| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Force feedback driver for USB HID PID compliant devices | |
| * | |
| * Copyright (c) 2005, 2006 Anssi Hannula <anssi.hannula@gmail.com> | |
| * Upgraded 2025 by Oleg Makarenko and Tomasz PakuĊa | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include "hid-pidff.h" | |
| #include <linux/hid.h> | |
| #include <linux/input.h> | |
| #include <linux/math64.h> | |
| #include <linux/minmax.h> | |
| #include <linux/slab.h> | |
| #include <linux/stringify.h> | |
| #include <linux/usb.h> | |
| #define PID_EFFECTS_MAX 64 | |
| #define PID_INFINITE U16_MAX | |
| /* Linux Force Feedback API uses miliseconds as time unit */ | |
| #define FF_TIME_EXPONENT -3 | |
| #define FF_INFINITE 0 | |
| /* Report usage table used to put reports into an array */ | |
| #define PID_SET_EFFECT 0 | |
| #define PID_EFFECT_OPERATION 1 | |
| #define PID_DEVICE_GAIN 2 | |
| #define PID_POOL 3 | |
| #define PID_BLOCK_LOAD 4 | |
| #define PID_BLOCK_FREE 5 | |
| #define PID_DEVICE_CONTROL 6 | |
| #define PID_CREATE_NEW_EFFECT 7 | |
| #define PID_REQUIRED_REPORTS 8 | |
| #define PID_SET_ENVELOPE 8 | |
| #define PID_SET_CONDITION 9 | |
| #define PID_SET_PERIODIC 10 | |
| #define PID_SET_CONSTANT 11 | |
| #define PID_SET_RAMP 12 | |
| static const u8 pidff_reports[] = { | |
| 0x21, 0x77, 0x7d, 0x7f, 0x89, 0x90, 0x96, 0xab, | |
| 0x5a, 0x5f, 0x6e, 0x73, 0x74 | |
| }; | |
| /* | |
| * device_control is really 0x95, but 0x96 specified | |
| * as it is the usage of the only field in that report. | |
| */ | |
| /* PID special fields */ | |
| #define PID_EFFECT_TYPE 0x25 | |
| #define PID_AXES_ENABLE 0x55 | |
| #define PID_DIRECTION 0x57 | |
| #define PID_EFFECT_OPERATION_ARRAY 0x78 | |
| #define PID_BLOCK_LOAD_STATUS 0x8b | |
| #define PID_DEVICE_CONTROL_ARRAY 0x96 | |
| /* Value usage tables used to put fields and values into arrays */ | |
| #define PID_EFFECT_BLOCK_INDEX 0 | |
| #define PID_DURATION 1 | |
| #define PID_GAIN 2 | |
| #define PID_TRIGGER_BUTTON 3 | |
| #define PID_TRIGGER_REPEAT_INT 4 | |
| #define PID_DIRECTION_ENABLE 5 | |
| #define PID_START_DELAY 6 | |
| static const u8 pidff_set_effect[] = { | |
| 0x22, 0x50, 0x52, 0x53, 0x54, 0x56, 0xa7 | |
| }; | |
| #define PID_ATTACK_LEVEL 1 | |
| #define PID_ATTACK_TIME 2 | |
| #define PID_FADE_LEVEL 3 | |
| #define PID_FADE_TIME 4 | |
| static const u8 pidff_set_envelope[] = { 0x22, 0x5b, 0x5c, 0x5d, 0x5e }; | |
| #define PID_PARAM_BLOCK_OFFSET 1 | |
| #define PID_CP_OFFSET 2 | |
| #define PID_POS_COEFFICIENT 3 | |
| #define PID_NEG_COEFFICIENT 4 | |
| #define PID_POS_SATURATION 5 | |
| #define PID_NEG_SATURATION 6 | |
| #define PID_DEADBAND 7 | |
| static const u8 pidff_set_condition[] = { | |
| 0x22, 0x23, 0x60, 0x61, 0x62, 0x63, 0x64, 0x65 | |
| }; | |
| #define PID_MAGNITUDE 1 | |
| #define PID_OFFSET 2 | |
| #define PID_PHASE 3 | |
| #define PID_PERIOD 4 | |
| static const u8 pidff_set_periodic[] = { 0x22, 0x70, 0x6f, 0x71, 0x72 }; | |
| static const u8 pidff_set_constant[] = { 0x22, 0x70 }; | |
| #define PID_RAMP_START 1 | |
| #define PID_RAMP_END 2 | |
| static const u8 pidff_set_ramp[] = { 0x22, 0x75, 0x76 }; | |
| #define PID_RAM_POOL_AVAILABLE 1 | |
| static const u8 pidff_block_load[] = { 0x22, 0xac }; | |
| #define PID_LOOP_COUNT 1 | |
| static const u8 pidff_effect_operation[] = { 0x22, 0x7c }; | |
| static const u8 pidff_block_free[] = { 0x22 }; | |
| #define PID_DEVICE_GAIN_FIELD 0 | |
| static const u8 pidff_device_gain[] = { 0x7e }; | |
| #define PID_RAM_POOL_SIZE 0 | |
| #define PID_SIMULTANEOUS_MAX 1 | |
| #define PID_DEVICE_MANAGED_POOL 2 | |
| static const u8 pidff_pool[] = { 0x80, 0x83, 0xa9 }; | |
| /* Special field key tables used to put special field keys into arrays */ | |
| #define PID_ENABLE_ACTUATORS 0 | |
| #define PID_DISABLE_ACTUATORS 1 | |
| #define PID_STOP_ALL_EFFECTS 2 | |
| #define PID_RESET 3 | |
| #define PID_PAUSE 4 | |
| #define PID_CONTINUE 5 | |
| static const u8 pidff_device_control[] = { 0x97, 0x98, 0x99, 0x9a, 0x9b, 0x9c }; | |
| #define PID_CONSTANT 0 | |
| #define PID_RAMP 1 | |
| #define PID_SQUARE 2 | |
| #define PID_SINE 3 | |
| #define PID_TRIANGLE 4 | |
| #define PID_SAW_UP 5 | |
| #define PID_SAW_DOWN 6 | |
| #define PID_SPRING 7 | |
| #define PID_DAMPER 8 | |
| #define PID_INERTIA 9 | |
| #define PID_FRICTION 10 | |
| static const u8 pidff_effect_types[] = { | |
| 0x26, 0x27, 0x30, 0x31, 0x32, 0x33, 0x34, | |
| 0x40, 0x41, 0x42, 0x43 | |
| }; | |
| #define PID_BLOCK_LOAD_SUCCESS 0 | |
| #define PID_BLOCK_LOAD_FULL 1 | |
| #define PID_BLOCK_LOAD_ERROR 2 | |
| static const u8 pidff_block_load_status[] = { 0x8c, 0x8d, 0x8e }; | |
| #define PID_EFFECT_START 0 | |
| #define PID_EFFECT_STOP 1 | |
| static const u8 pidff_effect_operation_status[] = { 0x79, 0x7b }; | |
| #define PID_DIRECTION_NORTH 0x0000 | |
| #define PID_DIRECTION_EAST 0x4000 | |
| #define PID_DIRECTION_SOUTH 0x8000 | |
| #define PID_DIRECTION_WEST 0xc000 | |
| #define PIDFF_FIXED_WHEEL_DIRECTION PID_DIRECTION_EAST | |
| /* AXES_ENABLE and DIRECTION axes */ | |
| enum pid_axes { | |
| PID_AXIS_X, | |
| PID_AXIS_Y, | |
| PID_AXIS_Z, | |
| PID_AXIS_RX, | |
| PID_AXIS_RY, | |
| PID_AXIS_RZ, | |
| PID_AXIS_SLIDER, | |
| PID_AXIS_DIAL, | |
| PID_AXIS_WHEEL, | |
| PID_AXES_COUNT, | |
| }; | |
| static const u8 pidff_direction_axis[] = { | |
| HID_USAGE & HID_GD_X, | |
| HID_USAGE & HID_GD_Y, | |
| HID_USAGE & HID_GD_Z, | |
| HID_USAGE & HID_GD_RX, | |
| HID_USAGE & HID_GD_RY, | |
| HID_USAGE & HID_GD_RZ, | |
| HID_USAGE & HID_GD_SLIDER, | |
| HID_USAGE & HID_GD_DIAL, | |
| HID_USAGE & HID_GD_WHEEL, | |
| }; | |
| struct pidff_usage { | |
| struct hid_field *field; | |
| s32 *value; | |
| }; | |
| struct pidff_effect { | |
| int pid_id; | |
| int is_infinite; | |
| unsigned int loop_count; | |
| }; | |
| struct pidff_device { | |
| struct hid_device *hid; | |
| struct hid_report *reports[ARRAY_SIZE(pidff_reports)]; | |
| struct pidff_usage set_effect[ARRAY_SIZE(pidff_set_effect)]; | |
| struct pidff_usage set_envelope[ARRAY_SIZE(pidff_set_envelope)]; | |
| struct pidff_usage set_condition[ARRAY_SIZE(pidff_set_condition)]; | |
| struct pidff_usage set_periodic[ARRAY_SIZE(pidff_set_periodic)]; | |
| struct pidff_usage set_constant[ARRAY_SIZE(pidff_set_constant)]; | |
| struct pidff_usage set_ramp[ARRAY_SIZE(pidff_set_ramp)]; | |
| struct pidff_usage device_gain[ARRAY_SIZE(pidff_device_gain)]; | |
| struct pidff_usage block_load[ARRAY_SIZE(pidff_block_load)]; | |
