| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright (c) 2018, The Linux Foundation. All rights reserved. | |
| */ | |
| /* | |
| * In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors, | |
| * the CPU frequency subset and voltage value of each OPP varies | |
| * based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables | |
| * defines the voltage and frequency value based on the msm-id in SMEM | |
| * and speedbin blown in the efuse combination. | |
| * The qcom-cpufreq-nvmem driver reads the msm-id and efuse value from the SoC | |
| * to provide the OPP framework with required information. | |
| * This is used to determine the voltage and frequency value for each OPP of | |
| * operating-points-v2 table when it is parsed by the OPP framework. | |
| */ | |
| #include <linux/cpu.h> | |
| #include <linux/err.h> | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/nvmem-consumer.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/pm.h> | |
| #include <linux/pm_domain.h> | |
| #include <linux/pm_opp.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/slab.h> | |
| #include <linux/soc/qcom/smem.h> | |
| #include <dt-bindings/arm/qcom,ids.h> | |
| enum ipq806x_versions { | |
| IPQ8062_VERSION = 0, | |
| IPQ8064_VERSION, | |
| IPQ8065_VERSION, | |
| }; | |
| #define IPQ6000_VERSION BIT(2) | |
| enum ipq8074_versions { | |
| IPQ8074_HAWKEYE_VERSION = 0, | |
| IPQ8074_ACORN_VERSION, | |
| }; | |
| struct qcom_cpufreq_drv; | |
| struct qcom_cpufreq_match_data { | |
| int (*get_version)(struct device *cpu_dev, | |
| struct nvmem_cell *speedbin_nvmem, | |
| char **pvs_name, | |
| struct qcom_cpufreq_drv *drv); | |
| const char **pd_names; | |
| unsigned int num_pd_names; | |
| }; | |
| struct qcom_cpufreq_drv_cpu { | |
| int opp_token; | |
| struct dev_pm_domain_list *pd_list; | |
| }; | |
| struct qcom_cpufreq_drv { | |
| u32 versions; | |
| const struct qcom_cpufreq_match_data *data; | |
| struct qcom_cpufreq_drv_cpu cpus[]; | |
| }; | |
| static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev; | |
| static int qcom_cpufreq_simple_get_version(struct device *cpu_dev, | |
| struct nvmem_cell *speedbin_nvmem, | |
| char **pvs_name, | |
| struct qcom_cpufreq_drv *drv) | |
| { | |
| u8 *speedbin; | |
| *pvs_name = NULL; | |
| speedbin = nvmem_cell_read(speedbin_nvmem, NULL); | |
| if (IS_ERR(speedbin)) | |
| return PTR_ERR(speedbin); | |
| dev_dbg(cpu_dev, "speedbin: %d\n", *speedbin); | |
| drv->versions = 1 << *speedbin; | |
| kfree(speedbin); | |
| return 0; | |
| } | |
| static void get_krait_bin_format_a(struct device *cpu_dev, | |
| int *speed, int *pvs, | |
| u8 *buf) | |
| { | |
| u32 pte_efuse; | |
| pte_efuse = *((u32 *)buf); | |
| *speed = pte_efuse & 0xf; | |
| if (*speed == 0xf) | |
| *speed = (pte_efuse >> 4) & 0xf; | |
| if (*speed == 0xf) { | |
| *speed = 0; | |
| dev_warn(cpu_dev, "Speed bin: Defaulting to %d\n", *speed); | |
| } else { | |
| dev_dbg(cpu_dev, "Speed bin: %d\n", *speed); | |
| } | |
| *pvs = (pte_efuse >> 10) & 0x7; | |
| if (*pvs == 0x7) | |
| *pvs = (pte_efuse >> 13) & 0x7; | |
| if (*pvs == 0x7) { | |
| *pvs = 0; | |
| dev_warn(cpu_dev, "PVS bin: Defaulting to %d\n", *pvs); | |
| } else { | |
| dev_dbg(cpu_dev, "PVS bin: %d\n", *pvs); | |
