| /* SPDX-License-Identifier: GPL-2.0-only */ | |
| /* | |
| * Copyright (c) 2013-2021, Arm Limited. | |
| * | |
| * Adapted from the original at: | |
| * https://github.com/ARM-software/optimized-routines/blob/98e4d6a5c13c8e54/string/aarch64/strlen.S | |
| */ | |
| #include <linux/linkage.h> | |
| #include <asm/assembler.h> | |
| #include <asm/mte-def.h> | |
| /* Assumptions: | |
| * | |
| * ARMv8-a, AArch64, unaligned accesses, min page size 4k. | |
| */ | |
| #define L(label) .L ## label | |
| /* Arguments and results. */ | |
| #define srcin x0 | |
| #define len x0 | |
| /* Locals and temporaries. */ | |
| #define src x1 | |
| #define data1 x2 | |
| #define data2 x3 | |
| #define has_nul1 x4 | |
| #define has_nul2 x5 | |
| #define tmp1 x4 | |
| #define tmp2 x5 | |
| #define tmp3 x6 | |
| #define tmp4 x7 | |
| #define zeroones x8 | |
| /* NUL detection works on the principle that (X - 1) & (~X) & 0x80 | |
| (=> (X - 1) & ~(X | 0x7f)) is non-zero iff a byte is zero, and | |
| can be done in parallel across the entire word. A faster check | |
| (X - 1) & 0x80 is zero for non-NUL ASCII characters, but gives | |
| false hits for characters 129..255. */ | |
| #define REP8_01 0x0101010101010101 | |
| #define REP8_7f 0x7f7f7f7f7f7f7f7f | |
| #define REP8_80 0x8080808080808080 | |
| /* | |
| * When KASAN_HW_TAGS is in use, memory is checked at MTE_GRANULE_SIZE | |
| * (16-byte) granularity, and we must ensure that no access straddles this | |
| * alignment boundary. | |
| */ | |
| #ifdef CONFIG_KASAN_HW_TAGS | |
| #define MIN_PAGE_SIZE MTE_GRANULE_SIZE | |
| #else | |
| #define MIN_PAGE_SIZE 4096 | |
| #endif | |
| /* Since strings are short on average, we check the first 16 bytes | |
| of the string for a NUL character. In order to do an unaligned ldp | |
| safely we have to do a page cross check first. If there is a NUL | |
| byte we calculate the length from the 2 8-byte words using | |
| conditional select to reduce branch mispredictions (it is unlikely | |
| strlen will be repeatedly called on strings with the same length). | |
| If the string is longer than 16 bytes, we align src so don't need | |
| further page cross checks, and process 32 bytes per iteration | |
| using the fast NUL check. If we encounter non-ASCII characters, | |
| fallback to a second loop using the full NUL check. | |
| If the page cross check fails, we read 16 bytes from an aligned | |
| address, remove any characters before the string, and continue | |
| in the main loop using aligned loads. Since strings crossing a | |
| page in the first 16 bytes are rare (probability of | |
| 16/MIN_PAGE_SIZE ~= 0.4%), this case does not need to be optimized. | |
| AArch64 systems have a minimum page size of 4k. We don't bother | |
| checking for larger page sizes - the cost of setting up the correct | |
| page size is just not worth the extra gain from a small reduction in | |
| the cases taking the slow path. Note that we only care about | |
| whether the first fetch, which may be misaligned, crosses a page | |
| boundary. */ | |
| SYM_FUNC_START(__pi_strlen) | |
| and tmp1, srcin, MIN_PAGE_SIZE - 1 | |
| mov zeroones, REP8_01 | |
| cmp tmp1, MIN_PAGE_SIZE - 16 | |
| b.gt L(page_cross) | |
| ldp data1, data2, [srcin] | |
| #ifdef __AARCH64EB__ | |
| /* For big-endian, carry propagation (if the final byte in the | |
| string is 0x01) means we cannot use has_nul1/2 directly. | |
| Since we expect strings to be small and early-exit, | |
| byte-swap the data now so has_null1/2 will be correct. */ | |
| rev data1, data1 | |
| rev data2, data2 | |
| #endif | |
| sub tmp1, data1, zeroones | |
