| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * WM831x clock control | |
| * | |
| * Copyright 2011-2 Wolfson Microelectronics PLC. | |
| * | |
| * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> | |
| */ | |
| #include <linux/clk-provider.h> | |
| #include <linux/delay.h> | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/mfd/wm831x/core.h> | |
| struct wm831x_clk { | |
| struct wm831x *wm831x; | |
| struct clk_hw xtal_hw; | |
| struct clk_hw fll_hw; | |
| struct clk_hw clkout_hw; | |
| bool xtal_ena; | |
| }; | |
| static int wm831x_xtal_is_prepared(struct clk_hw *hw) | |
| { | |
| struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, | |
| xtal_hw); | |
| return clkdata->xtal_ena; | |
| } | |
| static unsigned long wm831x_xtal_recalc_rate(struct clk_hw *hw, | |
| unsigned long parent_rate) | |
| { | |
| struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, | |
| xtal_hw); | |
| if (clkdata->xtal_ena) | |
| return 32768; | |
| else | |
| return 0; | |
| } | |
| static const struct clk_ops wm831x_xtal_ops = { | |
| .is_prepared = wm831x_xtal_is_prepared, | |
| .recalc_rate = wm831x_xtal_recalc_rate, | |
| }; | |
| static const struct clk_init_data wm831x_xtal_init = { | |
| .name = "xtal", | |
| .ops = &wm831x_xtal_ops, | |
| }; | |
| static const unsigned long wm831x_fll_auto_rates[] = { | |
| 2048000, | |
| 11289600, | |
| 12000000, | |
| 12288000, | |
| 19200000, | |
| 22579600, | |
| 24000000, | |
| 24576000, | |
| }; | |
| static int wm831x_fll_is_prepared(struct clk_hw *hw) | |
| { | |
| struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, | |
| fll_hw); | |
| struct wm831x *wm831x = clkdata->wm831x; | |
| int ret; | |
| ret = wm831x_reg_read(wm831x, WM831X_FLL_CONTROL_1); | |
| if (ret < 0) { | |
| dev_err(wm831x->dev, "Unable to read FLL_CONTROL_1: %d\n", | |
| ret); | |
| return true; | |
| } | |
| return (ret & WM831X_FLL_ENA) != 0; | |
| } | |
| static int wm831x_fll_prepare(struct clk_hw *hw) | |
| { | |
| struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, | |
| fll_hw); | |
| struct wm831x *wm831x = clkdata->wm831x; | |
| int ret; | |
| ret = wm831x_set_bits(wm831x, WM831X_FLL_CONTROL_1, | |
| WM831X_FLL_ENA, WM831X_FLL_ENA); | |
| if (ret != 0) | |
| dev_crit(wm831x->dev, "Failed to enable FLL: %d\n", ret); | |
| /* wait 2-3 ms for new frequency taking effect */ | |
| usleep_range(2000, 3000); | |
| return ret; | |
| } | |
| static void wm831x_fll_unprepare(struct clk_hw *hw) | |
| { | |
| struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, | |
| fll_hw); | |
| struct wm831x *wm831x = clkdata->wm831x; | |
| int ret; | |
| ret = wm831x_set_bits(wm831x, WM831X_FLL_CONTROL_1, WM831X_FLL_ENA, 0); | |
| if (ret != 0) | |
| dev_crit(wm831x->dev, "Failed to disable FLL: %d\n", ret); | |
| } | |
| static unsigned long wm831x_fll_recalc_rate(struct clk_hw *hw, | |
| unsigned long parent_rate) | |
| { | |
| struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, | |
| fll_hw); | |
| struct wm831x *wm831x = clkdata->wm831x; | |
| int ret; | |
| ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2); | |
| if (ret < 0) { | |
| dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_2: %d\n", | |
| ret); | |
| return 0; | |
| } | |
| if (ret & WM831X_FLL_AUTO) | |
| return wm831x_fll_auto_rates[ret & WM831X_FLL_AUTO_FREQ_MASK]; | |
| dev_err(wm831x->dev, "FLL only supported in AUTO mode\n"); | |
| return 0; | |
| } | |
| static int wm831x_fll_determine_rate(struct clk_hw *hw, | |
| struct clk_rate_request *req) | |
| { | |
| int best = 0; | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(wm831x_fll_auto_rates); i++) | |
