| # SPDX-License-Identifier: GPL-2.0-only | |
| # | |
| # Hardware monitoring chip drivers configuration | |
| # | |
| menuconfig HWMON | |
| tristate "Hardware Monitoring support" | |
| depends on HAS_IOMEM | |
| default y | |
| help | |
| Hardware monitoring devices let you monitor the hardware health | |
| of a system. Most modern motherboards include such a device. It | |
| can include temperature sensors, voltage sensors, fan speed | |
| sensors and various additional features such as the ability to | |
| control the speed of the fans. If you want this support you | |
| should say Y here and also to the specific driver(s) for your | |
| sensors chip(s) below. | |
| To find out which specific driver(s) you need, use the | |
| sensors-detect script from the lm_sensors package. Read | |
| <file:Documentation/hwmon/userspace-tools.rst> for details. | |
| This support can also be built as a module. If so, the module | |
| will be called hwmon. | |
| if HWMON | |
| config HWMON_VID | |
| tristate | |
| config HWMON_DEBUG_CHIP | |
| bool "Hardware Monitoring Chip debugging messages" | |
| help | |
| Say Y here if you want the I2C chip drivers to produce a bunch of | |
| debug messages to the system log. Select this if you are having | |
| a problem with I2C support and want to see more of what is going | |
| on. | |
| comment "Native drivers" | |
| config SENSORS_ABITUGURU | |
| tristate "Abit uGuru (rev 1 & 2)" | |
| depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT | |
| help | |
| If you say yes here you get support for the sensor part of the first | |
| and second revision of the Abit uGuru chip. The voltage and frequency | |
| control parts of the Abit uGuru are not supported. The Abit uGuru | |
| chip can be found on Abit uGuru featuring motherboards (most modern | |
| Abit motherboards from before end 2005). For more info and a list | |
| of which motherboards have which revision see | |
| Documentation/hwmon/abituguru.rst | |
| This driver can also be built as a module. If so, the module | |
| will be called abituguru. | |
| config SENSORS_ABITUGURU3 | |
| tristate "Abit uGuru (rev 3)" | |
| depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT | |
| help | |
| If you say yes here you get support for the sensor part of the | |
| third revision of the Abit uGuru chip. Only reading the sensors | |
| and their settings is supported. The third revision of the Abit | |
| uGuru chip can be found on recent Abit motherboards (since end | |
| 2005). For more info and a list of which motherboards have which | |
| revision see Documentation/hwmon/abituguru3.rst | |
| This driver can also be built as a module. If so, the module | |
| will be called abituguru3. | |
| config SENSORS_SMPRO | |
| tristate "Ampere's Altra SMpro hardware monitoring driver" | |
| depends on MFD_SMPRO | |
| help | |
| If you say yes here you get support for the thermal, voltage, | |
| current and power sensors of Ampere's Altra processor family SoC | |
| with SMpro co-processor. | |
| config SENSORS_AD7314 | |
| tristate "Analog Devices AD7314 and compatibles" | |
| depends on SPI | |
| help | |
| If you say yes here you get support for the Analog Devices | |
| AD7314, ADT7301 and ADT7302 temperature sensors. | |
| This driver can also be built as a module. If so, the module | |
| will be called ad7314. | |
| config SENSORS_AD7414 | |
| tristate "Analog Devices AD7414" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Analog Devices | |
| AD7414 temperature monitoring chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called ad7414. | |
| config SENSORS_AD7418 | |
| tristate "Analog Devices AD7416, AD7417 and AD7418" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Analog Devices | |
| AD7416, AD7417 and AD7418 temperature monitoring chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called ad7418. | |
| config SENSORS_ADM1025 | |
| tristate "Analog Devices ADM1025 and compatibles" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for Analog Devices ADM1025 | |
| and Philips NE1619 sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called adm1025. | |
| config SENSORS_ADM1026 | |
| tristate "Analog Devices ADM1026 and compatibles" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for Analog Devices ADM1026 | |
| sensor chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called adm1026. | |
| config SENSORS_ADM1029 | |
| tristate "Analog Devices ADM1029" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Analog Devices ADM1029 | |
| sensor chip. | |
| Very rare chip, please let us know you use it. | |
| This driver can also be built as a module. If so, the module | |
| will be called adm1029. | |
| config SENSORS_ADM1031 | |
| tristate "Analog Devices ADM1031 and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Analog Devices ADM1031 | |
| and ADM1030 sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called adm1031. | |
| config SENSORS_ADM1177 | |
| tristate "Analog Devices ADM1177 and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Analog Devices ADM1177 | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called adm1177. | |
| config SENSORS_ADM9240 | |
| tristate "Analog Devices ADM9240 and compatibles" | |
| depends on I2C | |
| select HWMON_VID | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for Analog Devices ADM9240, | |
| Dallas DS1780, National Semiconductor LM81 sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called adm9240. | |
| config SENSORS_ADT7X10 | |
| tristate | |
| select REGMAP | |
| help | |
| This module contains common code shared by the ADT7310/ADT7320 and | |
| ADT7410/ADT7420/ADT7422 temperature monitoring chip drivers. | |
| If built as a module, the module will be called adt7x10. | |
| config SENSORS_ADT7310 | |
| tristate "Analog Devices ADT7310/ADT7320" | |
| depends on SPI_MASTER | |
| select SENSORS_ADT7X10 | |
| help | |
| If you say yes here you get support for the Analog Devices | |
| ADT7310 and ADT7320 temperature monitoring chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called adt7310. | |
| config SENSORS_ADT7410 | |
| tristate "Analog Devices ADT7410/ADT7420/ADT7422" | |
| depends on I2C | |
| select SENSORS_ADT7X10 | |
| help | |
| If you say yes here you get support for the Analog Devices | |
| ADT7410, ADT7420 and ADT7422 temperature monitoring chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called adt7410. | |
| config SENSORS_ADT7411 | |
| tristate "Analog Devices ADT7411" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Analog Devices | |
| ADT7411 voltage and temperature monitoring chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called adt7411. | |
| config SENSORS_ADT7462 | |
| tristate "Analog Devices ADT7462" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Analog Devices | |
| ADT7462 temperature monitoring chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called adt7462. | |
| config SENSORS_ADT7470 | |
| tristate "Analog Devices ADT7470" | |
| depends on I2C | |
| depends on PWM || PWM=n | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for the Analog Devices | |
| ADT7470 temperature monitoring chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called adt7470. | |
| config SENSORS_ADT7475 | |
| tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the Analog Devices | |
| ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring | |
| chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called adt7475. | |
| config SENSORS_AHT10 | |
| tristate "Aosong AHT10, AHT20, DHT20" | |
| depends on I2C | |
| select CRC8 | |
| help | |
| If you say yes here, you get support for the Aosong AHT10, AHT20 and | |
| DHT20 temperature and humidity sensors | |
| This driver can also be built as a module. If so, the module | |
| will be called aht10. | |
| config SENSORS_AQUACOMPUTER_D5NEXT | |
| tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, Farbwerk 360, High Flow Next" | |
| depends on USB_HID | |
| select CRC16 | |
| help | |
| If you say yes here you get support for sensors and fans of | |
| the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan | |
| controllers, Farbwerk and Farbwerk 360 RGB controllers, High Flow | |
| Next sensor, where available. | |
| This driver can also be built as a module. If so, the module | |
| will be called aquacomputer_d5next. | |
| config SENSORS_AS370 | |
| tristate "Synaptics AS370 SoC hardware monitoring driver" | |
| help | |
| If you say yes here you get support for the PVT sensors of | |
| the Synaptics AS370 SoC | |
| This driver can also be built as a module. If so, the module | |
| will be called as370-hwmon. | |
| config SENSORS_ASC7621 | |
| tristate "Andigilog aSC7621" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the aSC7621 | |
| family of SMBus sensors chip found on most Intel X38, X48, X58, | |
| 945, 965 and 975 desktop boards. Currently supported chips: | |
| aSC7621 | |
| aSC7621a | |
| This driver can also be built as a module. If so, the module | |
| will be called asc7621. | |
| config SENSORS_ASUS_ROG_RYUJIN | |
| tristate "ASUS ROG RYUJIN hardware monitoring driver" | |
| depends on HID | |
| help | |
| If you say yes here you get support for the fans and sensors of | |
| supported ASUS ROG RYUJIN II and III AIO CPU liquid coolers. | |
| This driver can also be built as a module. If so, the module | |
| will be called asus_rog_ryujin. | |
| config SENSORS_AXI_FAN_CONTROL | |
| tristate "Analog Devices FAN Control HDL Core driver" | |
| help | |
| If you say yes here you get support for the Analog Devices | |
| AXI HDL FAN monitoring core. | |
| This driver can also be built as a module. If so, the module | |
| will be called axi-fan-control | |
| config SENSORS_K8TEMP | |
| tristate "AMD Athlon64/FX or Opteron temperature sensor" | |
| depends on X86 && PCI | |
| help | |
| If you say yes here you get support for the temperature | |
| sensor(s) inside your CPU. Supported is whole AMD K8 | |
| microarchitecture. Please note that you will need at least | |
| lm-sensors 2.10.1 for proper userspace support. | |
| This driver can also be built as a module. If so, the module | |
| will be called k8temp. | |
| config SENSORS_K10TEMP | |
| tristate "AMD Family 10h+ temperature sensor" | |
| depends on X86 && PCI && AMD_NODE | |
| help | |
| If you say yes here you get support for the temperature | |
| sensor(s) inside your CPU. Supported are later revisions of | |
| the AMD Family 10h and all revisions of the AMD Family 11h, | |
| 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo) | |
| and 16h (Kabini/Mullins) microarchitectures. | |
| This driver can also be built as a module. If so, the module | |
| will be called k10temp. | |
| config SENSORS_KB9002 | |
| tristate "Kandou KB9002 PCIe retimer" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the integrated | |
| temperature sensor and firmware version readout on Kandou | |
| KB9002 PCIe 5.0 retimers, accessed over SMBus. | |
| This driver can also be built as a module. If so, the module | |
| will be called kb9002. | |
| config SENSORS_KBATT | |
| tristate "KEBA battery controller support" | |
| depends on KEBA_CP500 | |
| help | |
| This driver supports the battery monitoring controller found in | |
