blob: 825c3405f5c2121fb57d95789bf7a6e83aef0209 [file] [log] [blame]
/*
* Geode GX display controller.
*
* Copyright (C) 2005 Arcom Control Systems Ltd.
*
* Portions from AMD's original 2.4 driver:
* Copyright (C) 2004 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by * the
* Free Software Foundation; either version 2 of the License, or * (at your
* option) any later version.
*/
#include <linux/spinlock.h>
#include <linux/fb.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <asm/div64.h>
#include <asm/delay.h>
#include "geodefb.h"
#include "display_gx.h"
int gx_frame_buffer_size(void)
{
/* Assuming 16 MiB. */
return 16*1024*1024;
}
int gx_line_delta(int xres, int bpp)
{
/* Must be a multiple of 8 bytes. */
return (xres * (bpp >> 3) + 7) & ~0x7;
}
static void gx_set_mode(struct fb_info *info)
{
struct geodefb_par *par = info->par;
u32 gcfg, dcfg;
int hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal;
int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
/* Unlock the display controller registers. */
readl(par->dc_regs + DC_UNLOCK);
writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
gcfg = readl(par->dc_regs + DC_GENERAL_CFG);
dcfg = readl(par->dc_regs + DC_DISPLAY_CFG);
/* Disable the timing generator. */
dcfg &= ~(DC_DCFG_TGEN);
writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
/* Wait for pending memory requests before disabling the FIFO load. */
udelay(100);
/* Disable FIFO load and compression. */
gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
/* Setup DCLK and its divisor. */
par->vid_ops->set_dclk(info);
/*
* Setup new mode.
*/
/* Clear all unused feature bits. */
gcfg &= DC_GCFG_YUVM | DC_GCFG_VDSE;
dcfg = 0;
/* Set FIFO priority (default 6/5) and enable. */
/* FIXME: increase fifo priority for 1280x1024 and higher modes? */
gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE;
/* Framebuffer start offset. */
writel(0, par->dc_regs + DC_FB_ST_OFFSET);
/* Line delta and line buffer length. */
writel(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH);
writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
par->dc_regs + DC_LINE_SIZE);
/* Enable graphics and video data and unmask address lines. */
dcfg |= DC_DCFG_GDEN | DC_DCFG_VDEN | DC_DCFG_A20M | DC_DCFG_A18M;
/* Set pixel format. */
switch (info->var.bits_per_pixel) {
case 8:
dcfg |= DC_DCFG_DISP_MODE_8BPP;
break;
case 16:
dcfg |= DC_DCFG_DISP_MODE_16BPP;
dcfg |= DC_DCFG_16BPP_MODE_565;
break;
case 32:
dcfg |= DC_DCFG_DISP_MODE_24BPP;
dcfg |= DC_DCFG_PALB;
break;
}
/* Enable timing generator. */
dcfg |= DC_DCFG_TGEN;
/* Horizontal and vertical timings. */
hactive = info->var.xres;
hblankstart = hactive;
hsyncstart = hblankstart + info->var.right_margin;
hsyncend = hsyncstart + info->var.hsync_len;
hblankend = hsyncend + info->var.left_margin;
htotal = hblankend;
vactive = info->var.yres;
vblankstart = vactive;
vsyncstart = vblankstart + info->var.lower_margin;
vsyncend = vsyncstart + info->var.vsync_len;
vblankend = vsyncend + info->var.upper_margin;
vtotal = vblankend;
writel((hactive - 1) | ((htotal - 1) << 16), par->dc_regs + DC_H_ACTIVE_TIMING);
writel((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING);
writel((hsyncstart - 1) | ((hsyncend - 1) << 16), par->dc_regs + DC_H_SYNC_TIMING);
writel((vactive - 1) | ((vtotal - 1) << 16), par->dc_regs + DC_V_ACTIVE_TIMING);
writel((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING);
writel((vsyncstart - 1) | ((vsyncend - 1) << 16), par->dc_regs + DC_V_SYNC_TIMING);
/* Write final register values. */
writel(dcfg, par->dc_regs + DC_DISPLAY_CFG);
writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
par->vid_ops->configure_display(info);
/* Relock display controller registers */
writel(0, par->dc_regs + DC_UNLOCK);
}
static void gx_set_hw_palette_reg(struct fb_info *info, unsigned regno,
unsigned red, unsigned green, unsigned blue)
{
struct geodefb_par *par = info->par;
int val;
/* Hardware palette is in RGB 8-8-8 format. */
val = (red << 8) & 0xff0000;
val |= (green) & 0x00ff00;
val |= (blue >> 8) & 0x0000ff;
writel(regno, par->dc_regs + DC_PAL_ADDRESS);
writel(val, par->dc_regs + DC_PAL_DATA);
}
struct geode_dc_ops gx_dc_ops = {
.set_mode = gx_set_mode,
.set_palette_reg = gx_set_hw_palette_reg,
};