| // SPDX-License-Identifier: GPL-2.0 | |
| #include <linux/bits.h> | |
| #include <linux/bitfield.h> | |
| #include <linux/delay.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/i2c.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/regmap.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <sound/pcm.h> | |
| #include <sound/pcm_params.h> | |
| #include <sound/soc.h> | |
| #include <sound/tlv.h> | |
| #define RT9120_REG_DEVID 0x00 | |
| #define RT9120_REG_I2SFMT 0x02 | |
| #define RT9120_REG_I2SWL 0x03 | |
| #define RT9120_REG_SDIOSEL 0x04 | |
| #define RT9120_REG_SYSCTL 0x05 | |
| #define RT9120_REG_SPKGAIN 0x07 | |
| #define RT9120_REG_VOLRAMP 0x0A | |
| #define RT9120_REG_ERRRPT 0x10 | |
| #define RT9120_REG_MSVOL 0x20 | |
| #define RT9120_REG_SWRESET 0x40 | |
| #define RT9120_REG_INTERCFG 0x63 | |
| #define RT9120_REG_INTERNAL0 0x65 | |
| #define RT9120_REG_INTERNAL1 0x69 | |
| #define RT9120_REG_UVPOPT 0x6C | |
| #define RT9120_REG_DIGCFG 0xF8 | |
| #define RT9120_VID_MASK GENMASK(15, 8) | |
| #define RT9120_SWRST_MASK BIT(7) | |
| #define RT9120_MUTE_MASK GENMASK(5, 4) | |
| #define RT9120_I2SFMT_MASK GENMASK(4, 2) | |
| #define RT9120_I2SFMT_SHIFT 2 | |
| #define RT9120_CFG_FMT_I2S 0 | |
| #define RT9120_CFG_FMT_LEFTJ 1 | |
| #define RT9120_CFG_FMT_RIGHTJ 2 | |
| #define RT9120_CFG_FMT_DSPA 3 | |
| #define RT9120_CFG_FMT_DSPB 7 | |
| #define RT9120_AUDBIT_MASK GENMASK(1, 0) | |
| #define RT9120_CFG_AUDBIT_16 0 | |
| #define RT9120_CFG_AUDBIT_20 1 | |
| #define RT9120_CFG_AUDBIT_24 2 | |
| #define RT9120_AUDWL_MASK GENMASK(5, 0) | |
| #define RT9120_CFG_WORDLEN_16 16 | |
| #define RT9120_CFG_WORDLEN_24 24 | |
| #define RT9120_CFG_WORDLEN_32 32 | |
| #define RT9120_DVDD_UVSEL_MASK GENMASK(5, 4) | |
| #define RT9120_AUTOSYNC_MASK BIT(6) | |
| #define RT9120_VENDOR_ID 0x42 | |
| #define RT9120S_VENDOR_ID 0x43 | |
| #define RT9120_RESET_WAITMS 20 | |
| #define RT9120_CHIPON_WAITMS 20 | |
| #define RT9120_AMPON_WAITMS 50 | |
| #define RT9120_AMPOFF_WAITMS 100 | |
| #define RT9120_LVAPP_THRESUV 2000000 | |
| /* 8000 to 192000 supported , only 176400 not support */ | |
| #define RT9120_RATES_MASK (SNDRV_PCM_RATE_8000_192000 &\ | |
| ~SNDRV_PCM_RATE_176400) | |
| #define RT9120_FMTS_MASK (SNDRV_PCM_FMTBIT_S16_LE |\ | |
| SNDRV_PCM_FMTBIT_S24_LE |\ | |
| SNDRV_PCM_FMTBIT_S32_LE) | |
| enum { | |
| CHIP_IDX_RT9120 = 0, | |
| CHIP_IDX_RT9120S, | |
| CHIP_IDX_MAX | |
| }; | |
| struct rt9120_data { | |
| struct device *dev; | |
| struct regmap *regmap; | |
| struct gpio_desc *pwdnn_gpio; | |
| int chip_idx; | |
| }; | |
| /* 11bit [min,max,step] = [-103.9375dB, 24dB, 0.0625dB] */ | |
| static const DECLARE_TLV_DB_SCALE(digital_tlv, -1039375, 625, 1); | |
| /* {6, 8, 10, 12, 13, 14, 15, 16}dB */ | |
