blob: a2330bf83695a8da6fac9febfbf6458bb45acb0e [file] [log] [blame]
/* linux/include/asm-arm/arch-s3c2410/hardware.h
*
* (c) 2003 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - hardware
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
* 21-May-2003 BJD Created file
* 06-Jun-2003 BJD Added CPU frequency settings
* 03-Sep-2003 BJD Linux v2.6 support
* 12-Mar-2004 BJD Fixed include protection, fixed type of clock vars
* 14-Sep-2004 BJD Added misccr and getpin to gpio
* 01-Oct-2004 BJD Added the new gpio functions
* 16-Oct-2004 BJD Removed the clock variables
* 15-Jan-2006 LCVR Added s3c2400_gpio_getirq()
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#ifndef __ASSEMBLY__
/* external functions for GPIO support
*
* These allow various different clients to access the same GPIO
* registers without conflicting. If your driver only owns the entire
* GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
*/
/* s3c2410_gpio_cfgpin
*
* set the configuration of the given pin to the value passed.
*
* eg:
* s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
* s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
*/
extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
/* s3c2410_gpio_getirq
*
* turn the given pin number into the corresponding IRQ number
*
* returns:
* < 0 = no interrupt for this pin
* >=0 = interrupt number for the pin
*/
extern int s3c2410_gpio_getirq(unsigned int pin);
#ifdef CONFIG_CPU_S3C2400
extern int s3c2400_gpio_getirq(unsigned int pin);
#endif /* CONFIG_CPU_S3C2400 */
/* s3c2410_gpio_irqfilter
*
* set the irq filtering on the given pin
*
* on = 0 => disable filtering
* 1 => enable filtering
*
* config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
* width of filter (0 through 63)
*
*
*/
extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
unsigned int config);
/* s3c2410_gpio_pullup
*
* configure the pull-up control on the given pin
*
* to = 1 => disable the pull-up
* 0 => enable the pull-up
*
* eg;
*
* s3c2410_gpio_pullup(S3C2410_GPB0, 0);
* s3c2410_gpio_pullup(S3C2410_GPE8, 0);
*/
extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
#ifdef CONFIG_CPU_S3C2440
extern int s3c2440_set_dsc(unsigned int pin, unsigned int value);
#endif /* CONFIG_CPU_S3C2440 */
#endif /* __ASSEMBLY__ */
#include <asm/sizes.h>
#include <asm/arch/map.h>
/* machine specific hardware definitions should go after this */
/* currently here until moved into config (todo) */
#define CONFIG_NO_MULTIWORD_IO
#endif /* __ASM_ARCH_HARDWARE_H */