| } | |
| } | |
| static void get_krait_bin_format_b(struct device *cpu_dev, | |
| int *speed, int *pvs, int *pvs_ver, | |
| u8 *buf) | |
| { | |
| u32 pte_efuse, redundant_sel; | |
| pte_efuse = *((u32 *)buf); | |
| redundant_sel = (pte_efuse >> 24) & 0x7; | |
| *pvs_ver = (pte_efuse >> 4) & 0x3; | |
| switch (redundant_sel) { | |
| case 1: | |
| *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7); | |
| *speed = (pte_efuse >> 27) & 0xf; | |
| break; | |
| case 2: | |
| *pvs = (pte_efuse >> 27) & 0xf; | |
| *speed = pte_efuse & 0x7; | |
| break; | |
| default: | |
| /* 4 bits of PVS are in efuse register bits 31, 8-6. */ | |
| *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7); | |
| *speed = pte_efuse & 0x7; | |
| } | |
| /* Check SPEED_BIN_BLOW_STATUS */ | |
| if (pte_efuse & BIT(3)) { | |
| dev_dbg(cpu_dev, "Speed bin: %d\n", *speed); | |
| } else { | |
| dev_warn(cpu_dev, "Speed bin not set. Defaulting to 0!\n"); | |
| *speed = 0; | |
| } | |
| /* Check PVS_BLOW_STATUS */ | |
| pte_efuse = *(((u32 *)buf) + 1); | |
| pte_efuse &= BIT(21); | |
| if (pte_efuse) { | |
| dev_dbg(cpu_dev, "PVS bin: %d\n", *pvs); | |
| } else { | |
| dev_warn(cpu_dev, "PVS bin not set. Defaulting to 0!\n"); | |
| *pvs = 0; | |
| } | |
| dev_dbg(cpu_dev, "PVS version: %d\n", *pvs_ver); | |
| } | |
| static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev, | |
| struct nvmem_cell *speedbin_nvmem, | |
| char **pvs_name, | |
| struct qcom_cpufreq_drv *drv) | |
| { | |
| size_t len; | |
| u32 msm_id; | |
| u8 *speedbin; | |
| int ret; | |
| *pvs_name = NULL; | |
| ret = qcom_smem_get_soc_id(&msm_id); | |
| if (ret) | |
| return ret; | |
| speedbin = nvmem_cell_read(speedbin_nvmem, &len); | |
| if (IS_ERR(speedbin)) | |
| return PTR_ERR(speedbin); | |
| switch (msm_id) { | |
| case QCOM_ID_MSM8996: | |
| case QCOM_ID_APQ8096: | |
| case QCOM_ID_IPQ5332: | |
| case QCOM_ID_IPQ5322: | |
| case QCOM_ID_IPQ5312: | |
| case QCOM_ID_IPQ5302: | |
| case QCOM_ID_IPQ5300: | |
| case QCOM_ID_IPQ5321: | |
| case QCOM_ID_IPQ9514: | |
| case QCOM_ID_IPQ9550: | |
| case QCOM_ID_IPQ9554: | |
| case QCOM_ID_IPQ9570: | |
| case QCOM_ID_IPQ9574: | |
| drv->versions = 1 << (unsigned int)(*speedbin); | |
| break; | |
| case QCOM_ID_IPQ5200: | |
| case QCOM_ID_IPQ5210: | |
| case QCOM_ID_QCF2200: | |
| case QCOM_ID_QCF3200: | |
| case QCOM_ID_QCF3210: | |
| drv->versions = (*speedbin == 0xcd) ? BIT(1) : BIT(0); | |
| break; | |
| case QCOM_ID_IPQ5424: | |
| case QCOM_ID_IPQ5404: | |
| drv->versions = (*speedbin == 0x3b) ? BIT(1) : BIT(0); | |
| break; | |
| case QCOM_ID_MSM8996SG: | |
| case QCOM_ID_APQ8096SG: | |
| drv->versions = 1 << ((unsigned int)(*speedbin) + 4); | |
| break; | |
| default: | |
| BUG(); | |
| break; | |
| } | |
| kfree(speedbin); | |
| return 0; | |
| } | |
| static int qcom_cpufreq_krait_name_version(struct device *cpu_dev, | |
| struct nvmem_cell *speedbin_nvmem, | |
| char **pvs_name, | |
| struct qcom_cpufreq_drv *drv) | |
| { | |
| int speed = 0, pvs = 0, pvs_ver = 0; | |
| u8 *speedbin; | |
| size_t len; | |
| int ret = 0; | |
| speedbin = nvmem_cell_read(speedbin_nvmem, &len); | |
| if (IS_ERR(speedbin)) | |
| return PTR_ERR(speedbin); | |
| switch (len) { | |
