| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * ALSA SoC Texas Instruments TPA6130A2 headset stereo amplifier driver | |
| * | |
| * Copyright (C) Nokia Corporation | |
| * | |
| * Author: Peter Ujfalusi <peter.ujfalusi@ti.com> | |
| */ | |
| #include <linux/device.h> | |
| #include <linux/errno.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/i2c.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/regmap.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <linux/slab.h> | |
| #include <sound/soc.h> | |
| #include <sound/tlv.h> | |
| #include "tpa6130a2.h" | |
| enum tpa_model { | |
| TPA6130A2, | |
| TPA6140A2, | |
| }; | |
| /* This struct is used to save the context */ | |
| struct tpa6130a2_data { | |
| struct device *dev; | |
| struct regmap *regmap; | |
| struct regulator *supply; | |
| struct gpio_desc *power_gpio; | |
| enum tpa_model id; | |
| }; | |
| static int tpa6130a2_power(struct tpa6130a2_data *data, bool enable) | |
| { | |
| int ret = 0, ret2; | |
| if (enable) { | |
| ret = regulator_enable(data->supply); | |
| if (ret != 0) { | |
| dev_err(data->dev, | |
| "Failed to enable supply: %d\n", ret); | |
| return ret; | |
| } | |
| /* Power on */ | |
| gpiod_set_value(data->power_gpio, 1); | |
| /* Sync registers */ | |
| regcache_cache_only(data->regmap, false); | |
| ret = regcache_sync(data->regmap); | |
| if (ret != 0) { | |
| dev_err(data->dev, | |
| "Failed to sync registers: %d\n", ret); | |
| regcache_cache_only(data->regmap, true); | |
| gpiod_set_value(data->power_gpio, 0); | |
| ret2 = regulator_disable(data->supply); | |
| if (ret2 != 0) | |
| dev_err(data->dev, | |
| "Failed to disable supply: %d\n", ret2); | |
| return ret; | |
| } | |
| } else { | |
| /* Powered off device does not retain registers. While device | |
| * is off, any register updates (i.e. volume changes) should | |
| * happen in cache only. | |
| */ | |
| regcache_mark_dirty(data->regmap); | |
| regcache_cache_only(data->regmap, true); | |
| /* Power off */ | |
| gpiod_set_value(data->power_gpio, 0); | |
| ret = regulator_disable(data->supply); | |
| if (ret != 0) { | |
| dev_err(data->dev, | |
| "Failed to disable supply: %d\n", ret); | |
| return ret; | |
| } | |
| } | |
| return ret; | |
| } | |
| static int tpa6130a2_power_event(struct snd_soc_dapm_widget *w, | |
| struct snd_kcontrol *kctrl, int event) | |
| { | |
| struct snd_soc_component *c = snd_soc_dapm_to_component(w->dapm); | |
| struct tpa6130a2_data *data = snd_soc_component_get_drvdata(c); | |
| if (SND_SOC_DAPM_EVENT_ON(event)) { | |
| /* Before widget power up: turn chip on, sync registers */ | |
| return tpa6130a2_power(data, true); | |
| } else { | |
| /* After widget power down: turn chip off */ | |
| return tpa6130a2_power(data, false); | |
| } | |
| } | |
| /* | |
| * TPA6130 volume. From -59.5 to 4 dB with increasing step size when going | |
| * down in gain. | |
| */ | |
| static const DECLARE_TLV_DB_RANGE(tpa6130_tlv, | |
| 0, 1, TLV_DB_SCALE_ITEM(-5950, 600, 0), | |
| 2, 3, TLV_DB_SCALE_ITEM(-5000, 250, 0), | |
| 4, 5, TLV_DB_SCALE_ITEM(-4550, 160, 0), | |