| KEBA system FPGA devices. | |
| This driver can also be built as a module. If so, the module | |
| will be called kbatt. | |
| config SENSORS_KFAN | |
| tristate "KEBA fan controller support" | |
| depends on KEBA_CP500 | |
| help | |
| This driver supports the fan controller found in KEBA system | |
| FPGA devices. | |
| This driver can also be built as a module. If so, the module | |
| will be called kfan. | |
| config SENSORS_FAM15H_POWER | |
| tristate "AMD Family 15h processor power" | |
| depends on X86 && PCI && CPU_SUP_AMD | |
| help | |
| If you say yes here you get support for processor power | |
| information of your AMD family 15h CPU. | |
| This driver can also be built as a module. If so, the module | |
| will be called fam15h_power. | |
| config SENSORS_APPLESMC | |
| tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" | |
| depends on INPUT && X86 | |
| select NEW_LEDS | |
| select LEDS_CLASS | |
| help | |
| This driver provides support for the Apple System Management | |
| Controller, which provides an accelerometer (Apple Sudden Motion | |
| Sensor), light sensors, temperature sensors, keyboard backlight | |
| control and fan control. | |
| Only Intel-based Apple's computers are supported (MacBook Pro, | |
| MacBook, MacMini). | |
| Data from the different sensors, keyboard backlight control and fan | |
| control are accessible via sysfs. | |
| This driver also provides an absolute input class device, allowing | |
| the laptop to act as a pinball machine-esque joystick. | |
| Say Y here if you have an applicable laptop and want to experience | |
| the awesome power of applesmc. | |
| config SENSORS_ARCTIC_FAN_CONTROLLER | |
| tristate "ARCTIC Fan Controller" | |
| depends on USB_HID | |
| help | |
| If you say yes here you get support for the ARCTIC Fan Controller, | |
| a USB HID device (VID 0x3904, PID 0xF001) with 10 fan channels. | |
| The driver exposes fan speed (RPM) and PWM control via the hwmon | |
| sysfs interface. | |
| This driver can also be built as a module. If so, the module | |
| will be called arctic_fan_controller. | |
| config SENSORS_ARM_SCMI | |
| tristate "ARM SCMI Sensors" | |
| depends on ARM_SCMI_PROTOCOL | |
| help | |
| This driver provides support for temperature, voltage, current | |
| and power sensors available on SCMI based platforms. The actual | |
| number and type of sensors exported depend on the platform. | |
| This driver can also be built as a module. If so, the module | |
| will be called scmi-hwmon. | |
| config SENSORS_ARM_SCPI | |
| tristate "ARM SCPI Sensors" | |
| depends on ARM_SCPI_PROTOCOL | |
| help | |
| This driver provides support for temperature, voltage, current | |
| and power sensors available on ARM Ltd's SCP based platforms. The | |
| actual number and type of sensors exported depend on the platform. | |
| config SENSORS_ASB100 | |
| tristate "Asus ASB100 Bach" | |
| depends on (X86 || COMPILE_TEST) && I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the ASB100 Bach sensor | |
| chip found on some Asus mainboards. | |
| This driver can also be built as a module. If so, the module | |
| will be called asb100. | |
| config SENSORS_ASPEED | |
| tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver" | |
| depends on ARCH_ASPEED || COMPILE_TEST | |
| select REGMAP | |
| help | |
| This driver provides support for ASPEED AST2400/AST2500 PWM | |
| and Fan Tacho controllers. | |
| This driver can also be built as a module. If so, the module | |
| will be called aspeed_pwm_tacho. | |
| config SENSORS_ASPEED_G6 | |
| tristate "ASPEED G6 PWM and Fan tach driver" | |
| depends on ARCH_ASPEED || COMPILE_TEST | |
| depends on PWM | |
| help | |
| This driver provides support for ASPEED G6 PWM and Fan Tach | |
| controllers. | |
| This driver can also be built as a module. If so, the module | |
| will be called aspeed_g6_pwm_tach. | |
| config SENSORS_ATXP1 | |
| tristate "Attansic ATXP1 VID controller" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the Attansic ATXP1 VID | |
| controller. | |
| If your board have such a chip, you are able to control your CPU | |
| core and other voltages. | |
| This driver can also be built as a module. If so, the module | |
| will be called atxp1. | |
| config SENSORS_CGBC | |
| tristate "Congatec Board Controller Sensors" | |
| depends on MFD_CGBC | |
| help | |
| Enable sensors support for the Congatec Board Controller. It has | |
| temperature, voltage, current and fan sensors. | |
| This driver can also be built as a module. If so, the module will be | |
| called cgbc-hwmon. | |
| config SENSORS_CHIPCAP2 | |
| tristate "Amphenol ChipCap 2 relative humidity and temperature sensor" | |
| depends on I2C | |
| help | |
| Say yes here to build support for the Amphenol ChipCap 2 | |
| relative humidity and temperature sensor. | |
| To compile this driver as a module, choose M here: the module | |
| will be called chipcap2. | |
| config SENSORS_CORSAIR_CPRO | |
| tristate "Corsair Commander Pro controller" | |
| depends on HID | |
| help | |
| If you say yes here you get support for the Corsair Commander Pro | |
| controller. | |
| This driver can also be built as a module. If so, the module | |
| will be called corsair-cpro. | |
| config SENSORS_CORSAIR_PSU | |
| tristate "Corsair PSU HID controller" | |
| depends on HID | |
| help | |
| If you say yes here you get support for Corsair PSUs with a HID | |
| interface. | |
| Currently this driver supports the (RM/HX)550i, (RM/HX)650i, | |
| (RM/HX)750i, (RM/HX)850i, (RM/HX)1000i, HX1200i and HX1500i power | |
| supplies by Corsair. | |
| This driver can also be built as a module. If so, the module | |
| will be called corsair-psu. | |
| config SENSORS_CROS_EC | |
| tristate "ChromeOS Embedded Controller sensors" | |
| depends on MFD_CROS_EC_DEV | |
| default MFD_CROS_EC_DEV | |
| help | |
| If you say yes here you get support for ChromeOS Embedded Controller | |
| sensors. | |
| This driver can also be built as a module. If so, the module | |
| will be called cros_ec_hwmon. | |
| config SENSORS_DRIVETEMP | |
| tristate "Hard disk drives with temperature sensors" | |
| depends on SCSI && ATA | |
| help | |
| If you say yes you get support for the temperature sensor on | |
| hard disk drives. | |
| This driver can also be built as a module. If so, the module | |
| will be called drivetemp. | |
| config SENSORS_DS620 | |
| tristate "Dallas Semiconductor DS620" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Dallas Semiconductor | |
| DS620 sensor chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called ds620. | |
| config SENSORS_DS1621 | |
| tristate "Dallas Semiconductor DS1621 and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Dallas Semiconductor/Maxim | |
| Integrated DS1621 sensor chips and compatible models including: | |
| - Dallas Semiconductor DS1625 | |
| - Maxim Integrated DS1631 | |
| - Maxim Integrated DS1721 | |
| - Maxim Integrated DS1731 | |
| This driver can also be built as a module. If so, the module | |
| will be called ds1621. | |
| config SENSORS_DELL_SMM | |
| tristate "Dell laptop SMM BIOS hwmon driver" | |
| depends on ACPI_WMI | |
| depends on X86 | |
| imply THERMAL | |
| help | |
| This hwmon driver adds support for reporting temperature of different | |
| sensors and controls the fans on Dell laptops via System Management | |
| Mode provided by Dell BIOS. | |
| When option I8K is also enabled this driver provides legacy /proc/i8k | |
| userspace interface for i8kutils package. | |
| config I8K | |
| bool "Legacy /proc/i8k interface of Dell laptop SMM BIOS hwmon driver" | |
| depends on SENSORS_DELL_SMM | |
| depends on PROC_FS | |
| help | |
| This option enables the legacy /proc/i8k userspace interface of the | |
| dell-smm-hwmon driver. The character file /proc/i8k exposes the BIOS | |
| version, temperatures and allows control of fan speeds of some Dell | |
| laptops. Sometimes it also reports power and hotkey status. | |
| This interface is required to run programs from the i8kutils package. | |
| Say Y if you intend to run userspace programs that use this interface. | |
| Say N otherwise. | |
| config SENSORS_DA9052_ADC | |
| tristate "Dialog DA9052/DA9053 ADC" | |
| depends on PMIC_DA9052 | |
| help | |
| Say y here to support the ADC found on Dialog Semiconductor | |
| DA9052-BC and DA9053-AA/Bx PMICs. | |
| This driver can also be built as module. If so, the module | |
| will be called da9052-hwmon. | |
| config SENSORS_DA9055 | |
| tristate "Dialog Semiconductor DA9055 ADC" | |
| depends on MFD_DA9055 | |
| help | |
| If you say yes here you get support for ADC on the Dialog | |
| Semiconductor DA9055 PMIC. | |
| This driver can also be built as a module. If so, the module | |
| will be called da9055-hwmon. | |
| config SENSORS_I5K_AMB | |
| tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" | |
| depends on PCI | |
| help | |
| If you say yes here you get support for FB-DIMM AMB temperature | |
| monitoring chips on systems with the Intel 5000 series chipset. | |
| This driver can also be built as a module. If so, the module | |
| will be called i5k_amb. | |
| config SENSORS_SPARX5 | |
| tristate "Sparx5 SoC temperature sensor" | |
| depends on ARCH_SPARX5 || ARCH_LAN969X || COMPILE_TEST | |
| help | |
| If you say yes here you get support for temperature monitoring | |
| with the Microchip Sparx5 SoC. | |
| This driver can also be built as a module. If so, the module | |
| will be called sparx5-temp. | |
| config SENSORS_F71805F | |
| tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" | |
| depends on HAS_IOPORT | |
| depends on !PPC | |
| help | |
| If you say yes here you get support for hardware monitoring | |
| features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG | |
| Super-I/O chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called f71805f. | |
| config SENSORS_F71882FG | |
| tristate "Fintek F71882FG and compatibles" | |
| depends on HAS_IOPORT | |
| depends on !PPC | |
| help | |
| If you say yes here you get support for hardware monitoring | |
| features of many Fintek Super-I/O (LPC) chips. The currently | |
| supported chips are: | |
| F71808E/A | |
| F71858FG | |
| F71862FG | |
| F71863FG | |
| F71869F/E/A | |
| F71882FG | |
| F71883FG | |
| F71889FG/ED/A | |
| F8000 | |
| F81801U | |
| F81865F | |
| This driver can also be built as a module. If so, the module | |
| will be called f71882fg. | |
| config SENSORS_F75375S | |
| tristate "Fintek F75375S/SP, F75373 and F75387" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for hardware monitoring | |
| features of the Fintek F75375S/SP, F75373 and F75387 | |
| This driver can also be built as a module. If so, the module | |
| will be called f75375s. | |
| config SENSORS_GSC | |
| tristate "Gateworks System Controller ADC" | |
| depends on MFD_GATEWORKS_GSC | |
| help | |
| Support for the Gateworks System Controller A/D converters. | |
| To compile this driver as a module, choose M here: | |
| the module will be called gsc-hwmon. | |
| config SENSORS_MC13783_ADC | |
| tristate "Freescale MC13783/MC13892 ADC" | |
| depends on MFD_MC13XXX | |
| help | |
| Support for the A/D converter on MC13783 and MC13892 PMIC. | |
| config SENSORS_MC33XS2410 | |
