| # SPDX-License-Identifier: GPL-2.0-only | |
| # | |
| # HID driver configuration | |
| # | |
| menuconfig HID_SUPPORT | |
| bool "HID bus support" | |
| default y | |
| depends on INPUT | |
| help | |
| This option adds core support for human interface device (HID). | |
| You will also need drivers from the following menu to make use of it. | |
| if HID_SUPPORT | |
| config HID | |
| tristate "HID bus core support" | |
| default y | |
| depends on INPUT | |
| help | |
| A human interface device (HID) is a type of computer device that | |
| interacts directly with and takes input from humans. The term "HID" | |
| most commonly used to refer to the USB-HID specification, but other | |
| devices (such as, but not strictly limited to, Bluetooth) are | |
| designed using HID specification (this involves certain keyboards, | |
| mice, tablets, etc). This option adds the HID bus to the kernel, | |
| together with generic HID layer code. The HID devices are added and | |
| removed from the HID bus by the transport-layer drivers, such as | |
| usbhid (USB_HID) and hidp (BT_HIDP). | |
| For docs and specs, see https://www.usb.org/developers/hidpage/ | |
| If unsure, say Y. | |
| if HID | |
| config HID_BATTERY_STRENGTH | |
| bool "Battery level reporting for HID devices" | |
| select POWER_SUPPLY | |
| default n | |
| help | |
| This option adds support of reporting battery strength (for HID devices | |
| that support this feature) through power_supply class so that userspace | |
| tools, such as upower, can display it. | |
| config HIDRAW | |
| bool "/dev/hidraw raw HID device support" | |
| help | |
| Say Y here if you want to support HID devices (from the USB | |
| specification standpoint) that aren't strictly user interface | |
| devices, like monitor controls and Uninterruptible Power Supplies. | |
| This module supports these devices separately using a separate | |
| event interface on /dev/hidraw. | |
| There is also a /dev/hiddev configuration option in the USB HID | |
| configuration menu. In comparison to hiddev, this device does not process | |
| the hid events at all (no parsing, no lookups). This lets applications | |
| to work on raw hid events when they want to, and avoid using transport-specific | |
| userspace libhid/libusb libraries. | |
| If unsure, say Y. | |
| config UHID | |
| tristate "User-space I/O driver support for HID subsystem" | |
| default n | |
| help | |
| Say Y here if you want to provide HID I/O Drivers from user-space. | |
| This allows to write I/O drivers in user-space and feed the data from | |
| the device into the kernel. The kernel parses the HID reports, loads the | |
| corresponding HID Device Driver or provides input devices on top of your | |
| user-space device. | |
| This driver cannot be used to parse HID-reports in user-space and write | |
| special HID-drivers. You should use hidraw for that. | |
| Instead, this driver allows to write the transport-layer driver in | |
| user-space like USB-HID and Bluetooth-HID do in kernel-space. | |
| If unsure, say N. | |
| To compile this driver as a module, choose M here: the | |
| module will be called uhid. | |
| config HID_GENERIC | |
| tristate "Generic HID driver" | |
| default HID | |
| help | |
| Support for generic devices on the HID bus. This includes most | |
| keyboards and mice, joysticks, tablets and digitizers. | |
| To compile this driver as a module, choose M here: the module | |
| will be called hid-generic. | |
| If unsure, say Y. | |
| config HID_HAPTIC | |
| bool "Haptic touchpad support" | |
| default n | |
| help | |
| Support for touchpads with force sensors and haptic actuators instead of a | |
| traditional button. | |
| Adds extra parsing and FF device for the hid multitouch driver. | |
| It can be used for Elan 2703 haptic touchpad. | |
| If unsure, say N. | |
| menu "Special HID drivers" | |
| config HID_A4TECH | |
| tristate "A4TECH mice" | |
| help | |
| Support for some A4TECH mice with two scroll wheels. | |
| config HID_ACCUTOUCH | |
| tristate "Accutouch touch device" | |
| depends on USB_HID | |
| help | |
| This selects a driver for the Accutouch 2216 touch controller. | |
| The driver works around a problem in the reported device capabilities | |
| which causes userspace to detect the device as a mouse rather than | |
| a touchscreen. | |
| Say Y here if you have a Accutouch 2216 touch controller. | |
| config HID_ACRUX | |
| tristate "ACRUX game controller support" | |
| help | |
| Say Y here if you want to enable support for ACRUX game controllers. | |
| config HID_ACRUX_FF | |
| bool "ACRUX force feedback support" | |
| depends on HID_ACRUX | |
| select INPUT_FF_MEMLESS | |
| help | |
| Say Y here if you want to enable force feedback support for ACRUX | |
| game controllers. | |
| config HID_APPLE | |
| tristate "Apple {i,Power,Mac}Books" | |
| depends on LEDS_CLASS | |
| depends on NEW_LEDS | |
| help | |
| Support for some Apple devices which less or more break | |
| HID specification. | |
| Say Y here if you want support for keyboards of Apple iBooks, PowerBooks, | |
| MacBooks, MacBook Pros and Apple Aluminum. | |
| config HID_APPLEIR | |
| tristate "Apple infrared receiver" | |
| depends on (USB_HID) | |
| help | |
| Support for Apple infrared remote control. All the Apple computers from | |
| 2005 onwards include such a port, except the unibody Macbook (2009), | |
| and Mac Pros. This receiver is also used in the Apple TV set-top box | |
| prior to the 2010 model. | |
| Say Y here if you want support for Apple infrared remote control. | |
| config HID_APPLETB_BL | |
| tristate "Apple Touch Bar Backlight" | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| depends on X86 || COMPILE_TEST | |
| help | |
| Say Y here if you want support for the backlight of Touch Bars on x86 | |
| MacBook Pros. | |
| To compile this driver as a module, choose M here: the | |
| module will be called hid-appletb-bl. | |
| config HID_APPLETB_KBD | |
| tristate "Apple Touch Bar Keyboard Mode" | |
| depends on USB_HID | |
| depends on BACKLIGHT_CLASS_DEVICE | |
| depends on INPUT | |
| depends on X86 || COMPILE_TEST | |
| select INPUT_SPARSEKMAP | |
| select HID_APPLETB_BL | |
| help | |
| Say Y here if you want support for the keyboard mode (escape, | |
