| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * ck804xrom.c | |
| * | |
| * Normal mappings of chips in physical memory | |
| * | |
| * Dave Olsen <dolsen@lnxi.com> | |
| * Ryan Jackson <rjackson@lnxi.com> | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/types.h> | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <asm/io.h> | |
| #include <linux/mtd/mtd.h> | |
| #include <linux/mtd/map.h> | |
| #include <linux/mtd/cfi.h> | |
| #include <linux/mtd/flashchip.h> | |
| #include <linux/pci.h> | |
| #include <linux/pci_ids.h> | |
| #include <linux/list.h> | |
| #define MOD_NAME KBUILD_BASENAME | |
| #define ADDRESS_NAME_LEN 18 | |
| #define ROM_PROBE_STEP_SIZE (64*1024) | |
| #define DEV_CK804 1 | |
| #define DEV_MCP55 2 | |
| struct ck804xrom_window { | |
| void __iomem *virt; | |
| unsigned long phys; | |
| unsigned long size; | |
| struct list_head maps; | |
| struct resource rsrc; | |
| struct pci_dev *pdev; | |
| }; | |
| struct ck804xrom_map_info { | |
| struct list_head list; | |
| struct map_info map; | |
| struct mtd_info *mtd; | |
| struct resource rsrc; | |
| char map_name[sizeof(MOD_NAME) + 2 + ADDRESS_NAME_LEN]; | |
| }; | |
| /* | |
| * The following applies to ck804 only: | |
| * The 2 bits controlling the window size are often set to allow reading | |
| * the BIOS, but too small to allow writing, since the lock registers are | |
| * 4MiB lower in the address space than the data. | |
| * | |
| * This is intended to prevent flashing the bios, perhaps accidentally. | |
| * | |
| * This parameter allows the normal driver to override the BIOS settings. | |
| * | |
| * The bits are 6 and 7. If both bits are set, it is a 5MiB window. | |
| * If only the 7 Bit is set, it is a 4MiB window. Otherwise, a | |
| * 64KiB window. | |
| * | |
| * The following applies to mcp55 only: | |
| * The 15 bits controlling the window size are distributed as follows: | |
| * byte @0x88: bit 0..7 | |
| * byte @0x8c: bit 8..15 | |
| * word @0x90: bit 16..30 | |
| * If all bits are enabled, we have a 16? MiB window | |
| * Please set win_size_bits to 0x7fffffff if you actually want to do something | |
| */ | |
| static uint win_size_bits = 0; | |
| module_param(win_size_bits, uint, 0); | |
| MODULE_PARM_DESC(win_size_bits, "ROM window size bits override, normally set by BIOS."); | |
| static struct ck804xrom_window ck804xrom_window = { | |
| .maps = LIST_HEAD_INIT(ck804xrom_window.maps), | |
| }; | |
| static void ck804xrom_cleanup(struct ck804xrom_window *window) | |
| { | |
| struct ck804xrom_map_info *map, *scratch; | |
| u8 byte; | |
| if (window->pdev) { | |
| /* Disable writes through the rom window */ | |
| pci_read_config_byte(window->pdev, 0x6d, &byte); | |
| pci_write_config_byte(window->pdev, 0x6d, byte & ~1); | |
| } | |
| /* Free all of the mtd devices */ | |
| list_for_each_entry_safe(map, scratch, &window->maps, list) { | |
| if (map->rsrc.parent) | |
| release_resource(&map->rsrc); | |
| mtd_device_unregister(map->mtd); | |
| map_destroy(map->mtd); | |
| list_del(&map->list); | |
| kfree(map); | |
| } | |
| if (window->rsrc.parent) | |
| release_resource(&window->rsrc); | |
| if (window->virt) { | |
| iounmap(window->virt); | |
| window->virt = NULL; | |
| window->phys = 0; | |
| window->size = 0; | |
| } | |
| pci_dev_put(window->pdev); | |
| } | |
| static int __init ck804xrom_init_one(struct pci_dev *pdev, | |
| const struct pci_device_id *ent) | |
| { | |
| static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL }; | |
| u8 byte; | |
| u16 word; | |
| struct ck804xrom_window *window = &ck804xrom_window; | |
| struct ck804xrom_map_info *map = NULL; | |
| unsigned long map_top; | |
| /* Remember the pci dev I find the window in */ | |
| window->pdev = pci_dev_get(pdev); | |
| switch (ent->driver_data) { | |
| case DEV_CK804: | |
| /* Enable the selected rom window. This is often incorrectly | |
| * set up by the BIOS, and the 4MiB offset for the lock registers | |
| * requires the full 5MiB of window space. | |
| * | |
| * This 'write, then read' approach leaves the bits for | |
| * other uses of the hardware info. | |
| */ | |
