| The following describes the current state of the NetWinder's floating point | |
| emulator. | |
| In the following nomenclature is used to describe the floating point | |
| instructions. It follows the conventions in the ARM manual. | |
| <S|D|E> = <single|double|extended>, no default | |
| {P|M|Z} = {round to +infinity,round to -infinity,round to zero}, | |
| default = round to nearest | |
| Note: items enclosed in {} are optional. | |
| Floating Point Coprocessor Data Transfer Instructions (CPDT) | |
| ------------------------------------------------------------ | |
| LDF/STF - load and store floating | |
| <LDF|STF>{cond}<S|D|E> Fd, Rn | |
| <LDF|STF>{cond}<S|D|E> Fd, [Rn, #<expression>]{!} | |
| <LDF|STF>{cond}<S|D|E> Fd, [Rn], #<expression> | |
| These instructions are fully implemented. | |
| LFM/SFM - load and store multiple floating | |
| Form 1 syntax: | |
| <LFM|SFM>{cond}<S|D|E> Fd, <count>, [Rn] | |
| <LFM|SFM>{cond}<S|D|E> Fd, <count>, [Rn, #<expression>]{!} | |
| <LFM|SFM>{cond}<S|D|E> Fd, <count>, [Rn], #<expression> | |
| Form 2 syntax: | |
| <LFM|SFM>{cond}<FD,EA> Fd, <count>, [Rn]{!} | |
| These instructions are fully implemented. They store/load three words | |
| for each floating point register into the memory location given in the | |
| instruction. The format in memory is unlikely to be compatible with | |
| other implementations, in particular the actual hardware. Specific | |
| mention of this is made in the ARM manuals. | |
| Floating Point Coprocessor Register Transfer Instructions (CPRT) | |
| ---------------------------------------------------------------- | |
| Conversions, read/write status/control register instructions | |
| FLT{cond}<S,D,E>{P,M,Z} Fn, Rd Convert integer to floating point | |
| FIX{cond}{P,M,Z} Rd, Fn Convert floating point to integer | |
| WFS{cond} Rd Write floating point status register | |
| RFS{cond} Rd Read floating point status register | |
| WFC{cond} Rd Write floating point control register | |
| RFC{cond} Rd Read floating point control register | |
| FLT/FIX are fully implemented. | |
| RFS/WFS are fully implemented. | |
| RFC/WFC are fully implemented. RFC/WFC are supervisor only instructions, and | |
| presently check the CPU mode, and do an invalid instruction trap if not called | |
| from supervisor mode. | |
| Compare instructions | |
| CMF{cond} Fn, Fm Compare floating | |
| CMFE{cond} Fn, Fm Compare floating with exception | |
| CNF{cond} Fn, Fm Compare negated floating | |
| CNFE{cond} Fn, Fm Compare negated floating with exception | |
| These are fully implemented. | |
| Floating Point Coprocessor Data Instructions (CPDT) | |
| --------------------------------------------------- | |
| Dyadic operations: | |
| ADF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - add | |
| SUF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - subtract | |
| RSF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - reverse subtract | |
| MUF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - multiply | |
| DVF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - divide | |
| RDV{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - reverse divide | |
| These are fully implemented. | |
| FML{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - fast multiply | |
| FDV{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - fast divide | |
| FRD{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - fast reverse divide | |
| These are fully implemented as well. They use the same algorithm as the | |
| non-fast versions. Hence, in this implementation their performance is | |
| equivalent to the MUF/DVF/RDV instructions. This is acceptable according | |
| to the ARM manual. The manual notes these are defined only for single | |
| operands, on the actual FPA11 hardware they do not work for double or | |
| extended precision operands. The emulator currently does not check | |
| the requested permissions conditions, and performs the requested operation. | |
| RMF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - IEEE remainder | |
| This is fully implemented. | |
| Monadic operations: | |
| MVF{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - move | |
| MNF{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - move negated | |
| These are fully implemented. | |
| ABS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - absolute value | |
| SQT{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - square root | |
| RND{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - round | |
| These are fully implemented. | |
| URD{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - unnormalized round | |
| NRM{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - normalize | |
| These are implemented. URD is implemented using the same code as the RND | |
| instruction. Since URD cannot return a unnormalized number, NRM becomes | |
| a NOP. | |
| Library calls: | |
| POW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - power | |
| RPW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - reverse power | |
| POL{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - polar angle (arctan2) | |
| LOG{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base 10 | |
| LGN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base e | |
| EXP{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - exponent | |
| SIN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - sine | |
| COS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - cosine | |
| TAN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - tangent | |
| ASN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arcsine | |
| ACS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arccosine | |
| ATN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arctangent | |
| These are not implemented. They are not currently issued by the compiler, | |
| and are handled by routines in libc. These are not implemented by the FPA11 | |
| hardware, but are handled by the floating point support code. They should | |
| be implemented in future versions. | |
| Signalling: | |
| Signals are implemented. However current ELF kernels produced by Rebel.com | |
| have a bug in them that prevents the module from generating a SIGFPE. This | |
| is caused by a failure to alias fp_current to the kernel variable | |
| current_set[0] correctly. | |
| The kernel provided with this distribution (vmlinux-nwfpe-0.93) contains | |
| a fix for this problem and also incorporates the current version of the | |
| emulator directly. It is possible to run with no floating point module | |
| loaded with this kernel. It is provided as a demonstration of the | |
| technology and for those who want to do floating point work that depends | |
| on signals. It is not strictly necessary to use the module. | |
| A module (either the one provided by Russell King, or the one in this | |
| distribution) can be loaded to replace the functionality of the emulator | |
| built into the kernel. |