| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Xen time implementation. | |
| * | |
| * This is implemented in terms of a clocksource driver which uses | |
| * the hypervisor clock as a nanosecond timebase, and a clockevent | |
| * driver which uses the hypervisor's timer mechanism. | |
| * | |
| * Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007 | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/clocksource.h> | |
| #include <linux/clockchips.h> | |
| #include <linux/gfp.h> | |
| #include <linux/slab.h> | |
| #include <linux/pvclock_gtod.h> | |
| #include <linux/timekeeper_internal.h> | |
| #include <asm/pvclock.h> | |
| #include <asm/xen/hypervisor.h> | |
| #include <asm/xen/hypercall.h> | |
| #include <xen/events.h> | |
| #include <xen/features.h> | |
| #include <xen/interface/xen.h> | |
| #include <xen/interface/vcpu.h> | |
| #include "xen-ops.h" | |
| /* Minimum amount of time until next clock event fires */ | |
| #define TIMER_SLOP 100000 | |
| static u64 xen_sched_clock_offset __read_mostly; | |
| /* Get the TSC speed from Xen */ | |
| static unsigned long xen_tsc_khz(void) | |
| { | |
| struct pvclock_vcpu_time_info *info = | |
| &HYPERVISOR_shared_info->vcpu_info[0].time; | |
| setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ); | |
| return pvclock_tsc_khz(info); | |
| } | |
| static u64 xen_clocksource_read(void) | |
| { | |
| struct pvclock_vcpu_time_info *src; | |
| u64 ret; | |
| preempt_disable_notrace(); | |
| src = &__this_cpu_read(xen_vcpu)->time; | |
| ret = pvclock_clocksource_read(src); | |
| preempt_enable_notrace(); | |
| return ret; | |
| } | |
| static u64 xen_clocksource_get_cycles(struct clocksource *cs) | |
| { | |
| return xen_clocksource_read(); | |
| } | |
| static u64 xen_sched_clock(void) | |
| { | |
| return xen_clocksource_read() - xen_sched_clock_offset; | |
| } | |
| static void xen_read_wallclock(struct timespec64 *ts) | |
| { | |
| struct shared_info *s = HYPERVISOR_shared_info; | |
| struct pvclock_wall_clock *wall_clock = &(s->wc); | |
| struct pvclock_vcpu_time_info *vcpu_time; | |
| vcpu_time = &get_cpu_var(xen_vcpu)->time; | |
| pvclock_read_wallclock(wall_clock, vcpu_time, ts); | |
| put_cpu_var(xen_vcpu); | |
| } | |
| static void xen_get_wallclock(struct timespec64 *now) | |
| { | |
| xen_read_wallclock(now); | |
| } | |
| static int xen_set_wallclock(const struct timespec64 *now) | |
| { | |
| return -ENODEV; | |
| } | |
| static int xen_pvclock_gtod_notify(struct notifier_block *nb, | |
| unsigned long was_set, void *priv) | |
| { | |
| /* Protected by the calling core code serialization */ | |
| static struct timespec64 next_sync; | |
| struct xen_platform_op op; | |
| struct timespec64 now; | |
| struct timekeeper *tk = priv; | |
| static bool settime64_supported = true; | |
| int ret; | |
| now.tv_sec = tk->xtime_sec; | |
| now.tv_nsec = (long)(tk->tkr_mono.xtime_nsec >> tk->tkr_mono.shift); | |
| /* | |
| * We only take the expensive HV call when the clock was set | |
| * or when the 11 minutes RTC synchronization time elapsed. | |
| */ | |
| if (!was_set && timespec64_compare(&now, &next_sync) < 0) | |
| return NOTIFY_OK; | |
| again: | |
| if (settime64_supported) { | |
| op.cmd = XENPF_settime64; | |
| op.u.settime64.mbz = 0; | |
| op.u.settime64.secs = now.tv_sec; | |
| op.u.settime64.nsecs = now.tv_nsec; | |
| op.u.settime64.system_time = xen_clocksource_read(); | |
| } else { | |
| op.cmd = XENPF_settime32; | |
| op.u.settime32.secs = now.tv_sec; | |
| op.u.settime32.nsecs = now.tv_nsec; | |