| pci_read_config_byte(pdev, 0x88, &byte); | |
| pci_write_config_byte(pdev, 0x88, byte | win_size_bits ); | |
| /* Assume the rom window is properly setup, and find it's size */ | |
| pci_read_config_byte(pdev, 0x88, &byte); | |
| if ((byte & ((1<<7)|(1<<6))) == ((1<<7)|(1<<6))) | |
| window->phys = 0xffb00000; /* 5MiB */ | |
| else if ((byte & (1<<7)) == (1<<7)) | |
| window->phys = 0xffc00000; /* 4MiB */ | |
| else | |
| window->phys = 0xffff0000; /* 64KiB */ | |
| break; | |
| case DEV_MCP55: | |
| pci_read_config_byte(pdev, 0x88, &byte); | |
| pci_write_config_byte(pdev, 0x88, byte | (win_size_bits & 0xff)); | |
| pci_read_config_byte(pdev, 0x8c, &byte); | |
| pci_write_config_byte(pdev, 0x8c, byte | ((win_size_bits & 0xff00) >> 8)); | |
| pci_read_config_word(pdev, 0x90, &word); | |
| pci_write_config_word(pdev, 0x90, word | ((win_size_bits & 0x7fff0000) >> 16)); | |
| window->phys = 0xff000000; /* 16MiB, hardcoded for now */ | |
| break; | |
| } | |
| window->size = 0xffffffffUL - window->phys + 1UL; | |
| /* | |
| * Try to reserve the window mem region. If this fails then | |
| * it is likely due to a fragment of the window being | |
| * "reserved" by the BIOS. In the case that the | |
| * request_mem_region() fails then once the rom size is | |
| * discovered we will try to reserve the unreserved fragment. | |
| */ | |
| window->rsrc.name = MOD_NAME; | |
| window->rsrc.start = window->phys; | |
| window->rsrc.end = window->phys + window->size - 1; | |
| window->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY; | |
| if (request_resource(&iomem_resource, &window->rsrc)) { | |
| window->rsrc.parent = NULL; | |
| printk(KERN_ERR MOD_NAME | |
| " %s(): Unable to register resource %pR - kernel bug?\n", | |
| __func__, &window->rsrc); | |
| } | |
| /* Enable writes through the rom window */ | |
| pci_read_config_byte(pdev, 0x6d, &byte); | |
| pci_write_config_byte(pdev, 0x6d, byte | 1); | |
| /* FIXME handle registers 0x80 - 0x8C the bios region locks */ | |
| /* For write accesses caches are useless */ | |
| window->virt = ioremap(window->phys, window->size); | |
| if (!window->virt) { | |
| printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n", | |
| window->phys, window->size); | |
| goto out; | |
| } | |
| /* Get the first address to look for a rom chip at */ | |
| map_top = window->phys; | |
| #if 1 | |
| /* The probe sequence run over the firmware hub lock | |
| * registers sets them to 0x7 (no access). | |
| * Probe at most the last 4MiB of the address space. | |
| */ | |
| if (map_top < 0xffc00000) | |
| map_top = 0xffc00000; | |
| #endif | |
| /* Loop through and look for rom chips. Since we don't know the | |
| * starting address for each chip, probe every ROM_PROBE_STEP_SIZE | |
| * bytes from the starting address of the window. | |
| */ | |
| while((map_top - 1) < 0xffffffffUL) { | |
| struct cfi_private *cfi; | |
| unsigned long offset; | |
| int i; | |
| if (!map) { | |
| map = kmalloc_obj(*map); | |
| if (!map) | |
| goto out; | |
| } | |
| memset(map, 0, sizeof(*map)); | |
| INIT_LIST_HEAD(&map->list); | |
| map->map.name = map->map_name; | |
| map->map.phys = map_top; | |
| offset = map_top - window->phys; | |
| map->map.virt = (void __iomem *) | |
| (((unsigned long)(window->virt)) + offset); | |
| map->map.size = 0xffffffffUL - map_top + 1UL; | |
| /* Set the name of the map to the address I am trying */ | |
| sprintf(map->map_name, "%s @%08Lx", | |
| MOD_NAME, (unsigned long long)map->map.phys); | |
| /* There is no generic VPP support */ | |
| for(map->map.bankwidth = 32; map->map.bankwidth; | |
| map->map.bankwidth >>= 1) | |
| { | |
| char **probe_type; | |
| /* Skip bankwidths that are not supported */ | |
| if (!map_bankwidth_supported(map->map.bankwidth)) | |
| continue; | |
| /* Setup the map methods */ | |
| simple_map_init(&map->map); | |
| /* Try all of the probe methods */ | |
| probe_type = rom_probe_types; | |
| for(; *probe_type; probe_type++) { | |
| map->mtd = do_map_probe(*probe_type, &map->map); | |
| if (map->mtd) | |
| goto found; | |
| } | |
| } | |
| map_top += ROM_PROBE_STEP_SIZE; | |
