| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Toshiba Visconti pulse-width-modulation controller driver | |
| * | |
| * Copyright (c) 2020 - 2021 TOSHIBA CORPORATION | |
| * Copyright (c) 2020 - 2021 Toshiba Electronic Devices & Storage Corporation | |
| * | |
| * Authors: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> | |
| * | |
| * Limitations: | |
| * - The fixed input clock is running at 1 MHz and is divided by either 1, | |
| * 2, 4 or 8. | |
| * - When the settings of the PWM are modified, the new values are shadowed | |
| * in hardware until the PIPGM_PCSR register is written and the currently | |
| * running period is completed. This way the hardware switches atomically | |
| * from the old setting to the new. | |
| * - Disabling the hardware completes the currently running period and keeps | |
| * the output at low level at all times. | |
| */ | |
| #include <linux/err.h> | |
| #include <linux/io.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/pwm.h> | |
| #define PIPGM_PCSR(ch) (0x400 + 4 * (ch)) | |
| #define PIPGM_PDUT(ch) (0x420 + 4 * (ch)) | |
| #define PIPGM_PWMC(ch) (0x440 + 4 * (ch)) | |
| #define PIPGM_PWMC_PWMACT BIT(5) | |
| #define PIPGM_PWMC_CLK_MASK GENMASK(1, 0) | |
| #define PIPGM_PWMC_POLARITY_MASK GENMASK(5, 5) | |
| struct visconti_pwm_chip { | |
| void __iomem *base; | |
| }; | |
| static inline struct visconti_pwm_chip *visconti_pwm_from_chip(struct pwm_chip *chip) | |
| { | |
| return pwmchip_get_drvdata(chip); | |
| } | |
| static int visconti_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, | |
| const struct pwm_state *state) | |
| { | |
| struct visconti_pwm_chip *priv = visconti_pwm_from_chip(chip); | |
| u32 period, duty_cycle, pwmc0; | |
| if (!state->enabled) { | |
| writel(0, priv->base + PIPGM_PCSR(pwm->hwpwm)); | |
| return 0; | |
| } | |
| /* | |
| * The biggest period the hardware can provide is | |
| * (0xffff << 3) * 1000 ns | |
| * This value fits easily in an u32, so simplify the maths by | |
| * capping the values to 32 bit integers. | |
| */ | |
| if (state->period > (0xffff << 3) * 1000) | |
| period = (0xffff << 3) * 1000; | |
| else | |
| period = state->period; | |
| if (state->duty_cycle > period) | |
| duty_cycle = period; | |
| else | |
| duty_cycle = state->duty_cycle; | |
| /* | |
| * The input clock runs fixed at 1 MHz, so we have only | |
| * microsecond resolution and so can divide by | |
| * NSEC_PER_SEC / CLKFREQ = 1000 without losing precision. | |
| */ | |
| period /= 1000; | |
| duty_cycle /= 1000; | |
| if (!period) | |
| return -ERANGE; | |
| /* | |
| * PWMC controls a divider that divides the input clk by a power of two | |
| * between 1 and 8. As a smaller divider yields higher precision, pick | |
| * the smallest possible one. As period is at most 0xffff << 3, pwmc0 is | |
| * in the intended range [0..3]. | |
| */ | |
| pwmc0 = fls(period >> 16); | |
| if (WARN_ON(pwmc0 > 3)) | |
| return -EINVAL; | |
| period >>= pwmc0; | |
| duty_cycle >>= pwmc0; | |
| if (state->polarity == PWM_POLARITY_INVERSED) | |
| pwmc0 |= PIPGM_PWMC_PWMACT; | |
| writel(pwmc0, priv->base + PIPGM_PWMC(pwm->hwpwm)); | |
| writel(duty_cycle, priv->base + PIPGM_PDUT(pwm->hwpwm)); | |
| writel(period, priv->base + PIPGM_PCSR(pwm->hwpwm)); | |
| return 0; | |
| } | |
| static int visconti_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm, | |
| struct pwm_state *state) | |
| { | |
| struct visconti_pwm_chip *priv = visconti_pwm_from_chip(chip); | |
| u32 period, duty, pwmc0, pwmc0_clk; | |
| period = readl(priv->base + PIPGM_PCSR(pwm->hwpwm)); | |
| duty = readl(priv->base + PIPGM_PDUT(pwm->hwpwm)); | |
| pwmc0 = readl(priv->base + PIPGM_PWMC(pwm->hwpwm)); | |
| pwmc0_clk = pwmc0 & PIPGM_PWMC_CLK_MASK; | |
| state->period = (period << pwmc0_clk) * NSEC_PER_USEC; | |
| state->duty_cycle = (duty << pwmc0_clk) * NSEC_PER_USEC; | |
| if (pwmc0 & PIPGM_PWMC_POLARITY_MASK) | |
| state->polarity = PWM_POLARITY_INVERSED; | |
| else | |
| state->polarity = PWM_POLARITY_NORMAL; | |
| state->enabled = true; | |
| return 0; | |
| } | |
| static const struct pwm_ops visconti_pwm_ops = { | |
| .apply = visconti_pwm_apply, | |
| .get_state = visconti_pwm_get_state, | |
| }; | |
| static int visconti_pwm_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct pwm_chip *chip; | |
| struct visconti_pwm_chip *priv; | |
| int ret; | |
| chip = devm_pwmchip_alloc(dev, 4, sizeof(*priv)); | |
| if (IS_ERR(chip)) | |
| return PTR_ERR(chip); | |
| priv = visconti_pwm_from_chip(chip); | |
| priv->base = devm_platform_ioremap_resource(pdev, 0); | |
| if (IS_ERR(priv->base)) | |
| return PTR_ERR(priv->base); | |
| chip->ops = &visconti_pwm_ops; | |
| ret = devm_pwmchip_add(&pdev->dev, chip); | |
| if (ret < 0) | |
| return dev_err_probe(&pdev->dev, ret, "Cannot register visconti PWM\n"); | |
| return 0; | |
| } | |
| static const struct of_device_id visconti_pwm_of_match[] = { | |
| { .compatible = "toshiba,visconti-pwm" }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, visconti_pwm_of_match); | |
| static struct platform_driver visconti_pwm_driver = { | |
| .driver = { | |
| .name = "pwm-visconti", | |
| .of_match_table = visconti_pwm_of_match, | |
| }, | |
| .probe = visconti_pwm_probe, | |
| }; | |
| module_platform_driver(visconti_pwm_driver); | |
| MODULE_DESCRIPTION("Toshiba Visconti Pulse Width Modulator driver"); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_AUTHOR("Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>"); | |
| MODULE_ALIAS("platform:pwm-visconti"); |