| function, media and brightness keys) of Touch Bars on x86 MacBook | |
| Pros. | |
| To compile this driver as a module, choose M here: the | |
| module will be called hid-appletb-kbd. | |
| config HID_ASUS | |
| tristate "Asus" | |
| depends on USB_HID | |
| depends on LEDS_CLASS | |
| depends on ASUS_WMI || ASUS_WMI=n | |
| select POWER_SUPPLY | |
| help | |
| Support for Asus notebook built-in keyboard and touchpad via i2c, and | |
| the Asus Republic of Gamers laptop keyboard special keys. | |
| Supported devices: | |
| - EeeBook X205TA | |
| - VivoBook E200HA | |
| - GL553V series | |
| - GL753V series | |
| config HID_AUREAL | |
| tristate "Aureal" | |
| help | |
| Support for Aureal Cy se W-01RN Remote Controller and other Aureal derived remotes. | |
| config HID_BELKIN | |
| tristate "Belkin Flip KVM and Wireless keyboard" | |
| help | |
| Support for Belkin Flip KVM and Wireless keyboard. | |
| config HID_BETOP_FF | |
| tristate "Betop Production Inc. force feedback support" | |
| depends on USB_HID | |
| select INPUT_FF_MEMLESS | |
| help | |
| Say Y here if you want to enable force feedback support for devices by | |
| BETOP Production Ltd. | |
| Currently the following devices are known to be supported: | |
| - BETOP 2185 PC & BFM MODE | |
| config HID_BIGBEN_FF | |
| tristate "BigBen Interactive Kids' gamepad support" | |
| depends on USB_HID | |
| depends on NEW_LEDS | |
| depends on LEDS_CLASS | |
| select INPUT_FF_MEMLESS | |
| help | |
| Support for the "Kid-friendly Wired Controller" PS3OFMINIPAD | |
| gamepad made by BigBen Interactive, originally sold as a PS3 | |
| accessory. This driver fixes input mapping and adds support for | |
| force feedback effects and LEDs on the device. | |
| config HID_CHERRY | |
| tristate "Cherry Cymotion keyboard" | |
| help | |
| Support for Cherry Cymotion keyboard. | |
| config HID_CHICONY | |
| tristate "Chicony devices" | |
| depends on USB_HID | |
| help | |
| Support for Chicony Tactical pad and special keys on Chicony keyboards. | |
| config HID_CORSAIR | |
| tristate "Corsair devices" | |
| depends on USB_HID && LEDS_CLASS | |
| select POWER_SUPPLY | |
| help | |
| Support for Corsair devices that are not fully compliant with the | |
| HID standard. | |
| Support for Corsair Void headsets. | |
| Supported devices: | |
| - Vengeance K90 | |
| - Scimitar PRO RGB | |
| - Corsair Void headsets | |
| config HID_COUGAR | |
| tristate "Cougar devices" | |
| help | |
| Support for Cougar devices that are not fully compliant with the | |
| HID standard. | |
| Supported devices: | |
| - Cougar 500k Gaming Keyboard | |
| config HID_MACALLY | |
| tristate "Macally devices" | |
| help | |
| Support for Macally devices that are not fully compliant with the | |
| HID standard. | |
| supported devices: | |
| - Macally ikey keyboard | |
| config HID_PRODIKEYS | |
| tristate "Prodikeys PC-MIDI Keyboard support" | |
| depends on USB_HID && SND | |
| select SND_RAWMIDI | |
| help | |
| Support for Prodikeys PC-MIDI Keyboard device support. | |
| Say Y here to enable support for this device. | |
| - Prodikeys PC-MIDI keyboard. | |
| The Prodikeys PC-MIDI acts as a USB Audio device, with one MIDI | |
| input and one MIDI output. These MIDI jacks appear as | |
| a sound "card" in the ALSA sound system. | |
| Note: if you say N here, this device will still function as a basic | |
| multimedia keyboard, but will lack support for the musical keyboard | |
| and some additional multimedia keys. | |
| config HID_CMEDIA | |
| tristate "CMedia audio chips" | |
| help | |
| Support for CMedia CM6533 HID audio jack controls | |
| and HS100B mute buttons. | |
| config HID_CP2112 | |
| tristate "Silicon Labs CP2112 HID USB-to-SMBus Bridge support" | |
| depends on USB_HID && HIDRAW && I2C && GPIOLIB | |
| select GPIOLIB_IRQCHIP | |
| help | |
| Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge. | |
| This is a HID device driver which registers as an i2c adapter | |
| and gpiochip to expose these functions of the CP2112. The | |
| customizable USB descriptor fields are exposed as sysfs attributes. | |
| config HID_CREATIVE_SB0540 | |
| tristate "Creative SB0540 infrared receiver" | |
| depends on USB_HID | |
| help | |
| Support for Creative infrared SB0540-compatible remote controls, such | |
| as the RM-1500 and RM-1800 remotes. | |
| Say Y here if you want support for Creative SB0540 infrared receiver. | |
| config HID_CYPRESS | |
| tristate "Cypress mouse and barcode readers" | |
| help | |
| Support for cypress mouse and barcode readers. | |
| config HID_DRAGONRISE | |
| tristate "DragonRise Inc. game controller" | |
| help | |
| Say Y here if you have DragonRise Inc. game controllers. | |
| These might be branded as: | |
| - Tesun USB-703 | |
| - Media-tech MT1504 "Rogue" | |
| - DVTech JS19 "Gear" | |
| - Defender Game Master | |
| config DRAGONRISE_FF | |
| bool "DragonRise Inc. force feedback" | |
| depends on HID_DRAGONRISE | |
| select INPUT_FF_MEMLESS | |
| help | |
| Say Y here if you want to enable force feedback support for DragonRise Inc. | |
| game controllers. | |
| config HID_EMS_FF | |
| tristate "EMS Production Inc. force feedback support" | |
| select INPUT_FF_MEMLESS | |
| help | |
| Say Y here if you want to enable force feedback support for devices by | |
| EMS Production Ltd. | |
| Currently the following devices are known to be supported: | |
| - Trio Linker Plus II | |
| config HID_ELAN | |
| tristate "ELAN USB Touchpad Support" | |
| depends on LEDS_CLASS && USB_HID | |
| help | |
| Say Y to enable support for the USB ELAN touchpad | |
| Currently the following devices are known to be supported: | |
| - HP Pavilion X2 10-p0XX. | |
| config HID_ELECOM | |
| tristate "ELECOM HID devices" | |
| help | |
| Support for ELECOM devices: | |
| - BM084 Bluetooth Mouse | |
| - EX-G Trackballs (M-XT3DRBK, M-XT3URBK) | |
| - DEFT Trackballs (M-DT1DRBK, M-DT1URBK, M-DT2DRBK, M-DT2URBK) | |
| - HUGE Trackballs (M-HT1DRBK, M-HT1URBK) | |
| - HUGE Plus Trackball (M-HT1MRBK) | |
| config HID_ELO | |
| tristate "ELO USB 4000/4500 touchscreen" | |
| depends on USB_HID | |
| help | |
| Support for the ELO USB 4000/4500 touchscreens. Note that this is for | |