| op.u.settime32.system_time = xen_clocksource_read(); | |
| } | |
| ret = HYPERVISOR_platform_op(&op); | |
| if (ret == -ENOSYS && settime64_supported) { | |
| settime64_supported = false; | |
| goto again; | |
| } | |
| if (ret < 0) | |
| return NOTIFY_BAD; | |
| /* | |
| * Move the next drift compensation time 11 minutes | |
| * ahead. That's emulating the sync_cmos_clock() update for | |
| * the hardware RTC. | |
| */ | |
| next_sync = now; | |
| next_sync.tv_sec += 11 * 60; | |
| return NOTIFY_OK; | |
| } | |
| static struct notifier_block xen_pvclock_gtod_notifier = { | |
| .notifier_call = xen_pvclock_gtod_notify, | |
| }; | |
| static int xen_cs_enable(struct clocksource *cs) | |
| { | |
| vclocks_set_used(VDSO_CLOCKMODE_PVCLOCK); | |
| return 0; | |
| } | |
| static struct clocksource xen_clocksource __read_mostly = { | |
| .name = "xen", | |
| .rating = 400, | |
| .read = xen_clocksource_get_cycles, | |
| .mask = CLOCKSOURCE_MASK(64), | |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, | |
| .enable = xen_cs_enable, | |
| }; | |
| /* | |
| Xen clockevent implementation | |
| Xen has two clockevent implementations: | |
| The old timer_op one works with all released versions of Xen prior | |
| to version 3.0.4. This version of the hypervisor provides a | |
| single-shot timer with nanosecond resolution. However, sharing the | |
| same event channel is a 100Hz tick which is delivered while the | |
| vcpu is running. We don't care about or use this tick, but it will | |
| cause the core time code to think the timer fired too soon, and | |
| will end up resetting it each time. It could be filtered, but | |
| doing so has complications when the ktime clocksource is not yet | |
| the xen clocksource (ie, at boot time). | |
| The new vcpu_op-based timer interface allows the tick timer period | |
| to be changed or turned off. The tick timer is not useful as a | |
| periodic timer because events are only delivered to running vcpus. | |
| The one-shot timer can report when a timeout is in the past, so | |
| set_next_event is capable of returning -ETIME when appropriate. | |
| This interface is used when available. | |
| */ | |
| /* | |
| Get a hypervisor absolute time. In theory we could maintain an | |
| offset between the kernel's time and the hypervisor's time, and | |
| apply that to a kernel's absolute timeout. Unfortunately the | |
| hypervisor and kernel times can drift even if the kernel is using | |
| the Xen clocksource, because ntp can warp the kernel's clocksource. | |
| */ | |
| static s64 get_abs_timeout(unsigned long delta) | |
| { | |
| return xen_clocksource_read() + delta; | |
| } | |
| static int xen_timerop_shutdown(struct clock_event_device *evt) | |
| { | |
| /* cancel timeout */ | |
| HYPERVISOR_set_timer_op(0); | |
| return 0; | |
| } | |
| static int xen_timerop_set_next_event(unsigned long delta, | |
| struct clock_event_device *evt) | |
| { | |
| WARN_ON(!clockevent_state_oneshot(evt)); | |
| if (HYPERVISOR_set_timer_op(get_abs_timeout(delta)) < 0) | |
| BUG(); | |
| /* We may have missed the deadline, but there's no real way of | |
| knowing for sure. If the event was in the past, then we'll | |
| get an immediate interrupt. */ | |
| return 0; | |
| } | |
| static struct clock_event_device xen_timerop_clockevent __ro_after_init = { | |
| .name = "xen", | |
| .features = CLOCK_EVT_FEAT_ONESHOT, | |
| .max_delta_ns = 0xffffffff, | |
| .max_delta_ticks = 0xffffffff, | |
| .min_delta_ns = TIMER_SLOP, | |
| .min_delta_ticks = TIMER_SLOP, | |