| orr tmp2, data1, REP8_7f | |
| sub tmp3, data2, zeroones | |
| orr tmp4, data2, REP8_7f | |
| bics has_nul1, tmp1, tmp2 | |
| bic has_nul2, tmp3, tmp4 | |
| ccmp has_nul2, 0, 0, eq | |
| beq L(main_loop_entry) | |
| /* Enter with C = has_nul1 == 0. */ | |
| csel has_nul1, has_nul1, has_nul2, cc | |
| mov len, 8 | |
| rev has_nul1, has_nul1 | |
| clz tmp1, has_nul1 | |
| csel len, xzr, len, cc | |
| add len, len, tmp1, lsr 3 | |
| ret | |
| /* The inner loop processes 32 bytes per iteration and uses the fast | |
| NUL check. If we encounter non-ASCII characters, use a second | |
| loop with the accurate NUL check. */ | |
| .p2align 4 | |
| L(main_loop_entry): | |
| bic src, srcin, 15 | |
| sub src, src, 16 | |
| L(main_loop): | |
| ldp data1, data2, [src, 32]! | |
| L(page_cross_entry): | |
| sub tmp1, data1, zeroones | |
| sub tmp3, data2, zeroones | |
| orr tmp2, tmp1, tmp3 | |
| tst tmp2, zeroones, lsl 7 | |
| bne 1f | |
| ldp data1, data2, [src, 16] | |
| sub tmp1, data1, zeroones | |
| sub tmp3, data2, zeroones | |
| orr tmp2, tmp1, tmp3 | |
| tst tmp2, zeroones, lsl 7 | |
| beq L(main_loop) | |
| add src, src, 16 | |
| 1: | |
| /* The fast check failed, so do the slower, accurate NUL check. */ | |
| orr tmp2, data1, REP8_7f | |
| orr tmp4, data2, REP8_7f | |
| bics has_nul1, tmp1, tmp2 | |
| bic has_nul2, tmp3, tmp4 | |
| ccmp has_nul2, 0, 0, eq | |
| beq L(nonascii_loop) | |
| /* Enter with C = has_nul1 == 0. */ | |
| L(tail): | |
| #ifdef __AARCH64EB__ | |
| /* For big-endian, carry propagation (if the final byte in the | |
| string is 0x01) means we cannot use has_nul1/2 directly. The | |
| easiest way to get the correct byte is to byte-swap the data | |
| and calculate the syndrome a second time. */ | |
| csel data1, data1, data2, cc | |
| rev data1, data1 | |
| sub tmp1, data1, zeroones | |
| orr tmp2, data1, REP8_7f | |
| bic has_nul1, tmp1, tmp2 | |
| #else | |
| csel has_nul1, has_nul1, has_nul2, cc | |
| #endif | |
| sub len, src, srcin | |
| rev has_nul1, has_nul1 | |
| add tmp2, len, 8 | |
| clz tmp1, has_nul1 | |
| csel len, len, tmp2, cc | |
| add len, len, tmp1, lsr 3 | |
| ret | |
| L(nonascii_loop): | |
| ldp data1, data2, [src, 16]! | |
| sub tmp1, data1, zeroones | |
| orr tmp2, data1, REP8_7f | |
| sub tmp3, data2, zeroones | |
| orr tmp4, data2, REP8_7f | |
| bics has_nul1, tmp1, tmp2 | |
| bic has_nul2, tmp3, tmp4 | |
| ccmp has_nul2, 0, 0, eq | |
| bne L(tail) | |
| ldp data1, data2, [src, 16]! | |
| sub tmp1, data1, zeroones | |
| orr tmp2, data1, REP8_7f | |
| sub tmp3, data2, zeroones | |
| orr tmp4, data2, REP8_7f | |
| bics has_nul1, tmp1, tmp2 | |
| bic has_nul2, tmp3, tmp4 | |
| ccmp has_nul2, 0, 0, eq | |
| beq L(nonascii_loop) | |
| b L(tail) | |
| /* Load 16 bytes from [srcin & ~15] and force the bytes that precede | |
| srcin to 0x7f, so we ignore any NUL bytes before the string. | |
| Then continue in the aligned loop. */ | |
| L(page_cross): | |
| bic src, srcin, 15 | |
| ldp data1, data2, [src] | |
| lsl tmp1, srcin, 3 | |
| mov tmp4, -1 | |
| #ifdef __AARCH64EB__ | |
| /* Big-endian. Early bytes are at MSB. */ | |
| lsr tmp1, tmp4, tmp1 /* Shift (tmp1 & 63). */ | |
| #else | |
| /* Little-endian. Early bytes are at LSB. */ | |
| lsl tmp1, tmp4, tmp1 /* Shift (tmp1 & 63). */ | |
| #endif | |
| orr tmp1, tmp1, REP8_80 | |
| orn data1, data1, tmp1 | |
| orn tmp2, data2, tmp1 | |
| tst srcin, 8 | |
| csel data1, data1, tmp4, eq | |
| csel data2, data2, tmp2, eq | |
| b L(page_cross_entry) | |
| SYM_FUNC_END(__pi_strlen) | |
| SYM_FUNC_ALIAS_WEAK(strlen, __pi_strlen) | |
| EXPORT_SYMBOL_NOKASAN(strlen) |