| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Driver for Marvell Xenon SDHC as a platform device | |
| * | |
| * Copyright (C) 2016 Marvell, All Rights Reserved. | |
| * | |
| * Author: Hu Ziji <huziji@marvell.com> | |
| * Date: 2016-8-24 | |
| * | |
| * Inspired by Jisheng Zhang <jszhang@marvell.com> | |
| * Special thanks to Video BG4 project team. | |
| */ | |
| #include <linux/acpi.h> | |
| #include <linux/delay.h> | |
| #include <linux/ktime.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/pm.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/mm.h> | |
| #include <linux/dma-mapping.h> | |
| #include "sdhci-pltfm.h" | |
| #include "sdhci-xenon.h" | |
| static int xenon_enable_internal_clk(struct sdhci_host *host) | |
| { | |
| u32 reg; | |
| ktime_t timeout; | |
| reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL); | |
| reg |= SDHCI_CLOCK_INT_EN; | |
| sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL); | |
| /* Wait max 20 ms */ | |
| timeout = ktime_add_ms(ktime_get(), 20); | |
| while (1) { | |
| bool timedout = ktime_after(ktime_get(), timeout); | |
| reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL); | |
| if (reg & SDHCI_CLOCK_INT_STABLE) | |
| break; | |
| if (timedout) { | |
| dev_err(mmc_dev(host->mmc), "Internal clock never stabilised.\n"); | |
| return -ETIMEDOUT; | |
| } | |
| usleep_range(900, 1100); | |
| } | |
| return 0; | |
| } | |
| /* Set SDCLK-off-while-idle */ | |
| static void xenon_set_sdclk_off_idle(struct sdhci_host *host, | |
| unsigned char sdhc_id, bool enable) | |
| { | |
| u32 reg; | |
| u32 mask; | |
| reg = sdhci_readl(host, XENON_SYS_OP_CTRL); | |
| /* Get the bit shift basing on the SDHC index */ | |
| mask = (0x1 << (XENON_SDCLK_IDLEOFF_ENABLE_SHIFT + sdhc_id)); | |
| if (enable) | |
| reg |= mask; | |
| else | |
| reg &= ~mask; | |
| sdhci_writel(host, reg, XENON_SYS_OP_CTRL); | |
| } | |
| /* Enable/Disable the Auto Clock Gating function */ | |
| static void xenon_set_acg(struct sdhci_host *host, bool enable) | |
| { | |
| u32 reg; | |
| reg = sdhci_readl(host, XENON_SYS_OP_CTRL); | |
| if (enable) | |
| reg &= ~XENON_AUTO_CLKGATE_DISABLE_MASK; | |
| else | |
| reg |= XENON_AUTO_CLKGATE_DISABLE_MASK; | |
| sdhci_writel(host, reg, XENON_SYS_OP_CTRL); | |
| } | |
| /* Enable this SDHC */ | |
| static void xenon_enable_sdhc(struct sdhci_host *host, | |
| unsigned char sdhc_id) | |
| { | |
| u32 reg; | |
| reg = sdhci_readl(host, XENON_SYS_OP_CTRL); | |
| reg |= (BIT(sdhc_id) << XENON_SLOT_ENABLE_SHIFT); | |
| sdhci_writel(host, reg, XENON_SYS_OP_CTRL); | |
| host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY; | |
| /* | |
| * Force to clear BUS_TEST to | |
| * skip bus_test_pre and bus_test_post | |
| */ | |
| host->mmc->caps &= ~MMC_CAP_BUS_WIDTH_TEST; | |
| } | |
| /* Disable this SDHC */ | |
| static void xenon_disable_sdhc(struct sdhci_host *host, | |
| unsigned char sdhc_id) | |
| { | |
| u32 reg; | |
| reg = sdhci_readl(host, XENON_SYS_OP_CTRL); | |
| reg &= ~(BIT(sdhc_id) << XENON_SLOT_ENABLE_SHIFT); | |
| sdhci_writel(host, reg, XENON_SYS_OP_CTRL); | |
| } | |
| /* Enable Parallel Transfer Mode */ | |
| static void xenon_enable_sdhc_parallel_tran(struct sdhci_host *host, | |
| unsigned char sdhc_id) | |
| { | |