| .mult = 1, | |
| .shift = 0, | |
| .rating = 500, | |
| .set_state_shutdown = xen_timerop_shutdown, | |
| .set_next_event = xen_timerop_set_next_event, | |
| }; | |
| static int xen_vcpuop_shutdown(struct clock_event_device *evt) | |
| { | |
| int cpu = smp_processor_id(); | |
| if (HYPERVISOR_vcpu_op(VCPUOP_stop_singleshot_timer, xen_vcpu_nr(cpu), | |
| NULL) || | |
| HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, xen_vcpu_nr(cpu), | |
| NULL)) | |
| BUG(); | |
| return 0; | |
| } | |
| static int xen_vcpuop_set_oneshot(struct clock_event_device *evt) | |
| { | |
| int cpu = smp_processor_id(); | |
| if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, xen_vcpu_nr(cpu), | |
| NULL)) | |
| BUG(); | |
| return 0; | |
| } | |
| static int xen_vcpuop_set_next_event(unsigned long delta, | |
| struct clock_event_device *evt) | |
| { | |
| int cpu = smp_processor_id(); | |
| struct vcpu_set_singleshot_timer single; | |
| int ret; | |
| WARN_ON(!clockevent_state_oneshot(evt)); | |
| single.timeout_abs_ns = get_abs_timeout(delta); | |
| /* Get an event anyway, even if the timeout is already expired */ | |
| single.flags = 0; | |
| ret = HYPERVISOR_vcpu_op(VCPUOP_set_singleshot_timer, xen_vcpu_nr(cpu), | |
| &single); | |
| BUG_ON(ret != 0); | |
| return ret; | |
| } | |
| static struct clock_event_device xen_vcpuop_clockevent __ro_after_init = { | |
| .name = "xen", | |
| .features = CLOCK_EVT_FEAT_ONESHOT, | |
| .max_delta_ns = 0xffffffff, | |
| .max_delta_ticks = 0xffffffff, | |
| .min_delta_ns = TIMER_SLOP, | |
| .min_delta_ticks = TIMER_SLOP, | |
| .mult = 1, | |
| .shift = 0, | |
| .rating = 500, | |
| .set_state_shutdown = xen_vcpuop_shutdown, | |
| .set_state_oneshot = xen_vcpuop_set_oneshot, | |
| .set_next_event = xen_vcpuop_set_next_event, | |
| }; | |
| static const struct clock_event_device *xen_clockevent = | |
| &xen_timerop_clockevent; | |
| struct xen_clock_event_device { | |
| struct clock_event_device evt; | |
| char name[16]; | |
| }; | |
| static DEFINE_PER_CPU(struct xen_clock_event_device, xen_clock_events) = { .evt.irq = -1 }; | |
| static irqreturn_t xen_timer_interrupt(int irq, void *dev_id) | |
| { | |
| struct clock_event_device *evt = this_cpu_ptr(&xen_clock_events.evt); | |
| irqreturn_t ret; | |
| ret = IRQ_NONE; | |
| if (evt->event_handler) { | |
| evt->event_handler(evt); | |
| ret = IRQ_HANDLED; | |
| } | |
| return ret; | |
| } | |
| void xen_teardown_timer(int cpu) | |
| { | |
| struct clock_event_device *evt; | |
| evt = &per_cpu(xen_clock_events, cpu).evt; | |
| if (evt->irq >= 0) { | |
| unbind_from_irqhandler(evt->irq, NULL); | |
| evt->irq = -1; | |
| } | |
| } | |
| void xen_setup_timer(int cpu) | |
| { | |
| struct xen_clock_event_device *xevt = &per_cpu(xen_clock_events, cpu); | |
| struct clock_event_device *evt = &xevt->evt; | |
| int irq; | |
| WARN(evt->irq >= 0, "IRQ%d for CPU%d is already allocated\n", evt->irq, cpu); | |
| if (evt->irq >= 0) | |
| xen_teardown_timer(cpu); | |
| printk(KERN_INFO "installing Xen timer for CPU %d\n", cpu); | |
| snprintf(xevt->name, sizeof(xevt->name), "timer%d", cpu); | |
| irq = bind_virq_to_irqhandler(VIRQ_TIMER, cpu, xen_timer_interrupt, | |
| IRQF_PERCPU|IRQF_NOBALANCING|IRQF_TIMER| | |
| IRQF_FORCE_RESUME|IRQF_EARLY_RESUME, | |
| xevt->name, NULL); | |
| (void)xen_set_irq_priority(irq, XEN_IRQ_PRIORITY_MAX); | |
| memcpy(evt, xen_clockevent, sizeof(*evt)); | |
| evt->cpumask = cpumask_of(cpu); | |
| evt->irq = irq; | |
| } | |
| void xen_setup_cpu_clockevents(void) | |
| { | |
