| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright (C) 2015 Dmitry Eremin-Solenikov | |
| * Copyright (C) 1999-2001 Nicolas Pitre | |
| * | |
| * Generic IRQ handling for the SA11x0. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/io.h> | |
| #include <linux/irq.h> | |
| #include <linux/irqdomain.h> | |
| #include <linux/syscore_ops.h> | |
| #include <linux/irqchip/irq-sa11x0.h> | |
| #include <soc/sa1100/pwer.h> | |
| #include <asm/exception.h> | |
| #define ICIP 0x00 /* IC IRQ Pending reg. */ | |
| #define ICMR 0x04 /* IC Mask Reg. */ | |
| #define ICLR 0x08 /* IC Level Reg. */ | |
| #define ICCR 0x0C /* IC Control Reg. */ | |
| #define ICFP 0x10 /* IC FIQ Pending reg. */ | |
| #define ICPR 0x20 /* IC Pending Reg. */ | |
| static void __iomem *iobase; | |
| /* | |
| * We don't need to ACK IRQs on the SA1100 unless they're GPIOs | |
| * this is for internal IRQs i.e. from IRQ LCD to RTCAlrm. | |
| */ | |
| static void sa1100_mask_irq(struct irq_data *d) | |
| { | |
| u32 reg; | |
| reg = readl_relaxed(iobase + ICMR); | |
| reg &= ~BIT(d->hwirq); | |
| writel_relaxed(reg, iobase + ICMR); | |
| } | |
| static void sa1100_unmask_irq(struct irq_data *d) | |
| { | |
| u32 reg; | |
| reg = readl_relaxed(iobase + ICMR); | |
| reg |= BIT(d->hwirq); | |
| writel_relaxed(reg, iobase + ICMR); | |
| } | |
| static int sa1100_set_wake(struct irq_data *d, unsigned int on) | |
| { | |
| return sa11x0_sc_set_wake(d->hwirq, on); | |
| } | |
| static struct irq_chip sa1100_normal_chip = { | |
| .name = "SC", | |
| .irq_ack = sa1100_mask_irq, | |
| .irq_mask = sa1100_mask_irq, | |
| .irq_unmask = sa1100_unmask_irq, | |
| .irq_set_wake = sa1100_set_wake, | |
| }; | |
| static int sa1100_normal_irqdomain_map(struct irq_domain *d, | |
| unsigned int irq, irq_hw_number_t hwirq) | |
| { | |
| irq_set_chip_and_handler(irq, &sa1100_normal_chip, | |
| handle_level_irq); | |
| return 0; | |
| } | |
| static const struct irq_domain_ops sa1100_normal_irqdomain_ops = { | |
| .map = sa1100_normal_irqdomain_map, | |
| .xlate = irq_domain_xlate_onetwocell, | |
| }; | |
| static struct irq_domain *sa1100_normal_irqdomain; | |
| static struct sa1100irq_state { | |
| unsigned int saved; | |
| unsigned int icmr; | |
| unsigned int iclr; | |
| unsigned int iccr; | |
| } sa1100irq_state; | |
| static int sa1100irq_suspend(void *data) | |
| { | |
| struct sa1100irq_state *st = &sa1100irq_state; | |
| st->saved = 1; | |
| st->icmr = readl_relaxed(iobase + ICMR); | |
| st->iclr = readl_relaxed(iobase + ICLR); | |
| st->iccr = readl_relaxed(iobase + ICCR); | |
| /* | |
| * Disable all GPIO-based interrupts. | |
| */ | |
| writel_relaxed(st->icmr & 0xfffff000, iobase + ICMR); | |
| return 0; | |
| } | |
| static void sa1100irq_resume(void *data) | |
| { | |
| struct sa1100irq_state *st = &sa1100irq_state; | |
| if (st->saved) { | |
| writel_relaxed(st->iccr, iobase + ICCR); | |
| writel_relaxed(st->iclr, iobase + ICLR); | |
| writel_relaxed(st->icmr, iobase + ICMR); | |
| } | |
| } | |
| static const struct syscore_ops sa1100irq_syscore_ops = { | |
| .suspend = sa1100irq_suspend, | |
| .resume = sa1100irq_resume, | |
| }; | |
| static struct syscore sa1100irq_syscore = { | |
| .ops = &sa1100irq_syscore_ops, | |
| }; | |
| static int __init sa1100irq_init_devicefs(void) | |
| { | |
| register_syscore(&sa1100irq_syscore); | |
| return 0; | |
| } | |
| device_initcall(sa1100irq_init_devicefs); | |
| static void __exception_irq_entry sa1100_handle_irq(struct pt_regs *regs) | |
| { | |
| uint32_t icip, icmr, mask; | |
| do { | |
| icip = readl_relaxed(iobase + ICIP); | |
| icmr = readl_relaxed(iobase + ICMR); | |
| mask = icip & icmr; | |
| if (mask == 0) | |
| break; | |
| generic_handle_domain_irq(sa1100_normal_irqdomain, | |
| ffs(mask) - 1); | |
| } while (1); | |
| } | |
| void __init sa11x0_init_irq_nodt(int irq_start, resource_size_t io_start) | |
| { | |
| iobase = ioremap(io_start, SZ_64K); | |
| if (WARN_ON(!iobase)) | |
| return; | |
| /* disable all IRQs */ | |
| writel_relaxed(0, iobase + ICMR); | |
| /* all IRQs are IRQ, not FIQ */ | |
| writel_relaxed(0, iobase + ICLR); | |
| /* | |
| * Whatever the doc says, this has to be set for the wait-on-irq | |
| * instruction to work... on a SA1100 rev 9 at least. | |
| */ | |
| writel_relaxed(1, iobase + ICCR); | |
| sa1100_normal_irqdomain = irq_domain_create_simple(NULL, | |
| 32, irq_start, | |
| &sa1100_normal_irqdomain_ops, NULL); | |
| set_handle_irq(sa1100_handle_irq); | |
| } |