|  | /* | 
|  | *  linux/drivers/input/serio/sa1111ps2.c | 
|  | * | 
|  | *  Copyright (C) 2002 Russell King | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License. | 
|  | */ | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/input.h> | 
|  | #include <linux/serio.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/spinlock.h> | 
|  |  | 
|  | #include <asm/io.h> | 
|  |  | 
|  | #include <asm/hardware/sa1111.h> | 
|  |  | 
|  | #define PS2CR		0x0000 | 
|  | #define PS2STAT		0x0004 | 
|  | #define PS2DATA		0x0008 | 
|  | #define PS2CLKDIV	0x000c | 
|  | #define PS2PRECNT	0x0010 | 
|  |  | 
|  | #define PS2CR_ENA	0x08 | 
|  | #define PS2CR_FKD	0x02 | 
|  | #define PS2CR_FKC	0x01 | 
|  |  | 
|  | #define PS2STAT_STP	0x0100 | 
|  | #define PS2STAT_TXE	0x0080 | 
|  | #define PS2STAT_TXB	0x0040 | 
|  | #define PS2STAT_RXF	0x0020 | 
|  | #define PS2STAT_RXB	0x0010 | 
|  | #define PS2STAT_ENA	0x0008 | 
|  | #define PS2STAT_RXP	0x0004 | 
|  | #define PS2STAT_KBD	0x0002 | 
|  | #define PS2STAT_KBC	0x0001 | 
|  |  | 
|  | struct ps2if { | 
|  | struct serio		*io; | 
|  | struct sa1111_dev	*dev; | 
|  | void __iomem		*base; | 
|  | int			rx_irq; | 
|  | int			tx_irq; | 
|  | unsigned int		open; | 
|  | spinlock_t		lock; | 
|  | unsigned int		head; | 
|  | unsigned int		tail; | 
|  | unsigned char		buf[4]; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Read all bytes waiting in the PS2 port.  There should be | 
|  | * at the most one, but we loop for safety.  If there was a | 
|  | * framing error, we have to manually clear the status. | 
|  | */ | 
|  | static irqreturn_t ps2_rxint(int irq, void *dev_id) | 
|  | { | 
|  | struct ps2if *ps2if = dev_id; | 
|  | unsigned int scancode, flag, status; | 
|  |  | 
|  | status = readl_relaxed(ps2if->base + PS2STAT); | 
|  | while (status & PS2STAT_RXF) { | 
|  | if (status & PS2STAT_STP) | 
|  | writel_relaxed(PS2STAT_STP, ps2if->base + PS2STAT); | 
|  |  | 
|  | flag = (status & PS2STAT_STP ? SERIO_FRAME : 0) | | 
|  | (status & PS2STAT_RXP ? 0 : SERIO_PARITY); | 
|  |  | 
|  | scancode = readl_relaxed(ps2if->base + PS2DATA) & 0xff; | 
|  |  | 
|  | if (hweight8(scancode) & 1) | 
|  | flag ^= SERIO_PARITY; | 
|  |  | 
|  | serio_interrupt(ps2if->io, scancode, flag); | 
|  |  | 
|  | status = readl_relaxed(ps2if->base + PS2STAT); | 
|  | } | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Completion of ps2 write | 
|  | */ | 
|  | static irqreturn_t ps2_txint(int irq, void *dev_id) | 
|  | { | 
|  | struct ps2if *ps2if = dev_id; | 
|  | unsigned int status; | 
|  |  | 
|  | spin_lock(&ps2if->lock); | 
|  | status = readl_relaxed(ps2if->base + PS2STAT); | 
|  | if (ps2if->head == ps2if->tail) { | 
|  | disable_irq_nosync(irq); | 
|  | /* done */ | 
|  | } else if (status & PS2STAT_TXE) { | 
|  | writel_relaxed(ps2if->buf[ps2if->tail], ps2if->base + PS2DATA); | 
|  | ps2if->tail = (ps2if->tail + 1) & (sizeof(ps2if->buf) - 1); | 
|  | } | 
|  | spin_unlock(&ps2if->lock); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Write a byte to the PS2 port.  We have to wait for the | 
|  | * port to indicate that the transmitter is empty. | 
|  | */ | 
|  | static int ps2_write(struct serio *io, unsigned char val) | 
|  | { | 
|  | struct ps2if *ps2if = io->port_data; | 
|  | unsigned long flags; | 
|  | unsigned int head; | 
|  |  | 
|  | spin_lock_irqsave(&ps2if->lock, flags); | 
|  |  | 
|  | /* | 
|  | * If the TX register is empty, we can go straight out. | 
|  | */ | 
|  | if (readl_relaxed(ps2if->base + PS2STAT) & PS2STAT_TXE) { | 
|  | writel_relaxed(val, ps2if->base + PS2DATA); | 