| struct pidff_usage pool[ARRAY_SIZE(pidff_pool)]; | |
| struct pidff_usage effect_operation[ARRAY_SIZE(pidff_effect_operation)]; | |
| struct pidff_usage block_free[ARRAY_SIZE(pidff_block_free)]; | |
| struct pidff_effect effect[PID_EFFECTS_MAX]; | |
| /* | |
| * Special field is a field that is not composed of | |
| * usage<->value pairs that pidff_usage values are | |
| */ | |
| /* Special field in create_new_effect */ | |
| struct hid_field *create_new_effect_type; | |
| /* Special fields in set_effect */ | |
| struct hid_field *set_effect_type; | |
| struct hid_field *effect_direction; | |
| struct hid_field *axes_enable; | |
| /* Special field in device_control */ | |
| struct hid_field *device_control; | |
| /* Special field in block_load */ | |
| struct hid_field *block_load_status; | |
| /* Special field in effect_operation */ | |
| struct hid_field *effect_operation_status; | |
| int control_id[ARRAY_SIZE(pidff_device_control)]; | |
| int type_id[ARRAY_SIZE(pidff_effect_types)]; | |
| int status_id[ARRAY_SIZE(pidff_block_load_status)]; | |
| int operation_id[ARRAY_SIZE(pidff_effect_operation_status)]; | |
| int direction_axis_id[ARRAY_SIZE(pidff_direction_axis)]; | |
| u32 quirks; | |
| u8 effect_count; | |
| u8 axis_count; | |
| }; | |
| static int pidff_is_effect_conditional(struct ff_effect *effect) | |
| { | |
| return effect->type == FF_SPRING || | |
| effect->type == FF_DAMPER || | |
| effect->type == FF_INERTIA || | |
| effect->type == FF_FRICTION; | |
| } | |
| static int pidff_is_duration_infinite(u16 duration) | |
| { | |
| return duration == FF_INFINITE || duration == PID_INFINITE; | |
| } | |
| /* | |
| * Get PID effect index from FF effect type. | |
| * Return 0 if invalid. | |
| */ | |
| static int pidff_effect_ff_to_pid(struct ff_effect *effect) | |
| { | |
| switch (effect->type) { | |
| case FF_CONSTANT: | |
| return PID_CONSTANT; | |
| case FF_RAMP: | |
| return PID_RAMP; | |
| case FF_SPRING: | |
| return PID_SPRING; | |
| case FF_DAMPER: | |
| return PID_DAMPER; | |
| case FF_INERTIA: | |
| return PID_INERTIA; | |
| case FF_FRICTION: | |
| return PID_FRICTION; | |
| case FF_PERIODIC: | |
| switch (effect->u.periodic.waveform) { | |
| case FF_SQUARE: | |
| return PID_SQUARE; | |
| case FF_TRIANGLE: | |
| return PID_TRIANGLE; | |
| case FF_SINE: | |
| return PID_SINE; | |
| case FF_SAW_UP: | |
| return PID_SAW_UP; | |
| case FF_SAW_DOWN: | |
| return PID_SAW_DOWN; | |
| } | |
| } | |
| pr_err("invalid effect type\n"); | |
| return -EINVAL; | |
| } | |
| /* | |
| * Get effect id in the device descriptor. | |
| * Return 0 if invalid. | |
| */ | |
| static int pidff_get_effect_type_id(struct pidff_device *pidff, | |
| struct ff_effect *effect) | |
| { | |
| int id = pidff_effect_ff_to_pid(effect); | |
| if (id < 0) | |
| return 0; | |
| if (effect->type == FF_PERIODIC && | |
| pidff->quirks & HID_PIDFF_QUIRK_PERIODIC_SINE_ONLY) | |
| id = PID_SINE; | |
| return pidff->type_id[id]; | |
| } | |
| /* | |
| * Clamp value for a given field | |
| */ | |
| static s32 pidff_clamp(s32 i, struct hid_field *field) | |
| { | |
| return (s32)clamp(i, field->logical_minimum, field->logical_maximum); | |
| } | |
| /* | |
| * Scale an unsigned value with range 0..max for the given field | |
| */ | |
| static int pidff_rescale(int i, int max, struct hid_field *field) | |
| { | |
| /* 64 bits needed for big values during rescale */ | |
| s64 result = field->logical_maximum - field->logical_minimum; | |
| return div_s64(result * i, max) + field->logical_minimum; | |
| } | |
| /* | |
| * Scale a signed value in range S16_MIN..S16_MAX for the given field | |
| */ | |
| static int pidff_rescale_signed(int i, struct hid_field *field) | |
| { | |
| if (i > 0) | |
| return i * field->logical_maximum / S16_MAX; | |
| if (i < 0) | |
| return i * field->logical_minimum / S16_MIN; | |
| return 0; | |
| } | |
| /* | |
| * Scale time value from Linux default (ms) to field units | |
| */ | |
| static u32 pidff_rescale_time(u16 time, struct hid_field *field) | |
| { | |
| u32 scaled_time = time; | |
| int exponent = field->unit_exponent; | |
| pr_debug("time field exponent: %d\n", exponent); | |
| for (; exponent < FF_TIME_EXPONENT; exponent++) | |
| scaled_time *= 10; | |
| for (; exponent > FF_TIME_EXPONENT; exponent--) | |
| scaled_time /= 10; | |
| pr_debug("time calculated from %d to %d\n", time, scaled_time); | |
| return scaled_time; | |
| } | |
| static void pidff_set(struct pidff_usage *usage, u16 value) | |
| { | |
| usage->value[0] = pidff_rescale(value, U16_MAX, usage->field); | |
| pr_debug("calculated from %d to %d\n", value, usage->value[0]); | |
| } | |
| static void pidff_set_signed(struct pidff_usage *usage, s16 value) | |
| { | |
| if (usage->field->logical_minimum < 0) | |
| usage->value[0] = pidff_rescale_signed(value, usage->field); | |
| else { | |
| if (value < 0) | |
| usage->value[0] = | |
| pidff_rescale(-value, -S16_MIN, usage->field); | |
| else | |
| usage->value[0] = | |
| pidff_rescale(value, S16_MAX, usage->field); | |
| } | |
| pr_debug("calculated from %d to %d\n", value, usage->value[0]); | |
| } | |
| static void pidff_set_time(struct pidff_usage *usage, u16 time) | |
| { | |
| usage->value[0] = pidff_clamp(pidff_rescale_time(time, usage->field), | |
| usage->field); | |
| } | |
| static void pidff_set_duration(struct pidff_usage *usage, u16 duration) | |
| { | |
| /* PID defines INFINITE as the max possible value for duration field */ | |
| if (pidff_is_duration_infinite(duration)) { | |
| usage->value[0] = (1U << usage->field->report_size) - 1; | |
| return; | |
| } | |
| pidff_set_time(usage, duration); | |
| } | |
| static void pidff_set_effect_direction(struct pidff_device *pidff, | |
| struct ff_effect *effect) | |
| { | |
| u16 direction = effect->direction; | |
| int direction_enable = 1; | |
| /* Use fixed direction if needed */ | |
| if (pidff->quirks & HID_PIDFF_QUIRK_FIX_CONDITIONAL_DIRECTION && | |
| pidff_is_effect_conditional(effect)) | |
| direction = PIDFF_FIXED_WHEEL_DIRECTION; | |
| pidff->set_effect[PID_DIRECTION_ENABLE].value[0] = direction_enable; | |
| pidff->effect_direction->value[0] = | |
| pidff_rescale(direction, U16_MAX, pidff->effect_direction); | |
| if (direction_enable) | |
| return; | |
| /* | |
| * For use with improved FFB API | |
| * We want to read the selected axes and their direction from the effect | |
| * struct and only enable those. For now, enable all axes. | |
| * | |
| */ | |
