| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * NXP TDA18212HN silicon tuner driver | |
| * | |
| * Copyright (C) 2011 Antti Palosaari <crope@iki.fi> | |
| */ | |
| #include "tda18212.h" | |
| #include <linux/regmap.h> | |
| struct tda18212_dev { | |
| struct tda18212_config cfg; | |
| struct i2c_client *client; | |
| struct regmap *regmap; | |
| u32 if_frequency; | |
| }; | |
| static int tda18212_set_params(struct dvb_frontend *fe) | |
| { | |
| struct tda18212_dev *dev = fe->tuner_priv; | |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
| int ret, i; | |
| u32 if_khz; | |
| u8 buf[9]; | |
| #define DVBT_6 0 | |
| #define DVBT_7 1 | |
| #define DVBT_8 2 | |
| #define DVBT2_6 3 | |
| #define DVBT2_7 4 | |
| #define DVBT2_8 5 | |
| #define DVBC_6 6 | |
| #define DVBC_8 7 | |
| #define ATSC_VSB 8 | |
| #define ATSC_QAM 9 | |
| static const u8 bw_params[][3] = { | |
| /* reg: 0f 13 23 */ | |
| [DVBT_6] = { 0xb3, 0x20, 0x03 }, | |
| [DVBT_7] = { 0xb3, 0x31, 0x01 }, | |
| [DVBT_8] = { 0xb3, 0x22, 0x01 }, | |
| [DVBT2_6] = { 0xbc, 0x20, 0x03 }, | |
| [DVBT2_7] = { 0xbc, 0x72, 0x03 }, | |
| [DVBT2_8] = { 0xbc, 0x22, 0x01 }, | |
| [DVBC_6] = { 0x92, 0x50, 0x03 }, | |
| [DVBC_8] = { 0x92, 0x53, 0x03 }, | |
| [ATSC_VSB] = { 0x7d, 0x20, 0x63 }, | |
| [ATSC_QAM] = { 0x7d, 0x20, 0x63 }, | |
| }; | |
| dev_dbg(&dev->client->dev, | |
| "delivery_system=%d frequency=%d bandwidth_hz=%d\n", | |
| c->delivery_system, c->frequency, | |
| c->bandwidth_hz); | |
| if (fe->ops.i2c_gate_ctrl) | |
| fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */ | |
| switch (c->delivery_system) { | |
| case SYS_ATSC: | |
| if_khz = dev->cfg.if_atsc_vsb; | |
| i = ATSC_VSB; | |
| break; | |
| case SYS_DVBC_ANNEX_B: | |
| if_khz = dev->cfg.if_atsc_qam; | |
| i = ATSC_QAM; | |
| break; | |
| case SYS_DVBT: | |
| switch (c->bandwidth_hz) { | |
| case 6000000: | |
| if_khz = dev->cfg.if_dvbt_6; | |
| i = DVBT_6; | |
| break; | |
| case 7000000: | |
| if_khz = dev->cfg.if_dvbt_7; | |
| i = DVBT_7; | |
| break; | |
| case 8000000: | |
| if_khz = dev->cfg.if_dvbt_8; | |
| i = DVBT_8; | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| goto error; | |
| } | |
| break; | |
| case SYS_DVBT2: | |
| switch (c->bandwidth_hz) { | |
| case 6000000: | |
| if_khz = dev->cfg.if_dvbt2_6; | |
| i = DVBT2_6; | |
| break; | |
| case 7000000: | |
| if_khz = dev->cfg.if_dvbt2_7; | |
| i = DVBT2_7; | |
| break; | |
| case 8000000: | |
| if_khz = dev->cfg.if_dvbt2_8; | |
| i = DVBT2_8; | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| goto error; | |
| } | |
| break; | |
| case SYS_DVBC_ANNEX_A: | |
| case SYS_DVBC_ANNEX_C: | |
| if_khz = dev->cfg.if_dvbc; | |
| i = DVBC_8; | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| goto error; | |
| } | |
| ret = regmap_write(dev->regmap, 0x23, bw_params[i][2]); | |
| if (ret) | |
| goto error; | |
| ret = regmap_write(dev->regmap, 0x06, 0x00); | |
| if (ret) | |
| goto error; | |
| ret = regmap_write(dev->regmap, 0x0f, bw_params[i][0]); | |
| if (ret) | |
| goto error; | |
| buf[0] = 0x02; | |
| buf[1] = bw_params[i][1]; | |
| buf[2] = 0x03; /* default value */ | |
| buf[3] = DIV_ROUND_CLOSEST(if_khz, 50); | |
| buf[4] = ((c->frequency / 1000) >> 16) & 0xff; | |
| buf[5] = ((c->frequency / 1000) >> 8) & 0xff; | |
| buf[6] = ((c->frequency / 1000) >> 0) & 0xff; | |
| buf[7] = 0xc1; | |
| buf[8] = 0x01; | |
| ret = regmap_bulk_write(dev->regmap, 0x12, buf, sizeof(buf)); | |
| if (ret) | |
| goto error; | |