| u32 reg; | |
| reg = sdhci_readl(host, XENON_SYS_EXT_OP_CTRL); | |
| reg |= BIT(sdhc_id); | |
| sdhci_writel(host, reg, XENON_SYS_EXT_OP_CTRL); | |
| } | |
| /* Mask command conflict error */ | |
| static void xenon_mask_cmd_conflict_err(struct sdhci_host *host) | |
| { | |
| u32 reg; | |
| reg = sdhci_readl(host, XENON_SYS_EXT_OP_CTRL); | |
| reg |= XENON_MASK_CMD_CONFLICT_ERR; | |
| sdhci_writel(host, reg, XENON_SYS_EXT_OP_CTRL); | |
| } | |
| static void xenon_retune_setup(struct sdhci_host *host) | |
| { | |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); | |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); | |
| u32 reg; | |
| /* Disable the Re-Tuning Request functionality */ | |
| reg = sdhci_readl(host, XENON_SLOT_RETUNING_REQ_CTRL); | |
| reg &= ~XENON_RETUNING_COMPATIBLE; | |
| sdhci_writel(host, reg, XENON_SLOT_RETUNING_REQ_CTRL); | |
| /* Disable the Re-tuning Interrupt */ | |
| reg = sdhci_readl(host, SDHCI_SIGNAL_ENABLE); | |
| reg &= ~SDHCI_INT_RETUNE; | |
| sdhci_writel(host, reg, SDHCI_SIGNAL_ENABLE); | |
| reg = sdhci_readl(host, SDHCI_INT_ENABLE); | |
| reg &= ~SDHCI_INT_RETUNE; | |
| sdhci_writel(host, reg, SDHCI_INT_ENABLE); | |
| /* Force to use Tuning Mode 1 */ | |
| host->tuning_mode = SDHCI_TUNING_MODE_1; | |
| /* Set re-tuning period */ | |
| host->tuning_count = 1 << (priv->tuning_count - 1); | |
| } | |
| /* | |
| * Operations inside struct sdhci_ops | |
| */ | |
| /* Recover the Register Setting cleared during SOFTWARE_RESET_ALL */ | |
| static void xenon_reset_exit(struct sdhci_host *host, | |
| unsigned char sdhc_id, u8 mask) | |
| { | |
| /* Only SOFTWARE RESET ALL will clear the register setting */ | |
| if (!(mask & SDHCI_RESET_ALL)) | |
| return; | |
| /* Disable tuning request and auto-retuning again */ | |
| xenon_retune_setup(host); | |
| /* | |
| * The ACG should be turned off at the early init time, in order | |
| * to solve a possible issues with the 1.8V regulator stabilization. | |
| * The feature is enabled in later stage. | |
| */ | |
| xenon_set_acg(host, false); | |
| xenon_set_sdclk_off_idle(host, sdhc_id, false); | |
| xenon_mask_cmd_conflict_err(host); | |
| } | |
| static void xenon_reset(struct sdhci_host *host, u8 mask) | |
| { | |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); | |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); | |
| sdhci_reset(host, mask); | |
| xenon_reset_exit(host, priv->sdhc_id, mask); | |
| } | |
| /* | |
| * Xenon defines different values for HS200 and HS400 | |
| * in Host_Control_2 | |
| */ | |
| static void xenon_set_uhs_signaling(struct sdhci_host *host, | |
| unsigned int timing) | |
| { | |
| u16 ctrl_2; | |
| ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); | |
| /* Select Bus Speed Mode for host */ | |
| ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; | |
| if (timing == MMC_TIMING_MMC_HS200) | |
| ctrl_2 |= XENON_CTRL_HS200; | |
| else if (timing == MMC_TIMING_UHS_SDR104) | |
| ctrl_2 |= SDHCI_CTRL_UHS_SDR104; | |
| else if (timing == MMC_TIMING_UHS_SDR12) | |
| ctrl_2 |= SDHCI_CTRL_UHS_SDR12; | |
| else if (timing == MMC_TIMING_UHS_SDR25) | |
| ctrl_2 |= SDHCI_CTRL_UHS_SDR25; | |
| else if (timing == MMC_TIMING_UHS_SDR50) | |
| ctrl_2 |= SDHCI_CTRL_UHS_SDR50; | |
