| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Clk driver for NXP LPC18xx/43xx Configuration Registers (CREG) | |
| * | |
| * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com> | |
| */ | |
| #include <linux/clk-provider.h> | |
| #include <linux/delay.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mfd/syscon.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regmap.h> | |
| #define LPC18XX_CREG_CREG0 0x004 | |
| #define LPC18XX_CREG_CREG0_EN1KHZ BIT(0) | |
| #define LPC18XX_CREG_CREG0_EN32KHZ BIT(1) | |
| #define LPC18XX_CREG_CREG0_RESET32KHZ BIT(2) | |
| #define LPC18XX_CREG_CREG0_PD32KHZ BIT(3) | |
| #define to_clk_creg(_hw) container_of(_hw, struct clk_creg_data, hw) | |
| enum { | |
| CREG_CLK_1KHZ, | |
| CREG_CLK_32KHZ, | |
| CREG_CLK_MAX, | |
| }; | |
| struct clk_creg_data { | |
| struct clk_hw hw; | |
| const char *name; | |
| struct regmap *reg; | |
| unsigned int en_mask; | |
| const struct clk_ops *ops; | |
| }; | |
| #define CREG_CLK(_name, _emask, _ops) \ | |
| { \ | |
| .name = _name, \ | |
| .en_mask = LPC18XX_CREG_CREG0_##_emask, \ | |
| .ops = &_ops, \ | |
| } | |
| static int clk_creg_32k_prepare(struct clk_hw *hw) | |
| { | |
| struct clk_creg_data *creg = to_clk_creg(hw); | |
| int ret; | |
| ret = regmap_update_bits(creg->reg, LPC18XX_CREG_CREG0, | |
| LPC18XX_CREG_CREG0_PD32KHZ | | |
| LPC18XX_CREG_CREG0_RESET32KHZ, 0); | |
| /* | |
| * Powering up the 32k oscillator takes a long while | |
| * and sadly there aren't any status bit to poll. | |
| */ | |
| msleep(2500); | |
| return ret; | |
| } | |
| static void clk_creg_32k_unprepare(struct clk_hw *hw) | |
| { | |
| struct clk_creg_data *creg = to_clk_creg(hw); | |
| regmap_update_bits(creg->reg, LPC18XX_CREG_CREG0, | |
| LPC18XX_CREG_CREG0_PD32KHZ, | |
| LPC18XX_CREG_CREG0_PD32KHZ); | |
| } | |
| static int clk_creg_32k_is_prepared(struct clk_hw *hw) | |
| { | |
| struct clk_creg_data *creg = to_clk_creg(hw); | |
| u32 reg; | |
| regmap_read(creg->reg, LPC18XX_CREG_CREG0, ®); | |
| return !(reg & LPC18XX_CREG_CREG0_PD32KHZ) && | |
| !(reg & LPC18XX_CREG_CREG0_RESET32KHZ); | |
| } | |
| static unsigned long clk_creg_1k_recalc_rate(struct clk_hw *hw, | |
| unsigned long parent_rate) | |
| { | |
| return parent_rate / 32; | |
| } | |
| static int clk_creg_enable(struct clk_hw *hw) | |
| { | |
| struct clk_creg_data *creg = to_clk_creg(hw); | |
| return regmap_update_bits(creg->reg, LPC18XX_CREG_CREG0, | |
| creg->en_mask, creg->en_mask); | |
| } | |
| static void clk_creg_disable(struct clk_hw *hw) | |
| { | |
| struct clk_creg_data *creg = to_clk_creg(hw); | |
| regmap_update_bits(creg->reg, LPC18XX_CREG_CREG0, | |
| creg->en_mask, 0); | |
| } | |
| static int clk_creg_is_enabled(struct clk_hw *hw) | |
| { | |
| struct clk_creg_data *creg = to_clk_creg(hw); | |
| u32 reg; | |
| regmap_read(creg->reg, LPC18XX_CREG_CREG0, ®); | |
| return !!(reg & creg->en_mask); | |
| } | |
| static const struct clk_ops clk_creg_32k = { | |
| .enable = clk_creg_enable, | |
| .disable = clk_creg_disable, | |
| .is_enabled = clk_creg_is_enabled, | |
| .prepare = clk_creg_32k_prepare, | |
| .unprepare = clk_creg_32k_unprepare, | |