| if (abs(wm831x_fll_auto_rates[i] - req->rate) < | |
| abs(wm831x_fll_auto_rates[best] - req->rate)) | |
| best = i; | |
| req->rate = wm831x_fll_auto_rates[best]; | |
| return 0; | |
| } | |
| static int wm831x_fll_set_rate(struct clk_hw *hw, unsigned long rate, | |
| unsigned long parent_rate) | |
| { | |
| struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, | |
| fll_hw); | |
| struct wm831x *wm831x = clkdata->wm831x; | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(wm831x_fll_auto_rates); i++) | |
| if (wm831x_fll_auto_rates[i] == rate) | |
| break; | |
| if (i == ARRAY_SIZE(wm831x_fll_auto_rates)) | |
| return -EINVAL; | |
| if (wm831x_fll_is_prepared(hw)) | |
| return -EPERM; | |
| return wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_2, | |
| WM831X_FLL_AUTO_FREQ_MASK, i); | |
| } | |
| static const char *wm831x_fll_parents[] = { | |
| "xtal", | |
| "clkin", | |
| }; | |
| static u8 wm831x_fll_get_parent(struct clk_hw *hw) | |
| { | |
| struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, | |
| fll_hw); | |
| struct wm831x *wm831x = clkdata->wm831x; | |
| int ret; | |
| /* AUTO mode is always clocked from the crystal */ | |
| ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2); | |
| if (ret < 0) { | |
| dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_2: %d\n", | |
| ret); | |
| return 0; | |
| } | |
| if (ret & WM831X_FLL_AUTO) | |
| return 0; | |
| ret = wm831x_reg_read(wm831x, WM831X_FLL_CONTROL_5); | |
| if (ret < 0) { | |
| dev_err(wm831x->dev, "Unable to read FLL_CONTROL_5: %d\n", | |
| ret); | |
| return 0; | |
| } | |
| switch (ret & WM831X_FLL_CLK_SRC_MASK) { | |
| case 0: | |
| return 0; | |
| case 1: | |
| return 1; | |
| default: | |
| dev_err(wm831x->dev, "Unsupported FLL clock source %d\n", | |
| ret & WM831X_FLL_CLK_SRC_MASK); | |
| return 0; | |
| } | |
| } | |
| static const struct clk_ops wm831x_fll_ops = { | |
| .is_prepared = wm831x_fll_is_prepared, | |
| .prepare = wm831x_fll_prepare, | |
| .unprepare = wm831x_fll_unprepare, | |
| .determine_rate = wm831x_fll_determine_rate, | |
| .recalc_rate = wm831x_fll_recalc_rate, | |
| .set_rate = wm831x_fll_set_rate, | |
| .get_parent = wm831x_fll_get_parent, | |
| }; | |
| static const struct clk_init_data wm831x_fll_init = { | |
| .name = "fll", | |
| .ops = &wm831x_fll_ops, | |
| .parent_names = wm831x_fll_parents, | |
| .num_parents = ARRAY_SIZE(wm831x_fll_parents), | |
| .flags = CLK_SET_RATE_GATE, | |
| }; | |
| static int wm831x_clkout_is_prepared(struct clk_hw *hw) | |
| { | |
| struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, | |
| clkout_hw); | |
| struct wm831x *wm831x = clkdata->wm831x; | |
| int ret; | |
| ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_1); | |
| if (ret < 0) { | |
| dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_1: %d\n", | |
| ret); | |
| return false; | |
| } | |
| return (ret & WM831X_CLKOUT_ENA) != 0; | |
| } | |
| static int wm831x_clkout_prepare(struct clk_hw *hw) | |
| { | |
| struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, | |
| clkout_hw); | |
| struct wm831x *wm831x = clkdata->wm831x; | |
| int ret; | |
| ret = wm831x_reg_unlock(wm831x); | |
| if (ret != 0) { | |
| dev_crit(wm831x->dev, "Failed to lock registers: %d\n", ret); | |
| return ret; | |
| } | |
| ret = wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_1, | |
| WM831X_CLKOUT_ENA, WM831X_CLKOUT_ENA); | |
| if (ret != 0) | |
| dev_crit(wm831x->dev, "Failed to enable CLKOUT: %d\n", ret); | |
| wm831x_reg_lock(wm831x); | |
| return ret; | |
| } | |
| static void wm831x_clkout_unprepare(struct clk_hw *hw) | |
| { | |
| struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, | |
| clkout_hw); | |
| struct wm831x *wm831x = clkdata->wm831x; | |
| int ret; | |
| ret = wm831x_reg_unlock(wm831x); | |
| if (ret != 0) { | |
| dev_crit(wm831x->dev, "Failed to lock registers: %d\n", ret); | |
| return; | |
| } | |
| ret = wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_1, | |
| WM831X_CLKOUT_ENA, 0); | |
| if (ret != 0) | |
| dev_crit(wm831x->dev, "Failed to disable CLKOUT: %d\n", ret); | |
| wm831x_reg_lock(wm831x); | |
| } | |
| static const char *wm831x_clkout_parents[] = { | |
| "fll", | |
| "xtal", | |
| }; | |
| static u8 wm831x_clkout_get_parent(struct clk_hw *hw) | |
| { | |
| struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, | |
| clkout_hw); | |
| struct wm831x *wm831x = clkdata->wm831x; | |
| int ret; | |
| ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_1); | |
| if (ret < 0) { | |
| dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_1: %d\n", | |
| ret); | |
| return 0; | |
| } | |
| if (ret & WM831X_CLKOUT_SRC) | |
| return 1; | |
| else | |
| return 0; | |
| } | |
| static int wm831x_clkout_set_parent(struct clk_hw *hw, u8 parent) | |
| { | |
| struct wm831x_clk *clkdata = container_of(hw, struct wm831x_clk, | |
| clkout_hw); | |
| struct wm831x *wm831x = clkdata->wm831x; | |
| return wm831x_set_bits(wm831x, WM831X_CLOCK_CONTROL_1, | |
| WM831X_CLKOUT_SRC, | |
| parent << WM831X_CLKOUT_SRC_SHIFT); | |
| } | |
| static const struct clk_ops wm831x_clkout_ops = { | |
| .is_prepared = wm831x_clkout_is_prepared, | |
| .prepare = wm831x_clkout_prepare, | |
| .unprepare = wm831x_clkout_unprepare, | |
| .determine_rate = clk_hw_determine_rate_no_reparent, | |
| .get_parent = wm831x_clkout_get_parent, | |
| .set_parent = wm831x_clkout_set_parent, | |
| }; | |
| static const struct clk_init_data wm831x_clkout_init = { | |
| .name = "clkout", | |
| .ops = &wm831x_clkout_ops, | |
| .parent_names = wm831x_clkout_parents, | |
| .num_parents = ARRAY_SIZE(wm831x_clkout_parents), | |
| .flags = CLK_SET_RATE_PARENT, | |
| }; | |
| static int wm831x_clk_probe(struct platform_device *pdev) | |
| { | |
| struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); | |
| struct wm831x_clk *clkdata; | |
| int ret; | |
| clkdata = devm_kzalloc(&pdev->dev, sizeof(*clkdata), GFP_KERNEL); | |
| if (!clkdata) | |
| return -ENOMEM; | |
| clkdata->wm831x = wm831x; | |
| /* XTAL_ENA can only be set via OTP/InstantConfig so just read once */ | |
| ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2); | |
| if (ret < 0) { | |
| dev_err(wm831x->dev, "Unable to read CLOCK_CONTROL_2: %d\n", | |
| ret); | |
| return ret; | |
| } | |
| clkdata->xtal_ena = ret & WM831X_XTAL_ENA; | |
| clkdata->xtal_hw.init = &wm831x_xtal_init; | |
| ret = devm_clk_hw_register(&pdev->dev, &clkdata->xtal_hw); | |
| if (ret) | |
| return ret; | |
| clkdata->fll_hw.init = &wm831x_fll_init; | |
| ret = devm_clk_hw_register(&pdev->dev, &clkdata->fll_hw); | |
| if (ret) | |
| return ret; | |
| clkdata->clkout_hw.init = &wm831x_clkout_init; | |
| ret = devm_clk_hw_register(&pdev->dev, &clkdata->clkout_hw); | |
| if (ret) | |
| return ret; | |
| platform_set_drvdata(pdev, clkdata); | |
| return 0; | |
| } | |
| static struct platform_driver wm831x_clk_driver = { | |
| .probe = wm831x_clk_probe, | |
| .driver = { | |
| .name = "wm831x-clk", | |
| }, | |
| }; | |
| module_platform_driver(wm831x_clk_driver); | |
| /* Module information */ | |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); | |
| MODULE_DESCRIPTION("WM831x clock driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("platform:wm831x-clk"); |