| else if ((timing == MMC_TIMING_UHS_DDR50) || | |
| (timing == MMC_TIMING_MMC_DDR52)) | |
| ctrl_2 |= SDHCI_CTRL_UHS_DDR50; | |
| else if (timing == MMC_TIMING_MMC_HS400) | |
| ctrl_2 |= XENON_CTRL_HS400; | |
| sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); | |
| } | |
| static void xenon_set_power(struct sdhci_host *host, unsigned char mode, | |
| unsigned short vdd) | |
| { | |
| struct mmc_host *mmc = host->mmc; | |
| u8 pwr = host->pwr; | |
| sdhci_set_power_noreg(host, mode, vdd); | |
| if (host->pwr == pwr) | |
| return; | |
| if (host->pwr == 0) | |
| vdd = 0; | |
| if (!IS_ERR(mmc->supply.vmmc)) | |
| mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); | |
| } | |
| static void xenon_voltage_switch(struct sdhci_host *host) | |
| { | |
| /* Wait for 5ms after set 1.8V signal enable bit */ | |
| usleep_range(5000, 5500); | |
| } | |
| static unsigned int xenon_get_max_clock(struct sdhci_host *host) | |
| { | |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); | |
| if (pltfm_host->clk) | |
| return sdhci_pltfm_clk_get_max_clock(host); | |
| else | |
| return pltfm_host->clock; | |
| } | |
| static const struct sdhci_ops sdhci_xenon_ops = { | |
| .voltage_switch = xenon_voltage_switch, | |
| .set_clock = sdhci_set_clock, | |
| .set_power = xenon_set_power, | |
| .set_bus_width = sdhci_set_bus_width, | |
| .reset = xenon_reset, | |
| .set_uhs_signaling = xenon_set_uhs_signaling, | |
| .get_max_clock = xenon_get_max_clock, | |
| }; | |
| static const struct sdhci_pltfm_data sdhci_xenon_pdata = { | |
| .ops = &sdhci_xenon_ops, | |
| .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | | |
| SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER | | |
| SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, | |
| }; | |
| /* | |
| * Xenon Specific Operations in mmc_host_ops | |
| */ | |
| static void xenon_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) | |
| { | |
| struct sdhci_host *host = mmc_priv(mmc); | |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); | |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); | |
| u32 reg; | |
| /* | |
| * HS400/HS200/eMMC HS doesn't have Preset Value register. | |
| * However, sdhci_set_ios will read HS400/HS200 Preset register. | |
| * Disable Preset Value register for HS400/HS200. | |
| * eMMC HS with preset_enabled set will trigger a bug in | |
| * get_preset_value(). | |
| */ | |
| if ((ios->timing == MMC_TIMING_MMC_HS400) || | |
| (ios->timing == MMC_TIMING_MMC_HS200) || | |
| (ios->timing == MMC_TIMING_MMC_HS)) { | |
| host->preset_enabled = false; | |
| host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN; | |
| host->flags &= ~SDHCI_PV_ENABLED; | |
| reg = sdhci_readw(host, SDHCI_HOST_CONTROL2); | |
| reg &= ~SDHCI_CTRL_PRESET_VAL_ENABLE; | |
| sdhci_writew(host, reg, SDHCI_HOST_CONTROL2); | |
| } else { | |
| host->quirks2 &= ~SDHCI_QUIRK2_PRESET_VALUE_BROKEN; | |
| } | |
| sdhci_set_ios(mmc, ios); | |
| xenon_phy_adj(host, ios); | |
| if (host->clock > XENON_DEFAULT_SDCLK_FREQ) | |
| xenon_set_sdclk_off_idle(host, priv->sdhc_id, true); | |
| } | |
| static int xenon_start_signal_voltage_switch(struct mmc_host *mmc, | |
| struct mmc_ios *ios) | |
| { | |
| struct sdhci_host *host = mmc_priv(mmc); | |
| /* | |
