| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Qualcomm Peripheral Image Loader helpers | |
| * | |
| * Copyright (C) 2016 Linaro Ltd | |
| * Copyright (C) 2015 Sony Mobile Communications Inc | |
| * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. | |
| */ | |
| #include <linux/firmware.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/notifier.h> | |
| #include <linux/remoteproc.h> | |
| #include <linux/remoteproc/qcom_rproc.h> | |
| #include <linux/auxiliary_bus.h> | |
| #include <linux/rpmsg/qcom_glink.h> | |
| #include <linux/rpmsg/qcom_smd.h> | |
| #include <linux/slab.h> | |
| #include <linux/soc/qcom/mdt_loader.h> | |
| #include <linux/soc/qcom/smem.h> | |
| #include "remoteproc_internal.h" | |
| #include "qcom_common.h" | |
| #define to_glink_subdev(d) container_of(d, struct qcom_rproc_glink, subdev) | |
| #define to_smd_subdev(d) container_of(d, struct qcom_rproc_subdev, subdev) | |
| #define to_ssr_subdev(d) container_of(d, struct qcom_rproc_ssr, subdev) | |
| #define to_pdm_subdev(d) container_of(d, struct qcom_rproc_pdm, subdev) | |
| #define MAX_REGION_NAME_LENGTH 16 | |
| #define SBL_MINIDUMP_SMEM_ID 602 | |
| #define MINIDUMP_REGION_VALID ('V' << 24 | 'A' << 16 | 'L' << 8 | 'I' << 0) | |
| #define MINIDUMP_SS_ENCR_DONE ('D' << 24 | 'O' << 16 | 'N' << 8 | 'E' << 0) | |
| #define MINIDUMP_SS_ENABLED ('E' << 24 | 'N' << 16 | 'B' << 8 | 'L' << 0) | |
| /** | |
| * struct minidump_region - Minidump region | |
| * @name : Name of the region to be dumped | |
| * @seq_num: : Use to differentiate regions with same name. | |
| * @valid : This entry to be dumped (if set to 1) | |
| * @address : Physical address of region to be dumped | |
| * @size : Size of the region | |
| */ | |
| struct minidump_region { | |
| char name[MAX_REGION_NAME_LENGTH]; | |
| __le32 seq_num; | |
| __le32 valid; | |
| __le64 address; | |
| __le64 size; | |
| }; | |
| /** | |
| * struct minidump_subsystem - Subsystem's SMEM Table of content | |
| * @status : Subsystem toc init status | |
| * @enabled : if set to 1, this region would be copied during coredump | |
| * @encryption_status: Encryption status for this subsystem | |
| * @encryption_required : Decides to encrypt the subsystem regions or not | |
| * @region_count : Number of regions added in this subsystem toc | |
| * @regions_baseptr : regions base pointer of the subsystem | |
| */ | |
| struct minidump_subsystem { | |
| __le32 status; | |
| __le32 enabled; | |
| __le32 encryption_status; | |
| __le32 encryption_required; | |
| __le32 region_count; | |
| __le64 regions_baseptr; | |
| }; | |
| /** | |
| * struct minidump_global_toc - Global Table of Content | |
| * @status : Global Minidump init status | |
| * @md_revision : Minidump revision | |
| * @enabled : Minidump enable status | |
| * @subsystems : Array of subsystems toc | |
| */ | |
| struct minidump_global_toc { | |
| __le32 status; | |
| __le32 md_revision; | |
| __le32 enabled; | |
| struct minidump_subsystem subsystems[]; | |
| }; | |
| struct qcom_ssr_subsystem { | |
| const char *name; | |
| struct srcu_notifier_head notifier_list; | |
| struct list_head list; | |
| }; | |
| static LIST_HEAD(qcom_ssr_subsystem_list); | |