| static const DECLARE_TLV_DB_RANGE(classd_tlv, | |
| 0, 3, TLV_DB_SCALE_ITEM(600, 200, 0), | |
| 4, 7, TLV_DB_SCALE_ITEM(1300, 100, 0) | |
| ); | |
| static const char * const sdo_select_text[] = { | |
| "None", "INTF", "Final", "RMS Detect" | |
| }; | |
| static const struct soc_enum sdo_select_enum = | |
| SOC_ENUM_SINGLE(RT9120_REG_SDIOSEL, 4, ARRAY_SIZE(sdo_select_text), | |
| sdo_select_text); | |
| static const struct snd_kcontrol_new rt9120_snd_controls[] = { | |
| SOC_SINGLE_TLV("MS Volume", RT9120_REG_MSVOL, 0, 2047, 1, digital_tlv), | |
| SOC_SINGLE_TLV("SPK Gain Volume", RT9120_REG_SPKGAIN, 0, 7, 0, classd_tlv), | |
| SOC_SINGLE("PBTL Switch", RT9120_REG_SYSCTL, 3, 1, 0), | |
| SOC_ENUM("SDO Select", sdo_select_enum), | |
| }; | |
| static int internal_power_event(struct snd_soc_dapm_widget *w, | |
| struct snd_kcontrol *kcontrol, int event) | |
| { | |
| struct snd_soc_component *comp = snd_soc_dapm_to_component(w->dapm); | |
| switch (event) { | |
| case SND_SOC_DAPM_PRE_PMU: | |
| snd_soc_component_write(comp, RT9120_REG_ERRRPT, 0); | |
| break; | |
| case SND_SOC_DAPM_POST_PMU: | |
| msleep(RT9120_AMPON_WAITMS); | |
| break; | |
| case SND_SOC_DAPM_POST_PMD: | |
| msleep(RT9120_AMPOFF_WAITMS); | |
| break; | |
| default: | |
| break; | |
| } | |
| return 0; | |
| } | |
| static const struct snd_soc_dapm_widget rt9120_dapm_widgets[] = { | |
| SND_SOC_DAPM_MIXER("DMIX", SND_SOC_NOPM, 0, 0, NULL, 0), | |
| SND_SOC_DAPM_DAC("LDAC", NULL, SND_SOC_NOPM, 0, 0), | |
| SND_SOC_DAPM_DAC("RDAC", NULL, SND_SOC_NOPM, 0, 0), | |
| SND_SOC_DAPM_SUPPLY("PWND", RT9120_REG_SYSCTL, 6, 1, | |
| internal_power_event, SND_SOC_DAPM_PRE_PMU | | |
| SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), | |
| SND_SOC_DAPM_PGA("SPKL PA", SND_SOC_NOPM, 0, 0, NULL, 0), | |
| SND_SOC_DAPM_PGA("SPKR PA", SND_SOC_NOPM, 0, 0, NULL, 0), | |
| SND_SOC_DAPM_OUTPUT("SPKL"), | |
| SND_SOC_DAPM_OUTPUT("SPKR"), | |
| }; | |
| static const struct snd_soc_dapm_route rt9120_dapm_routes[] = { | |
| { "DMIX", NULL, "AIF Playback" }, | |
| /* SPKL */ | |
| { "LDAC", NULL, "PWND" }, | |
| { "LDAC", NULL, "DMIX" }, | |
| { "SPKL PA", NULL, "LDAC" }, | |
| { "SPKL", NULL, "SPKL PA" }, | |
| /* SPKR */ | |
| { "RDAC", NULL, "PWND" }, | |
| { "RDAC", NULL, "DMIX" }, | |
| { "SPKR PA", NULL, "RDAC" }, | |
| { "SPKR", NULL, "SPKR PA" }, | |
| /* Cap */ | |
| { "AIF Capture", NULL, "LDAC" }, | |
| { "AIF Capture", NULL, "RDAC" }, | |
| }; | |
| static int rt9120_codec_probe(struct snd_soc_component *comp) | |
| { | |
| struct rt9120_data *data = snd_soc_component_get_drvdata(comp); | |
| snd_soc_component_init_regmap(comp, data->regmap); | |
| pm_runtime_get_sync(comp->dev); | |
| /* Internal setting */ | |