| for (int i = 0; i < PID_AXES_COUNT; i++) { | |
| /* HID index starts with 1 */ | |
| int index = pidff->direction_axis_id[i] - 1; | |
| if (index < 0) | |
| continue; | |
| pidff->axes_enable->value[index] = 1; | |
| pidff->effect_direction->value[index] = pidff_rescale( | |
| direction, U16_MAX, pidff->effect_direction); | |
| } | |
| } | |
| /* | |
| * Send envelope report to the device | |
| */ | |
| static void pidff_set_envelope_report(struct pidff_device *pidff, | |
| struct ff_envelope *envelope) | |
| { | |
| pidff->set_envelope[PID_EFFECT_BLOCK_INDEX].value[0] = | |
| pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0]; | |
| pidff->set_envelope[PID_ATTACK_LEVEL].value[0] = | |
| pidff_rescale(envelope->attack_level > | |
| S16_MAX ? S16_MAX : envelope->attack_level, S16_MAX, | |
| pidff->set_envelope[PID_ATTACK_LEVEL].field); | |
| pidff->set_envelope[PID_FADE_LEVEL].value[0] = | |
| pidff_rescale(envelope->fade_level > | |
| S16_MAX ? S16_MAX : envelope->fade_level, S16_MAX, | |
| pidff->set_envelope[PID_FADE_LEVEL].field); | |
| pidff_set_time(&pidff->set_envelope[PID_ATTACK_TIME], | |
| envelope->attack_length); | |
| pidff_set_time(&pidff->set_envelope[PID_FADE_TIME], | |
| envelope->fade_length); | |
| hid_hw_request(pidff->hid, pidff->reports[PID_SET_ENVELOPE], | |
| HID_REQ_SET_REPORT); | |
| } | |
| /* | |
| * Test if the new envelope differs from old one | |
| */ | |
| static int pidff_needs_set_envelope(struct ff_envelope *envelope, | |
| struct ff_envelope *old) | |
| { | |
| int needs_new_envelope; | |
| needs_new_envelope = envelope->attack_level != 0 || | |
| envelope->fade_level != 0 || | |
| envelope->attack_length != 0 || | |
| envelope->fade_length != 0; | |
| if (!needs_new_envelope) | |
| return 0; | |
| if (!old) | |
| return needs_new_envelope; | |
| return envelope->attack_level != old->attack_level || | |
| envelope->fade_level != old->fade_level || | |
| envelope->attack_length != old->attack_length || | |
| envelope->fade_length != old->fade_length; | |
| } | |
| /* | |
| * Send constant force report to the device | |
| */ | |
| static void pidff_set_constant_report(struct pidff_device *pidff, | |
| struct ff_effect *effect) | |
| { | |
| pidff->set_constant[PID_EFFECT_BLOCK_INDEX].value[0] = | |
| pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0]; | |
| pidff_set_signed(&pidff->set_constant[PID_MAGNITUDE], | |
| effect->u.constant.level); | |
| hid_hw_request(pidff->hid, pidff->reports[PID_SET_CONSTANT], | |
| HID_REQ_SET_REPORT); | |
| } | |
| /* | |
| * Test if the constant parameters have changed between effects | |
| */ | |
| static int pidff_needs_set_constant(struct ff_effect *effect, | |
| struct ff_effect *old) | |
| { | |
| return effect->u.constant.level != old->u.constant.level; | |
| } | |
| /* | |
| * Send set effect report to the device | |
| */ | |
| static void pidff_set_effect_report(struct pidff_device *pidff, | |
| struct ff_effect *effect) | |
| { | |
| pidff->set_effect[PID_EFFECT_BLOCK_INDEX].value[0] = | |
| pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0]; | |
| pidff->set_effect_type->value[0] = | |
| pidff_get_effect_type_id(pidff, effect); | |
| pidff_set_duration(&pidff->set_effect[PID_DURATION], | |
| effect->replay.length); | |
| /* Some games set this to random values that can be out of range */ | |
| s32 trigger_button_max = | |
| pidff->set_effect[PID_TRIGGER_BUTTON].field->logical_maximum; | |
| if (effect->trigger.button <= trigger_button_max) { | |
| pidff->set_effect[PID_TRIGGER_BUTTON].value[0] = | |
| effect->trigger.button; | |
| pidff_set_time(&pidff->set_effect[PID_TRIGGER_REPEAT_INT], | |
| effect->trigger.interval); | |
| } else { | |
| pidff->set_effect[PID_TRIGGER_BUTTON].value[0] = 0; | |
| pidff->set_effect[PID_TRIGGER_REPEAT_INT].value[0] = 0; | |
| } | |
| pidff->set_effect[PID_GAIN].value[0] = | |
| pidff->set_effect[PID_GAIN].field->logical_maximum; | |
| pidff_set_effect_direction(pidff, effect); | |
| /* Omit setting delay field if it's missing */ | |
| if (!(pidff->quirks & HID_PIDFF_QUIRK_MISSING_DELAY)) | |
| pidff_set_time(&pidff->set_effect[PID_START_DELAY], | |
| effect->replay.delay); | |
| hid_hw_request(pidff->hid, pidff->reports[PID_SET_EFFECT], | |
| HID_REQ_SET_REPORT); | |
| } | |
| /* | |
| * Test if the values used in set_effect have changed | |
| */ | |
| static int pidff_needs_set_effect(struct ff_effect *effect, | |
| struct ff_effect *old) | |
| { | |
| return effect->replay.length != old->replay.length || | |
| effect->trigger.interval != old->trigger.interval || | |
| effect->trigger.button != old->trigger.button || | |
| effect->direction != old->direction || | |
| effect->replay.delay != old->replay.delay; | |
| } | |
| /* | |
| * Send periodic effect report to the device | |
| */ | |
| static void pidff_set_periodic_report(struct pidff_device *pidff, | |
| struct ff_effect *effect) | |
| { | |
| pidff->set_periodic[PID_EFFECT_BLOCK_INDEX].value[0] = | |
| pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0]; | |
| pidff_set_signed(&pidff->set_periodic[PID_MAGNITUDE], | |
| effect->u.periodic.magnitude); | |
| pidff_set_signed(&pidff->set_periodic[PID_OFFSET], | |
| effect->u.periodic.offset); | |
| pidff_set(&pidff->set_periodic[PID_PHASE], effect->u.periodic.phase); | |
| pidff_set_time(&pidff->set_periodic[PID_PERIOD], | |
| effect->u.periodic.period); | |
| hid_hw_request(pidff->hid, pidff->reports[PID_SET_PERIODIC], | |
| HID_REQ_SET_REPORT); | |
| } | |
| /* | |
| * Test if periodic effect parameters have changed | |
| */ | |
| static int pidff_needs_set_periodic(struct ff_effect *effect, | |
| struct ff_effect *old) | |
| { | |
| return effect->u.periodic.magnitude != old->u.periodic.magnitude || | |
| effect->u.periodic.offset != old->u.periodic.offset || | |
| effect->u.periodic.phase != old->u.periodic.phase || | |
| effect->u.periodic.period != old->u.periodic.period; | |
| } | |
| /* | |
| * Send condition effect reports to the device | |
| */ | |
| static void pidff_set_condition_report(struct pidff_device *pidff, | |
| struct ff_effect *effect) | |
| { | |
| int i, max_axis; | |
| /* Devices missing Parameter Block Offset can only have one axis */ | |
| max_axis = pidff->quirks & HID_PIDFF_QUIRK_MISSING_PBO ? 1 : 2; | |
| pidff->set_condition[PID_EFFECT_BLOCK_INDEX].value[0] = | |
| pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0]; | |
| for (i = 0; i < max_axis; i++) { | |
| /* Omit Parameter Block Offset if missing */ | |
