| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * CPPC (Collaborative Processor Performance Control) driver for | |
| * interfacing with the CPUfreq layer and governors. See | |
| * cppc_acpi.c for CPPC specific methods. | |
| * | |
| * (C) Copyright 2014, 2015 Linaro Ltd. | |
| * Author: Ashwin Chaugule <ashwin.chaugule@linaro.org> | |
| */ | |
| #define pr_fmt(fmt) "CPPC Cpufreq:" fmt | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/delay.h> | |
| #include <linux/cpu.h> | |
| #include <linux/cpufreq.h> | |
| #include <linux/dmi.h> | |
| #include <linux/time.h> | |
| #include <linux/vmalloc.h> | |
| #include <asm/unaligned.h> | |
| #include <acpi/cppc_acpi.h> | |
| /* Minimum struct length needed for the DMI processor entry we want */ | |
| #define DMI_ENTRY_PROCESSOR_MIN_LENGTH 48 | |
| /* Offset in the DMI processor structure for the max frequency */ | |
| #define DMI_PROCESSOR_MAX_SPEED 0x14 | |
| /* | |
| * This list contains information parsed from per CPU ACPI _CPC and _PSD | |
| * structures: e.g. the highest and lowest supported performance, capabilities, | |
| * desired performance, level requested etc. Depending on the share_type, not | |
| * all CPUs will have an entry in the list. | |
| */ | |
| static LIST_HEAD(cpu_data_list); | |
| static bool boost_supported; | |
| struct cppc_workaround_oem_info { | |
| char oem_id[ACPI_OEM_ID_SIZE + 1]; | |
| char oem_table_id[ACPI_OEM_TABLE_ID_SIZE + 1]; | |
| u32 oem_revision; | |
| }; | |
| static struct cppc_workaround_oem_info wa_info[] = { | |
| { | |
| .oem_id = "HISI ", | |
| .oem_table_id = "HIP07 ", | |
| .oem_revision = 0, | |
| }, { | |
| .oem_id = "HISI ", | |
| .oem_table_id = "HIP08 ", | |
| .oem_revision = 0, | |
| } | |
| }; | |
| /* Callback function used to retrieve the max frequency from DMI */ | |
| static void cppc_find_dmi_mhz(const struct dmi_header *dm, void *private) | |
| { | |
| const u8 *dmi_data = (const u8 *)dm; | |
| u16 *mhz = (u16 *)private; | |
| if (dm->type == DMI_ENTRY_PROCESSOR && | |
| dm->length >= DMI_ENTRY_PROCESSOR_MIN_LENGTH) { | |
| u16 val = (u16)get_unaligned((const u16 *) | |
| (dmi_data + DMI_PROCESSOR_MAX_SPEED)); | |
| *mhz = val > *mhz ? val : *mhz; | |
| } | |
| } | |
| /* Look up the max frequency in DMI */ | |
| static u64 cppc_get_dmi_max_khz(void) | |
| { | |
| u16 mhz = 0; | |
| dmi_walk(cppc_find_dmi_mhz, &mhz); | |
| /* | |
| * Real stupid fallback value, just in case there is no | |
| * actual value set. | |
| */ | |
| mhz = mhz ? mhz : 1; | |
| return (1000 * mhz); | |
| } | |
| /* | |
| * If CPPC lowest_freq and nominal_freq registers are exposed then we can | |
| * use them to convert perf to freq and vice versa | |
| * | |
| * If the perf/freq point lies between Nominal and Lowest, we can treat | |
| * (Low perf, Low freq) and (Nom Perf, Nom freq) as 2D co-ordinates of a line | |
| * and extrapolate the rest | |
| * For perf/freq > Nominal, we use the ratio perf:freq at Nominal for conversion | |
| */ | |
| static unsigned int cppc_cpufreq_perf_to_khz(struct cppc_cpudata *cpu_data, | |
| unsigned int perf) | |
| { | |
| struct cppc_perf_caps *caps = &cpu_data->perf_caps; | |
| static u64 max_khz; | |
| u64 mul, div; | |
| if (caps->lowest_freq && caps->nominal_freq) { | |
| if (perf >= caps->nominal_perf) { | |