| if (data->chip_idx == CHIP_IDX_RT9120S) { | |
| snd_soc_component_write(comp, RT9120_REG_INTERCFG, 0xde); | |
| snd_soc_component_write(comp, RT9120_REG_INTERNAL0, 0x66); | |
| } else | |
| snd_soc_component_write(comp, RT9120_REG_INTERNAL0, 0x04); | |
| pm_runtime_mark_last_busy(comp->dev); | |
| pm_runtime_put(comp->dev); | |
| return 0; | |
| } | |
| static int rt9120_codec_suspend(struct snd_soc_component *comp) | |
| { | |
| return pm_runtime_force_suspend(comp->dev); | |
| } | |
| static int rt9120_codec_resume(struct snd_soc_component *comp) | |
| { | |
| return pm_runtime_force_resume(comp->dev); | |
| } | |
| static const struct snd_soc_component_driver rt9120_component_driver = { | |
| .probe = rt9120_codec_probe, | |
| .suspend = rt9120_codec_suspend, | |
| .resume = rt9120_codec_resume, | |
| .controls = rt9120_snd_controls, | |
| .num_controls = ARRAY_SIZE(rt9120_snd_controls), | |
| .dapm_widgets = rt9120_dapm_widgets, | |
| .num_dapm_widgets = ARRAY_SIZE(rt9120_dapm_widgets), | |
| .dapm_routes = rt9120_dapm_routes, | |
| .num_dapm_routes = ARRAY_SIZE(rt9120_dapm_routes), | |
| .endianness = 1, | |
| }; | |
| static int rt9120_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) | |
| { | |
| struct snd_soc_component *comp = dai->component; | |
| unsigned int format; | |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { | |
| case SND_SOC_DAIFMT_I2S: | |
| format = RT9120_CFG_FMT_I2S; | |
| break; | |
| case SND_SOC_DAIFMT_LEFT_J: | |
| format = RT9120_CFG_FMT_LEFTJ; | |
| break; | |
| case SND_SOC_DAIFMT_RIGHT_J: | |
| format = RT9120_CFG_FMT_RIGHTJ; | |
| break; | |
| case SND_SOC_DAIFMT_DSP_A: | |
| format = RT9120_CFG_FMT_DSPA; | |
| break; | |
| case SND_SOC_DAIFMT_DSP_B: | |
| format = RT9120_CFG_FMT_DSPB; | |
| break; | |
| default: | |
| dev_err(dai->dev, "Unknown dai format\n"); | |
| return -EINVAL; | |
| } | |
| snd_soc_component_update_bits(comp, RT9120_REG_I2SFMT, | |
| RT9120_I2SFMT_MASK, | |
| format << RT9120_I2SFMT_SHIFT); | |
| return 0; | |
| } | |
| static int rt9120_hw_params(struct snd_pcm_substream *substream, | |
| struct snd_pcm_hw_params *param, | |
| struct snd_soc_dai *dai) | |
| { | |
| struct snd_soc_component *comp = dai->component; | |
| unsigned int param_width, param_slot_width, auto_sync; | |
| int width, fs; | |
| switch (width = params_width(param)) { | |
| case 16: | |
| param_width = RT9120_CFG_AUDBIT_16; | |
| break; | |
| case 20: | |
| param_width = RT9120_CFG_AUDBIT_20; | |
| break; | |
| case 24: | |
| case 32: | |
| param_width = RT9120_CFG_AUDBIT_24; | |
| break; | |
| default: | |
| dev_err(dai->dev, "Unsupported data width [%d]\n", width); | |
| return -EINVAL; | |
| } | |
| snd_soc_component_update_bits(comp, RT9120_REG_I2SFMT, | |
