| comment "Machine Types" | |
| if M68KCLASSIC | |
| config AMIGA | |
| bool "Amiga support" | |
| depends on MMU | |
| select MMU_MOTOROLA if MMU | |
| help | |
| This option enables support for the Amiga series of computers. If | |
| you plan to use this kernel on an Amiga, say Y here and browse the | |
| material available in <file:Documentation/m68k>; otherwise say N. | |
| config ATARI | |
| bool "Atari support" | |
| depends on MMU | |
| select MMU_MOTOROLA if MMU | |
| help | |
| This option enables support for the 68000-based Atari series of | |
| computers (including the TT, Falcon and Medusa). If you plan to use | |
| this kernel on an Atari, say Y here and browse the material | |
| available in <file:Documentation/m68k>; otherwise say N. | |
| config MAC | |
| bool "Macintosh support" | |
| depends on MMU | |
| select MMU_MOTOROLA if MMU | |
| help | |
| This option enables support for the Apple Macintosh series of | |
| computers (yes, there is experimental support now, at least for part | |
| of the series). | |
| Say N unless you're willing to code the remaining necessary support. | |
| ;) | |
| config APOLLO | |
| bool "Apollo support" | |
| depends on MMU | |
| select MMU_MOTOROLA if MMU | |
| help | |
| Say Y here if you want to run Linux on an MC680x0-based Apollo | |
| Domain workstation such as the DN3500. | |
| config VME | |
| bool "VME (Motorola and BVM) support" | |
| depends on MMU | |
| select MMU_MOTOROLA if MMU | |
| help | |
| Say Y here if you want to build a kernel for a 680x0 based VME | |
| board. Boards currently supported include Motorola boards MVME147, | |
| MVME162, MVME166, MVME167, MVME172, and MVME177. BVME4000 and | |
| BVME6000 boards from BVM Ltd are also supported. | |
| config MVME147 | |
| bool "MVME147 support" | |
| depends on MMU | |
| depends on VME | |
| help | |
| Say Y to include support for early Motorola VME boards. This will | |
| build a kernel which can run on MVME147 single-board computers. If | |
| you select this option you will have to select the appropriate | |
| drivers for SCSI, Ethernet and serial ports later on. | |
| config MVME16x | |
| bool "MVME162, 166 and 167 support" | |
| depends on MMU | |
| depends on VME | |
| help | |
| Say Y to include support for Motorola VME boards. This will build a | |
| kernel which can run on MVME162, MVME166, MVME167, MVME172, and | |
| MVME177 boards. If you select this option you will have to select | |
| the appropriate drivers for SCSI, Ethernet and serial ports later | |
| on. | |
| config BVME6000 | |
| bool "BVME4000 and BVME6000 support" | |
| depends on MMU | |
| depends on VME | |
| help | |
| Say Y to include support for VME boards from BVM Ltd. This will | |
| build a kernel which can run on BVME4000 and BVME6000 boards. If | |
| you select this option you will have to select the appropriate | |
| drivers for SCSI, Ethernet and serial ports later on. | |
| config HP300 | |
| bool "HP9000/300 and HP9000/400 support" | |
| depends on MMU | |
| select MMU_MOTOROLA if MMU | |
| help | |
| This option enables support for the HP9000/300 and HP9000/400 series | |
| of workstations. Support for these machines is still somewhat | |
| experimental. If you plan to try to use the kernel on such a machine | |
| say Y here. | |
| Everybody else says N. | |
| config SUN3X | |
| bool "Sun3x support" | |
| depends on MMU | |
| select MMU_MOTOROLA if MMU | |
| select M68030 | |
| help | |
| This option enables support for the Sun 3x series of workstations. | |
| Be warned that this support is very experimental. | |
| Note that Sun 3x kernels are not compatible with Sun 3 hardware. | |
| General Linux information on the Sun 3x series (now discontinued) | |
| is at <http://www.angelfire.com/ca2/tech68k/sun3.html>. | |
| If you don't want to compile a kernel for a Sun 3x, say N. | |
| config Q40 | |
| bool "Q40/Q60 support" | |
| depends on MMU | |
| select MMU_MOTOROLA if MMU | |
| help | |
| The Q40 is a Motorola 68040-based successor to the Sinclair QL | |
| manufactured in Germany. There is an official Q40 home page at | |
| <http://www.q40.de/>. This option enables support for the Q40 and | |
| Q60. Select your CPU below. For 68LC060 don't forget to enable FPU | |
| emulation. | |
| config SUN3 | |
| bool "Sun3 support" | |
| depends on MMU | |
| depends on !MMU_MOTOROLA | |
| select MMU_SUN3 if MMU | |
| select M68020 | |
| help | |
| This option enables support for the Sun 3 series of workstations | |
| (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires | |
| that all other hardware types must be disabled, as Sun 3 kernels | |
| are incompatible with all other m68k targets (including Sun 3x!). | |