| tristate "MC33XS2410 HWMON support" | |
| depends on PWM_MC33XS2410 | |
| help | |
| If you say yes here you get hardware monitoring support for | |
| MC33XS2410. | |
| This driver can also be built as a module. If so, the module | |
| will be called mc33xs2410_hwmon. | |
| config SENSORS_FSCHMD | |
| tristate "Fujitsu Siemens Computers sensor chips" | |
| depends on (X86 || COMPILE_TEST) && I2C | |
| help | |
| If you say yes here you get support for the following Fujitsu | |
| Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, | |
| Heimdall, Heracles, Hades and Syleus including support for the | |
| integrated watchdog. | |
| This is a merged driver for FSC sensor chips replacing the fscpos, | |
| fscscy and fscher drivers and adding support for several other FSC | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called fschmd. | |
| config SENSORS_FTSTEUTATES | |
| tristate "Fujitsu Technology Solutions sensor chip Teutates" | |
| depends on I2C && WATCHDOG | |
| select WATCHDOG_CORE | |
| help | |
| If you say yes here you get support for the Fujitsu Technology | |
| Solutions (FTS) sensor chip "Teutates" including support for | |
| the integrated watchdog. | |
| This driver can also be built as a module. If so, the module | |
| will be called ftsteutates. | |
| config SENSORS_GIGABYTE_WATERFORCE | |
| tristate "Gigabyte Waterforce X240/X280/X360 AIO CPU coolers" | |
| depends on USB_HID | |
| help | |
| If you say yes here you get support for hardware monitoring for the | |
| Gigabyte Waterforce X240/X280/X360 all-in-one CPU liquid coolers. | |
| This driver can also be built as a module. If so, the module | |
| will be called gigabyte_waterforce. | |
| config SENSORS_GL518SM | |
| tristate "Genesys Logic GL518SM" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Genesys Logic GL518SM | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called gl518sm. | |
| config SENSORS_GL520SM | |
| tristate "Genesys Logic GL520SM" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for Genesys Logic GL520SM | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called gl520sm. | |
| config SENSORS_GPD | |
| tristate "GPD handhelds" | |
| depends on X86 && DMI && HAS_IOPORT | |
| help | |
| If you say yes here you get support for fan readings and | |
| control over GPD handheld devices. | |
| Can also be built as a module. In that case it will be | |
| called gpd-fan. | |
| config SENSORS_G760A | |
| tristate "GMT G760A" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Global Mixed-mode | |
| Technology Inc G760A fan speed PWM controller chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called g760a. | |
| config SENSORS_G762 | |
| tristate "GMT G762 and G763" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Global Mixed-mode | |
| Technology Inc G762 and G763 fan speed PWM controller chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called g762. | |
| config SENSORS_GPIO_FAN | |
| tristate "GPIO fan" | |
| depends on GPIOLIB || COMPILE_TEST | |
| help | |
| If you say yes here you get support for fans connected to GPIO lines. | |
| This driver can also be built as a module. If so, the module | |
| will be called gpio-fan. | |
| config SENSORS_GXP_FAN_CTRL | |
| tristate "HPE GXP fan controller" | |
| depends on ARCH_HPE_GXP || COMPILE_TEST | |
| help | |
| If you say yes here you get support for GXP fan control functionality. | |
| The GXP controls fan function via the CPLD through the use of PWM | |
| registers. This driver enables pwm setting of the fans. | |
| config SENSORS_HIH6130 | |
| tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Honeywell Humidicon | |
| HIH-6130 and HIH-6131 Humidicon humidity sensors. | |
| This driver can also be built as a module. If so, the module | |
| will be called hih6130. | |
| config SENSORS_HS3001 | |
| tristate "Renesas HS3001 humidity and temperature sensors" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Renesas HS3001, | |
| to HS3004 humidity and temperature sensors. | |
| This driver can also be built as a module. If so, the module | |
| will be called hs3001. | |
| config SENSORS_HTU31 | |
| tristate "Measurement Specialties HTU31 humidity and temperature sensor" | |
| depends on I2C | |
| select CRC8 | |
| help | |
| If you say yes here you get support for the HTU31 humidity | |
| and temperature sensors. | |
| This driver can also be built as a module. If so, the module | |
| will be called htu31. | |
| config SENSORS_IBMAEM | |
| tristate "IBM Active Energy Manager temperature/power sensors and control" | |
| select IPMI_SI | |
| depends on IPMI_HANDLER | |
| help | |
| If you say yes here you get support for the temperature and | |
| power sensors and capping hardware in various IBM System X | |
| servers that support Active Energy Manager. This includes | |
| the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, | |
| and certain HC10/HS2x/LS2x/QS2x blades. | |
| This driver can also be built as a module. If so, the module | |
| will be called ibmaem. | |
| config SENSORS_IBMPEX | |
| tristate "IBM PowerExecutive temperature/power sensors" | |
| select IPMI_SI | |
| depends on IPMI_HANDLER | |
| help | |
| If you say yes here you get support for the temperature and | |
| power sensors in various IBM System X servers that support | |
| PowerExecutive. So far this includes the x3350, x3550, x3650, | |
| x3655, and x3755; the x3800, x3850, and x3950 models that have | |
| PCI Express; and some of the HS2x, LS2x, and QS2x blades. | |
| This driver can also be built as a module. If so, the module | |
| will be called ibmpex. | |
| config SENSORS_IBMPOWERNV | |
| tristate "IBM POWERNV platform sensors" | |
| depends on PPC_POWERNV | |
| default y | |
| help | |
| If you say yes here you get support for the temperature/fan/power | |
| sensors on your PowerNV platform. | |
| This driver can also be built as a module. If so, the module | |
| will be called ibmpowernv. | |
| config SENSORS_IIO_HWMON | |
| tristate "Hwmon driver that uses channels specified via iio maps" | |
| depends on IIO | |
| help | |
| This is a platform driver that in combination with a suitable | |
| map allows IIO devices to provide basic hwmon functionality | |
| for those channels specified in the map. This map can be provided | |
| either via platform data or the device tree bindings. | |
| config SENSORS_I5500 | |
| tristate "Intel 5500/5520/X58 temperature sensor" | |
| depends on X86 && PCI | |
| help | |
| If you say yes here you get support for the temperature | |
| sensor inside the Intel 5500, 5520 and X58 chipsets. | |
| This driver can also be built as a module. If so, the module | |
| will be called i5500_temp. | |
| config SENSORS_CORETEMP | |
| tristate "Intel Core/Core2/Atom temperature sensor" | |
| depends on X86 | |
| help | |
| If you say yes here you get support for the temperature | |
| sensor inside your CPU. Most of the family 6 CPUs | |
| are supported. Check Documentation/hwmon/coretemp.rst for details. | |
| config SENSORS_ISL28022 | |
| tristate "Renesas ISL28022" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for ISL28022 power monitor. | |
| Check Documentation/hwmon/isl28022.rst for details. | |
| This driver can also be built as a module. If so, the module | |
| will be called isl28022. | |
| config SENSORS_IT87 | |
| tristate "ITE IT87xx and compatibles" | |
| depends on HAS_IOPORT | |
| depends on !PPC | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F, | |
| IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E, | |
| IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, | |
| IT8603E, IT8620E, IT8623E, IT8628E, and IT8689E sensor chips, and | |
| the SiS950 clone. | |
| This driver can also be built as a module. If so, the module | |
| will be called it87. | |
| config SENSORS_JC42 | |
| tristate "JEDEC JC42.4 compliant memory module temperature sensors" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here, you get support for JEDEC JC42.4 compliant | |
| temperature sensors, which are used on many DDR3 memory modules for | |
| mobile devices and servers. Support will include, but not be limited | |
| to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, | |
| MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, | |
| STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001. | |
| This driver can also be built as a module. If so, the module | |
| will be called jc42. | |
| config SENSORS_POLARFIRE_SOC_TVS | |
| tristate "PolarFire SoC (MPFS) temperature and voltage sensor" | |
| depends on POLARFIRE_SOC_SYSCONS || COMPILE_TEST | |
| depends on MFD_SYSCON | |
| help | |
| This driver adds support for the PolarFire SoC (MPFS) Temperature and | |
| Voltage Sensor. | |
| To compile this driver as a module, choose M here. the | |
| module will be called tvs-mpfs. | |
| If unsure, say N. | |
| config SENSORS_POWERZ | |
| tristate "ChargerLAB POWER-Z USB-C tester" | |
| depends on USB | |
| help | |
| If you say yes here you get support for ChargerLAB POWER-Z series of | |
| USB-C charging testers. | |
| This driver can also be built as a module. If so, the module | |
| will be called powerz. | |
| config SENSORS_POWR1220 | |
| tristate "Lattice POWR1220 Power Monitoring" | |
| depends on I2C | |
| help | |
| If you say yes here you get access to the hardware monitoring | |
| functions of the Lattice POWR1220 isp Power Supply Monitoring, | |
| Sequencing and Margining Controller. | |
| This driver can also be built as a module. If so, the module | |
| will be called powr1220. | |
| config SENSORS_PROM21_XHCI | |
| tristate "AMD Promontory 21 xHCI temperature sensor" | |
| depends on USB_XHCI_PCI | |
| help | |
| If you say yes here you get support for the AMD Promontory 21 | |
| (PROM21) xHCI temperature sensor. | |
| This driver can also be built as a module. If so, the module | |
| will be called prom21-xhci. | |
| config SENSORS_LAN966X | |
| tristate "Microchip LAN966x Hardware Monitoring" | |
| depends on SOC_LAN966 || COMPILE_TEST | |
| select REGMAP | |
| select POLYNOMIAL | |
| help | |
| If you say yes here you get support for temperature monitoring | |
| on the Microchip LAN966x SoC. | |
| This driver can also be built as a module. If so, the module | |
| will be called lan966x-hwmon. | |
| config SENSORS_LATTEPANDA_SIGMA_EC | |
| tristate "LattePanda Sigma EC hardware monitoring" | |
| depends on X86 | |
| depends on DMI | |
| depends on HAS_IOPORT | |
| help | |
| If you say yes here you get support for the hardware monitoring | |
| features of the Embedded Controller on LattePanda Sigma | |
| single-board computers, including CPU fan speed (RPM) and | |
| board and CPU temperatures. | |
| The driver reads the EC directly via ACPI EC I/O ports and | |
| uses DMI matching to ensure it only loads on supported hardware. | |
| This driver can also be built as a module. If so, the module | |
| will be called lattepanda-sigma-ec. | |
| config SENSORS_LENOVO_EC | |
| tristate "Sensor reader for Lenovo ThinkStations" | |
| depends on X86 | |
| help | |
| If you say yes here you get support for LENOVO | |
| EC Sensor data on newer ThinkStation systems | |
| This driver can also be built as a module. If so, the module | |
| will be called lenovo_ec_sensors. | |