| different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO. | |
| config HID_EVISION | |
| tristate "EVision Keyboards Support" | |
| depends on HID | |
| help | |
| Support for some EVision keyboards. Note that this is needed only when | |
| applying customization using userspace programs. | |
| Support for some EVision devices requiring report descriptor fixups. | |
| config HID_EZKEY | |
| tristate "Ezkey BTC 8193 keyboard" | |
| help | |
| Support for Ezkey BTC 8193 keyboard. | |
| config HID_FT260 | |
| tristate "FTDI FT260 USB HID to I2C host support" | |
| depends on USB_HID && HIDRAW && I2C | |
| help | |
| Provides I2C host adapter functionality over USB-HID through FT260 | |
| device. The customizable USB descriptor fields are exposed as sysfs | |
| attributes. | |
| To compile this driver as a module, choose M here: the module | |
| will be called hid-ft260. | |
| config HID_GEMBIRD | |
| tristate "Gembird Joypad" | |
| help | |
| Support for Gembird JPD-DualForce 2. | |
| config HID_GFRM | |
| tristate "Google Fiber TV Box remote control support" | |
| help | |
| Support for Google Fiber TV Box remote controls | |
| config HID_GLORIOUS | |
| tristate "Glorious PC Gaming Race mice" | |
| help | |
| Support for Glorious PC Gaming Race mice such as | |
| the Glorious Model O, O- and D. | |
| config HID_HOLTEK | |
| tristate "Holtek HID devices" | |
| depends on USB_HID | |
| help | |
| Support for Holtek based devices: | |
| - Holtek On Line Grip based game controller | |
| - Trust GXT 18 Gaming Keyboard | |
| - Sharkoon Drakonia / Perixx MX-2000 gaming mice | |
| - Tracer Sniper TRM-503 / NOVA Gaming Slider X200 / | |
| Zalman ZM-GM1 | |
| - SHARKOON DarkGlider Gaming mouse | |
| - LEETGION Hellion Gaming Mouse | |
| config HOLTEK_FF | |
| bool "Holtek On Line Grip force feedback support" | |
| depends on HID_HOLTEK | |
| select INPUT_FF_MEMLESS | |
| help | |
| Say Y here if you have a Holtek On Line Grip based game controller | |
| and want to have force feedback support for it. | |
| config HID_VIVALDI_COMMON | |
| tristate | |
| help | |
| ChromeOS Vivaldi HID parsing support library. This is a hidden | |
| option so that drivers can use common code to parse the HID | |
| descriptors for vivaldi function row keymap. | |
| config HID_GOODIX_SPI | |
| tristate "Goodix GT7986U SPI HID touchscreen" | |
| depends on SPI_MASTER | |
| help | |
| Support for Goodix GT7986U SPI HID touchscreen device. | |
| config HID_GOOGLE_HAMMER | |
| tristate "Google Hammer Keyboard" | |
| select HID_VIVALDI_COMMON | |
| select INPUT_VIVALDIFMAP | |
| depends on USB_HID && LEDS_CLASS && CROS_EC | |
| help | |
| Say Y here if you have a Google Hammer device. | |
| config HID_GOOGLE_STADIA_FF | |
| tristate "Google Stadia force feedback" | |
| select INPUT_FF_MEMLESS | |
| help | |
| Say Y here if you want to enable force feedback support for the Google | |
| Stadia controller. | |
| config HID_VIVALDI | |
| tristate "Vivaldi Keyboard" | |
| select HID_VIVALDI_COMMON | |
| select INPUT_VIVALDIFMAP | |
| help | |
| Say Y here if you want to enable support for Vivaldi keyboards. | |
| Vivaldi keyboards use a vendor-specific (Google) HID usage to report | |
| how the keys in the top row are physically ordered. | |
| config HID_GT683R | |
| tristate "MSI GT68xR LED support" | |
| depends on LEDS_CLASS && USB_HID | |
| help | |
| Say Y here if you want to enable support for the three MSI GT68xR LEDs | |
| This driver support following modes: | |
| - Normal: LEDs are fully on when enabled | |
| - Audio: LEDs brightness depends on sound level | |
| - Breathing: LEDs brightness varies at human breathing rate | |
| Currently the following devices are know to be supported: | |
| - MSI GT683R | |
| config HID_KEYTOUCH | |
| tristate "Keytouch HID devices" | |
| help | |
| Support for Keytouch HID devices not fully compliant with | |
| the specification. Currently supported: | |
| - Keytouch IEC 60945 | |
| config HID_KYE | |
| tristate "KYE/Genius devices" | |
| help | |
| Support for KYE/Genius devices not fully compliant with HID standard: | |
| - Ergo Mouse | |
| - EasyPen i405X tablet | |
| - MousePen i608X tablet | |
| - EasyPen M610X tablet | |
| config HID_KYSONA | |
| tristate "Kysona devices" | |
| depends on USB_HID | |
| help | |
| Support for Kysona mice. | |
| Say Y here if you have a Kysona M600 mouse | |
| and want to be able to read its battery capacity. | |
| config HID_UCLOGIC | |
| tristate "UC-Logic" | |
| depends on USB_HID | |
| help | |
| Support for UC-Logic and Huion tablets. | |
| config HID_WALTOP | |
| tristate "Waltop" | |
| help | |
| Support for Waltop tablets. | |
| config HID_VIEWSONIC | |
| tristate "ViewSonic/Signotec" | |
| help | |
| Support for ViewSonic/Signotec PD1011 signature pad. | |
| config HID_VRC2 | |
| tristate "VRC-2 Car Controller" | |
| depends on HID | |
| help | |
| Support for VRC-2 which is a 2-axis controller often used in | |
| car simulators. | |
| To compile this driver as a module, choose M here: the | |
| module will be called hid-vrc2. | |
| config HID_XIAOMI | |
| tristate "Xiaomi" | |
| help | |
| Adds support for side buttons of Xiaomi Mi Dual Mode Wireless | |
| Mouse Silent Edition. | |
| config HID_GYRATION | |
| tristate "Gyration remote control" | |
| help | |
| Support for Gyration remote control. | |
| config HID_ICADE | |
| tristate "ION iCade arcade controller" | |
| help | |
| Support for the ION iCade arcade controller to work as a joystick. | |
| To compile this driver as a module, choose M here: the | |
| module will be called hid-icade. | |
| config HID_ITE | |
| tristate "ITE devices" | |
| help | |
| Support for ITE devices not fully compliant with HID standard. | |
| config HID_JABRA | |
| tristate "Jabra USB HID Driver" | |
| help | |
| Support for Jabra USB HID devices. | |
| Prevents mapping of vendor defined HID usages to input events. Without | |
| this driver HID reports from Jabra devices may incorrectly be seen as | |
| mouse button events. | |
| Say M here if you may ever plug in a Jabra USB device. | |
| config HID_TWINHAN | |
| tristate "Twinhan IR remote control" | |
| help | |
| Support for Twinhan IR remote control. | |
| config HID_KENSINGTON | |
