| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. | |
| */ | |
| #include <linux/suspend.h> | |
| #include <linux/clk.h> | |
| #include <linux/io.h> | |
| #include <linux/err.h> | |
| #include <linux/export.h> | |
| #include <linux/genalloc.h> | |
| #include <linux/of.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/platform_device.h> | |
| #include <asm/cacheflush.h> | |
| #include <asm/fncpy.h> | |
| #include <asm/system_misc.h> | |
| #include <asm/tlbflush.h> | |
| #include "common.h" | |
| #include "cpuidle.h" | |
| #include "hardware.h" | |
| #define MXC_CCM_CLPCR 0x54 | |
| #define MXC_CCM_CLPCR_LPM_OFFSET 0 | |
| #define MXC_CCM_CLPCR_LPM_MASK 0x3 | |
| #define MXC_CCM_CLPCR_STBY_COUNT_OFFSET 9 | |
| #define MXC_CCM_CLPCR_VSTBY (0x1 << 8) | |
| #define MXC_CCM_CLPCR_SBYOS (0x1 << 6) | |
| #define MXC_CORTEXA8_PLAT_LPC 0xc | |
| #define MXC_CORTEXA8_PLAT_LPC_DSM (1 << 0) | |
| #define MXC_CORTEXA8_PLAT_LPC_DBG_DSM (1 << 1) | |
| #define MXC_SRPG_NEON_SRPGCR 0x280 | |
| #define MXC_SRPG_ARM_SRPGCR 0x2a0 | |
| #define MXC_SRPG_EMPGC0_SRPGCR 0x2c0 | |
| #define MXC_SRPG_EMPGC1_SRPGCR 0x2d0 | |
| #define MXC_SRPGCR_PCR 1 | |
| /* | |
| * The WAIT_UNCLOCKED_POWER_OFF state only requires <= 500ns to exit. | |
| * This is also the lowest power state possible without affecting | |
| * non-cpu parts of the system. For these reasons, imx5 should default | |
| * to always using this state for cpu idling. The PM_SUSPEND_STANDBY also | |
| * uses this state and needs to take no action when registers remain configured | |
| * for this state. | |
| */ | |
| #define IMX5_DEFAULT_CPU_IDLE_STATE WAIT_UNCLOCKED_POWER_OFF | |
| struct imx5_suspend_io_state { | |
| u32 offset; | |
| u32 clear; | |
| u32 set; | |
| u32 saved_value; | |
| }; | |
| struct imx5_pm_data { | |
| phys_addr_t ccm_addr; | |
| phys_addr_t cortex_addr; | |
| phys_addr_t gpc_addr; | |
| phys_addr_t m4if_addr; | |
| phys_addr_t iomuxc_addr; | |
| void (*suspend_asm)(void __iomem *ocram_vbase); | |
| const u32 *suspend_asm_sz; | |
| const struct imx5_suspend_io_state *suspend_io_config; | |
| int suspend_io_count; | |
| }; | |
| static const struct imx5_suspend_io_state imx53_suspend_io_config[] = { | |
| #define MX53_DSE_HIGHZ_MASK (0x7 << 19) | |
| {.offset = 0x584, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM0 */ | |
| {.offset = 0x594, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM1 */ | |
| {.offset = 0x560, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM2 */ | |
| {.offset = 0x554, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM3 */ | |
| {.offset = 0x574, .clear = MX53_DSE_HIGHZ_MASK}, /* CAS */ | |
| {.offset = 0x588, .clear = MX53_DSE_HIGHZ_MASK}, /* RAS */ | |
| {.offset = 0x578, .clear = MX53_DSE_HIGHZ_MASK}, /* SDCLK_0 */ | |
| {.offset = 0x570, .clear = MX53_DSE_HIGHZ_MASK}, /* SDCLK_1 */ | |
| {.offset = 0x580, .clear = MX53_DSE_HIGHZ_MASK}, /* SDODT0 */ | |
| {.offset = 0x564, .clear = MX53_DSE_HIGHZ_MASK}, /* SDODT1 */ | |
| {.offset = 0x57c, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS0 */ | |
| {.offset = 0x590, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS1 */ | |
| {.offset = 0x568, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS2 */ | |
| {.offset = 0x558, .clear = MX53_DSE_HIGHZ_MASK}, /* SDSQ3 */ | |