| RT9120_AUDBIT_MASK, param_width); | |
| switch (width = params_physical_width(param)) { | |
| case 16: | |
| param_slot_width = RT9120_CFG_WORDLEN_16; | |
| break; | |
| case 24: | |
| param_slot_width = RT9120_CFG_WORDLEN_24; | |
| break; | |
| case 32: | |
| param_slot_width = RT9120_CFG_WORDLEN_32; | |
| break; | |
| default: | |
| dev_err(dai->dev, "Unsupported slot width [%d]\n", width); | |
| return -EINVAL; | |
| } | |
| snd_soc_component_update_bits(comp, RT9120_REG_I2SWL, | |
| RT9120_AUDWL_MASK, param_slot_width); | |
| fs = width * params_channels(param); | |
| /* If fs is divided by 48, disable auto sync */ | |
| if (fs % 48 == 0) | |
| auto_sync = 0; | |
| else | |
| auto_sync = RT9120_AUTOSYNC_MASK; | |
| snd_soc_component_update_bits(comp, RT9120_REG_DIGCFG, | |
| RT9120_AUTOSYNC_MASK, auto_sync); | |
| return 0; | |
| } | |
| static const struct snd_soc_dai_ops rt9120_dai_ops = { | |
| .set_fmt = rt9120_set_fmt, | |
| .hw_params = rt9120_hw_params, | |
| }; | |
| static struct snd_soc_dai_driver rt9120_dai = { | |
| .name = "rt9120_aif", | |
| .playback = { | |
| .stream_name = "AIF Playback", | |
| .rates = RT9120_RATES_MASK, | |
| .formats = RT9120_FMTS_MASK, | |
| .rate_max = 192000, | |
| .rate_min = 8000, | |
| .channels_min = 1, | |
| .channels_max = 2, | |
| }, | |
| .capture = { | |
| .stream_name = "AIF Capture", | |
| .rates = RT9120_RATES_MASK, | |
| .formats = RT9120_FMTS_MASK, | |
| .rate_max = 192000, | |
| .rate_min = 8000, | |
| .channels_min = 1, | |
| .channels_max = 2, | |
| }, | |
| .ops = &rt9120_dai_ops, | |
| .symmetric_rate = 1, | |
| .symmetric_sample_bits = 1, | |
| }; | |
| static const struct regmap_range rt9120_rd_yes_ranges[] = { | |
| regmap_reg_range(0x00, 0x0C), | |
| regmap_reg_range(0x10, 0x15), | |
| regmap_reg_range(0x20, 0x27), | |
| regmap_reg_range(0x30, 0x38), | |
| regmap_reg_range(0x3A, 0x40), | |
| regmap_reg_range(0x63, 0x63), | |
| regmap_reg_range(0x65, 0x65), | |
| regmap_reg_range(0x69, 0x69), | |
| regmap_reg_range(0x6C, 0x6C), | |
| regmap_reg_range(0xF8, 0xF8) | |
| }; | |
| static const struct regmap_access_table rt9120_rd_table = { | |
| .yes_ranges = rt9120_rd_yes_ranges, | |
| .n_yes_ranges = ARRAY_SIZE(rt9120_rd_yes_ranges), | |
| }; | |
| static const struct regmap_range rt9120_wr_yes_ranges[] = { | |
| regmap_reg_range(0x00, 0x00), | |
| regmap_reg_range(0x02, 0x0A), | |
| regmap_reg_range(0x10, 0x15), | |
| regmap_reg_range(0x20, 0x27), | |
| regmap_reg_range(0x30, 0x38), | |
| regmap_reg_range(0x3A, 0x3D), | |
| regmap_reg_range(0x40, 0x40), | |
| regmap_reg_range(0x63, 0x63), | |
| regmap_reg_range(0x65, 0x65), | |
| regmap_reg_range(0x69, 0x69), | |
| regmap_reg_range(0x6C, 0x6C), | |
| regmap_reg_range(0xF8, 0xF8) | |
