| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright 2021 Nicolas Saenz Julienne <nsaenzjulienne@suse.de> | |
| * For more information on Raspberry Pi's PoE hat see: | |
| * https://www.raspberrypi.org/products/poe-hat/ | |
| * | |
| * Limitations: | |
| * - No disable bit, so a disabled PWM is simulated by duty_cycle 0 | |
| * - Only normal polarity | |
| * - Fixed 12.5 kHz period | |
| * | |
| * The current period is completed when HW is reconfigured. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/pwm.h> | |
| #include <soc/bcm2835/raspberrypi-firmware.h> | |
| #include <dt-bindings/pwm/raspberrypi,firmware-poe-pwm.h> | |
| #define RPI_PWM_MAX_DUTY 255 | |
| #define RPI_PWM_PERIOD_NS 80000 /* 12.5 kHz */ | |
| #define RPI_PWM_CUR_DUTY_REG 0x0 | |
| struct raspberrypi_pwm { | |
| struct rpi_firmware *firmware; | |
| unsigned int duty_cycle; | |
| }; | |
| struct raspberrypi_pwm_prop { | |
| __le32 reg; | |
| __le32 val; | |
| __le32 ret; | |
| } __packed; | |
| static inline | |
| struct raspberrypi_pwm *raspberrypi_pwm_from_chip(struct pwm_chip *chip) | |
| { | |
| return pwmchip_get_drvdata(chip); | |
| } | |
| static int raspberrypi_pwm_set_property(struct rpi_firmware *firmware, | |
| u32 reg, u32 val) | |
| { | |
| struct raspberrypi_pwm_prop msg = { | |
| .reg = cpu_to_le32(reg), | |
| .val = cpu_to_le32(val), | |
| }; | |
| int ret; | |
| ret = rpi_firmware_property(firmware, RPI_FIRMWARE_SET_POE_HAT_VAL, | |
| &msg, sizeof(msg)); | |
| if (ret) | |
| return ret; | |
| if (msg.ret) | |
| return -EIO; | |
| return 0; | |
| } | |
| static int raspberrypi_pwm_get_property(struct rpi_firmware *firmware, | |
| u32 reg, u32 *val) | |
| { | |
| struct raspberrypi_pwm_prop msg = { | |
| .reg = cpu_to_le32(reg), | |
| }; | |
| int ret; | |
| ret = rpi_firmware_property(firmware, RPI_FIRMWARE_GET_POE_HAT_VAL, | |
| &msg, sizeof(msg)); | |
| if (ret) | |
| return ret; | |
| if (msg.ret) | |
| return -EIO; | |
| *val = le32_to_cpu(msg.val); | |
| return 0; | |
| } | |
| static int raspberrypi_pwm_get_state(struct pwm_chip *chip, | |
| struct pwm_device *pwm, | |
| struct pwm_state *state) | |
| { | |
| struct raspberrypi_pwm *rpipwm = raspberrypi_pwm_from_chip(chip); | |
| state->period = RPI_PWM_PERIOD_NS; | |
| state->duty_cycle = DIV_ROUND_UP(rpipwm->duty_cycle * RPI_PWM_PERIOD_NS, | |
| RPI_PWM_MAX_DUTY); | |
| state->enabled = !!(rpipwm->duty_cycle); | |
| state->polarity = PWM_POLARITY_NORMAL; | |
| return 0; | |
| } | |
| static int raspberrypi_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, | |
| const struct pwm_state *state) | |
| { | |
| struct raspberrypi_pwm *rpipwm = raspberrypi_pwm_from_chip(chip); | |
| unsigned int duty_cycle; | |
| int ret; | |
| if (state->period < RPI_PWM_PERIOD_NS || | |
| state->polarity != PWM_POLARITY_NORMAL) | |
| return -EINVAL; | |
| if (!state->enabled) | |
| duty_cycle = 0; | |
| else if (state->duty_cycle < RPI_PWM_PERIOD_NS) | |
| duty_cycle = DIV_ROUND_DOWN_ULL(state->duty_cycle * RPI_PWM_MAX_DUTY, | |
| RPI_PWM_PERIOD_NS); | |
| else | |
| duty_cycle = RPI_PWM_MAX_DUTY; | |
| if (duty_cycle == rpipwm->duty_cycle) | |
| return 0; | |
| ret = raspberrypi_pwm_set_property(rpipwm->firmware, RPI_PWM_CUR_DUTY_REG, | |
| duty_cycle); | |
| if (ret) { | |
| dev_err(pwmchip_parent(chip), "Failed to set duty cycle: %pe\n", | |
| ERR_PTR(ret)); | |
| return ret; | |
| } | |
| rpipwm->duty_cycle = duty_cycle; | |
| return 0; | |
| } | |
| static const struct pwm_ops raspberrypi_pwm_ops = { | |
| .get_state = raspberrypi_pwm_get_state, | |
| .apply = raspberrypi_pwm_apply, | |
| }; | |
| static int raspberrypi_pwm_probe(struct platform_device *pdev) | |
| { | |
| struct device_node *firmware_node; | |
| struct device *dev = &pdev->dev; | |
| struct rpi_firmware *firmware; | |
| struct pwm_chip *chip; | |
| struct raspberrypi_pwm *rpipwm; | |
| int ret; | |
| firmware_node = of_get_parent(dev->of_node); | |
| if (!firmware_node) { | |
| dev_err(dev, "Missing firmware node\n"); | |
| return -ENOENT; | |
| } | |
| firmware = devm_rpi_firmware_get(&pdev->dev, firmware_node); | |
| of_node_put(firmware_node); | |
| if (!firmware) | |
| return dev_err_probe(dev, -EPROBE_DEFER, | |
| "Failed to get firmware handle\n"); | |
| chip = devm_pwmchip_alloc(&pdev->dev, RASPBERRYPI_FIRMWARE_PWM_NUM, | |
| sizeof(*rpipwm)); | |
| if (IS_ERR(chip)) | |
| return PTR_ERR(chip); | |
| rpipwm = raspberrypi_pwm_from_chip(chip); | |
| rpipwm->firmware = firmware; | |
| chip->ops = &raspberrypi_pwm_ops; | |
| ret = raspberrypi_pwm_get_property(rpipwm->firmware, RPI_PWM_CUR_DUTY_REG, | |
| &rpipwm->duty_cycle); | |
| if (ret) { | |
| dev_err(dev, "Failed to get duty cycle: %pe\n", ERR_PTR(ret)); | |
| return ret; | |
| } | |
| return devm_pwmchip_add(dev, chip); | |
| } | |
| static const struct of_device_id raspberrypi_pwm_of_match[] = { | |
| { .compatible = "raspberrypi,firmware-poe-pwm" }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, raspberrypi_pwm_of_match); | |
| static struct platform_driver raspberrypi_pwm_driver = { | |
| .driver = { | |
| .name = "raspberrypi-poe-pwm", | |
| .of_match_table = raspberrypi_pwm_of_match, | |
| }, | |
| .probe = raspberrypi_pwm_probe, | |
| }; | |
| module_platform_driver(raspberrypi_pwm_driver); | |
| MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de>"); | |
| MODULE_DESCRIPTION("Raspberry Pi Firmware Based PWM Bus Driver"); | |
| MODULE_LICENSE("GPL v2"); |