| clockevents_register_device(this_cpu_ptr(&xen_clock_events.evt)); | |
| } | |
| void xen_timer_resume(void) | |
| { | |
| int cpu; | |
| if (xen_clockevent != &xen_vcpuop_clockevent) | |
| return; | |
| for_each_online_cpu(cpu) { | |
| if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, | |
| xen_vcpu_nr(cpu), NULL)) | |
| BUG(); | |
| } | |
| } | |
| static const struct pv_time_ops xen_time_ops __initconst = { | |
| .sched_clock = xen_sched_clock, | |
| .steal_clock = xen_steal_clock, | |
| }; | |
| static struct pvclock_vsyscall_time_info *xen_clock __read_mostly; | |
| static u64 xen_clock_value_saved; | |
| void xen_save_time_memory_area(void) | |
| { | |
| struct vcpu_register_time_memory_area t; | |
| int ret; | |
| xen_clock_value_saved = xen_clocksource_read() - xen_sched_clock_offset; | |
| if (!xen_clock) | |
| return; | |
| t.addr.v = NULL; | |
| ret = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_time_memory_area, 0, &t); | |
| if (ret != 0) | |
| pr_notice("Cannot save secondary vcpu_time_info (err %d)", | |
| ret); | |
| else | |
| clear_page(xen_clock); | |
| } | |
| void xen_restore_time_memory_area(void) | |
| { | |
| struct vcpu_register_time_memory_area t; | |
| int ret; | |
| if (!xen_clock) | |
| goto out; | |
| t.addr.v = &xen_clock->pvti; | |
| ret = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_time_memory_area, 0, &t); | |
| /* | |
| * We don't disable VDSO_CLOCKMODE_PVCLOCK entirely if it fails to | |
| * register the secondary time info with Xen or if we migrated to a | |
| * host without the necessary flags. On both of these cases what | |
| * happens is either process seeing a zeroed out pvti or seeing no | |
| * PVCLOCK_TSC_STABLE_BIT bit set. Userspace checks the latter and | |
| * if 0, it discards the data in pvti and fallbacks to a system | |
| * call for a reliable timestamp. | |
| */ | |
| if (ret != 0) | |
| pr_notice("Cannot restore secondary vcpu_time_info (err %d)", | |
| ret); | |
| out: | |
| /* Need pvclock_resume() before using xen_clocksource_read(). */ | |
| pvclock_resume(); | |
| xen_sched_clock_offset = xen_clocksource_read() - xen_clock_value_saved; | |
| } | |
| static void xen_setup_vsyscall_time_info(void) | |
| { | |
| struct vcpu_register_time_memory_area t; | |
| struct pvclock_vsyscall_time_info *ti; | |
| int ret; | |
| ti = (struct pvclock_vsyscall_time_info *)get_zeroed_page(GFP_KERNEL); | |
| if (!ti) | |
| return; | |
| t.addr.v = &ti->pvti; | |
| ret = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_time_memory_area, 0, &t); | |
| if (ret) { | |
| pr_notice("xen: VDSO_CLOCKMODE_PVCLOCK not supported (err %d)\n", ret); | |
| free_page((unsigned long)ti); | |
| return; | |
| } | |
| /* | |
| * If primary time info had this bit set, secondary should too since | |
| * it's the same data on both just different memory regions. But we | |
| * still check it in case hypervisor is buggy. | |
| */ | |
| if (!(ti->pvti.flags & PVCLOCK_TSC_STABLE_BIT)) { | |
| t.addr.v = NULL; | |
| ret = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_time_memory_area, | |
| 0, &t); | |
| if (!ret) | |
| free_page((unsigned long)ti); | |
| pr_notice("xen: VDSO_CLOCKMODE_PVCLOCK not supported (tsc unstable)\n"); | |
| return; | |
| } | |
| xen_clock = ti; | |
| pvclock_set_pvti_cpu0_va(xen_clock); | |
| xen_clocksource.vdso_clock_mode = VDSO_CLOCKMODE_PVCLOCK; | |
| } | |
| static void __init xen_time_init(void) | |
| { | |
| struct pvclock_vcpu_time_info *pvti; | |
| int cpu = smp_processor_id(); | |