| If you don't want to compile a kernel exclusively for a Sun 3, say N. | |
| endif # M68KCLASSIC | |
| config PILOT | |
| bool | |
| config PILOT3 | |
| bool "Pilot 1000/5000, PalmPilot Personal/Pro, or PalmIII support" | |
| depends on M68328 | |
| select PILOT | |
| help | |
| Support for the Palm Pilot 1000/5000, Personal/Pro and PalmIII. | |
| config XCOPILOT_BUGS | |
| bool "(X)Copilot support" | |
| depends on PILOT3 | |
| help | |
| Support the bugs of Xcopilot. | |
| config UCSIMM | |
| bool "uCsimm module support" | |
| depends on M68EZ328 | |
| help | |
| Support for the Arcturus Networks uCsimm module. | |
| config UCDIMM | |
| bool "uDsimm module support" | |
| depends on M68VZ328 | |
| help | |
| Support for the Arcturus Networks uDsimm module. | |
| config DRAGEN2 | |
| bool "DragenEngine II board support" | |
| depends on M68VZ328 | |
| help | |
| Support for the DragenEngine II board. | |
| config DIRECT_IO_ACCESS | |
| bool "Allow user to access IO directly" | |
| depends on (UCSIMM || UCDIMM || DRAGEN2) | |
| help | |
| Disable the CPU internal registers protection in user mode, | |
| to allow a user application to read/write them. | |
| config INIT_LCD | |
| bool "Initialize LCD" | |
| depends on (UCSIMM || UCDIMM || DRAGEN2) | |
| help | |
| Initialize the LCD controller of the 68x328 processor. | |
| config MEMORY_RESERVE | |
| int "Memory reservation (MiB)" | |
| depends on (UCSIMM || UCDIMM) | |
| help | |
| Reserve certain memory regions on 68x328 based boards. | |
| config UCQUICC | |
| bool "Lineo uCquicc board support" | |
| depends on M68360 | |
| help | |
| Support for the Lineo uCquicc board. | |
| config ARN5206 | |
| bool "Arnewsh 5206 board support" | |
| depends on M5206 | |
| help | |
| Support for the Arnewsh 5206 board. | |
| config M5206eC3 | |
| bool "Motorola M5206eC3 board support" | |
| depends on M5206e | |
| help | |
| Support for the Motorola M5206eC3 board. | |
| config ELITE | |
| bool "Motorola M5206eLITE board support" | |
| depends on M5206e | |
| help | |
| Support for the Motorola M5206eLITE board. | |
| config M5235EVB | |
| bool "Freescale M5235EVB support" | |
| depends on M523x | |
| help | |
| Support for the Freescale M5235EVB board. | |
| config M5249C3 | |
| bool "Motorola M5249C3 board support" | |
| depends on M5249 | |
| help | |
| Support for the Motorola M5249C3 board. | |
| config M5272C3 | |
| bool "Motorola M5272C3 board support" | |
| depends on M5272 | |
| help | |
| Support for the Motorola M5272C3 board. | |
| config WILDFIRE | |
| bool "Intec Automation Inc. WildFire board support" | |
| depends on M528x | |
| help | |
| Support for the Intec Automation Inc. WildFire. | |
| config WILDFIREMOD | |
| bool "Intec Automation Inc. WildFire module support" | |
| depends on M528x | |
| help | |
| Support for the Intec Automation Inc. WildFire module. | |
| config ARN5307 | |
| bool "Arnewsh 5307 board support" | |
| depends on M5307 | |
| help | |
| Support for the Arnewsh 5307 board. | |
| config M5307C3 | |
| bool "Motorola M5307C3 board support" | |
| depends on M5307 | |
| help | |
| Support for the Motorola M5307C3 board. | |
| config SECUREEDGEMP3 | |
| bool "SnapGear SecureEdge/MP3 platform support" | |
| depends on M5307 | |
| help | |
| Support for the SnapGear SecureEdge/MP3 platform. | |
| config M5407C3 | |
| bool "Motorola M5407C3 board support" | |
| depends on M5407 | |
| help | |
| Support for the Motorola M5407C3 board. | |
| config FIREBEE | |
| bool "FireBee board support" | |
| depends on M547x | |
| help | |
| Support for the FireBee ColdFire 5475 based board. | |
| config CLEOPATRA | |
| bool "Feith CLEOPATRA board support" | |
| depends on (M5307 || M5407) | |
| help | |
| Support for the Feith Cleopatra boards. | |
| config CANCam | |
| bool "Feith CANCam board support" | |
| depends on M5272 | |
| help | |
| Support for the Feith CANCam board. | |
| config SCALES | |
| bool "Feith SCALES board support" | |
| depends on M5272 | |
| help | |
| Support for the Feith SCALES board. | |
| config NETtel | |
| bool "SecureEdge/NETtel board support" | |
| depends on (M5206e || M5272 || M5307) | |
| help | |
| Support for the SnapGear NETtel/SecureEdge/SnapGear boards. | |
| config MOD5272 | |
| bool "Netburner MOD-5272 board support" | |
| depends on M5272 | |
| help | |
| Support for the Netburner MOD-5272 board. | |
| if !MMU || COLDFIRE | |
| comment "Machine Options" | |
| config UBOOT | |
| bool "Support for U-Boot command line parameters" | |
| help | |
| If you say Y here kernel will try to collect command | |
| line parameters from the initial u-boot stack. | |
| default n | |
| config 4KSTACKS | |
| bool "Use 4Kb for kernel stacks instead of 8Kb" | |