| static DEFINE_MUTEX(qcom_ssr_subsys_lock); | |
| static void qcom_minidump_cleanup(struct rproc *rproc) | |
| { | |
| struct rproc_dump_segment *entry, *tmp; | |
| list_for_each_entry_safe(entry, tmp, &rproc->dump_segments, node) { | |
| list_del(&entry->node); | |
| kfree(entry->priv); | |
| kfree(entry); | |
| } | |
| } | |
| static int qcom_add_minidump_segments(struct rproc *rproc, struct minidump_subsystem *subsystem, | |
| void (*rproc_dumpfn_t)(struct rproc *rproc, struct rproc_dump_segment *segment, | |
| void *dest, size_t offset, size_t size)) | |
| { | |
| struct minidump_region __iomem *ptr; | |
| struct minidump_region region; | |
| int seg_cnt, i; | |
| int ret = 0; | |
| dma_addr_t da; | |
| size_t size; | |
| char *name; | |
| if (WARN_ON(!list_empty(&rproc->dump_segments))) { | |
| dev_err(&rproc->dev, "dump segment list already populated\n"); | |
| return -EUCLEAN; | |
| } | |
| seg_cnt = le32_to_cpu(subsystem->region_count); | |
| ptr = ioremap((unsigned long)le64_to_cpu(subsystem->regions_baseptr), | |
| seg_cnt * sizeof(struct minidump_region)); | |
| if (!ptr) | |
| return -EFAULT; | |
| for (i = 0; i < seg_cnt; i++) { | |
| memcpy_fromio(®ion, ptr + i, sizeof(region)); | |
| if (le32_to_cpu(region.valid) == MINIDUMP_REGION_VALID) { | |
| name = kstrndup(region.name, MAX_REGION_NAME_LENGTH - 1, GFP_KERNEL); | |
| if (!name) { | |
| ret = -ENOMEM; | |
| break; | |
| } | |
| da = le64_to_cpu(region.address); | |
| size = le64_to_cpu(region.size); | |
| ret = rproc_coredump_add_custom_segment(rproc, da, size, rproc_dumpfn_t, | |
| name); | |
| if (ret) { | |
| kfree(name); | |
| break; | |
| } | |
| } | |
| } | |
| iounmap(ptr); | |
| return ret; | |
| } | |
| void qcom_minidump(struct rproc *rproc, unsigned int minidump_id, | |
| void (*rproc_dumpfn_t)(struct rproc *rproc, | |
| struct rproc_dump_segment *segment, void *dest, size_t offset, | |
| size_t size)) | |
| { | |
| int ret; | |
| struct minidump_subsystem *subsystem; | |
| struct minidump_global_toc *toc; | |
| unsigned int num_ss; | |
| size_t toc_size; | |
| /* Get Global minidump ToC*/ | |
| toc = qcom_smem_get(QCOM_SMEM_HOST_ANY, SBL_MINIDUMP_SMEM_ID, &toc_size); | |
| /* check if global table pointer exists and init is set */ | |
| if (IS_ERR(toc) || !toc->status) { | |
| dev_err(&rproc->dev, "Minidump TOC not found in SMEM\n"); | |
| return; | |
| } | |
| /* Derive the number of subsystems from the actual SMEM item size */ | |
| num_ss = (toc_size - offsetof(struct minidump_global_toc, subsystems)) / | |
| sizeof(struct minidump_subsystem); | |
| if (minidump_id >= num_ss) { | |
| dev_err(&rproc->dev, "Minidump id %d is out of range: %d\n", | |
| minidump_id, num_ss); | |
| return; | |
| } | |
| /* Get subsystem table of contents using the minidump id */ | |
| subsystem = &toc->subsystems[minidump_id]; | |
| /** | |
| * Collect minidump if SS ToC is valid and segment table | |
| * is initialized in memory and encryption status is set. | |
| */ | |
| if (subsystem->regions_baseptr == 0 || | |
| le32_to_cpu(subsystem->status) != 1 || | |
| le32_to_cpu(subsystem->enabled) != MINIDUMP_SS_ENABLED) { | |
| return rproc_coredump(rproc); | |
| } | |
| if (le32_to_cpu(subsystem->encryption_status) != MINIDUMP_SS_ENCR_DONE) { | |