| {.offset = 0x6f0, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_ADDS */ | |
| {.offset = 0x718, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_BODS */ | |
| {.offset = 0x71c, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B1DS */ | |
| {.offset = 0x728, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B2DS */ | |
| {.offset = 0x72c, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B3DS */ | |
| /* Controls the CKE signal which is required to leave self refresh */ | |
| {.offset = 0x720, .clear = MX53_DSE_HIGHZ_MASK, .set = 1 << 19}, /* CTLDS */ | |
| }; | |
| static const struct imx5_pm_data imx51_pm_data __initconst = { | |
| .ccm_addr = 0x73fd4000, | |
| .cortex_addr = 0x83fa0000, | |
| .gpc_addr = 0x73fd8000, | |
| }; | |
| static const struct imx5_pm_data imx53_pm_data __initconst = { | |
| .ccm_addr = 0x53fd4000, | |
| .cortex_addr = 0x63fa0000, | |
| .gpc_addr = 0x53fd8000, | |
| .m4if_addr = 0x63fd8000, | |
| .iomuxc_addr = 0x53fa8000, | |
| .suspend_asm = &imx53_suspend, | |
| .suspend_asm_sz = &imx53_suspend_sz, | |
| .suspend_io_config = imx53_suspend_io_config, | |
| .suspend_io_count = ARRAY_SIZE(imx53_suspend_io_config), | |
| }; | |
| #define MX5_MAX_SUSPEND_IOSTATE ARRAY_SIZE(imx53_suspend_io_config) | |
| /* | |
| * This structure is for passing necessary data for low level ocram | |
| * suspend code(arch/arm/mach-imx/suspend-imx53.S), if this struct | |
| * definition is changed, the offset definition in that file | |
| * must be also changed accordingly otherwise, the suspend to ocram | |
| * function will be broken! | |
| */ | |
| struct imx5_cpu_suspend_info { | |
| void __iomem *m4if_base; | |
| void __iomem *iomuxc_base; | |
| u32 io_count; | |
| struct imx5_suspend_io_state io_state[MX5_MAX_SUSPEND_IOSTATE]; | |
| } __aligned(8); | |
| static void __iomem *ccm_base; | |
| static void __iomem *cortex_base; | |
| static void __iomem *gpc_base; | |
| static void __iomem *suspend_ocram_base; | |
| static void (*imx5_suspend_in_ocram_fn)(void __iomem *ocram_vbase); | |
| /* | |
| * set cpu low power mode before WFI instruction. This function is called | |
| * mx5 because it can be used for mx51, and mx53. | |
| */ | |
| static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) | |
| { | |
| u32 plat_lpc, arm_srpgcr, ccm_clpcr; | |
| u32 empgc0, empgc1; | |
| int stop_mode = 0; | |
| /* always allow platform to issue a deep sleep mode request */ | |
| plat_lpc = imx_readl(cortex_base + MXC_CORTEXA8_PLAT_LPC) & | |
| ~(MXC_CORTEXA8_PLAT_LPC_DSM); | |
| ccm_clpcr = imx_readl(ccm_base + MXC_CCM_CLPCR) & | |
| ~(MXC_CCM_CLPCR_LPM_MASK); | |
| arm_srpgcr = imx_readl(gpc_base + MXC_SRPG_ARM_SRPGCR) & | |
| ~(MXC_SRPGCR_PCR); | |
| empgc0 = imx_readl(gpc_base + MXC_SRPG_EMPGC0_SRPGCR) & | |
| ~(MXC_SRPGCR_PCR); | |
| empgc1 = imx_readl(gpc_base + MXC_SRPG_EMPGC1_SRPGCR) & | |
| ~(MXC_SRPGCR_PCR); | |
| switch (mode) { | |
| case WAIT_CLOCKED: | |
| break; | |
| case WAIT_UNCLOCKED: | |
| ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET; | |
| break; | |
| case WAIT_UNCLOCKED_POWER_OFF: | |
| case STOP_POWER_OFF: | |
| plat_lpc |= MXC_CORTEXA8_PLAT_LPC_DSM | |
| | MXC_CORTEXA8_PLAT_LPC_DBG_DSM; | |
| if (mode == WAIT_UNCLOCKED_POWER_OFF) { | |
| ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET; | |