| config SENSORS_LINEAGE | |
| tristate "Lineage Compact Power Line Power Entry Module" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Lineage Compact Power Line | |
| series of DC/DC and AC/DC converters such as CP1800, CP2000AC, | |
| CP2000DC, CP2725, and others. | |
| This driver can also be built as a module. If so, the module | |
| will be called lineage-pem. | |
| config SENSORS_LOCHNAGAR | |
| tristate "Lochnagar Hardware Monitor" | |
| depends on MFD_LOCHNAGAR | |
| help | |
| If you say yes here you get support for Lochnagar 2 temperature, | |
| voltage and current sensors abilities. | |
| This driver can also be built as a module. If so, the module | |
| will be called lochnagar-hwmon. | |
| config SENSORS_LTC2945 | |
| tristate "Linear Technology LTC2945" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for Linear Technology LTC2945 | |
| I2C System Monitor. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc2945. | |
| config SENSORS_LTC2947 | |
| tristate | |
| config SENSORS_LTC2947_I2C | |
| tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over I2C" | |
| depends on I2C | |
| select REGMAP_I2C | |
| select SENSORS_LTC2947 | |
| help | |
| If you say yes here you get support for Linear Technology LTC2947 | |
| I2C High Precision Power and Energy Monitor | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc2947-i2c. | |
| config SENSORS_LTC2947_SPI | |
| tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over SPI" | |
| depends on SPI_MASTER | |
| select REGMAP_SPI | |
| select SENSORS_LTC2947 | |
| help | |
| If you say yes here you get support for Linear Technology LTC2947 | |
| SPI High Precision Power and Energy Monitor | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc2947-spi. | |
| config SENSORS_LTC2990 | |
| tristate "Linear Technology LTC2990" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Linear Technology LTC2990 | |
| I2C System Monitor. The LTC2990 supports a combination of voltage, | |
| current and temperature monitoring. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc2990. | |
| config SENSORS_LTC2991 | |
| tristate "Analog Devices LTC2991" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for Analog Devices LTC2991 | |
| Octal I2C Voltage, Current, and Temperature Monitor. The LTC2991 | |
| supports a combination of voltage, current and temperature monitoring. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc2991. | |
| config SENSORS_LTC2992 | |
| tristate "Linear Technology LTC2992" | |
| depends on I2C | |
| depends on GPIOLIB | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for Linear Technology LTC2992 | |
| I2C System Monitor. The LTC2992 measures current, voltage, and | |
| power of two supplies. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc2992. | |
| config SENSORS_LTC4151 | |
| tristate "Linear Technology LTC4151" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Linear Technology LTC4151 | |
| High Voltage I2C Current and Voltage Monitor interface. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc4151. | |
| config SENSORS_LTC4215 | |
| tristate "Linear Technology LTC4215" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Linear Technology LTC4215 | |
| Hot Swap Controller I2C interface. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc4215. | |
| config SENSORS_LTC4222 | |
| tristate "Linear Technology LTC4222" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for Linear Technology LTC4222 | |
| Dual Hot Swap Controller I2C interface. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc4222. | |
| config SENSORS_LTC4245 | |
| tristate "Linear Technology LTC4245" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Linear Technology LTC4245 | |
| Multiple Supply Hot Swap Controller I2C interface. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc4245. | |
| config SENSORS_LTC4260 | |
| tristate "Linear Technology LTC4260" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for Linear Technology LTC4260 | |
| Positive Voltage Hot Swap Controller I2C interface. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc4260. | |
| config SENSORS_LTC4261 | |
| tristate "Linear Technology LTC4261" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Linear Technology LTC4261 | |
| Negative Voltage Hot Swap Controller I2C interface. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc4261. | |
| config SENSORS_LTC4282 | |
| tristate "Analog Devices LTC4282" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for Analog Devices LTC4282 | |
| High Current Hot Swap Controller I2C interface. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc4282. | |
| config SENSORS_LTC4283 | |
| tristate "Analog Devices LTC4283" | |
| depends on I2C | |
| select REGMAP_I2C | |
| select AUXILIARY_BUS | |
| help | |
| If you say yes here you get support for Analog Devices LTC4283 | |
| Negative Voltage Hot Swap Controller I2C interface. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc4283. | |
| config SENSORS_LTQ_CPUTEMP | |
| bool "Lantiq cpu temperature sensor driver" | |
| depends on SOC_XWAY | |
| help | |
| If you say yes here you get support for the temperature | |
| sensor inside your CPU. | |
| config SENSORS_MACSMC_HWMON | |
| tristate "Apple SMC (Apple Silicon)" | |
| depends on MFD_MACSMC && OF | |
| help | |
| This driver enables hwmon support for current, power, temperature, | |
| and voltage sensors, as well as fan speed reporting and control | |
| on Apple Silicon devices. Say Y here if you have an Apple Silicon | |
| device. | |
| This driver can also be built as a module. If so, the module will | |
| be called macsmc-hwmon. | |
| config SENSORS_MAX1111 | |
| tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" | |
| depends on SPI_MASTER | |
| help | |
| Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 | |
| ADC chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called max1111. | |
| config SENSORS_MAX127 | |
| tristate "Maxim MAX127 12-bit 8-channel Data Acquisition System" | |
| depends on I2C | |
| help | |
| Say y here to support Maxim's MAX127 DAS chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called max127. | |
| config SENSORS_MAX16065 | |
| tristate "Maxim MAX16065 System Manager and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for hardware monitoring | |
| capabilities of the following Maxim System Manager chips. | |
| MAX16065 | |
| MAX16066 | |
| MAX16067 | |
| MAX16068 | |
| MAX16070 | |
| MAX16071 | |
| This driver can also be built as a module. If so, the module | |
| will be called max16065. | |
| config SENSORS_MAX1619 | |
| tristate "Maxim MAX1619 sensor chip" | |
| depends on I2C | |
| select REGMAP | |
| help | |
| If you say yes here you get support for MAX1619 sensor chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called max1619. | |
| config SENSORS_MAX1668 | |
| tristate "Maxim MAX1668 and compatibles" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for MAX1668, MAX1989 and | |
| MAX1805 chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called max1668. | |
| config SENSORS_MAX197 | |
| tristate "Maxim MAX197 and compatibles" | |
| help | |
| Support for the Maxim MAX197 A/D converter. | |
| Support will include, but not be limited to, MAX197, and MAX199. | |
| This driver can also be built as a module. If so, the module | |
| will be called max197. | |
| config SENSORS_MAX31722 | |
| tristate "MAX31722 temperature sensor" | |
| depends on SPI | |
| help | |
| Support for the Maxim Integrated MAX31722/MAX31723 digital | |
| thermometers/thermostats operating over an SPI interface. | |
| This driver can also be built as a module. If so, the module | |
| will be called max31722. | |
| config SENSORS_MAX31730 | |
| tristate "MAX31730 temperature sensor" | |
| depends on I2C | |
| help | |
| Support for the Maxim Integrated MAX31730 3-Channel Remote | |
| Temperature Sensor. | |
| This driver can also be built as a module. If so, the module | |
| will be called max31730. | |
| config SENSORS_MAX31760 | |
| tristate "MAX31760 fan speed controller" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Support for the Analog Devices MAX31760 Precision Fan-Speed | |
| Controller. MAX31760 integrates temperature sensing along with | |
| precision PWM fan control. | |
| This driver can also be built as a module. If so, the module | |
| will be called max31760. | |
| config MAX31827 | |
| tristate "MAX31827 low-power temperature switch and similar devices" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for MAX31827, MAX31828 and | |
| MAX31829 low-power temperature switches and sensors connected with I2C. | |
| This driver can also be built as a module. If so, the module | |
| will be called max31827. | |
| config SENSORS_MAX6620 | |
| tristate "Maxim MAX6620 fan controller" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the MAX6620 | |
| fan controller. | |
| This driver can also be built as a module. If so, the module | |
| will be called max6620. | |
| config SENSORS_MAX6621 | |
| tristate "Maxim MAX6621 sensor chip" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for MAX6621 sensor chip. | |
| MAX6621 is a PECI-to-I2C translator provides an efficient, | |
| low-cost solution for PECI-to-SMBus/I2C protocol conversion. | |
| It allows reading the temperature from the PECI-compliant | |
| host directly from up to four PECI-enabled CPUs. | |
| This driver can also be built as a module. If so, the module | |
| will be called max6621. | |
| config SENSORS_MAX6639 | |
| tristate "Maxim MAX6639 sensor chip" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for the MAX6639 | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called max6639. | |
| config SENSORS_MAX6650 | |
| tristate "Maxim MAX6650 sensor chip" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the MAX6650 / MAX6651 | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called max6650. | |
| config SENSORS_MAX6697 | |
| tristate "Maxim MAX6697 and compatibles" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for MAX6581, MAX6602, MAX6622, | |
| MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 | |
| temperature sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called max6697. | |
| config SENSORS_MAX31790 | |
| tristate "Maxim MAX31790 sensor chip" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for 6-Channel PWM-Output | |
| Fan RPM Controller. | |
| This driver can also be built as a module. If so, the module | |
| will be called max31790. | |
| config SENSORS_MAX77705 | |
| tristate "MAX77705 current and voltage sensor" | |
| depends on MFD_MAX77705 | |
| help | |
| If you say yes here you get support for MAX77705 sensors connected with I2C. | |
| This driver can also be built as a module. If so, the module | |
| will be called max77705-hwmon. | |
| config SENSORS_MC34VR500 | |
| tristate "NXP MC34VR500 hardware monitoring driver" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for the temperature and input | |
| voltage sensors of the NXP MC34VR500. | |
| config SENSORS_MCP3021 | |
| tristate "Microchip MCP3021 and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for MCP3021 and MCP3221. | |
| The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 | |
| with 12-bit resolution. | |