| case 4: | |
| get_krait_bin_format_a(cpu_dev, &speed, &pvs, speedbin); | |
| break; | |
| case 8: | |
| get_krait_bin_format_b(cpu_dev, &speed, &pvs, &pvs_ver, | |
| speedbin); | |
| break; | |
| default: | |
| dev_err(cpu_dev, "Unable to read nvmem data. Defaulting to 0!\n"); | |
| ret = -ENODEV; | |
| goto len_error; | |
| } | |
| snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d", | |
| speed, pvs, pvs_ver); | |
| drv->versions = (1 << speed); | |
| len_error: | |
| kfree(speedbin); | |
| return ret; | |
| } | |
| static const struct of_device_id qcom_cpufreq_ipq806x_match_list[] __maybe_unused = { | |
| { .compatible = "qcom,ipq8062", .data = (const void *)QCOM_ID_IPQ8062 }, | |
| { .compatible = "qcom,ipq8064", .data = (const void *)QCOM_ID_IPQ8064 }, | |
| { .compatible = "qcom,ipq8065", .data = (const void *)QCOM_ID_IPQ8065 }, | |
| { .compatible = "qcom,ipq8066", .data = (const void *)QCOM_ID_IPQ8066 }, | |
| { .compatible = "qcom,ipq8068", .data = (const void *)QCOM_ID_IPQ8068 }, | |
| { .compatible = "qcom,ipq8069", .data = (const void *)QCOM_ID_IPQ8069 }, | |
| { /* sentinel */ } | |
| }; | |
| static int qcom_cpufreq_ipq8064_name_version(struct device *cpu_dev, | |
| struct nvmem_cell *speedbin_nvmem, | |
| char **pvs_name, | |
| struct qcom_cpufreq_drv *drv) | |
| { | |
| int msm_id = -1, ret = 0; | |
| int speed = 0, pvs = 0; | |
| u8 *speedbin; | |
| size_t len; | |
| speedbin = nvmem_cell_read(speedbin_nvmem, &len); | |
| if (IS_ERR(speedbin)) | |
| return PTR_ERR(speedbin); | |
| if (len != 4) { | |
| dev_err(cpu_dev, "Unable to read nvmem data. Defaulting to 0!\n"); | |
| ret = -ENODEV; | |
| goto exit; | |
| } | |
| get_krait_bin_format_a(cpu_dev, &speed, &pvs, speedbin); | |
| ret = qcom_smem_get_soc_id(&msm_id); | |
| if (ret == -ENODEV) { | |
| const struct of_device_id *match; | |
| /* Fallback to compatible match with no SMEM initialized */ | |
| match = of_machine_get_match(qcom_cpufreq_ipq806x_match_list); | |
| if (!match) { | |
| ret = -ENODEV; | |
| goto exit; | |
| } | |
| /* We found a matching device, get the msm_id from the data entry */ | |
| msm_id = (int)(uintptr_t)match->data; | |
| ret = 0; | |
| } else if (ret) { | |
| goto exit; | |
| } | |
| switch (msm_id) { | |
| case QCOM_ID_IPQ8062: | |
| drv->versions = BIT(IPQ8062_VERSION); | |
| break; | |
| case QCOM_ID_IPQ8064: | |
| case QCOM_ID_IPQ8066: | |
| case QCOM_ID_IPQ8068: | |
| drv->versions = BIT(IPQ8064_VERSION); | |
| break; | |
| case QCOM_ID_IPQ8065: | |
| case QCOM_ID_IPQ8069: | |
| drv->versions = BIT(IPQ8065_VERSION); | |
| break; | |
| default: | |
| dev_err(cpu_dev, | |
| "SoC ID %u is not part of IPQ8064 family, limiting to 1.0GHz!\n", | |
| msm_id); | |
| drv->versions = BIT(IPQ8062_VERSION); | |
| break; | |
| } | |
| /* IPQ8064 speed is never fused. Only pvs values are fused. */ | |
| snprintf(*pvs_name, sizeof("speed0-pvsXX"), "speed0-pvs%d", pvs); | |
| exit: | |
| kfree(speedbin); | |
| return ret; | |
| } | |
| static int qcom_cpufreq_ipq6018_name_version(struct device *cpu_dev, | |
| struct nvmem_cell *speedbin_nvmem, | |
| char **pvs_name, | |
| struct qcom_cpufreq_drv *drv) | |
| { | |
| u32 msm_id; | |
| int ret; | |
| u8 *speedbin; | |