| tristate "Kensington Slimblade Trackball" | |
| help | |
| Support for Kensington Slimblade Trackball. | |
| config HID_LCPOWER | |
| tristate "LC-Power" | |
| help | |
| Support for LC-Power RC1000MCE RF remote control. | |
| config HID_LED | |
| tristate "Simple RGB LED support" | |
| depends on LEDS_CLASS | |
| help | |
| Support for simple RGB LED devices. Currently supported are: | |
| - Riso Kagaku Webmail Notifier | |
| - Dream Cheeky Webmail Notifier and Friends Alert | |
| - ThingM blink(1) | |
| - Delcom Visual Signal Indicator Generation 2 | |
| - Greynut Luxafor | |
| To compile this driver as a module, choose M here: the | |
| module will be called hid-led. | |
| config HID_LENOVO | |
| tristate "Lenovo / Thinkpad devices" | |
| depends on LEDS_CLASS | |
| help | |
| Support for IBM/Lenovo devices that are not fully compliant with HID standard. | |
| Say Y if you want support for horizontal scrolling of the IBM/Lenovo | |
| Scrollpoint mice or the non-compliant features of the Lenovo Thinkpad | |
| standalone keyboards, e.g: | |
| - ThinkPad USB Keyboard with TrackPoint (supports extra LEDs and trackpoint | |
| configuration) | |
| - ThinkPad Compact Bluetooth Keyboard with TrackPoint (supports Fn keys) | |
| - ThinkPad Compact USB Keyboard with TrackPoint (supports Fn keys) | |
| config HID_LENOVO_GO | |
| tristate "HID Driver for Lenovo Legion Go Series Controllers" | |
| depends on USB_HID | |
| depends on LEDS_CLASS_MULTICOLOR | |
| help | |
| Support for Lenovo Legion Go devices with detachable controllers. | |
| Say Y here to include configuration interface support for the Lenovo Legion Go | |
| and Legion Go 2 Handheld Console Controllers. Say M here to compile this | |
| driver as a module. The module will be called hid-lenovo-go. | |
| config HID_LENOVO_GO_S | |
| tristate "HID Driver for Lenovo Legion Go S Controller" | |
| depends on USB_HID | |
| depends on LEDS_CLASS_MULTICOLOR | |
| help | |
| Support for Lenovo Legion Go S Handheld Console Controller. | |
| Say Y here to include configuration interface support for the Lenovo Legion Go | |
| S. Say M here to compile this driver as a module. The module will be called | |
| hid-lenovo-go-s. | |
| config HID_LETSKETCH | |
| tristate "Letsketch WP9620N tablets" | |
| depends on USB_HID | |
| help | |
| Driver for the LetSketch / VSON WP9620N drawing tablet. This | |
| drawing tablet is also sold under other brand names such as Case U, | |
| presumably this driver will work for all of them. But it has only been | |
| tested with a LetSketch WP9620N model. | |
| These tablets also work without a special HID driver, but then only | |
| part of the active area works and both the pad and stylus buttons are | |
| hardwired to special key-combos. E.g. the 2 stylus buttons send right | |
| mouse clicks / resp. "e" key presses. | |
| config HID_LOGITECH | |
| tristate "Logitech devices" | |
| depends on USB_HID | |
| depends on LEDS_CLASS | |
| depends on LEDS_CLASS_MULTICOLOR | |
| help | |
| Support for Logitech devices that are not fully compliant with HID standard. | |
| config HID_LOGITECH_DJ | |
| tristate "Logitech receivers full support" | |
| depends on USB_HID | |
| depends on HIDRAW | |
| depends on HID_LOGITECH | |
| select HID_LOGITECH_HIDPP | |
| help | |
| Say Y if you want support for Logitech receivers and devices. | |
| Logitech receivers are capable of pairing multiple Logitech compliant | |
| devices to the same receiver. Without this driver it will be handled by | |
| generic USB_HID driver and all incoming events will be multiplexed | |
| into a single mouse and a single keyboard device. | |
| config HID_LOGITECH_HIDPP | |
| tristate "Logitech HID++ devices support" | |
| depends on HID_LOGITECH | |
| select POWER_SUPPLY | |
| help | |
| Support for Logitech devices relying on the HID++ Logitech specification | |
| Say Y if you want support for Logitech devices relying on the HID++ | |
| specification. Such devices are the various Logitech Touchpads (T650, | |
| T651, TK820), some mice (Zone Touch mouse), or even keyboards (Solar | |
| Keyboard). | |
| config LOGITECH_FF | |
| bool "Logitech force feedback support" | |
| depends on HID_LOGITECH | |
| select INPUT_FF_MEMLESS | |
| help | |
| Say Y here if you have one of these devices: | |
| - Logitech WingMan Cordless RumblePad | |
| - Logitech WingMan Cordless RumblePad 2 | |
| - Logitech WingMan Force 3D | |
| and if you want to enable force feedback for them. | |
| Note: if you say N here, this device will still be supported, but without | |
| force feedback. | |
| config LOGIRUMBLEPAD2_FF | |
| bool "Logitech force feedback support (variant 2)" | |
| depends on HID_LOGITECH | |
| select INPUT_FF_MEMLESS | |
| help | |
| Say Y here if you want to enable force feedback support for: | |
| - Logitech RumblePad | |
| - Logitech Rumblepad 2 | |
| - Logitech Formula Vibration Feedback Wheel | |
| config LOGIG940_FF | |
| bool "Logitech Flight System G940 force feedback support" | |
| depends on HID_LOGITECH | |
| select INPUT_FF_MEMLESS | |
| help | |
| Say Y here if you want to enable force feedback support for Logitech | |
| Flight System G940 devices. | |
| config LOGIWHEELS_FF | |
| bool "Logitech wheels configuration and force feedback support" | |
| depends on HID_LOGITECH | |
| select INPUT_FF_MEMLESS | |
| default LOGITECH_FF | |
| help | |
| Say Y here if you want to enable force feedback and range setting(*) | |
| support for following Logitech wheels: | |
| - Logitech G25 (*) | |
| - Logitech G27 (*) | |
| - Logitech G29 (*) | |
| - Logitech Driving Force | |
| - Logitech Driving Force Pro (*) | |
| - Logitech Driving Force GT (*) | |
| - Logitech Driving Force EX/RX | |
| - Logitech Driving Force Wireless | |
| - Logitech Speed Force Wireless | |
| - Logitech MOMO Force | |
| - Logitech MOMO Racing Force | |
| - Logitech Formula Force GP | |
| - Logitech Formula Force EX/RX | |
| - Logitech Wingman Formula Force GP | |
| config HID_MAGICMOUSE | |
| tristate "Apple Magic Mouse/Trackpad multi-touch support" | |
| help | |
| Support for the Apple Magic Mouse/Trackpad multi-touch. | |
| Say Y here if you want support for the multi-touch features of the | |
| Apple Wireless "Magic" Mouse and the Apple Wireless "Magic" Trackpad. | |
