | |
| { | |
| int sl; | |
| if ((!dev) || (!dev->of_node) || dev->of_node_reused) | |
| return -ENODEV; | |
| /* Devicetree modalias is tricky, we add it in 2 steps */ | |
| if (add_uevent_var(env, "MODALIAS=")) | |
| return -ENOMEM; | |
| sl = of_modalias(dev->of_node, &env->buf[env->buflen-1], | |
| sizeof(env->buf) - env->buflen); | |
| if (sl < 0) | |
| return sl; | |
| if (sl >= (sizeof(env->buf) - env->buflen)) | |
| return -ENOMEM; | |
| env->buflen += sl; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(of_device_uevent_modalias); |