| }; | |
| static const struct regmap_access_table rt9120_wr_table = { | |
| .yes_ranges = rt9120_wr_yes_ranges, | |
| .n_yes_ranges = ARRAY_SIZE(rt9120_wr_yes_ranges), | |
| }; | |
| static bool rt9120_volatile_reg(struct device *dev, unsigned int reg) | |
| { | |
| switch (reg) { | |
| case 0x00 ... 0x01: | |
| case 0x10: | |
| case 0x30 ... 0x40: | |
| return true; | |
| default: | |
| return false; | |
| } | |
| } | |
| static int rt9120_get_reg_size(unsigned int reg) | |
| { | |
| switch (reg) { | |
| case 0x00: | |
| case 0x20 ... 0x27: | |
| return 2; | |
| case 0x30 ... 0x3D: | |
| return 3; | |
| case 0x3E ... 0x3F: | |
| return 4; | |
| default: | |
| return 1; | |
| } | |
| } | |
| static int rt9120_reg_read(void *context, unsigned int reg, unsigned int *val) | |
| { | |
| struct rt9120_data *data = context; | |
| struct i2c_client *i2c = to_i2c_client(data->dev); | |
| int size = rt9120_get_reg_size(reg); | |
| u8 raw[4] = {0}; | |
| int ret; | |
| ret = i2c_smbus_read_i2c_block_data(i2c, reg, size, raw); | |
| if (ret < 0) | |
| return ret; | |
| else if (ret != size) | |
| return -EIO; | |
| switch (size) { | |
| case 4: | |
| *val = be32_to_cpup((__be32 *)raw); | |
| break; | |
| case 3: | |
| *val = raw[0] << 16 | raw[1] << 8 | raw[2]; | |
| break; | |
| case 2: | |
| *val = be16_to_cpup((__be16 *)raw); | |
| break; | |
| default: | |
| *val = raw[0]; | |
| } | |
| return 0; | |
| } | |
| static int rt9120_reg_write(void *context, unsigned int reg, unsigned int val) | |
| { | |
| struct rt9120_data *data = context; | |
| struct i2c_client *i2c = to_i2c_client(data->dev); | |
| int size = rt9120_get_reg_size(reg); | |
| __be32 be32_val; | |
| u8 *rawp = (u8 *)&be32_val; | |
| int offs = 4 - size; | |
| be32_val = cpu_to_be32(val); | |
| return i2c_smbus_write_i2c_block_data(i2c, reg, size, rawp + offs); | |
| } | |
| static const struct reg_default rt9120_reg_defaults[] = { | |
| { .reg = 0x02, .def = 0x02 }, | |
| { .reg = 0x03, .def = 0xf2 }, | |
| { .reg = 0x04, .def = 0x01 }, | |
| { .reg = 0x05, .def = 0xc0 }, | |
| { .reg = 0x06, .def = 0x28 }, | |
| { .reg = 0x07, .def = 0x04 }, | |
| { .reg = 0x08, .def = 0xff }, | |
| { .reg = 0x09, .def = 0x01 }, | |
| { .reg = 0x0a, .def = 0x01 }, | |
| { .reg = 0x0b, .def = 0x00 }, | |
| { .reg = 0x0c, .def = 0x04 }, | |
| { .reg = 0x11, .def = 0x30 }, | |
| { .reg = 0x12, .def = 0x08 }, | |
| { .reg = 0x13, .def = 0x12 }, | |
| { .reg = 0x14, .def = 0x09 }, | |
| { .reg = 0x15, .def = 0x00 }, | |
| { .reg = 0x20, .def = 0x7ff }, | |
| { .reg = 0x21, .def = 0x180 }, | |
| { .reg = 0x22, .def = 0x180 }, | |
| { .reg = 0x23, .def = 0x00 }, | |
| { .reg = 0x24, .def = 0x80 }, | |
| { .reg = 0x25, .def = 0x180 }, | |
| { .reg = 0x26, .def = 0x640 }, | |
