| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright (c) 2007-2014 Nicira, Inc. | |
| */ | |
| #include <linux/etherdevice.h> | |
| #include <linux/if.h> | |
| #include <linux/if_vlan.h> | |
| #include <linux/jhash.h> | |
| #include <linux/kernel.h> | |
| #include <linux/list.h> | |
| #include <linux/mutex.h> | |
| #include <linux/percpu.h> | |
| #include <linux/rcupdate.h> | |
| #include <linux/rtnetlink.h> | |
| #include <linux/compat.h> | |
| #include <net/net_namespace.h> | |
| #include <linux/module.h> | |
| #include "datapath.h" | |
| #include "vport.h" | |
| #include "vport-internal_dev.h" | |
| static LIST_HEAD(vport_ops_list); | |
| /* Protected by RCU read lock for reading, ovs_mutex for writing. */ | |
| static struct hlist_head *dev_table; | |
| #define VPORT_HASH_BUCKETS 1024 | |
| /** | |
| * ovs_vport_init - initialize vport subsystem | |
| * | |
| * Called at module load time to initialize the vport subsystem. | |
| */ | |
| int ovs_vport_init(void) | |
| { | |
| dev_table = kzalloc_objs(struct hlist_head, VPORT_HASH_BUCKETS); | |
| if (!dev_table) | |
| return -ENOMEM; | |
| return 0; | |
| } | |
| /** | |
| * ovs_vport_exit - shutdown vport subsystem | |
| * | |
| * Called at module exit time to shutdown the vport subsystem. | |
| */ | |
| void ovs_vport_exit(void) | |
| { | |
| kfree(dev_table); | |
| } | |
| static struct hlist_head *hash_bucket(const struct net *net, const char *name) | |
| { | |
| unsigned int hash = jhash(name, strlen(name), (unsigned long) net); | |
| return &dev_table[hash & (VPORT_HASH_BUCKETS - 1)]; | |
| } | |
| int ovs_vport_ops_register(struct vport_ops *ops) | |
| { | |
| int err = -EEXIST; | |
| struct vport_ops *o; | |
| ovs_lock(); | |
| list_for_each_entry(o, &vport_ops_list, list) | |
| if (ops->type == o->type) | |
| goto errout; | |
| list_add_tail(&ops->list, &vport_ops_list); | |
| err = 0; | |
| errout: | |
| ovs_unlock(); | |
| return err; | |
| } | |
| void ovs_vport_ops_unregister(struct vport_ops *ops) | |
| { | |
| ovs_lock(); | |
| list_del(&ops->list); | |
| ovs_unlock(); | |
| } | |
| /** | |
| * ovs_vport_locate - find a port that has already been created | |
| * | |
| * @net: network namespace | |
| * @name: name of port to find | |
| * | |
| * Must be called with ovs or RCU read lock. | |
| */ | |
| struct vport *ovs_vport_locate(const struct net *net, const char *name) | |
| { | |
| struct hlist_head *bucket = hash_bucket(net, name); | |
| struct vport *vport; | |
| hlist_for_each_entry_rcu(vport, bucket, hash_node, | |
| lockdep_ovsl_is_held()) | |
| if (!strcmp(name, ovs_vport_name(vport)) && | |
| net_eq(ovs_dp_get_net(vport->dp), net)) | |
| return vport; | |
| return NULL; | |
| } | |
| /** | |
| * ovs_vport_alloc - allocate and initialize new vport | |
| * | |
| * @priv_size: Size of private data area to allocate. | |
| * @ops: vport device ops | |
| * @parms: information about new vport. | |
| * | |
| * Allocate and initialize a new vport defined by @ops. The vport will contain | |
| * a private data area of size @priv_size that can be accessed using | |
| * vport_priv(). Some parameters of the vport will be initialized from @parms. | |
| * @vports that are no longer needed should be released with | |
| * vport_free(). | |
| */ | |
| struct vport *ovs_vport_alloc(int priv_size, const struct vport_ops *ops, | |
| const struct vport_parms *parms) | |
| { | |
| struct vport *vport; | |
| size_t alloc_size; | |
| int err; | |
| alloc_size = sizeof(struct vport); | |
| if (priv_size) { | |
| alloc_size = ALIGN(alloc_size, VPORT_ALIGN); | |
| alloc_size += priv_size; | |
| } | |
| vport = kzalloc(alloc_size, GFP_KERNEL); | |