| dev_err(&rproc->dev, "Minidump not ready, skipping\n"); | |
| return; | |
| } | |
| /** | |
| * Clear out the dump segments populated by parse_fw before | |
| * re-populating them with minidump segments. | |
| */ | |
| rproc_coredump_cleanup(rproc); | |
| ret = qcom_add_minidump_segments(rproc, subsystem, rproc_dumpfn_t); | |
| if (ret) { | |
| dev_err(&rproc->dev, "Failed with error: %d while adding minidump entries\n", ret); | |
| goto clean_minidump; | |
| } | |
| rproc_coredump_using_sections(rproc); | |
| clean_minidump: | |
| qcom_minidump_cleanup(rproc); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_minidump); | |
| static int glink_subdev_start(struct rproc_subdev *subdev) | |
| { | |
| struct qcom_rproc_glink *glink = to_glink_subdev(subdev); | |
| glink->edge = qcom_glink_smem_register(glink->dev, glink->node); | |
| return PTR_ERR_OR_ZERO(glink->edge); | |
| } | |
| static void glink_subdev_stop(struct rproc_subdev *subdev, bool crashed) | |
| { | |
| struct qcom_rproc_glink *glink = to_glink_subdev(subdev); | |
| qcom_glink_smem_unregister(glink->edge); | |
| glink->edge = NULL; | |
| } | |
| static void glink_subdev_unprepare(struct rproc_subdev *subdev) | |
| { | |
| struct qcom_rproc_glink *glink = to_glink_subdev(subdev); | |
| qcom_glink_ssr_notify(glink->ssr_name); | |
| } | |
| /** | |
| * qcom_add_glink_subdev() - try to add a GLINK subdevice to rproc | |
| * @rproc: rproc handle to parent the subdevice | |
| * @glink: reference to a GLINK subdev context | |
| * @ssr_name: identifier of the associated remoteproc for ssr notifications | |
| */ | |
| void qcom_add_glink_subdev(struct rproc *rproc, struct qcom_rproc_glink *glink, | |
| const char *ssr_name) | |
| { | |
| struct device *dev = &rproc->dev; | |
| glink->node = of_get_child_by_name(dev->parent->of_node, "glink-edge"); | |
| if (!glink->node) | |
| return; | |
| glink->ssr_name = kstrdup_const(ssr_name, GFP_KERNEL); | |
| if (!glink->ssr_name) { | |
| of_node_put(glink->node); | |
| return; | |
| } | |
| glink->dev = dev; | |
| glink->subdev.start = glink_subdev_start; | |
| glink->subdev.stop = glink_subdev_stop; | |
| glink->subdev.unprepare = glink_subdev_unprepare; | |
| rproc_add_subdev(rproc, &glink->subdev); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_add_glink_subdev); | |
| /** | |
| * qcom_remove_glink_subdev() - remove a GLINK subdevice from rproc | |
| * @rproc: rproc handle | |
| * @glink: reference to a GLINK subdev context | |
| */ | |
| void qcom_remove_glink_subdev(struct rproc *rproc, struct qcom_rproc_glink *glink) | |
| { | |
| if (!glink->node) | |
| return; | |
| rproc_remove_subdev(rproc, &glink->subdev); | |
| kfree_const(glink->ssr_name); | |
| of_node_put(glink->node); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_remove_glink_subdev); | |
| /** | |
| * qcom_register_dump_segments() - register segments for coredump | |
| * @rproc: remoteproc handle | |
| * @fw: firmware header | |
| * | |
| * Register all segments of the ELF in the remoteproc coredump segment list | |
| * | |
| * Return: 0 on success, negative errno on failure. | |
| */ | |
| int qcom_register_dump_segments(struct rproc *rproc, | |