| { .reg = 0x27, .def = 0x180 }, | |
| { .reg = 0x63, .def = 0x5e }, | |
| { .reg = 0x65, .def = 0x66 }, | |
| { .reg = 0x6c, .def = 0xe0 }, | |
| { .reg = 0xf8, .def = 0x44 }, | |
| }; | |
| static const struct regmap_config rt9120_regmap_config = { | |
| .reg_bits = 8, | |
| .val_bits = 32, | |
| .max_register = RT9120_REG_DIGCFG, | |
| .reg_defaults = rt9120_reg_defaults, | |
| .num_reg_defaults = ARRAY_SIZE(rt9120_reg_defaults), | |
| .cache_type = REGCACHE_RBTREE, | |
| .reg_read = rt9120_reg_read, | |
| .reg_write = rt9120_reg_write, | |
| .volatile_reg = rt9120_volatile_reg, | |
| .wr_table = &rt9120_wr_table, | |
| .rd_table = &rt9120_rd_table, | |
| }; | |
| static int rt9120_check_vendor_info(struct rt9120_data *data) | |
| { | |
| unsigned int devid; | |
| int ret; | |
| ret = regmap_read(data->regmap, RT9120_REG_DEVID, &devid); | |
| if (ret) | |
| return ret; | |
| devid = FIELD_GET(RT9120_VID_MASK, devid); | |
| switch (devid) { | |
| case RT9120_VENDOR_ID: | |
| data->chip_idx = CHIP_IDX_RT9120; | |
| break; | |
| case RT9120S_VENDOR_ID: | |
| data->chip_idx = CHIP_IDX_RT9120S; | |
| break; | |
| default: | |
| dev_err(data->dev, "DEVID not correct [0x%0x]\n", devid); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| static int rt9120_do_register_reset(struct rt9120_data *data) | |
| { | |
| int ret; | |
| ret = regmap_write(data->regmap, RT9120_REG_SWRESET, | |
| RT9120_SWRST_MASK); | |
| if (ret) | |
| return ret; | |
| msleep(RT9120_RESET_WAITMS); | |
| return 0; | |
| } | |
| static int rt9120_probe(struct i2c_client *i2c) | |
| { | |
| struct rt9120_data *data; | |
| struct regulator *dvdd_supply; | |
| int dvdd_supply_volt, ret; | |
| data = devm_kzalloc(&i2c->dev, sizeof(*data), GFP_KERNEL); | |
| if (!data) | |
| return -ENOMEM; | |
| data->dev = &i2c->dev; | |
| i2c_set_clientdata(i2c, data); | |
| data->pwdnn_gpio = devm_gpiod_get_optional(&i2c->dev, "pwdnn", | |
| GPIOD_OUT_HIGH); | |
| if (IS_ERR(data->pwdnn_gpio)) { | |
| dev_err(&i2c->dev, "Failed to initialize 'pwdnn' gpio\n"); | |
| return PTR_ERR(data->pwdnn_gpio); | |
| } else if (data->pwdnn_gpio) { | |
| dev_dbg(&i2c->dev, "'pwdnn' from low to high, wait chip on\n"); | |
| msleep(RT9120_CHIPON_WAITMS); | |
| } | |
| data->regmap = devm_regmap_init(&i2c->dev, NULL, data, | |
| &rt9120_regmap_config); | |
| if (IS_ERR(data->regmap)) { | |
| ret = PTR_ERR(data->regmap); | |
| dev_err(&i2c->dev, "Failed to init regmap [%d]\n", ret); | |
| return ret; | |
| } | |
| ret = rt9120_check_vendor_info(data); | |
| if (ret) { | |
| dev_err(&i2c->dev, "Failed to check vendor info\n"); | |
| return ret; | |
| } | |
| ret = rt9120_do_register_reset(data); | |
| if (ret) { | |
| dev_err(&i2c->dev, "Failed to do register reset\n"); | |