| if (!vport) | |
| return ERR_PTR(-ENOMEM); | |
| vport->upcall_stats = netdev_alloc_pcpu_stats(struct vport_upcall_stats_percpu); | |
| if (!vport->upcall_stats) { | |
| err = -ENOMEM; | |
| goto err_kfree_vport; | |
| } | |
| vport->dp = parms->dp; | |
| vport->port_no = parms->port_no; | |
| vport->ops = ops; | |
| INIT_HLIST_NODE(&vport->dp_hash_node); | |
| if (ovs_vport_set_upcall_portids(vport, parms->upcall_portids)) { | |
| err = -EINVAL; | |
| goto err_free_percpu; | |
| } | |
| return vport; | |
| err_free_percpu: | |
| free_percpu(vport->upcall_stats); | |
| err_kfree_vport: | |
| kfree(vport); | |
| return ERR_PTR(err); | |
| } | |
| /** | |
| * ovs_vport_free - uninitialize and free vport | |
| * | |
| * @vport: vport to free | |
| * | |
| * Frees a vport allocated with vport_alloc() when it is no longer needed. | |
| * | |
| * The caller must ensure that an RCU grace period has passed since the last | |
| * time @vport was in a datapath. | |
| */ | |
| void ovs_vport_free(struct vport *vport) | |
| { | |
| /* vport is freed from RCU callback or error path, Therefore | |
| * it is safe to use raw dereference. | |
| */ | |
| kfree(rcu_dereference_raw(vport->upcall_portids)); | |
| free_percpu(vport->upcall_stats); | |
| kfree(vport); | |
| } | |
| static struct vport_ops *ovs_vport_lookup(const struct vport_parms *parms) | |
| { | |
| struct vport_ops *ops; | |
| list_for_each_entry(ops, &vport_ops_list, list) | |
| if (ops->type == parms->type) | |
| return ops; | |
| return NULL; | |
| } | |
| /** | |
| * ovs_vport_add - add vport device (for kernel callers) | |
| * | |
| * @parms: Information about new vport. | |
| * | |
| * Creates a new vport with the specified configuration (which is dependent on | |
| * device type). ovs_mutex must be held. | |
| */ | |
| struct vport *ovs_vport_add(const struct vport_parms *parms) | |
| { | |
| struct vport_ops *ops; | |
| struct vport *vport; | |
| ops = ovs_vport_lookup(parms); | |
| if (ops) { | |
| struct hlist_head *bucket; | |
| vport = ops->create(parms); | |
| if (IS_ERR(vport)) | |
| return vport; | |
| bucket = hash_bucket(ovs_dp_get_net(vport->dp), | |
| ovs_vport_name(vport)); | |
| hlist_add_head_rcu(&vport->hash_node, bucket); | |
| return vport; | |
| } | |
| return ERR_PTR(-EAFNOSUPPORT); | |
| } | |
| /** | |
| * ovs_vport_del - delete existing vport device | |
| * | |
| * @vport: vport to delete. | |
| * | |
| * Detaches @vport from its datapath and destroys it. ovs_mutex must | |
| * be held. | |
| */ | |
| void ovs_vport_del(struct vport *vport) | |
| { | |
| hlist_del_rcu(&vport->hash_node); | |
| vport->ops->destroy(vport); | |
| } | |
| /** | |
| * ovs_vport_get_stats - retrieve device stats | |
| * | |
| * @vport: vport from which to retrieve the stats | |
| * @stats: location to store stats | |
| * | |
| * Retrieves transmit, receive, and error stats for the given device. | |
| * | |
| * Must be called with ovs_mutex or rcu_read_lock. | |
| */ | |
| void ovs_vport_get_stats(struct vport *vport, struct ovs_vport_stats *stats) | |
| { | |
| const struct rtnl_link_stats64 *dev_stats; | |
| struct rtnl_link_stats64 temp; | |
| dev_stats = dev_get_stats(vport->dev, &temp); | |
| stats->rx_errors = dev_stats->rx_errors; | |
| stats->tx_errors = dev_stats->tx_errors; | |
| stats->tx_dropped = dev_stats->tx_dropped; | |
| stats->rx_dropped = dev_stats->rx_dropped; | |
| stats->rx_bytes = dev_stats->rx_bytes; | |
| stats->rx_packets = dev_stats->rx_packets; | |
| stats->tx_bytes = dev_stats->tx_bytes; | |
| stats->tx_packets = dev_stats->tx_packets; | |
| } | |
| /** | |
| * ovs_vport_get_upcall_stats - retrieve upcall stats | |