| .is_prepared = clk_creg_32k_is_prepared, | |
| }; | |
| static const struct clk_ops clk_creg_1k = { | |
| .enable = clk_creg_enable, | |
| .disable = clk_creg_disable, | |
| .is_enabled = clk_creg_is_enabled, | |
| .recalc_rate = clk_creg_1k_recalc_rate, | |
| }; | |
| static struct clk_creg_data clk_creg_clocks[] = { | |
| [CREG_CLK_1KHZ] = CREG_CLK("1khz_clk", EN1KHZ, clk_creg_1k), | |
| [CREG_CLK_32KHZ] = CREG_CLK("32khz_clk", EN32KHZ, clk_creg_32k), | |
| }; | |
| static struct clk *clk_register_creg_clk(struct device *dev, | |
| struct clk_creg_data *creg_clk, | |
| const char **parent_name, | |
| struct regmap *syscon) | |
| { | |
| struct clk_init_data init; | |
| init.ops = creg_clk->ops; | |
| init.name = creg_clk->name; | |
| init.parent_names = parent_name; | |
| init.num_parents = 1; | |
| init.flags = 0; | |
| creg_clk->reg = syscon; | |
| creg_clk->hw.init = &init; | |
| if (dev) | |
| return devm_clk_register(dev, &creg_clk->hw); | |
| return clk_register(NULL, &creg_clk->hw); | |
| } | |
| static struct clk *clk_creg_early[CREG_CLK_MAX]; | |
| static struct clk_onecell_data clk_creg_early_data = { | |
| .clks = clk_creg_early, | |
| .clk_num = CREG_CLK_MAX, | |
| }; | |
| static void __init lpc18xx_creg_clk_init(struct device_node *np) | |
| { | |
| const char *clk_32khz_parent; | |
| struct regmap *syscon; | |
| syscon = syscon_node_to_regmap(np->parent); | |
| if (IS_ERR(syscon)) { | |
| pr_err("%s: syscon lookup failed\n", __func__); | |
| return; | |
| } | |
| clk_32khz_parent = of_clk_get_parent_name(np, 0); | |
| clk_creg_early[CREG_CLK_32KHZ] = | |
| clk_register_creg_clk(NULL, &clk_creg_clocks[CREG_CLK_32KHZ], | |
| &clk_32khz_parent, syscon); | |
| clk_creg_early[CREG_CLK_1KHZ] = ERR_PTR(-EPROBE_DEFER); | |
| of_clk_add_provider(np, of_clk_src_onecell_get, &clk_creg_early_data); | |
| } | |
| CLK_OF_DECLARE_DRIVER(lpc18xx_creg_clk, "nxp,lpc1850-creg-clk", | |
| lpc18xx_creg_clk_init); | |
| static struct clk *clk_creg[CREG_CLK_MAX]; | |
| static struct clk_onecell_data clk_creg_data = { | |
| .clks = clk_creg, | |
| .clk_num = CREG_CLK_MAX, | |
| }; | |
| static int lpc18xx_creg_clk_probe(struct platform_device *pdev) | |
| { | |
| struct device_node *np = pdev->dev.of_node; | |
| struct regmap *syscon; | |
| syscon = syscon_node_to_regmap(np->parent); | |
| if (IS_ERR(syscon)) { | |
| dev_err(&pdev->dev, "syscon lookup failed\n"); | |
| return PTR_ERR(syscon); | |
| } | |
| clk_creg[CREG_CLK_32KHZ] = clk_creg_early[CREG_CLK_32KHZ]; | |
| clk_creg[CREG_CLK_1KHZ] = | |
| clk_register_creg_clk(NULL, &clk_creg_clocks[CREG_CLK_1KHZ], | |
| &clk_creg_clocks[CREG_CLK_32KHZ].name, | |
| syscon); | |
| return of_clk_add_provider(np, of_clk_src_onecell_get, &clk_creg_data); | |
| } | |
| static const struct of_device_id lpc18xx_creg_clk_of_match[] = { | |
| { .compatible = "nxp,lpc1850-creg-clk" }, | |
| {}, | |
| }; | |
| static struct platform_driver lpc18xx_creg_clk_driver = { | |
| .probe = lpc18xx_creg_clk_probe, | |
| .driver = { | |
| .name = "lpc18xx-creg-clk", | |
| .of_match_table = lpc18xx_creg_clk_of_match, | |
| }, | |
| }; | |
| builtin_platform_driver(lpc18xx_creg_clk_driver); |