| config HID_MALTRON | |
| tristate "Maltron L90 keyboard" | |
| help | |
| Adds support for the volume up, volume down, mute, and play/pause buttons | |
| of the Maltron L90 keyboard. | |
| config HID_MAYFLASH | |
| tristate "Mayflash game controller adapter force feedback" | |
| select INPUT_FF_MEMLESS | |
| help | |
| Say Y here if you have HJZ Mayflash PS3 game controller adapters | |
| and want to enable force feedback support. | |
| config HID_MEGAWORLD_FF | |
| tristate "Mega World based game controller force feedback support" | |
| depends on USB_HID | |
| select INPUT_FF_MEMLESS | |
| help | |
| Say Y here if you have a Mega World based game controller and want | |
| to have force feedback support for it. | |
| config HID_RAKK | |
| tristate "Rakk support" | |
| help | |
| Support for Rakk gaming peripherals. | |
| Fixes the HID report descriptor of the Rakk Dasig X mouse, | |
| which declares USAGE_MAXIMUM=3 (buttons 1-3) while actually | |
| sending 5 button bits. This causes side buttons to be ignored. | |
| config HID_REDRAGON | |
| tristate "Redragon keyboards" | |
| help | |
| Support for Redragon keyboards that need fix-ups to work properly. | |
| config HID_MICROSOFT | |
| tristate "Microsoft non-fully HID-compliant devices" | |
| select INPUT_FF_MEMLESS | |
| help | |
| Support for Microsoft devices that are not fully compliant with HID standard. | |
| config HID_MONTEREY | |
| tristate "Monterey Genius KB29E keyboard" | |
| help | |
| Support for Monterey Genius KB29E. | |
| config HID_MULTITOUCH | |
| tristate "HID Multitouch panels" | |
| help | |
| Generic support for HID multitouch panels. | |
| Say Y here if you have one of the following devices: | |
| - 3M PCT touch screens | |
| - ActionStar dual touch panels | |
| - Apple Touch Bar on x86 MacBook Pros | |
| - Atmel panels | |
| - Cando dual touch panels | |
| - Chunghwa panels | |
| - CJTouch panels | |
| - CVTouch panels | |
| - Cypress TrueTouch panels | |
| - Elan Microelectronics touch panels | |
| - Elo TouchSystems IntelliTouch Plus panels | |
| - GeneralTouch 'Sensing Win7-TwoFinger' panels | |
| - GoodTouch panels | |
| - Hanvon dual touch panels | |
| - Ilitek dual touch panels | |
| - IrTouch Infrared USB panels | |
| - LG Display panels (Dell ST2220Tc) | |
| - Lumio CrystalTouch panels | |
| - MosArt dual-touch panels | |
| - Panasonic multitouch panels | |
| - PenMount dual touch panels | |
| - Perixx Peripad 701 touchpad | |
| - PixArt optical touch screen | |
| - Pixcir dual touch panels | |
| - Quanta panels | |
| - eGalax dual-touch panels, including the Joojoo and Wetab tablets | |
| - SiS multitouch panels | |
| - Stantum multitouch panels | |
| - Touch International Panels | |
| - Unitec Panels | |
| - Wistron optical touch panels | |
| - XAT optical touch panels | |
| - Xiroku optical touch panels | |
| - Zytronic touch panels | |
| If unsure, say N. | |
| To compile this driver as a module, choose M here: the | |
| module will be called hid-multitouch. | |
| config HID_NINTENDO | |
| tristate "Nintendo Joy-Con, NSO, and Pro Controller support" | |
| depends on NEW_LEDS | |
| depends on LEDS_CLASS | |
| select POWER_SUPPLY | |
| help | |
| Adds support for the Nintendo Switch Joy-Cons, NSO, Pro Controller. | |
| All controllers support bluetooth, and the Pro Controller also supports | |
| its USB mode. This also includes support for the Nintendo Switch Online | |
| Controllers which include the NES, Genesis, SNES, and N64 controllers. | |
| To compile this driver as a module, choose M here: the | |
| module will be called hid-nintendo. | |
| config NINTENDO_FF | |
| bool "Nintendo Switch controller force feedback support" | |
| depends on HID_NINTENDO | |
| select INPUT_FF_MEMLESS | |
| help | |
| Say Y here if you have a Nintendo Switch controller and want to enable | |
| force feedback support for it. This works for both joy-cons, the pro | |
| controller, and the NSO N64 controller. For the pro controller, both | |
| rumble motors can be controlled individually. | |
| config HID_NTI | |
| tristate "NTI keyboard adapters" | |
| help | |
| Support for the "extra" Sun keyboard keys on keyboards attached | |
| through Network Technologies USB-SUN keyboard adapters. | |
| config HID_NTRIG | |
| tristate "N-Trig touch screen" | |
| depends on USB_HID | |
| help | |
| Support for N-Trig touch screen. | |
| config HID_NVIDIA_SHIELD | |
| tristate "NVIDIA SHIELD devices" | |
| depends on USB_HID | |
| depends on BT_HIDP | |
| depends on LEDS_CLASS | |
| select POWER_SUPPLY | |
| help | |
| Support for NVIDIA SHIELD accessories. | |
| Supported devices: | |
| - Thunderstrike (NVIDIA SHIELD Controller 2017) | |
| config NVIDIA_SHIELD_FF | |
| bool "NVIDIA SHIELD force feedback support" | |
| depends on HID_NVIDIA_SHIELD | |
| select INPUT_FF_MEMLESS | |
| help | |
| Say Y here if you would like to enable force feedback support for | |
| NVIDIA SHIELD accessories with haptics capabilities. | |
| config HID_ORTEK | |
| tristate "Ortek PKB-1700/WKB-2000/Skycable wireless keyboard and mouse trackpad" | |
| help | |
| There are certain devices which have LogicalMaximum wrong in the keyboard | |
| usage page of their report descriptor. The most prevailing ones so far | |
| are manufactured by Ortek, thus the name of the driver. Currently | |
| supported devices by this driver are | |
| - Ortek PKB-1700 | |
| - Ortek WKB-2000 | |
| - Skycable wireless presenter | |
| config HID_OXP | |
| tristate "OneXPlayer handheld controller configuration support" | |
| depends on USB_HID | |
| depends on LEDS_CLASS | |
| depends on LEDS_CLASS_MULTICOLOR | |
| depends on DMI | |
| help | |
| Say Y here if you would like to enable support for OneXPlayer handheld | |
| devices that come with RGB LED rings around the joysticks and macro buttons. | |
| To compile this driver as a module, choose M here: the module will | |
| be called hid-oxp. | |
| config HID_PANTHERLORD | |
| tristate "Pantherlord/GreenAsia game controller" | |
| help | |
| Say Y here if you have a PantherLord/GreenAsia based game controller | |
| or adapter. | |
| config PANTHERLORD_FF | |
| bool "Pantherlord force feedback support" | |
| depends on HID_PANTHERLORD | |
| select INPUT_FF_MEMLESS | |