| This driver can also be built as a module. If so, the module | |
| will be called mcp3021. | |
| config SENSORS_MCP9982 | |
| tristate "Microchip Technology MCP9982 driver" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Say yes here to include support for Microchip Technology's MCP998X/33 | |
| and MCP998XD/33D Multichannel Automotive Temperature Monitor Family. | |
| This driver can also be built as a module. If so, the module | |
| will be called mcp9982. | |
| config SENSORS_MLXREG_FAN | |
| tristate "Mellanox FAN driver" | |
| depends on MELLANOX_PLATFORM | |
| imply THERMAL | |
| select REGMAP | |
| help | |
| This option enables support for the FAN control on the Mellanox | |
| Ethernet and InfiniBand switches. The driver can be activated by the | |
| platform device add call. Say Y to enable these. To compile this | |
| driver as a module, choose 'M' here: the module will be called | |
| mlxreg-fan. | |
| config SENSORS_TC654 | |
| tristate "Microchip TC654/TC655 and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for TC654 and TC655. | |
| The TC654 and TC655 are PWM mode fan speed controllers with | |
| FanSense technology for use with brushless DC fans. | |
| This driver can also be built as a module. If so, the module | |
| will be called tc654. | |
| config SENSORS_TPS23861 | |
| tristate "Texas Instruments TPS23861 PoE PSE" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for Texas Instruments | |
| TPS23861 802.3at PoE PSE chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called tps23861. | |
| config SENSORS_MENF21BMC_HWMON | |
| tristate "MEN 14F021P00 BMC Hardware Monitoring" | |
| depends on MFD_MENF21BMC | |
| help | |
| Say Y here to include support for the MEN 14F021P00 BMC | |
| hardware monitoring. | |
| This driver can also be built as a module. If so the module | |
| will be called menf21bmc_hwmon. | |
| config SENSORS_MR75203 | |
| tristate "Moortec Semiconductor MR75203 PVT Controller" | |
| select REGMAP_MMIO | |
| help | |
| If you say yes here you get support for Moortec MR75203 | |
| PVT controller. | |
| This driver can also be built as a module. If so, the module | |
| will be called mr75203. | |
| config SENSORS_ADCXX | |
| tristate "National Semiconductor ADCxxxSxxx" | |
| depends on SPI_MASTER | |
| help | |
| If you say yes here you get support for the National Semiconductor | |
| ADC<bb><c>S<sss> chip family, where | |
| * bb is the resolution in number of bits (8, 10, 12) | |
| * c is the number of channels (1, 2, 4, 8) | |
| * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 | |
| kSPS and 101 for 1 MSPS) | |
| Examples : ADC081S101, ADC124S501, ... | |
| This driver can also be built as a module. If so, the module | |
| will be called adcxx. | |
| config SENSORS_LM63 | |
| tristate "National Semiconductor LM63 and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the National | |
| Semiconductor LM63, LM64, and LM96163 remote diode digital temperature | |
| sensors with integrated fan control. Such chips are found | |
| on the Tyan S4882 (Thunder K8QS Pro) motherboard, among | |
| others. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm63. | |
| config SENSORS_LM70 | |
| tristate "National Semiconductor LM70 and compatibles" | |
| depends on SPI_MASTER | |
| help | |
| If you say yes here you get support for the National Semiconductor | |
| LM70, LM71, LM74 and Texas Instruments TMP121/TMP123, TMP122/TMP124, | |
| TMP125 digital temperature sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm70. | |
| config SENSORS_LM73 | |
| tristate "National Semiconductor LM73" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for National Semiconductor LM73 | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm73. | |
| config SENSORS_LM75 | |
| tristate "National Semiconductor LM75 and compatibles" | |
| depends on I3C_OR_I2C | |
| select REGMAP_I2C | |
| select REGMAP_I3C if I3C | |
| help | |
| If you say yes here you get support for one common type of | |
| temperature sensor chip, with models including: | |
| - Analog Devices ADT75 | |
| - Atmel (now Microchip) AT30TS74 | |
| - Dallas Semiconductor DS75, DS1775 and DS7505 | |
| - Global Mixed-mode Technology (GMT) G751 | |
| - Maxim MAX6625 and MAX6626 | |
| - Microchip MCP980x | |
| - National Semiconductor LM75, LM75A | |
| - NXP's LM75A | |
| - ST Microelectronics STDS75 | |
| - ST Microelectronics STLM75 | |
| - TelCom (now Microchip) TCN75 | |
| - Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, | |
| TMP175, TMP275 | |
| This driver supports driver model based binding through board | |
| specific I2C device tables. | |
| It also supports the "legacy" style of driver binding. To use | |
| that with some chips which don't replicate LM75 quirks exactly, | |
| you may need the "force" module parameter. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm75. | |
| config SENSORS_LM77 | |
| tristate "National Semiconductor LM77" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for National Semiconductor LM77 | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm77. | |
| config SENSORS_LM78 | |
| tristate "National Semiconductor LM78 and compatibles" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for National Semiconductor LM78, | |
| LM78-J and LM79. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm78. | |
| config SENSORS_LM80 | |
| tristate "National Semiconductor LM80 and LM96080" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for National Semiconductor | |
| LM80 and LM96080 sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm80. | |
| config SENSORS_LM83 | |
| tristate "National Semiconductor LM83 and compatibles" | |
| depends on I2C | |
| select REGMAP | |
| help | |
| If you say yes here you get support for National Semiconductor | |
| LM82 and LM83 sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm83. | |
| config SENSORS_LM85 | |
| tristate "National Semiconductor LM85 and compatibles" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for National Semiconductor LM85 | |
| sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, | |
| EMC6D101, EMC6D102, and EMC6D103. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm85. | |
| config SENSORS_LM87 | |
| tristate "National Semiconductor LM87 and compatibles" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for National Semiconductor LM87 | |
| and Analog Devices ADM1024 sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm87. | |
| config SENSORS_LM90 | |
| tristate "National Semiconductor LM90 and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for National Semiconductor LM84, | |
| LM90, LM86, LM89 and LM99, Analog Devices ADM1020, ADM2021, ADM1021A, | |
| ADM1023, ADM1032, ADT7461, ADT7461A, ADT7481, ADT7482, and ADT7483A, | |
| Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654, | |
| MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695, | |
| MAX6696, | |
| ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218, | |
| Winbond/Nuvoton W83L771W/G/AWG/ASG, NCT7716, NCT7717 and NCT7718, | |
| Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461 | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm90. | |
| config SENSORS_LM92 | |
| tristate "National Semiconductor LM92 and compatibles" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for National Semiconductor LM92 | |
| and LM76 as well as Maxim MAX6633/6634/6635 sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm92. | |
| config SENSORS_LM93 | |
| tristate "National Semiconductor LM93 and compatibles" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for National Semiconductor LM93, | |
| LM94, and compatible sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm93. | |
| config SENSORS_LM95234 | |
| tristate "National Semiconductor LM95234 and compatibles" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for the LM95233 and LM95234 | |
| temperature sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm95234. | |
| config SENSORS_LM95241 | |
| tristate "National Semiconductor LM95241 and compatibles" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for LM95231 and LM95241 sensor | |
| chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm95241. | |
| config SENSORS_LM95245 | |
| tristate "National Semiconductor LM95245 and compatibles" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for LM95235 and LM95245 | |
| temperature sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called lm95245. | |
| config SENSORS_PC87360 | |
| tristate "National Semiconductor PC87360 family" | |
| depends on HAS_IOPORT | |
| depends on !PPC | |
| select HWMON_VID | |
| help | |
| If you say yes here you get access to the hardware monitoring | |
| functions of the National Semiconductor PC8736x Super-I/O chips. | |
| The PC87360, PC87363 and PC87364 only have fan monitoring and | |
| control. The PC87365 and PC87366 additionally have voltage and | |
| temperature monitoring. | |
| This driver can also be built as a module. If so, the module | |
| will be called pc87360. | |
| config SENSORS_PC87427 | |
| tristate "National Semiconductor PC87427" | |
| depends on HAS_IOPORT | |
| depends on !PPC | |
| help | |
| If you say yes here you get access to the hardware monitoring | |
| functions of the National Semiconductor PC87427 Super-I/O chip. | |
| The chip has two distinct logical devices, one for fan speed | |
| monitoring and control, and one for voltage and temperature | |
| monitoring. Fan speed monitoring and control are supported, as | |
| well as temperature monitoring. Voltages aren't supported yet. | |
| This driver can also be built as a module. If so, the module | |
| will be called pc87427. | |
| config SENSORS_NTC_THERMISTOR | |
| tristate "NTC thermistor support" | |
| depends on IIO | |
| help | |
| This driver supports NTC thermistors sensor reading and its | |
| interpretation. The driver can also monitor the temperature and | |
| send notifications about the temperature. | |
| Currently, this driver supports | |
| NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333, | |
| NCP03WF104 and NCP15XH103 from Murata and B57330V2103 and | |
| B57891S0103 from EPCOS. | |
| This driver can also be built as a module. If so, the module | |
| will be called ntc_thermistor. | |
| config SENSORS_NCT6683 | |
| tristate "Nuvoton NCT6683D" | |
| depends on HAS_IOPORT | |
| depends on !PPC | |
| help | |
| If you say yes here you get support for the hardware monitoring | |
| functionality of the Nuvoton NCT6683D eSIO chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called nct6683. | |
| config SENSORS_NCT6694 | |
| tristate "Nuvoton NCT6694 Hardware Monitor support" | |
| depends on MFD_NCT6694 | |
| help | |
| Say Y here to support Nuvoton NCT6694 hardware monitoring | |
| functionality. | |
| This driver can also be built as a module. If so, the module | |
| will be called nct6694-hwmon. | |
| config SENSORS_NCT6775_CORE | |
| tristate | |
| select REGMAP | |
| help | |
| This module contains common code shared by the platform and | |
| i2c versions of the nct6775 driver; it is not useful on its | |
| own. | |
| If built as a module, the module will be called | |
| nct6775-core. | |
| config SENSORS_NCT6775 | |