| * Before SD/SDIO set signal voltage, SD bus clock should be | |
| * disabled. However, sdhci_set_clock will also disable the Internal | |
| * clock in mmc_set_signal_voltage(). | |
| * If Internal clock is disabled, the 3.3V/1.8V bit can not be updated. | |
| * Thus here manually enable internal clock. | |
| * | |
| * After switch completes, it is unnecessary to disable internal clock, | |
| * since keeping internal clock active obeys SD spec. | |
| */ | |
| xenon_enable_internal_clk(host); | |
| xenon_soc_pad_ctrl(host, ios->signal_voltage); | |
| /* | |
| * If Vqmmc is fixed on platform, vqmmc regulator should be unavailable. | |
| * Thus SDHCI_CTRL_VDD_180 bit might not work then. | |
| * Skip the standard voltage switch to avoid any issue. | |
| */ | |
| if (PTR_ERR(mmc->supply.vqmmc) == -ENODEV) | |
| return 0; | |
| return sdhci_start_signal_voltage_switch(mmc, ios); | |
| } | |
| /* | |
| * Update card type. | |
| * priv->init_card_type will be used in PHY timing adjustment. | |
| */ | |
| static void xenon_init_card(struct mmc_host *mmc, struct mmc_card *card) | |
| { | |
| struct sdhci_host *host = mmc_priv(mmc); | |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); | |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); | |
| /* Update card type*/ | |
| priv->init_card_type = card->type; | |
| } | |
| static int xenon_execute_tuning(struct mmc_host *mmc, u32 opcode) | |
| { | |
| struct sdhci_host *host = mmc_priv(mmc); | |
| if (host->timing == MMC_TIMING_UHS_DDR50 || | |
| host->timing == MMC_TIMING_MMC_DDR52) | |
| return 0; | |
| /* | |
| * Currently force Xenon driver back to support mode 1 only, | |
| * even though Xenon might claim to support mode 2 or mode 3. | |
| * It requires more time to test mode 2/mode 3 on more platforms. | |
| */ | |
| if (host->tuning_mode != SDHCI_TUNING_MODE_1) | |
| xenon_retune_setup(host); | |
| return sdhci_execute_tuning(mmc, opcode); | |
| } | |
| static void xenon_enable_sdio_irq(struct mmc_host *mmc, int enable) | |
| { | |
| struct sdhci_host *host = mmc_priv(mmc); | |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); | |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); | |
| u32 reg; | |
| u8 sdhc_id = priv->sdhc_id; | |
| sdhci_enable_sdio_irq(mmc, enable); | |
| if (enable) { | |
| /* | |
| * Set SDIO Card Inserted indication | |
| * to enable detecting SDIO async irq. | |
| */ | |
| reg = sdhci_readl(host, XENON_SYS_CFG_INFO); | |
| reg |= (1 << (sdhc_id + XENON_SLOT_TYPE_SDIO_SHIFT)); | |
| sdhci_writel(host, reg, XENON_SYS_CFG_INFO); | |
| } else { | |
| /* Clear SDIO Card Inserted indication */ | |
| reg = sdhci_readl(host, XENON_SYS_CFG_INFO); | |
| reg &= ~(1 << (sdhc_id + XENON_SLOT_TYPE_SDIO_SHIFT)); | |
| sdhci_writel(host, reg, XENON_SYS_CFG_INFO); | |
| } | |
| } | |
| static void xenon_replace_mmc_host_ops(struct sdhci_host *host) | |
| { | |
| host->mmc_host_ops.set_ios = xenon_set_ios; | |
| host->mmc_host_ops.start_signal_voltage_switch = | |
| xenon_start_signal_voltage_switch; | |
| host->mmc_host_ops.init_card = xenon_init_card; | |
| host->mmc_host_ops.execute_tuning = xenon_execute_tuning; | |
| host->mmc_host_ops.enable_sdio_irq = xenon_enable_sdio_irq; | |
| } | |
| /* | |
| * Parse Xenon specific DT properties: | |