| ccm_clpcr &= ~MXC_CCM_CLPCR_VSTBY; | |
| ccm_clpcr &= ~MXC_CCM_CLPCR_SBYOS; | |
| stop_mode = 0; | |
| } else { | |
| ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET; | |
| ccm_clpcr |= 0x3 << MXC_CCM_CLPCR_STBY_COUNT_OFFSET; | |
| ccm_clpcr |= MXC_CCM_CLPCR_VSTBY; | |
| ccm_clpcr |= MXC_CCM_CLPCR_SBYOS; | |
| stop_mode = 1; | |
| } | |
| arm_srpgcr |= MXC_SRPGCR_PCR; | |
| break; | |
| case STOP_POWER_ON: | |
| ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET; | |
| break; | |
| default: | |
| printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode); | |
| return; | |
| } | |
| imx_writel(plat_lpc, cortex_base + MXC_CORTEXA8_PLAT_LPC); | |
| imx_writel(ccm_clpcr, ccm_base + MXC_CCM_CLPCR); | |
| imx_writel(arm_srpgcr, gpc_base + MXC_SRPG_ARM_SRPGCR); | |
| imx_writel(arm_srpgcr, gpc_base + MXC_SRPG_NEON_SRPGCR); | |
| if (stop_mode) { | |
| empgc0 |= MXC_SRPGCR_PCR; | |
| empgc1 |= MXC_SRPGCR_PCR; | |
| imx_writel(empgc0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR); | |
| imx_writel(empgc1, gpc_base + MXC_SRPG_EMPGC1_SRPGCR); | |
| } | |
| } | |
| static int mx5_suspend_enter(suspend_state_t state) | |
| { | |
| switch (state) { | |
| case PM_SUSPEND_MEM: | |
| mx5_cpu_lp_set(STOP_POWER_OFF); | |
| break; | |
| case PM_SUSPEND_STANDBY: | |
| /* DEFAULT_IDLE_STATE already configured */ | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| if (state == PM_SUSPEND_MEM) { | |
| local_flush_tlb_all(); | |
| flush_cache_all(); | |
| /*clear the EMPGC0/1 bits */ | |
| imx_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR); | |
| imx_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR); | |
| if (imx5_suspend_in_ocram_fn) | |
| imx5_suspend_in_ocram_fn(suspend_ocram_base); | |
| else | |
| cpu_do_idle(); | |
| } else { | |
| cpu_do_idle(); | |
| } | |
| /* return registers to default idle state */ | |
| mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE); | |
| return 0; | |
| } | |
| static int mx5_pm_valid(suspend_state_t state) | |
| { | |
| return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX); | |
| } | |
| static const struct platform_suspend_ops mx5_suspend_ops = { | |
| .valid = mx5_pm_valid, | |
| .enter = mx5_suspend_enter, | |
| }; | |
| static inline int imx5_cpu_do_idle(void) | |
| { | |
| int ret = tzic_enable_wake(); | |
| if (likely(!ret)) | |
| cpu_do_idle(); | |
| return ret; | |
| } | |
| static void imx5_pm_idle(void) | |
| { | |
| imx5_cpu_do_idle(); | |
| } | |
| static int __init imx_suspend_alloc_ocram( | |
| size_t size, | |
| void __iomem **virt_out, | |
| phys_addr_t *phys_out) | |
| { | |
| struct device_node *node; | |
| struct platform_device *pdev; | |
| struct gen_pool *ocram_pool; | |
| unsigned long ocram_base; | |
| void __iomem *virt; | |
| phys_addr_t phys; | |
| int ret = 0; | |
| /* Copied from imx6: TODO factorize */ | |
| node = of_find_compatible_node(NULL, NULL, "mmio-sram"); | |
| if (!node) { | |
| pr_warn("%s: failed to find ocram node!\n", __func__); | |
| return -ENODEV; | |
| } | |
| pdev = of_find_device_by_node(node); | |
| if (!pdev) { | |
| pr_warn("%s: failed to find ocram device!\n", __func__); | |
| ret = -ENODEV; | |
| goto put_node; | |
| } | |
| ocram_pool = gen_pool_get(&pdev->dev, NULL); | |
| if (!ocram_pool) { | |