| help | |
| Say Y here if you have a PantherLord/GreenAsia based game controller | |
| or adapter and want to enable force feedback support for it. | |
| config HID_PENMOUNT | |
| tristate "Penmount touch device" | |
| depends on USB_HID | |
| help | |
| This selects a driver for the PenMount 6000 touch controller. | |
| The driver works around a problem in the report descript allowing | |
| the userspace to touch events instead of mouse events. | |
| Say Y here if you have a Penmount based touch controller. | |
| config HID_PETALYNX | |
| tristate "Petalynx Maxter remote control" | |
| help | |
| Support for Petalynx Maxter remote control. | |
| config HID_PICOLCD | |
| tristate "PicoLCD (graphic version)" | |
| help | |
| This provides support for Minibox PicoLCD devices, currently | |
| only the graphical ones are supported. | |
| This includes support for the following device features: | |
| - Keypad | |
| - Switching between Firmware and Flash mode | |
| - EEProm / Flash access (via debugfs) | |
| Features selectively enabled: | |
| - Framebuffer for monochrome 256x64 display | |
| - Backlight control | |
| - Contrast control | |
| - General purpose outputs | |
| Features that are not (yet) supported: | |
| - IR | |
| config HID_PICOLCD_FB | |
| bool "Framebuffer support" if EXPERT | |
| default !EXPERT | |
| depends on HID_PICOLCD | |
| depends on HID_PICOLCD=FB || FB=y | |
| select FB_SYSMEM_HELPERS_DEFERRED | |
| help | |
| Provide access to PicoLCD's 256x64 monochrome display via a | |
| framebuffer device. | |
| config HID_PICOLCD_BACKLIGHT | |
| bool "Backlight control" if EXPERT | |
| default !EXPERT | |
| depends on HID_PICOLCD | |
| depends on HID_PICOLCD=BACKLIGHT_CLASS_DEVICE || BACKLIGHT_CLASS_DEVICE=y | |
| help | |
| Provide access to PicoLCD's backlight control via backlight | |
| class. | |
| config HID_PICOLCD_LCD | |
| bool "Contrast control" if EXPERT | |
| default !EXPERT | |
| depends on HID_PICOLCD | |
| depends on HID_PICOLCD=LCD_CLASS_DEVICE || LCD_CLASS_DEVICE=y | |
| help | |
| Provide access to PicoLCD's LCD contrast via lcd class. | |
| config HID_PICOLCD_LEDS | |
| bool "GPO via leds class" if EXPERT | |
| default !EXPERT | |
| depends on HID_PICOLCD | |
| depends on HID_PICOLCD=LEDS_CLASS || LEDS_CLASS=y | |
| help | |
| Provide access to PicoLCD's GPO pins via leds class. | |
| config HID_PICOLCD_CIR | |
| bool "CIR via RC class" if EXPERT | |
| default !EXPERT | |
| depends on HID_PICOLCD | |
| depends on HID_PICOLCD=RC_CORE || RC_CORE=y | |
| help | |
| Provide access to PicoLCD's CIR interface via remote control (LIRC). | |
| config HID_PLANTRONICS | |
| tristate "Plantronics USB HID Driver" | |
| help | |
| Provides HID support for Plantronics USB audio devices. | |
| Correctly maps vendor unique volume up/down HID usages to | |
| KEY_VOLUMEUP and KEY_VOLUMEDOWN events and prevents core mapping | |
| of other vendor unique HID usages to random mouse events. | |
| Say M here if you may ever plug in a Plantronics USB audio device. | |
| config HID_PLAYSTATION | |
| tristate "PlayStation HID Driver" | |
| depends on LEDS_CLASS_MULTICOLOR | |
| select CRC32 | |
| select POWER_SUPPLY | |
| help | |
| Provides support for Sony PS4/PS5 controllers including support for | |
| its special functionalities e.g. touchpad, lights and motion | |
| sensors. | |
| config PLAYSTATION_FF | |
| bool "PlayStation force feedback support" | |
| depends on HID_PLAYSTATION | |
| select INPUT_FF_MEMLESS | |
| help | |
| Say Y here if you would like to enable force feedback support for | |
| PlayStation game controllers. | |
| config HID_PXRC | |
| tristate "PhoenixRC HID Flight Controller" | |
| depends on HID | |
| help | |
| Support for PhoenixRC HID Flight Controller, a 8-axis flight controller. | |
| To compile this driver as a module, choose M here: the | |
| module will be called hid-pxrc. | |
| config HID_RAPOO | |
| tristate "Rapoo non-fully HID-compliant devices" | |
| help | |
| Support for Rapoo devices that are not fully compliant with the | |
| HID standard. | |
| config HID_RAZER | |
| tristate "Razer non-fully HID-compliant devices" | |
| help | |
| Support for Razer devices that are not fully compliant with the | |
| HID standard. | |
| config HID_PRIMAX | |
| tristate "Primax non-fully HID-compliant devices" | |
| help | |
| Support for Primax devices that are not fully compliant with the | |
| HID standard. | |
| config HID_RETRODE | |
| tristate "Retrode 2 USB adapter for vintage video games" | |
| depends on USB_HID | |
| help | |
| Support for | |
| * Retrode 2 cartridge and controller adapter | |
| config HID_ROCCAT | |
| tristate "Roccat device support" | |
| depends on USB_HID | |
| help | |
| Support for Roccat devices. | |
| Say Y here if you have a Roccat mouse or keyboard and want | |
| support for its special functionalities. | |
| config HID_SAITEK | |
| tristate "Saitek (Mad Catz) non-fully HID-compliant devices" | |
| help | |
| Support for Saitek devices that are not fully compliant with the | |
| HID standard. | |
| Supported devices: | |
| - PS1000 Dual Analog Pad | |
| - Saitek R.A.T.7, R.A.T.9, M.M.O.7 Gaming Mice | |
| - Mad Catz R.A.T.5, R.A.T.9 Gaming Mice | |
| config HID_SAMSUNG | |
| tristate "Samsung InfraRed remote control or keyboards" | |
| depends on USB_HID | |
| help | |
| Support for Samsung InfraRed remote control or keyboards. | |
| config HID_SEMITEK | |
| tristate "Semitek USB keyboards" | |
| help | |
| Support for Semitek USB keyboards that are not fully compliant | |
| with the HID standard. | |
| There are many variants, including: | |
| - GK61, GK64, GK68, GK84, GK96, etc. | |
| - SK61, SK64, SK68, SK84, SK96, etc. | |
| - Dierya DK61/DK66 | |
| - Tronsmart TK09R | |
| - Woo-dy | |
| - X-Bows Nature/Knight | |
| config HID_SIGMAMICRO | |
| tristate "SiGma Micro-based keyboards" | |
| depends on USB_HID | |
| help | |
| Support for keyboards that use the SiGma Micro (a.k.a SigmaChip) IC. | |
| Supported devices: | |
| - Landslides KR-700 | |
| - Rapoo V500 | |
| config HID_SONY | |
| tristate "Sony PS2/3/4/5 accessories" | |
| depends on USB_HID | |
| depends on NEW_LEDS | |
| depends on LEDS_CLASS | |
| select POWER_SUPPLY | |
| select CRC32 | |
