| .. SPDX-License-Identifier: GPL-2.0 |
| |
| .. include:: <isonum.txt> |
| |
| =============================== |
| Bus lock detection and handling |
| =============================== |
| |
| :Copyright: |copy| 2021 Intel Corporation |
| :Authors: - Fenghua Yu <fenghua.yu@intel.com> |
| - Tony Luck <tony.luck@intel.com> |
| |
| Problem |
| ======= |
| |
| A split lock is any atomic operation whose operand crosses two cache lines. |
| Since the operand spans two cache lines and the operation must be atomic, |
| the system locks the bus while the CPU accesses the two cache lines. |
| |
| A bus lock is acquired through either split locked access to writeback (WB) |
| memory or any locked access to non-WB memory. This is typically thousands of |
| cycles slower than an atomic operation within a cache line. It also disrupts |
| performance on other cores and brings the whole system to its knees. |
| |
| Detection |
| ========= |
| |
| Intel processors may support either or both of the following hardware |
| mechanisms to detect split locks and bus locks. Some AMD processors also |
| support bus lock detect. |
| |
| #AC exception for split lock detection |
| -------------------------------------- |
| |
| Beginning with the Tremont Atom CPU split lock operations may raise an |
| Alignment Check (#AC) exception when a split lock operation is attempted. |
| |
| #DB exception for bus lock detection |
| ------------------------------------ |
| |
| Some CPUs have the ability to notify the kernel by an #DB trap after a user |
| instruction acquires a bus lock and is executed. This allows the kernel to |
| terminate the application or to enforce throttling. |
| |
| Software handling |
| ================= |
| |
| The kernel #AC and #DB handlers handle bus lock based on the kernel |
| parameter "split_lock_detect". Here is a summary of different options: |
| |
| +------------------+----------------------------+-----------------------+ |
| |split_lock_detect=|#AC for split lock |#DB for bus lock | |
| +------------------+----------------------------+-----------------------+ |
| |off |Do nothing |Do nothing | |
| +------------------+----------------------------+-----------------------+ |
| |warn |Kernel OOPs |Warn once per task and | |
| |(default) |Warn once per task, add a |and continues to run. | |
| | |delay, add synchronization | | |
| | |to prevent more than one | | |
| | |core from executing a | | |
| | |split lock in parallel. | | |
| | |sysctl split_lock_mitigate | | |
| | |can be used to avoid the | | |
| | |delay and synchronization | | |
| | |When both features are | | |
| | |supported, warn in #AC | | |
| +------------------+----------------------------+-----------------------+ |
| |fatal |Kernel OOPs |Send SIGBUS to user. | |
| | |Send SIGBUS to user | | |
| | |When both features are | | |
| | |supported, fatal in #AC | | |
| +------------------+----------------------------+-----------------------+ |
| |ratelimit:N |Do nothing |Limit bus lock rate to | |
| |(0 < N <= 1000) | |N bus locks per second | |
| | | |system wide and warn on| |
| | | |bus locks. | |
| +------------------+----------------------------+-----------------------+ |
| |
| Usages |
| ====== |
| |
| Detecting and handling bus lock may find usages in various areas: |
| |
| It is critical for real time system designers who build consolidated real |
| time systems. These systems run hard real time code on some cores and run |
| "untrusted" user processes on other cores. The hard real time cannot afford |
| to have any bus lock from the untrusted processes to hurt real time |
| performance. To date the designers have been unable to deploy these |
| solutions as they have no way to prevent the "untrusted" user code from |
| generating split lock and bus lock to block the hard real time code to |
| access memory during bus locking. |
| |
| It's also useful for general computing to prevent guests or user |
| applications from slowing down the overall system by executing instructions |
| with bus lock. |
| |
| |
| Guidance |
| ======== |
| off |
| --- |
| |
| Disable checking for split lock and bus lock. This option can be useful if |
| there are legacy applications that trigger these events at a low rate so |
| that mitigation is not needed. |
| |
| warn |
| ---- |
| |
| A warning is emitted when a bus lock is detected which allows to identify |
| the offending application. This is the default behavior. |
| |
| fatal |
| ----- |
| |
| In this case, the bus lock is not tolerated and the process is killed. |
| |
| ratelimit |
| --------- |
| |
| A system wide bus lock rate limit N is specified where 0 < N <= 1000. This |
| allows a bus lock rate up to N bus locks per second. When the bus lock rate |
| is exceeded then any task which is caught via the buslock #DB exception is |
| throttled by enforced sleeps until the rate goes under the limit again. |
| |
| This is an effective mitigation in cases where a minimal impact can be |
| tolerated, but an eventual Denial of Service attack has to be prevented. It |
| allows to identify the offending processes and analyze whether they are |
| malicious or just badly written. |
| |
| Selecting a rate limit of 1000 allows the bus to be locked for up to about |
| seven million cycles each second (assuming 7000 cycles for each bus |
| lock). On a 2 GHz processor that would be about 0.35% system slowdown. |