| const struct firmware *fw) | |
| { | |
| const struct elf32_phdr *phdrs; | |
| const struct elf32_phdr *phdr; | |
| const struct elf32_hdr *ehdr; | |
| int ret; | |
| int i; | |
| ehdr = (struct elf32_hdr *)fw->data; | |
| phdrs = (struct elf32_phdr *)(ehdr + 1); | |
| for (i = 0; i < ehdr->e_phnum; i++) { | |
| phdr = &phdrs[i]; | |
| if (phdr->p_type != PT_LOAD) | |
| continue; | |
| if ((phdr->p_flags & QCOM_MDT_TYPE_MASK) == QCOM_MDT_TYPE_HASH) | |
| continue; | |
| if (!phdr->p_memsz) | |
| continue; | |
| ret = rproc_coredump_add_segment(rproc, phdr->p_paddr, | |
| phdr->p_memsz); | |
| if (ret) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_register_dump_segments); | |
| static int smd_subdev_start(struct rproc_subdev *subdev) | |
| { | |
| struct qcom_rproc_subdev *smd = to_smd_subdev(subdev); | |
| smd->edge = qcom_smd_register_edge(smd->dev, smd->node); | |
| return PTR_ERR_OR_ZERO(smd->edge); | |
| } | |
| static void smd_subdev_stop(struct rproc_subdev *subdev, bool crashed) | |
| { | |
| struct qcom_rproc_subdev *smd = to_smd_subdev(subdev); | |
| qcom_smd_unregister_edge(smd->edge); | |
| smd->edge = NULL; | |
| } | |
| /** | |
| * qcom_add_smd_subdev() - try to add a SMD subdevice to rproc | |
| * @rproc: rproc handle to parent the subdevice | |
| * @smd: reference to a Qualcomm subdev context | |
| */ | |
| void qcom_add_smd_subdev(struct rproc *rproc, struct qcom_rproc_subdev *smd) | |
| { | |
| struct device *dev = &rproc->dev; | |
| smd->node = of_get_child_by_name(dev->parent->of_node, "smd-edge"); | |
| if (!smd->node) | |
| return; | |
| smd->dev = dev; | |
| smd->subdev.start = smd_subdev_start; | |
| smd->subdev.stop = smd_subdev_stop; | |
| rproc_add_subdev(rproc, &smd->subdev); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_add_smd_subdev); | |
| /** | |
| * qcom_remove_smd_subdev() - remove the smd subdevice from rproc | |
| * @rproc: rproc handle | |
| * @smd: the SMD subdevice to remove | |
| */ | |
| void qcom_remove_smd_subdev(struct rproc *rproc, struct qcom_rproc_subdev *smd) | |
| { | |
| if (!smd->node) | |
| return; | |
| rproc_remove_subdev(rproc, &smd->subdev); | |
| of_node_put(smd->node); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_remove_smd_subdev); | |
| static struct qcom_ssr_subsystem *qcom_ssr_get_subsys(const char *name) | |
| { | |
| struct qcom_ssr_subsystem *info; | |
| mutex_lock(&qcom_ssr_subsys_lock); | |
| /* Match in the global qcom_ssr_subsystem_list with name */ | |
| list_for_each_entry(info, &qcom_ssr_subsystem_list, list) | |
| if (!strcmp(info->name, name)) | |
| goto out; | |
| info = kzalloc_obj(*info); | |
| if (!info) { | |
| info = ERR_PTR(-ENOMEM); | |
| goto out; | |
| } | |
| info->name = kstrdup_const(name, GFP_KERNEL); | |
| srcu_init_notifier_head(&info->notifier_list); | |
| /* Add to global notification list */ | |
| list_add_tail(&info->list, &qcom_ssr_subsystem_list); | |
| out: | |
| mutex_unlock(&qcom_ssr_subsys_lock); | |
| return info; | |
| } | |
| /** | |
| * qcom_register_ssr_notifier() - register SSR notification handler | |
| * @name: Subsystem's SSR name | |
| * @nb: notifier_block to be invoked upon subsystem's state change | |
| * | |