| * sdhc-id: the index of current SDHC. | |
| * Refer to XENON_SYS_CFG_INFO register | |
| * tun-count: the interval between re-tuning | |
| */ | |
| static int xenon_probe_params(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct sdhci_host *host = platform_get_drvdata(pdev); | |
| struct mmc_host *mmc = host->mmc; | |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); | |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); | |
| u32 sdhc_id, nr_sdhc; | |
| u32 tuning_count; | |
| struct sysinfo si; | |
| /* Disable HS200 on Armada AP806 */ | |
| if (priv->hw_version == XENON_AP806) | |
| host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200; | |
| sdhc_id = 0x0; | |
| if (!device_property_read_u32(dev, "marvell,xenon-sdhc-id", &sdhc_id)) { | |
| nr_sdhc = sdhci_readl(host, XENON_SYS_CFG_INFO); | |
| nr_sdhc &= XENON_NR_SUPPORTED_SLOT_MASK; | |
| if (unlikely(sdhc_id > nr_sdhc)) { | |
| dev_err(mmc_dev(mmc), "SDHC Index %d exceeds Number of SDHCs %d\n", | |
| sdhc_id, nr_sdhc); | |
| return -EINVAL; | |
| } | |
| } | |
| priv->sdhc_id = sdhc_id; | |
| tuning_count = XENON_DEF_TUNING_COUNT; | |
| if (!device_property_read_u32(dev, "marvell,xenon-tun-count", | |
| &tuning_count)) { | |
| if (unlikely(tuning_count >= XENON_TMR_RETUN_NO_PRESENT)) { | |
| dev_err(mmc_dev(mmc), "Wrong Re-tuning Count. Set default value %d\n", | |
| XENON_DEF_TUNING_COUNT); | |
| tuning_count = XENON_DEF_TUNING_COUNT; | |
| } | |
| } | |
| priv->tuning_count = tuning_count; | |
| /* | |
| * AC5/X/IM HW has only 31-bits passed in the crossbar switch. | |
| * If we have more than 2GB of memory, this means we might pass | |
| * memory pointers which are above 2GB and which cannot be properly | |
| * represented. In this case, disable ADMA, 64-bit DMA and allow only SDMA. | |
| * This effectively will enable bounce buffer quirk in the | |
| * generic SDHCI driver, which will make sure DMA is only done | |
| * from supported memory regions: | |
| */ | |
| if (priv->hw_version == XENON_AC5) { | |
| si_meminfo(&si); | |
| if (si.totalram * si.mem_unit > SZ_2G) { | |
| host->quirks |= SDHCI_QUIRK_BROKEN_ADMA; | |
| host->quirks2 |= SDHCI_QUIRK2_BROKEN_64_BIT_DMA; | |
| } | |
| } | |
| return xenon_phy_parse_params(dev, host); | |
| } | |
| static int xenon_sdhc_prepare(struct sdhci_host *host) | |
| { | |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); | |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); | |
| u8 sdhc_id = priv->sdhc_id; | |
| /* Enable SDHC */ | |
| xenon_enable_sdhc(host, sdhc_id); | |
| /* Enable ACG */ | |
| xenon_set_acg(host, true); | |
| /* Enable Parallel Transfer Mode */ | |
| xenon_enable_sdhc_parallel_tran(host, sdhc_id); | |
| /* Disable SDCLK-Off-While-Idle before card init */ | |
| xenon_set_sdclk_off_idle(host, sdhc_id, false); | |
| xenon_mask_cmd_conflict_err(host); | |
| return 0; | |
| } | |
| static void xenon_sdhc_unprepare(struct sdhci_host *host) | |
| { | |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); | |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); | |
| u8 sdhc_id = priv->sdhc_id; | |
| /* disable SDHC */ | |
| xenon_disable_sdhc(host, sdhc_id); | |
| } | |
| static int xenon_probe(struct platform_device *pdev) | |
| { | |