| struct timespec64 tp; | |
| /* As Dom0 is never moved, no penalty on using TSC there */ | |
| if (xen_initial_domain()) | |
| xen_clocksource.rating = 275; | |
| clocksource_register_hz(&xen_clocksource, NSEC_PER_SEC); | |
| if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, xen_vcpu_nr(cpu), | |
| NULL) == 0) { | |
| /* Successfully turned off 100Hz tick, so we have the | |
| vcpuop-based timer interface */ | |
| printk(KERN_DEBUG "Xen: using vcpuop timer interface\n"); | |
| xen_clockevent = &xen_vcpuop_clockevent; | |
| } | |
| /* Set initial system time with full resolution */ | |
| xen_read_wallclock(&tp); | |
| do_settimeofday64(&tp); | |
| setup_force_cpu_cap(X86_FEATURE_TSC); | |
| /* | |
| * We check ahead on the primary time info if this | |
| * bit is supported hence speeding up Xen clocksource. | |
| */ | |
| pvti = &__this_cpu_read(xen_vcpu)->time; | |
| if (pvti->flags & PVCLOCK_TSC_STABLE_BIT) { | |
| pvclock_set_flags(PVCLOCK_TSC_STABLE_BIT); | |
| xen_setup_vsyscall_time_info(); | |
| } | |
| xen_setup_runstate_info(cpu); | |
| xen_setup_timer(cpu); | |
| xen_setup_cpu_clockevents(); | |
| xen_time_setup_guest(); | |
| if (xen_initial_domain()) | |
| pvclock_gtod_register_notifier(&xen_pvclock_gtod_notifier); | |
| } | |
| void __init xen_init_time_ops(void) | |
| { | |
| xen_sched_clock_offset = xen_clocksource_read(); | |
| pv_ops.time = xen_time_ops; | |
| x86_init.timers.timer_init = xen_time_init; | |
| x86_init.timers.setup_percpu_clockev = x86_init_noop; | |
| x86_cpuinit.setup_percpu_clockev = x86_init_noop; | |
| x86_platform.calibrate_tsc = xen_tsc_khz; | |
| x86_platform.get_wallclock = xen_get_wallclock; | |
| /* Dom0 uses the native method to set the hardware RTC. */ | |
| if (!xen_initial_domain()) | |
| x86_platform.set_wallclock = xen_set_wallclock; | |
| } | |
| #ifdef CONFIG_XEN_PVHVM | |
| static void xen_hvm_setup_cpu_clockevents(void) | |
| { | |
| int cpu = smp_processor_id(); | |
| xen_setup_runstate_info(cpu); | |
| /* | |
| * xen_setup_timer(cpu) - snprintf is bad in atomic context. Hence | |
| * doing it xen_hvm_cpu_notify (which gets called by smp_init during | |
| * early bootup and also during CPU hotplug events). | |
| */ | |
| xen_setup_cpu_clockevents(); | |
| } | |
| void __init xen_hvm_init_time_ops(void) | |
| { | |
| /* | |
| * vector callback is needed otherwise we cannot receive interrupts | |
| * on cpu > 0 and at this point we don't know how many cpus are | |
| * available. | |
| */ | |
| if (!xen_have_vector_callback) | |
| return; | |
| if (!xen_feature(XENFEAT_hvm_safe_pvclock)) { | |
| pr_info("Xen doesn't support pvclock on HVM, disable pv timer"); | |
| return; | |
| } | |
| xen_sched_clock_offset = xen_clocksource_read(); | |
| pv_ops.time = xen_time_ops; | |
| x86_init.timers.setup_percpu_clockev = xen_time_init; | |
| x86_cpuinit.setup_percpu_clockev = xen_hvm_setup_cpu_clockevents; | |
| x86_platform.calibrate_tsc = xen_tsc_khz; | |
| x86_platform.get_wallclock = xen_get_wallclock; | |
| x86_platform.set_wallclock = xen_set_wallclock; | |
| } | |
| #endif | |
| /* Kernel parameter to specify Xen timer slop */ | |
| static int __init parse_xen_timer_slop(char *ptr) | |
| { | |
| unsigned long slop = memparse(ptr, NULL); | |
| xen_timerop_clockevent.min_delta_ns = slop; | |
| xen_timerop_clockevent.min_delta_ticks = slop; | |
| xen_vcpuop_clockevent.min_delta_ns = slop; | |
| xen_vcpuop_clockevent.min_delta_ticks = slop; | |
| return 0; | |
| } | |
| early_param("xen_timer_slop", parse_xen_timer_slop); |