| # SPDX-License-Identifier: GPL-2.0 | |
| config MACH_TX39XX | |
| bool | |
| select MACH_TXX9 | |
| select SYS_HAS_CPU_TX39XX | |
| config MACH_TX49XX | |
| bool | |
| select MACH_TXX9 | |
| select CEVT_R4K | |
| select CSRC_R4K | |
| select IRQ_MIPS_CPU | |
| select SYS_HAS_CPU_TX49XX | |
| select SYS_SUPPORTS_64BIT_KERNEL | |
| config MACH_TXX9 | |
| bool | |
| select DMA_NONCOHERENT | |
| select SWAP_IO_SPACE | |
| select SYS_HAS_EARLY_PRINTK | |
| select SYS_SUPPORTS_32BIT_KERNEL | |
| select SYS_SUPPORTS_LITTLE_ENDIAN | |
| select SYS_SUPPORTS_BIG_ENDIAN | |
| select COMMON_CLK | |
| config TOSHIBA_JMR3927 | |
| bool "Toshiba JMR-TX3927 board" | |
| depends on MACH_TX39XX | |
| select SOC_TX3927 | |
| config TOSHIBA_RBTX4927 | |
| bool "Toshiba RBTX49[23]7 board" | |
| depends on MACH_TX49XX | |
| select SOC_TX4927 | |
| # TX4937 is subset of TX4938 | |
| select SOC_TX4938 | |
| help | |
| This Toshiba board is based on the TX4927 processor. Say Y here to | |
| support this machine type | |
| config TOSHIBA_RBTX4938 | |
| bool "Toshiba RBTX4938 board" | |
| depends on MACH_TX49XX | |
| select SOC_TX4938 | |
| help | |
| This Toshiba board is based on the TX4938 processor. Say Y here to | |
| support this machine type | |
| config TOSHIBA_RBTX4939 | |
| bool "Toshiba RBTX4939 board" | |
| depends on MACH_TX49XX | |
| select SOC_TX4939 | |
| select TXX9_7SEGLED | |
| help | |
| This Toshiba board is based on the TX4939 processor. Say Y here to | |
| support this machine type | |
| config SOC_TX3927 | |
| bool | |
| select CEVT_TXX9 | |
| select HAS_TXX9_SERIAL | |
| select HW_HAS_PCI | |
| select IRQ_TXX9 | |
| select GPIO_TXX9 | |
| config SOC_TX4927 | |
| bool | |
| select CEVT_TXX9 | |
| select HAS_TXX9_SERIAL | |
| select HW_HAS_PCI | |
| select IRQ_TXX9 | |
| select PCI_TX4927 | |
| select GPIO_TXX9 | |
| select HAS_TXX9_ACLC | |
| config SOC_TX4938 | |
| bool | |
| select CEVT_TXX9 | |
| select HAS_TXX9_SERIAL | |
| select HW_HAS_PCI | |
| select IRQ_TXX9 | |
| select PCI_TX4927 | |
| select GPIO_TXX9 | |
| select HAS_TXX9_ACLC | |
| config SOC_TX4939 | |
| bool | |
| select CEVT_TXX9 | |
| select HAS_TXX9_SERIAL | |
| select HW_HAS_PCI | |
| select PCI_TX4927 | |
| select HAS_TXX9_ACLC | |
| config TXX9_7SEGLED | |
| bool | |
| config TOSHIBA_FPCIB0 | |
| bool "FPCIB0 Backplane Support" | |
| depends on PCI && MACH_TXX9 | |
| select I8259 | |
| config PICMG_PCI_BACKPLANE_DEFAULT | |
| bool "Support for PICMG PCI Backplane" | |
| depends on PCI && MACH_TXX9 | |
| default y if !TOSHIBA_FPCIB0 | |
| if TOSHIBA_RBTX4938 | |
| comment "Multiplex Pin Select" | |
| choice | |
| prompt "PIO[58:61]" | |
| default TOSHIBA_RBTX4938_MPLEX_PIO58_61 | |
| config TOSHIBA_RBTX4938_MPLEX_PIO58_61 | |
| bool "PIO" | |
| config TOSHIBA_RBTX4938_MPLEX_NAND | |
| bool "NAND" | |
| config TOSHIBA_RBTX4938_MPLEX_ATA | |
| bool "ATA" | |
| config TOSHIBA_RBTX4938_MPLEX_KEEP | |
| bool "Keep firmware settings" | |
| endchoice | |
| endif | |
| config PCI_TX4927 | |
| bool |