| struct sdhci_pltfm_host *pltfm_host; | |
| struct device *dev = &pdev->dev; | |
| struct sdhci_host *host; | |
| struct xenon_priv *priv; | |
| int err; | |
| host = sdhci_pltfm_init(pdev, &sdhci_xenon_pdata, | |
| sizeof(struct xenon_priv)); | |
| if (IS_ERR(host)) | |
| return PTR_ERR(host); | |
| pltfm_host = sdhci_priv(host); | |
| priv = sdhci_pltfm_priv(pltfm_host); | |
| priv->hw_version = (unsigned long)device_get_match_data(&pdev->dev); | |
| /* | |
| * Link Xenon specific mmc_host_ops function, | |
| * to replace standard ones in sdhci_ops. | |
| */ | |
| xenon_replace_mmc_host_ops(host); | |
| if (dev->of_node) { | |
| pltfm_host->clk = devm_clk_get(&pdev->dev, "core"); | |
| if (IS_ERR(pltfm_host->clk)) | |
| return dev_err_probe(&pdev->dev, PTR_ERR(pltfm_host->clk), | |
| "Failed to setup input clk.\n"); | |
| err = clk_prepare_enable(pltfm_host->clk); | |
| if (err) | |
| return err; | |
| priv->axi_clk = devm_clk_get(&pdev->dev, "axi"); | |
| if (IS_ERR(priv->axi_clk)) { | |
| err = PTR_ERR(priv->axi_clk); | |
| if (err == -EPROBE_DEFER) | |
| goto err_clk; | |
| } else { | |
| err = clk_prepare_enable(priv->axi_clk); | |
| if (err) | |
| goto err_clk; | |
| } | |
| } | |
| err = mmc_of_parse(host->mmc); | |
| if (err) | |
| goto err_clk_axi; | |
| sdhci_get_property(pdev); | |
| xenon_set_acg(host, false); | |
| /* Xenon specific parameters parse */ | |
| err = xenon_probe_params(pdev); | |
| if (err) | |
| goto err_clk_axi; | |
| err = xenon_sdhc_prepare(host); | |
| if (err) | |
| goto err_clk_axi; | |
| pm_runtime_get_noresume(&pdev->dev); | |
| pm_runtime_set_active(&pdev->dev); | |
| pm_runtime_set_autosuspend_delay(&pdev->dev, 50); | |
| pm_runtime_use_autosuspend(&pdev->dev); | |
| pm_runtime_enable(&pdev->dev); | |
| pm_suspend_ignore_children(&pdev->dev, 1); | |
| err = sdhci_add_host(host); | |
| if (err) | |
| goto remove_sdhc; | |
| pm_runtime_put_autosuspend(&pdev->dev); | |
| /* | |
| * If we previously detected AC5 with over 2GB of memory, | |
| * then we disable ADMA and 64-bit DMA. | |
| * This means generic SDHCI driver has set the DMA mask to | |
| * 32-bit. Since DDR starts at 0x2_0000_0000, we must use | |
| * 34-bit DMA mask to access this DDR memory: | |
| */ | |
| if (priv->hw_version == XENON_AC5 && | |
| host->quirks2 & SDHCI_QUIRK2_BROKEN_64_BIT_DMA) | |
| dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(34)); | |
| return 0; | |
| remove_sdhc: | |
| pm_runtime_disable(&pdev->dev); | |
| pm_runtime_put_noidle(&pdev->dev); | |
| xenon_sdhc_unprepare(host); | |
| err_clk_axi: | |
| clk_disable_unprepare(priv->axi_clk); | |
| err_clk: | |
| clk_disable_unprepare(pltfm_host->clk); | |
| return err; | |
| } | |
| static void xenon_remove(struct platform_device *pdev) | |
| { | |
| struct sdhci_host *host = platform_get_drvdata(pdev); | |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); | |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); | |
| pm_runtime_get_sync(&pdev->dev); | |
| pm_runtime_disable(&pdev->dev); | |
| pm_runtime_put_noidle(&pdev->dev); | |
| sdhci_remove_host(host, 0); | |
| xenon_sdhc_unprepare(host); | |
| clk_disable_unprepare(priv->axi_clk); | |
| clk_disable_unprepare(pltfm_host->clk); | |
| } | |
| static int xenon_suspend(struct device *dev) | |