| /* actual IF rounded as it is on register */ | |
| dev->if_frequency = buf[3] * 50 * 1000; | |
| exit: | |
| if (fe->ops.i2c_gate_ctrl) | |
| fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */ | |
| return ret; | |
| error: | |
| dev_dbg(&dev->client->dev, "failed=%d\n", ret); | |
| goto exit; | |
| } | |
| static int tda18212_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) | |
| { | |
| struct tda18212_dev *dev = fe->tuner_priv; | |
| *frequency = dev->if_frequency; | |
| return 0; | |
| } | |
| static const struct dvb_tuner_ops tda18212_tuner_ops = { | |
| .info = { | |
| .name = "NXP TDA18212", | |
| .frequency_min_hz = 48 * MHz, | |
| .frequency_max_hz = 864 * MHz, | |
| .frequency_step_hz = 1 * kHz, | |
| }, | |
| .set_params = tda18212_set_params, | |
| .get_if_frequency = tda18212_get_if_frequency, | |
| }; | |
| static int tda18212_probe(struct i2c_client *client) | |
| { | |
| struct tda18212_config *cfg = client->dev.platform_data; | |
| struct dvb_frontend *fe = cfg->fe; | |
| struct tda18212_dev *dev; | |
| int ret; | |
| unsigned int chip_id; | |
| char *version; | |
| static const struct regmap_config regmap_config = { | |
| .reg_bits = 8, | |
| .val_bits = 8, | |
| }; | |
| dev = kzalloc_obj(*dev); | |
| if (dev == NULL) { | |
| ret = -ENOMEM; | |
| dev_err(&client->dev, "kzalloc() failed\n"); | |
| goto err; | |
| } | |
| memcpy(&dev->cfg, cfg, sizeof(struct tda18212_config)); | |
| dev->client = client; | |
| dev->regmap = devm_regmap_init_i2c(client, ®map_config); | |
| if (IS_ERR(dev->regmap)) { | |
| ret = PTR_ERR(dev->regmap); | |
| goto err; | |
| } | |
| /* check if the tuner is there */ | |
| if (fe->ops.i2c_gate_ctrl) | |
| fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */ | |
| ret = regmap_read(dev->regmap, 0x00, &chip_id); | |
| dev_dbg(&dev->client->dev, "chip_id=%02x\n", chip_id); | |
| if (fe->ops.i2c_gate_ctrl) | |
| fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */ | |
| if (ret) | |
| goto err; | |
| switch (chip_id) { | |
| case 0xc7: | |
| version = "M"; /* master */ | |
| break; | |
| case 0x47: | |
| version = "S"; /* slave */ | |
| break; | |
| default: | |
| ret = -ENODEV; | |
| goto err; | |
| } | |
| dev_info(&dev->client->dev, | |
| "NXP TDA18212HN/%s successfully identified\n", version); | |
| fe->tuner_priv = dev; | |
| memcpy(&fe->ops.tuner_ops, &tda18212_tuner_ops, | |
| sizeof(struct dvb_tuner_ops)); | |
| i2c_set_clientdata(client, dev); | |
| return 0; | |
| err: | |
| dev_dbg(&client->dev, "failed=%d\n", ret); | |
| kfree(dev); | |
| return ret; | |
| } | |
| static void tda18212_remove(struct i2c_client *client) | |
| { | |
| struct tda18212_dev *dev = i2c_get_clientdata(client); | |
| struct dvb_frontend *fe = dev->cfg.fe; | |
| dev_dbg(&client->dev, "\n"); | |
| memset(&fe->ops.tuner_ops, 0, sizeof(struct dvb_tuner_ops)); | |
| fe->tuner_priv = NULL; | |
| kfree(dev); | |
| } | |
| static const struct i2c_device_id tda18212_id[] = { | |
| { .name = "tda18212" }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, tda18212_id); | |
| static struct i2c_driver tda18212_driver = { | |
| .driver = { | |
| .name = "tda18212", | |
| }, | |
| .probe = tda18212_probe, | |
| .remove = tda18212_remove, | |
| .id_table = tda18212_id, | |
| }; | |
| module_i2c_driver(tda18212_driver); | |
| MODULE_DESCRIPTION("NXP TDA18212HN silicon tuner driver"); | |
| MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); | |
| MODULE_LICENSE("GPL"); |