| return ret; | |
| } | |
| dvdd_supply = devm_regulator_get(&i2c->dev, "dvdd"); | |
| if (IS_ERR(dvdd_supply)) { | |
| dev_err(&i2c->dev, "No dvdd regulator found\n"); | |
| return PTR_ERR(dvdd_supply); | |
| } | |
| dvdd_supply_volt = regulator_get_voltage(dvdd_supply); | |
| if (dvdd_supply_volt <= RT9120_LVAPP_THRESUV) { | |
| dev_dbg(&i2c->dev, "dvdd low voltage design\n"); | |
| ret = regmap_update_bits(data->regmap, RT9120_REG_UVPOPT, | |
| RT9120_DVDD_UVSEL_MASK, 0); | |
| if (ret) { | |
| dev_err(&i2c->dev, "Failed to config dvdd uvsel\n"); | |
| return ret; | |
| } | |
| } | |
| pm_runtime_set_autosuspend_delay(&i2c->dev, 1000); | |
| pm_runtime_use_autosuspend(&i2c->dev); | |
| pm_runtime_set_active(&i2c->dev); | |
| pm_runtime_mark_last_busy(&i2c->dev); | |
| pm_runtime_enable(&i2c->dev); | |
| return devm_snd_soc_register_component(&i2c->dev, | |
| &rt9120_component_driver, | |
| &rt9120_dai, 1); | |
| } | |
| static void rt9120_remove(struct i2c_client *i2c) | |
| { | |
| pm_runtime_disable(&i2c->dev); | |
| pm_runtime_set_suspended(&i2c->dev); | |
| } | |
| static int rt9120_runtime_suspend(struct device *dev) | |
| { | |
| struct rt9120_data *data = dev_get_drvdata(dev); | |
| if (data->pwdnn_gpio) { | |
| regcache_cache_only(data->regmap, true); | |
| regcache_mark_dirty(data->regmap); | |
| gpiod_set_value(data->pwdnn_gpio, 0); | |
| } | |
| return 0; | |
| } | |
| static int rt9120_runtime_resume(struct device *dev) | |
| { | |
| struct rt9120_data *data = dev_get_drvdata(dev); | |
| int ret; | |
| if (data->pwdnn_gpio) { | |
| gpiod_set_value(data->pwdnn_gpio, 1); | |
| msleep(RT9120_CHIPON_WAITMS); | |
| regcache_cache_only(data->regmap, false); | |
| ret = regcache_sync(data->regmap); | |
| if (ret) { | |
| regcache_cache_only(data->regmap, true); | |
| regcache_mark_dirty(data->regmap); | |
| gpiod_set_value(data->pwdnn_gpio, 0); | |
| return ret; | |
| } | |
| } | |
| return 0; | |
| } | |
| static const struct dev_pm_ops rt9120_pm_ops = { | |
| RUNTIME_PM_OPS(rt9120_runtime_suspend, rt9120_runtime_resume, NULL) | |
| }; | |
| static const struct of_device_id __maybe_unused rt9120_device_table[] = { | |
| { .compatible = "richtek,rt9120", }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, rt9120_device_table); | |
| static struct i2c_driver rt9120_driver = { | |
| .driver = { | |
| .name = "rt9120", | |
| .of_match_table = rt9120_device_table, | |
| .pm = pm_ptr(&rt9120_pm_ops), | |
| }, | |
| .probe = rt9120_probe, | |
| .remove = rt9120_remove, | |
| }; | |
| module_i2c_driver(rt9120_driver); | |
| MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>"); | |
| MODULE_DESCRIPTION("RT9120 Audio Amplifier Driver"); | |
| MODULE_LICENSE("GPL"); |