| mul = caps->nominal_freq; | |
| div = caps->nominal_perf; | |
| } else { | |
| mul = caps->nominal_freq - caps->lowest_freq; | |
| div = caps->nominal_perf - caps->lowest_perf; | |
| } | |
| } else { | |
| if (!max_khz) | |
| max_khz = cppc_get_dmi_max_khz(); | |
| mul = max_khz; | |
| div = caps->highest_perf; | |
| } | |
| return (u64)perf * mul / div; | |
| } | |
| static unsigned int cppc_cpufreq_khz_to_perf(struct cppc_cpudata *cpu_data, | |
| unsigned int freq) | |
| { | |
| struct cppc_perf_caps *caps = &cpu_data->perf_caps; | |
| static u64 max_khz; | |
| u64 mul, div; | |
| if (caps->lowest_freq && caps->nominal_freq) { | |
| if (freq >= caps->nominal_freq) { | |
| mul = caps->nominal_perf; | |
| div = caps->nominal_freq; | |
| } else { | |
| mul = caps->lowest_perf; | |
| div = caps->lowest_freq; | |
| } | |
| } else { | |
| if (!max_khz) | |
| max_khz = cppc_get_dmi_max_khz(); | |
| mul = caps->highest_perf; | |
| div = max_khz; | |
| } | |
| return (u64)freq * mul / div; | |
| } | |
| static int cppc_cpufreq_set_target(struct cpufreq_policy *policy, | |
| unsigned int target_freq, | |
| unsigned int relation) | |
| { | |
| struct cppc_cpudata *cpu_data = policy->driver_data; | |
| unsigned int cpu = policy->cpu; | |
| struct cpufreq_freqs freqs; | |
| u32 desired_perf; | |
| int ret = 0; | |
| desired_perf = cppc_cpufreq_khz_to_perf(cpu_data, target_freq); | |
| /* Return if it is exactly the same perf */ | |
| if (desired_perf == cpu_data->perf_ctrls.desired_perf) | |
| return ret; | |
| cpu_data->perf_ctrls.desired_perf = desired_perf; | |
| freqs.old = policy->cur; | |
| freqs.new = target_freq; | |
| cpufreq_freq_transition_begin(policy, &freqs); | |
| ret = cppc_set_perf(cpu, &cpu_data->perf_ctrls); | |
| cpufreq_freq_transition_end(policy, &freqs, ret != 0); | |
| if (ret) | |
| pr_debug("Failed to set target on CPU:%d. ret:%d\n", | |
| cpu, ret); | |
| return ret; | |
| } | |
| static int cppc_verify_policy(struct cpufreq_policy_data *policy) | |
| { | |
| cpufreq_verify_within_cpu_limits(policy); | |
| return 0; | |
| } | |
| static void cppc_cpufreq_stop_cpu(struct cpufreq_policy *policy) | |
| { | |
| struct cppc_cpudata *cpu_data = policy->driver_data; | |
| struct cppc_perf_caps *caps = &cpu_data->perf_caps; | |
| unsigned int cpu = policy->cpu; | |
| int ret; | |
| cpu_data->perf_ctrls.desired_perf = caps->lowest_perf; | |
| ret = cppc_set_perf(cpu, &cpu_data->perf_ctrls); | |
| if (ret) | |
| pr_debug("Err setting perf value:%d on CPU:%d. ret:%d\n", | |
| caps->lowest_perf, cpu, ret); | |
| /* Remove CPU node from list and free driver data for policy */ | |
| free_cpumask_var(cpu_data->shared_cpu_map); | |
| list_del(&cpu_data->node); | |
| kfree(policy->driver_data); | |
| policy->driver_data = NULL; | |
| } | |
| /* | |
| * The PCC subspace describes the rate at which platform can accept commands | |
| * on the shared PCC channel (including READs which do not count towards freq | |
| * transition requests), so ideally we need to use the PCC values as a fallback | |
| * if we don't have a platform specific transition_delay_us | |
| */ | |
| #ifdef CONFIG_ARM64 | |
| #include <asm/cputype.h> | |
| static unsigned int cppc_cpufreq_get_transition_delay_us(unsigned int cpu) | |
| { | |