| tristate "Platform driver for Nuvoton NCT6775F and compatibles" | |
| depends on HAS_IOPORT | |
| depends on !PPC | |
| depends on ACPI || ACPI=n | |
| select HWMON_VID | |
| select SENSORS_NCT6775_CORE | |
| help | |
| If you say yes here you get support for the hardware monitoring | |
| functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, | |
| NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible | |
| Super-I/O chips. This driver replaces the w83627ehf driver for | |
| NCT6775F and NCT6776F. | |
| This driver can also be built as a module. If so, the module | |
| will be called nct6775. | |
| config SENSORS_NCT6775_I2C | |
| tristate "I2C driver for Nuvoton NCT6775F and compatibles" | |
| depends on I2C | |
| select REGMAP_I2C | |
| select SENSORS_NCT6775_CORE | |
| help | |
| If you say yes here you get support for the hardware monitoring | |
| functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, | |
| NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible | |
| Super-I/O chips via their I2C interface. | |
| If you're not building a kernel for a BMC, this is probably | |
| not the driver you want (see CONFIG_SENSORS_NCT6775). | |
| This driver can also be built as a module. If so, the module | |
| will be called nct6775-i2c. | |
| config SENSORS_NCT7363 | |
| tristate "Nuvoton NCT7363Y" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for the Nuvoton NCT7363Y | |
| hardware monitoring chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called nct7363. | |
| config SENSORS_NCT7802 | |
| tristate "Nuvoton NCT7802Y" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for the Nuvoton NCT7802Y | |
| hardware monitoring chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called nct7802. | |
| config SENSORS_NCT7904 | |
| tristate "Nuvoton NCT7904" | |
| depends on I2C && WATCHDOG | |
| select WATCHDOG_CORE | |
| help | |
| If you say yes here you get support for the Nuvoton NCT7904 | |
| hardware monitoring chip, including manual fan speed control | |
| and support for the integrated watchdog. | |
| This driver can also be built as a module. If so, the module | |
| will be called nct7904. | |
| config SENSORS_NPCM7XX | |
| tristate "Nuvoton NPCM750 and compatible PWM and Fan controllers" | |
| imply THERMAL | |
| help | |
| This driver provides support for Nuvoton NPCM750/730/715/705 PWM | |
| and Fan controllers. | |
| This driver can also be built as a module. If so, the module | |
| will be called npcm750-pwm-fan. | |
| config SENSORS_NSA320 | |
| tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors" | |
| depends on GPIOLIB && OF | |
| depends on MACH_KIRKWOOD || COMPILE_TEST | |
| help | |
| If you say yes here you get support for hardware monitoring | |
| for the ZyXEL NSA320 Media Server and other compatible devices | |
| (probably the NSA325 and some NSA310 variants). | |
| The sensor data is taken from a Holtek HT46R065 microcontroller | |
| connected to GPIO lines. | |
| This driver can also be built as a module. If so, the module | |
| will be called nsa320-hwmon. | |
| config SENSORS_NZXT_KRAKEN2 | |
| tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers" | |
| depends on USB_HID | |
| help | |
| If you say yes here you get support for hardware monitoring for the | |
| NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers. | |
| This driver can also be built as a module. If so, the module | |
| will be called nzxt-kraken2. | |
| config SENSORS_NZXT_KRAKEN3 | |
| tristate "NZXT Kraken X53/X63/X73, Z53/Z63/Z73 coolers" | |
| depends on USB_HID | |
| help | |
| If you say yes here you get support for hardware monitoring for the | |
| NZXT Kraken X53/X63/X73, Z53/Z63/Z73 all-in-one CPU liquid coolers. | |
| This driver can also be built as a module. If so, the module | |
| will be called nzxt-kraken3. | |
| config SENSORS_NZXT_SMART2 | |
| tristate "NZXT RGB & Fan Controller/Smart Device v2" | |
| depends on USB_HID | |
| help | |
| If you say yes here you get support for hardware monitoring for the | |
| NZXT RGB & Fan Controller/Smart Device v2. | |
| This driver can also be built as a module. If so, the module | |
| will be called nzxt-smart2. | |
| source "drivers/hwmon/occ/Kconfig" | |
| config SENSORS_PCF8591 | |
| tristate "Philips PCF8591 ADC/DAC" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Philips PCF8591 4-channel | |
| ADC, 1-channel DAC chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called pcf8591. | |
| These devices are hard to detect and rarely found on mainstream | |
| hardware. If unsure, say N. | |
| source "drivers/hwmon/peci/Kconfig" | |
| source "drivers/hwmon/pmbus/Kconfig" | |
| config SENSORS_PT5161L | |
| tristate "Astera Labs PT5161L PCIe retimer hardware monitoring" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for temperature monitoring | |
| on the Astera Labs PT5161L PCIe retimer. | |
| This driver can also be built as a module. If so, the module | |
| will be called pt5161l. | |
| config SENSORS_PWM_FAN | |
| tristate "PWM fan" | |
| depends on PWM || COMPILE_TEST | |
| help | |
| If you say yes here you get support for fans connected to PWM lines. | |
| The driver uses the generic PWM interface, thus it will work on a | |
| variety of SoCs. | |
| This driver can also be built as a module. If so, the module | |
| will be called pwm-fan. | |
| config SENSORS_QNAP_MCU_HWMON | |
| tristate "QNAP MCU hardware monitoring" | |
| depends on MFD_QNAP_MCU | |
| help | |
| Say yes here to enable support for fan and temperature sensor | |
| connected to a QNAP MCU, as found in a number of QNAP network | |
| attached storage devices. | |
| This driver can also be built as a module. If so, the module | |
| will be called qnap-mcu-hwmon. | |
| config SENSORS_RASPBERRYPI_HWMON | |
| tristate "Raspberry Pi voltage monitor" | |
| depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) | |
| help | |
| If you say yes here you get support for voltage sensor on the | |
| Raspberry Pi. | |
| This driver can also be built as a module. If so, the module | |
| will be called raspberrypi-hwmon. | |
| config SENSORS_SL28CPLD | |
| tristate "Kontron sl28cpld hardware monitoring driver" | |
| depends on MFD_SL28CPLD || COMPILE_TEST | |
| help | |
| If you say yes here you get support for the fan supervisor of the | |
| sl28cpld board management controller. | |
| This driver can also be built as a module. If so, the module | |
| will be called sl28cpld-hwmon. | |
| config SENSORS_SBTSI | |
| tristate "Emulated SB-TSI temperature sensor" | |
| depends on AMD_SBTSI | |
| help | |
| If you say yes here you get support for emulated temperature | |
| sensors on AMD SoCs with SB-TSI interface connected to a BMC device. | |
| This driver can also be built as a module. If so, the module will | |
| be called sbtsi_temp. | |
| config SENSORS_SHT15 | |
| tristate "Sensiron humidity and temperature sensors. SHT15 and compat." | |
| depends on GPIOLIB || COMPILE_TEST | |
| select BITREVERSE | |
| help | |
| If you say yes here you get support for the Sensiron SHT10, SHT11, | |
| SHT15, SHT71, SHT75 humidity and temperature sensors. | |
| This driver can also be built as a module. If so, the module | |
| will be called sht15. | |
| config SENSORS_SHT21 | |
| tristate "Sensiron humidity and temperature sensors. SHT21 and compat." | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Sensiron SHT20, SHT21, | |
| SHT25 humidity and temperature sensors. | |
| This driver can also be built as a module. If so, the module | |
| will be called sht21. | |
| config SENSORS_SHT3x | |
| tristate "Sensiron humidity and temperature sensors. SHT3x and compat." | |
| depends on I2C | |
| select CRC8 | |
| help | |
| If you say yes here you get support for the Sensiron SHT30, SHT31, | |
| SHT85 and the compatible GXCAS GXHT30 humidity and temperature | |
| sensors. | |
| This driver can also be built as a module. If so, the module | |
| will be called sht3x. | |
| config SENSORS_SHT4x | |
| tristate "Sensiron humidity and temperature sensors. SHT4x and compat." | |
| depends on I2C | |
| select CRC8 | |
| help | |
| If you say yes here you get support for the Sensiron SHT40, SHT41 and | |
| SHT45 humidity and temperature sensors. | |
| This driver can also be built as a module. If so, the module | |
| will be called sht4x. | |
| config SENSORS_SHTC1 | |
| tristate "Sensiron humidity and temperature sensors. SHTC1 and compat." | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Sensiron SHTC1, SHTW1, | |
| and SHTC3 humidity and temperature sensors. | |
| This driver can also be built as a module. If so, the module | |
| will be called shtc1. | |
| config SENSORS_SIS5595 | |
| tristate "Silicon Integrated Systems Corp. SiS5595" | |
| depends on PCI && HAS_IOPORT | |
| help | |
| If you say yes here you get support for the integrated sensors in | |
| SiS5595 South Bridges. | |
| This driver can also be built as a module. If so, the module | |
| will be called sis5595. | |
| config SENSORS_SY7636A | |
| tristate "Silergy SY7636A" | |
| depends on MFD_SY7636A | |
| help | |
| If you say yes here you get support for the thermistor readout of | |
| the Silergy SY7636A PMIC. | |
| This driver can also be built as a module. If so, the module | |
| will be called sy7636a-hwmon. | |
| config SENSORS_DME1737 | |
| tristate "SMSC DME1737, SCH311x and compatibles" | |
| depends on HAS_IOPORT | |
| depends on I2C && !PPC | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the hardware monitoring | |
| and fan control features of the SMSC DME1737, SCH311x, SCH5027, and | |
| Asus A8000 Super-I/O chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called dme1737. | |
| config SENSORS_EIC7700_PVT | |
| tristate "Eswin EIC7700 Voltage, Temperature sensor driver" | |
| depends on ARCH_ESWIN || COMPILE_TEST | |
| select POLYNOMIAL | |
| help | |
| If you say yes here you get support for Eswin EIC7700 PVT sensor | |
| embedded into the SoC. | |
| This driver can also be built as a module. If so, the module will be | |
| called eic7700-pvt. | |
| config SENSORS_EMC1403 | |
| tristate "SMSC EMC1403/23 thermal sensor" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for the SMSC EMC1403/23 | |
| temperature monitoring chip. | |
| Threshold values can be configured using sysfs. | |
| Data from the different diodes are accessible via sysfs. | |
| config SENSORS_EMC1812 | |
| tristate "Microchip Technology EMC1812 driver" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here to build support for Microchip Technology's | |
| EMC181X/33 Multichannel Low-Voltage Remote Diode Sensor Family. | |
| This driver can also be built as a module. If so, the module | |
| will be called emc1812. | |
| config SENSORS_EMC2103 | |
| tristate "SMSC EMC2103" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the temperature | |
| and fan sensors of the SMSC EMC2103 chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called emc2103. | |
| config SENSORS_EMC2305 | |
| tristate "Microchip EMC2305 and compatible EMC2301/2/3" | |
| depends on I2C | |
| imply THERMAL | |
| help | |
| If you say yes here you get support for the Microchip EMC2305 | |
| fan controller chips. | |
| The Microchip EMC2305 is a fan controller for up to 5 fans. | |