| *pvs_name = NULL; | |
| ret = qcom_smem_get_soc_id(&msm_id); | |
| if (ret) | |
| return ret; | |
| speedbin = nvmem_cell_read(speedbin_nvmem, NULL); | |
| if (IS_ERR(speedbin)) | |
| return PTR_ERR(speedbin); | |
| switch (msm_id) { | |
| case QCOM_ID_IPQ6005: | |
| case QCOM_ID_IPQ6010: | |
| case QCOM_ID_IPQ6018: | |
| case QCOM_ID_IPQ6028: | |
| /* Fuse Value Freq BIT to set | |
| * --------------------------------- | |
| * 2’b0 No Limit BIT(0) | |
| * 2’b1 1.5 GHz BIT(1) | |
| */ | |
| drv->versions = 1 << (unsigned int)(*speedbin); | |
| break; | |
| case QCOM_ID_IPQ6000: | |
| /* | |
| * IPQ6018 family only has one bit to advertise the CPU | |
| * speed-bin, but that is not enough for IPQ6000 which | |
| * is only rated up to 1.2GHz. | |
| * So for IPQ6000 manually set BIT(2) based on SMEM ID. | |
| */ | |
| drv->versions = IPQ6000_VERSION; | |
| break; | |
| default: | |
| dev_err(cpu_dev, | |
| "SoC ID %u is not part of IPQ6018 family, limiting to 1.2GHz!\n", | |
| msm_id); | |
| drv->versions = IPQ6000_VERSION; | |
| break; | |
| } | |
| kfree(speedbin); | |
| return 0; | |
| } | |
| static int qcom_cpufreq_ipq8074_name_version(struct device *cpu_dev, | |
| struct nvmem_cell *speedbin_nvmem, | |
| char **pvs_name, | |
| struct qcom_cpufreq_drv *drv) | |
| { | |
| u32 msm_id; | |
| int ret; | |
| *pvs_name = NULL; | |
| ret = qcom_smem_get_soc_id(&msm_id); | |
| if (ret) | |
| return ret; | |
| switch (msm_id) { | |
| case QCOM_ID_IPQ8070A: | |
| case QCOM_ID_IPQ8071A: | |
| case QCOM_ID_IPQ8172: | |
| case QCOM_ID_IPQ8173: | |
| case QCOM_ID_IPQ8174: | |
| drv->versions = BIT(IPQ8074_ACORN_VERSION); | |
| break; | |
| case QCOM_ID_IPQ8072A: | |
| case QCOM_ID_IPQ8074A: | |
| case QCOM_ID_IPQ8076A: | |
| case QCOM_ID_IPQ8078A: | |
| drv->versions = BIT(IPQ8074_HAWKEYE_VERSION); | |
| break; | |
| default: | |
| dev_err(cpu_dev, | |
| "SoC ID %u is not part of IPQ8074 family, limiting to 1.4GHz!\n", | |
| msm_id); | |
| drv->versions = BIT(IPQ8074_ACORN_VERSION); | |
| break; | |
| } | |
| return 0; | |
| } | |
| static const struct qcom_cpufreq_match_data match_data_kryo = { | |
| .get_version = qcom_cpufreq_kryo_name_version, | |
| }; | |
| static const struct qcom_cpufreq_match_data match_data_krait = { | |
| .get_version = qcom_cpufreq_krait_name_version, | |
| }; | |
| static const struct qcom_cpufreq_match_data match_data_msm8909 = { | |
| .get_version = qcom_cpufreq_simple_get_version, | |
| .pd_names = (const char *[]) { "perf" }, | |
| .num_pd_names = 1, | |
| }; | |
| static const struct qcom_cpufreq_match_data match_data_qcs404 = { | |
| .pd_names = (const char *[]) { "cpr" }, | |
| .num_pd_names = 1, | |
| }; | |
| static const struct qcom_cpufreq_match_data match_data_ipq6018 = { | |
| .get_version = qcom_cpufreq_ipq6018_name_version, | |
| }; | |
| static const struct qcom_cpufreq_match_data match_data_ipq8064 = { | |
| .get_version = qcom_cpufreq_ipq8064_name_version, | |
| }; | |
| static const struct qcom_cpufreq_match_data match_data_ipq8074 = { | |
| .get_version = qcom_cpufreq_ipq8074_name_version, | |
| }; | |
| static void qcom_cpufreq_suspend_pd_devs(struct qcom_cpufreq_drv *drv, unsigned int cpu) | |
| { | |
| struct dev_pm_domain_list *pd_list = drv->cpus[cpu].pd_list; | |