| pr_warn("%s: ocram pool unavailable!\n", __func__); | |
| ret = -ENODEV; | |
| goto put_device; | |
| } | |
| ocram_base = gen_pool_alloc(ocram_pool, size); | |
| if (!ocram_base) { | |
| pr_warn("%s: unable to alloc ocram!\n", __func__); | |
| ret = -ENOMEM; | |
| goto put_device; | |
| } | |
| phys = gen_pool_virt_to_phys(ocram_pool, ocram_base); | |
| virt = __arm_ioremap_exec(phys, size, false); | |
| if (phys_out) | |
| *phys_out = phys; | |
| if (virt_out) | |
| *virt_out = virt; | |
| put_device: | |
| put_device(&pdev->dev); | |
| put_node: | |
| of_node_put(node); | |
| return ret; | |
| } | |
| static int __init imx5_suspend_init(const struct imx5_pm_data *soc_data) | |
| { | |
| struct imx5_cpu_suspend_info *suspend_info; | |
| int ret; | |
| /* Need this to avoid compile error due to const typeof in fncpy.h */ | |
| void (*suspend_asm)(void __iomem *) = soc_data->suspend_asm; | |
| if (!suspend_asm) | |
| return 0; | |
| if (!soc_data->suspend_asm_sz || !*soc_data->suspend_asm_sz) | |
| return -EINVAL; | |
| ret = imx_suspend_alloc_ocram( | |
| *soc_data->suspend_asm_sz + sizeof(*suspend_info), | |
| &suspend_ocram_base, NULL); | |
| if (ret) | |
| return ret; | |
| suspend_info = suspend_ocram_base; | |
| suspend_info->io_count = soc_data->suspend_io_count; | |
| memcpy(suspend_info->io_state, soc_data->suspend_io_config, | |
| sizeof(*suspend_info->io_state) * soc_data->suspend_io_count); | |
| suspend_info->m4if_base = ioremap(soc_data->m4if_addr, SZ_16K); | |
| if (!suspend_info->m4if_base) { | |
| ret = -ENOMEM; | |
| goto failed_map_m4if; | |
| } | |
| suspend_info->iomuxc_base = ioremap(soc_data->iomuxc_addr, SZ_16K); | |
| if (!suspend_info->iomuxc_base) { | |
| ret = -ENOMEM; | |
| goto failed_map_iomuxc; | |
| } | |
| imx5_suspend_in_ocram_fn = fncpy( | |
| suspend_ocram_base + sizeof(*suspend_info), | |
| suspend_asm, | |
| *soc_data->suspend_asm_sz); | |
| return 0; | |
| failed_map_iomuxc: | |
| iounmap(suspend_info->m4if_base); | |
| failed_map_m4if: | |
| return ret; | |
| } | |
| static int __init imx5_pm_common_init(const struct imx5_pm_data *data) | |
| { | |
| int ret; | |
| struct clk *gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); | |
| if (IS_ERR(gpc_dvfs_clk)) | |
| return PTR_ERR(gpc_dvfs_clk); | |
| ret = clk_prepare_enable(gpc_dvfs_clk); | |
| if (ret) | |
| return ret; | |
| arm_pm_idle = imx5_pm_idle; | |
| ccm_base = ioremap(data->ccm_addr, SZ_16K); | |
| cortex_base = ioremap(data->cortex_addr, SZ_16K); | |
| gpc_base = ioremap(data->gpc_addr, SZ_16K); | |
| WARN_ON(!ccm_base || !cortex_base || !gpc_base); | |
| /* Set the registers to the default cpu idle state. */ | |
| mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE); | |
| ret = imx5_cpuidle_init(); | |
| if (ret) | |
| pr_warn("%s: cpuidle init failed %d\n", __func__, ret); | |
| ret = imx5_suspend_init(data); | |
| if (ret) | |
| pr_warn("%s: No DDR LPM support with suspend %d!\n", | |
| __func__, ret); | |
| suspend_set_ops(&mx5_suspend_ops); | |
| return 0; | |
| } | |
| void __init imx51_pm_init(void) | |
| { | |
| if (IS_ENABLED(CONFIG_SOC_IMX51)) | |
| imx5_pm_common_init(&imx51_pm_data); | |
| } | |
| void __init imx53_pm_init(void) | |
| { | |
| if (IS_ENABLED(CONFIG_SOC_IMX53)) | |
| imx5_pm_common_init(&imx53_pm_data); | |
| } |