| Fan rotation speeds are reported in RPM. | |
| This driver can also be built as a module. If so, the module | |
| will be called emc2305. | |
| config SENSORS_EMC6W201 | |
| tristate "SMSC EMC6W201" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the SMSC EMC6W201 | |
| hardware monitoring chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called emc6w201. | |
| config SENSORS_SMSC47M1 | |
| tristate "SMSC LPC47M10x and compatibles" | |
| depends on HAS_IOPORT | |
| depends on !PPC | |
| help | |
| If you say yes here you get support for the integrated fan | |
| monitoring and control capabilities of the SMSC LPC47B27x, | |
| LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, | |
| LPC47M192, LPC47M292 and LPC47M997 chips. | |
| The temperature and voltage sensor features of the LPC47M15x, | |
| LPC47M192, LPC47M292 and LPC47M997 are supported by another | |
| driver, select also "SMSC LPC47M192 and compatibles" below for | |
| those. | |
| This driver can also be built as a module. If so, the module | |
| will be called smsc47m1. | |
| config SENSORS_SMSC47M192 | |
| tristate "SMSC LPC47M192 and compatibles" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the temperature and | |
| voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 | |
| and LPC47M997 chips. | |
| The fan monitoring and control capabilities of these chips | |
| are supported by another driver, select | |
| "SMSC LPC47M10x and compatibles" above. You need both drivers | |
| if you want fan control and voltage/temperature sensor support. | |
| This driver can also be built as a module. If so, the module | |
| will be called smsc47m192. | |
| config SENSORS_ALTERA_SOCFPGA_HWMON | |
| tristate "Altera SoC FPGA hardware monitoring features" | |
| depends on INTEL_STRATIX10_SERVICE | |
| help | |
| If you say yes here you get support for the temperature and | |
| voltage sensors of Altera SoC FPGA devices. | |
| This driver can also be built as a module. If so, the module | |
| will be called socfpga-hwmon. | |
| config SENSORS_SMSC47B397 | |
| tristate "SMSC LPC47B397-NC" | |
| depends on HAS_IOPORT | |
| depends on !PPC | |
| help | |
| If you say yes here you get support for the SMSC LPC47B397-NC | |
| sensor chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called smsc47b397. | |
| config SENSORS_SCH56XX_COMMON | |
| tristate | |
| select REGMAP | |
| config SENSORS_SCH5627 | |
| tristate "SMSC SCH5627" | |
| depends on HAS_IOPORT | |
| depends on !PPC && WATCHDOG | |
| select SENSORS_SCH56XX_COMMON | |
| select WATCHDOG_CORE | |
| help | |
| If you say yes here you get support for the hardware monitoring | |
| features of the SMSC SCH5627 Super-I/O chip including support for | |
| the integrated watchdog. | |
| This driver can also be built as a module. If so, the module | |
| will be called sch5627. | |
| config SENSORS_SCH5636 | |
| tristate "SMSC SCH5636" | |
| depends on HAS_IOPORT | |
| depends on !PPC && WATCHDOG | |
| select SENSORS_SCH56XX_COMMON | |
| select WATCHDOG_CORE | |
| help | |
| SMSC SCH5636 Super I/O chips include an embedded microcontroller for | |
| hardware monitoring solutions, allowing motherboard manufacturers to | |
| create their own custom hwmon solution based upon the SCH5636. | |
| Currently this driver only supports the Fujitsu Theseus SCH5636 based | |
| hwmon solution. Say yes here if you want support for the Fujitsu | |
| Theseus' hardware monitoring features including support for the | |
| integrated watchdog. | |
| This driver can also be built as a module. If so, the module | |
| will be called sch5636. | |
| config SENSORS_STTS751 | |
| tristate "ST Microelectronics STTS751" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for STTS751 | |
| temperature sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called stts751. | |
| config SENSORS_SFCTEMP | |
| tristate "Starfive JH71x0 temperature sensor" | |
| depends on ARCH_STARFIVE || COMPILE_TEST | |
| help | |
| If you say yes here you get support for temperature sensor | |
| on the Starfive JH71x0 SoCs. | |
| This driver can also be built as a module. If so, the module | |
| will be called sfctemp. | |
| config SENSORS_SG2042_MCU | |
| tristate "Sophgo onboard MCU support" | |
| depends on I2C | |
| depends on ARCH_SOPHGO || COMPILE_TEST | |
| help | |
| Support for onboard MCU of Sophgo SG2042 SoCs. This mcu provides | |
| power control and some basic information. | |
| This driver can be built as a module. If so, the module | |
| will be called sg2042-mcu. | |
| config SENSORS_SURFACE_FAN | |
| tristate "Surface Fan Driver" | |
| depends on SURFACE_AGGREGATOR | |
| depends on SURFACE_AGGREGATOR_BUS | |
| help | |
| Driver that provides monitoring of the fan on Surface Pro devices that | |
| have a fan, like the Surface Pro 9. | |
| This makes the fan's current speed accessible through the hwmon | |
| system. It does not provide control over the fan, the firmware is | |
| responsible for that, this driver merely provides monitoring. | |
| Select M or Y here, if you want to be able to read the fan's speed. | |
| config SENSORS_SURFACE_TEMP | |
| tristate "Microsoft Surface Thermal Sensor Driver" | |
| depends on SURFACE_AGGREGATOR | |
| depends on SURFACE_AGGREGATOR_BUS | |
| help | |
| Driver for monitoring thermal sensors connected via the Surface | |
| Aggregator Module (embedded controller) on Microsoft Surface devices. | |
| This driver can also be built as a module. If so, the module | |
| will be called surface_temp. | |
| config SENSORS_ADC128D818 | |
| tristate "Texas Instruments ADC128D818" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Texas Instruments | |
| ADC128D818 System Monitor with Temperature Sensor chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called adc128d818. | |
| config SENSORS_ADS7828 | |
| tristate "Texas Instruments ADS7828 and compatibles" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for Texas Instruments ADS7828 and | |
| ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while | |
| it is 8-bit on ADS7830. | |
| This driver can also be built as a module. If so, the module | |
| will be called ads7828. | |
| config SENSORS_ADS7871 | |
| tristate "Texas Instruments ADS7871 A/D converter" | |
| depends on SPI | |
| help | |
| If you say yes here you get support for TI ADS7871 & ADS7870 | |
| This driver can also be built as a module. If so, the module | |
| will be called ads7871. | |
| config SENSORS_AMC6821 | |
| tristate "Texas Instruments AMC6821" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for the Texas Instruments | |
| AMC6821 hardware monitoring chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called amc6821. | |
| config SENSORS_INA209 | |
| tristate "TI / Burr Brown INA209" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the TI / Burr Brown INA209 | |
| voltage / current / power monitor I2C interface. | |
| This driver can also be built as a module. If so, the module will | |
| be called ina209. | |
| config SENSORS_INA2XX | |
| tristate "Texas Instruments INA219 and compatibles" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for INA219, INA220, INA226, | |
| INA230, INA231, INA234, INA260, and SY24655 power monitor chips. | |
| The INA2xx driver is configured for the default configuration of | |
| the part as described in the datasheet. | |
| Default value for Rshunt is 10 mOhms except for INA260 which has an | |
| internal 2 mOhm shunt resistor. | |
| This driver can also be built as a module. If so, the module | |
| will be called ina2xx. | |
| config SENSORS_INA238 | |
| tristate "Texas Instruments INA238 and compatibles" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for INA228, INA237, INA238, | |
| INA700, INA780, and SQ52206 power monitor chips. This driver supports | |
| voltage, current, power, energy, and temperature measurements as well | |
| as alarm configuration. | |
| This driver can also be built as a module. If so, the module | |
| will be called ina238. | |
| config SENSORS_INA3221 | |
| tristate "Texas Instruments INA3221 Triple Power Monitor" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for the TI INA3221 Triple Power | |
| Monitor. | |
| This driver can also be built as a module. If so, the module | |
| will be called ina3221. | |
| config SENSORS_SPD5118 | |
| tristate "SPD5118 Compliant Temperature Sensors" | |
| depends on I3C_OR_I2C | |
| select REGMAP_I2C | |
| select REGMAP_I3C if I3C | |
| help | |
| If you say yes here you get support for SPD5118 (JEDEC JESD300) | |
| compliant temperature sensors using I2C or I3C bus interface. | |
| Such sensors are found on DDR5 memory modules. | |
| This driver supports both I2C and I3C interfaces. | |
| This driver can also be built as a module. If so, the module | |
| will be called spd5118. | |
| config SENSORS_SPD5118_DETECT | |
| bool "Enable detect function" | |
| depends on SENSORS_SPD5118 | |
| default (!DMI || !X86) | |
| help | |
| If enabled, the driver auto-detects if a chip in the SPD address | |
| range is compliant to the SPD51888 standard and auto-instantiates | |
| if that is the case. If disabled, SPD5118 compliant devices have | |
| to be instantiated by other means. On X86 systems with DMI support | |
| this will typically be done from DMI DDR detection code in the | |
| I2C SMBus subsystem. Devicetree based systems will instantiate | |
| attached devices if the DIMMs are listed in the devicetree file. | |
| Disabling the detect function will speed up boot time and reduce | |
| the risk of mis-detecting SPD5118 compliant devices. However, it | |
| may result in missed DIMMs under some circumstances. | |
| If unsure, say Y. | |
| config SENSORS_TC74 | |
| tristate "Microchip TC74" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Microchip TC74 single | |
| input temperature sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called tc74. | |
| config SENSORS_THMC50 | |
| tristate "Texas Instruments THMC50 / Analog Devices ADM1022" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Texas Instruments THMC50 | |
| sensor chips and clones: the Analog Devices ADM1022. | |
| This driver can also be built as a module. If so, the module | |
| will be called thmc50. | |
| config SENSORS_TMP102 | |
| tristate "Texas Instruments TMP102" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for Texas Instruments TMP102, | |
| TMP110 and TMP113 sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called tmp102. | |
| config SENSORS_TMP103 | |
| tristate "Texas Instruments TMP103" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for Texas Instruments TMP103 | |
| sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called tmp103. | |
| config SENSORS_TMP108 | |
| tristate "Texas Instruments TMP108" | |
| depends on I3C_OR_I2C | |
| select REGMAP_I2C | |
| select REGMAP_I3C if I3C | |
| help | |
| If you say yes here you get support for Texas Instruments TMP108 | |
| sensor chips, NXP temperature sensors P3T1035, P3T1085 and P3T2030. | |
| This driver can also be built as a module. If so, the module | |
| will be called tmp108. | |
| config SENSORS_TMP401 | |
| tristate "Texas Instruments TMP401 and compatibles" | |
| depends on I2C | |
| select REGMAP | |
| help | |