| int i; | |
| if (!pd_list) | |
| return; | |
| for (i = 0; i < pd_list->num_pds; i++) | |
| device_set_awake_path(pd_list->pd_devs[i]); | |
| } | |
| static int qcom_cpufreq_probe(struct platform_device *pdev) | |
| { | |
| struct qcom_cpufreq_drv *drv; | |
| struct nvmem_cell *speedbin_nvmem; | |
| struct device *cpu_dev; | |
| char pvs_name_buffer[] = "speedXX-pvsXX-vXX"; | |
| char *pvs_name = pvs_name_buffer; | |
| unsigned cpu; | |
| const struct of_device_id *match; | |
| int ret; | |
| cpu_dev = get_cpu_device(0); | |
| if (!cpu_dev) | |
| return -ENODEV; | |
| struct device_node *np __free(device_node) = | |
| dev_pm_opp_of_get_opp_desc_node(cpu_dev); | |
| if (!np) | |
| return -ENOENT; | |
| ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu") || | |
| of_device_is_compatible(np, "operating-points-v2-krait-cpu"); | |
| if (!ret) | |
| return -ENOENT; | |
| drv = devm_kzalloc(&pdev->dev, struct_size(drv, cpus, num_possible_cpus()), | |
| GFP_KERNEL); | |
| if (!drv) | |
| return -ENOMEM; | |
| match = pdev->dev.platform_data; | |
| drv->data = match->data; | |
| if (!drv->data) | |
| return -ENODEV; | |
| if (drv->data->get_version) { | |
| speedbin_nvmem = of_nvmem_cell_get(np, NULL); | |
| if (IS_ERR(speedbin_nvmem)) | |
| return dev_err_probe(cpu_dev, PTR_ERR(speedbin_nvmem), | |
| "Could not get nvmem cell\n"); | |
| ret = drv->data->get_version(cpu_dev, | |
| speedbin_nvmem, &pvs_name, drv); | |
| if (ret) { | |
| nvmem_cell_put(speedbin_nvmem); | |
| return ret; | |
| } | |
| nvmem_cell_put(speedbin_nvmem); | |
| } | |
| for_each_present_cpu(cpu) { | |
| struct dev_pm_opp_config config = { | |
| .supported_hw = NULL, | |
| }; | |
| cpu_dev = get_cpu_device(cpu); | |
| if (NULL == cpu_dev) { | |
| ret = -ENODEV; | |
| goto free_opp; | |
| } | |
| if (drv->data->get_version) { | |
| config.supported_hw = &drv->versions; | |
| config.supported_hw_count = 1; | |
| if (pvs_name) | |
| config.prop_name = pvs_name; | |
| } | |
| if (config.supported_hw) { | |
| drv->cpus[cpu].opp_token = dev_pm_opp_set_config(cpu_dev, &config); | |
| if (drv->cpus[cpu].opp_token < 0) { | |
| ret = drv->cpus[cpu].opp_token; | |
| dev_err(cpu_dev, "Failed to set OPP config\n"); | |
| goto free_opp; | |
| } | |
| } | |
| if (drv->data->pd_names) { | |
| struct dev_pm_domain_attach_data attach_data = { | |
| .pd_names = drv->data->pd_names, | |
| .num_pd_names = drv->data->num_pd_names, | |
| .pd_flags = PD_FLAG_DEV_LINK_ON | | |
| PD_FLAG_REQUIRED_OPP, | |
| }; | |
| ret = dev_pm_domain_attach_list(cpu_dev, &attach_data, | |
| &drv->cpus[cpu].pd_list); | |
| if (ret < 0) | |
| goto free_opp; | |
| } | |
| } | |
| cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1, | |
| NULL, 0); | |
| if (!IS_ERR(cpufreq_dt_pdev)) { | |
| platform_set_drvdata(pdev, drv); | |
| return 0; | |
| } | |
| ret = PTR_ERR(cpufreq_dt_pdev); | |
| dev_err(cpu_dev, "Failed to register platform device\n"); | |
| free_opp: | |
| for_each_present_cpu(cpu) { | |
| dev_pm_domain_detach_list(drv->cpus[cpu].pd_list); | |
| dev_pm_opp_clear_config(drv->cpus[cpu].opp_token); | |
| } | |
| return ret; | |
| } | |
| static void qcom_cpufreq_remove(struct platform_device *pdev) | |