| default y | |
| help | |
| If you say Y here the kernel will use a 4Kb stacksize for the | |
| kernel stack attached to each process/thread. This facilitates | |
| running more threads on a system and also reduces the pressure | |
| on the VM subsystem for higher order allocations. | |
| comment "RAM configuration" | |
| config RAMBASE | |
| hex "Address of the base of RAM" | |
| default "0" | |
| help | |
| Define the address that RAM starts at. On many platforms this is | |
| 0, the base of the address space. And this is the default. Some | |
| platforms choose to setup their RAM at other addresses within the | |
| processor address space. | |
| config RAMSIZE | |
| hex "Size of RAM (in bytes), or 0 for automatic" | |
| default "0x400000" | |
| help | |
| Define the size of the system RAM. If you select 0 then the | |
| kernel will try to probe the RAM size at runtime. This is not | |
| supported on all CPU types. | |
| config VECTORBASE | |
| hex "Address of the base of system vectors" | |
| default "0" | |
| help | |
| Define the address of the system vectors. Commonly this is | |
| put at the start of RAM, but it doesn't have to be. On ColdFire | |
| platforms this address is programmed into the VBR register, thus | |
| actually setting the address to use. | |
| config MBAR | |
| hex "Address of the MBAR (internal peripherals)" | |
| default "0x10000000" | |
| depends on HAVE_MBAR | |
| help | |
| Define the address of the internal system peripherals. This value | |
| is set in the processors MBAR register. This is generally setup by | |
| the boot loader, and will not be written by the kernel. By far most | |
| ColdFire boards use the default 0x10000000 value, so if unsure then | |
| use this. | |
| config IPSBAR | |
| hex "Address of the IPSBAR (internal peripherals)" | |
| default "0x40000000" | |
| depends on HAVE_IPSBAR | |
| help | |
| Define the address of the internal system peripherals. This value | |
| is set in the processors IPSBAR register. This is generally setup by | |
| the boot loader, and will not be written by the kernel. By far most | |
| ColdFire boards use the default 0x40000000 value, so if unsure then | |
| use this. | |
| config KERNELBASE | |
| hex "Address of the base of kernel code" | |
| default "0x400" | |
| help | |
| Typically on m68k systems the kernel will not start at the base | |
| of RAM, but usually some small offset from it. Define the start | |
| address of the kernel here. The most common setup will have the | |
| processor vectors at the base of RAM and then the start of the | |
| kernel. On some platforms some RAM is reserved for boot loaders | |
| and the kernel starts after that. The 0x400 default was based on | |
| a system with the RAM based at address 0, and leaving enough room | |
| for the theoretical maximum number of 256 vectors. | |
| comment "ROM configuration" | |
| config ROM | |
| bool "Specify ROM linker regions" | |
| default n | |
| help | |
| Define a ROM region for the linker script. This creates a kernel | |
| that can be stored in flash, with possibly the text, and data | |
| regions being copied out to RAM at startup. | |
| config ROMBASE | |
| hex "Address of the base of ROM device" | |
| default "0" | |
| depends on ROM | |
| help | |
| Define the address that the ROM region starts at. Some platforms | |
| use this to set their chip select region accordingly for the boot | |
| device. | |
| config ROMVEC | |
| hex "Address of the base of the ROM vectors" | |
| default "0" | |
| depends on ROM | |
| help | |
| This is almost always the same as the base of the ROM. Since on all | |
| 68000 type variants the vectors are at the base of the boot device | |
| on system startup. | |
| config ROMSTART | |
| hex "Address of the base of system image in ROM" | |
| default "0x400" | |
| depends on ROM | |
| help | |
| Define the start address of the system image in ROM. Commonly this | |
| is strait after the ROM vectors. | |
| config ROMSIZE | |
| hex "Size of the ROM device" | |
| default "0x100000" | |
| depends on ROM | |
| help | |
| Size of the ROM device. On some platforms this is used to setup | |
| the chip select that controls the boot ROM device. | |
| choice | |
| prompt "Kernel executes from" | |
| ---help--- | |
| Choose the memory type that the kernel will be running in. | |
| config RAMKERNEL | |
| bool "RAM" | |
| help | |
| The kernel will be resident in RAM when running. | |
| config ROMKERNEL | |
| bool "ROM" | |
| help | |
| The kernel will be resident in FLASH/ROM when running. This is | |
| often referred to as Execute-in-Place (XIP), since the kernel | |
| code executes from the position it is stored in the FLASH/ROM. | |
| endchoice | |
| endif |