| unsigned long implementor = read_cpuid_implementor(); | |
| unsigned long part_num = read_cpuid_part_number(); | |
| unsigned int delay_us = 0; | |
| switch (implementor) { | |
| case ARM_CPU_IMP_QCOM: | |
| switch (part_num) { | |
| case QCOM_CPU_PART_FALKOR_V1: | |
| case QCOM_CPU_PART_FALKOR: | |
| delay_us = 10000; | |
| break; | |
| default: | |
| delay_us = cppc_get_transition_latency(cpu) / NSEC_PER_USEC; | |
| break; | |
| } | |
| break; | |
| default: | |
| delay_us = cppc_get_transition_latency(cpu) / NSEC_PER_USEC; | |
| break; | |
| } | |
| return delay_us; | |
| } | |
| #else | |
| static unsigned int cppc_cpufreq_get_transition_delay_us(unsigned int cpu) | |
| { | |
| return cppc_get_transition_latency(cpu) / NSEC_PER_USEC; | |
| } | |
| #endif | |
| static struct cppc_cpudata *cppc_cpufreq_get_cpu_data(unsigned int cpu) | |
| { | |
| struct cppc_cpudata *cpu_data; | |
| int ret; | |
| cpu_data = kzalloc(sizeof(struct cppc_cpudata), GFP_KERNEL); | |
| if (!cpu_data) | |
| goto out; | |
| if (!zalloc_cpumask_var(&cpu_data->shared_cpu_map, GFP_KERNEL)) | |
| goto free_cpu; | |
| ret = acpi_get_psd_map(cpu, cpu_data); | |
| if (ret) { | |
| pr_debug("Err parsing CPU%d PSD data: ret:%d\n", cpu, ret); | |
| goto free_mask; | |
| } | |
| ret = cppc_get_perf_caps(cpu, &cpu_data->perf_caps); | |
| if (ret) { | |
| pr_debug("Err reading CPU%d perf caps: ret:%d\n", cpu, ret); | |
| goto free_mask; | |
| } | |
| /* Convert the lowest and nominal freq from MHz to KHz */ | |
| cpu_data->perf_caps.lowest_freq *= 1000; | |
| cpu_data->perf_caps.nominal_freq *= 1000; | |
| list_add(&cpu_data->node, &cpu_data_list); | |
| return cpu_data; | |
| free_mask: | |
| free_cpumask_var(cpu_data->shared_cpu_map); | |
| free_cpu: | |
| kfree(cpu_data); | |
| out: | |
| return NULL; | |
| } | |
| static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy) | |
| { | |
| unsigned int cpu = policy->cpu; | |
| struct cppc_cpudata *cpu_data; | |
| struct cppc_perf_caps *caps; | |
| int ret; | |
| cpu_data = cppc_cpufreq_get_cpu_data(cpu); | |
| if (!cpu_data) { | |
| pr_err("Error in acquiring _CPC/_PSD data for CPU%d.\n", cpu); | |
| return -ENODEV; | |
| } | |
| caps = &cpu_data->perf_caps; | |
| policy->driver_data = cpu_data; | |
| /* | |
| * Set min to lowest nonlinear perf to avoid any efficiency penalty (see | |
| * Section 8.4.7.1.1.5 of ACPI 6.1 spec) | |
| */ | |
| policy->min = cppc_cpufreq_perf_to_khz(cpu_data, | |
| caps->lowest_nonlinear_perf); | |
| policy->max = cppc_cpufreq_perf_to_khz(cpu_data, | |
| caps->nominal_perf); | |
| /* | |
| * Set cpuinfo.min_freq to Lowest to make the full range of performance | |
| * available if userspace wants to use any perf between lowest & lowest | |
| * nonlinear perf | |
| */ | |
| policy->cpuinfo.min_freq = cppc_cpufreq_perf_to_khz(cpu_data, | |
| caps->lowest_perf); | |
| policy->cpuinfo.max_freq = cppc_cpufreq_perf_to_khz(cpu_data, | |
| caps->nominal_perf); | |
| policy->transition_delay_us = cppc_cpufreq_get_transition_delay_us(cpu); | |
| policy->shared_type = cpu_data->shared_type; | |
| switch (policy->shared_type) { | |
| case CPUFREQ_SHARED_TYPE_HW: | |
| case CPUFREQ_SHARED_TYPE_NONE: | |
| /* Nothing to be done - we'll have a policy for each CPU */ | |
| break; | |
