| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Marvell Armada 370/XP SoC timer handling. | |
| * | |
| * Copyright (C) 2012 Marvell | |
| * | |
| * Lior Amsalem <alior@marvell.com> | |
| * Gregory CLEMENT <gregory.clement@free-electrons.com> | |
| * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> | |
| * | |
| * Timer 0 is used as free-running clocksource, while timer 1 is | |
| * used as clock_event_device. | |
| * | |
| * --- | |
| * Clocksource driver for Armada 370 and Armada XP SoC. | |
| * This driver implements one compatible string for each SoC, given | |
| * each has its own characteristics: | |
| * | |
| * * Armada 370 has no 25 MHz fixed timer. | |
| * | |
| * * Armada XP cannot work properly without such 25 MHz fixed timer as | |
| * doing otherwise leads to using a clocksource whose frequency varies | |
| * when doing cpufreq frequency changes. | |
| * | |
| * See Documentation/devicetree/bindings/timer/marvell,armada-370-timer.yaml | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/kernel.h> | |
| #include <linux/clk.h> | |
| #include <linux/cpu.h> | |
| #include <linux/timer.h> | |
| #include <linux/clockchips.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/of.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/of_address.h> | |
| #include <linux/irq.h> | |
| #include <linux/module.h> | |
| #include <linux/sched_clock.h> | |
| #include <linux/percpu.h> | |
| #include <linux/syscore_ops.h> | |
| #include <asm/delay.h> | |
| /* | |
| * Timer block registers. | |
| */ | |
| #define TIMER_CTRL_OFF 0x0000 | |
| #define TIMER0_EN BIT(0) | |
| #define TIMER0_RELOAD_EN BIT(1) | |
| #define TIMER0_25MHZ BIT(11) | |
| #define TIMER0_DIV(div) ((div) << 19) | |
| #define TIMER1_EN BIT(2) | |
| #define TIMER1_RELOAD_EN BIT(3) | |
| #define TIMER1_25MHZ BIT(12) | |
| #define TIMER1_DIV(div) ((div) << 22) | |
| #define TIMER_EVENTS_STATUS 0x0004 | |
| #define TIMER0_CLR_MASK (~0x1) | |
| #define TIMER1_CLR_MASK (~0x100) | |
| #define TIMER0_RELOAD_OFF 0x0010 | |
| #define TIMER0_VAL_OFF 0x0014 | |
| #define TIMER1_RELOAD_OFF 0x0018 | |
| #define TIMER1_VAL_OFF 0x001c | |
| #define LCL_TIMER_EVENTS_STATUS 0x0028 | |
| /* Global timers are connected to the coherency fabric clock, and the | |
| below divider reduces their incrementing frequency. */ | |
| #define TIMER_DIVIDER_SHIFT 5 | |
| #define TIMER_DIVIDER (1 << TIMER_DIVIDER_SHIFT) | |
| /* | |
| * SoC-specific data. | |
| */ | |
| static void __iomem *timer_base, *local_base; | |
| static unsigned int timer_clk; | |
| static bool timer25Mhz = true; | |
| static u32 enable_mask; | |
| /* | |
| * Number of timer ticks per jiffy. | |
| */ | |
| static u32 ticks_per_jiffy; | |
| static struct clock_event_device __percpu *armada_370_xp_evt; | |
| static void local_timer_ctrl_clrset(u32 clr, u32 set) | |
| { | |
| writel((readl(local_base + TIMER_CTRL_OFF) & ~clr) | set, | |
| local_base + TIMER_CTRL_OFF); | |
| } | |
| static u64 notrace armada_370_xp_read_sched_clock(void) | |
| { | |
| return ~readl(timer_base + TIMER0_VAL_OFF); | |
| } | |
| /* | |
| * Clockevent handling. | |
| */ | |
| static int | |
| armada_370_xp_clkevt_next_event(unsigned long delta, | |
| struct clock_event_device *dev) | |
| { | |
| /* | |
| * Clear clockevent timer interrupt. | |
| */ | |
| writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS); | |
| /* | |
| * Setup new clockevent timer value. | |
| */ | |
| writel(delta, local_base + TIMER0_VAL_OFF); | |
| /* | |
| * Enable the timer. | |
| */ | |
| local_timer_ctrl_clrset(TIMER0_RELOAD_EN, enable_mask); | |
| return 0; | |
| } | |
| static int armada_370_xp_clkevt_shutdown(struct clock_event_device *evt) | |
| { | |
| /* | |
| * Disable timer. | |
| */ | |
| local_timer_ctrl_clrset(TIMER0_EN, 0); | |
| /* | |
| * ACK pending timer interrupt. | |
| */ | |
| writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS); | |
| return 0; | |
| } | |