| * This registers the @nb notifier block as part the notifier chain for a | |
| * remoteproc associated with @name. The notifier block's callback | |
| * will be invoked when the remote processor's SSR events occur | |
| * (pre/post startup and pre/post shutdown). | |
| * | |
| * Return: a subsystem cookie on success, ERR_PTR on failure. | |
| */ | |
| void *qcom_register_ssr_notifier(const char *name, struct notifier_block *nb) | |
| { | |
| struct qcom_ssr_subsystem *info; | |
| info = qcom_ssr_get_subsys(name); | |
| if (IS_ERR(info)) | |
| return info; | |
| srcu_notifier_chain_register(&info->notifier_list, nb); | |
| return &info->notifier_list; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_register_ssr_notifier); | |
| /** | |
| * qcom_unregister_ssr_notifier() - unregister SSR notification handler | |
| * @notify: subsystem cookie returned from qcom_register_ssr_notifier | |
| * @nb: notifier_block to unregister | |
| * | |
| * This function will unregister the notifier from the particular notifier | |
| * chain. | |
| * | |
| * Return: 0 on success, %ENOENT otherwise. | |
| */ | |
| int qcom_unregister_ssr_notifier(void *notify, struct notifier_block *nb) | |
| { | |
| return srcu_notifier_chain_unregister(notify, nb); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_unregister_ssr_notifier); | |
| static int ssr_notify_prepare(struct rproc_subdev *subdev) | |
| { | |
| struct qcom_rproc_ssr *ssr = to_ssr_subdev(subdev); | |
| struct qcom_ssr_notify_data data = { | |
| .name = ssr->info->name, | |
| .crashed = false, | |
| }; | |
| srcu_notifier_call_chain(&ssr->info->notifier_list, | |
| QCOM_SSR_BEFORE_POWERUP, &data); | |
| return 0; | |
| } | |
| static int ssr_notify_start(struct rproc_subdev *subdev) | |
| { | |
| struct qcom_rproc_ssr *ssr = to_ssr_subdev(subdev); | |
| struct qcom_ssr_notify_data data = { | |
| .name = ssr->info->name, | |
| .crashed = false, | |
| }; | |
| srcu_notifier_call_chain(&ssr->info->notifier_list, | |
| QCOM_SSR_AFTER_POWERUP, &data); | |
| return 0; | |
| } | |
| static void ssr_notify_stop(struct rproc_subdev *subdev, bool crashed) | |
| { | |
| struct qcom_rproc_ssr *ssr = to_ssr_subdev(subdev); | |
| struct qcom_ssr_notify_data data = { | |
| .name = ssr->info->name, | |
| .crashed = crashed, | |
| }; | |
| srcu_notifier_call_chain(&ssr->info->notifier_list, | |
| QCOM_SSR_BEFORE_SHUTDOWN, &data); | |
| } | |
| static void ssr_notify_unprepare(struct rproc_subdev *subdev) | |
| { | |
| struct qcom_rproc_ssr *ssr = to_ssr_subdev(subdev); | |
| struct qcom_ssr_notify_data data = { | |
| .name = ssr->info->name, | |
| .crashed = false, | |
| }; | |
| srcu_notifier_call_chain(&ssr->info->notifier_list, | |
| QCOM_SSR_AFTER_SHUTDOWN, &data); | |
| } | |
| /** | |
| * qcom_add_ssr_subdev() - register subdevice as restart notification source | |
| * @rproc: rproc handle | |
| * @ssr: SSR subdevice handle | |
| * @ssr_name: identifier to use for notifications originating from @rproc | |
| * | |
| * As the @ssr is registered with the @rproc SSR events will be sent to all | |
| * registered listeners for the remoteproc when it's SSR events occur | |
| * (pre/post startup and pre/post shutdown). | |
| */ | |