| * | |
| * @vport: vport from which to retrieve the stats. | |
| * @skb: sk_buff where upcall stats should be appended. | |
| * | |
| * Retrieves upcall stats for the given device. | |
| * | |
| * Must be called with ovs_mutex or rcu_read_lock. | |
| */ | |
| int ovs_vport_get_upcall_stats(struct vport *vport, struct sk_buff *skb) | |
| { | |
| u64 tx_success = 0, tx_fail = 0; | |
| struct nlattr *nla; | |
| int i; | |
| for_each_possible_cpu(i) { | |
| const struct vport_upcall_stats_percpu *stats; | |
| u64 n_success, n_fail; | |
| unsigned int start; | |
| stats = per_cpu_ptr(vport->upcall_stats, i); | |
| do { | |
| start = u64_stats_fetch_begin(&stats->syncp); | |
| n_success = u64_stats_read(&stats->n_success); | |
| n_fail = u64_stats_read(&stats->n_fail); | |
| } while (u64_stats_fetch_retry(&stats->syncp, start)); | |
| tx_success += n_success; | |
| tx_fail += n_fail; | |
| } | |
| nla = nla_nest_start_noflag(skb, OVS_VPORT_ATTR_UPCALL_STATS); | |
| if (!nla) | |
| return -EMSGSIZE; | |
| if (nla_put_u64_64bit(skb, OVS_VPORT_UPCALL_ATTR_SUCCESS, tx_success, | |
| OVS_VPORT_ATTR_PAD)) { | |
| nla_nest_cancel(skb, nla); | |
| return -EMSGSIZE; | |
| } | |
| if (nla_put_u64_64bit(skb, OVS_VPORT_UPCALL_ATTR_FAIL, tx_fail, | |
| OVS_VPORT_ATTR_PAD)) { | |
| nla_nest_cancel(skb, nla); | |
| return -EMSGSIZE; | |
| } | |
| nla_nest_end(skb, nla); | |
| return 0; | |
| } | |
| /** | |
| * ovs_vport_set_upcall_portids - set upcall portids of @vport. | |
| * | |
| * @vport: vport to modify. | |
| * @ids: new configuration, an array of port ids. | |
| * | |
| * Sets the vport's upcall_portids to @ids. | |
| * | |
| * Returns 0 if successful, -EINVAL if @ids is zero length or cannot be parsed | |
| * as an array of U32. | |
| * | |
| * Must be called with ovs_mutex. | |
| */ | |
| int ovs_vport_set_upcall_portids(struct vport *vport, const struct nlattr *ids) | |
| { | |
| struct vport_portids *old, *vport_portids; | |
| if (!nla_len(ids) || nla_len(ids) % sizeof(u32)) | |
| return -EINVAL; | |
| if (nla_len(ids) / sizeof(u32) > nr_cpu_ids) | |
| return -EINVAL; | |
| old = ovsl_dereference(vport->upcall_portids); | |
| vport_portids = kmalloc(sizeof(*vport_portids) + nla_len(ids), | |
| GFP_KERNEL); | |
| if (!vport_portids) | |
| return -ENOMEM; | |
| vport_portids->n_ids = nla_len(ids) / sizeof(u32); | |
| vport_portids->rn_ids = reciprocal_value(vport_portids->n_ids); | |
| nla_memcpy(vport_portids->ids, ids, nla_len(ids)); | |
| rcu_assign_pointer(vport->upcall_portids, vport_portids); | |
| if (old) | |
| kfree_rcu(old, rcu); | |
| return 0; | |
| } | |
| /** | |
| * ovs_vport_get_upcall_portids - get the upcall_portids of @vport. | |
| * | |
| * @vport: vport from which to retrieve the portids. | |
| * @skb: sk_buff where portids should be appended. | |
| * | |
| * Retrieves the configuration of the given vport, appending the | |
| * %OVS_VPORT_ATTR_UPCALL_PID attribute which is the array of upcall | |
| * portids to @skb. | |
| * | |
| * Returns 0 if successful, -EMSGSIZE if @skb has insufficient room. | |
| * If an error occurs, @skb is left unmodified. Must be called with | |
| * ovs_mutex or rcu_read_lock. | |
| */ | |
| int ovs_vport_get_upcall_portids(const struct vport *vport, | |
| struct sk_buff *skb) | |
| { | |
| struct vport_portids *ids; | |
| ids = rcu_dereference_ovsl(vport->upcall_portids); | |
| if (vport->dp->user_features & OVS_DP_F_VPORT_PIDS) | |
| return nla_put(skb, OVS_VPORT_ATTR_UPCALL_PID, | |
| ids->n_ids * sizeof(u32), (void *)ids->ids); | |
| else | |
| return nla_put_u32(skb, OVS_VPORT_ATTR_UPCALL_PID, ids->ids[0]); | |
| } | |