| static int armada_370_xp_clkevt_set_periodic(struct clock_event_device *evt) | |
| { | |
| /* | |
| * Setup timer to fire at 1/HZ intervals. | |
| */ | |
| writel(ticks_per_jiffy - 1, local_base + TIMER0_RELOAD_OFF); | |
| writel(ticks_per_jiffy - 1, local_base + TIMER0_VAL_OFF); | |
| /* | |
| * Enable timer. | |
| */ | |
| local_timer_ctrl_clrset(0, TIMER0_RELOAD_EN | enable_mask); | |
| return 0; | |
| } | |
| static int armada_370_xp_clkevt_irq; | |
| static irqreturn_t armada_370_xp_timer_interrupt(int irq, void *dev_id) | |
| { | |
| /* | |
| * ACK timer interrupt and call event handler. | |
| */ | |
| struct clock_event_device *evt = dev_id; | |
| writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS); | |
| evt->event_handler(evt); | |
| return IRQ_HANDLED; | |
| } | |
| /* | |
| * Setup the local clock events for a CPU. | |
| */ | |
| static int armada_370_xp_timer_starting_cpu(unsigned int cpu) | |
| { | |
| struct clock_event_device *evt = per_cpu_ptr(armada_370_xp_evt, cpu); | |
| u32 clr = 0, set = 0; | |
| if (timer25Mhz) | |
| set = TIMER0_25MHZ; | |
| else | |
| clr = TIMER0_25MHZ; | |
| local_timer_ctrl_clrset(clr, set); | |
| evt->name = "armada_370_xp_per_cpu_tick"; | |
| evt->features = CLOCK_EVT_FEAT_ONESHOT | | |
| CLOCK_EVT_FEAT_PERIODIC; | |
| evt->shift = 32; | |
| evt->rating = 300; | |
| evt->set_next_event = armada_370_xp_clkevt_next_event; | |
| evt->set_state_shutdown = armada_370_xp_clkevt_shutdown; | |
| evt->set_state_periodic = armada_370_xp_clkevt_set_periodic; | |
| evt->set_state_oneshot = armada_370_xp_clkevt_shutdown; | |
| evt->tick_resume = armada_370_xp_clkevt_shutdown; | |
| evt->irq = armada_370_xp_clkevt_irq; | |
| evt->cpumask = cpumask_of(cpu); | |
| clockevents_config_and_register(evt, timer_clk, 1, 0xfffffffe); | |
| enable_percpu_irq(evt->irq, 0); | |
| return 0; | |
| } | |
| static int armada_370_xp_timer_dying_cpu(unsigned int cpu) | |
| { | |
| struct clock_event_device *evt = per_cpu_ptr(armada_370_xp_evt, cpu); | |
| disable_percpu_irq(evt->irq); | |
| return 0; | |
| } | |
| static u32 timer0_ctrl_reg, timer0_local_ctrl_reg; | |
| static int armada_370_xp_timer_suspend(void *data) | |
| { | |
| timer0_ctrl_reg = readl(timer_base + TIMER_CTRL_OFF); | |
| timer0_local_ctrl_reg = readl(local_base + TIMER_CTRL_OFF); | |
| return 0; | |
| } | |
| static void armada_370_xp_timer_resume(void *data) | |
| { | |
| writel(0xffffffff, timer_base + TIMER0_VAL_OFF); | |
| writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF); | |
| writel(timer0_ctrl_reg, timer_base + TIMER_CTRL_OFF); | |
| writel(timer0_local_ctrl_reg, local_base + TIMER_CTRL_OFF); | |
| } | |
| static const struct syscore_ops armada_370_xp_timer_syscore_ops = { | |
| .suspend = armada_370_xp_timer_suspend, | |
| .resume = armada_370_xp_timer_resume, | |
| }; | |
| static struct syscore armada_370_xp_timer_syscore = { | |
| .ops = &armada_370_xp_timer_syscore_ops, | |
| }; | |
| static unsigned long armada_370_delay_timer_read(void) | |
| { | |
| return ~readl(timer_base + TIMER0_VAL_OFF); | |
| } | |
| static struct delay_timer armada_370_delay_timer = { | |
| .read_current_timer = armada_370_delay_timer_read, | |
| }; | |
| static int __init armada_370_xp_timer_common_init(struct device_node *np) | |
| { | |
| u32 clr = 0, set = 0; | |
| int res; | |
| timer_base = of_iomap(np, 0); | |
| if (!timer_base) { | |
| pr_err("Failed to iomap\n"); | |
| return -ENXIO; | |
| } | |
| local_base = of_iomap(np, 1); | |
| if (!local_base) { | |
| pr_err("Failed to iomap\n"); | |
| return -ENXIO; | |
| } | |
| if (timer25Mhz) { | |
| set = TIMER0_25MHZ; | |
| enable_mask = TIMER0_EN; | |
| } else { | |
| clr = TIMER0_25MHZ; | |
| enable_mask = TIMER0_EN | TIMER0_DIV(TIMER_DIVIDER_SHIFT); | |
| } | |
| atomic_io_modify(timer_base + TIMER_CTRL_OFF, clr | set, set); | |
| local_timer_ctrl_clrset(clr, set); | |
| /* | |
| * We use timer 0 as clocksource, and private(local) timer 0 | |
| * for clockevents | |
| */ | |