|  | } else { | 
|  | if (ps2if->head == ps2if->tail) | 
|  | enable_irq(ps2if->tx_irq); | 
|  | head = (ps2if->head + 1) & (sizeof(ps2if->buf) - 1); | 
|  | if (head != ps2if->tail) { | 
|  | ps2if->buf[ps2if->head] = val; | 
|  | ps2if->head = head; | 
|  | } | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&ps2if->lock, flags); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ps2_open(struct serio *io) | 
|  | { | 
|  | struct ps2if *ps2if = io->port_data; | 
|  | int ret; | 
|  |  | 
|  | ret = sa1111_enable_device(ps2if->dev); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = request_irq(ps2if->rx_irq, ps2_rxint, 0, | 
|  | SA1111_DRIVER_NAME(ps2if->dev), ps2if); | 
|  | if (ret) { | 
|  | printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n", | 
|  | ps2if->rx_irq, ret); | 
|  | sa1111_disable_device(ps2if->dev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = request_irq(ps2if->tx_irq, ps2_txint, 0, | 
|  | SA1111_DRIVER_NAME(ps2if->dev), ps2if); | 
|  | if (ret) { | 
|  | printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n", | 
|  | ps2if->tx_irq, ret); | 
|  | free_irq(ps2if->rx_irq, ps2if); | 
|  | sa1111_disable_device(ps2if->dev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ps2if->open = 1; | 
|  |  | 
|  | enable_irq_wake(ps2if->rx_irq); | 
|  |  | 
|  | writel_relaxed(PS2CR_ENA, ps2if->base + PS2CR); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ps2_close(struct serio *io) | 
|  | { | 
|  | struct ps2if *ps2if = io->port_data; | 
|  |  | 
|  | writel_relaxed(0, ps2if->base + PS2CR); | 
|  |  | 
|  | disable_irq_wake(ps2if->rx_irq); | 
|  |  | 
|  | ps2if->open = 0; | 
|  |  | 
|  | free_irq(ps2if->tx_irq, ps2if); | 
|  | free_irq(ps2if->rx_irq, ps2if); | 
|  |  | 
|  | sa1111_disable_device(ps2if->dev); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Clear the input buffer. | 
|  | */ | 
|  | static void ps2_clear_input(struct ps2if *ps2if) | 
|  | { | 
|  | int maxread = 100; | 
|  |  | 
|  | while (maxread--) { | 
|  | if ((readl_relaxed(ps2if->base + PS2DATA) & 0xff) == 0xff) | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static unsigned int ps2_test_one(struct ps2if *ps2if, | 
|  | unsigned int mask) | 
|  | { | 
|  | unsigned int val; | 
|  |  | 
|  | writel_relaxed(PS2CR_ENA | mask, ps2if->base + PS2CR); | 
|  |  | 
|  | udelay(10); | 
|  |  | 
|  | val = readl_relaxed(ps2if->base + PS2STAT); | 
|  | return val & (PS2STAT_KBC | PS2STAT_KBD); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Test the keyboard interface.  We basically check to make sure that | 
|  | * we can drive each line to the keyboard independently of each other. | 
|  | */ | 
|  | static int ps2_test(struct ps2if *ps2if) | 
|  | { | 
|  | unsigned int stat; | 
|  | int ret = 0; | 
|  |  | 
|  | stat = ps2_test_one(ps2if, PS2CR_FKC); | 
|  | if (stat != PS2STAT_KBD) { | 
|  | printk("PS/2 interface test failed[1]: %02x\n", stat); | 
|  | ret = -ENODEV; | 
|  | } | 
|  |  | 
|  | stat = ps2_test_one(ps2if, 0); | 
|  | if (stat != (PS2STAT_KBC | PS2STAT_KBD)) { | 
|  | printk("PS/2 interface test failed[2]: %02x\n", stat); | 
|  | ret = -ENODEV; | 
|  | } | 
|  |  | 
|  | stat = ps2_test_one(ps2if, PS2CR_FKD); | 
|  | if (stat != PS2STAT_KBC) { | 
|  | printk("PS/2 interface test failed[3]: %02x\n", stat); | 
|  | ret = -ENODEV; | 
|  | } | 
|  |  | 
|  | writel_relaxed(0, ps2if->base + PS2CR); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Add one device to this driver. | 
|  | */ | 
|  | static int ps2_probe(struct sa1111_dev *dev) | 
|  | { | 
|  | struct ps2if *ps2if; | 