| { | |
| struct qcom_cpufreq_drv *drv = platform_get_drvdata(pdev); | |
| unsigned int cpu; | |
| platform_device_unregister(cpufreq_dt_pdev); | |
| for_each_present_cpu(cpu) { | |
| dev_pm_domain_detach_list(drv->cpus[cpu].pd_list); | |
| dev_pm_opp_clear_config(drv->cpus[cpu].opp_token); | |
| } | |
| } | |
| static int qcom_cpufreq_suspend(struct device *dev) | |
| { | |
| struct qcom_cpufreq_drv *drv = dev_get_drvdata(dev); | |
| unsigned int cpu; | |
| for_each_present_cpu(cpu) | |
| qcom_cpufreq_suspend_pd_devs(drv, cpu); | |
| return 0; | |
| } | |
| static DEFINE_SIMPLE_DEV_PM_OPS(qcom_cpufreq_pm_ops, qcom_cpufreq_suspend, NULL); | |
| static struct platform_driver qcom_cpufreq_driver = { | |
| .probe = qcom_cpufreq_probe, | |
| .remove = qcom_cpufreq_remove, | |
| .driver = { | |
| .name = "qcom-cpufreq-nvmem", | |
| .pm = pm_sleep_ptr(&qcom_cpufreq_pm_ops), | |
| }, | |
| }; | |
| static const struct of_device_id qcom_cpufreq_match_list[] __initconst __maybe_unused = { | |
| { .compatible = "qcom,apq8096", .data = &match_data_kryo }, | |
| { .compatible = "qcom,msm8909", .data = &match_data_msm8909 }, | |
| { .compatible = "qcom,msm8996", .data = &match_data_kryo }, | |
| { .compatible = "qcom,qcs404", .data = &match_data_qcs404 }, | |
| { .compatible = "qcom,ipq5210", .data = &match_data_kryo }, | |
| { .compatible = "qcom,ipq5332", .data = &match_data_kryo }, | |
| { .compatible = "qcom,ipq5424", .data = &match_data_kryo }, | |
| { .compatible = "qcom,ipq6018", .data = &match_data_ipq6018 }, | |
| { .compatible = "qcom,ipq8064", .data = &match_data_ipq8064 }, | |
| { .compatible = "qcom,ipq8074", .data = &match_data_ipq8074 }, | |
| { .compatible = "qcom,apq8064", .data = &match_data_krait }, | |
| { .compatible = "qcom,ipq9574", .data = &match_data_kryo }, | |
| { .compatible = "qcom,msm8974", .data = &match_data_krait }, | |
| { .compatible = "qcom,msm8960", .data = &match_data_krait }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, qcom_cpufreq_match_list); | |
| /* | |
| * Since the driver depends on smem and nvmem drivers, which may | |
| * return EPROBE_DEFER, all the real activity is done in the probe, | |
| * which may be defered as well. The init here is only registering | |
| * the driver and the platform device. | |
| */ | |
| static int __init qcom_cpufreq_init(void) | |
| { | |
| const struct of_device_id *match; | |
| int ret; | |
| match = of_machine_get_match(qcom_cpufreq_match_list); | |
| if (!match) | |
| return -ENODEV; | |
| ret = platform_driver_register(&qcom_cpufreq_driver); | |
| if (unlikely(ret < 0)) | |
| return ret; | |
| cpufreq_pdev = platform_device_register_data(NULL, "qcom-cpufreq-nvmem", | |
| -1, match, sizeof(*match)); | |
| ret = PTR_ERR_OR_ZERO(cpufreq_pdev); | |
| if (0 == ret) | |
| return 0; | |
| platform_driver_unregister(&qcom_cpufreq_driver); | |
| return ret; | |
| } | |
| module_init(qcom_cpufreq_init); | |
| static void __exit qcom_cpufreq_exit(void) | |
| { | |
| platform_device_unregister(cpufreq_pdev); | |
| platform_driver_unregister(&qcom_cpufreq_driver); | |
| } | |
| module_exit(qcom_cpufreq_exit); | |
| MODULE_DESCRIPTION("Qualcomm Technologies, Inc. CPUfreq driver"); | |
| MODULE_LICENSE("GPL v2"); |