| continue; | |
| found: | |
| /* Trim the size if we are larger than the map */ | |
| if (map->mtd->size > map->map.size) { | |
| printk(KERN_WARNING MOD_NAME | |
| " rom(%llu) larger than window(%lu). fixing...\n", | |
| (unsigned long long)map->mtd->size, map->map.size); | |
| map->mtd->size = map->map.size; | |
| } | |
| if (window->rsrc.parent) { | |
| /* | |
| * Registering the MTD device in iomem may not be possible | |
| * if there is a BIOS "reserved" and BUSY range. If this | |
| * fails then continue anyway. | |
| */ | |
| map->rsrc.name = map->map_name; | |
| map->rsrc.start = map->map.phys; | |
| map->rsrc.end = map->map.phys + map->mtd->size - 1; | |
| map->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY; | |
| if (request_resource(&window->rsrc, &map->rsrc)) { | |
| printk(KERN_ERR MOD_NAME | |
| ": cannot reserve MTD resource\n"); | |
| map->rsrc.parent = NULL; | |
| } | |
| } | |
| /* Make the whole region visible in the map */ | |
| map->map.virt = window->virt; | |
| map->map.phys = window->phys; | |
| cfi = map->map.fldrv_priv; | |
| for(i = 0; i < cfi->numchips; i++) | |
| cfi->chips[i].start += offset; | |
| /* Now that the mtd devices is complete claim and export it */ | |
| map->mtd->owner = THIS_MODULE; | |
| if (mtd_device_register(map->mtd, NULL, 0)) { | |
| map_destroy(map->mtd); | |
| map->mtd = NULL; | |
| goto out; | |
| } | |
| /* Calculate the new value of map_top */ | |
| map_top += map->mtd->size; | |
| /* File away the map structure */ | |
| list_add(&map->list, &window->maps); | |
| map = NULL; | |
| } | |
| out: | |
| /* Free any left over map structures */ | |
| kfree(map); | |
| /* See if I have any map structures */ | |
| if (list_empty(&window->maps)) { | |
| ck804xrom_cleanup(window); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| static void ck804xrom_remove_one(struct pci_dev *pdev) | |
| { | |
| struct ck804xrom_window *window = &ck804xrom_window; | |
| ck804xrom_cleanup(window); | |
| } | |
| static const struct pci_device_id ck804xrom_pci_tbl[] = { | |
| { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0051), .driver_data = DEV_CK804 }, | |
| { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0360), .driver_data = DEV_MCP55 }, | |
| { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0361), .driver_data = DEV_MCP55 }, | |
| { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0362), .driver_data = DEV_MCP55 }, | |
| { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0363), .driver_data = DEV_MCP55 }, | |
| { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0364), .driver_data = DEV_MCP55 }, | |
| { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0365), .driver_data = DEV_MCP55 }, | |
| { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0366), .driver_data = DEV_MCP55 }, | |
| { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0367), .driver_data = DEV_MCP55 }, | |
| { } | |
| }; | |
| #if 0 | |
| MODULE_DEVICE_TABLE(pci, ck804xrom_pci_tbl); | |
| static struct pci_driver ck804xrom_driver = { | |
| .name = MOD_NAME, | |
| .id_table = ck804xrom_pci_tbl, | |
| .probe = ck804xrom_init_one, | |
| .remove = ck804xrom_remove_one, | |
| }; | |
| #endif | |
| static int __init init_ck804xrom(void) | |
| { | |
| struct pci_dev *pdev; | |
| const struct pci_device_id *id; | |
| int retVal; | |
| pdev = NULL; | |
| for(id = ck804xrom_pci_tbl; id->vendor; id++) { | |
| pdev = pci_get_device(id->vendor, id->device, NULL); | |
| if (pdev) | |
| break; | |
| } | |
| if (pdev) { | |
| retVal = ck804xrom_init_one(pdev, id); | |
| pci_dev_put(pdev); | |
| return retVal; | |
| } | |
| return -ENXIO; | |
| #if 0 | |
| return pci_register_driver(&ck804xrom_driver); | |
| #endif | |
| } | |
| static void __exit cleanup_ck804xrom(void) | |
| { | |
| ck804xrom_remove_one(ck804xrom_window.pdev); | |
| } | |
| module_init(init_ck804xrom); | |
| module_exit(cleanup_ck804xrom); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Eric Biederman <ebiederman@lnxi.com>, Dave Olsen <dolsen@lnxi.com>"); | |
| MODULE_DESCRIPTION("MTD map driver for BIOS chips on the Nvidia ck804 southbridge"); | |