|  | struct serio *serio; | 
|  | int ret; | 
|  |  | 
|  | ps2if = kzalloc(sizeof(struct ps2if), GFP_KERNEL); | 
|  | serio = kzalloc(sizeof(struct serio), GFP_KERNEL); | 
|  | if (!ps2if || !serio) { | 
|  | ret = -ENOMEM; | 
|  | goto free; | 
|  | } | 
|  |  | 
|  | serio->id.type		= SERIO_8042; | 
|  | serio->write		= ps2_write; | 
|  | serio->open		= ps2_open; | 
|  | serio->close		= ps2_close; | 
|  | strlcpy(serio->name, dev_name(&dev->dev), sizeof(serio->name)); | 
|  | strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys)); | 
|  | serio->port_data	= ps2if; | 
|  | serio->dev.parent	= &dev->dev; | 
|  | ps2if->io		= serio; | 
|  | ps2if->dev		= dev; | 
|  | sa1111_set_drvdata(dev, ps2if); | 
|  |  | 
|  | spin_lock_init(&ps2if->lock); | 
|  |  | 
|  | ps2if->rx_irq = sa1111_get_irq(dev, 0); | 
|  | if (ps2if->rx_irq <= 0) { | 
|  | ret = ps2if->rx_irq ? : -ENXIO; | 
|  | goto free; | 
|  | } | 
|  |  | 
|  | ps2if->tx_irq = sa1111_get_irq(dev, 1); | 
|  | if (ps2if->tx_irq <= 0) { | 
|  | ret = ps2if->tx_irq ? : -ENXIO; | 
|  | goto free; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Request the physical region for this PS2 port. | 
|  | */ | 
|  | if (!request_mem_region(dev->res.start, | 
|  | dev->res.end - dev->res.start + 1, | 
|  | SA1111_DRIVER_NAME(dev))) { | 
|  | ret = -EBUSY; | 
|  | goto free; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Our parent device has already mapped the region. | 
|  | */ | 
|  | ps2if->base = dev->mapbase; | 
|  |  | 
|  | sa1111_enable_device(ps2if->dev); | 
|  |  | 
|  | /* Incoming clock is 8MHz */ | 
|  | writel_relaxed(0, ps2if->base + PS2CLKDIV); | 
|  | writel_relaxed(127, ps2if->base + PS2PRECNT); | 
|  |  | 
|  | /* | 
|  | * Flush any pending input. | 
|  | */ | 
|  | ps2_clear_input(ps2if); | 
|  |  | 
|  | /* | 
|  | * Test the keyboard interface. | 
|  | */ | 
|  | ret = ps2_test(ps2if); | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | /* | 
|  | * Flush any pending input. | 
|  | */ | 
|  | ps2_clear_input(ps2if); | 
|  |  | 
|  | sa1111_disable_device(ps2if->dev); | 
|  | serio_register_port(ps2if->io); | 
|  | return 0; | 
|  |  | 
|  | out: | 
|  | sa1111_disable_device(ps2if->dev); | 
|  | release_mem_region(dev->res.start, resource_size(&dev->res)); | 
|  | free: | 
|  | sa1111_set_drvdata(dev, NULL); | 
|  | kfree(ps2if); | 
|  | kfree(serio); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Remove one device from this driver. | 
|  | */ | 
|  | static int ps2_remove(struct sa1111_dev *dev) | 
|  | { | 
|  | struct ps2if *ps2if = sa1111_get_drvdata(dev); | 
|  |  | 
|  | serio_unregister_port(ps2if->io); | 
|  | release_mem_region(dev->res.start, resource_size(&dev->res)); | 
|  | sa1111_set_drvdata(dev, NULL); | 
|  |  | 
|  | kfree(ps2if); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Our device driver structure | 
|  | */ | 
|  | static struct sa1111_driver ps2_driver = { | 
|  | .drv = { | 
|  | .name	= "sa1111-ps2", | 
|  | .owner	= THIS_MODULE, | 
|  | }, | 
|  | .devid		= SA1111_DEVID_PS2, | 
|  | .probe		= ps2_probe, | 
|  | .remove		= ps2_remove, | 
|  | }; | 
|  |  | 
|  | static int __init ps2_init(void) | 
|  | { | 
|  | return sa1111_driver_register(&ps2_driver); | 
|  | } | 
|  |  | 
|  | static void __exit ps2_exit(void) | 
|  | { | 
|  | sa1111_driver_unregister(&ps2_driver); | 
|  | } | 
|  |  | 
|  | module_init(ps2_init); | 
|  | module_exit(ps2_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>"); | 
|  | MODULE_DESCRIPTION("SA1111 PS2 controller driver"); | 
|  | MODULE_LICENSE("GPL"); |