| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * isl29020.c - Intersil ALS Driver | |
| * | |
| * Copyright (C) 2008 Intel Corp | |
| * | |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | |
| * | |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | |
| * | |
| * Data sheet at: http://www.intersil.com/data/fn/fn6505.pdf | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/i2c.h> | |
| #include <linux/err.h> | |
| #include <linux/delay.h> | |
| #include <linux/sysfs.h> | |
| #include <linux/pm_runtime.h> | |
| static DEFINE_MUTEX(mutex); | |
| static ssize_t als_sensing_range_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| int val; | |
| val = i2c_smbus_read_byte_data(client, 0x00); | |
| if (val < 0) | |
| return val; | |
| return sprintf(buf, "%d000\n", 1 << (2 * (val & 3))); | |
| } | |
| static ssize_t als_lux_input_data_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| int ret_val, val; | |
| unsigned long int lux; | |
| int temp; | |
| pm_runtime_get_sync(dev); | |
| msleep(100); | |
| mutex_lock(&mutex); | |
| temp = i2c_smbus_read_byte_data(client, 0x02); /* MSB data */ | |
| if (temp < 0) { | |
| pm_runtime_put_sync(dev); | |
| mutex_unlock(&mutex); | |
| return temp; | |
| } | |
| ret_val = i2c_smbus_read_byte_data(client, 0x01); /* LSB data */ | |
| mutex_unlock(&mutex); | |
| if (ret_val < 0) { | |
| pm_runtime_put_sync(dev); | |
| return ret_val; | |
| } | |
| ret_val |= temp << 8; | |
| val = i2c_smbus_read_byte_data(client, 0x00); | |
| pm_runtime_put_sync(dev); | |
| if (val < 0) | |
| return val; | |
| lux = ((((1 << (2 * (val & 3))))*1000) * ret_val) / 65536; | |
| return sprintf(buf, "%lu\n", lux); | |
| } | |
| static ssize_t als_sensing_range_store(struct device *dev, | |
| struct device_attribute *attr, const char *buf, size_t count) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| int ret_val; | |
| unsigned long val; | |
| ret_val = kstrtoul(buf, 10, &val); | |
| if (ret_val) | |
| return ret_val; | |
| if (val < 1 || val > 64000) | |
| return -EINVAL; | |
| /* Pick the smallest sensor range that will meet our requirements */ | |
| if (val <= 1000) | |
| val = 1; | |
| else if (val <= 4000) | |
| val = 2; | |
| else if (val <= 16000) | |
| val = 3; | |
| else | |
| val = 4; | |
| ret_val = i2c_smbus_read_byte_data(client, 0x00); | |
| if (ret_val < 0) | |
| return ret_val; | |
| ret_val &= 0xFC; /*reset the bit before setting them */ | |
| ret_val |= val - 1; | |
| ret_val = i2c_smbus_write_byte_data(client, 0x00, ret_val); | |
| if (ret_val < 0) | |
| return ret_val; | |
| return count; | |
| } | |
| static void als_set_power_state(struct i2c_client *client, int enable) | |
| { | |
| int ret_val; | |
| ret_val = i2c_smbus_read_byte_data(client, 0x00); | |
| if (ret_val < 0) | |
| return; | |
| if (enable) | |
| ret_val |= 0x80; | |
| else | |
| ret_val &= 0x7F; | |
| i2c_smbus_write_byte_data(client, 0x00, ret_val); | |
| } | |
| static DEVICE_ATTR(lux0_sensor_range, S_IRUGO | S_IWUSR, | |
| als_sensing_range_show, als_sensing_range_store); | |
| static DEVICE_ATTR(lux0_input, S_IRUGO, als_lux_input_data_show, NULL); | |
| static struct attribute *mid_att_als[] = { | |
| &dev_attr_lux0_sensor_range.attr, | |
| &dev_attr_lux0_input.attr, | |
| NULL | |
| }; | |
| static const struct attribute_group m_als_gr = { | |
| .name = "isl29020", | |
| .attrs = mid_att_als | |
| }; | |
| static int als_set_default_config(struct i2c_client *client) | |
| { | |
| int retval; | |
| retval = i2c_smbus_write_byte_data(client, 0x00, 0xc0); | |
| if (retval < 0) { | |
| dev_err(&client->dev, "default write failed."); | |
| return retval; | |
| } | |
| return 0; | |
| } | |
| static int isl29020_probe(struct i2c_client *client) | |
| { | |
| int res; | |
| res = als_set_default_config(client); | |
| if (res < 0) | |
| return res; | |
| res = sysfs_create_group(&client->dev.kobj, &m_als_gr); | |
| if (res) { | |
| dev_err(&client->dev, "isl29020: device create file failed\n"); | |
| return res; | |
| } | |
| dev_info(&client->dev, "%s isl29020: ALS chip found\n", client->name); | |
| als_set_power_state(client, 0); | |
| pm_runtime_enable(&client->dev); | |
| return res; | |
| } | |
| static void isl29020_remove(struct i2c_client *client) | |
| { | |
| pm_runtime_disable(&client->dev); | |
| sysfs_remove_group(&client->dev.kobj, &m_als_gr); | |
| } | |
| static const struct i2c_device_id isl29020_id[] = { | |
| { .name = "isl29020" }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, isl29020_id); | |
| #ifdef CONFIG_PM | |
| static int isl29020_runtime_suspend(struct device *dev) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| als_set_power_state(client, 0); | |
| return 0; | |
| } | |
| static int isl29020_runtime_resume(struct device *dev) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| als_set_power_state(client, 1); | |
| return 0; | |
| } | |
| static const struct dev_pm_ops isl29020_pm_ops = { | |
| .runtime_suspend = isl29020_runtime_suspend, | |
| .runtime_resume = isl29020_runtime_resume, | |
| }; | |
| #define ISL29020_PM_OPS (&isl29020_pm_ops) | |
| #else /* CONFIG_PM */ | |
| #define ISL29020_PM_OPS NULL | |
| #endif /* CONFIG_PM */ | |
| static struct i2c_driver isl29020_driver = { | |
| .driver = { | |
| .name = "isl29020", | |
| .pm = ISL29020_PM_OPS, | |
| }, | |
| .probe = isl29020_probe, | |
| .remove = isl29020_remove, | |
| .id_table = isl29020_id, | |
| }; | |
| module_i2c_driver(isl29020_driver); | |
| MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@intel.com>"); | |
| MODULE_DESCRIPTION("Intersil isl29020 ALS Driver"); | |
| MODULE_LICENSE("GPL v2"); |