| case CPUFREQ_SHARED_TYPE_ANY: | |
| /* | |
| * All CPUs in the domain will share a policy and all cpufreq | |
| * operations will use a single cppc_cpudata structure stored | |
| * in policy->driver_data. | |
| */ | |
| cpumask_copy(policy->cpus, cpu_data->shared_cpu_map); | |
| break; | |
| default: | |
| pr_debug("Unsupported CPU co-ord type: %d\n", | |
| policy->shared_type); | |
| return -EFAULT; | |
| } | |
| /* | |
| * If 'highest_perf' is greater than 'nominal_perf', we assume CPU Boost | |
| * is supported. | |
| */ | |
| if (caps->highest_perf > caps->nominal_perf) | |
| boost_supported = true; | |
| /* Set policy->cur to max now. The governors will adjust later. */ | |
| policy->cur = cppc_cpufreq_perf_to_khz(cpu_data, caps->highest_perf); | |
| cpu_data->perf_ctrls.desired_perf = caps->highest_perf; | |
| ret = cppc_set_perf(cpu, &cpu_data->perf_ctrls); | |
| if (ret) | |
| pr_debug("Err setting perf value:%d on CPU:%d. ret:%d\n", | |
| caps->highest_perf, cpu, ret); | |
| return ret; | |
| } | |
| static inline u64 get_delta(u64 t1, u64 t0) | |
| { | |
| if (t1 > t0 || t0 > ~(u32)0) | |
| return t1 - t0; | |
| return (u32)t1 - (u32)t0; | |
| } | |
| static int cppc_get_rate_from_fbctrs(struct cppc_cpudata *cpu_data, | |
| struct cppc_perf_fb_ctrs fb_ctrs_t0, | |
| struct cppc_perf_fb_ctrs fb_ctrs_t1) | |
| { | |
| u64 delta_reference, delta_delivered; | |
| u64 reference_perf, delivered_perf; | |
| reference_perf = fb_ctrs_t0.reference_perf; | |
| delta_reference = get_delta(fb_ctrs_t1.reference, | |
| fb_ctrs_t0.reference); | |
| delta_delivered = get_delta(fb_ctrs_t1.delivered, | |
| fb_ctrs_t0.delivered); | |
| /* Check to avoid divide-by zero */ | |
| if (delta_reference || delta_delivered) | |
| delivered_perf = (reference_perf * delta_delivered) / | |
| delta_reference; | |
| else | |
| delivered_perf = cpu_data->perf_ctrls.desired_perf; | |
| return cppc_cpufreq_perf_to_khz(cpu_data, delivered_perf); | |
| } | |
| static unsigned int cppc_cpufreq_get_rate(unsigned int cpu) | |
| { | |
| struct cppc_perf_fb_ctrs fb_ctrs_t0 = {0}, fb_ctrs_t1 = {0}; | |
| struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); | |
| struct cppc_cpudata *cpu_data = policy->driver_data; | |
| int ret; | |
| cpufreq_cpu_put(policy); | |
| ret = cppc_get_perf_ctrs(cpu, &fb_ctrs_t0); | |
| if (ret) | |
| return ret; | |
| udelay(2); /* 2usec delay between sampling */ | |
| ret = cppc_get_perf_ctrs(cpu, &fb_ctrs_t1); | |
| if (ret) | |
| return ret; | |
| return cppc_get_rate_from_fbctrs(cpu_data, fb_ctrs_t0, fb_ctrs_t1); | |
| } | |
| static int cppc_cpufreq_set_boost(struct cpufreq_policy *policy, int state) | |
| { | |
| struct cppc_cpudata *cpu_data = policy->driver_data; | |
| struct cppc_perf_caps *caps = &cpu_data->perf_caps; | |
| int ret; | |
| if (!boost_supported) { | |
| pr_err("BOOST not supported by CPU or firmware\n"); | |
| return -EINVAL; | |
| } | |
| if (state) | |
| policy->max = cppc_cpufreq_perf_to_khz(cpu_data, | |
| caps->highest_perf); | |
| else | |
| policy->max = cppc_cpufreq_perf_to_khz(cpu_data, | |
| caps->nominal_perf); | |
| policy->cpuinfo.max_freq = policy->max; | |
| ret = freq_qos_update_request(policy->max_freq_req, policy->max); | |
| if (ret < 0) | |
| return ret; | |
| return 0; | |
| } | |