| if (!(pidff->quirks & HID_PIDFF_QUIRK_MISSING_PBO)) | |
| pidff->set_condition[PID_PARAM_BLOCK_OFFSET].value[0] = i; | |
| pidff_set_signed(&pidff->set_condition[PID_CP_OFFSET], | |
| effect->u.condition[i].center); | |
| pidff_set_signed(&pidff->set_condition[PID_POS_COEFFICIENT], | |
| effect->u.condition[i].right_coeff); | |
| pidff_set(&pidff->set_condition[PID_POS_SATURATION], | |
| effect->u.condition[i].right_saturation); | |
| /* Omit Negative Coefficient if missing */ | |
| if (!(pidff->quirks & HID_PIDFF_QUIRK_MISSING_NEG_COEFFICIENT)) | |
| pidff_set_signed(&pidff->set_condition[PID_NEG_COEFFICIENT], | |
| effect->u.condition[i].left_coeff); | |
| /* Omit Negative Saturation if missing */ | |
| if (!(pidff->quirks & HID_PIDFF_QUIRK_MISSING_NEG_SATURATION)) | |
| pidff_set_signed(&pidff->set_condition[PID_NEG_SATURATION], | |
| effect->u.condition[i].left_saturation); | |
| /* Omit Deadband field if missing */ | |
| if (!(pidff->quirks & HID_PIDFF_QUIRK_MISSING_DEADBAND)) | |
| pidff_set(&pidff->set_condition[PID_DEADBAND], | |
| effect->u.condition[i].deadband); | |
| hid_hw_request(pidff->hid, pidff->reports[PID_SET_CONDITION], | |
| HID_REQ_SET_REPORT); | |
| } | |
| } | |
| /* | |
| * Test if condition effect parameters have changed | |
| */ | |
| static int pidff_needs_set_condition(struct ff_effect *effect, | |
| struct ff_effect *old) | |
| { | |
| int i; | |
| int ret = 0; | |
| for (i = 0; i < 2; i++) { | |
| struct ff_condition_effect *cond = &effect->u.condition[i]; | |
| struct ff_condition_effect *old_cond = &old->u.condition[i]; | |
| ret |= cond->center != old_cond->center || | |
| cond->right_coeff != old_cond->right_coeff || | |
| cond->left_coeff != old_cond->left_coeff || | |
| cond->right_saturation != old_cond->right_saturation || | |
| cond->left_saturation != old_cond->left_saturation || | |
| cond->deadband != old_cond->deadband; | |
| } | |
| return ret; | |
| } | |
| /* | |
| * Send ramp force report to the device | |
| */ | |
| static void pidff_set_ramp_report(struct pidff_device *pidff, | |
| struct ff_effect *effect) | |
| { | |
| pidff->set_ramp[PID_EFFECT_BLOCK_INDEX].value[0] = | |
| pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0]; | |
| pidff_set_signed(&pidff->set_ramp[PID_RAMP_START], | |
| effect->u.ramp.start_level); | |
| pidff_set_signed(&pidff->set_ramp[PID_RAMP_END], | |
| effect->u.ramp.end_level); | |
| hid_hw_request(pidff->hid, pidff->reports[PID_SET_RAMP], | |
| HID_REQ_SET_REPORT); | |
| } | |
| /* | |
| * Test if ramp force parameters have changed | |
| */ | |
| static int pidff_needs_set_ramp(struct ff_effect *effect, struct ff_effect *old) | |
| { | |
| return effect->u.ramp.start_level != old->u.ramp.start_level || | |
| effect->u.ramp.end_level != old->u.ramp.end_level; | |
| } | |
| /* | |
| * Set device gain | |
| */ | |
| static void pidff_set_gain_report(struct pidff_device *pidff, u16 gain) | |
| { | |
| if (!pidff->device_gain[PID_DEVICE_GAIN_FIELD].field) | |
| return; | |
| pidff_set(&pidff->device_gain[PID_DEVICE_GAIN_FIELD], gain); | |
| hid_hw_request(pidff->hid, pidff->reports[PID_DEVICE_GAIN], | |
| HID_REQ_SET_REPORT); | |
| } | |
| /* | |
| * Send device control report to the device | |
| */ | |
| static void pidff_set_device_control(struct pidff_device *pidff, int field) | |
| { | |
| const int field_index = pidff->control_id[field]; | |
| if (field_index < 1) | |
| return; | |
| /* Detect if the field is a bitmask variable or an array */ | |
| if (pidff->device_control->flags & HID_MAIN_ITEM_VARIABLE) { | |
| hid_dbg(pidff->hid, "DEVICE_CONTROL is a bitmask\n"); | |
| /* Clear current bitmask */ | |
| for (int i = 0; i < ARRAY_SIZE(pidff_device_control); i++) { | |
| int index = pidff->control_id[i]; | |
| if (index < 1) | |
| continue; | |
| pidff->device_control->value[index - 1] = 0; | |
| } | |
| pidff->device_control->value[field_index - 1] = 1; | |
| } else { | |
| hid_dbg(pidff->hid, "DEVICE_CONTROL is an array\n"); | |
| pidff->device_control->value[0] = field_index; | |
| } | |
| hid_hw_request(pidff->hid, pidff->reports[PID_DEVICE_CONTROL], HID_REQ_SET_REPORT); | |
| hid_hw_wait(pidff->hid); | |
| hid_dbg(pidff->hid, "Device control command 0x%02x sent", | |
| pidff_device_control[field]); | |
| } | |
| /* | |
| * Reset the device, stop all effects, enable actuators | |
| */ | |
| static void pidff_reset(struct pidff_device *pidff) | |
| { | |
| /* We reset twice as sometimes hid_wait_io isn't waiting long enough */ | |
| pidff_set_device_control(pidff, PID_RESET); | |
| pidff_set_device_control(pidff, PID_RESET); | |
| pidff->effect_count = 0; | |
| pidff_set_device_control(pidff, PID_STOP_ALL_EFFECTS); | |
| pidff_set_device_control(pidff, PID_ENABLE_ACTUATORS); | |
| } | |
| /* | |
| * Fetch pool report | |
| */ | |
| static void pidff_fetch_pool(struct pidff_device *pidff) | |
| { | |
| int i; | |
| struct hid_device *hid = pidff->hid; | |
| /* Repeat if PID_SIMULTANEOUS_MAX < 2 to make sure it's correct */ | |
| for (i = 0; i < 20; i++) { | |
| hid_hw_request(hid, pidff->reports[PID_POOL], HID_REQ_GET_REPORT); | |
| hid_hw_wait(hid); | |
| if (!pidff->pool[PID_SIMULTANEOUS_MAX].value) | |
| return; | |
| if (pidff->pool[PID_SIMULTANEOUS_MAX].value[0] >= 2) | |
| return; | |
| } | |
| hid_warn(hid, "device reports %d simultaneous effects\n", | |
| pidff->pool[PID_SIMULTANEOUS_MAX].value[0]); | |
| } | |
| /* | |
| * Send a request for effect upload to the device | |
| * | |
| * Reset and enable actuators if no effects were present on the device | |
| * | |
| * Returns 0 if device reported success, -ENOSPC if the device reported memory | |
| * is full. Upon unknown response the function will retry for 60 times, if | |
| * still unsuccessful -EIO is returned. | |
| */ | |
| static int pidff_request_effect_upload(struct pidff_device *pidff, int efnum) | |
| { | |
| pidff->create_new_effect_type->value[0] = efnum; | |
| hid_hw_request(pidff->hid, pidff->reports[PID_CREATE_NEW_EFFECT], | |
| HID_REQ_SET_REPORT); | |
| hid_dbg(pidff->hid, "create_new_effect sent, type: %d\n", efnum); | |
| pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0] = 0; | |
| pidff->block_load_status->value[0] = 0; | |
| hid_hw_wait(pidff->hid); | |
| for (int i = 0; i < 60; i++) { | |
| hid_dbg(pidff->hid, "pid_block_load requested\n"); | |
| hid_hw_request(pidff->hid, pidff->reports[PID_BLOCK_LOAD], | |
| HID_REQ_GET_REPORT); | |
| hid_hw_wait(pidff->hid); | |