| /** | |
| * ovs_vport_find_upcall_portid - find the upcall portid to send upcall. | |
| * | |
| * @vport: vport from which the missed packet is received. | |
| * @skb: skb that the missed packet was received. | |
| * | |
| * Uses the skb_get_hash() to select the upcall portid to send the | |
| * upcall. | |
| * | |
| * Returns the portid of the target socket. Must be called with rcu_read_lock. | |
| */ | |
| u32 ovs_vport_find_upcall_portid(const struct vport *vport, | |
| struct sk_buff *skb) | |
| { | |
| struct vport_portids *ids; | |
| u32 ids_index; | |
| u32 hash; | |
| ids = rcu_dereference(vport->upcall_portids); | |
| /* If there is only one portid, select it in the fast-path. */ | |
| if (ids->n_ids == 1) | |
| return ids->ids[0]; | |
| hash = skb_get_hash(skb); | |
| ids_index = hash - ids->n_ids * reciprocal_divide(hash, ids->rn_ids); | |
| return ids->ids[ids_index]; | |
| } | |
| /** | |
| * ovs_vport_receive - pass up received packet to the datapath for processing | |
| * | |
| * @vport: vport that received the packet | |
| * @skb: skb that was received | |
| * @tun_info: tunnel (if any) that carried packet | |
| * | |
| * Must be called with rcu_read_lock. The packet cannot be shared and | |
| * skb->data should point to the Ethernet header. | |
| */ | |
| int ovs_vport_receive(struct vport *vport, struct sk_buff *skb, | |
| const struct ip_tunnel_info *tun_info) | |
| { | |
| struct sw_flow_key key; | |
| int error; | |
| OVS_CB(skb)->input_vport = vport; | |
| OVS_CB(skb)->mru = 0; | |
| OVS_CB(skb)->cutlen = U32_MAX; | |
| OVS_CB(skb)->probability = 0; | |
| OVS_CB(skb)->upcall_pid = 0; | |
| if (unlikely(dev_net(skb->dev) != ovs_dp_get_net(vport->dp))) { | |
| u32 mark; | |
| mark = skb->mark; | |
| skb_scrub_packet(skb, true); | |
| skb->mark = mark; | |
| tun_info = NULL; | |
| } | |
| /* Extract flow from 'skb' into 'key'. */ | |
| error = ovs_flow_key_extract(tun_info, skb, &key); | |
| if (unlikely(error)) { | |
| kfree_skb(skb); | |
| return error; | |
| } | |
| ovs_dp_process_packet(skb, &key); | |
| return 0; | |
| } | |
| static int packet_length(const struct sk_buff *skb, | |
| struct net_device *dev) | |
| { | |
| int length = skb->len - dev->hard_header_len; | |
| if (!skb_vlan_tag_present(skb) && | |
| eth_type_vlan(skb->protocol)) | |
| length -= VLAN_HLEN; | |
| /* Don't subtract for multiple VLAN tags. Most (all?) drivers allow | |
| * (ETH_LEN + VLAN_HLEN) in addition to the mtu value, but almost none | |
| * account for 802.1ad. e.g. is_skb_forwardable(). | |
| */ | |
| return length > 0 ? length : 0; | |
| } | |
| void ovs_vport_send(struct vport *vport, struct sk_buff *skb, u8 mac_proto) | |
| { | |
| int mtu = vport->dev->mtu; | |
| switch (vport->dev->type) { | |
| case ARPHRD_NONE: | |
| if (mac_proto == MAC_PROTO_ETHERNET) { | |
| skb_reset_network_header(skb); | |
| skb_reset_mac_len(skb); | |
| skb->protocol = htons(ETH_P_TEB); | |
| } else if (mac_proto != MAC_PROTO_NONE) { | |
| WARN_ON_ONCE(1); | |
| goto drop; | |
| } | |
| break; | |
| case ARPHRD_ETHER: | |
| if (mac_proto != MAC_PROTO_ETHERNET) | |
| goto drop; | |
| break; | |
| default: | |
| goto drop; | |
| } | |
| if (unlikely(packet_length(skb, vport->dev) > mtu && | |
| !skb_is_gso(skb))) { | |
| vport->dev->stats.tx_errors++; | |
| if (vport->dev->flags & IFF_UP) | |
| net_warn_ratelimited("%s: dropped over-mtu packet: " | |
| "%d > %d\n", vport->dev->name, | |
| packet_length(skb, vport->dev), | |
| mtu); | |
| goto drop; | |
| } | |
| skb->dev = vport->dev; | |
| skb_clear_tstamp(skb); | |
| vport->ops->send(skb); | |
| return; | |
| drop: | |
| kfree_skb(skb); | |
| } |