| 6, 7, TLV_DB_SCALE_ITEM(-4140, 190, 0), | |
| 8, 9, TLV_DB_SCALE_ITEM(-3650, 120, 0), | |
| 10, 11, TLV_DB_SCALE_ITEM(-3330, 160, 0), | |
| 12, 13, TLV_DB_SCALE_ITEM(-3040, 180, 0), | |
| 14, 20, TLV_DB_SCALE_ITEM(-2710, 110, 0), | |
| 21, 37, TLV_DB_SCALE_ITEM(-1960, 74, 0), | |
| 38, 63, TLV_DB_SCALE_ITEM(-720, 45, 0) | |
| ); | |
| static const struct snd_kcontrol_new tpa6130a2_controls[] = { | |
| SOC_SINGLE_TLV("Headphone Playback Volume", | |
| TPA6130A2_REG_VOL_MUTE, 0, 0x3f, 0, | |
| tpa6130_tlv), | |
| }; | |
| static const DECLARE_TLV_DB_RANGE(tpa6140_tlv, | |
| 0, 8, TLV_DB_SCALE_ITEM(-5900, 400, 0), | |
| 9, 16, TLV_DB_SCALE_ITEM(-2500, 200, 0), | |
| 17, 31, TLV_DB_SCALE_ITEM(-1000, 100, 0) | |
| ); | |
| static const struct snd_kcontrol_new tpa6140a2_controls[] = { | |
| SOC_SINGLE_TLV("Headphone Playback Volume", | |
| TPA6130A2_REG_VOL_MUTE, 1, 0x1f, 0, | |
| tpa6140_tlv), | |
| }; | |
| static int tpa6130a2_component_probe(struct snd_soc_component *component) | |
| { | |
| struct tpa6130a2_data *data = snd_soc_component_get_drvdata(component); | |
| if (data->id == TPA6140A2) | |
| return snd_soc_add_component_controls(component, | |
| tpa6140a2_controls, ARRAY_SIZE(tpa6140a2_controls)); | |
| else | |
| return snd_soc_add_component_controls(component, | |
| tpa6130a2_controls, ARRAY_SIZE(tpa6130a2_controls)); | |
| } | |
| static const struct snd_soc_dapm_widget tpa6130a2_dapm_widgets[] = { | |
| SND_SOC_DAPM_INPUT("LEFTIN"), | |
| SND_SOC_DAPM_INPUT("RIGHTIN"), | |
| SND_SOC_DAPM_OUTPUT("HPLEFT"), | |
| SND_SOC_DAPM_OUTPUT("HPRIGHT"), | |
| SND_SOC_DAPM_PGA("Left Mute", TPA6130A2_REG_VOL_MUTE, | |
| TPA6130A2_HP_EN_L_SHIFT, 1, NULL, 0), | |
| SND_SOC_DAPM_PGA("Right Mute", TPA6130A2_REG_VOL_MUTE, | |
| TPA6130A2_HP_EN_R_SHIFT, 1, NULL, 0), | |
| SND_SOC_DAPM_PGA("Left PGA", TPA6130A2_REG_CONTROL, | |
| TPA6130A2_HP_EN_L_SHIFT, 0, NULL, 0), | |
| SND_SOC_DAPM_PGA("Right PGA", TPA6130A2_REG_CONTROL, | |
| TPA6130A2_HP_EN_R_SHIFT, 0, NULL, 0), | |
| SND_SOC_DAPM_SUPPLY("Power", TPA6130A2_REG_CONTROL, | |
| TPA6130A2_SWS_SHIFT, 1, tpa6130a2_power_event, | |
| SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), | |
| }; | |
| static const struct snd_soc_dapm_route tpa6130a2_dapm_routes[] = { | |
| { "Left PGA", NULL, "LEFTIN" }, | |
| { "Right PGA", NULL, "RIGHTIN" }, | |
| { "Left Mute", NULL, "Left PGA" }, | |
| { "Right Mute", NULL, "Right PGA" }, | |
| { "HPLEFT", NULL, "Left Mute" }, | |
| { "HPRIGHT", NULL, "Right Mute" }, | |
| { "Left PGA", NULL, "Power" }, | |
| { "Right PGA", NULL, "Power" }, | |
| }; | |
| static const struct snd_soc_component_driver tpa6130a2_component_driver = { | |
| .name = "tpa6130a2", | |
| .probe = tpa6130a2_component_probe, | |
| .dapm_widgets = tpa6130a2_dapm_widgets, | |
| .num_dapm_widgets = ARRAY_SIZE(tpa6130a2_dapm_widgets), | |
| .dapm_routes = tpa6130a2_dapm_routes, | |
| .num_dapm_routes = ARRAY_SIZE(tpa6130a2_dapm_routes), | |
| }; | |
| static const struct reg_default tpa6130a2_reg_defaults[] = { | |
| { TPA6130A2_REG_CONTROL, TPA6130A2_SWS }, | |
| { TPA6130A2_REG_VOL_MUTE, TPA6130A2_MUTE_R | TPA6130A2_MUTE_L }, | |