| if (pidff->block_load_status->value[0] == | |
| pidff->status_id[PID_BLOCK_LOAD_SUCCESS]) { | |
| hid_dbg(pidff->hid, "device reported free memory: %d bytes\n", | |
| pidff->block_load[PID_RAM_POOL_AVAILABLE].value ? | |
| pidff->block_load[PID_RAM_POOL_AVAILABLE].value[0] : -1); | |
| return 0; | |
| } | |
| if (pidff->block_load_status->value[0] == | |
| pidff->status_id[PID_BLOCK_LOAD_FULL]) { | |
| hid_dbg(pidff->hid, "not enough memory free: %d bytes\n", | |
| pidff->block_load[PID_RAM_POOL_AVAILABLE].value ? | |
| pidff->block_load[PID_RAM_POOL_AVAILABLE].value[0] : -1); | |
| return -ENOSPC; | |
| } | |
| if (pidff->block_load_status->value[0] == | |
| pidff->status_id[PID_BLOCK_LOAD_ERROR]) { | |
| hid_dbg(pidff->hid, "device error during effect creation\n"); | |
| return -EREMOTEIO; | |
| } | |
| } | |
| hid_err(pidff->hid, "pid_block_load failed 60 times\n"); | |
| return -EIO; | |
| } | |
| static int pidff_needs_playback(struct pidff_device *pidff, int effect_id, int n) | |
| { | |
| return !pidff->effect[effect_id].is_infinite || | |
| pidff->effect[effect_id].loop_count != n; | |
| } | |
| /* | |
| * Play the effect with PID id n times | |
| */ | |
| static void pidff_playback_pid(struct pidff_device *pidff, int pid_id, int n) | |
| { | |
| pidff->effect_operation[PID_EFFECT_BLOCK_INDEX].value[0] = pid_id; | |
| hid_dbg(pidff->hid, "%s PID effect %d", n == 0 ? "stopping" : "playing", | |
| pid_id); | |
| if (n == 0) { | |
| pidff->effect_operation_status->value[0] = | |
| pidff->operation_id[PID_EFFECT_STOP]; | |
| } else { | |
| pidff->effect_operation_status->value[0] = | |
| pidff->operation_id[PID_EFFECT_START]; | |
| pidff->effect_operation[PID_LOOP_COUNT].value[0] = | |
| pidff_clamp(n, pidff->effect_operation[PID_LOOP_COUNT].field); | |
| } | |
| hid_hw_request(pidff->hid, pidff->reports[PID_EFFECT_OPERATION], | |
| HID_REQ_SET_REPORT); | |
| } | |
| /* | |
| * Play the effect with effect id @effect_id for @value times | |
| */ | |
| static int pidff_playback(struct input_dev *dev, int effect_id, int value) | |
| { | |
| struct pidff_device *pidff = dev->ff->private; | |
| if (!pidff_needs_playback(pidff, effect_id, value)) | |
| return 0; | |
| hid_dbg(pidff->hid, "requesting %s on FF effect %d", | |
| value == 0 ? "stop" : "playback", effect_id); | |
| pidff->effect[effect_id].loop_count = value; | |
| pidff_playback_pid(pidff, pidff->effect[effect_id].pid_id, value); | |
| return 0; | |
| } | |
| /* | |
| * Erase effect with PID id | |
| * Decrease the device effect counter | |
| */ | |
| static void pidff_erase_pid(struct pidff_device *pidff, int pid_id) | |
| { | |
| pidff->block_free[PID_EFFECT_BLOCK_INDEX].value[0] = pid_id; | |
| hid_hw_request(pidff->hid, pidff->reports[PID_BLOCK_FREE], | |
| HID_REQ_SET_REPORT); | |
| } | |
| /* | |
| * Stop and erase effect with effect_id | |
| */ | |
| static int pidff_erase_effect(struct input_dev *dev, int effect_id) | |
| { | |
| struct pidff_device *pidff = dev->ff->private; | |
| int pid_id = pidff->effect[effect_id].pid_id; | |
| hid_dbg(pidff->hid, "starting to erase %d/%d\n", effect_id, pid_id); | |
| /* | |
| * Wait for the queue to clear. We do not want | |
| * a full fifo to prevent the effect removal. | |
| */ | |
| hid_hw_wait(pidff->hid); | |
| pidff_playback_pid(pidff, pid_id, 0); | |
| pidff_erase_pid(pidff, pid_id); | |
| if (pidff->effect_count > 0) | |
| pidff->effect_count--; | |
| hid_dbg(pidff->hid, "current effect count: %d", pidff->effect_count); | |
| return 0; | |
| } | |
| #define PIDFF_SET_REPORT_IF_NEEDED(type, effect, old) \ | |
| ({ if (!old || pidff_needs_set_## type(effect, old)) \ | |
| pidff_set_ ##type## _report(pidff, effect); }) | |
| #define PIDFF_SET_ENVELOPE_IF_NEEDED(type, effect, old) \ | |
| ({ if (pidff_needs_set_envelope(&effect->u.type.envelope, \ | |
| old ? &old->u.type.envelope : NULL)) \ | |
| pidff_set_envelope_report(pidff, &effect->u.type.envelope); }) | |
| /* | |
| * Effect upload handler | |
| */ | |
| static int pidff_upload_effect(struct input_dev *dev, struct ff_effect *new, | |
| struct ff_effect *old) | |
| { | |
| struct pidff_device *pidff = dev->ff->private; | |
| const int type_id = pidff_get_effect_type_id(pidff, new); | |
| if (!type_id) { | |
| hid_err(pidff->hid, "effect type not supported\n"); | |
| return -EINVAL; | |
| } | |
| if (!pidff->effect_count) | |
| pidff_reset(pidff); | |
| if (!old) { | |
| int error = pidff_request_effect_upload(pidff, type_id); | |
| if (error) | |
| return error; | |
| pidff->effect_count++; | |
| hid_dbg(pidff->hid, "current effect count: %d", pidff->effect_count); | |
| pidff->effect[new->id].loop_count = 0; | |
| pidff->effect[new->id].pid_id = | |
| pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0]; | |
| } | |
| pidff->effect[new->id].is_infinite = | |
| pidff_is_duration_infinite(new->replay.length); | |
| pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0] = | |
| pidff->effect[new->id].pid_id; | |
| PIDFF_SET_REPORT_IF_NEEDED(effect, new, old); | |
| switch (new->type) { | |
| case FF_CONSTANT: | |
| PIDFF_SET_REPORT_IF_NEEDED(constant, new, old); | |
| PIDFF_SET_ENVELOPE_IF_NEEDED(constant, new, old); | |
| break; | |
| case FF_PERIODIC: | |
| PIDFF_SET_REPORT_IF_NEEDED(periodic, new, old); | |
| PIDFF_SET_ENVELOPE_IF_NEEDED(periodic, new, old); | |
| break; | |
| case FF_RAMP: | |
| PIDFF_SET_REPORT_IF_NEEDED(ramp, new, old); | |
| PIDFF_SET_ENVELOPE_IF_NEEDED(ramp, new, old); | |
| break; | |
| case FF_SPRING: | |
| case FF_DAMPER: | |
| case FF_INERTIA: | |
| case FF_FRICTION: | |
| PIDFF_SET_REPORT_IF_NEEDED(condition, new, old); | |
| break; | |
| } | |
| hid_dbg(pidff->hid, "uploaded\n"); | |
| return 0; | |
| } | |
| /* | |
| * set_gain() handler | |
| */ | |
| static void pidff_set_gain(struct input_dev *dev, u16 gain) | |
| { | |
| pidff_set_gain_report(dev->ff->private, gain); | |
| } | |
| static void pidff_autocenter(struct pidff_device *pidff, u16 magnitude) | |
| { | |
| struct hid_field *field = | |
| pidff->block_load[PID_EFFECT_BLOCK_INDEX].field; | |
| if (!magnitude) { | |
| pidff_playback_pid(pidff, field->logical_minimum, 0); | |
| return; | |
| } | |
| pidff_playback_pid(pidff, field->logical_minimum, 1); | |
| pidff->set_effect[PID_EFFECT_BLOCK_INDEX].value[0] = | |
| pidff->block_load[PID_EFFECT_BLOCK_INDEX].field->logical_minimum; | |
| pidff->set_effect_type->value[0] = pidff->type_id[PID_SPRING]; | |
| pidff->set_effect[PID_DURATION].value[0] = 0; | |