| armada_370_xp_clkevt_irq = irq_of_parse_and_map(np, 4); | |
| ticks_per_jiffy = (timer_clk + HZ / 2) / HZ; | |
| /* | |
| * Setup free-running clocksource timer (interrupts | |
| * disabled). | |
| */ | |
| writel(0xffffffff, timer_base + TIMER0_VAL_OFF); | |
| writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF); | |
| atomic_io_modify(timer_base + TIMER_CTRL_OFF, | |
| TIMER0_RELOAD_EN | enable_mask, | |
| TIMER0_RELOAD_EN | enable_mask); | |
| armada_370_delay_timer.freq = timer_clk; | |
| register_current_timer_delay(&armada_370_delay_timer); | |
| /* | |
| * Set scale and timer for sched_clock. | |
| */ | |
| sched_clock_register(armada_370_xp_read_sched_clock, 32, timer_clk); | |
| res = clocksource_mmio_init(timer_base + TIMER0_VAL_OFF, | |
| "armada_370_xp_clocksource", | |
| timer_clk, 300, 32, clocksource_mmio_readl_down); | |
| if (res) { | |
| pr_err("Failed to initialize clocksource mmio\n"); | |
| return res; | |
| } | |
| armada_370_xp_evt = alloc_percpu(struct clock_event_device); | |
| if (!armada_370_xp_evt) | |
| return -ENOMEM; | |
| /* | |
| * Setup clockevent timer (interrupt-driven). | |
| */ | |
| res = request_percpu_irq(armada_370_xp_clkevt_irq, | |
| armada_370_xp_timer_interrupt, | |
| "armada_370_xp_per_cpu_tick", | |
| armada_370_xp_evt); | |
| /* Immediately configure the timer on the boot CPU */ | |
| if (res) { | |
| pr_err("Failed to request percpu irq\n"); | |
| return res; | |
| } | |
| res = cpuhp_setup_state(CPUHP_AP_ARMADA_TIMER_STARTING, | |
| "clockevents/armada:starting", | |
| armada_370_xp_timer_starting_cpu, | |
| armada_370_xp_timer_dying_cpu); | |
| if (res) { | |
| pr_err("Failed to setup hotplug state and timer\n"); | |
| return res; | |
| } | |
| register_syscore(&armada_370_xp_timer_syscore); | |
| return 0; | |
| } | |
| static int __init armada_xp_timer_init(struct device_node *np) | |
| { | |
| struct clk *clk = of_clk_get_by_name(np, "fixed"); | |
| int ret; | |
| if (IS_ERR(clk)) { | |
| pr_err("Failed to get clock\n"); | |
| return PTR_ERR(clk); | |
| } | |
| ret = clk_prepare_enable(clk); | |
| if (ret) | |
| return ret; | |
| timer_clk = clk_get_rate(clk); | |
| ret = armada_370_xp_timer_common_init(np); | |
| if (ret) | |
| clk_disable_unprepare(clk); | |
| return ret; | |
| } | |
| TIMER_OF_DECLARE(armada_xp, "marvell,armada-xp-timer", | |
| armada_xp_timer_init); | |
| static int __init armada_375_timer_init(struct device_node *np) | |
| { | |
| struct clk *clk; | |
| int ret; | |
| clk = of_clk_get_by_name(np, "fixed"); | |
| if (!IS_ERR(clk)) { | |
| ret = clk_prepare_enable(clk); | |
| if (ret) | |
| return ret; | |
| timer_clk = clk_get_rate(clk); | |
| } else { | |
| /* | |
| * This fallback is required in order to retain proper | |
| * devicetree backwards compatibility. | |
| */ | |
| clk = of_clk_get(np, 0); | |
| /* Must have at least a clock */ | |
| if (IS_ERR(clk)) { | |
| pr_err("Failed to get clock\n"); | |
| return PTR_ERR(clk); | |
| } | |
| ret = clk_prepare_enable(clk); | |
| if (ret) | |
| return ret; | |
| timer_clk = clk_get_rate(clk) / TIMER_DIVIDER; | |
| timer25Mhz = false; | |
| } | |
| ret = armada_370_xp_timer_common_init(np); | |
| if (ret) | |
| clk_disable_unprepare(clk); | |
| return ret; | |
| } | |
| TIMER_OF_DECLARE(armada_375, "marvell,armada-375-timer", | |
| armada_375_timer_init); | |
| static int __init armada_370_timer_init(struct device_node *np) | |
| { | |
| struct clk *clk; | |
| int ret; | |
| clk = of_clk_get(np, 0); | |
| if (IS_ERR(clk)) { | |
| pr_err("Failed to get clock\n"); | |
| return PTR_ERR(clk); | |
| } | |
| ret = clk_prepare_enable(clk); | |
| if (ret) | |
| return ret; | |
| timer_clk = clk_get_rate(clk) / TIMER_DIVIDER; | |
| timer25Mhz = false; | |
| ret = armada_370_xp_timer_common_init(np); | |
| if (ret) | |
| clk_disable_unprepare(clk); | |
| return ret; | |
| } | |
| TIMER_OF_DECLARE(armada_370, "marvell,armada-370-timer", | |
| armada_370_timer_init); |