| static ssize_t show_freqdomain_cpus(struct cpufreq_policy *policy, char *buf) | |
| { | |
| struct cppc_cpudata *cpu_data = policy->driver_data; | |
| return cpufreq_show_cpus(cpu_data->shared_cpu_map, buf); | |
| } | |
| cpufreq_freq_attr_ro(freqdomain_cpus); | |
| static struct freq_attr *cppc_cpufreq_attr[] = { | |
| &freqdomain_cpus, | |
| NULL, | |
| }; | |
| static struct cpufreq_driver cppc_cpufreq_driver = { | |
| .flags = CPUFREQ_CONST_LOOPS, | |
| .verify = cppc_verify_policy, | |
| .target = cppc_cpufreq_set_target, | |
| .get = cppc_cpufreq_get_rate, | |
| .init = cppc_cpufreq_cpu_init, | |
| .stop_cpu = cppc_cpufreq_stop_cpu, | |
| .set_boost = cppc_cpufreq_set_boost, | |
| .attr = cppc_cpufreq_attr, | |
| .name = "cppc_cpufreq", | |
| }; | |
| /* | |
| * HISI platform does not support delivered performance counter and | |
| * reference performance counter. It can calculate the performance using the | |
| * platform specific mechanism. We reuse the desired performance register to | |
| * store the real performance calculated by the platform. | |
| */ | |
| static unsigned int hisi_cppc_cpufreq_get_rate(unsigned int cpu) | |
| { | |
| struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); | |
| struct cppc_cpudata *cpu_data = policy->driver_data; | |
| u64 desired_perf; | |
| int ret; | |
| cpufreq_cpu_put(policy); | |
| ret = cppc_get_desired_perf(cpu, &desired_perf); | |
| if (ret < 0) | |
| return -EIO; | |
| return cppc_cpufreq_perf_to_khz(cpu_data, desired_perf); | |
| } | |
| static void cppc_check_hisi_workaround(void) | |
| { | |
| struct acpi_table_header *tbl; | |
| acpi_status status = AE_OK; | |
| int i; | |
| status = acpi_get_table(ACPI_SIG_PCCT, 0, &tbl); | |
| if (ACPI_FAILURE(status) || !tbl) | |
| return; | |
| for (i = 0; i < ARRAY_SIZE(wa_info); i++) { | |
| if (!memcmp(wa_info[i].oem_id, tbl->oem_id, ACPI_OEM_ID_SIZE) && | |
| !memcmp(wa_info[i].oem_table_id, tbl->oem_table_id, ACPI_OEM_TABLE_ID_SIZE) && | |
| wa_info[i].oem_revision == tbl->oem_revision) { | |
| /* Overwrite the get() callback */ | |
| cppc_cpufreq_driver.get = hisi_cppc_cpufreq_get_rate; | |
| break; | |
| } | |
| } | |
| acpi_put_table(tbl); | |
| } | |
| static int __init cppc_cpufreq_init(void) | |
| { | |
| if ((acpi_disabled) || !acpi_cpc_valid()) | |
| return -ENODEV; | |
| INIT_LIST_HEAD(&cpu_data_list); | |
| cppc_check_hisi_workaround(); | |
| return cpufreq_register_driver(&cppc_cpufreq_driver); | |
| } | |
| static inline void free_cpu_data(void) | |
| { | |
| struct cppc_cpudata *iter, *tmp; | |
| list_for_each_entry_safe(iter, tmp, &cpu_data_list, node) { | |
| free_cpumask_var(iter->shared_cpu_map); | |
| list_del(&iter->node); | |
| kfree(iter); | |
| } | |
| } | |
| static void __exit cppc_cpufreq_exit(void) | |
| { | |
| cpufreq_unregister_driver(&cppc_cpufreq_driver); | |
| free_cpu_data(); | |
| } | |
| module_exit(cppc_cpufreq_exit); | |
| MODULE_AUTHOR("Ashwin Chaugule"); | |
| MODULE_DESCRIPTION("CPUFreq driver based on the ACPI CPPC v5.0+ spec"); | |
| MODULE_LICENSE("GPL"); | |
| late_initcall(cppc_cpufreq_init); | |
| static const struct acpi_device_id cppc_acpi_ids[] __used = { | |
| {ACPI_PROCESSOR_DEVICE_HID, }, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(acpi, cppc_acpi_ids); |