| pidff->set_effect[PID_TRIGGER_BUTTON].value[0] = 0; | |
| pidff->set_effect[PID_TRIGGER_REPEAT_INT].value[0] = 0; | |
| pidff_set(&pidff->set_effect[PID_GAIN], magnitude); | |
| pidff->set_effect[PID_DIRECTION_ENABLE].value[0] = 1; | |
| /* Omit setting delay field if it's missing */ | |
| if (!(pidff->quirks & HID_PIDFF_QUIRK_MISSING_DELAY)) | |
| pidff->set_effect[PID_START_DELAY].value[0] = 0; | |
| hid_hw_request(pidff->hid, pidff->reports[PID_SET_EFFECT], | |
| HID_REQ_SET_REPORT); | |
| } | |
| /* | |
| * pidff_set_autocenter() handler | |
| */ | |
| static void pidff_set_autocenter(struct input_dev *dev, u16 magnitude) | |
| { | |
| pidff_autocenter(dev->ff->private, magnitude); | |
| } | |
| /* | |
| * Find specific usage in a given hid_field | |
| */ | |
| static int pidff_find_usage(struct hid_field *fld, unsigned int usage_code) | |
| { | |
| for (int i = 0; i < fld->maxusage; i++) { | |
| if (fld->usage[i].hid == usage_code) | |
| return i; | |
| } | |
| return -1; | |
| } | |
| /* | |
| * Find hid_field with a specific usage. Return the usage index as well | |
| */ | |
| static int pidff_find_field_with_usage(int *usage_index, | |
| struct hid_report *report, | |
| unsigned int usage_code) | |
| { | |
| for (int i = 0; i < report->maxfield; i++) { | |
| struct hid_field *fld = report->field[i]; | |
| if (fld->maxusage != fld->report_count) { | |
| pr_debug("maxusage and report_count do not match, skipping\n"); | |
| continue; | |
| } | |
| int index = pidff_find_usage(fld, usage_code); | |
| if (index >= 0) { | |
| *usage_index = index; | |
| return i; | |
| } | |
| } | |
| return -1; | |
| } | |
| #define PIDFF_MISSING_FIELD(name, quirks) \ | |
| ({ pr_debug("%s field not found, but that's OK\n", __stringify(name)); \ | |
| pr_debug("Setting MISSING_%s quirk\n", __stringify(name)); \ | |
| *quirks |= HID_PIDFF_QUIRK_MISSING_ ## name; }) | |
| /* | |
| * Find fields from a report and fill a pidff_usage | |
| */ | |
| static int pidff_find_fields(struct pidff_usage *usage, const u8 *table, | |
| struct hid_report *report, int count, int strict, | |
| u32 *quirks) | |
| { | |
| if (!report) { | |
| pr_debug("%s, null report\n", __func__); | |
| return -1; | |
| } | |
| for (int i = 0; i < count; i++) { | |
| int index; | |
| int found = pidff_find_field_with_usage(&index, report, | |
| HID_UP_PID | table[i]); | |
| if (found >= 0) { | |
| pr_debug("found %d at %d->%d\n", i, found, index); | |
| usage[i].field = report->field[found]; | |
| usage[i].value = &report->field[found]->value[index]; | |
| continue; | |
| } | |
| /* Field quirks auto-detection */ | |
| if (table[i] == pidff_set_effect[PID_START_DELAY]) | |
| PIDFF_MISSING_FIELD(DELAY, quirks); | |
| else if (table[i] == pidff_set_condition[PID_PARAM_BLOCK_OFFSET]) | |
| PIDFF_MISSING_FIELD(PBO, quirks); | |
| else if (table[i] == pidff_set_condition[PID_NEG_COEFFICIENT]) | |
| PIDFF_MISSING_FIELD(NEG_COEFFICIENT, quirks); | |
| else if (table[i] == pidff_set_condition[PID_NEG_SATURATION]) | |
| PIDFF_MISSING_FIELD(NEG_SATURATION, quirks); | |
| else if (table[i] == pidff_set_condition[PID_DEADBAND]) | |
| PIDFF_MISSING_FIELD(DEADBAND, quirks); | |
| else if (strict) { | |
| pr_debug("failed to locate %d\n", i); | |
| return -1; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Return index into pidff_reports for the given usage | |
| */ | |
| static int pidff_check_usage(int usage) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(pidff_reports); i++) | |
| if (usage == (HID_UP_PID | pidff_reports[i])) | |
| return i; | |
| return -1; | |
| } | |
| /* | |
| * Find the reports and fill pidff->reports[] | |
| * report_type specifies either OUTPUT or FEATURE reports | |
| */ | |
| static void pidff_find_reports(struct hid_device *hid, int report_type, | |
| struct pidff_device *pidff) | |
| { | |
| struct hid_report *report; | |
| int i, ret; | |
| list_for_each_entry(report, | |
| &hid->report_enum[report_type].report_list, list) { | |
| if (report->maxfield < 1) | |
| continue; | |
| ret = pidff_check_usage(report->field[0]->logical); | |
| if (ret != -1) { | |
| hid_dbg(hid, "found usage 0x%02x from field->logical\n", | |
| pidff_reports[ret]); | |
| pidff->reports[ret] = report; | |
| continue; | |
| } | |
| /* | |
| * Sometimes logical collections are stacked to indicate | |
| * different usages for the report and the field, in which | |
| * case we want the usage of the parent. However, Linux HID | |
| * implementation hides this fact, so we have to dig it up | |
| * ourselves | |
| */ | |
| i = report->field[0]->usage[0].collection_index; | |
| if (i <= 0 || | |
| hid->collection[i - 1].type != HID_COLLECTION_LOGICAL) | |
| continue; | |
| ret = pidff_check_usage(hid->collection[i - 1].usage); | |
| if (ret != -1 && !pidff->reports[ret]) { | |
| hid_dbg(hid, | |
| "found usage 0x%02x from collection array\n", | |
| pidff_reports[ret]); | |
| pidff->reports[ret] = report; | |
| } | |
| } | |
| } | |
| /* | |
| * Test if the required reports have been found | |
| */ | |
| static int pidff_reports_ok(struct pidff_device *pidff) | |
| { | |
| for (int i = 0; i < PID_REQUIRED_REPORTS; i++) { | |
| if (!pidff->reports[i]) { | |
| hid_dbg(pidff->hid, "%d missing\n", i); | |
| return 0; | |
| } | |
| } | |
| return 1; | |
| } | |
| /* | |
| * Find a field with a specific usage within a report | |
| */ | |
| static struct hid_field *pidff_find_special_field(struct hid_report *report, | |
| int usage, int enforce_min) | |
| { | |
| if (!report) { | |
| pr_debug("%s, null report\n", __func__); | |
| return NULL; | |
| } | |
| for (int i = 0; i < report->maxfield; i++) { | |
| if (report->field[i]->logical == (HID_UP_PID | usage) && | |
| report->field[i]->report_count > 0) { | |
| if (!enforce_min || | |
| report->field[i]->logical_minimum == 1) | |
| return report->field[i]; | |
| pr_err("logical_minimum is not 1 as it should be\n"); | |
| return NULL; | |
| } | |
| } | |
| return NULL; | |
| } | |
| /* | |
| * Fill a pidff->*_id struct table | |
| */ | |
| static int pidff_find_special_keys(int *keys, struct hid_field *fld, | |
| const u8 *usagetable, int count, | |
| unsigned int usage_page) | |
| { | |
| int found = 0; | |
| if (!fld) | |
| return 0; | |
| for (int i = 0; i < count; i++) { | |
| keys[i] = pidff_find_usage(fld, usage_page | usagetable[i]) + 1; | |
| if (keys[i]) | |
| found++; | |
| } | |
| return found; | |
| } | |