| }; | |
| static const struct regmap_config tpa6130a2_regmap_config = { | |
| .reg_bits = 8, | |
| .val_bits = 8, | |
| .max_register = TPA6130A2_REG_VERSION, | |
| .reg_defaults = tpa6130a2_reg_defaults, | |
| .num_reg_defaults = ARRAY_SIZE(tpa6130a2_reg_defaults), | |
| .cache_type = REGCACHE_RBTREE, | |
| }; | |
| static int tpa6130a2_probe(struct i2c_client *client) | |
| { | |
| struct device *dev; | |
| struct tpa6130a2_data *data; | |
| struct device_node *np = client->dev.of_node; | |
| const char *regulator; | |
| unsigned int version; | |
| int ret; | |
| dev = &client->dev; | |
| data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); | |
| if (!data) | |
| return -ENOMEM; | |
| data->dev = dev; | |
| data->regmap = devm_regmap_init_i2c(client, &tpa6130a2_regmap_config); | |
| if (IS_ERR(data->regmap)) | |
| return PTR_ERR(data->regmap); | |
| if (np) { | |
| data->power_gpio = devm_gpiod_get_optional(dev, "power", GPIOD_OUT_LOW); | |
| if (IS_ERR(data->power_gpio)) { | |
| return dev_err_probe(dev, PTR_ERR(data->power_gpio), | |
| "Failed to request power GPIO\n"); | |
| } | |
| gpiod_set_consumer_name(data->power_gpio, "tpa6130a2 enable"); | |
| } else { | |
| dev_err(dev, "Platform data not set\n"); | |
| dump_stack(); | |
| return -ENODEV; | |
| } | |
| i2c_set_clientdata(client, data); | |
| data->id = (uintptr_t)i2c_get_match_data(client); | |
| switch (data->id) { | |
| default: | |
| dev_warn(dev, "Unknown TPA model (%d). Assuming 6130A2\n", | |
| data->id); | |
| fallthrough; | |
| case TPA6130A2: | |
| regulator = "Vdd"; | |
| break; | |
| case TPA6140A2: | |
| regulator = "AVdd"; | |
| break; | |
| } | |
| data->supply = devm_regulator_get(dev, regulator); | |
| if (IS_ERR(data->supply)) { | |
| ret = PTR_ERR(data->supply); | |
| dev_err(dev, "Failed to request supply: %d\n", ret); | |
| return ret; | |
| } | |
| ret = tpa6130a2_power(data, true); | |
| if (ret != 0) | |
| return ret; | |
| /* Read version */ | |
| regmap_read(data->regmap, TPA6130A2_REG_VERSION, &version); | |
| version &= TPA6130A2_VERSION_MASK; | |
| if ((version != 1) && (version != 2)) | |
| dev_warn(dev, "UNTESTED version detected (%d)\n", version); | |
| /* Disable the chip */ | |
| ret = tpa6130a2_power(data, false); | |
| if (ret != 0) | |
| return ret; | |
| return devm_snd_soc_register_component(&client->dev, | |
| &tpa6130a2_component_driver, NULL, 0); | |
| } | |
| #if IS_ENABLED(CONFIG_OF) | |
| static const struct of_device_id tpa6130a2_of_match[] = { | |
| { .compatible = "ti,tpa6130a2", }, | |
| { .compatible = "ti,tpa6140a2" }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, tpa6130a2_of_match); | |
| #endif | |
| static struct i2c_driver tpa6130a2_i2c_driver = { | |
| .driver = { | |
| .name = "tpa6130a2", | |
| .of_match_table = of_match_ptr(tpa6130a2_of_match), | |
| }, | |
| .probe = tpa6130a2_probe, | |
| }; | |
| module_i2c_driver(tpa6130a2_i2c_driver); | |
| MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>"); | |
| MODULE_DESCRIPTION("TPA6130A2 Headphone amplifier driver"); | |
| MODULE_LICENSE("GPL"); |