| help | |
| Support for | |
| * Sixaxis controllers for PS3 | |
| * Buzz controllers | |
| * Blu-ray Disc Remote Control for PS3 | |
| * Logitech Harmony adapter for PS3 | |
| * Guitar Hero Live PS3, Wii U and PS4 guitars | |
| * Guitar Hero PS3 and PC guitars | |
| * Rock Band 1, 2 and 3 PS3 and Wii instruments | |
| * Rock Band 4 PS4 and PS5 guitars | |
| * DJ Hero Turntable for PS3 | |
| config SONY_FF | |
| bool "Sony PS2/3/4 accessories force feedback support" | |
| depends on HID_SONY | |
| select INPUT_FF_MEMLESS | |
| help | |
| Say Y here if you have a Sony PS2/3/4 accessory and want to enable | |
| force feedback support for it. | |
| config HID_SPEEDLINK | |
| tristate "Speedlink VAD Cezanne mouse support" | |
| help | |
| Support for Speedlink Vicious and Divine Cezanne mouse. | |
| config HID_STEAM | |
| tristate "Steam Controller/Deck support" | |
| select POWER_SUPPLY | |
| help | |
| Say Y here if you have a Steam Controller or Deck if you want to use it | |
| without running the Steam Client. It supports both the wired and | |
| the wireless adaptor. | |
| config STEAM_FF | |
| bool "Steam Deck force feedback support" | |
| depends on HID_STEAM | |
| select INPUT_FF_MEMLESS | |
| help | |
| Say Y here if you want to enable force feedback support for the Steam | |
| Deck. | |
| config HID_STEELSERIES | |
| tristate "Steelseries devices support" | |
| depends on USB_HID | |
| help | |
| Support for Steelseries SRW-S1 steering wheel, and the Steelseries | |
| Arctis 1 Wireless for XBox headset. | |
| config HID_SUNPLUS | |
| tristate "Sunplus wireless desktop" | |
| help | |
| Support for Sunplus wireless desktop. | |
| config HID_RMI | |
| tristate "Synaptics RMI4 device support" | |
| select RMI4_CORE | |
| select RMI4_F03 | |
| select RMI4_F11 | |
| select RMI4_F12 | |
| select RMI4_F30 | |
| select RMI4_F3A | |
| help | |
| Support for Synaptics RMI4 touchpads. | |
| Say Y here if you have a Synaptics RMI4 touchpads over i2c-hid or usbhid | |
| and want support for its special functionalities. | |
| config HID_GREENASIA | |
| tristate "GreenAsia (Product ID 0x12) game controller support" | |
| help | |
| Say Y here if you have a GreenAsia (Product ID 0x12) based game | |
| controller or adapter. | |
| config GREENASIA_FF | |
| bool "GreenAsia (Product ID 0x12) force feedback support" | |
| depends on HID_GREENASIA | |
| select INPUT_FF_MEMLESS | |
| help | |
| Say Y here if you have a GreenAsia (Product ID 0x12) based game controller | |
| (like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter | |
| and want to enable force feedback support for it. | |
| config HID_HYPERV_MOUSE | |
| tristate "Microsoft Hyper-V mouse driver" | |
| depends on HYPERV_VMBUS | |
| help | |
| Select this option to enable the Hyper-V mouse driver. | |
| config HID_SMARTJOYPLUS | |
| tristate "SmartJoy PLUS PS2/USB adapter support" | |
| help | |
| Support for SmartJoy PLUS PS2/USB adapter, Super Dual Box, | |
| Super Joy Box 3 Pro, Super Dual Box Pro, and Super Joy Box 5 Pro. | |
| Note that DDR (Dance Dance Revolution) mode is not supported, nor | |
| is pressure sensitive buttons on the pro models. | |
| config SMARTJOYPLUS_FF | |
| bool "SmartJoy PLUS PS2/USB adapter force feedback support" | |
| depends on HID_SMARTJOYPLUS | |
| select INPUT_FF_MEMLESS | |
| help | |
| Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to | |
| enable force feedback support for it. | |
| config HID_TIVO | |
| tristate "TiVo Slide Bluetooth remote control support" | |
| help | |
| Say Y if you have a TiVo Slide Bluetooth remote control. | |
| config HID_TOPSEED | |
| tristate "TopSeed Cyberlink, BTC Emprex, Conceptronic remote control support" | |
| help | |
| Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic | |
| CLLRCMCE remote control. | |
| config HID_TOPRE | |
| tristate "Topre REALFORCE keyboards" | |
| depends on HID | |
| help | |
| Say Y for N-key rollover support on Topre REALFORCE R2 108/87 key and | |
| Topre REALFORCE R3S 87 key keyboards. | |
| config HID_THINGM | |
| tristate "ThingM blink(1) USB RGB LED" | |
| depends on LEDS_CLASS | |
| select HID_LED | |
| help | |
| Support for the ThingM blink(1) USB RGB LED. This driver has been | |
| merged into the generic hid led driver. Config symbol HID_THINGM | |
| just selects HID_LED and will be removed soon. | |
| config HID_THRUSTMASTER | |
| tristate "ThrustMaster devices support" | |
| depends on USB_HID | |
| help | |
| Say Y here if you have a THRUSTMASTER FireStore Dual Power 2, | |
| a THRUSTMASTER Ferrari GT Rumble Wheel or Thrustmaster FFB | |
| Wheel (T150RS, T300RS, T300 Ferrari Alcantara Edition, T500RS). | |
| config THRUSTMASTER_FF | |
| bool "ThrustMaster devices force feedback support" | |
| depends on HID_THRUSTMASTER | |
| select INPUT_FF_MEMLESS | |
| help | |
| Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or 3, | |
| a THRUSTMASTER Dual Trigger 3-in-1 or a THRUSTMASTER Ferrari GT | |
| Rumble Force or Force Feedback Wheel. | |
| config HID_UDRAW_PS3 | |
| tristate "THQ PS3 uDraw tablet" | |
| help | |
| Say Y here if you want to use the THQ uDraw gaming tablet for | |
| the PS3. | |
| config HID_U2FZERO | |
| tristate "U2F Zero LED and RNG support" | |
| depends on USB_HID | |
| depends on LEDS_CLASS | |
| depends on HW_RANDOM | |
| help | |
| Support for the LED of the U2F Zero device. | |
| U2F Zero supports custom commands for blinking the LED | |
| and getting data from the internal hardware RNG. | |
| The internal hardware can be used to feed the entropy pool. | |
| U2F Zero only supports blinking its LED, so this driver doesn't | |
| allow setting the brightness to anything but 1, which will | |
| trigger a single blink and immediately reset back to 0. | |
| config HID_UNIVERSAL_PIDFF | |
| tristate "universal-pidff: extended USB PID driver compatibility and usage" | |
| depends on USB_HID | |
| depends on HID_PID | |
| help | |
| Extended PID support for selected devices. | |
| Contains report fixups, extended usable button range and | |
| pidff quirk management to extend compatibility with slightly | |
| non-compliant USB PID devices and better fuzz/flat values for | |
| high precision direct drive devices. | |
| Supports Moza Racing, Cammus, VRS, FFBeast and more. | |