| { | |
| struct sdhci_host *host = dev_get_drvdata(dev); | |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); | |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); | |
| int ret; | |
| ret = pm_runtime_force_suspend(dev); | |
| priv->restore_needed = true; | |
| return ret; | |
| } | |
| static int xenon_runtime_suspend(struct device *dev) | |
| { | |
| struct sdhci_host *host = dev_get_drvdata(dev); | |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); | |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); | |
| sdhci_runtime_suspend_host(host); | |
| if (host->tuning_mode != SDHCI_TUNING_MODE_3) | |
| mmc_retune_needed(host->mmc); | |
| clk_disable_unprepare(pltfm_host->clk); | |
| /* | |
| * Need to update the priv->clock here, or when runtime resume | |
| * back, phy don't aware the clock change and won't adjust phy | |
| * which will cause cmd err | |
| */ | |
| priv->clock = 0; | |
| return 0; | |
| } | |
| static int xenon_runtime_resume(struct device *dev) | |
| { | |
| struct sdhci_host *host = dev_get_drvdata(dev); | |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); | |
| struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); | |
| int ret; | |
| ret = clk_prepare_enable(pltfm_host->clk); | |
| if (ret) { | |
| dev_err(dev, "can't enable mainck\n"); | |
| return ret; | |
| } | |
| if (priv->restore_needed) { | |
| ret = xenon_sdhc_prepare(host); | |
| if (ret) | |
| goto out; | |
| priv->restore_needed = false; | |
| } | |
| sdhci_runtime_resume_host(host, 0); | |
| return 0; | |
| out: | |
| clk_disable_unprepare(pltfm_host->clk); | |
| return ret; | |
| } | |
| static const struct dev_pm_ops sdhci_xenon_dev_pm_ops = { | |
| SYSTEM_SLEEP_PM_OPS(xenon_suspend, pm_runtime_force_resume) | |
| RUNTIME_PM_OPS(xenon_runtime_suspend, xenon_runtime_resume, NULL) | |
| }; | |
| static const struct of_device_id sdhci_xenon_dt_ids[] = { | |
| { .compatible = "marvell,armada-ap806-sdhci", .data = (void *)XENON_AP806}, | |
| { .compatible = "marvell,armada-ap807-sdhci", .data = (void *)XENON_AP807}, | |
| { .compatible = "marvell,armada-cp110-sdhci", .data = (void *)XENON_CP110}, | |
| { .compatible = "marvell,armada-3700-sdhci", .data = (void *)XENON_A3700}, | |
| { .compatible = "marvell,ac5-sdhci", .data = (void *)XENON_AC5}, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids); | |
| #ifdef CONFIG_ACPI | |
| static const struct acpi_device_id sdhci_xenon_acpi_ids[] = { | |
| { .id = "MRVL0002", XENON_AP806}, | |
| { .id = "MRVL0003", XENON_AP807}, | |
| { .id = "MRVL0004", XENON_CP110}, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(acpi, sdhci_xenon_acpi_ids); | |
| #endif | |
| static struct platform_driver sdhci_xenon_driver = { | |
| .driver = { | |
| .name = "xenon-sdhci", | |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, | |
| .of_match_table = sdhci_xenon_dt_ids, | |
| .acpi_match_table = ACPI_PTR(sdhci_xenon_acpi_ids), | |
| .pm = pm_ptr(&sdhci_xenon_dev_pm_ops), | |
| }, | |
| .probe = xenon_probe, | |
| .remove = xenon_remove, | |
| }; | |
| module_platform_driver(sdhci_xenon_driver); | |
| MODULE_DESCRIPTION("SDHCI platform driver for Marvell Xenon SDHC"); | |
| MODULE_AUTHOR("Hu Ziji <huziji@marvell.com>"); | |
| MODULE_LICENSE("GPL v2"); |