| If you say yes here you get support for Texas Instruments TMP401, | |
| TMP411, TMP431, TMP432, and TMP435 temperature sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called tmp401. | |
| config SENSORS_TMP421 | |
| tristate "Texas Instruments TMP421 and compatible" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for Texas Instruments TMP421, | |
| TMP422, TMP423, TMP441, and TMP442 temperature sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called tmp421. | |
| config SENSORS_TMP464 | |
| tristate "Texas Instruments TMP464 and compatible" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for Texas Instruments TMP464 | |
| and TMP468 temperature sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called tmp464. | |
| config SENSORS_TMP513 | |
| tristate "Texas Instruments TMP513 and compatibles" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for Texas Instruments TMP512, | |
| and TMP513 temperature and power supply sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called tmp513. | |
| config SENSORS_TSC1641 | |
| tristate "ST Microelectronics TSC1641 Power Monitor" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for TSC1641 power monitor chip. | |
| The TSC1641 driver is configured for the default configuration of | |
| the part except temperature is enabled by default. | |
| This driver can also be built as a module. If so, the module | |
| will be called tsc1641. | |
| config SENSORS_VEXPRESS | |
| tristate "Versatile Express" | |
| depends on VEXPRESS_CONFIG | |
| help | |
| This driver provides support for hardware sensors available on | |
| the ARM Ltd's Versatile Express platform. It can provide wide | |
| range of information like temperature, power, energy. | |
| config SENSORS_VIA_CPUTEMP | |
| tristate "VIA CPU temperature sensor" | |
| depends on X86 | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the temperature | |
| sensor inside your CPU. Supported are all known variants of | |
| the VIA C7 and Nano. | |
| config SENSORS_VIA686A | |
| tristate "VIA686A" | |
| depends on PCI && HAS_IOPORT | |
| help | |
| If you say yes here you get support for the integrated sensors in | |
| Via 686A/B South Bridges. | |
| This driver can also be built as a module. If so, the module | |
| will be called via686a. | |
| config SENSORS_VT1211 | |
| tristate "VIA VT1211" | |
| depends on HAS_IOPORT | |
| depends on !PPC | |
| select HWMON_VID | |
| help | |
| If you say yes here then you get support for hardware monitoring | |
| features of the VIA VT1211 Super-I/O chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called vt1211. | |
| config SENSORS_VT8231 | |
| tristate "VIA VT8231" | |
| depends on PCI && HAS_IOPORT | |
| select HWMON_VID | |
| help | |
| If you say yes here then you get support for the integrated sensors | |
| in the VIA VT8231 device. | |
| This driver can also be built as a module. If so, the module | |
| will be called vt8231. | |
| config SENSORS_W83773G | |
| tristate "Nuvoton W83773G" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| If you say yes here you get support for the Nuvoton W83773G hardware | |
| monitoring chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called w83773g. | |
| config SENSORS_W83781D | |
| tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the Winbond W8378x series | |
| of sensor chips: the W83781D, W83782D and W83783S, and the similar | |
| Asus AS99127F. | |
| This driver can also be built as a module. If so, the module | |
| will be called w83781d. | |
| config SENSORS_W83791D | |
| tristate "Winbond W83791D" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the Winbond W83791D chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called w83791d. | |
| config SENSORS_W83792D | |
| tristate "Winbond W83792D" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Winbond W83792D chip. | |
| This driver can also be built as a module. If so, the module | |
| will be called w83792d. | |
| config SENSORS_W83793 | |
| tristate "Winbond W83793" | |
| depends on I2C | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the Winbond W83793 | |
| hardware monitoring chip, including support for the integrated | |
| watchdog. | |
| This driver can also be built as a module. If so, the module | |
| will be called w83793. | |
| config SENSORS_W83795 | |
| tristate "Winbond/Nuvoton W83795G/ADG" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Winbond W83795G and | |
| W83795ADG hardware monitoring chip, including manual fan speed | |
| control. | |
| This driver can also be built as a module. If so, the module | |
| will be called w83795. | |
| config SENSORS_W83795_FANCTRL | |
| bool "Include automatic fan control support" | |
| depends on SENSORS_W83795 | |
| help | |
| If you say yes here, support for automatic fan speed control | |
| will be included in the driver. | |
| Please also note that this option will create sysfs attribute | |
| files which may change in the future, so you shouldn't rely | |
| on them being stable. | |
| config SENSORS_W83L785TS | |
| tristate "Winbond W83L785TS-S" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Winbond W83L785TS-S | |
| sensor chip, which is used on the Asus A7N8X, among other | |
| motherboards. | |
| This driver can also be built as a module. If so, the module | |
| will be called w83l785ts. | |
| config SENSORS_W83L786NG | |
| tristate "Winbond W83L786NG, W83L786NR" | |
| depends on I2C | |
| help | |
| If you say yes here you get support for the Winbond W83L786NG | |
| and W83L786NR sensor chips. | |
| This driver can also be built as a module. If so, the module | |
| will be called w83l786ng. | |
| config SENSORS_W83627HF | |
| tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" | |
| depends on HAS_IOPORT | |
| depends on !PPC | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the Winbond W836X7 series | |
| of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and | |
| W83697HF. | |
| This driver can also be built as a module. If so, the module | |
| will be called w83627hf. | |
| config SENSORS_W83627EHF | |
| tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG" | |
| depends on HAS_IOPORT | |
| depends on !PPC | |
| select HWMON_VID | |
| help | |
| If you say yes here you get support for the hardware | |
| monitoring functionality of the Winbond W83627EHF Super-I/O chip. | |
| This driver also supports the W83627EHG, which is the lead-free | |
| version of the W83627EHF, and the W83627DHG, which is a similar | |
| chip suited for specific Intel processors that use PECI such as | |
| the Core 2 Duo. And also the W83627UHG, which is a stripped down | |
| version of the W83627DHG (as far as hardware monitoring goes.) | |
| This driver also supports Nuvoton W83667HG and W83667HG-B. | |
| This driver can also be built as a module. If so, the module | |
| will be called w83627ehf. | |
| config SENSORS_WM831X | |
| tristate "WM831x PMICs" | |
| depends on MFD_WM831X | |
| help | |
| If you say yes here you get support for the hardware | |
| monitoring functionality of the Wolfson Microelectronics | |
| WM831x series of PMICs. | |
| This driver can also be built as a module. If so, the module | |
| will be called wm831x-hwmon. | |
| config SENSORS_WM8350 | |
| tristate "Wolfson Microelectronics WM835x" | |
| depends on MFD_WM8350 | |
| help | |
| If you say yes here you get support for the hardware | |
| monitoring features of the WM835x series of PMICs. | |
| This driver can also be built as a module. If so, the module | |
| will be called wm8350-hwmon. | |
| config SENSORS_ULTRA45 | |
| tristate "Sun Ultra45 PIC16F747" | |
| depends on SPARC64 | |
| help | |
| This driver provides support for the Ultra45 workstation environmental | |
| sensors. | |
| config SENSORS_XGENE | |
| tristate "APM X-Gene SoC hardware monitoring driver" | |
| depends on XGENE_SLIMPRO_MBOX || PCC | |
| help | |
| If you say yes here you get support for the temperature | |
| and power sensors for APM X-Gene SoC. | |
| config SENSORS_YOGAFAN | |
| tristate "Lenovo Yoga Fan Hardware Monitoring" | |
| depends on ACPI && HWMON && DMI | |
| help | |
| If you say yes here you get support for fan speed monitoring | |
| on Lenovo Yoga, Legion, IdeaPad, Slim and LOQ laptops. | |
| The driver interfaces with the Embedded Controller via ACPI | |
| and uses a Rate-Limited Lag filter to smooth RPM readings. | |
| This driver can also be built as a module. If so, the module | |
| will be called yogafan. | |
| config SENSORS_INTEL_M10_BMC_HWMON | |
| tristate "Intel MAX10 BMC Hardware Monitoring" | |
| depends on MFD_INTEL_M10_BMC_CORE | |
| help | |
| This driver provides support for the hardware monitoring functionality | |
| on Intel MAX10 BMC chip. | |
| This BMC Chip is used on Intel FPGA PCIe Acceleration Cards (PAC). Its | |
| sensors monitor various telemetry data of different components on the | |
| card, e.g. board temperature, FPGA core temperature/voltage/current. | |
| if ACPI | |
| comment "ACPI drivers" | |
| config SENSORS_ACPI_POWER | |
| tristate "ACPI 4.0 power meter" | |
| help | |
| This driver exposes ACPI 4.0 power meters as hardware monitoring | |
| devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware | |
| and a power meter. | |
| To compile this driver as a module, choose M here: | |
| the module will be called acpi_power_meter. | |
| config SENSORS_ATK0110 | |
| tristate "ASUS ATK0110" | |
| depends on X86 | |
| help | |
| If you say yes here you get support for the ACPI hardware | |
| monitoring interface found in many ASUS motherboards. This | |
| driver will provide readings of fans, voltages and temperatures | |
| through the system firmware. | |
| This driver can also be built as a module. If so, the module | |
| will be called asus_atk0110. | |
| config SENSORS_ASUS_WMI | |
| tristate "ASUS WMI X370/X470/B450/X399" | |
| depends on ACPI_WMI | |
| help | |
| If you say yes here you get support for the ACPI hardware monitoring | |
| interface found in X370/X470/B450/X399 ASUS motherboards. This driver | |
| will provide readings of fans, voltages and temperatures through the system | |
| firmware. | |
| This driver can also be built as a module. If so, the module | |
| will be called asus_wmi_sensors. | |
| config SENSORS_ASUS_EC | |
| tristate "ASUS EC Sensors" | |
| depends on X86 | |
| depends on ACPI_EC | |
| help | |
| If you say yes here you get support for the ACPI embedded controller | |
| hardware monitoring interface found in some ASUS motherboards. This is | |
| where such sensors as water flow and temperature, optional fans, and | |
| additional temperature sensors (T_Sensor, chipset temperatures) | |
| find themselves. | |
| This driver can also be built as a module. If so, the module | |
| will be called asus_ec_sensors. | |
| config SENSORS_HP_WMI | |
| tristate "HP WMI Sensors" | |
| depends on ACPI_WMI | |
| help | |
| If you say yes here you get support for the ACPI hardware monitoring | |
| interface found in HP (and some HP Compaq) business-class computers. | |
| Available sensors vary between systems. Temperature and fan speed | |
| sensors are the most common. | |
| This driver can also be built as a module. If so, the module | |
| will be called hp_wmi_sensors. | |
| endif # ACPI | |
| endif # HWMON |