| void qcom_add_ssr_subdev(struct rproc *rproc, struct qcom_rproc_ssr *ssr, | |
| const char *ssr_name) | |
| { | |
| struct qcom_ssr_subsystem *info; | |
| info = qcom_ssr_get_subsys(ssr_name); | |
| if (IS_ERR(info)) { | |
| dev_err(&rproc->dev, "Failed to add ssr subdevice\n"); | |
| return; | |
| } | |
| ssr->info = info; | |
| ssr->subdev.prepare = ssr_notify_prepare; | |
| ssr->subdev.start = ssr_notify_start; | |
| ssr->subdev.stop = ssr_notify_stop; | |
| ssr->subdev.unprepare = ssr_notify_unprepare; | |
| rproc_add_subdev(rproc, &ssr->subdev); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_add_ssr_subdev); | |
| /** | |
| * qcom_remove_ssr_subdev() - remove subdevice as restart notification source | |
| * @rproc: rproc handle | |
| * @ssr: SSR subdevice handle | |
| */ | |
| void qcom_remove_ssr_subdev(struct rproc *rproc, struct qcom_rproc_ssr *ssr) | |
| { | |
| rproc_remove_subdev(rproc, &ssr->subdev); | |
| ssr->info = NULL; | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_remove_ssr_subdev); | |
| static void pdm_dev_release(struct device *dev) | |
| { | |
| struct auxiliary_device *adev = to_auxiliary_dev(dev); | |
| kfree(adev); | |
| } | |
| static int pdm_notify_prepare(struct rproc_subdev *subdev) | |
| { | |
| struct qcom_rproc_pdm *pdm = to_pdm_subdev(subdev); | |
| struct auxiliary_device *adev; | |
| int ret; | |
| adev = kzalloc_obj(*adev); | |
| if (!adev) | |
| return -ENOMEM; | |
| adev->dev.parent = pdm->dev; | |
| adev->dev.release = pdm_dev_release; | |
| adev->name = "pd-mapper"; | |
| adev->id = pdm->index; | |
| ret = auxiliary_device_init(adev); | |
| if (ret) { | |
| kfree(adev); | |
| return ret; | |
| } | |
| ret = auxiliary_device_add(adev); | |
| if (ret) { | |
| auxiliary_device_uninit(adev); | |
| return ret; | |
| } | |
| pdm->adev = adev; | |
| return 0; | |
| } | |
| static void pdm_notify_unprepare(struct rproc_subdev *subdev) | |
| { | |
| struct qcom_rproc_pdm *pdm = to_pdm_subdev(subdev); | |
| if (!pdm->adev) | |
| return; | |
| auxiliary_device_delete(pdm->adev); | |
| auxiliary_device_uninit(pdm->adev); | |
| pdm->adev = NULL; | |
| } | |
| /** | |
| * qcom_add_pdm_subdev() - register PD Mapper subdevice | |
| * @rproc: rproc handle | |
| * @pdm: PDM subdevice handle | |
| * | |
| * Register @pdm so that Protection Device mapper service is started when the | |
| * DSP is started too. | |
| */ | |
| void qcom_add_pdm_subdev(struct rproc *rproc, struct qcom_rproc_pdm *pdm) | |
| { | |
| pdm->dev = &rproc->dev; | |
| pdm->index = rproc->index; | |
| pdm->subdev.prepare = pdm_notify_prepare; | |
| pdm->subdev.unprepare = pdm_notify_unprepare; | |
| rproc_add_subdev(rproc, &pdm->subdev); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_add_pdm_subdev); | |
| /** | |
| * qcom_remove_pdm_subdev() - remove PD Mapper subdevice | |
| * @rproc: rproc handle | |
| * @pdm: PDM subdevice handle | |
| * | |
| * Remove the PD Mapper subdevice. | |
| */ | |
| void qcom_remove_pdm_subdev(struct rproc *rproc, struct qcom_rproc_pdm *pdm) | |
| { | |
| rproc_remove_subdev(rproc, &pdm->subdev); | |
| } | |
| EXPORT_SYMBOL_GPL(qcom_remove_pdm_subdev); | |
| MODULE_DESCRIPTION("Qualcomm Remoteproc helper driver"); | |
| MODULE_LICENSE("GPL v2"); |