| #define PIDFF_FIND_SPECIAL_KEYS(keys, field, name) \ | |
| pidff_find_special_keys(pidff->keys, pidff->field, pidff_ ## name, \ | |
| ARRAY_SIZE(pidff_ ## name), HID_UP_PID) | |
| #define PIDFF_FIND_GENERAL_DESKTOP(keys, field, name) \ | |
| pidff_find_special_keys(pidff->keys, pidff->field, pidff_ ## name, \ | |
| ARRAY_SIZE(pidff_ ## name), HID_UP_GENDESK) | |
| /* | |
| * Find and check the special fields | |
| */ | |
| static int pidff_find_special_fields(struct pidff_device *pidff) | |
| { | |
| hid_dbg(pidff->hid, "finding special fields\n"); | |
| pidff->create_new_effect_type = | |
| pidff_find_special_field(pidff->reports[PID_CREATE_NEW_EFFECT], | |
| PID_EFFECT_TYPE, 1); | |
| pidff->set_effect_type = | |
| pidff_find_special_field(pidff->reports[PID_SET_EFFECT], | |
| PID_EFFECT_TYPE, 1); | |
| pidff->axes_enable = | |
| pidff_find_special_field(pidff->reports[PID_SET_EFFECT], | |
| PID_AXES_ENABLE, 0); | |
| pidff->effect_direction = | |
| pidff_find_special_field(pidff->reports[PID_SET_EFFECT], | |
| PID_DIRECTION, 0); | |
| pidff->device_control = | |
| pidff_find_special_field(pidff->reports[PID_DEVICE_CONTROL], | |
| PID_DEVICE_CONTROL_ARRAY, 1); | |
| /* Detect and set permissive control quirk */ | |
| if (!pidff->device_control) { | |
| pr_debug("Setting PERMISSIVE_CONTROL quirk\n"); | |
| pidff->quirks |= HID_PIDFF_QUIRK_PERMISSIVE_CONTROL; | |
| pidff->device_control = pidff_find_special_field( | |
| pidff->reports[PID_DEVICE_CONTROL], | |
| PID_DEVICE_CONTROL_ARRAY, 0); | |
| } | |
| pidff->block_load_status = | |
| pidff_find_special_field(pidff->reports[PID_BLOCK_LOAD], | |
| PID_BLOCK_LOAD_STATUS, 1); | |
| pidff->effect_operation_status = | |
| pidff_find_special_field(pidff->reports[PID_EFFECT_OPERATION], | |
| PID_EFFECT_OPERATION_ARRAY, 1); | |
| hid_dbg(pidff->hid, "search done\n"); | |
| if (!pidff->create_new_effect_type || !pidff->set_effect_type) { | |
| hid_err(pidff->hid, "effect lists not found\n"); | |
| return -1; | |
| } | |
| if (!pidff->effect_direction) { | |
| hid_err(pidff->hid, "direction field not found\n"); | |
| return -1; | |
| } | |
| if (!pidff->device_control) { | |
| hid_err(pidff->hid, "device control field not found\n"); | |
| return -1; | |
| } | |
| if (!pidff->block_load_status) { | |
| hid_err(pidff->hid, "block load status field not found\n"); | |
| return -1; | |
| } | |
| if (!pidff->effect_operation_status) { | |
| hid_err(pidff->hid, "effect operation field not found\n"); | |
| return -1; | |
| } | |
| PIDFF_FIND_SPECIAL_KEYS(control_id, device_control, device_control); | |
| if (!PIDFF_FIND_SPECIAL_KEYS(type_id, create_new_effect_type, | |
| effect_types)) { | |
| hid_err(pidff->hid, "no effect types found\n"); | |
| return -1; | |
| } | |
| if (PIDFF_FIND_SPECIAL_KEYS(status_id, block_load_status, | |
| block_load_status) != | |
| ARRAY_SIZE(pidff_block_load_status)) { | |
| hid_err(pidff->hid, | |
| "block load status identifiers not found\n"); | |
| return -1; | |
| } | |
| if (PIDFF_FIND_SPECIAL_KEYS(operation_id, effect_operation_status, | |
| effect_operation_status) != | |
| ARRAY_SIZE(pidff_effect_operation_status)) { | |
| hid_err(pidff->hid, "effect operation identifiers not found\n"); | |
| return -1; | |
| } | |
| if (!pidff->axes_enable) { | |
| hid_info(pidff->hid, "axes enable field not found!\n"); | |
| return 0; | |
| } | |
| hid_dbg(pidff->hid, "axes enable report count: %u\n", | |
| pidff->axes_enable->report_count); | |
| uint found = PIDFF_FIND_GENERAL_DESKTOP(direction_axis_id, axes_enable, | |
| direction_axis); | |
| pidff->axis_count = found; | |
| hid_dbg(pidff->hid, "found direction axes: %u", found); | |
| for (int i = 0; i < ARRAY_SIZE(pidff_direction_axis); i++) { | |
| if (!pidff->direction_axis_id[i]) | |
| continue; | |
| hid_dbg(pidff->hid, "axis %d, usage: 0x%04x, index: %d", i + 1, | |
| pidff_direction_axis[i], pidff->direction_axis_id[i]); | |
| } | |
| if (pidff->axes_enable && found != pidff->axes_enable->report_count) | |
| hid_warn(pidff->hid, "axes_enable: %u != direction axes: %u", | |
| pidff->axes_enable->report_count, found); | |
| return 0; | |
| } | |
| /* | |
| * Find the implemented effect types | |
| */ | |
| static int pidff_find_effects(struct pidff_device *pidff, | |
| struct input_dev *dev) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(pidff_effect_types); i++) { | |
| int pidff_type = pidff->type_id[i]; | |
| if (pidff->set_effect_type->usage[pidff_type].hid != | |
| pidff->create_new_effect_type->usage[pidff_type].hid) { | |
| hid_err(pidff->hid, | |
| "effect type number %d is invalid\n", i); | |
| return -1; | |
| } | |
| } | |
| if (pidff->type_id[PID_CONSTANT]) | |
| set_bit(FF_CONSTANT, dev->ffbit); | |
| if (pidff->type_id[PID_RAMP]) | |
| set_bit(FF_RAMP, dev->ffbit); | |
| if (pidff->type_id[PID_SQUARE]) { | |
| set_bit(FF_SQUARE, dev->ffbit); | |
| set_bit(FF_PERIODIC, dev->ffbit); | |
| } | |
| if (pidff->type_id[PID_SINE]) { | |
| set_bit(FF_SINE, dev->ffbit); | |
| set_bit(FF_PERIODIC, dev->ffbit); | |
| } | |
| if (pidff->type_id[PID_TRIANGLE]) { | |
| set_bit(FF_TRIANGLE, dev->ffbit); | |
| set_bit(FF_PERIODIC, dev->ffbit); | |
| } | |
| if (pidff->type_id[PID_SAW_UP]) { | |
| set_bit(FF_SAW_UP, dev->ffbit); | |
| set_bit(FF_PERIODIC, dev->ffbit); | |
| } | |
| if (pidff->type_id[PID_SAW_DOWN]) { | |
| set_bit(FF_SAW_DOWN, dev->ffbit); | |
| set_bit(FF_PERIODIC, dev->ffbit); | |
| } | |
| if (pidff->type_id[PID_SPRING]) | |
| set_bit(FF_SPRING, dev->ffbit); | |
| if (pidff->type_id[PID_DAMPER]) | |
| set_bit(FF_DAMPER, dev->ffbit); | |
| if (pidff->type_id[PID_INERTIA]) | |
| set_bit(FF_INERTIA, dev->ffbit); | |
| if (pidff->type_id[PID_FRICTION]) | |
| set_bit(FF_FRICTION, dev->ffbit); | |
| return 0; | |
| } | |
| #define PIDFF_FIND_FIELDS(name, report, strict) \ | |
| pidff_find_fields(pidff->name, pidff_ ## name, \ | |
| pidff->reports[report], \ | |
| ARRAY_SIZE(pidff_ ## name), strict, &pidff->quirks) | |
| /* | |
| * Fill and check the pidff_usages | |
| */ | |
| static int pidff_init_fields(struct pidff_device *pidff, struct input_dev *dev) | |
| { | |
| if (PIDFF_FIND_FIELDS(set_effect, PID_SET_EFFECT, 1)) { | |
| hid_err(pidff->hid, "unknown set_effect report layout\n"); | |
| return -ENODEV; | |
| } | |
| PIDFF_FIND_FIELDS(block_load, PID_BLOCK_LOAD, 0); | |
| if (!pidff->block_load[PID_EFFECT_BLOCK_INDEX].value) { | |
| hid_err(pidff->hid, "unknown pid_block_load report layout\n"); | |
| return -ENODEV; | |
| } | |