| config HID_WACOM | |
| tristate "Wacom Intuos/Graphire tablet support (USB)" | |
| depends on USB_HID | |
| select POWER_SUPPLY | |
| select NEW_LEDS | |
| select LEDS_CLASS | |
| select LEDS_TRIGGERS | |
| help | |
| Say Y here if you want to use the USB or BT version of the Wacom Intuos | |
| or Graphire tablet. | |
| To compile this driver as a module, choose M here: the | |
| module will be called wacom. | |
| config HID_WIIMOTE | |
| tristate "Nintendo Wii / Wii U peripherals" | |
| depends on LEDS_CLASS | |
| select POWER_SUPPLY | |
| select INPUT_FF_MEMLESS | |
| help | |
| Support for Nintendo Wii and Wii U Bluetooth peripherals. Supported | |
| devices are the Wii Remote and its extension devices, but also devices | |
| based on the Wii Remote like the Wii U Pro Controller or the | |
| Wii Balance Board. | |
| Support for all official Nintendo extensions is available, however, 3rd | |
| party extensions might not be supported. Please report these devices to: | |
| http://github.com/dvdhrm/xwiimote/issues | |
| Other Nintendo Wii U peripherals that are IEEE 802.11 based (including | |
| the Wii U Gamepad) might be supported in the future. But currently | |
| support is limited to Bluetooth based devices. | |
| If unsure, say N. | |
| To compile this driver as a module, choose M here: the | |
| module will be called hid-wiimote. | |
| config HID_WINWING | |
| tristate "WinWing Orion2 throttle support" | |
| depends on USB_HID | |
| depends on NEW_LEDS | |
| depends on LEDS_CLASS | |
| help | |
| Support for WinWing Orion2 throttle base with the following grips: | |
| * TGRIP-15E | |
| * TGRIP-15EX | |
| * TGRIP-16EX | |
| * TGRIP-18 | |
| This driver enables all buttons and switches on the throttle base. | |
| To compile this driver as a module, choose M here: the | |
| module will be called hid-winwing. | |
| config HID_XINMO | |
| tristate "Xin-Mo non-fully compliant devices" | |
| help | |
| Support for Xin-Mo devices that are not fully compliant with the HID | |
| standard. Currently only supports the Xin-Mo Dual Arcade. Say Y here | |
| if you have a Xin-Mo Dual Arcade controller. | |
| config HID_ZEROPLUS | |
| tristate "Zeroplus based game controller support" | |
| help | |
| Say Y here if you have a Zeroplus based game controller. | |
| config ZEROPLUS_FF | |
| bool "Zeroplus based game controller force feedback support" | |
| depends on HID_ZEROPLUS | |
| select INPUT_FF_MEMLESS | |
| help | |
| Say Y here if you have a Zeroplus based game controller and want | |
| to have force feedback support for it. | |
| config HID_ZYDACRON | |
| tristate "Zydacron remote control support" | |
| help | |
| Support for Zydacron remote control. | |
| config HID_SENSOR_HUB | |
| tristate "HID Sensors framework support" | |
| depends on HAS_IOMEM | |
| select MFD_CORE | |
| default n | |
| help | |
| Support for HID Sensor framework. This creates a MFD instance | |
| for a sensor hub and identifies all the sensors connected to it. | |
| Each sensor is registered as a MFD cell, so that sensor specific | |
| processing can be done in a separate driver. Each sensor | |
| drivers can use the service provided by this driver to register | |
| for events and handle data streams. Each sensor driver can format | |
| data and present to user mode using input or IIO interface. | |
| config HID_SENSOR_CUSTOM_SENSOR | |
| tristate "HID Sensors hub custom sensor support" | |
| depends on HID_SENSOR_HUB | |
| default n | |
| help | |
| HID Sensor hub specification allows definition of some custom and | |
| generic sensors. Unlike other HID sensors, they can't be exported | |
| via Linux IIO because of custom fields. This is up to the manufacturer | |
| to decide how to interpret these special sensor ids and process in | |
| the user space. Currently some manufacturers are using these ids for | |
| sensor calibration and debugging other sensors. Manufacturers | |
| shouldn't use these special custom sensor ids to export any of the | |
| standard sensors. | |
| Select this config option for custom/generic sensor support. | |
| config HID_ALPS | |
| tristate "Alps HID device support" | |
| help | |
| Support for Alps I2C HID touchpads and StickPointer. | |
| Say Y here if you have a Alps touchpads over i2c-hid or usbhid | |
| and want support for its special functionalities. | |
| config HID_MCP2200 | |
| tristate "Microchip MCP2200 HID USB-to-GPIO bridge" | |
| depends on USB_HID && GPIOLIB | |
| help | |
| Provides GPIO functionality over USB-HID through MCP2200 device. | |
| To compile this driver as a module, choose M here: the module | |
| will be called hid-mcp2200.ko. | |
| config HID_MCP2221 | |
| tristate "Microchip MCP2221 HID USB-to-I2C/SMbus host support" | |
| depends on USB_HID && I2C | |
| imply GPIOLIB | |
| imply IIO | |
| help | |
| Provides I2C and SMBUS host adapter functionality over USB-HID | |
| through MCP2221 device. | |
| To compile this driver as a module, choose M here: the module | |
| will be called hid-mcp2221.ko. | |
| config HID_KUNIT_TEST | |
| tristate "KUnit tests for HID" if !KUNIT_ALL_TESTS | |
| depends on KUNIT | |
| depends on HID_BATTERY_STRENGTH | |
| depends on HID_UCLOGIC | |
| default KUNIT_ALL_TESTS | |
| help | |
| This builds unit tests for HID. This option is not useful for | |
| distributions or general kernels, but only for kernel | |
| developers working on HID and associated drivers. | |
| For more information on KUnit and unit tests in general, | |
| please refer to the KUnit documentation in | |
| Documentation/dev-tools/kunit/. | |
| If in doubt, say "N". | |
| config HID_HUAWEI | |
| tristate "Huawei HID devices support" | |
| depends on USB_HID | |
| help | |
| Support for huawei cd30 keyboard or other hid devices | |
| that need fix-ups to work properly. | |
| endmenu | |
| source "drivers/hid/bpf/Kconfig" | |
| source "drivers/hid/i2c-hid/Kconfig" | |
| source "drivers/hid/intel-ish-hid/Kconfig" | |
| source "drivers/hid/amd-sfh-hid/Kconfig" | |
| source "drivers/hid/surface-hid/Kconfig" | |
| source "drivers/hid/intel-thc-hid/Kconfig" | |
| endif # HID | |
| # USB support may be used with HID disabled | |
| source "drivers/hid/usbhid/Kconfig" | |
| endif # HID_SUPPORT |