| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Acer Iconia Tab A500 Embedded Controller Driver | |
| * | |
| * Copyright 2020 GRATE-driver project | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/i2c.h> | |
| #include <linux/mfd/core.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/reboot.h> | |
| #include <linux/regmap.h> | |
| #define A500_EC_I2C_ERR_TIMEOUT 500 | |
| #define A500_EC_POWER_CMD_TIMEOUT 1000 | |
| /* | |
| * Controller's firmware expects specific command opcodes to be used for the | |
| * corresponding registers. Unsupported commands are skipped by the firmware. | |
| */ | |
| #define CMD_SHUTDOWN 0x0 | |
| #define CMD_WARM_REBOOT 0x0 | |
| #define CMD_COLD_REBOOT 0x1 | |
| enum { | |
| REG_CURRENT_NOW = 0x03, | |
| REG_SHUTDOWN = 0x52, | |
| REG_WARM_REBOOT = 0x54, | |
| REG_COLD_REBOOT = 0x55, | |
| }; | |
| static struct i2c_client *a500_ec_client_pm_off; | |
| static int a500_ec_read(void *context, const void *reg_buf, size_t reg_size, | |
| void *val_buf, size_t val_sizel) | |
| { | |
| struct i2c_client *client = context; | |
| unsigned int reg, retries = 5; | |
| u16 *ret_val = val_buf; | |
| s32 ret = 0; | |
| reg = *(u8 *)reg_buf; | |
| while (retries-- > 0) { | |
| ret = i2c_smbus_read_word_data(client, reg); | |
| if (ret >= 0) | |
| break; | |
| msleep(A500_EC_I2C_ERR_TIMEOUT); | |
| } | |
| if (ret < 0) { | |
| dev_err(&client->dev, "read 0x%x failed: %d\n", reg, ret); | |
| return ret; | |
| } | |
| *ret_val = ret; | |
| if (reg == REG_CURRENT_NOW) | |
| fsleep(10000); | |
| return 0; | |
| } | |
| static int a500_ec_write(void *context, const void *data, size_t count) | |
| { | |
| struct i2c_client *client = context; | |
| unsigned int reg, val, retries = 5; | |
| s32 ret = 0; | |
| reg = *(u8 *)(data + 0); | |
| val = *(u16 *)(data + 1); | |
| while (retries-- > 0) { | |
| ret = i2c_smbus_write_word_data(client, reg, val); | |
| if (ret >= 0) | |
| break; | |
| msleep(A500_EC_I2C_ERR_TIMEOUT); | |
| } | |
| if (ret < 0) { | |
| dev_err(&client->dev, "write 0x%x failed: %d\n", reg, ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static const struct regmap_config a500_ec_regmap_config = { | |
| .name = "KB930", | |
| .reg_bits = 8, | |
| .val_bits = 16, | |
| .max_register = 0xff, | |
| }; | |
| static const struct regmap_bus a500_ec_regmap_bus = { | |
| .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, | |
| .val_format_endian_default = REGMAP_ENDIAN_LITTLE, | |
| .write = a500_ec_write, | |
| .read = a500_ec_read, | |
| .max_raw_read = 2, | |
| }; | |
| static void a500_ec_poweroff(void) | |
| { | |
| i2c_smbus_write_word_data(a500_ec_client_pm_off, | |
| REG_SHUTDOWN, CMD_SHUTDOWN); | |
| mdelay(A500_EC_POWER_CMD_TIMEOUT); | |
| } | |
| static int a500_ec_restart_notify(struct notifier_block *this, | |
| unsigned long reboot_mode, void *data) | |
| { | |
| if (reboot_mode == REBOOT_WARM) | |
| i2c_smbus_write_word_data(a500_ec_client_pm_off, | |
| REG_WARM_REBOOT, CMD_WARM_REBOOT); | |
| else | |
| i2c_smbus_write_word_data(a500_ec_client_pm_off, | |
| REG_COLD_REBOOT, CMD_COLD_REBOOT); | |
| mdelay(A500_EC_POWER_CMD_TIMEOUT); | |
| return NOTIFY_DONE; | |
| } | |
| static struct notifier_block a500_ec_restart_handler = { | |
| .notifier_call = a500_ec_restart_notify, | |
| .priority = 200, | |
| }; | |
| static const struct mfd_cell a500_ec_cells[] = { | |
| { .name = "acer-a500-iconia-battery", }, | |
| { .name = "acer-a500-iconia-leds", }, | |
| }; | |
| static int a500_ec_probe(struct i2c_client *client) | |
| { | |
| struct regmap *regmap; | |
| int err; | |
| regmap = devm_regmap_init(&client->dev, &a500_ec_regmap_bus, | |
| client, &a500_ec_regmap_config); | |
| if (IS_ERR(regmap)) | |
| return PTR_ERR(regmap); | |
| err = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_AUTO, | |
| a500_ec_cells, ARRAY_SIZE(a500_ec_cells), | |
| NULL, 0, NULL); | |
| if (err) { | |
| dev_err(&client->dev, "failed to add sub-devices: %d\n", err); | |
| return err; | |
| } | |
| if (of_device_is_system_power_controller(client->dev.of_node)) { | |
| a500_ec_client_pm_off = client; | |
| err = register_restart_handler(&a500_ec_restart_handler); | |
| if (err) | |
| return err; | |
| if (!pm_power_off) | |
| pm_power_off = a500_ec_poweroff; | |
| } | |
| return 0; | |
| } | |
| static void a500_ec_remove(struct i2c_client *client) | |
| { | |
| if (of_device_is_system_power_controller(client->dev.of_node)) { | |
| if (pm_power_off == a500_ec_poweroff) | |
| pm_power_off = NULL; | |
| unregister_restart_handler(&a500_ec_restart_handler); | |
| } | |
| } | |
| static const struct of_device_id a500_ec_match[] = { | |
| { .compatible = "acer,a500-iconia-ec" }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, a500_ec_match); | |
| static struct i2c_driver a500_ec_driver = { | |
| .driver = { | |
| .name = "acer-a500-embedded-controller", | |
| .of_match_table = a500_ec_match, | |
| }, | |
| .probe = a500_ec_probe, | |
| .remove = a500_ec_remove, | |
| }; | |
| module_i2c_driver(a500_ec_driver); | |
| MODULE_DESCRIPTION("Acer Iconia Tab A500 Embedded Controller driver"); | |
| MODULE_AUTHOR("Dmitry Osipenko <digetx@gmail.com>"); | |
| MODULE_LICENSE("GPL"); |