| if (PIDFF_FIND_FIELDS(effect_operation, PID_EFFECT_OPERATION, 1)) { | |
| hid_err(pidff->hid, "unknown effect_operation report layout\n"); | |
| return -ENODEV; | |
| } | |
| if (PIDFF_FIND_FIELDS(block_free, PID_BLOCK_FREE, 1)) { | |
| hid_err(pidff->hid, "unknown pid_block_free report layout\n"); | |
| return -ENODEV; | |
| } | |
| if (pidff_find_special_fields(pidff) || pidff_find_effects(pidff, dev)) | |
| return -ENODEV; | |
| if (PIDFF_FIND_FIELDS(set_envelope, PID_SET_ENVELOPE, 1)) { | |
| if (test_and_clear_bit(FF_CONSTANT, dev->ffbit)) | |
| hid_warn(pidff->hid, | |
| "has constant effect but no envelope\n"); | |
| if (test_and_clear_bit(FF_RAMP, dev->ffbit)) | |
| hid_warn(pidff->hid, | |
| "has ramp effect but no envelope\n"); | |
| if (test_and_clear_bit(FF_PERIODIC, dev->ffbit)) | |
| hid_warn(pidff->hid, | |
| "has periodic effect but no envelope\n"); | |
| } | |
| if (PIDFF_FIND_FIELDS(set_constant, PID_SET_CONSTANT, 1) && | |
| test_and_clear_bit(FF_CONSTANT, dev->ffbit)) | |
| hid_warn(pidff->hid, "unknown constant effect layout\n"); | |
| if (PIDFF_FIND_FIELDS(set_ramp, PID_SET_RAMP, 1) && | |
| test_and_clear_bit(FF_RAMP, dev->ffbit)) | |
| hid_warn(pidff->hid, "unknown ramp effect layout\n"); | |
| if (PIDFF_FIND_FIELDS(set_condition, PID_SET_CONDITION, 1)) { | |
| bool test = false; | |
| test |= test_and_clear_bit(FF_SPRING, dev->ffbit); | |
| test |= test_and_clear_bit(FF_DAMPER, dev->ffbit); | |
| test |= test_and_clear_bit(FF_FRICTION, dev->ffbit); | |
| test |= test_and_clear_bit(FF_INERTIA, dev->ffbit); | |
| if (test) | |
| hid_warn(pidff->hid, "unknown condition effect layout\n"); | |
| } | |
| if (PIDFF_FIND_FIELDS(set_periodic, PID_SET_PERIODIC, 1) && | |
| test_and_clear_bit(FF_PERIODIC, dev->ffbit)) | |
| hid_warn(pidff->hid, "unknown periodic effect layout\n"); | |
| PIDFF_FIND_FIELDS(pool, PID_POOL, 0); | |
| if (!PIDFF_FIND_FIELDS(device_gain, PID_DEVICE_GAIN, 1)) | |
| set_bit(FF_GAIN, dev->ffbit); | |
| return 0; | |
| } | |
| /* | |
| * Test if autocenter modification is using the supported method | |
| */ | |
| static int pidff_check_autocenter(struct pidff_device *pidff, | |
| struct input_dev *dev) | |
| { | |
| int error; | |
| /* | |
| * Let's find out if autocenter modification is supported | |
| * Specification doesn't specify anything, so we request an | |
| * effect upload and cancel it immediately. If the approved | |
| * effect id was one above the minimum, then we assume the first | |
| * effect id is a built-in spring type effect used for autocenter | |
| */ | |
| error = pidff_request_effect_upload(pidff, 1); | |
| if (error) { | |
| hid_err(pidff->hid, "upload request failed\n"); | |
| return error; | |
| } | |
| if (pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0] == | |
| pidff->block_load[PID_EFFECT_BLOCK_INDEX].field->logical_minimum + 1) { | |
| pidff_autocenter(pidff, U16_MAX); | |
| set_bit(FF_AUTOCENTER, dev->ffbit); | |
| } else { | |
| hid_notice(pidff->hid, | |
| "device has unknown autocenter control method\n"); | |
| } | |
| pidff_erase_pid(pidff, | |
| pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0]); | |
| return 0; | |
| } | |
| /* | |
| * Check if the device is PID and initialize it | |
| * Set initial quirks | |
| */ | |
| int hid_pidff_init_with_quirks(struct hid_device *hid, u32 initial_quirks) | |
| { | |
| struct pidff_device *pidff; | |
| struct hid_input *hidinput; | |
| struct input_dev *dev; | |
| struct ff_device *ff; | |
| int max_effects; | |
| int error; | |
| if (list_empty(&hid->inputs)) { | |
| hid_err(hid, "no inputs found\n"); | |
| return -ENODEV; | |
| } | |
| hidinput = list_first_entry(&hid->inputs, struct hid_input, list); | |
| dev = hidinput->input; | |
| hid_dbg(hid, "starting pid init\n"); | |
| if (list_empty(&hid->report_enum[HID_OUTPUT_REPORT].report_list)) { | |
| hid_dbg(hid, "not a PID device, no output report\n"); | |
| return -ENODEV; | |
| } | |
| pidff = kzalloc_obj(*pidff); | |
| if (!pidff) | |
| return -ENOMEM; | |
| pidff->hid = hid; | |
| pidff->quirks = initial_quirks; | |
| pidff->effect_count = 0; | |
| hid_device_io_start(hid); | |
| pidff_find_reports(hid, HID_OUTPUT_REPORT, pidff); | |
| pidff_find_reports(hid, HID_FEATURE_REPORT, pidff); | |
| if (!pidff_reports_ok(pidff)) { | |
| hid_dbg(hid, "reports not ok, aborting\n"); | |
| error = -ENODEV; | |
| goto fail; | |
| } | |
| error = pidff_init_fields(pidff, dev); | |
| if (error) | |
| goto fail; | |
| /* pool report is sometimes messed up, refetch it */ | |
| pidff_fetch_pool(pidff); | |
| pidff_set_gain_report(pidff, U16_MAX); | |
| error = pidff_check_autocenter(pidff, dev); | |
| if (error) | |
| goto fail; | |
| max_effects = | |
| pidff->block_load[PID_EFFECT_BLOCK_INDEX].field->logical_maximum - | |
| pidff->block_load[PID_EFFECT_BLOCK_INDEX].field->logical_minimum + | |
| 1; | |
| hid_dbg(hid, "max effects is %d\n", max_effects); | |
| if (max_effects > PID_EFFECTS_MAX) | |
| max_effects = PID_EFFECTS_MAX; | |
| if (pidff->pool[PID_SIMULTANEOUS_MAX].value) | |
| hid_dbg(hid, "max simultaneous effects is %d\n", | |
| pidff->pool[PID_SIMULTANEOUS_MAX].value[0]); | |
| if (pidff->pool[PID_RAM_POOL_SIZE].value) | |
| hid_dbg(hid, "device memory size is %d bytes\n", | |
| pidff->pool[PID_RAM_POOL_SIZE].value[0]); | |
| if (pidff->pool[PID_DEVICE_MANAGED_POOL].value && | |
| pidff->pool[PID_DEVICE_MANAGED_POOL].value[0] == 0) { | |
| error = -EPERM; | |
| hid_notice(hid, | |
| "device does not support device managed pool\n"); | |
| goto fail; | |
| } | |
| error = input_ff_create(dev, max_effects); | |
| if (error) | |
| goto fail; | |
| ff = dev->ff; | |
| ff->private = pidff; | |
| ff->upload = pidff_upload_effect; | |
| ff->erase = pidff_erase_effect; | |
| ff->set_gain = pidff_set_gain; | |
| ff->set_autocenter = pidff_set_autocenter; | |
| ff->playback = pidff_playback; | |
| hid_info(dev, "Force feedback for USB HID PID devices by Anssi Hannula\n"); | |
| hid_dbg(dev, "Active quirks mask: 0x%08x\n", pidff->quirks); | |
| hid_device_io_stop(hid); | |
| return 0; | |
| fail: | |
| hid_device_io_stop(hid); | |
| kfree(pidff); | |
| return error; | |
| } | |
| EXPORT_SYMBOL_GPL(hid_pidff_init_with_quirks); | |
| /* | |
| * Check if the device is PID and initialize it | |
| * Wrapper made to keep the compatibility with old | |
| * init function | |
| */ | |
| int hid_pidff_init(struct hid_device *hid) | |
| { | |
| return hid_pidff_init_with_quirks(hid, 0); | |
| } |