| # SPDX-License-Identifier: GPL-2.0 | |
| if MMU | |
| config ARCH_MAY_HAVE_PC_FDC | |
| bool | |
| depends on BROKEN && (Q40 || SUN3X) | |
| default y | |
| menu "Platform devices" | |
| config HEARTBEAT | |
| bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40 | |
| default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300 | |
| help | |
| Use the power-on LED on your machine as a load meter. The exact | |
| behavior is platform-dependent, but normally the flash frequency is | |
| a hyperbolic function of the 5-minute load average. | |
| # We have a dedicated heartbeat LED. :-) | |
| config PROC_HARDWARE | |
| bool "/proc/hardware support" | |
| depends on PROC_FS | |
| help | |
| Say Y here to support the /proc/hardware file, which gives you | |
| access to information about the machine you're running on, | |
| including the model, CPU, MMU, clock speed, BogoMIPS rating, | |
| and memory size. | |
| config NATFEAT | |
| bool "ARAnyM emulator support" | |
| depends on ATARI | |
| help | |
| This option enables support for ARAnyM native features, such as | |
| access to a disk image as /dev/hda. | |
| config NFBLOCK | |
| tristate "NatFeat block device support" | |
| depends on BLOCK && NATFEAT | |
| help | |
| Say Y to include support for the ARAnyM NatFeat block device | |
| which allows direct access to the hard drives without using | |
| the hardware emulation. | |
| config NFCON | |
| tristate "NatFeat console driver" | |
| depends on TTY && NATFEAT | |
| help | |
| Say Y to include support for the ARAnyM NatFeat console driver | |
| which allows the console output to be redirected to the stderr | |
| output of ARAnyM. | |
| config NFETH | |
| tristate "NatFeat Ethernet support" | |
| depends on ETHERNET && NATFEAT | |
| help | |
| Say Y to include support for the ARAnyM NatFeat network device | |
| which will emulate a regular ethernet device while presenting an | |
| ethertap device to the host system. | |
| config ATARI_ETHERNAT | |
| bool "Atari EtherNAT Ethernet support" | |
| depends on ATARI | |
| help | |
| Say Y to include support for the EtherNAT network adapter for the | |
| CT/60 extension port. | |
| To compile the actual ethernet driver, choose Y or M for the SMC91X | |
| option in the network device section; the module will be called smc91x. | |
| config ATARI_ETHERNEC | |
| bool "Atari EtherNEC Ethernet support" | |
| depends on ATARI_ROM_ISA | |
| help | |
| Say Y to include support for the EtherNEC network adapter for the | |
| ROM port. The driver works by polling instead of interrupts, so it | |
| is quite slow. | |
| This driver also supports the ethernet part of the NetUSBee ROM | |
| port combined Ethernet/USB adapter. | |
| To compile the actual ethernet driver, choose Y or M in for the NE2000 | |
| option in the network device section; the module will be called ne. | |
| endmenu | |
| menu "Character devices" | |
| config ATARI_DSP56K | |
| tristate "Atari DSP56k support" | |
| depends on ATARI | |
| help | |
| If you want to be able to use the DSP56001 in Falcons, say Y. This | |
| driver is still experimental, and if you don't know what it is, or | |
| if you don't have this processor, just say N. | |
| To compile this driver as a module, choose M here. | |
| config AMIGA_BUILTIN_SERIAL | |
| tristate "Amiga builtin serial support" | |
| depends on AMIGA && TTY | |
| help | |
| If you want to use your Amiga's built-in serial port in Linux, | |
| answer Y. | |
| To compile this driver as a module, choose M here. | |
| config HPDCA | |
| tristate "HP DCA serial support" | |
| depends on DIO && SERIAL_8250 | |
| help | |
| If you want to use the internal "DCA" serial ports on an HP300 | |
| machine, say Y here. | |
| config HPAPCI | |
| tristate "HP APCI serial support" | |
| depends on HP300 && SERIAL_8250 | |
| help | |
| If you want to use the internal "APCI" serial ports on an HP400 | |
| machine, say Y here. | |
| config SERIAL_CONSOLE | |
| bool "Support for serial port console" | |
| depends on AMIGA_BUILTIN_SERIAL=y | |
| help | |
| If you say Y here, it will be possible to use a serial port as the | |
| system console (the system console is the device which receives all | |
| kernel messages and warnings and which allows logins in single user | |
| mode). This could be useful if some terminal or printer is connected | |
| to that serial port. | |
| Even if you say Y here, the currently visible virtual console | |
| (/dev/tty0) will still be used as the system console by default, but | |
| you can alter that using a kernel command line option such as | |
| "console=ttyS1". (Try "man bootparam" or see the documentation of | |
| your boot loader about how to pass options to the kernel at boot | |
| time.) | |
| If you don't have a graphical console and you say Y here, the | |
| kernel will automatically use the first serial line, /dev/ttyS0, as | |
| system console. | |
| If unsure, say N. | |
| endmenu | |
| endif |